MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES

Transcription

1 MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES 03/2018

2 We are where our customers are. Because we see customer proximity as an expression of our company culture.

3 GRASS SOUTH AFRICA This catalogue consists of some products not produced by GRASS, but distributed and supplied by GRASS ZA A globally successful group of companies, a fresh brand with tradition and an extraordinary diversity of perspectives - that s GRASS in a nutshell. With sales revenues of 378 million euros in the financial year 2017, over 1,900 employees at 18 locations and more than 200 distributors in 60 countries, GRASS ranks among the world s leading specialists in movement systems. For further information on GRASS products refer to our International catalogue - MOVEMENT SYSTEMS FITTINGS & ACCESSORIES CATALOGUE 2018

4

5 INDEX PAGE DWD XP DRAWER SYSTEM - WHITE 4 DWD XP DRAWER SYSTEM - GREY 5 DYNAMOOV DRAWER SYSTEM 6 INTEGRA DRAWER SYSTEM 7 KINVARO FLAP SYSTEM 8-9 NEXIS CLICK-ON HINGE NEXIS SLIDE-ON HINGE OMNI CLICK-ON HINGE SOFT CLOSE OMNI CLICK-ON HINGE OMNI SLIDE-ON HINGE 19 OMNI SLIDE SYSTEMS 20 CUTLERY INSERTS 21 ORGANISING SYSTEMS RUBBER MATTING 24 HANDLE PROFILES SIGE PULL-OUT LARDER 29 SIGE PULL-OUT SHELF 30 SIGE ROTATION CORNER 31 SIGE PULL-OUT CORNER 32 SIGE PULL-OUT BASE SIGE RECYCLING BINS SIGE WASTE BINS 37 ITALIANA FERRAMENTA ACCESSORIES 38 OMNI ACCESSORIES OMNI KNOCKDOWN FITTINGS 42-43

6 DWD XP DRAWER SYSTEM WHITE STANDARD DRAWER DRAWER TYPE DRAWER LENGTH NL CODE DWD XP H POT DRAWER DRAWER TYPE DRAWER LENGTH NL CODE DWD XP H WITH RECTANGULAR RAIL BACK BRACKET F F RECTANGULAR BACK BRACKET RAIL F F INSET DRAWER DRAWER TYPE DW D XP H95 INSET DRAWER LENGTH NL CODE INSET DRAW FRONT FIXING F F F COVER CAP FOR INSET PANEL F F F INSET PANEL F F F * 40kg + 60kg * 2D Adjustment CALCULATING YOUR OWN CUTTING LIST * Fully synchronised * Full Extension * Width of bottom and back panel is the same 68 mm ICW - 74 mm BACK ICW - 74 mm BACK 164 mm INSTALLATION POSITION 37 mm TO 4TH HOLE NL - 9 STD BASE POT BASE NL- 9 ABBREVIATION: ICW - Inside Cabinet Width NL Length of runner JIG ICW - 74 mm DRILLING JIG FOR CABINET MEMBER F ICW - 74 mm DWD DRAWER FRONT MARKING JIG F add FOR MORE ACCESSORIES, REFER TO PAGE 19 & MM WHITE CUTLERY TRAY PILOT DRILL BIT 3.5 MM F

7 DWD XP DRAWER SYSTEM GREY STANDARD DRAWER DRAWER TYPE DRAWER LENGTH NL CODE DWD XP H POT DRAWER DRAWER TYPE DRAWER LENGTH NL CODE DWD XP H95 WITH ROUND RAIL DWD XP H95 WITH RECTANGLE RAIL BACK BRACKET F F F F F RAIL F F F F F INSET DRAWER DRAWER TYPE DWD XP H95 INSET DRAWER LENGTH NL CODE FRONT FIXING F F F COVER CAP FOR INSET PANEL F F F INSET PANEL F F F * 40kg + 60kg * 2D Adjustment CALCULATING YOUR OWN CUTTING LIST * Fully synchronised * Full Extension * Width of bottom and back panel is the same 68 mm ICW - 74 mm BACK ICW - 74 mm BACK 164 mm INSTALLATION POSITION 37 mm TO 4TH HOLE NL - 9 STD BASE POT BASE NL- 9 ABBREVIATION: ICW - Inside Cabinet Width NL Length of runner JIG ICW - 74 mm DRILLING JIG FOR CABINET MEMBER F ICW - 74 mm add DWD DRAWER FRONT MARKING JIG F FOR MORE ACCESSORIES, REFER TO PAGE 19 & MM WHITE CUTLERY TRAY PILOT DRILL BIT 3.5 MM F

8 DYNAMOOV DRAWER SYSTEM DRAWER TYPE DRAWER LENGTH NL CODE LOCKING DEVICE 270 F F F F F F DYNAMOOV SOFT-CLOSE 400 F F F F F F F F DRAWER TYPE DR AWER LENGTH NL DYNAMOOV TIPMATIC CODE F F F F F F LOCKING DEVICE F F F F F F * 30kg * 1D Adjustment * Fully synchronised * Toolless adjustment * Full Extension CALCULATING YOUR OWN CUTTING LIST ICW - 42 mm NL -10 mm INSTALLATION POSITION 37 mm TO 4TH HOLE ICW NL +3 mm ABBREVIATION: ICW - Inside Cabinet Width NL Length of runner add FOR MORE ACCESSORIES, REFER TO PAGE 19 & MM WHITE CUTLERY TRAY JIG DRILLING JIG FOR CABINET MEMBER F DRILLING JIG FOR BACK HOLE OF DRAWER F PILOT DRILL BIT 3.5 MM F

