BREAKING, DRILLING & FIXING

Transcription

1 BREAKING, DRILLING & FIXING CORDLESS COMBI DRILL SFH22 22v CORDLESS SDS HAMMER DRILL TE 4-A22 Hire Depots - Nationwide Unbeaten performance and battery capacity in its class (18v to 24v) Best performance-to-size ratio Extremely versatile with 3 speed for high torque, wider range of applications and durability Accurate charge status display Hammer drilling in masonry, driving screws, drilling in wood and metal, cutting recesses with whole saws HHD-18V V No-load speed rpm Operating weight 2.6 kg 36V CORDLESS ROTARY HAMMER DRILL Dust Removal System: TE DRS-6-A 96 TE6-A36 Ergonomically designed D-grip for comfortable use over long periods Robustly built and superbly engineered for cordless optimization Excellent performance and best battery capacity for a tool of this weight Outstanding working comfort thanks to AVR Active Vibration Reduction Virtually dustless drilling with the DRS-6-A dust removal system Drilling and hammer drilling in concrete and masonry Occasional drilling in wood/steel with optional quick-release chuck HHD-36VRE V No-load speed 1040 rpm Optimum drilling diameter range for hammer drill bits Operating weight 4 kg 6 16 mm HOLLOW DRILL BIT RANGE Ask in Store for full range and details HILTI proud to supply Charles Wilson Engineers Limited. Dust Removal System: TE DRS-4-A m/s 88 2 Ergonomically designed D-grip for comfortable use over long periods Robustly built and superbly engineered for cordless optimization Excellent performance-to-weight ratio and compact design Hilti CPC Li-ion technology featuring accurate battery charge status display and individual battery cell monitoring for maximum service life Virtually dustless drilling with the DRS-4-A dust removal system Drilling and hammer drilling in concrete and masonry. Occasional drilling in wood and steel with optional chuck adapter. Drilling in concrete in clean areas using the integrated dust removal system (DRS-4-A). Screw driving using the special bit holder with TE-C (SDS Plus) connection end. HHD-24VRE Power Lithium-ion Battery 21.6V x 3.3Ah = 72Wh) Operating weight 3 kg Drill max steel 13mm Drill max wood 27mm HEAVY DUTY CORDLESS COMBI DRILL TE 30A Higher productivity through greater mobility Brushless motor for best-in-class performance and efficiency High-capacity battery and powerful charger for short charging times, allowing a full day's work with one battery The unique Active Torque Control (ATC) stops the motor almost instantly if the bit binds and the housing begins to rotate too quickly Active Vibration Reduction (AVR) system achieves the lowest vibration in this tool class Drilling anchor holes and through-holes in concrete/masonry, dia. range 4-28mm, rec.range mm. Corrective chiselling. Drilling with the optional quick-release chuck. HHD-36VRE Power 36 V Lithium-ion Battery 5.5 kg Max Speed 850 rpm Hammering 4500impacts/min frequency Max Drilling dia. 28 mm

2 ELECTRIC SCREWDRIVER In partnership with HILTI MIXING DRILL BREAKING, DRILLING & FIXING Universal screwdriver for a wide range of applications in metal construction Torque clutch helps prevent over-driving or screw head breakage Depth gauge function controls compression of the sealing washer for optimum sealing Attaching sheet metal to sheet metal Attaching sandwich panels to steel or wood substructures Attaching sheet metal to steel or aluminum substructures, Attaching trapezoidal profile sheets to liner trays. FIX-SDRIVE Max. Torque 22Nm 1.9kg 1/2" IMPACT WRENCH 3.5 *also available in cordless 3/4" IMPACT WRENCH Robust, reliable and quick. Our impact wrenches are ideal for loosening / re-tightening stubborn nuts and bolts, allowing you to leave the spanner in the tool box. FIX-WRNCH : w 3.3kg 00 Square Drive Torque 0.5"/13mm 250Nm A powerful hand held mixer for mixing paints, textured finishes and resins in bulk. It s also ideal for mixing small quantities of plaster. Electronic control for slow, splash free starting. FIX-WRNCH : 650w 5.6kg Square Drive Torque HHD-MIXD kg PowerRating 1150w "/19mm 588Nm Telephone your nearest Hire Depot 63 63

