CERTIFICATE. Issued Date: May. 21, 2012 Report No.: R-ITUSP01V01

Size: px

Start display at page:

Download "CERTIFICATE. Issued Date: May. 21, 2012 Report No.: R-ITUSP01V01"

Gabriella Lindsey
5 years ago
Views:

1 CERTIFICATE Issued Date: May. 21, 2012 Report No.: R-ITUSP01V01 This is to certify that the following designated product Product : Network Switch Trade name : Radware Model Number : APSolute Vision DC, Content Inspection Director (CID) DC, DefensePro DC, InFlight DC, On Demand Switch 3(RODS3-DEFDUDC), On Demand Switch 3 (RODS3-S1-DEFDUDC), On Demand Switch 3 (RODS3-S2-DEFDUDC), OnDemand Switch 3 DC, Virtual Director DC, AppDirector DC, AppWall DC, AppXcel DC, AppXMLDC, LinkProof DC, ODS3 DC, SIP Director DC, On Demand Switch 3 (RODS3-DEFAULT), On Demand Switch 3 (RODS3-S1-DEFAULT), On Demand Switch 3 (RODS3-S2-DEFAULT), ODS3, AppDirector, LinkProof, AppWall, AppXcel, AppXML, SIP Director, InFlight, Virtual Director, APSolute Vision, DefensePro, Content Inspection Director (CID), OnDemand Switch 3 Company Name : Radware Ltd. This product, which has been issued the test report listed as above in QuieTek Laboratory, is based on a single evaluation of one sample and confirmed to comply with the requirements of the following EMC standard. FCC CFR Title 47 Part 15 Subpart B: 2011 Class A, CISPR 22: 2008 ANSI C63.4: 2009 TEST LABORATORY Vincent Lin / Manager No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL: FAX: service@quietek.com

(RODS3-S2-DEFDUDC), OnDemand Switch 3 DC, Virtual Director DC, AppDirector DC, AppWall DC, AppXcel DC, AppXMLDC, LinkProof DC, ODS3 DC, SIP Director DC, On Demand Switch 3 (RODS3-DEFAULT), On Demand

Content Inspection Director (CID), OnDemand Switch 3 Applicant : Radware Ltd. Address : 22 Raoul Wallenberg St. Tel Aviv, lsrael 69710 Date of Receipt : 2012/04/13 Issued Date : 2012/05/21 Report No.

2 Test Report Product Name Model No. : Network Switch : APSolute Vision DC, Content Inspection Director (CID) DC, DefensePro DC, InFlight DC, On Demand Switch 3(RODS3-DEFDUDC), On Demand Switch 3 (RODS3-S1-DEFDUDC), On Demand Switch 3 (RODS3-S2-DEFDUDC), OnDemand Switch 3 DC, Virtual Director DC, AppDirector DC, AppWall DC, AppXcel DC, AppXMLDC, LinkProof DC, ODS3 DC, SIP Director DC, On Demand Switch 3 (RODS3-DEFAULT), On Demand Switch 3 (RODS3-S1-DEFAULT), On Demand Switch 3 (RODS3-S2-DEFAULT), ODS3, AppDirector, LinkProof, AppWall, AppXcel, AppXML, SIP Director, InFlight, Virtual Director, APSolute Vision, DefensePro, Content Inspection Director (CID), OnDemand Switch 3 Applicant : Radware Ltd. Address : 22 Raoul Wallenberg St. Tel Aviv, lsrael Date of Receipt : 2012/04/13 Issued Date : 2012/05/21 Report No. : R-ITUSP01V01 Report Version : V0.4-Draft The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Page: 1 of 46

DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.