9 INTEGRA DRAWER SYSTEM WHITE 53 MM DRAWER DRAWER TYPE INTEGRA H-53 DRAWER LENGTH NL CODE F F LEFT BRACKET F F RIGHT BRACKET F F COVER CAP 85 MM DRAWER DRAWER TYPE DRAWER LENGTH NL CODE F F LEFT BRACKET F F RIGHT BRACKET F F COVER CAP F F INTEGRA H F F F F F F F F F F F F F F F F MM DRAWER DRAWER TYPE DRAWER LENGTH NL CODE LEFT BRACKET RIGHT BRACKET COVER CAP INTEGRA H F F F F F F F F RAIL SETS TYPE SIZE CODE INTEGRA POT RAIL SET INTEGRA FILING RAIL 500 F * 30kg * 2D Adjustment CALCULATING YOUR OWN CUTTING LIST 53/70 mm IWC - 31 mm BACK ICW - 31 mm BACK 131 mm KV INSTALLATION POSITION Ø 6.3 Ø LOR-5 STD BASE ICW - 31 mm ABBREVIATION: ICW - Inside Cabinet Width NL Length of runner JIG DRILLING JIG FOR CABINET MEMBER F POT BASE ICW - 31 mm LOR-5 add INTEGRA DRAWER FRONT MARKING JIG F FOR MORE ACCESSORIES, REFER TO PAGE 19 & MM WHITE CUTLERY TRAY PILOT DRILL BIT 3.5 MM F

10 KINVARO FLAP SYSTEM FLAP TYPE MIN HEIGHT MAX HEIGHT RANGE OF FLAP CODE *KINVARO T Width: Up to 1200 mm F *KINVARO T Width: Up to 1200 mm F *KINVARO T Width: Up to 1200 mm F FLAP TYPE MIN HEIGHT MAX HEIGHT RANGE OF FLAP CODE KINVARO F Width: 450 mm-1200 mm TYPE 4B Weight: 4.1 kg kg F TYPE 4C Weight: 6.8 kg kg F TYPE 5B Weight: 3.8 kg kg F TYPE 6C Weight: 6.5 kg kg F TYPE 6D Weight: 10.0 kg kg F TYPE 7C Weight: 6.0 kg kg F TYPE 7D Weight: 8.6 kg kg F FLAP TYPE MIN HEIGHT MAX HEIGHT RANGE OF FLAP CODE KINVARO S Width: 450 mm-1200 mm SPRING A Weight: 1.5 kg kg F SPRING B Weight: 5.0 kg kg F SPRING C Weight: 4.0 kg kg F SPRING D Weight: 6.5 kg kg F FLAP TYPE MIN HEIGHT MAX HEIGHT RANGE OF FLAP CODE KINVARO L Width: 450 mm-1200 mm TYPE 1A Weight: 2.5 kg kg F TYPE 2A Weight: 2.3 kg kg F TYPE 3A Weight: 2.1 kg kg F TYPE 5B Weight: 4.0 kg kg F TYPE 5C Weight: 7.0 kg kg F HOW TO CALCULATE YOUR DOOR WEIGHT: FLAP WIDTH X FLAP HEIGHT X FLAP THICKNESS X DENSITY + HANDLE = WEIGHT OF FLAP DENSITIES: MDF 0.85KG, CHIPBOARD 0.65KG, PINE 0.45KG FOR BAR HANDLES, ALLOW 0.1KG FOR EACH 100 MM HANDLE WIDTH LIFTS COME WITH ADJUSTABLE DAMPING/ SOFT-CLOSE SYSTEM WE RECOMMEND A TRIAL FIT BEFORE FINAL INSTALLATION 8

11 KINVARO FLAP SYSTEM FLAP TYPE MIN HEIGHT MAX HEIGHT MAX WEIGHT CODE KINVARO D-S WHITE 40N KINVARO D-S NIGHT 40N KINVARO D-S WHITE 60N kg 3 kg 6 kg F F F KINVARO D-S NIGHT 60N KINVARO D-M WHITE 100N KINVARO D-M NIGHT 100N kg 10 kg 10 kg F F WH F BLK DESCRIPTION TIOMOS FLAP HINGE NICKEL TIOMOS FLAP HINGE NIGHT APPLICATION OVERLAY 90 CODE PACK SIZE F EACH OVERLAY 90 F EACH DRILLING PATTERNS Front Cabinet CUP DIMENSIONS min min Modern design 90 opening angle For flap thicknesses of up to 21 mm Narrow gaps between door and cabinet Large overlay of up to 19 mm 12 mm cup depth 3 - dimensional adjustment Very suitable for combining with the Kinvaro D flap stays 9

12 TIOMOS HIDDEN HINGE SYSTEM The new era for furniture doors. Hinge comfort becomes virtually invisible. Intelligent. Elegant. Hidden. Discreet shape. Clever functionality. With a 105-degree opening angle, the slender Tiomos Hidden hinge can be optimally incorporated into doors with a thickness of just 18 mm or above. Premiere for Tiomos Hidden the perfectly integrated hinge inside the cabinet. With Tiomos Hidden, GRASS presents a hinge system that is entirely milled into the cabinet. Slender in design, this hinge plays to its multifaceted functional strengths behind the scenes. Amongst others, these include the perfectly integrated comfort system for gentle closing. In the colour option Night, Tiomos Hidden also impresses in combination with the latest design trends favouring dark surface finishes.

