Juego Operación para Makey Makey
|
|
- Frederica McCoy
- 5 years ago
- Views:
Transcription
1 Índice para Step 1: Materials...1 Step 2: Paint your operation game board...2 Step 3: DIY non-conductive tweezers...3 Step 4: Operating spots and back of the game board...4 Step 5: Make the body part objects to pull out of the game board...7 Step 6: Scratch and...8 Make a fun, life-sized operation game of your own character! Super easy project for all ages!
2 Step 1: Materials Materials needed: Kit Computer with Scratch Program (free online and offline modes) Cardboard Paint Aluminum Foil Glue Stick Clay/Sugru Chopsticks Rubberband Box Cutter Duct Tape 1
3 Step 2: Paint your operation game board Cut your cardboard to whatever size suits your project. Dream up what character you want to use and paint it on the front. My project was for an elementary school science fair interactive table, so I used a character the kids would recognize but not be too upset to operate on (like Elsa). 2
4 Step 3: DIY non-conductive tweezers After you have painted your character, make your tweezers out of chopsticks, a rubberband, paper, and foil. Wrap the two chopsticks in foil, gluing down as you go. You could also use other conductive materials like wire, copper tape, etc. At the top of the chopsticks I left extra foil twisted up and curving toward each other for the alligator clips to connect the tweezers to the makey makey later. Roll up a small piece of paper and put it between the chopsticks at the top. Wrap a rubberband around the paper and chopsticks to create tweezers with some resistance. 3
5 Step 4: Operating spots and back of the game board 4
6 Now that you know the size of your tweezers, you can plan out where you want your operation spots to be and draw the holes you are going to cut. Think about the size of your operating hole carefully- if it is too big it will be too easy to get the object out; if it is too small you won't be able to get the object out with the tweezers. Once you have the amount and size of operating holes drawn out, cut them out with the box cutter. Save the shapes you cut out for the next part. Next I made foil pockets and little supporting boxes for the back of the operating hole. I glued the cardboard that was cut out for the operating holes to a piece of aluminum foil. At one corner of the foil I twisted a small foil "rope" and folded up the rest of the foil to make the walls of the operating hole pocket. I then glued the cardboard base of the foil pocket into a small cardboard box that would surround and protect the foil. I cut a slit in the side of the box to let the twisted foil "rope" or "wire" out to be connected to the makey makey. From the back of the game board, I pushed the foil walls up through the operating hole shape and duct-taped the box flush to the back of the game board (with the twisted foil rope sticking out). Next I glued the edges of the walls down onto the game board to make the edge of the operating hole conductive. 5
7 After I made all my foil pockets, on the back of the game board I made each twisted foil rope longer and twisted them together in one spot to connect to the makey makey. If you want the game to make different sounds for each operating spot, then leave them separate. 6
8 Step 5: Make the body part objects to pull out of the game board I used clay to make the body parts for my minion and colored them with marker. I made only three: a leg bone, heart, and banana (bananas on the brain). Sugru is also a great material to use. Just make sure whatever object you use in not conductive, or else your buzzer will go off as soon as the tweezers touch the object! 7
9 Step 6: Scratch and 8
10 The beauty of is that it makes the computer think that you are pressing a key on the keyboard when you complete a circuit with conductive materials. For example, if you clip in a banana to the space bar and touch it while touching the ground, the banana becomes your space bar! So, when you make the programming on Scratch, use simple commands like "When the space bar is pressed, play buzzer sound" to make your operation game! My game is based on the project guide at I remixed the game in order to have an actual minion on the screen that changes color when the buzzer goes off. Scratch is super easy to use for anyone, whether you have coded before or not! Lastly, You will hook up the makey makey to bring your game to life! Plug in your makey makey with the USB cable. Using alligator clip/jumper cables (they come with the kit) connect the foil pockets to whichever key corresponds to your Scratch game coding (I used the space bar) on the makey makey. Next connect your tweezers to the ground on the makey makey. I used two jumper cables connected together to make the tweezer's reach go farther. Now you are set, start up your game and have fun! 9
