Introducing: TRI*COMPOSITE Pipe Supports
|
|
|
- Rosanna Blair
- 5 years ago
- Views:
Transcription
1 Page1 Introducing: TRI*COMPOSITE Pipe Supports
2 Page2 TABE OF CONTENTS Introduction to TRI*COMPOSITE 3 TRI*COMPOSITE Duty Cycle... 4 Part Number Description 5 Range of Sizes and Composition. 6 ight Duty 30⁰, 60⁰ and 90⁰... 7 Medium Duty 30⁰, 60⁰ and 90⁰. 8 Heavy Duty 30⁰, 60⁰ and 90⁰ 9 ight Duty 120⁰ 10 Medium Duty 120⁰.. 11 Heavy Duty 120⁰. 12 ight Duty 180⁰ 13 Medium Duty 180⁰.. 14 Heavy Duty 180⁰. 15 Guided 30⁰ and 60⁰ Supports Guided 90⁰ and 120⁰ Supports. 17 Guided 180⁰ Supports 18 Page
3 Introduction to TRI*COMPOSITE Pipe Supports This is an exclusive premier product where traditional metal pipe supports do not provide all of the requirements needed for particular applications. TRI*COMPOSITE is a unique product that enhances temperature and corrosion insulation properties. These Pipe Supports also have greater fire retardant capabilities than exclusively Polyurethane supports. TRI*COMPOSITE Pipe Supports avoid metal-to-metal contact and can be used on insulated or un-insulated pipelines. These Pipe Supports act as insulators and prevent surface corrosion by keeping out moisture, isolating electrical continuity and have a superior chemical resistance. Made from Fiberglass reinforced Vinyl Ester or Epoxy resins it provides a non-conductive surface that has from 35,000 to 45,000 psi compressive strength and operating temperatures from -60 ⁰F to 275 ⁰F depending on selected materials. here required, we can provide Polypropylene, Aramid or Carbon fiber reinforcement to even further enhance the flexure, impact and vibration resistance or strength of your unique application needs. Our TRI*COMPOSITE Pipe Supports insulates from induced electrical currents that may filter from the ground acting as a barrier that can cause localized corrosion to your pipeline while also inhibiting electrical shock. It further is lighter and more transportable speeding up installations and reducing transportation costs. Our TRI*COMPOSITE Pipe Supports have the fiberglass reinforced matrix bonded to various densities of Polyurethane Foam core. These combined materials provide greater bearing strengths while at the same time acting as a corrosion, electrical and insulation barrier. TRI*COMPOSITE Guided Pipe Supports are available for medium and heavy duty rated supports. These are stainless over stainless or PTFE over stainless as described in our TRI*SIDE guides. Page3
4 Page4 ight Duty TRI*COMPOSITE Pipe Support Our ight Duty composite pipe supports have the selected bearing pad bonded a Polyurethane foam base, typically of 2 lb/in² and 4 lb/in². Base remains unreinforced and can be surface coated with UV resistant coating or bonded into a continuous foam insulated and shielded pipeline. Medium Duty TRI*COMPOSITE Pipe Support Our Medium Duty composite pipe supports have the selected bearing pad bonded a Polyurethane foam base, typically of 6 lb/in². These further have the same fiberglass reinforced matrix encasing longitudinally the Polyurethane foam base which is fused to the bearing pad with UV coating on exposed foam. Heavy Duty TRI*COMPOSITE Pipe Support Our Heavy Duty composite pipe supports have the selected bearing pad bonded a Polyurethane foam base, typically poured with 8 lb/in² to 20 lb/in² density foam. These further have the same fiberglass reinforced matrix encasing all sides of the Polyurethane foam base which is also fused to the bearing pad. ear pad surface thickness starts at 3/8 up to 20 pipe and increases to ½ thick above 24 pipe sizes. Guided TRI*COMPOSITE Pipe Supports TRI*COMPOSITE Pipe Supports are optionally available with our TRI*SIDE ow Friction Slide Bearings that allow axial movement that can be guided or directionally constrained. Please refer to our TRI*SIDE catalog for types, capacities and sizing for your slide bearing needs.