13 NEXIS CLICK-ON HINGE NEXIS HINGE CLICK-ON SCREW-IN FULL OVERLAY 100 F NEXIS HINGE CLICK-ON DOWEL FULL OVERLAY 100 F Door thickness up to 24 mm Cup depth 11mm Clip on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate NEXIS HINGE CLICK-ON SCREW-IN HALF OVERLAY 100 F NEXIS HINGE CLICK-ON DOWEL HALF OVERLAY 100 F Door thickness up to 24 mm Cup depth 11mm Clip on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate NEXIS HINGE CLICK-ON SCREW-IN INSET 100 F NEXIS HINGE CLICK-ON DOWEL INSET 100 F Door thickness up to 24 mm Cup depth 11mm Clip on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate NEXIS HINGE CLICK-ON SCREW-IN INSET 45 CORNER F NEXIS HINGE CLICK-ON DOWEL INSET 45 CORNER F Door thickness up to 30 mm Cup depth 11.8 mm Clip on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate 95 Opening angle NEXIS HINGE CLICK-ON SCREW-IN INSET 83 MM POST/BLIND CORNER F NEXIS HINGE CLICK-ON DOWEL INSET 83 MM POST/BLIND CORNER F Door thickness up to 30 mm Cup depth 11.8 mm Clip on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate 95 Opening angle 11

14 NEXIS CLICK-ON HINGE DESCRIPTION APPLICATION CODE NEXIS HINGE CLICK-ON SCREW-IN FULL OVERLAY 170 F NEXIS HINGE CLICK-ON DOWEL FULL OVERLAY 170 F PACK SIZE Door thickness up to 26 mm Cup depth 11mm Clip on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate Zero Protusion hinge at 90 opening angle DESCRIPTION APPLICATION CODE PACK SIZE NEXIS CLICK-ON CROSS M/PLATE SCREW FIX 2 MM F DESCRIPTION APPLICATION CODE PACK SIZE NEXIS CLICK-ON CROSS M/PLATE MOUNTED EURO SCREW 2 MM F DESCRIPTION APPLICATION CODE PACK SIZE NEXIS HINGE SOFT-CLOSE ADAPTER F KPUSH TECH WITH BUFFER STRONG AB 70 MM WHITE MOUNTING PLATE WITH HOUSING MM WHITE KPUSH TECH WITH BUFFER STRONG EE 70 MM GRAPHITE MOUNTING PLATE WITH HOUSING G 80 MM GRAPHITE 12

15 NEXIS SLIDE-ON HINGE DESCRIPTION APPLICATION CODE PACK SIZE NEXIS HINGE SLIDE-ON SCREW-IN FULL OVERLAY 100 F NEXIS HINGE SLIDE-ON DOWEL FULL OVERLAY 100 F Door thickness up to 24 mm Cup depth 11 mm Slide on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate DESCRIPTION NEXIS HINGE SLIDE-ON SCREW-IN NEXIS HINGE SLIDE-ON DOWEL APPLICATION CODE PACK SIZE HALF OVERLAY 100 F HALF OVERLAY 100 F Door thickness up to 24 mm Cup depth 11 mm Slide on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate DESCRIPTION NEXIS HINGE SLIDE-ON SCREW-IN NEXIS HINGE SLIDE-ON DOWEL APPLICATION CODE PACK SIZE INSET 100 F INSET 100 F Door thickness up to 24 mm Cup depth 11 mm Slide on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate DESCRIPTION NEXIS HINGE SLIDE-ON SCREW-IN NEXIS HINGE SLIDE-ON DOWEL APPLICATION CODE PACK SIZE INSET 45 CORNER F INSET 45 CORNER Door thickness up to 30 mm Cup depth 11.8 mm Slide on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate 95 Opening Angle DESCRIPTION NEXIS HINGE SLIDE-ON SCREW-IN NEXIS HINGE SLIDE-ON DOWEL APPLICATION CODE PACK SIZE 63 MM INSET/BLIND-CORNER F MM INSET/BLIND-CORNER Door thickness up to 30 mm Cup depth 11.8 mm Slide on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate 95 Opening Angle 13

16 NEXIS SLIDE-ON HINGE DESCRIPTION NEXIS HINGE SLIDE-ON SCREW-IN NEXIS HINGE SLIDE-ON DOWEL APPLICATION CODE PACK SIZE FULL OVERLAY 170 F FULL OVERLAY 170 F Door thickness up to 26 mm Cup depth 11 mm Slide on with various plate options Soft-close compatible 3-Dimentional adjustment with appropriate plate Zero Protrusion hinge at 90 opening DESCRIPTION APPLICATION CODE PACK SIZE NEXIS SLIDE-ON M/PLATE SCREW FIX - 0 MM F DESCRIPTION APPLICATION CODE PACK SIZE NEXIS SLIDE-ON M/PLATE MOUNTED EURO SCREW - 0 MM F DESCRIPTION APPLICATION CODE PACK SIZE NEXIS HINGE SOFT-CLOSE ADAPTER F KPUSH TECH WITH BUFFER STRONG AB 70 MM WHITE MOUNTING PLATE WITH HOUSING MM WHITE KPUSH TECH WITH BUFFER STRONG EE 70 MM GRAPHITE MOUNTING PLATE WITH HOUSING G 80 MM GRAPHITE 14