Wanderlust Suitcase Vanity
Wanderlust Suitcase Vanity If you re like me, you re always up for an adventure. When I saw some examples of DIY reclaimed suitcases, paired with the exciting new Wanderlust embroidery design collection,
More informationWelcome to the DIY Thirsty Plant Kit - Manual
Welcome to the DIY Thirsty Plant Kit - Manual This is a step-by-step guide to making your own Thirsty Plant Detector. The equipment you should have at your station are wire strippers, wire cutters, wooden
More information4 Position the Suntile to the x tile s position and mark the felt around the square box flange. Then remove the Suntile
4 Position the Suntile to the x tile s position and mark the felt around the square box flange. Then remove the Suntile 5 Using a sharp bladed knife, cut through the felt from corner to corner in an x
More informationMakey Makey Classic How To
Makey Makey Classic How To Setup 1) Plug in USB Small side of USB cable plugs into Makey Makey, big side plugs into computer. 2) Close Popup Window Your computer may ask you to install drivers or do other
More informationMakey Go, How to use:
Makey Go, How to use: 1) Plug in USB The lights on the GO will dance a little, then settle on Blue. Blue = Right Click. 2) Close Popup Window (If Any) Your computer may ask you to install drivers or do
More informationGORE Aerospace Ethernet Cables
Termination Instructions The following procedures are based on Gore s best practices for terminating GORE Aerospace with the Carlisle Octax Connector System for both socket and plug versions. These procedures
More informationTerrific Papers Creative Project Instructions
Origami flowers You ll need: two sheets of Terrific Papers in the design of your choice, glue or a glue gun, small-diameter dowel, florist s tape, green construction paper, and scissors Note: Each flower
More informationBig Oz. Rocket. User Guide V0313
Big Oz Rocket User Guide 59824 V0313 Materials Included The Big Oz Rocket Kit should include the following materials. If something is missing, contact Customer Service at 800-358-4983. 20-ounce plastic
More informationSewing Instructions for Pocket Pinny Carol A. Brown
Sewing Instructions for Pocket Pinny Carol A. Brown Make this Pocket Pinny for yourself or for anyone else who jogs, walks or rides a bike. The reflective tape increases visibility at night and the pocket
More informationCardboard Circuit Playground Express Inchworm Robot
Cardboard Circuit Playground Express Inchworm Robot Created by Kathy Ceceri Last updated on 2018-10-25 05:41:17 PM UTC Guide Contents Guide Contents Overview Parts List -- Electronics Materials List --
More informationMake an Altoids Flashlight.
Make an Altoids Flashlight by JoshuaZimmerman on July 12, 2012 Table of Contents Make an Altoids Flashlight 1 Intro: Make an Altoids Flashlight 2 Step 1: Parts 2 Step 2: LED Holder 3 Step 3: Prepare Your
More informationPaper Pinwheel. Supplies
Paper Pinwheel 1. Draw some lines. Measure and cut a square piece of paper.» Use the ruler and pen to draw lines from each corner of the paper towards the center. These lines should be half the size of
More informationShine a Light for Children
Lantern Project Qld D.I.Y Lantern Making Make lanterns with your community group or school for Child Protection Week 2018! Hands on Art 150 Enogerra Tce Paddington Q 4064 Ph: 07 3876 5077 events@handsonart.org.au
More informationNever power this piano with anything other than a standard 9V battery!
Welcome to the exciting world of Digital Electronics! Who is this kit intended for? This kit is intended for anyone from ages 13 and above and assumes no previous knowledge in the field of hobby electronics.
More informationLANTERNS. Good & Evil. Give your room the warm enchanted glow of delicate paper lanterns. Tabletop Lanterns. Hanging Lanterns. Have an adult help you.
Good & Evil LANTERNS Give your room the warm enchanted glow of delicate paper lanterns. USE LED LIGHTS ONLY. DO NOT USE REAL CANDLES. Tabletop Lanterns Have an adult help you. Step 1: Print out (2) of
More informationDual Fidgety Art Bot. We enjoyed building our Trashy Art Bot just as much as our Fidgety Art Bot.