3 Small Duty Hammer Drill TE 2 ROTARY HAMMER DRILLS Medium Duty Heavy Duty Hammer Drill TE 7-C Hammer Drill TE 30-C Hire Depots - Nationwide - Chuck - SDS+ Chuck - SDS+ Chuck - SDS VC20 VACUUM MODEL Operating weight HILTI TE 2 2.7kg HILTI TE 7-C 3.4 kg HILTI TE 30-C 4.2kg Max Drilling dia in steel 13mm 13mm 13mm Max Drilling dia in wood 35mm 35mm 35mm Max Drilling dia in masonry 20mm 28mm 32mm Optimum Drilling dia in concrete 12mm 16mm 20mm Safety & Productivity 110 V 110 V 110 V Power 650W 710W 850W Single impact energy 1.8J 2.6J 3.3J Speed 1200 rpm 1050 rpm 750 rpm Hammering frequency (impacts/minute) Reverse switch Yes Yes N/A Chiselling function no Yes Yes HHD-SDS HHD-LCD+ HHD-LCD+ Dust Removal Systems: to suit above TE 2, TE 7-C, TE 30C TE-DRS-S For use with standard drill bits ROTARY HAMMER DRILLS SMALL DUTY MEDIUM DUTY 88 HEAVY DUTY POA TE-CD Hollow drill bit 64

4 TE 50-AVR ROTARY HAMMER DRILLS TE 60-ATC/AVR BREAKING, DRILLING & FIXING TE 70-AVR TE 80-ATC/AVR HILTI TE 50-AVR HILTI TE 60-ATC/AVR HILTI TE 70-AVR HILTI TE 80-ATC/AVR 5.8kg 7.5kg 8.3 kg 9.7kg n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 16-25mm 18-40mm 20-40mm 20-40mm Safety & Productivity: 110V 110 V 110 V 110 V 1050W 1300W 1800W 1800W 5.2J 7.3J 11.5J 11.5J 550 rpm 350 rpm 360 rpm 360 rpm No No Yes Yes Yes Yes HHD-MCD HHD-MCD HHD-HCD HHD-HCD Dust Removal Systems: to suit above TE 2, TE 7-C, TE 30C TE DRS-Y For use with standard drill bits TE-DRS-B For Chiselling TE-YD Hollow drill bit POA Telephone your nearest Hire Depot 65 65

5 LIGHT DUTY BREAKER TE 500 MEDIUM DUTY BREAKER TE Hire Depots - Nationwide - Active Vibration Reduction for low vibration, better handling and higher productivity Side handle with full radial and axial adjustment for a secure grip in virtually any position More power with less weight Optional Dust Removal System collects up to 98% of hazardous fine dust Chiselling work on concrete and masonry walls Channeling on concrete and masonry Repairing concrete, removing plaster and tiles Chiselling breaches and penetrations for pipes in walls and floors 1100w Full Ham/Freq HEAVY DUTY BREAKER TE 1000 HHD-LDB Lowest vibration values in its class thanks to Hilti s innovative sub-chassis Active Vibration Reduction (AVR) system Optional TE DRS-B dust removal system collects up to 95% of dust Inline design for easier handling in demanding breaking applications Demolishing concrete and masonry at floor level or below waist level Removing tiles, bushing and compacting Renovating floors of all kinds Corrective chiselling such as adjustments to door and window openings 1600w kg 3180 imp/min 12.5kg Single Imp. Energy 26J HHD-HDB DUST REMOVAL SYSTEM TE DRS-B Compatible with all Hilti Combi Drills excluding the TE3000. Subchassis Active Vibration Reduction (AVR) for greater working comfort Power reduction button for improved performance on brittle base materials Optional DRS-B dust removal system collects up to 95% of dust Making window and door openings Heavy wall demolition on masonry and brick Removing tiles from walls and floors Removing plaster Bushing applications for roughening surfaces 1200w Full Ham/Freq HHD-MDB BREAKER WHEEL 7.9kg 2760 imp/min Use this breaker wheel to help select the right breaker for the job! 66 66