17 OMNI CLICK-ON HINGE SOFT CLOSE OMNI HINGE CLICK-ON SCREW-IN FULL OVERLAY SOFT-CLOSE 110 A36A OMNI HINGE CLICK-ON DOWEL FULL OVERLAY SOFT-CLOSE 110 A36A07N 200 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW-IN HALF OVERLAY SOFT-CLOSE 110 A36A OMNI HINGE CLICK-ON DOWEL HALF OVERLAY SOFT-CLOSE 110 A36A03N 200 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW-IN INSET SOFT-CLOSE 110 A36A OMNI HINGE CLICK-ON DOWEL INSET SOFT-CLOSE 110 A36A01N 200 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW-IN INSET SOFT-CLOSE 45 AC12T OMNI HINGE CLICK-ON DOWEL INSET SOFT-CLOSE 45 AC12T02N 100 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW-IN INSET POST HINGE SOFT-CLOSE 110 A OMNI HINGE CLICK-ON DOWEL INSET POST HINGE SOFT-CLOSE 110 A1203N 100 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options 15

18 OMNI OMNI CLICK-ON HINGE SOFT CLOSE OMNI HINGE CLICK-ON SCREW-IN FULL OVERLAY SOFT-CLOSE 165 AC OMNI HINGE CLICK-ON DOWEL FULL OVERLAY SOFT-CLOSE 165 AC2016N 100 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI M/PLATE CLICK-ON SCREW FIX C31H0-4 HOLE 500 OMNI M/PLATE CLICK-ON SCREW FIX - 0 MM C31H0 500 OMNI M/PLATE CLICK-ON 10 MM MOUNTED EURO SCREW - 0 MM C31H0D OMNI M/PLATE CLICK-ON 13 MM MOUNTED EURO SCREW - 0 MM C31H0D OMNI M/PLATE CLICK-ON SCREW FIX - ID C31CAMHON

19 OMNI OMNI CLICK-ON HINGE OMNI HINGE CLICK-ON SCREW IN FULL OVERLAY 110 C OMNI HINGE CLICK-ON DOWEL FULL OVERLAY 110 C0406N 250 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW IN HALF OVERLAY 110 C OMNI HINGE CLICK-ON DOWEL HALF OVERLAY 110 C0403N 250 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW IN INSET 110 C OMNI HINGE CLICK-ON DOWEL INSET 110 C0401N 250 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW IN INSET 45 CORNER C12T OMNI HINGE CLICK-ON DOWEL INSET 45 CORNER C12T02N 100 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW IN INSET/BLIND CORNER HINGE C12T OMNI HINGE CLICK-ON DOWEL INSET/BLIND CORNER HINGE C12T03N 100 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options 17

20 OMNI OMNI CLICK-ON HINGE OMNI HINGE CLICK-ON SCREW IN BI-FOLD/PIE-CUT FULL HOLE C12T OMNI HINGE CLICK-ON DOWEL BI-FOLD/PIE-CUT FULL HOLE C12T04N 100 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI HINGE CLICK-ON SCREW IN FULL OVERLAY 165 C OMNI HINGE CLICK-ON DOWEL FULL OVERLAY 165 C2016N 100 Door thickness up to 16 mm Cup depth 11.3 mm Clip on with various plate options OMNI M/PLATE CLICK-ON SCREW FIX C02H0 500 DESCRIPTION APPLICATION CODE PACK SIZE OMNI M/PLATE CLICK-ON SCREW FIX C02H04HOLE 500 DESCRIPTION APPLICATION CODE PACK SIZE OMNI M/PLATE CLICK-ON 10 MM MOUNTED EURO SCREW C02H0D OMNI M/PLATE CLICK-ON 13 MM MOUNTED EURO SCREW C02H0D

21 OMNI OMNI SLIDE-ON HINGE OMNI HINGE AND PLATE SLIDE-ON SCREW IN FULL OVERLAY C PREPACK OMNI HINGE SLIDE-ON SCREW IN FULL OVERLAY C OMNI HINGE SLIDE-ON DOWEL FULL OVERLAY C N 200 OMNI M/PLATE SLIDE-ON 4 HOLE SCREW-IN C01H04HOLE 200 OMNI M/PLATE SLIDE-ON 2 HOLE MOUNTED EURO SCREW C01H0D Pre-packed OMNI HINGE AND PLATE SLIDE-ON SCREW IN FULL OVERLAY C PREPACK OMNI HINGE SLIDE-ON SCREW IN FULL OVERLAY C OMNI HINGE SLIDE-ON DOWEL FULL OVERLAY C N 200 OMNI M/PLATE SLIDE-ON 4 HOLE SCREW-IN C01H04HOLE 200 OMNI M/PLATE SLIDE-ON 2 HOLE MOUNTED EURO SCREW C01H0D Pre-packed OMNI FACE FRAME HINGE + PLATE SCREW-IN HALF OVERLAY C Face Frame Application 19