Dual Fidgety Art Bot Our instructions will take you through the step by step procedure to build a Dual Fidgety Art Bot, an Art Bot built with two fidget spinners stacked together. Since our investigation
More informationOcean of Thanks Box ( V.1)
Day 4 Craft Ocean of Thanks Box ( V.1) JUNIORS & PRIMARIES Materials Small corrugated cardboard pizza boxes, 1 per child Clear transparency sheets, 1 per child 7-in. paper dessert plates, 1 per child Chrome
More informationIntruder Alert. Nail the wood blocks together to form an L shape.
Intruder Alert Make your very own portable alarm system. Use it when you want to make sure your little brother or sister doesn t snoop in your room. The alarm has a component that begins the action, a
More informationResurrection Extra - Stand-up Bible Characters
Resurrection Extra - Stand-up Bible Characters Safety Tips: Keep scissors out of reach of children. Keep all glue caps, marker caps and other small items out of reach of children age 3 or under, as they
More informationCautionary and Warning Statement. How a Trebuchet Works. Materials Included. Items Required (not included) Building the Base.
Cautionary and Warning Statement This kit is designed and intended for educational purposes only. Use only under the direct supervision of an adult who has read and understood the instructions provided
More information3Position the hull of the ship as
Yamato: Step-by-step 25 The hull and stern deck c b d a b d c e e f a Rear frame b Stern deck x 2 c Stern deck x 2 d Side wall x 2 Wood glue Sandpaper (no. 400 grain) Craft knife Pliers d Side wall x 2
More informationBeautiful Bouquet. Designed by Heidi Pridemore. Page All Rights Reserved The Whimsical Workshop
O - 3/5/12 Designed by Heidi Pridemore #FR-032 Fabric Requirements: 1/3 yard of Green- for all 1/3 yard of Yellow- Daisy 1/3 yard of Orange- Daisy 1/4 yard of Pink- Poppy 1/4 yard of Yellow Print- Poppy
More informationLead Screw Upgrade. How to upgrade your ROBO R1 to the new Lead Screw Upgrade Pack. Written By: Harrison Team RoBo 3D
Lead Screw Upgrade How to upgrade your ROBO R1 to the new Lead Screw Upgrade Pack. Written By: Harrison Team RoBo 3D 2017 guide.robo3d.com Page 1 of 14 Step 1 Lead Screw Upgrade Begin by powering off and
More informationWEEKLY ACTIVITY GUIDES: ENERGY & ELECTRICITY
WEEKLY ACTIVITY GUIDES: ENERGY & ELECTRICITY This week, we ll be learning about electricity with hands-on experiences that show how energy works in the world around you. You can t see, smell or touch electricity,
More informationTHE PHANTOM SEMI Assembly Instructions Page 1.
THE PHANTOM SEMI Assembly Instructions Page 1. (Continued on next page...) THE PHANTOM SEMI Assembly Instructions Page 2. (Continued on next page...) THE PHANTOM SEMI Assembly Instructions Page 3. WHAT
More informationMakes Sense SCIENCE GRADE LEVEL KINDERGARTEN FIRST MATERIALS
MATERIALS FOR STUDENT: (one per student unless otherwise noted) FloraCraft Make It: Fun Foam Ball, 4" diameter Jar band (from a canning jar lid) (optional) Cardstock paper features (See FOR TEACHER below)
More information4" Round Fieldstone Tower
4" Round Fieldstone Tower This page contains instructions on how to use mold #72 to build the round fieldstone tower. You will have to cast the mold 18 times to build the tower. This round tower is slightly
More informationTorso and Ribs Looks good and is real easy to do.