6 PAVING BREAKER TE 3000 Trolley Medium- to heavy-duty demolition of concrete slabs and foundations Breaking up asphalt for road building, repair work and pipe laying Digging and tamping in earthwork HHD-USH w Impressive breaking performance - up to 6 tons of concrete per hour, which puts the TE 3000 on a par with compressed air tools Minimal vibration Versatile, easy to operate, easy to transport and ready for use in mins. 29.9kg Single Imp. Energy 68J A powerful high performance alternative to the bulky compressor which is small enough to be transported in most vehicles POINTS & CHISELS TURN TO PAGE 175 Engine Fuel HYDRAULIC POWER PACK POINTS & CHISELS TURN TO PAGE 175 HYDRAULIC CORE DRILLS HEAVY DUTY PETROL BREAKER HHD-PETB Recoil start 2 stroke oil-petrol mix Fuel 4 stroke petrol 103kg These powerful drills are ideal for jobs where there is no space for drill stands. Due to the *non-kick back operation, you can still drill holes up to 200mm in diameter free hand. Can be used for wet diamond drilling on the toughest jobs. No electrical components make it safe inside buildings, hazardous environments and even underwater. Heavy Duty Petrol Breaker Power on demand. This petrol breaker is both portable and lightweight, yet packs the power of a full sized hydraulic machine. Blow Energy BREAKING, DRILLING & FIXING 67 40j 25kg Breaking Capacity 300mm/12" Max Pressure 138 BAR HAND HELD HYDRAULIC DEMOLITION PICK Hand held hydraulic demolition pick is ideal for horizontal work in brick, mortar and light concrete MIN PBR-CHIP POA 12kg Hydraulic supply flow rate /min Hydraulic supply pressure range bar MIN PBR-PBCD POA 7kg Oil flow range l.p.m. (5-8 US gal/min) Oil working temperature C ( F) * Non-kick back operation eliminates pressure spikes in the hydraulic system when the bit is stalled, providing continuous smooth operation. POA PBR-PB Telephone your nearest Hire Depot 67

7 Hire Depots - Nationwide - RB 35 X ROTABROACH DRILL RB 50 X ROTABROACH DRILL HHD-BROACH Core Drill Cutting Depth 12-35mm 50mm A lightweight, metal core drilling machine with an integrated and automatic coolant supply. Comes with transport case, safety belt, guard, Allen key and drill with adaptor chuck. A metal core drilling machine which is fast, easy-to-use and ideal for boring accurate holes into steel and iron. Comes with transport case, safety belt, guard, Allen key and drill with adaptor chuck. Magnet Foot mm distance from the motor. Always attach the safety chain before use. 3.2 HHD-BROACH Core Drill Cutting Depth 12-35mm 50mm Magnet Foot 1100w 70 x 185mm 12.5kg mm distance from the motor. 1200w 92 x 220mm 15kg ELECTRIC PERCUSSION DRILL Hammer drilling in masonry and natural stone, rotary drilling in steel and sheet metal, rotary drilling and hole sawing in softwood and hard wood, various screw driving jobs. Well thought out pistol grip design and low weight for unique working comfort 2 gears plus additional hammering function for wide range of applications Stepless electronic speed control for smooth, gentle starting and screw driving NEEDLE GUN / LIGHT HAMMER HHD-0.5HD w 2.6kg Max Drill-Steel 16mm Max Drill-Wood 40mm Max Drill-Masonry 20mm Number of gear Speed 1 (no load) 900 rpm Speed 2 (no load) 2500 rpm Hammering speed (under load 100%) 48,000 impacts /minute Max torque 80Nm (soft joint) A versatile, extra-light machine for chiselling and cleaning. 91 The lightest Hilti breaker, allows effortless use in all working directions Compact design and ergonomic rubber forward grip for easy handling and freedom of movement AVR Active Vibration Reduction makes the tool less tiring to use and increases daily productivity Ruggedly built from high-grade materials and components for unbeaten, extra-long lifetime Removing paint and rust from steel (using the needle adaptor) HHD-TE w NEEDLE ATTACHMENT Blow Energy 3.3j 3.8kg HHD-NEED