22 OMNI SLIDE SYSTEMS CODE DESCRIPTION SIZE SET FINISH X270W OMNI SUPER STEEL DRAWER SLIDE 86 X WHITE X350W OMNI SUPER STEEL DRAWER SLIDE 86 X WHITE X400W OMNI SUPER STEEL DRAWER SLIDE 86 X WHITE X450W OMNI SUPER STEEL DRAWER SLIDE 86 X WHITE X500W OMNI SUPER STEEL DRAWER SLIDE 86 X WHITE X450W OMNI SUPER STEEL DRAWER SLIDE 150 X WHITE X500W OMNI SUPER STEEL DRAWER SLIDE 150 X WHITE 5501 MARKING JIG FOR DRAWER FRONTS 1 BLACK CODE DESCRIPTION SET FINISH SOFT-CLOSE ADAPTER FOR SINGLE WALL STEELDRAWERS 1 GREY SOFT-CLOSE PIN/STRIKER FOR SINGLE WALL STEEL DRAWER 1 WHITE SOFT-CLOSE PIN/STRIKER FOR WOODEN DRAWER 1 GREY CODE DESCRIPTION SIZE SET FINISH MBBF/250 OMNI BALL BEARING FULL EXTENSION 45 KG 250 MM 10 ZINC MBBF/300 OMNI BALL BEARING FULL EXTENSION 45 KG 300 MM 10 ZINC MBBF/350 OMNI BALL BEARING FULL EXTENSION 45 KG 350 MM 10 ZINC MBBF/400 OMNI BALL BEARING FULL EXTENSION 45 KG 400 MM 10 ZINC MBBF/450 OMNI BALL BEARING FULL EXTENSION 45 KG 450 MM 10 ZINC MBBF/500 OMNI BALL BEARING FULL EXTENSION 45 KG 500 MM 10 ZINC MBBF/550 OMNI BALL BEARING FULL EXTENSION 45 KG 550 MM 10 ZINC MBBF/600 OMNI BALL BEARING FULL EXTENSION 45 KG 600 MM 10 ZINC CODE DESCRIPTION SIZE SET FINISH MBBF/350SC OMNI BALL BEARING FULL EXTENSION SOFT CLOSE 45 KG 350 MM 10 ZINC MBBF/400SC OMNI BALL BEARING FULL EXTENSION SOFT CLOSE 45 KG 400 MM 10 ZINC MBBF/450SC OMNI BALL BEARING FULL EXTENSION SOFT CLOSE 45 KG 450 MM 10 ZINC MBBF/500SC OMNI BALL BEARING FULL EXTENSION SOFT CLOSE 45 KG 500 MM 10 ZINC MBBF/550SC OMNI BALL BEARING FULL EXTENSION SOFT CLOSE 45 KG 550 MM 10 ZINC 20

23 CUTLERY INSERTS W x D NOVA PRO 450 MM CUTLERY INSERT CNP450/500WH 360X480 WHITE VIONARO 450 MM CUTLERY INSERT CVI450/500WH 375X473 WHITE DWD XP 450 MM CUTLERY INSERT CXP450/500WH 356X473 WHITE INTEGRA 450 MM CUTLERY INSERT CIN450/500WH 387X480 WHITE NOVA PRO 450 MM CUTLERY INSERT CNP450/500SIL 360X480 SILVER VIONARO 450 MM CUTLERY INSERT CVI450/500SIL 375X473 SILVER DWD XP 450 MM CUTLERY INSERT CXP450/500SIL 356X473 SILVER NOVA PRO 450 MM CUTLERY INSERT CNP450/500GRP 360X480 GRAPHITE VIONARO 450 MM CUTLERY INSERT CVI450/500GRP 375X473 GRAPHITE W x D NOVA PRO 600 MM CUTLERY INSERT CNP600/500WH 510X480 WHITE VIONARO 600 MM CUTLERY INSERT CVI600/500WH 525X473 WHITE DWD XP 600 MM CUTLERY INSERT CXP600/500WH 506X473 WHITE INTEGRA 600 MM CUTLERY INSERT CIN600/500WH 537X480 WHITE NOVA PRO 600 MM CUTLERY INSERT CNP600/500SIL 510X480 SILVER VIONARO 600 MM CUTLERY INSERT CVI600/500SIL 525X473 SILVER DWD XP 600 MM CUTLERY INSERT CXP600/500SIL 506X473 SILVER NOVA PRO 600 MM CUTLERY INSERT CNP600/500GRP 510X480 GRAPHITE VIONARO 600 MM CUTLERY INSERT CVI600/500GRP 525X473 GRAPHITE DESCRIPTION CODE SIZE FIN ISH W x D NOVA PRO 900 MM CUTLERY INSERT CNP900/500WH 810X480 WHITE VIONARO 900 MM CUTLERY INSERT CVI900/500WH 825X473 WHITE DWD XP 900 MM CUTLERY INSERT CXP900/500WH 806X473 WHITE NOVA PRO 900 MM CUTLERY INSERT CNP900/500SIL 810X480 SILVER VIONARO 900 MM CUTLERY INSERT CVI900/500SIL 825X473 SILVER DWD XP 900 MM CUTLERY INSERT CXP900/500SIL 806X473 SILVER NOVA PRO 900 MM CUTLERY INSERT CNP900/500GRP 810X480 GRAPHITE VIONARO 900 MM CUTLERY INSERT CVI900/500GRP 825X473 GRAPHITE CLASSICO KNIFE INSERT CLASSICO KNIFE INSERT CLASSICO KNIFE INSERT DESCRIPTION CODE SIZE FINISH CKNIFE/WH CKNIFE/GRP CKNIFE/SIL W x D 165X X X440 WHITE GRAPHITE SILVER CLASSICO SPICE INSERT CLASSICO SPICE INSERT CLASSICO SPICE INSERT DESCRIPTION CODE SIZE FINISH W x D CSPICE/WH CSPICE/GRP CSPICE/SIL 165X X X440 WHITE GRAPHITE SILVER 21

24 ORGANISING SYSTEMS W x D TAVINEA SORTO B276 NOVAPRO F X 500 STONE TAVINEA SORTO B276 NOVAPRO F X 500 SILVER TAVINEA SORTO B276 VIONARO AND DWD XP F X 500 GRAPHITE W x D TAVINEA SORTO B186 NOVAPRO F X 500 STONE TAVINEA SORTO B186 NOVAPRO F X 500 SILVER TAVINEA SORTO B186 VIONARO AND DWD XP F X 500 GRAPHITE TAVINEA SORTO DIVIDER RAIL NOVAPRO F STONE TAVINEA SORTO DIVIDER RAIL NOVAPRO F SILVER TAVINEA SORTO DIVIDER RAIL VIONARO AND DWD XP F GRAPHITE W x D TAVINEA SORTO KNIFE BLOCK NOVAPRO F X 500 DARK ASH TAVINEA SORTO KNIFE BLOCK VIONARO AND DWD XP F X 500 DARK ASH W x D TAVINEA SORTO KNIFE BLOCK NOVAPRO F X 500 LIGHT ASH TAVINEA SORTO KNIFE BLOCK VIONARO AND DWD XP F X 500 LIGHT ASH 22