5 Page5 Part Number Description TYPICA SIZES Description Pipe Size ( ) Thickness ( ) Angle (⁰) ength ( ) Material TC V 3/4 1/ Vinyl Ester TC V 1 1/ Vinyl Ester TC E 1.5 1/ Epoxy TC V 2 1/ Vinyl Ester TC V 2.5 1/ Vinyl Ester TC E 3 1/ Epoxy TC V 3.5 1/ Vinyl Ester TC V 4 1/ Vinyl Ester TC E 4.5 1/ Epoxy TC V 5 1/ Vinyl Ester TC V 6 1/ Vinyl Ester TC E 8 1/ Epoxy TC V 10 1/ Vinyl Ester TC V 12 1/ Vinyl Ester TC E 14 1/ Epoxy TC V 16 1/ Vinyl Ester TC V 18 1/ Vinyl Ester TC E 20 3/ Epoxy TC V 24 3/ Vinyl Ester TC V 30 3/ Vinyl Ester TC E 32 3/ Epoxy TC V 36 3/ Vinyl Ester TC-XX-XX-XX-XX-V TC-XX-XX-XX-XX-E TC-XX-XX-XX-XX-P Vinyl Ester Resin Epoxy Resin Polyester Resin
6 SIZE RANGES & COMPOSITION ENGTH Standard Pipe Support engths: Custom Pipe Support engths: 12, 18, 24 (Typical 6 increments) 6 to 36 (any length in this range) Metric Sizes are available. RADIUS Standard Radius Angles: Custom Radius Angles: 30⁰, 60⁰, 90⁰, 120⁰, 180⁰ 15⁰ to 360⁰ (any radius in this range) THICKNESS Standard Thickness: Pipe sizes ¾ to 22 (1/4 ) Pipe sizes 24 to 36 (3/8 ) Heavy Duty Thickness: ½ to ¾ MATERIAS Standard Composites: Fiberglass + Vinyl Ester Resin Fiberglass + Epoxy Resin Custom Composites: Fiberglass + Polyimide Aramid + any above resin Polypropylene + any above resin GUIDED SUPPORTS Types: PTFE or Stainless over Stainless Graphite over Stainless or Carbon Page6
7 Page7 IGHT DUTY 30⁰, 60⁰ AND 90⁰ POYURETHANE PIPE IGHT DUTY SIZE SIZE A THICK. ANGE PAD THK 2" None 4" 90 1/4" 2 1/6" 6" TO 24" 2 1/2" None 4" 90 1/4" 2 3/8" 6" TO 24" 3" None 4" 90 1/4" 2 13/16" 6" TO 24" 3 1/2" None 4" 90 1/4" 3 3/16" 6" TO 24" 4" None 4" 90 1/4" 3 9/16" 6" TO 24" 6" None 4" 60 1/4" 3 9/16" 6" TO 24" 8" None 4" 60 1/4" 4 9/16" 6" TO 24" 10" None 4" 60 1/4 5 5/8" 6" TO 24" 12" None 4" 30 1/4" 3 7/16" 6" TO 24" 14" None 4" 30 1/4" 3 3/4" 6" TO 24" 16" None 4" 30 1/4" 4 1/4" 6" TO 24" 18" None 4" 30 1/4" 4 13/16" 6" TO 24" 20" None 4" 30 1/4" 5 5/16" 6" TO 24" 24" None 4" 30 3/8" 6 3/8" 6" TO 24" 26" None 4" 30 3/8" 6 15/16" 6" TO 24" 28" None 4" 30 3/8" 7 7/16" 6" TO 24" 30" None 4" 30 3/8" 7 15/16" 6" TO 24" 32" None 4" 30 3/8" 8 1/2" 6" TO 24" 34" None 4" 30 3/8" 9" 6" TO 24" 36" None 4" 30 3/8" 9 1/2" 6" TO 24" 38" None 4" 30 3/8" 10" 6" TO 24" 40" None 4" 30 3/8" 10 9/16" 6" TO 24" 42" None 4" 30 3/8" 11 1/16" 6" TO 24" 44" None 4" 30 3/8" 11 9/16" 6" TO 24" 46" None 4" 30 3/8" 12 1/8" 6" TO 24" 48" None 4" 30 3/8" 12 5/8" 6" TO 24"
8 Page8 MEDIUM DUTY 30⁰, 60⁰ AND 90⁰ POYURETHANE PIPE MEDIUM DUTY SIZE SIZE A THICK. ANGE PAD THK 2" 1/4" 4" 90 1/4" 2 1/6" 6" TO 24" 2 1/2" 1/4" 4" 90 1/4" 2 3/8" 6" TO 24" 3" 1/4" 4" 90 1/4" 2 13/16" 6" TO 24" 3 1/2" 1/4" 4" 90 1/4" 3 3/16" 6" TO 24" 4" 1/4" 4" 90 1/4" 3 9/16" 6" TO 24" 6" 1/4" 4" 60 1/4" 3 9/16" 6" TO 24" 8" 1/4" 4" 60 1/4" 4 9/16" 6" TO 24" 10" 1/4" 4" 60 1/4" 5 5/8" 6" TO 24" 12" 1/4" 4" 30 1/4" 3 7/16" 6" TO 24" 14" 1/4" 4" 30 1/4" 3 3/4" 6" TO 24" 16" 1/4" 4" 30 1/4" 4 1/4" 6" TO 24" 18" 1/4" 4" 30 1/4" 4 13/16" 6" TO 24" 20" 1/4" 4" 30 1/4" 5 5/16" 6" TO 24" 24" 3/8" 4" 30 3/8" 6 3/8" 6" TO 24" 26" 3/8" 4" 30 3/8" 6 15/16" 6" TO 24" 28" 3/8" 4" 30 3/8" 7 7/16" 6" TO 24" 30" 3/8" 4" 30 3/8" 7 15/16" 6" TO 24" 32" 3/8" 4" 30 3/8" 8 1/2" 6" TO 24" 34" 3/8" 4" 30 3/8" 9" 6" TO 24" 36" 3/8" 4" 30 3/8" 9 1/2" 6" TO 24" 38" 3/8" 4" 30 3/8" 10" 6" TO 24" 40" 3/8" 4" 30 3/8" 10 9/16" 6" TO 24" 42" 3/8" 4" 30 3/8" 11 1/16" 6" TO 24" 44" 3/8" 4" 30 3/8" 11 9/16" 6" TO 24" 46" 3/8" 4" 30 3/8" 12 1/8" 6" TO 24" 48" 3/8" 4" 30 3/8" 12 5/8" 6" TO 24"