http://www.home.earthlink.net/~tekvov/id24.html Torso and Ribs Looks good and is real easy to do. Please see our snot rag mache and Corpsology 101 pages for the finishing touches. And our Head and shoulders
More informationMylar Moon Boots. Supplies. Cardboard. Mylar blanket. Duct tape. Craft knife. Ruler. Pen/Pencil
Mylar Moon Boots 1. Design a custom box. Measure the length, width, and height of your foot and add an inch to each of these measurements.» Now draw a rectangle on your cardboard that has the new dimensions
More information(Moving) Clowns out of a cannon : Assembly Instructions
http://www.canon.com/c-park/ Before starting assembly : Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section
More informationMirrorcraft Project Especially for Dogs
Mirrorcraft Project Especially for Dogs DIY Customized Pet Mirror Make a mirror photo frame to Display your Pets Photo Irene Jacobs April 2007 Mirrorcraft is a fun craft to easily create you own customized
More informationSimple Machines. Contact the National Museum of the U.S. Navy for Field Trip and School Visit opportunities!
Simple Machines In this packet, we will be learning the basic physics behind simple machines! We are then going to practice these principles in easy and fun activities that can be done in the classroom
More informationLED Infinity Mirror Controller, 32 LEDs, Multiple Patterns.
http://wwwinstructablescom/id/led-infinity-mirror-controller-32-leds-multiple-/ Food Living Outside Play Technology Workshop LED Infinity Mirror Controller, 32 LEDs, Multiple Patterns by ChromationSystems
More informationGreyboard or chipboard sheets, (you can reuse cardboard packaging for this).
For this project you will need: Greyboard or chipboard sheets, (you can reuse cardboard packaging for this). Twine or cord Eyelets and eyelet setter Fabric Glue gun If you re using a patterned fabric choose
More informationTelecaster Wiring Kits Please Read All Instructions Before Beginning. Tools you will need: Soldering tips: Removing Current Wiring: Step 1. Step 2.
Telecaster Wiring Kits Please Read All Instructions Before Beginning. Tools you will need: Soldering Iron (35 watt preferably) Solder Wet Sponge Wire Clippers Wire Strippers 3/8 Drill Bit 5/32 Drill Bit
More informationActivAting OrigAmi SEt guidebook
Activating Origami SET GUIDEBOOK Welcome to the TEKNIKIO Activating Origami SET CONTENTS 4 YOUR MATERIALS 8 ORIGAMI PATTERNS 14 EXAMPLE ACTIVITIEs This is one in a series of sets. In this set you will
More informationEngineering Directive
Thing-a-ma-Jig Finishing To Finish a model means to apply paint and other decorations to complete the look of your model. Meaning to apply a finish. That is what we will discuss in this section. Applying
More informationExplorer Wiring Kit (assembled)
Explorer Wiring Kit (assembled) For Vintage, Firestorm & Standard Series Please Read All Instructions Before Beginning. Tools you will need: Soldering Iron (35 watt preferably) Solder Wet Sponge Wire Clippers
More informationDC FAN FAMILY TEAM-UP BAT JETPACK INSTRUCTIONS
DC FAN FAMILY TEAM-UP BAT JETPACK INSTRUCTIONS Everyone knows that Batman and his crime-fighting family can t fly, but they do have fun gadgets to use while protecting the innocent. Gear up your little
More informationtinycylon Assembly Instructions Contents Written by Dale Wheat Version August 2016 Visit dalewheat.com for the latest update!
tinycylon Assembly Instructions Written by Dale Wheat Version 2.1 10 August 2016 Visit dalewheat.com for the latest update! Contents Assembly Instructions...1 Contents...1 Introduction...2 Quick Start
More informationHappy Camper Book Fair Entrance Instructions
Happy Camper Book Fair Entrance Instructions Supplies*: Entrance wall directions: Roll of dark blue paper Roll of purple paper Roll of brown paper Roll of dark green paper Roll of bright green paper Roll
More informationby Michele Reyzer; photos by Mark Godfrey CARDBOARD BOX GUITAR
F R O M TR A SH 2 T O Y S by Michele Reyzer; photos by Mark Godfrey Season s Green-ings! Here are five Earth-friendly presents you can make for your friends and family. All you need are a few recycled
More information3Insert the second rod no. 4
Yamato: Step-by-step 37 The stern block and searchlight control towers a b c d e f Recommended tools and materials Wood glue Sandpaper (no. 800 grain) Metal file Putty Craft knife For metal: Super Glue
More informationDYI shelter enrichment items
DYI shelter enrichment items Toys out of paper towel or toilet paper rolls: TP ball: Cut four pieces of paper towel roll about ½ to ¾ inch thick. Then make into a ball by slipping them together making
More informationFast Tramp Freighter Lighting Kit
Fast Tramp Freighter Lighting Kit By Madman Lighting Inc Copyright April 2009, all rights reserved. WARNING: This product contains small parts not suitable for children less than 12 years of age. DO NOT
More information~MINI Scrapbooks~ By: Charlene Adair Hunter Of the Dating Divas Step 1) Make sure you have ALL the supplies you will need.