25 ORGANISING SYSTEMS W x D TAVINEA SORTO SPICE RACK NOVAPRO F X 500 DARK ASH TAVINEA SORTO SPICE RACK VIONARO AND DWD XP F X 500 DARK ASH W x D TAVINEA SORTO SPICE RACK NOVAPRO F X 500 LIGHT ASH TAVINEA SORTO SPICE RACK VIONARO AND XP F X 500 LIGHT ASH W x D TAVINEA SORTO FOIL HOLDER NOVAPRO F X 500 DARK ASH TAVINEA SORTO FOIL HOLDER VIONARO AND DWD XP F X 500 DARK ASH W x D TAVINEA SORTO FOIL HOLDER NOVAPRO F X 500 LIGHT ASH TAVINEA SORTO FOIL HOLDER VIONARO AND DWD XP F X 500 LIGHT ASH W x D MAGIC SORTO SET S/STEEL & GREY F X 500 S/STEEL MAGIC SORTO SET S/STEEL & GREY F X 500 S/STEEL MAGIC SORTO SET S/STEEL & WHITE F X 500 S/STEEL MAGIC SORTO SET S/STEEL & WHITE F X 500 S/STEEL 23

26 RUBBER MATTING RUBBER MAT GREY V/MAT M x 600 MM GREY RUBBER MAT GRAPHITE V/MAT 600 GR 30 M x 600 MM GRAPHITE RUBBER CANVAS MAT CMAT/GR 25 M X 480 MM GREY RUBBER CANVAS MAT CMAT/GRP 25 M X 480 MM GRAPHITE RUBBER MAT SOLID CMAT/WH 25 M X 530 MM WHITE 24

27 OMNI HANDLE PROFILES GOLA HANDLE SLIM C SNA211CS 49 MM X 3M ALU GOLA HANDLE SLIM L SNA211LS 40 MM X 3M ALU FIXING BRACKET SLIM SNA/F - STEEL END CAP C SLIM S ALU END CAP L SLIM S ALU Allows for more height spacing inside the drawers Square cut out Makes vertical applications possible End caps available for both options Powder coating in other colours available on request More accurate cutting for mitre joints Straight edge profile gives more elegent look STANDARD: ALU ON REQUEST: WHT GRY BLK * Min 10 lengths * Lead time 7-10 days GOLA HANDLE C NA211CS 65 MM X 3 M ALU GOLA HANDLE L NA211LS 50 MM X 3 M ALU FIXING BRACKET NA/F - STEEL END CAP C ALU END CAP L RIGHT ALU END CAP L LEFT ALU Round cut out End caps available for both options Powder coating in other colours available on request STANDARD: ALU ON REQUEST: WHT GRY BLK * Min 10 lengths * Lead time 7-10 days 25

28 VOGUE HANDLE PROFILES DESCRIPTION CODE SIZE FINISH STRIP HANDLE 32 MM VD5_ALU 3 M ALU STRIP HANDLE 32 MM VD5_SS 3 M S/STEEL Suitable for cabinet doors and drawer fronts. Vertical mounting for all doors. Can be cut to size. Can be powder coated. Black & Alu available in pre-cut sizes of 100 mm, 200 mm and 300 mm. STANDARD: ALU SS ON REQUEST: WHT GRY GRP BLK DESCRIPTION CODE SIZE FINISH STRIP HANDLE 38 MM VD6_ALU 3 M ALU Suitable for cabinet doors and drawer fronts. Vertical mounting for all doors. Can be cut to size. Can be powder coated. Black & Alu available in pre-cut sizes of 100 mm, 200 mm and 300 mm. STANDARD: ALU ON REQUEST: WHT GRY GRP BLK 26

29 VOGUE HANDLE PROFILES FINGER GRIP HANDLE SHORT ALUMINIUM VD9_ALU 3 M ALU FINGER GRIP HANDLE SHORT BLACK VD9_BLK 3 M BLACK Cabinet Doors and Drawer Fronts Top or bottom mounted to doors and drawer fronts Can be used in conjunction with VD10 STANDARD: ALU BLK ON REQUEST: WHT GRY GRP FINGER GRIP HANDLE LONG ALUMINIUM VD10_ALU 3 M ALU FINGER GRIP HANDLE LONG BLACK VD10_BLK 3 M BLACK Cabinet Doors and Drawer Fronts Top or bottom mounted to doors and drawer fronts Can be used in conjunction with VD9 STANDARD: ALU BLK ON REQUEST: WHT GRY GRP 27

30 TAVINEA ORGANISING SYSTEM

31 SIGE LARDER PULL OUT DESCRIPTION CODE 300/1800 FRAME FULL EXTENSION SLIDE SOFT-CLOSE 5 BASKETS SIZE FINISH PULL OUT PANTRY SOLID BASE PULL OUT 295A 295K 295O MM CHROME SOLID BASE PULL OUT 295 GRAPHITE 295 GRAPHITE 295O 296+GREY 300MM GRAPHITE Soft-close (Optional) Weight capacity - 80 kg Solid base baskets Available in Chrome and Graphite