9 Page9 HEAVY DUTY 30⁰, 60⁰ AND 90⁰ POYURETHANE CORE PIPE HEAVY DUTY SIZE SIZE A THICK. ANGE PAD THK 2" 3/8" 4" 90 3/8" 2 1/6" 6" TO 24" 2 1/2" 3/8" 4" 90 3/8" 2 3/8" 6" TO 24" 3" 3/8" 4" 90 3/8" 2 13/16" 6" TO 24" 3 1/2" 3/8" 4" 90 3/8" 3 3/16" 6" TO 24" 4" 3/8" 4" 90 3/8" 3 9/16" 6" TO 24" 6" 3/8" 4" 60 3/8" 3 9/16" 6" TO 24" 8" 3/8" 4" 60 3/8" 4 9/16" 6" TO 24" 10" 3/8" 4" 60 3/8" 5 5/8" 6" TO 24" 12" 3/8" 4" 30 3/8" 3 7/16" 6" TO 24" 14" 3/8" 4" 30 3/8" 3 3/4" 6" TO 24" 16" 3/8" 4" 30 3/8" 4 1/4" 6" TO 24" 18" 3/8" 4" 30 3/8" 4 13/16" 6" TO 24" 20" 3/8" 4" 30 3/8" 5 5/16" 6" TO 24" 24" 1/2" 4" 30 1/2" 6 3/8" 6" TO 24" 26" 1/2" 4" 30 1/2" 6 15/16" 6" TO 24" 28" 1/2" 4" 30 1/2" 7 7/16" 6" TO 24" 30" 1/2" 4" 30 1/2" 7 15/16" 6" TO 24" 32" 1/2" 4" 30 1/2" 8 1/2" 6" TO 24" 34" 1/2" 4" 30 1/2" 9" 6" TO 24" 36" 1/2" 4" 30 1/2" 9 1/2" 6" TO 24" 38" 1/2" 4" 30 1/2" 10" 6" TO 24" 40" 1/2" 4" 30 1/2" 10 9/16" 6" TO 24" 42" 1/2" 4" 30 1/2" 11 1/16" 6" TO 24" 44" 1/2" 4" 30 1/2" 11 9/16" 6" TO 24" 46" 1/2" 4" 30 1/2" 12 1/8" 6" TO 24" 48" 1/2" 4" 30 1/2" 12 5/8" 6" TO 24"
10 Page10 IGHT DUTY 120⁰ POYURETHANE PIPE IGHT DUTY SIZE SIZE A THICK. ANGE PAD THK 2" None 4" 120 3/8" 2 1/2" 6" TO 24" 2 1/2" None 4" 120 3/8" 2 15/16" 6" TO 24" 3" None 4" 120 3/8" 3 7/16" 6" TO 24" 3 1/2" None 4" 120 3/8" 3 7/8" 6" TO 24" 4" None 4" 120 3/8" 4 5/16" 6" TO 24" 6" None 4" 120 3/8" 6 3/16" 6" TO 24" 8" None 4" 120 3/8" 7 7/8" 6" TO 24" 10" None 4" 120 3/8" 9 3/4" 6" TO 24" 12" None 4" 120 3/8" 11 1/2" 6" TO 24" 14" None 4" 120 3/8" 12 9/16" 6" TO 24" 16" None 4" 120 3/8" 14 5/16" 6" TO 24" 18" None 4" 120 3/8" 16" 6" TO 24" 20" None 4" 120 3/8" 17 3/4" 6" TO 24" 24" None 4" 120 1/2" 21 7/16" 6" TO 24" 26" None 4" 120 1/2" 23 3/16" 6" TO 24" 28" None 4" 120 1/2" 24 7/8" 6" TO 24" 30" None 4" 120 1/2" 26 5/8" 6" TO 24" 32" None 4" 120 1/2" 28 3/8" 6" TO 24" 34" None 4" 120 1/2" 30 1/8" 6" TO 24" 36" None 4" 120 1/2" 31 13/16" 6" TO 24" 38" None 4" 120 1/2" 33 9/16" 6" TO 24" 40" None 4" 120 1/2" 35 5/16" 6" TO 24" 42" None 4" 120 1/2" 37" 6" TO 24" 44" None 4" 120 1/2" 38 3/4 6" TO 24" 46" None 4" 120 1/2" 40 1/2" 6" TO 24" 48" None 4" 120 1/2" 42 3/16" 6" TO 24"
11 Page11 MEDIUM DUTY 120⁰ POYURETHANE PIPE MEDIUM DUTY SIZE SIZE A THICK. ANGE PAD THK 2" 1/4" 4" 120 1/4" 2 1/2" 6" TO 24" 2 1/2" 1/4" 4" 120 1/4" 2 15/16" 6" TO 24" 3" 1/4" 4" 120 1/4" 3 7/16" 6" TO 24" 3 1/2" 1/4" 4" 120 1/4" 3 7/8" 6" TO 24" 4" 1/4" 4" 120 1/4" 4 5/16" 6" TO 24" 6" 1/4" 4" 120 1/4" 6 3/16" 6" TO 24" 8" 1/4" 4" 120 1/4" 7 7/8" 6" TO 24" 10" 1/4" 4" 120 1/4" 9 3/4" 6" TO 24" 12" 1/4" 4" 120 1/4" 11 1/2" 6" TO 24" 14" 1/4" 4" 120 1/4" 12 9/16" 6" TO 24" 16" 1/4" 4" 120 1/4" 14 5/16" 6" TO 24" 18" 1/4" 4" 120 1/4" 16" 6" TO 24" 20" 1/4" 4" 120 1/4" 17 3/4" 6" TO 24" 24" 3/8" 4" 120 3/8" 21 7/16" 6" TO 24" 26" 3/8" 4" 120 3/8" 23 3/16" 6" TO 24" 28" 3/8" 4" 120 3/8" 24 7/8" 6" TO 24" 30" 3/8" 4" 120 3/8" 26 5/8" 6" TO 24" 32" 3/8" 4" 120 3/8" 28 3/8" 6" TO 24" 34" 3/8" 4" 120 3/8" 30 1/8" 6" TO 24" 36" 3/8" 4" 120 3/8" 31 13/16" 6" TO 24" 38" 3/8" 4" 120 3/8" 33 9/16" 6" TO 24" 40" 3/8" 4" 120 3/8" 35 5/16" 6" TO 24" 42" 3/8" 4" 120 3/8" 37" 6" TO 24" 44" 3/8" 4" 120 3/8" 38 3/4 6" TO 24" 46" 3/8" 4" 120 3/8" 40 1/2" 6" TO 24" 48" 3/8" 4" 120 3/8" 42 3/16" 6" TO 24"
12 Page12 HEAVY DUTY 120⁰ POYURETHANE CORE PIPE HEAVY DUTY SIZE SIZE A THICK. ANGE PAD THK 2" 3/8" 4" 120 3/8" 2 1/2" 6" TO 24" 2 1/2" 3/8" 4" 120 3/8" 2 15/16" 6" TO 24" 3" 3/8" 4" 120 3/8" 3 7/16" 6" TO 24" 3 1/2" 3/8" 4" 120 3/8" 3 7/8" 6" TO 24" 4" 3/8" 4" 120 3/8" 4 5/16" 6" TO 24" 6" 3/8" 4" 120 3/8" 6 3/16" 6" TO 24" 8" 3/8" 4" 120 3/8" 7 7/8" 6" TO 24" 10" 3/8" 4" 120 3/8" 9 3/4" 6" TO 24" 12" 3/8" 4" 120 3/8" 11 1/2" 6" TO 24" 14" 3/8" 4" 120 3/8" 12 9/16" 6" TO 24" 16" 3/8" 4" 120 3/8" 14 5/16" 6" TO 24" 18" 3/8" 4" 120 3/8" 16" 6" TO 24" 20" 3/8" 4" 120 3/8" 17 3/4" 6" TO 24" 24" 1/2" 4" 120 1/2" 21 7/16" 6" TO 24" 26" 1/2" 4" 120 1/2" 23 3/16" 6" TO 24" 28" 1/2" 4" 120 1/2" 24 7/8" 6" TO 24" 30" 1/2" 4" 120 1/2" 26 5/8" 6" TO 24" 32" 1/2" 4" 120 1/2" 28 3/8" 6" TO 24" 34" 1/2" 4" 120 1/2" 30 1/8" 6" TO 24" 36" 1/2" 4" 120 1/2" 31 13/16" 6" TO 24" 38" 1/2" 4" 120 1/2" 33 9/16" 6" TO 24" 40" 1/2" 4" 120 1/2" 35 5/16" 6" TO 24" 42" 1/2" 4" 120 1/2" 37" 6" TO 24" 44" 1/2" 4" 120 1/2" 38 3/4 6" TO 24" 46" 1/2" 4" 120 1/2" 40 1/2" 6" TO 24" 48" 1/2" 4" 120 1/2" 42 3/16" 6" TO 24"