3 DECLARATION OF CONFORMITY Per FCC Part 2 Section (a) The following equipment: Product Name : Network Switch Trade Name : Radware Model Number : APSolute Vision DC, Content Inspection Director (CID) DC, DefensePro DC, InFlight DC, On Demand Switch 3 (RODS3-DEFDUDC), On Demand Switch 3 (RODS3-S1-DEFDUDC), On Demand Switch 3 (RODS3-S2-DEFDUDC), OnDemand Switch 3 DC, Virtual Director DC, AppDirector DC, AppWall DC, AppXcel DC, AppXMLDC, LinkProof DC, ODS3 DC, SIP Director DC, On Demand Switch 3 (RODS3-DEFAULT), On Demand Switch 3 (RODS3-S1-DEFAULT), On Demand Switch 3 (RODS3-S2-DEFAULT), ODS3, AppDirector, LinkProof, AppWall, AppXcel, AppXML, SIP Director, InFlight, Virtual Director, APSolute Vision, DefensePro, Content Inspection Director (CID), OnDemand Switch 3 It s herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The result of electromagnetic emission has been evaluated by QuieTek EMC laboratory (NVLAP Lab. Code : ) and showed in the test report. ( Report No. : R-ITUSP01V01) It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. The following importer / manufacturer is responsible for this declaration: Company Name Company Address Telephone Facsimile : Person is responsible for marking this declaration: Name ( Full name ) Position / Title Date Legal Signature

Test Report Certification Issued Date : 2012/05/21 Report No. : 124320R-ITUSP01V01 Product Name : Network Switch Applicant : Radware Ltd. Address : 22 Raoul Wallenberg St.

4 Test Report Certification Issued Date : 2012/05/21 Report No. : R-ITUSP01V01 Product Name : Network Switch Applicant : Radware Ltd. Address : 22 Raoul Wallenberg St. Tel Aviv, lsrael Manufacturer : NEXCOM International Co., LTD Model No. : APSolute Vision DC, Content Inspection Director (CID) DC, DefensePro DC, InFlight DC, On Demand Switch 3 (RODS3-DEFDUDC), On Demand Switch 3 (RODS3-S1-DEFDUDC), On Demand Switch 3 (RODS3-S2-DEFDUDC), OnDemand Switch 3 DC, Virtual Director DC, AppDirector DC, AppWall DC, AppXcel DC, AppXMLDC, LinkProof DC, ODS3 DC, SIP Director DC, On Demand Switch 3 (RODS3-DEFAULT), On Demand Switch 3 (RODS3-S1-DEFAULT), On Demand Switch 3 (RODS3-S2-DEFAULT), ODS3, AppDirector, LinkProof, AppWall, AppXcel, AppXML, SIP Director, InFlight, Virtual Director, APSolute Vision, DefensePro, Content Inspection Director (CID), OnDemand Switch 3 EUT Rated Voltage : AC V, 47-63Hz;DC 36-72V EUT Test Voltage : DC 48V, AC 120V / 60Hz Trade Name : Radware Applicable Standard : FCC CFR Title 47 Part 15 Subpart B: 2011, Class A CISPR 22: 2008, ANSI C63.4: 2009 Test Result : Complied Performed Location : Quietek Corporation (Linkou Laboratory) No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL: / FAX: Documented By : ( Adm. Specialist / Joanne Lin ) Reviewed By : ( Assistant Engineer / JoJolee Jung ) Approved By : ( Manager / Vincent Lin ) Page: 2 of 46

Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories.

5 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025, EN and specified testing scopes: Taiwan R.O.C. : BSMI, NCC, TAF Norway : Nemko, DNV USA : FCC, NVLAP Japan : VCCI The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation s Web Site : The address and introduction of QuieTek Corporation s laboratories can be founded in our Web site : If you have any comments, Please don t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL: / FAX: service@quietek.com LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : / FAX : service@quietek.com Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : / FAX : service@quietek.com Page: 3 of 46

6 TABLE OF CONTENTS Description Page 1. General Information EUT Description Mode of Operation Tested System Details Configuration of Tested System EUT Exercise Software Technical Test Summary of Test Result List of Test Equipment Measurement Uncertainty Test Environment Conducted Emission Test Specification Test Setup Limit Test Procedure Test Result Test Photograph Radiated Emission Test Specification Test Setup Limit Test Procedure Test Result Test Photograph Attachment EUT Photograph Page: 4 of 46