~MINI Scrapbooks~ By: Charlene Adair Hunter Of the Dating Divas Step 1) Make sure you have ALL the supplies you will need. Cutting For cutting you are welcome to use scissors and a ruler, I used a 12 paper
More informationConversation Can. Day 3. Materials. Tools and Basic Supplies. Pre-Prep. Teaching Tie-In ALL AGES. Handy Helps. Safari Science and Crafts 45
Handy Helps Day 3 Conversation Can ALL AGES Materials 10¾ oz. (empty) soup can, 1 per child Leopard print duct tape, one 9-in. piece per child Black cardstock, 1 sheet for every 2 children Tan construction
More informationCylon Raider Lighting Kit
Cylon Raider Lighting Kit By Madman Lighting Inc Copyright June 2015, all rights reserved. All trademarks property of their respective owners. WARNING: This product contains small parts not suitable for
More informationSolder Technique Studio Soldering Iron Fundamentals for the Mixed Media Artist
Solder Technique Studio Soldering Iron Fundamentals for the Mixed Media Artist Giuseppina Josie Cirincione north light books CreateMixedMedia.com Cincinnati, Ohio Materials Basic soldering tool kit Solder,
More informationDO-IT-YOURSELF DISNEY-INSPIRED GIFT WRAP DISNEY
DO-IT-YOURSELF DISNEY-INSPIRED GIFT WRAP YOU WILL NEED*: Printed templates Scissors Tape Glue Craft paper Various ribbon *Additional supplies may be needed for each version and are listed before Step 1.
More informationTHE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 1.
THE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 1. THE FLOATING CANDELABRA ASSEMBLY INSTRUCTIONS page 2. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick), a toothpick, a ruler, a needle and
More informationGrand piano : Assembly Instructions. Grand piano. [Assembly Instructions] : Eleven letter sheets. Scissors line. Cut in line.
Grand piano : Assembly Instructions PAGE 01 Lockbar Front lid Music desk Back lid Lock rail Bridge Strings Fallboard Frame Lid prop Heel Backbottom Leg Pedals Caster Grand piano [Assembly Instructions]
More informationHow to Make and Run Jeopardy! Fun Night
How to Make and Run Jeopardy! Fun Night Basic Idea: The program at http://www.mindfun.com/jeopardynight is designed to load and allow live play of a game with all the players in the same room being led
More informationThe Bigger Best1 Dollhouse Wiring Set
The Bigger Best1 Dollhouse Wiring Set the best quality products of what you need for wiring an 8-12 room house a Quickstart Guide Real Good Toys kit #7999 4/14 Begin with Confidence! 12 volt wiring systems
More information6 th to 12 th grade. 20 minutes prep, 30 minutes activity
Build a Water Bottle Membranophone 6 th to 12 th grade 20 minutes prep, 30 minutes activity A clean empty water bottle, any size (bottles with ridges are best) Scissors Latex, rubber, or vinyl gloves Rubber
More informationPressed Flowers. Materials: Directions: Pressed flowers Heavyweight paper Picture frame Craft glue Small paint brush Tweezers
Pressed Flowers Pressed flowers Heavyweight paper Picture frame Craft glue Small paint brush Tweezers 1. Pressed flowers can be purchased online or you can easily press them yourself. Begin by folding
More informationFryer's Trebuchet Paper Kits
Fryer's Trebuchet Paper Kits Things you will need 7 sheets of card approx. 0.3 mm or 0.01 inches thick 1 sheet of paper to print out to download. 2 x 6-7 mm dowel or pencils 1 paper clip String 6 cms (2.5
More informationCut first cork in half in the middle (the two pieces will serve for two horses). Cut 2 corks in half lengthwise for the four legs.