13 Page13 IGHT DUTY 180⁰ POYURETHANE PIPE IGHT DUTY SIZE SIZE A THICK. ANGE PAD THK 2" None 4" 180 3/8" 2 7/8" 6" TO 24" 2 1/2" None 4" 180 3/8" 3 3/8" 6" TO 24" 3" None 4" 180 3/8" 4" 6" TO 24" 3 1/2" None 4" 180 3/8" 4 1/2" 6" TO 24" 4" None 4" 180 3/8" 5" 6" TO 24" 6" None 4" 180 3/8" 7 1/8" 6" TO 24" 8" None 4" 180 3/8" 9 1/8" 6" TO 24" 10" None 4" 180 3/8" 11 1/4" 6" TO 24" 12" None 4" 180 3/8" 13 1/4" 6" TO 24" 14" None 4" 180 3/8" 14 1/2" 6" TO 24" 16" None 4" 180 3/8" 16 1/2" 6" TO 24" 18" None 4" 180 3/8" 18 1/2 6" TO 24" 20" None 4" 180 3/8" 20 1/2" 6" TO 24" 24" None 4" 180 1/2" 24 3/4" 6" TO 24" 26" None 4" 180 1/2" 26 3/4" 6" TO 24" 28" None 4" 180 1/2" 28 3/4" 6" TO 24" 30" None 4" 180 1/2" 30 3/4" 6" TO 24" 32" None 4" 180 1/2" 32 3/4" 6" TO 24" 34" None 4" 180 1/2" 34 3/4" 6" TO 24" 36" None 4" 180 1/2" 36 3/4" 6" TO 24" 38" None 4" 180 1/2" 38 3/4" 6" TO 24" 40" None 4" 180 1/2" 40 3/4" 6" TO 24" 42" None 4" 180 1/2" 42 3/4" 6" TO 24" 44" None 4" 180 1/2" 44 3/4" 6" TO 24" 46" None 4" 180 1/2" 46 3/4" 6" TO 24" 48" None 4" 180 1/2" 48 3/4" 6" TO 24"
14 Page14 MEDIUM DUTY 180⁰ POYURETHANE PIPE MEDIUM DUTY SIZE SIZE A THICK. ANGE PAD THK 2" 1/4" 4" 180 1/4" 2 7/8" 6" TO 24" 2 1/2" 1/4" 4" 180 1/4" 3 3/8" 6" TO 24" 3" 1/4" 4" 180 1/4" 4" 6" TO 24" 3 1/2" 1/4" 4" 180 1/4" 4 1/2" 6" TO 24" 4" 1/4" 4" 180 1/4" 5" 6" TO 24" 6" 1/4" 4" 180 1/4" 7 1/8" 6" TO 24" 8" 1/4" 4" 180 1/4" 9 1/8" 6" TO 24" 10" 1/4" 4" 180 1/4" 11 1/4" 6" TO 24" 12" 1/4" 4" 180 1/4" 13 1/4" 6" TO 24" 14" 1/4" 4" 180 1/4" 14 1/2" 6" TO 24" 16" 1/4" 4" 180 1/4" 16 1/2" 6" TO 24" 18" 1/4" 4" 180 1/4" 18 1/2 6" TO 24" 20" 1/4" 4" 180 1/4" 20 1/2" 6" TO 24" 24" 3/8" 4" 180 3/8" 24 3/4" 6" TO 24" 26" 3/8" 4" 180 3/8" 26 3/4" 6" TO 24" 28" 3/8" 4" 180 3/8" 28 3/4" 6" TO 24" 30" 3/8" 4" 180 3/8" 30 3/4" 6" TO 24" 32" 3/8" 4" 180 3/8" 32 3/4" 6" TO 24" 34" 3/8" 4" 180 3/8" 34 3/4" 6" TO 24" 36" 3/8" 4" 180 3/8" 36 3/4" 6" TO 24" 38" 3/8" 4" 180 3/8" 38 3/4" 6" TO 24" 40" 3/8" 4" 180 3/8" 40 3/4" 6" TO 24" 42" 3/8" 4" 180 3/8" 42 3/4" 6" TO 24" 44" 3/8" 4" 180 3/8" 44 3/4" 6" TO 24" 46" 3/8" 4" 180 3/8" 46 3/4" 6" TO 24" 48" 3/8" 4" 180 3/8" 48 3/4" 6" TO 24"
15 Page15 HEAVY DUTY 180⁰ POYURETHANE CORE PIPE HEAVY DUTY SIZE SIZE A THICK. ANGE PAD THK 2" 3/8" 4" 180 3/8" 3 1/8" 6" TO 24" 2 1/2" 3/8" 4" 180 3/8" 3 5/8" 6" TO 24" 3" 3/8" 4" 180 3/8" 4 1/4" 6" TO 24" 3 1/2" 3/8" 4" 180 3/8" 4 3/4" 6" TO 24" 4" 3/8" 4" 180 3/8" 5 1/4" 6" TO 24" 6" 3/8" 4" 180 3/8" 7 3/8" 6" TO 24" 8" 3/8" 4" 180 3/8" 9 3/8" 6" TO 24" 10" 3/8" 4" 180 3/8" 11 1/2" 6" TO 24" 12" 3/8" 4" 180 3/8" 13 1/2" 6" TO 24" 14" 3/8" 4" 180 3/8" 14 3/4" 6" TO 24" 16" 3/8" 4" 180 3/8" 16 3/4" 6" TO 24" 18" 3/8" 4" 180 3/8" 18 3/4" 6" TO 24" 20" 3/8" 4" 180 3/8" 20 3/4" 6" TO 24" 24" 1/2" 4" 180 1/2" 25" 6" TO 24" 26" 1/2" 4" 180 1/2" 27" 6" TO 24" 28" 1/2" 4" 180 1/2" 29" 6" TO 24" 30" 1/2" 4" 180 1/2" 31" 6" TO 24" 32" 1/2" 4" 180 1/2" 33" 6" TO 24" 34" 1/2" 4" 180 1/2" 35" 6" TO 24" 36" 1/2" 4" 180 1/2" 37" 6" TO 24" 38" 1/2" 4" 180 1/2" 39" 6" TO 24" 40" 1/2" 4" 180 1/2" 41" 6" TO 24" 42" 1/2" 4" 180 1/2" 43" 6" TO 24" 44" 1/2" 4" 180 1/2" 45" 6" TO 24" 46" 1/2" 4" 180 1/2" 47" 6" TO 24" 48" 1/2" 4" 180 1/2" 49" 6" TO 24"
16 Page16 Guided TRI*COMPOSITE Pipe Supports Guided Medium Duty 30⁰ and 60⁰ using TRI*SIDE Slides POYURETHANE Guided Heavy Duty 30⁰ and 60⁰ using TRI*SIDE Slides POYURETHANE CORE
17 Page17 Guided Medium Duty 90⁰ and 120⁰ using TRI*SIDE Slides POYURETHANE Guided Heavy Duty 90⁰ and 120⁰ using TRI*SIDE Slides POYURETHANE CORE
18 Page18 Guided Medium Duty 180⁰ using TRI*SIDE Slides POYURETHANE Guided Heavy Duty 180⁰ using TRI*SIDE Slides POYURETHANE CORE
EMI Shielding and Grounding Materials
EMI Shielding and Grounding Materials P-SHIELD Shielding and Grounding Materials Polymer Science, Inc. offers a complete EMI shielding and grounding materials product line. P-SHIELD EMI shielding materials
EMI Shielding and Grounding Materials
EMI Shielding and Grounding Materials P-SHIELD Shielding and Grounding Materials Polymer Science, Inc. offers a complete EMI shielding and grounding materials product line. P-SHIELD EMI shielding materials