7 1. General Information 1.1. EUT Description Product Name Trade Name Model No. Component CPU HDD LAN Card DDR-RAM Power Supply Network Switch Radware APSolute Vision DC, Content Inspection Director (CID) DC, DefensePro DC, InFlight DC, On Demand Switch 3 (RODS3-DEFDUDC), On Demand Switch 3 (RODS3-S1-DEFDUDC), On Demand Switch 3 (RODS3-S2-DEFDUDC), OnDemand Switch 3 DC, Virtual Director DC, AppDirector DC, AppWall DC, AppXcel DC, AppXMLDC, LinkProof DC, ODS3 DC, SIP Director DC, On Demand Switch 3 (RODS3-DEFAULT), On Demand Switch 3 (RODS3-S1-DEFAULT), On Demand Switch 3 (RODS3-S2-DEFAULT), ODS3, AppDirector, LinkProof, AppWall, AppXcel, AppXML, SIP Director, InFlight, Virtual Director, APSolute Vision, DefensePro, Content Inspection Director (CID), OnDemand Switch 3 AMD OS2381PCP4DGI CACYC AC 1115EPA9L53971D10125 AMD OS2381PCP4DGI CACYC AC 1115EPA9L53971D10040 Western Digital, WD2503ABY-OLWERA1 On Board Apacer, 2GB ECC REG PC CL6 AC:EMACS, MRW-3500V-R DC:EMACS, DMRW-3500V-R Note: The EUT is including thirty-two models for different marketing requirement. Page: 5 of 46

8 1.2. Mode of Operation QuieTek has verified the construction and function in typical operation. All the test modes were carried out with the EUT in normal operation, which was shown in this test report and defined as: Pre-Test Mode Mode 1: Normal Operation (AC IN) Mode 2: Normal Operation (DC 48V IN) Final Test Mode Emission Mode 1: Normal Operation (AC IN) Mode 2: Normal Operation (DC 48V IN) Page: 6 of 46

9 1.3. Tested System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord 1 USB Mouse Logitech M-U0003 LZ024HR N/A Page: 7 of 46

10 1.4. Configuration of Tested System Connection Diagram Signal Cable Type Signal cable Description A RS-232 Cable Shielded, 1.5m B USB Mouse Cable Shielded, 1.8m C Fiber Cable Non-Shielded, 0.33m, two PCS. D Fiber Cable Non-Shielded, 0.45m, two PCS. E LAN Cable Non-Shielded, 0.24m, five PCS. Page: 8 of 46

11 1.5. EUT Exercise Software 1 Setup the EUT and simulators as shown on Turn on the power of all equipment. 3 Personal Computer reads data from disk. 4 The EUT will start to operate and display the video figure from the signal source. 5 The EUT will display video figure on monitor. 6 Repeat the above procedure (4) Page: 9 of 46

12 2. Technical Test 2.1. Summary of Test Result No deviations from the test standards Deviations from the test standards as below description: Emission Performed Item Normative References Conducted Emission FCC CFR Title 47 Part 15 Subpart B: 2011 Class A, ANSI C63.4: 2009 Radiated Emission FCC CFR Title 47 Part 15 Subpart B: 2011 Class A, ANSI C63.4: 2009 Test Performed Yes Yes Deviation No No Page: 10 of 46

13 2.2. List of Test Equipment Conducted Emission / SR1 Instrument Manufacturer Type No. Serial No Cal. Date EMI Test Receiver R&S ESCS /11/15 LISN R&S ESH3-Z / /01/12 LISN R&S ENV /02/13 Pulse Limiter R&S ESH3-Z /09/16 Radiated Emission / Site5 Instrument Manufacturer Type No. Serial No Cal. Date Bilog Antenna Schaffner Chase CBL6112B /07/22 EMI Test Receiver R&S ESCS /03/27 Pre-Amplifier QTK N/A N/A 2011/07/01 Spectrum Analyzer Agilent E4411B MY /12/26 Site5 NSA QTK N/A N/A 2011/07/01 Radiated Emission / CB7 Instrument Manufacturer Type No. Serial No Cal. Date EMI Test Receiver Agilent E4440A MY /12/12 Horn Antenna ETS-Lindgren /03/30 Horn Antenna SCHWARZBECK 9120D /11/14 Pre-Amplifier QuieTek AP-180C CHM/ /07/12 CB7 VSWR QTK N/A N/A 2011/08/25 Page: 11 of 46