Christmas Cork Horse Supplies: 3 1/2 corks. 4 x 4 piece red bandanna material for bandanna (cut in half diagonally makes two bandannas). White/Black yarn for mane & tail. Two black push pins for eyes.
More informationAssembly Instructions for the 1.5 Watt Amplifier Kit
Assembly Instructions for the 1.5 Watt Amplifier Kit 1.) All of the small parts are attached to a sheet of paper indicating both their value and id. 2.) Leave the parts affixed to the paper until you are
More informationPump Assembly. Lloyd Matthews September 2013
Pump Assembly Lloyd Matthews September 2013 Before proceeding with this part of the build, the author recommends that Pt. No 227 1 mm diameter Brass Wire Figure H1, is replaced with 0.8 mm straight brass
More informationU-bass Kit Assembly Instructions
U-bass Kit Assembly Instructions Compiled by playubass.com This guide is built from the instructions found here: http://kalabrand.com/ubass-kit/index.html Tools Needed 5/8 (16 mm) Wrench 7/16 (~11 mm)
More informationJabiru Installation instructions
Page 1 of 5 s Step Description 1 Mark out centre line of the installation 2 Align centre line of installation with the centre line of the "Front Panel Cut out" template. Align "FLOOR" on template with
More informationHow To Make A Simple Circuit & Switch
How To Make A Simple Circuit & Switch Our video tutorial at www.artgonewild.com shows how to make a simple circuit & switch, which you can view at www.artgonewild.com. The sample card shown in the video
More informationLED Thin Frame Fixed Frame Screen User Guide
LED Thin Frame Fixed Frame Screen User Guide INTRODUCTION INTRODUCTION WARNING - Sharp Edges This product may contain sharp edges, please handle with care. Protective gloves are recommended. WARNING -
More informationHobby Lobby Zip Supplementary instructions Please refer to the included drawings while using these assembly instructions
Materials needed: 15 or 30 minute epoxy Medium CA Masking tape Scotch tape Servo Tape Wax paper Tools Needed: Pencil or marker Flat building surface Hobby knife or razor blade 7/64" or 3mm drill bit 3/16"
More informationInternet of Things Student STEM Project Jackson High School. Lesson 2: Arduino and LED
Internet of Things Student STEM Project Jackson High School Lesson 2: Arduino and LED Lesson 2: Arduino and LED Time to complete Lesson 60-minute class period Learning objectives Students learn about Arduino
More informationELECTRIC RACER BASIC BUILD
Page 1 Name: Set: Date: This guide will take you through the process of creating a basic electric racer. After you finish this build, you should be able to experiment, design and engineer your own racer.