FABRICS & BAGGING Fiberglass Cloth. Kevlar Cloth. Carbon Fiber Cloth. Mia Vacuum Bagging Supplies
FABRICS & BAGGING This comprehensive selection of materials from the biggest names in the industry offers solutions for the construction of large, lightweight molds and production parts. 62-63 Fiberglass
PORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
Solid Carbide Tools. Composite Tools. Performance by Design. ISO 9001 Certified Company
Solid Carbide Tools Composite Tools Performance by Design ISO 9001 Certified Company As one of the world s largest manufacturers of solid carbide rotary cutting tools, SGS Tool Company has pioneered some
0226/18-V1-02 IMTEC HR. High mechanical Resistance fastener for composite materials
0226/18-V1-02 IMTEC HR High mechanical Resistance fastener for composite materials IMTEC HR Cold forged fastener BÖLLHOFF used its expertise in assembly technologies to combine the best of metals and plastics.
PRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
Industrial and Transportation Business DISTRIBUTOR PRODUCT LINE
Industrial and Transportation Business DISTRIBUTOR PRODUCT LINE 3900 DUCT TAPE 3900 DUCT TAPE MRO (Maintenance and Repair) Construction Trade Shows and Conventions General Industrial Electrical Aerospace
STRONGWELL PULTRUDED GRATING
STRONGWELL PULTRUDED GRATING DURADEK and DURAGRID are high-strength pultruded bar type gratings that can be designed and used like traditional metal grates but have the inherent benefits of fiberglass.
Section 914. JOINT AND WATERPROOFING MATERIALS
914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.
United States Patent (19)
United States Patent (19) Simpson et al. (11) 4,422,286 45 Dec. 27, 1983 (54) 75 73) 21 22 (51) (52) 58) FBER RENFORCED PASTIC IMPREGNATED WIRE ROPE Inventors: Neville H. Simpson, Kenosha, Wis.; Peter
Packaging. Tape you can trust PPM PACKAGING
Packaging Tape you can trust 14 15 PPM s portfolio of packaging tapes features effective solutions for the variety of sizes, materials, weights and storage methods used in the packaging sector. Each packaging
SKF filament wound bushings
SKF filament wound bushings The maintenance-free heavy-duty bushing High load carrying capacity Corrosion resistant Maintenance-free Maintenance-free, durable, cost-effective Filament wound material provides
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
CARTON SEALING TAPES PRODUCT INFORMATION SALES GUIDE Marquardt Avenue Santa Fe Springs CA Phone Fax
CARTON SEALING TAPES PRODUCT INFORMATION SALES GUIDE PRESSURE SENSITIVE TAPE Adhesive Film Four Types of Adhesive Water-Based Acrylic Solvent-Based Acrylic Hot Melt (Synthetic Rubber) Natural Rubber Three
Ductwork Controls and Instrumentation Outlets (HVAC) HVAC Control System.
SECTION 15910 DUCT ACCESSORIES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15890 - Ductwork. 2. 15900 - Controls and Instrumentation. 3. 15940 - Outlets (HVAC). 4. 15970 - HVAC Control System.
LCSF Low Clearance Split Frame
Designed For Portability And Limited Clearance Full Range 2in - 48in for Pipe and Tube Optional Bridge Slide for Heavy Wall Pipe EXTERNALLY MOUNTED PORTABLE PIPE CUTTING AND BEVELING SYSTEM E.H. Wachs
7-1
Tube Cleaning Brushes Fitting Cleaning Brushes available with wire or plastic handle Fitting Cleaning Brushes clean the inside of fittings faster. For plumbing or refrigeration applications. Carbon steel
FRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1
FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...
SECTION LABORATORY CASEWORK AND EQUIPMENT
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 12 35 53 LABORATORY CASEWORK AND EQUIPMENT A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
+91-8048718632 Arrow Technical Textiles Private Limited http://www.arrowtechnicaltextiles.co.in/ We are a renowned manufacturer, supplier, distributor and importer of a wide range of Composite Raw Materials.