8 1st FIX NAILER GX90 Also available in 2nd FIX 108 CORDLESS NAILER 2nd FIX BREAKING, DRILLING & FIXING Excellent productivity through high performance Li-Ion battery and high magazine loading capacity Best-in-class workplace safety the unique safety nosepiece greatly reduces the risk of free-flying fasteners Compatible with standard commercially-available consumables - 34 degree nail collation High working precision with high grip nose, easy setting depth adjustment (keyless) and protective cap Cordless alternative for most common wood framing applications - drives nails up to 90 mm in length Wood framing for stud walls and roofs External cladding Roof battens and counterbattens Fencing and hoarding Power supply Gas Can Power (max) 85 J Operating weight 3.7 kg Dimension (L x W x H) 384 x 134 x 381 Nail length range mm Max. Nailing rate 1200 nails per hour 3 A lightweight contractors tool for fixing skirting boards, architraves, MDF fixings, beading, secret nailings on tongue and groove boards etc. No wood bruising using this nailer. FIX-STNAIL Model Power IM250 Gas & Battery 2.3kg PNEUMATIC STAPLE GUN 101 FIX-BRAD Sale or Return option available on accessories for nail guns STAPLE GUN - ELECTRIC Fast nailing/stapling for a multitude of tasks on DIY and construction projects. 3 FIX-GUNELE Staple Lengths Nail Lengths 101 up to 30mm/1.2" up to 35mm/1.4" Paslode 1st Fix 240v 1.8kg Battery Capacity 4000 Nails Fuel Cell Capacity 850 Nails Nail Sizes 18-65mm/0.7"-2.6" Depth control ensures a perfect finish to every job. No-mark nose ensures no damage to the substrate. 3 FIX-GUNAIR Operating Pressure PSI Fastener Capacity 100 ASK IN STORE FOR NAILS - SALE ITEMS 101 CFM per cycle kg Telephone your nearest Hire Depot 69 69

9 PORTA NAILER c/w MALLET CARTRIDGE HAMMER DX460 The fast, effective way to lay standard tongue & groove floorboards. Simply position the tool and strike the plunger with the mallet supplied. Drives and countersinks in one operation. 105 Hire Depots - Nationwide Magazine Capacity 100 x 50mm/2" nails 3.4kg FIX-PORT BX3 BATTERY NAILER The Hilti BX 3 is a totally new battery - powered direct featuring tool for concrete and steel applications. Simply slide in the nails, fit the battery and switch it on. Cartridge Strips / Nails ASK IN STORE FOR CARTRIDGE STRIPS & NAILS - SALE ITEMS Sale or Return option available on accessories for nailers and cartridge hammers For fast, repetitive fastening to steel, concrete and brick surfaces. It has a large capacity nail magazine and fully controllable fire power. Also has ultra-safe contact only firing. Excellent power-to-weight ratio for attaching a wide variety of materials to concrete and steel Fully automatic High fastening rate, low overall in-place cost Great ergonomics with reduced recoil Power regulation Fastening wood to concrete, sand-lime block masonry or steel Fastening sheet metal to concrete, sand-lime block or steel Fastening formwork 2x4s using the X-CT form nail Fastening the X-FS form stop on concrete footings Attaching drainage foils and membranes to concrete or CMU block HHD-DX HHD-DXA Power supply - 10 Cart.Strip Power (max) 325 J Operating weight 3.57 kg NAILS & CARTRIDGES TURN TO PAGE 175 Dimension (L x W x H) 467 x 72 x 180 Nail length range mm Max. Nailing rate 700 nails per hour Health & Safety Heavy duty ear defenders and goggles must be worn.