More informationCountry Commandments Stitchery
Country Commandments Stitchery Notes 1. Read pattern through before starting. 2. Sewing Terms: RST-right sides together RSO right side(s) out 3. Thank you for purchasing my pattern! You may sell the finished
More informationValentine Boy. Pattern and Instructions. By Cutest Voodoo
Valentine Boy Pattern and Instructions By Cutest Voodoo Before we start... This pa ern is copyrighted by Cutest Voodoo. This is an original design and is made for personal use only. Mass produc on of this
More informationAUDI A8 D3 REPLACING THE OUTSIDE DRIVER DOOR HANDLE
AUDI A8 D3 REPLACING THE OUTSIDE DRIVER DOOR HANDLE The keyless entry system in the D3 is a great feature. If you have the car key fob in your pocket, putting your hand under the door handle will unlock
More informationMini Cooper Lock Actuator
2001-2006 Mini Cooper Lock Actuator Replacement This guide is on how to remove the lock actuator from the cars door. Written By: Jem ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION In order
More informationyouth groups and robotics teams
Group STEM activities for youth groups and robotics teams By Abby Fry Introduction... 3 A Note to High School STEM Organizations... 3 Binary Bracelets... 4 Pasta Rock... 5 Stylin Safety Glasses... 7 Electrifying
More informationActivity Instructions - Classroom Wind Farm
Wind Power - Classroom Wind Farm Activity Instructions - Classroom Wind Farm The purpose of this activity is for students to build their own windmill generator, which will then be one unit of the classroom
More informationAssembly Instructions
18' W x 10' H or 12' H Peak Style Frame Assembly Assembly Instructions Before you start: 2+ individuals recommended for assembly, approximate time 3 hours. Recommended tools: Power Drill, Safety Glasses,
More informationHubble Space Telescope Expert Model Interior Directions Downloads, patterns, and other information at:
Hubble Space Telescope Expert Model Interior Directions Downloads, patterns, and other information at: Materials: Construction tips: The patterns and instructions, which can be downloaded at. The pattern
More informationWaist Cincher Pattern. Sewing Instructions. Corset pattern by Linda Sparks of Farthingales
Waist Cincher Pattern Sewing Instructions Corset pattern by Linda Sparks of Farthingales CB CF The corset on the left was made using this pattern. There are four pieces for each side of the body Both top
More informationGetting started with the SparkFun Inventor's Kit for Google's Science Journal App
Page 1 of 16 Getting started with the SparkFun Inventor's Kit for Google's Science Journal App Introduction Google announced their Making & Science Initiative at the 2016 Bay Area Maker Faire. Making &
More information1 2 YEAR OLDS. Make baby s own photo album. What you need: Photos Cardboard
Introduction: Whatever the age of the children in your setting it can take very little time, effort or expense on your part to get those creative juices flowing! Cognitive and kinetic development can be
More informationCA to each one. You may have to hold the end down while to glue sets or use an accelerator like I did.
The following information and photographs are what I did to build the kit. Your methods and needs may differ from this which is fine. There is no right or wrong way if you are used to scratch building.
More informationExperiment 3 Ohm s Law
Experiment 3 Ohm s Law The goals of Experiment 3 are: To identify resistors based upon their color code. To construct a two-resistor circuit using proper wiring techniques. To measure the DC voltages and
More information14 : TRANSDUCERS I. INTRODUCTION II. FARADAY S LAW OF ELECTROMAGNETIC INDUCTION A. A SINGLE WIRE MOVING IN A MAGNETIC FIELD
14 : TRANSDUCERS I. INTRODUCTION Transduction is the changing of energy (or information) from one form to another. Microphones transduce acoustical energy into electrical energy (voltage); loudspeakers
More informationBleeding Control Prop for Tourniquet Practice Advanced Bleeding Control
Do It Yourself Bleeding Control Prop for Tourniquet Practice Advanced Bleeding Control Introduction Hands-on skill practice is necessary to developing competence in using commercial or improvised tourniquets.
More informationMax Launch Abort System Prod. No *Kevlar is a registered trademark of Dupont
Flying Model Parts List Max Launch Abort System Prod. No. 3014 A 11820 - Body Tube 3.5 Diam x 5.5" Long B 11824 - Orange Capsule Base Shoulder Ring C 16032 - Laser-cut Ring motor mount rear D 16033 - Laser-cut
More informationThe Hearse Carriage Assembly Instructions Page 1.
The Hearse Carriage Assembly Instructions Page 1. The Hearse Carriage Assembly Instructions Page 2. WHAT YOU'LL NEED: Scissors, Elmer's glue (or a glue stick), a needle, two toothpicks, a sharpened pencil,
More informationTrumpet : Assembly Instructions
A trumpet is a brass instrument which is played by blowing air into the mouthpiece and causing vibrations with the lips, while operating piston or rotary valves. A trumpet's shape and the length of its
More informationHow To Make A Static Grass Applicator
How To Make A Static Grass Applicator Complete information about making a static grass applicator. Some people use a rather complex procedure to make a static grass applicator. And others do it disarmingly
More informationStarship Lighting Kit
The BIG Starship Lighting Kit By Madman Lighting Inc Copyright June 2011, all rights reserved. WARNING: This product contains small parts not suitable for children less than 12 years of age. DO NOT SWALLOW!