(12) Patent Application Publication (10) Pub. No.: US 2006/ A1
(19) United States US 2006O121805A1 (12) Patent Application Publication (10) Pub. No.: US 2006/0121805 A1 Krulic (43) Pub. Date: Jun. 8, 2006 (54) NON-WOVEN, UNI-DIRECTIONAL MULT-AXAL RENFORCEMENT FABRIC
Magnum TM Cartridge Heaters
Magnum TM INTRODUCTION Magnum cartridge heaters are swaged designs, made for use in applications where high density, high temperatures and long service life are critical to minimize mold service downtime
Берг АБ Тел. (495) , факс (495)
SKF bushings Contents BUSHING S ELECTION World s Widest Bushing Stock Assortment 2 SKF Bushings Product Guide 4 SKF Bushings Technical Data 6 Bushing Selection Overview of Technical Data Temperature range
WORKING of nidaplast
nida 8/gb - 03.07.07 Technical Information. 2 WORKING of nidaplast nidaplast is a polypropylene honeycomb covered on both faces with a soft polyester nonwoven fabric. It is available in 2500 x 1200 mm
Endura-Classic Craftsman Information
Endura-Classic Craftsman Information Endura Classic Craftsman Series Columns have a Limited Lifetime Warranty against rot, corrosion and moisture damage. Endura Classic Craftsman Series Columns are manufactured
Cost Reduction in Frontier Deepwater Riser Systems
NH GRAND HOTEL KRASNAPOLSKY AMSTERDAM 3-5 APRIL 2017 Cost Reduction in Frontier Deepwater Riser Systems Ray Burke Global Product Leader GE Oil & Gas Applications Subsea Production, Injection, Export Combines
CARTON SEALING TAPES PRODUCT INFORMATION SALES GUIDE Marquardt Avenue Santa Fe Springs CA Phone Fax
CARTON SEALING TAPES PRODUCT INFORMATION SALES GUIDE PRESSURE SENSITIVE TAPE Adhesive Film Four Types of Adhesive Water-Based Acrylic Solvent-Based Acrylic Hot Melt (Synthetic Rubber) Natural Rubber Three
Glass Curtain Wall. 1. Point Supported Glass Curtain Wall 2. Exposed-Frame Glass Curtain Wall 3. Hidden-Frame Glass Curtain Wall
Glass Curtain Wall 1. Point Supported Glass Curtain Wall 2. Exposed-Frame Glass Curtain Wall 3. Hidden-Frame Glass Curtain Wall Project case Point Supported Glass Curtain wall is made by glass panel, point
4.1. Foremen 4.2. Concrete plant manager 4.3. Concrete plant operator 4.4. Personnel performing saw cutting and joint sealing
10-1. JOINTED PLAIN CONCRETE PAVEMENT GENERAL Summary This work includes constructing jointed plain concrete pavement. Comply with Section 40, "Concrete Pavement," of the Standard Specifications. Submittals
FABRIC AND CONSTRUCTION
PREMIUM SCREEN GAMMA Premium Screen windscreens is our most durable material, outlasting even Endura Screen. At 10.0 oz./sq. yd, Premium Screen gives you 30 percent more material than traditional 7 oz./sq.
GENERAL PURPOSE DRY-TYPE DISTRIBUTION TRANSFORMERS
GENERAL PURPOSE DRY-TYPE DISTRIBUTION TRANSFORMERS Acme offers a large selection of Dry-Type Distribution Transformers. Ranging from 600 Volt and below, in both Single and Three Phase, you re sure to find
SECTION 19 FABRICATION
Section 19 SECTION 19 FABRICATION Look for this blue line in the left margin of the Design Manual documents. This line shows you where the latest update has been made. 19-1 GENERAL FABRICATION CONSIDERATIONS
SLIDING SYSTEMS. Product catalog 2017
SLIDING SYSTEMS Product catalog 2017 Grafipro Oy Product catalog 2017 Table of contents: 3 Areas of use 4 C rails C-30 is a company specialising in aluminium and plastic composite materials. Our expertise
Dowel Basket Standardization
Dowel Basket Standardization National Concrete Consortium San Antonio, TX March 31, 2009 John F. Staton Michigan DOT Summary of Dowel Basket Standardization Activities 2000 to Present Spring 2000 - Initial
+91-8048736724 Ameetuff Technical Paints Industries http://www.ameetuff.net/ We are one of the trusted manufacturers and exporters of a quality range of Fire retardant paints, for wood, structure steel,
Precision Thermistor Sensors
Precision Thermistor Sensors For Laboratory Applications ON-400 Series U For Use in Laboratory or Other High-Accuracy Applications U Rugged Construction Can Be Used for Short Term Water and Soil Readings
Tuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. Blue**) are made from fiberglass
Siemens Transformer Technology Seminar Insulation & Thermal Design
Customer Technical Meeting Pomona, CA May 24 25, 2016 Siemens Transformer Technology Seminar Insulation & Thermal Design Siemens AG Transformers siemens.com/answers Winding Selection Windings: Page 2 Winding
Tuf-Lite II Fans 3000H Series Hub
Tuf-Lite II Fans 3000H Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Fan Blades Hudson Tuf-Lite II (white, prev. blue**) fan blades are made from
Color Off-White Product Form Pound Trademark Name 1 3M Trademark Name 2 Scotch-Weld. Characteristics
3M Worldwide : United States : Government Solutions Product Catalog for Government Solutions Emergency Preparedness, Response & Recover 3. Emergency Recovery Restoration & Rebuilding 3M Adhesives 3M Jet-melt
Clamps. Preformed Clamping Systems. Clamps. Band-It. Band-It
Preformed Clamping Systems As industrial hose made of stiffer, thinner, thermoplastics replace soft, spongy, thickwalled rubber, a new generation of hose clamps has been developed to prevent leak problems.
ShowCase DELUXE, 3-LAYER CONSTRUCTION. Unrivaled Design. Unmatched Style. STEEL + INSULATION + STEEL CLICK.