14 2.3. Measurement Uncertainty Conducted Emission The measurement uncertainty is evaluated as ± 2.26 db. Radiated Emission The measurement uncertainty is evaluated as ± 3.19 db. Page: 12 of 46

15 2.4. Test Environment Performed Item Items Required Actual Temperature ( C) Conducted Emission Humidity (%RH) Barometric pressure (mbar) Temperature ( C) Radiated Emission Humidity (%RH) Barometric pressure (mbar) Page: 13 of 46

3. Conducted Emission 3.1. Test Specification According to Standard : FCC Part 15 Subpart B, ANSI C63.4 3.2. Test Setup 3.3. Limit Limits Frequency (MHz) QP AV 0.

16 3. Conducted Emission 3.1. Test Specification According to Standard : FCC Part 15 Subpart B, ANSI C Test Setup 3.3. Limit Limits Frequency (MHz) QP AV Remarks: In the above table, the tighter limit applies at the band edges. Page: 14 of 46

17 3.4. Test Procedure The EUT and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50 ohm /50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refers to the block diagram of the test setup and photographs.) Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed on conducted measurement. Conducted emissions were invested over the frequency range from 0.15MHz to 30MHz using a receiver bandwidth of 9kHz. Page: 15 of 46

18 3.5. Test Result Site : SR1 Time : 2012/05/08-05:05 Limit : CISPR_A_00M_QP Margin : 10 EUT : Network Switch Probe : ENV_216_L1 - Line1 Power : AC 120V/60Hz Note : Mode 1 Page: 16 of 46

19 Site : SR1 Time : 2012/05/08-05:06 Limit : CISPR_A_00M_QP Margin : 0 EUT : Network Switch Probe : ENV_216_L1 - Line1 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) QUASIPEAK 2 * QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 17 of 46

Site : SR1 Time : 2012/05/08-05:06 Limit : CISPR_A_00M_AV Margin : 0 EUT : Network Switch Probe : ENV_216_L1 - Line1 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure

20 Site : SR1 Time : 2012/05/08-05:06 Limit : CISPR_A_00M_AV Margin : 0 EUT : Network Switch Probe : ENV_216_L1 - Line1 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) AVERAGE 2 * AVERAGE AVERAGE AVERAGE AVERAGE AVERAGE Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 18 of 46

21 Site : SR1 Time : 2012/05/08-05:07 Limit : CISPR_A_00M_QP Margin : 10 EUT : Network Switch Probe : ENV_216_N - Line2 Power : AC 120V/60Hz Note : Mode 1 Page: 19 of 46

22 Site : SR1 Time : 2012/05/08-05:07 Limit : CISPR_A_00M_QP Margin : 0 EUT : Network Switch Probe : ENV_216_N - Line2 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 * QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 20 of 46

23 Site : SR1 Time : 2012/05/08-05:07 Limit : CISPR_A_00M_AV Margin : 0 EUT : Network Switch Probe : ENV_216_N - Line2 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 * AVERAGE AVERAGE AVERAGE AVERAGE AVERAGE AVERAGE Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 21 of 46

24 Site : SR1 Time : 2012/05/09-16:53 Limit : CISPR_A_00M_QP Margin : 10 EUT : Network Switch Probe : 8226_176(+) - Line1 Power : DC 48V Note : Mode 2 Page: 22 of 46

25 Site : SR1 Time : 2012/05/09-16:55 Limit : CISPR_A_00M_QP Margin : 0 EUT : Network Switch Probe : 8226_176(+) - Line1 Power : DC 48V Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK 5 * QUASIPEAK QUASIPEAK Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 23 of 46

26 Site : SR1 Time : 2012/05/09-16:55 Limit : CISPR_A_00M_AV Margin : 0 EUT : Network Switch Probe : 8226_176(+) - Line1 Power : DC 48V Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 * AVERAGE AVERAGE AVERAGE AVERAGE AVERAGE AVERAGE Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 24 of 46

27 Site : SR1 Time : 2012/05/09-16:56 Limit : CISPR_A_00M_QP Margin : 10 EUT : Network Switch Probe : 8226_177(-) - Line1 Power : DC 48V Note : Mode 2 Page: 25 of 46