More informationDIY DISNEY CHAR M BR ACELET
DIY CHAR M BR ACELET YOU WILL NEED: Polymer clay in various colors 5/32 Silver/Gold eyelets Sculpting tools Clay gloss varnish or polyurethane matte varnish* Paint brush Craft knife An oven and pan A ruler
More informationThe Useless Machine. DIY Soldering Edition. Instruction Guide v0004
The Useless Machine DIY Soldering Edition Instruction Guide v0004 TM For the best outcome, follow each step in order. We recommend reading this guide entirely before you get started. Tools required: Soldering
More informationComet Kit Tissue Guide
Comet Kit Tissue Guide This tutorial was originally a free handout to Comet Kit builders in the 30's, 40's and later. It is on The SAM site by virture of Jack Sugameli, who posted the original graphic
More informationNEXUS SERIES CABINETS
NEXUS SERIES CABINETS STANDARD BASE ASSEMBLY INSTRUCTIONS Also applies to: Galaxy Series, Nexus Series, Ridgeline Series, Statesman Series, and Waterford Series FOR YOUR INFORMATION: These assembly instructions
More informationVoltage Village - Glowing House Set - Bare ConductiveBare Conductive. Step-by-Step instructions to assemble your very own Voltage Village!
SEARCH CART NAV Voltage Village Glowing House Set Step-by-Step instructions to assemble your very own Voltage Village! INFORMATION SUGGESTED TUTORIALS In this tutorial we will show you how to assemble
More informationSMARTfit Functional and Brain Fitness Training Multi-Station Trainer Installation for Stud and Concrete Walls (US)
SMARTfit Functional and Brain Fitness Training Multi-Station Trainer Installation for Stud and Concrete Walls (US) 2017 SMARTfit, Inc. www.smartfitinc.com 1 Unlike other fitness equipment which may require
More informationRepair Instructions grand MA
Repair Instructions grand MA Grand MA 1 Repair Instructions grand MA The following tasks may be performed by qualified personnel only! By disregarding the instructions or the prescribed sequence of tasks
More informationHow to make a paper mache skull
http://www.spookyblue.com/halloween/skulls/paper mache skull.htm How to make a paper mache skull Materials List Resin skull from Anatomical Chart Company What?! Spend $25 on a skull? Hear me out. A good
More informationPrintable Tutorial: Exploding Box Mini Album
Printable Tutorial: Exploding Box Mini Album scrapgirls.com/all-posts/printable-tutorial-exploding-box-mini-album/ Digital scrapbooking supplies used: Spring is Here Collection Biggie ScrapSimple Craft
More informationAn Advent calendar of Christmas crafts 24 days of super quick and easy craft activities! Christingles are often made and lit during Advent.
24 days of super quick and easy craft activities! 1 Christingle an orange, a candle or glow stick, red ribbon, four toothpicks and sweets. Christingles are often made and lit during Advent. 2 a. The orange
More informationARMA-CHEK SILVER APPLICATION MANUAL. T. +49 (0)
ARMA-CHEK SILVER APPLICATION MANUAL T. +49 (0) 251 7603-0 info@armacell.com www.armacell.eu 02 Arma-Chek Silver Application Manual General application instructions Working with Arma-Chek Silver The installer
More informationClass #7 Fold out Photos
Class #7 Fold out Photos In this class we re going to make a fun page that holds five photos on the one page. We ll be using the washi tape for this although if you don t have any you can use regular household
More informationSky Eagle. User Guide. Cautionary and Warning Statements
Sky Eagle User Guide 60089 V0613 Cautionary and Warning Statements This kit is designed and intended for educational purposes only. Use only under the direct supervision of an adult who has read and understood
More information