ShowCase TM Unrivaled Design. Unmatched Style. CLICK www.raynor.com DELUXE, 3-LAYER CONSTRUCTION STEEL + INSULATION + STEEL ShowCase TM Unrivaled Design. Unmatched Style. More Than Good Looks With a substantial
COOLING TECHNOLOGY INSTITUTE AN INVESTIGATION OF PIN BEARING
PAPER NO: CATEGORY: TP1-24 MATERIALS COOLING TECHNOLOGY INSTITUTE AN INVESTIGATION OF PIN BEARING AN INVESTIGATION OF PIN BEARING STRENGTH ON COMPOSITE MATERIALS DUSTIN L. TROUTMAN JEREMEY D. MOSTOLLER
Tuf-Lite II Fans 3000HC Series Hub
Tuf-Lite II Fans 3000HC Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 8 through 10 Diameter Hudson Tuf-Lite II (White) are made from fiberglass reinforced vinyl-ester
SECTION LOW PRESSURE DUCTWORK
SECTION 15841 LOW PRESSURE DUCTWORK PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 07270 - Firestopping and Fire and Smoke Barrier Caulking. 2. 15260 - Vibration Isolation. 3. 15280 - Thermal Insulation
#wewanttositbetter ATENEA_FORM
#wewanttositbetter ATENEA_FORM BY Introducing the ATENEA_FORM The Future is_now. 2 atenea form We`re very pleased to introduce worldwide the DILE proposal for the challenges of New Education seating systems:
SECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
SPECIFICATION STEEL COUPLING MODEL 411
Sleeve Bolt Nut Follower Gasket 1/2 2 TWO BOLT 3 12 HIGH STRENGTH 2 12 SMALL O.D. 14 60 LARGE O.D. APPLICATIONS Typical Uses Joining plain-end pipe of same outside diameters Replace split or excessively
The NOVA Recloser shall be designed and tested in accordance with the following standards as applicable:
Reclosers NOVA Three-Phase Recloser Functional Specification Guide Functional specification for NOVA three-phase recloser 1. Scope This specification describes the features and ratings of the NOVA recloser.
United States Patent (19)
United States Patent (19) Killmeyer (54) APPARATUS FOR MAKING PULTRUDED PRODUCT (75) Inventor: Charles W. Killmeyer, Pittsburgh, Pa. 73) Assignee: PPG Industries, Inc., Pittsburgh, Pa. (21) Appl. No.:
Graphite quality x 1000 mm 1000 x 1000 mm. Roll length: m
H Flexible graphite foil, no adhesive HL ECM Flexible graphite foil, expanded carbon steel insert 0.50 mm, 0.25, 0.38, 0.50, 0.76, 1.00, 1.50 mm 1.50, 2.00, A B C yes / no 1.50 mm no Gasket material for
Processing of Plastics
Processing of Plastics Bachelor of Industrial Technology Management with Honours Semester I Session 2013/2014 TOPIC OUTLINE Introduction of Plastics Classification of Plastics Types of Plastic Plastics
ShowCase DELUXE, 3-LAYER CONSTRUCTION. Unrivaled Design. Unmatched Style. STEEL + INSULATION + STEEL CLICK
ShowCase TM Unrivaled Design. Unmatched Style. CLICK www.raynor.com DELUXE, 3-LAYER CONSTRUCTION STEEL + INSULATION + STEEL ShowCase TM Unrivaled Design. Unmatched Style. More Than Good Looks With a substantial
AUTOMATIC FLEXO PLATE MOUNTING MACHINE
SAMM 2.0 AUTOMATIC FLEXO PLATE MOUNTING MACHINE Widths Width [mm] 1300, 1700, 2200 Width [inch] 52, 67, 87 Max repeat [mm/inch] 1350 / 53 Description The patented SAMM 2.0 is AV Flexologic s solution to
Thru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
+91-8048077796 Astra Chemtech Private Limited http://www.astrachemtech.com/ Valued as a reliable manufacturer and exporter, we are engaged in offering the premium quality of Adhesives & Chemicals. Owing
SECTION PLASTIC FABRICATIONS PART I GENERAL 1.01 SECTION INCLUDES
SECTION 06 60 00 PLASTIC FABRICATIONS PART I GENERAL 1.01 SECTION INCLUDES A. Free-Foam Cellular PVC Trim Boards for corner boards, soffits, fascias, battens, door pilasters, frieze boards, rake boards,
STATIC AND FATIGUE STRENGTH EVALUATIONS FOR BOLTED COMPOSITE/STEEL JOINTS FOR HEAVY VEHICLE CHASSIS COMPONENTS
STATIC AND FATIGUE STRENGTH EVALUATIONS FOR BOLTED COMPOSITE/STEEL JOINTS FOR HEAVY VEHICLE CHASSIS COMPONENTS Xin Sun Battelle Columbus, OH 43201 Elizabeth Stephens and Darrell Herling Pacific Northwest
Mineral-insulated resistance thermometers to EN
Data Sheet 90.2221 Page 1/6 Mineral-insulated resistance thermometers to EN 60 751 for temperatures from -50 (-200) to +600 C flexible sheath with shock-protected sensor as single or twin resistance thermometer
General-purpose Foil Strain Gages KFG
General-purpose Foil Strain Gages KFG -8 General-purpose Foil Strain Gages in KFG Series Grid width Grid length (Gage length) Base length The KFG series gages use polyimide resin for the base approx. μm
Tuf-Lite III Fans 3000K Series Hub
Tuf-Lite III Fans 3000K Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
General Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
LV AIRGUARD. P r o ble m. ife? No S. a proven, rugged product for harsh environments
ife? No S n K P r o ble m! No? aw a proven, rugged product for harsh environments No LV AIRGUARD LV AIRGUARD Low Voltage Cables for Harsh Environments FEATURES - No Knife? No Saw? No Problem! installation
10 Hazlux Lighting US Brochure
0 Hazlux Lighting US Brochure Area lighting Hazlux 3 series Safe, durable, and now available with LED technology for superior energy efficiency, Thomas & Betts Hazlux products are the brand specifiers
THE ULTIMATE IN PERSONALIZATION
2015 THE ULTIMATE IN PERSONALIZATION WWW.CUSTOMCOLORSOLUTIONS.COM SIMPLE ONE PRICE There are no set-up, service, decoration, re-order, copy change and drop ship fees ever. The price you see is the price
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
A guide to. effective composite machining for aerospace components
A guide to effective composite machining for aerospace components Introduction Demands to reduce aircraft fuel consumption and minimise the greenhouse gas emissions associated with air travel is driving
Panels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 4000 Series Hub INSTALLATION MANUAL Hudson Tuf-Lite and Tuf-Lite II fan blades Adjustable Pitch Fan Assembly 15 thru 20 Diameter Hudson Tuf-Lite (black) fan blades are made
Safe & Unsafe Materials for the Laser Cutter
Safe & Unsafe Materials for the Laser Cutter BARNEYARTLABS.COM Any questions please email paula.rondon@nyu.edu UNSAFE ( NEVER CUT THESE MATERIALS) WARNING : Because many plastics are dangerous to cut,
Micro-Change. Cordset Family
Side Tab Cordset Family Small Space? Big Solution. When space and time are in short supply, look no further than Brad Harrison brand for the best, ready-made m connector solutions. For fast, compact migration
1. Section : Rough Carpentry 2. Section : Exterior Insulation and Finishing Systems 3. Section : Metal Roof Panels
SECTION 06 16 00 SHEATHING PART 1 GENERAL 1.1 SUMMARY A. Section includes: 1. Roof and Wall Sheathing. B. Related Sections: Documents relating to the work of this section include, but are not limited to,
Wrap-and-Fill Metalized Polyester Film Capacitors
Type 43P Wrap-and-Fill Metalized Polyester Film Capacitors EECTRICA SPECIFICATIONS Capacitance Range:.1 μf to 1. μf Range: 63 to 16, 4 VAC to 22 VAC Capacitance Tolerance: ±2%, ±1%, ±5% Operating Temperature:
SHIN KWANG HOT MELT CO., LTD.