32 SIGE PULL OUT SHELF DESCRIPTION CODE NOVA PRO RUNNER SIZE FINISH SOLID BASE PULL OUT 119+GRASS 450 F MM CHROME SOLID BASE PULL OUT 119+GRASS 600 F MM CHROME SOLID BASE PULL OUT DESCRIPTION 119+GRASS 900 CODE F NOVA PRO RUNNER 900 MM SIZE CHROME FINISH SOLID BASE PULL OUT SOLID BASE PULL OUT SOLID BASE PULL OUT 119+GRASS 450 GR 119+GRASS 600 GR 119+GRASS 900 GR F F F MM 600 MM 900 MM GRAPHITE GRAPHITE GRAPHITE Soft-close Weight capacity - 40 kg Full extension drawer slide Fully synchronised Solid base Available in Chrome and Graphite

33 SIGE ROTATION CORNER SIGE 3/4 CAROUSEL FLAT WIRE MM CHROME SIGE 3/4 CAROUSEL FLAT WIRE 363+ GRAPHITE 800 MM GRAPHITE SIGE 3/4 CAROUSEL ROUND WIRE 363I 700 MM CHROME Retrofit Shelf mounted Weight capacity 40 kg per shelf

34 SIGE PULL OUT CORNER DESCRIPTION CODE SIZE MAX DOOR SIZE FINISH SIGE BLIND CORNER LEFT LH 900 MM 450 MM CHROME SIGE BLIND CORNER RIGHT RH 900 MM 450 MM CHROME SIGE BLIND CORNER SIGE BLIND CORNER 371+LH GRAPHITE 371+RH GRAPHITE 900 MM 900 MM 450 MM 450 MM GRAPHITE GRAPHITE SIGE BLIND CORNER SOFT-CLOSE SIGE BLIND CORNER SOFT-CLOSE 371WH 371GRP WHITE GRAPHITE Retrofit Shelf mounted Weight capacity 25 kg per shelf More stability Easy to install Soft-close (Optional)

35 SIGE PULL OUT BASE DESCRIPTION CODE NOVA PRO RUNNER SIZE FINISH SOLID BASE PULL OUT 002+GRASS F l X MM CHROME SOLID BASE PULL OUT 002+GRAPHITE F l X MM GRAPHITE BOTTLE RACK DIVIDER KIT MM CHROME Soft-close Weight capacity - 40 kg Full extension drawer slide Fully synchronised Solid base Available in Chrome and Graphite

36 SIGE PULL OUT BASE DESCRIPTION CODE NOVA PRO RUNNER SIZE FINISH SOLID BASE PULL OUT 004+GRASS F MM CHROME SOLID BASE PULL OUT 004+GREY F MM GRAPHITE BOTTLE RACK DIVIDER KIT MM CHROME BOTTLE RACK DIVIDER KIT GREY 300 MM GRAPHITE Soft-close or Push to open Weight capacity - 40 kg Full extension drawer slide Fully synchronised Solid base Available in Chrome and Graphite

37 SIGE RECYCLING BINS DESCRIPTION CODE SIZE CAPACITY NOVA PRO RUNNER PULL OUT RECYCLING BIN 574 F MM 35 LITRES PULL OUT RECYCLING BIN 570 F MM 70 LITRES Soft-close or Push to open Weight capacity - 40 kg Full extension drawer slide Fully synchronised Concealed runner Fixed shelf Height 560 DESCRIPTION CODE SIZE CAPACITY NOVA PRO RUNNER PULL OUT RECYCLING BIN 571 F MM 70 LITRES PULL OUT RECYCLING BIN 572 F MM 70 LITRES Soft-close or Push to open Weight capacity - 40 kg Full extension drawer slide Fully synchronised Concealed runner Fixed shelf Height 560 DESCRIPTION CODE SIZE CAPACITY NOVA PRO RUNNER PULL OUT RECYCLING BIN 573 F MM 85 LITRES Soft-close or Push to open Weight capacity - 40 kg Full extension drawer slide Fully synchronised Concealed runner Fixed shelf Height

38 SIGE RECYCLING BINS DESCRIPTION CODE SIZE CAPACITY NOVA PRO RUNNER PULL OUT WASTE BIN UNDER SINK 575 F MM 36 LITRES Soft-close Weight capacity - 40 kg Full extension drawer slide mm Fully synchronised Concealed runner Fixed shelf Height 360 mm Bin depth 450 mm DESCRIPTION CODE SIZE CAPACITY AUTO OPEN BIN BASE MOUNT MM 32 LITRES DESCRIPTION CODE SIZE CAPACITY PULL OUT WASTE BIN BASE MOUNT MM 21 LITRES

39 SIGE WASTE BINS DESCRIPTION CODE SIZE CAPACITY HANGING BIN MM 5 LITRES DESCRIPTION CODE SIZE CAPACITY COUNTER TOP BIN IRCOO5PP 300 MM 8 LITRE W D H WASTE BIN 45L + LID H X 330 X 660 GREY BIN BRACKET FOR 45L BIN B/BIN BRACKET WHITE FLAP STAY CHROME

40 ITALIANA FERRAMENTA ACCESSORIES KPUSH TECH WITH BUFFER STRONG AB 70 MM WHITE MOUNTING PLATE WITH HOUSING MM WHITE KPUSH TECH WITH BUFFER STRONG EE 70 MM GRAPHITE MOUNTING PLATE WITH HOUSING G 80 MM GRAPHITE KPUSH TECH WITH BUFFER NORMAL AB 70 MM WHITE MOUNTING PLATE WITH HOUSING MM WHITE KPUSH TECH WITH BUFFER NORMAL EE 70 MM GRAPHITE MOUNTING PLATE WITH HOUSING G 80 MM GRAPHITE KPUSH TECH WITH MAGNET + SCREW MM WHITE MOUNTING PLATE WITH HOUSING MM WHITE KPUSH TECH WITH MAGNET + SCREW G 70 MM GRAPHITE MOUNTING PLATE WITH HOUSING G 80 MM GRAPHITE TRIADE WOOD SHELF SUPPORT MM METAL TRIADE BRACKET ZN 65 MM S/STEEL KRABY DROP DOWN STAY L MM METAL KRABY DROP DOWN STAY L MM METAL Width: Max 1200 mm Height: mm