28 Site : SR1 Time : 2012/05/09-16:57 Limit : CISPR_A_00M_QP Margin : 0 EUT : Network Switch Probe : 8226_177(-) - Line1 Power : DC 48V Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK 5 * QUASIPEAK QUASIPEAK Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 26 of 46

Site : SR1 Time : 2012/05/09-16:57 Limit : CISPR_A_00M_AV Margin : 0 EUT : Network Switch Probe : 8226_177(-) - Line1 Power : DC 48V Note : Mode 2 Frequency Correct Factor Reading Level Measure Level

29 Site : SR1 Time : 2012/05/09-16:57 Limit : CISPR_A_00M_AV Margin : 0 EUT : Network Switch Probe : 8226_177(-) - Line1 Power : DC 48V Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 * AVERAGE AVERAGE AVERAGE AVERAGE AVERAGE AVERAGE Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 27 of 46

30 3.6. Test Photograph Test Mode : Mode 1: Normal Operation (AC IN) Description : Front View of Conducted Test Test Mode : Mode 1: Normal Operation (AC IN) Description : Back View of Conducted Test Page: 28 of 46

Description : Back View of Conducted Test Page:

31 Test Mode : Mode 2: Normal Operation (DC 48V IN) Description : Front View of Conducted Test Test Mode : Mode 2: Normal Operation (DC 48V IN) Description : Back View of Conducted Test Page: 29 of 46

: FCC Part 15 Subpart B, ANSI C63.4 4.2.

32 4. Radiated Emission 4.1. Test Specification According to EMC Standard : FCC Part 15 Subpart B, ANSI C Test Setup Under 1GHz Test Setup: Above 1GHz Test Setup: Page: 30 of 46

33 4.3. Limit Under 1GHz test shall not exceed the following value: Frequency (MHz) Limits Distance (m) dbuv/m Remark: 1. The tighter limit shall apply at the edge between two frequency bands. 2. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. Above 1GHz test shall not exceed the following value: FCC Part 15 Subpart B Paragraph Limits (dbuv/m) Frequency (MHz) Distance(m) dbuv/m Above Remark: 1. The tighter limit shall apply at the edge between two frequency bands. 2. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. 3. RF Voltage (dbuv/m) = 20 log RF Voltage (uv/m) Page: 31 of 46

34 4.4. Test Procedure The EUT and its simulators are placed on a turn table which is 0.8 meter above ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level and the antenna can move up and down between 1 meter and 4 meters to find out the maximum emission level. Both horizontal and vertical polarization of the antenna are set on measurement. In order to find the maximum emission, all of the interface cables must be manipulated on radiated measurement. For an unintentional radiator, including a digital device, the spectrum shall be investigated from the lowest radio frequency signal generated or used in the device, without going below the lowest frequency for which a radiated emission limit is specified, up to the frequency shown in the folowing table: Highest frequency generated or used in the device or on which the device operates or tunes (MHz) Upper frequency of measurement range (MHz) Below th harmonic of the highest Above 1000 frequency or 40 GHz, whichever is lower On any frequency or frequencies below or equal to 1000 MHz, the radiated limits shown are based on measuring equipment employing a quasi-peak detector function and above 1000 MHz, the radiated limits shown are based measuring equipment employing an average detector function. When average radiated emission measurement are included emission measurement Above 1000 MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20 db above the maximum permitted average limit. For class A, the measurement distance between the EUT and antenna is 10 meters for under 1GHz and above 1GHz. For class B, the measurement distance between the EUT and antenna is 10 meters for under 1GHz and 3 meters for above 1GHz. The bandwidth below 1GHz setting on the field strength meter (R&S Test Receiver ESCS 30) is 120 khz and above 1GHz is 1MHz. Page: 32 of 46

35 4.5. Test Result Site : Site5 Time : 2012/05/12-16:50 Limit : CISPR_A_10M_QP Margin : 6 EUT : Network Switch Probe : Site5_CBL6112_10M_ HORIZONTAL Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK 5 * QUASIPEAK QUASIPEAK QUASIPEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 33 of 46

Site : Site5 Time : 2012/05/12-16:36 Limit : CISPR_A_10M_QP Margin : 6 EUT : Network Switch Probe : Site5_CBL6112_10M_0726 - VERTICAL Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor

36 Site : Site5 Time : 2012/05/12-16:36 Limit : CISPR_A_10M_QP Margin : 6 EUT : Network Switch Probe : Site5_CBL6112_10M_ VERTICAL Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) QUASIPEAK 2 * QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 34 of 46

37 Site : Site5 Time : 2012/05/12-17:41 Limit : CISPR_A_10M_QP Margin : 6 EUT : Network Switch Probe : Site5_CBL6112_10M_ HORIZONTAL Power : DC 48V Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK 5 * QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 35 of 46

38 Site : Site5 Time : 2012/05/12-17:23 Limit : CISPR_A_10M_QP Margin : 6 EUT : Network Switch Probe : Site5_CBL6112_10M_ VERTICAL Power : DC 48V Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) QUASIPEAK QUASIPEAK 3 * QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK QUASIPEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 36 of 46

Site: CB7 Time: 2012/05/07-11:08 Limit: FCC_A_(Above_1G) Margin: 0 Probe: CB7_Horn_3117_1204 EUT: Network Switch Polarity: Horizontal Power: AC 120V/60Hz Note: Mode 1 Frequency Measure Level Reading

39 Site: CB7 Time: 2012/05/07-11:08 Limit: FCC_A_(Above_1G) Margin: 0 Probe: CB7_Horn_3117_1204 EUT: Network Switch Polarity: Horizontal Power: AC 120V/60Hz Note: Mode 1 Frequency Measure Level Reading Level Over Limit Limit Factor Type (MHz) (dbuv/m) (dbuv/m) 1 * PK PK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 37 of 46

40 Site: CB7 Time: 2012/05/07-11:09 Limit: FCC_A_(Above_1G) Margin: 0 Probe: CB7_Horn_3117_1204 EUT: Network Switch Polarity: Vertical Power: AC 120V/60Hz Note: Mode 1 Frequency Measure Level Reading Level Over Limit Limit Factor Type (MHz) (dbuv/m) (dbuv/m) 1 * PK PK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 38 of 46

41 Site: CB7 Time: 2012/05/07-11:40 Limit: FCC_A_(Above_1G) Margin: 0 Probe: CB7_Horn_3117_1204 EUT: Network Switch Polarity: Horizontal Power: DC 48V Note: Mode 2 Frequency Measure Level Reading Level Over Limit Limit Factor Type (MHz) (dbuv/m) (dbuv/m) 1 * PK PK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 39 of 46

42 Site: CB7 Time: 2012/05/07-11:41 Limit: FCC_A_(Above_1G) Margin: 0 Probe: CB7_Horn_3117_1204 EUT: Network Switch Polarity: Vertical Power: DC 48V Note: Mode 2 Frequency Measure Level Reading Level Over Limit Limit Factor Type (MHz) (dbuv/m) (dbuv/m) PK 2 * PK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 40 of 46

43 4.6. Test Photograph Test Mode : Mode 1: Normal Operation (AC IN) Description : Front View of Radiated Test Test Mode : Mode 1: Normal Operation (AC IN) Description : Back View of Radiated Test Page: 41 of 46

44 Test Mode : Mode 1: Normal Operation (AC IN) Description : Front View of High Frequency Radiated Test Test Mode : Mode 2: Normal Operation (DC 48V IN) Description : Front View of Radiated Test Page: 42 of 46

45 Test Mode : Mode 2: Normal Operation (DC 48V IN) Description : Back View of Radiated Test Test Mode : Mode 2: Normal Operation (DC 48V IN) Description : Front View of High Frequency Radiated Test Page: 43 of 46

46 5. Attachment EUT Photograph (1) EUT Photo (2) EUT Photo Page: 44 of 46

47 (3) EUT Photo (4) EUT Photo Page: 45 of 46

48 (5) EUT Photo (6) EUT Photo Page: 46 of 46

CERTIFICATE OF COMPLIANCE Page 1 of 1

CERTIFICATE OF COMPLIANCE Page 1 of 1 Certificate No.: K132102.00 Date of Issue: 30 January 2014 Applicant Name: RADWARE Ltd. Applicant Address 22 Raul Wallenberg St., Tel-Aviv, 61131, Israel Product Network