ADCOPOLY SHIN KWANG HOT MELT CO., LTD. Hot Melt Adhesive Copolymer Resin and Film Manufacturer Address : CHEOMDAN-RO 285, Danwon-Gu, Ansan City, Kyeonggi Province, South Korea (Seonggok Dong, Sihwa Industrial
B. Sequencing: Schedule installation to keep sheathing exposure to UV within the manufacturer s recommended limits.
SECTION 06 16 43 GYPSUM SHEATHING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Exterior GMF gypsum sheathing. 2. Joint treatment materials. 3. Panel and penetration joint and fastener treatment.
RAKU-TOOL. Liquid Products. Casting, Laminating, Gelcoat and Multipurpose Resins. Our systems for your applications. discover the future
Liquid Products Casting, Laminating, Gelcoat and Multipurpose Resins. Our for your applications. discover the future Product Overview/2 Component Liquid Systems Resin (ISO 113) RAKU-TOOL Gelcoat Systems
60Hz Ratings. Typical Applications. Features & Characteristics. Ratings
The PCR is a solid-state device designed to simultaneously provide DC isolation and AC continuity/grounding when used with cathodically protected structures, such as pipelines, tanks, grounding systems,
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Tools Step Drill Bits
Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid
UL Construction No. 254
UL Construction No. Wind-Uplift - Class 90 (See Item No. ) / Fire Not Investigated Metal Roof Deck Panels* Snap-Clad No. MSG or No. MSG min. thickness coated steel panels. Panels in. wide max., 0 in. wide
Laboratory benches 3 and sinks
Laboratory benches 3 and sinks In our new SCALA laboratory furniture system, laboratory benches are of major significance. The consequent separation of services supply and furniture creates flexibility
SECTION SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR
SECTION 084229.33 SWINGING AUTOMATIC ENTRANCES IN-GROUND, AUTOMATIC SWING DOOR OPERATOR CONVERTER ADAPTED TO BROOKFIELD NB-500 EXTREME DUTY OPERATOR PART 1-GENERAL 1.01 DESCRIPTION A. This section describes
www. otech.com.sg EFS801 ELECTROMAGNETIC FLOWMETER
www. otech.com.sg EFS801 ELECTROMAGNETIC FLOWMETER 1 www. otech.com.sg EFS801 - CFT181/RFT201 ELECTROMAGNETIC FLOWMETER Accurate, Reliable and Stable Flow Measurement. Measuring Principle The measuring
Making Building Easy
Making Building Easy Discover the of Precast Choosing precast concrete during the design build process means your project has The Advantage. Precast is widely known for its high product quality and aesthetic
The available roof cover choices are listed below: Fiberglass, Translucent Panels Steel. Shingles, Asphalt/Fiberglass, Irregular Pattern
Navigation Roof Cover Roof Cover The different choices available for roof materials are listed below. Enter the percentage of each roof material found on the home. NOTE: Typically you would enter a percentage
Sight glass window Sight flow indicator
SIGHT GLASS Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. When it comes to selecting a sight glass, a wide variety of factors should be considered
ORDIC FIBERGLASS, INC.
s, 3 Phase Sectionalizing 15kV 200Amp s Nordic cabinets are produced of fire-retardant resin and a combination of chopped glass spray-up and hand lay-up using woven roving glass reinforcement, which adds
Hot Melt Adhesives Jet-melt & Hot Melt Spray. Distributed By:
Hot Melt Adhesives Jet-melt & Hot Melt Spray Distributed By: www.wilcox-slidders.com 3M Scotch-Weld Hot Melt Adhesives and Applicators The 3M systems approach to help you improve productivity and lower
Manufacturing Process - I
Manufacturing Process - I UNIT III Plastic Processing Prepared By Prof. Shinde Vishal Vasant Assistant Professor Dept. of Mechanical Engg. NDMVP S Karmaveer Baburao Thakare College of Engg. Nashik Contact
SEMPEO SQA Unit Code FP42 04 Producing Composite Mouldings using Wet Lay-up Techniques
Producing Composite Mouldings using Wet Lay-up Techniques Overview This standard covers a broad range of basic competences that you need to produce composite mouldings using wet-lay up laminating techniques.
Inteplast Trim Free Foam
Inteplast Trim Free Foam SECTION 06 60 00 PLASTIC FABRICATIONS PART 1 GENERAL 1.01 SECTION INCLUDES A. Inteplast Trim Free Foam cellular PVC boards used for corner boards, soffits, fascias, battens, door
Disassembly Instructions for Recycling June 10, 2010
Disassembly Instructions for Recycling June 10, 2010 These instructions apply to all workstation and wall products. Disassembly Once workstations or walls are dismantled as described under Disassembly
Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub
Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III Hi Temp (Red) fan blades are of single
Semek supplies specially designed, molded plastic products in polyurethane to platforms, components of subsea installations and abrasion exposed areas
Inlay Crane Cradles Semek supplies specially designed, molded plastic products in polyurethane to platforms, components of subsea installations and abrasion exposed areas The marked is located in the
N series General Stationary Surface Probes
N series General Stationary Surface Probes Model N series probes are general-purpose temperature sensors designed to measure the temperatures of stationary surfaces. Specific components may be combined
Portable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel PORTABLE HACKSAWS Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable
PIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120