41 OMNI ACCESSORIES RECESSING DOOR SYS HEAVY DUTY+HINGES+BAR KV8092/ MM BLACK RECESSING DOOR SYS HEAVY DUTY+HINGES+BAR KV8092/ MM BLACK Height up to 2000 mm Door thickness up to 22 mm Gear system No Sagging of doors Up to a maximum weight capacity of 35 Kg per door Inset or overlay of 6 mm application only WARDROBE LIFT 20KG W/SUPER LIFT MM GREY SHOE P/OUT 600CR & RUNNER B/SHOE P/O 600R 568 X 500 X 160 CHROME SHOE P/OUT 900CR & RUNNER B/SHOE P/O 900R 868 X 500 X 160 CHROME COAT RAIL OVAL B/RAIL 15 X 30 X 3000 CHROME ROD HOLDER B/ROD HOLDER 15 X 30 CHROME CENTRE SUPPORT B/HOLDER SUPPORT 15 X 30 CHROME OVAL RAIL B/RAIL ALU 19 X 34 X 3000 ALU HANG RAIL BRACKET T128W 20 X 35 WHITE

42 OMNI ACCESSORIES CHROME WIRE BASKET V/B400C 400 MM CARCASS CHROME CHROME WIRE BASKET V/B450C 450 MM CARCASS CHROME CHROME WIRE BASKET V/B500C 500 MM CARCASS CHROME CHROME WIRE BASKET V/B600C 600 MM CARCASS CHROME CURVED WINE BOTTLE RACK WR240D 400 MM CHROME CURVED WINE BOTTLE RACK WR250D 500 MM CHROME CURVED WINE BOTTLE RACK WR260D 600 MM CHROME VOLPATO LEG C/LEG 100P 100 MM BLACK VOLPATO LEG C/LEG 150P 150 MM BLACK SKIRTING CLIP C/CLIP/P BLACK OMNI LEG C/LEG 100+CLIP 100 MM BLACK OMNI LEG C/LEG 150+CLIP 150 MM BLACK

43 OMNI ACCESSORIES STICK ON DOOR BUMPER F MM CLEAR STICK ON DOOR BUMPER F MM CLEAR DOOR BUMPER DRILL IN MM CLEAR FLAP DOWN STAY MZ MM CHROME GAS SPRING 80 N - WOOD DOOR MZ MM GREY GAS SPRING 80 N - ALUMINIUM DOOR MZ MM GREY DESCRIPTION CODE DESCRIPTION CODE SHELF SUPPORT CLEAR SHELF SUPPORT WHITE SHELF SUPPORT GLASS YA SHELF SUPPORT NICKEL SHELF SUPPORT NICKEL YA SHELF SUPPORT GLASS SHELF SUPPORT PIN

44 OMNI KNOCK DOWN FITTINGS CAMFIX METAL CAMFIX PLASTIC CAMFIX PLASTIC T3201 T3201B T3201W 20 Ø X Ø X Ø X 13 NICKLE BROWN WHITE WEDGEFIX T Ø X 12 WHITE WEDGEFIX T3241B 20 Ø X 12 BROWN DOWEL 5 MM EURO T Ø X 11 ZINC DOWEL 5 MM EURO SHORT T Ø X 7.5 ZINC DOWEL M4 T M4 X 7.5 ZINC SLEEVE T Ø X M4 X 15 RAW CAM FITTING 15 MM T Ø X 12 ZINC

45 OMNI KNOCK DOWN FITTINGS DOWEL STEEL 5 MM - EURO THREAD T Ø X 34 RAW DOWEL STEEL M6 T3462 M6 X 34 RAW DOWEL STEEL M4 T3470 M4 X 34 RAW QUICKFIT BOLT 8 X 34 MM EXPANDING DOWEL T Ø X 34 ZINC INSERT PLASTIC 10 MM X M6 T Ø X 13 X M6 WHITE INSERT PLASTIC 8 MM X M6 T Ø X 13 X M6 WHITE EURO SCREW COUNTERSUNK EURO SCREW COUNTERSUNK EURO SCREW PAN HEAD EURO SCREW COUNTERSUNK FOR GRASS PRODUCTS F X 10 6 X 13 6 X 13 6 X 11.5 NICKEL NICKEL NICKEL NICKEL CONNECTING SCREW 5 MM X 5 NICKLE

46 ENVIRONMENTAL PROTECTION Since the end of 2010, the GRASS group has been certified to the international environment management standard DIN ISO Environmental protection in practice is an important prerequisite for sustainable company success. This means using resources carefully and creating ecologically sound production conditions. We therefore aim to avoid environmental pollution at source. This applies to the entire product cycle from the initial idea to production, service life and through to disposal.

47 VIONARO DRAWER SYSTEM

48 -(RSA) Grass Advertising All errors and omissions excepted 2017 Grass ZA (Pty) Ltd. 2 Graph Avenue Montague Gardens 7441 Cape Town, South Africa Phone Fax info@grass.co.za Grass ZA (Pty) Ltd. 8 Vervoer Street Kya Sand Johannesburg 2163 South Africa Phone