Model LBS Miniature Compression Load Button

Transcription

1 Model LBS Miniature Compression Load Button Why the Interface model LBS Miniature Compression Load Button is the best in class: Temperature compensated Integral load button Small diameter From." height Instrumentation ACCESSORIES Consult factory for more technical information Nonlinearity % FS...±0.50 Hysteresis % FS...±0.50 Nonrepeatability % RO...±0.10 Compensated Range F...60 to 160 Compensated Range C... to 71 Operating Range F to 5 Operating Range C to 107 Effect on Zero % RO/ F MAX...±0.005 Zero Balance % FS...± Rated Output mv/v (Nominal)...0 Bridge Resistance Ohm (Nominal)... Excitation Voltage...5 VDC Excitation Voltage MAX...7 VDC Calibration...Compression Deflection Safe Overload % CAP...0 Ultimate Overload % of CAP Cable length ft conductor Teflon insulated cable with temperature compensation board Drawing CAPACITY (lbf) LBS Series 5, 10, 5, , , 1K inch mm inch mm inch mm INTERFACE 7401 E. Butherus Drive, Scottsdale, AZ 8560 PHONE: (480) FAX: (480) ORDER TOLL-FREE LBS_55 03/13/09

2 Model LBM Compression Load Button Capacities from 5 to 50K lbf Temperature compensated Integral load button Small diameter Environmentally sealed Stainless steel ACCESSORIES Instrumentation Consult factory for more technical information. Nonlinearity % FS Hysteresis % FS Nonrepeatability % RO Compensated Range F Compensated Range C Operating Range F Operating Range C Effect on Zero % RO/ F MAX Effect on Output %/ F MAX Zero Balance % FS Rated Output mv/v (nominal) Bridge Resistance Ohm (nominal) Excitation Voltage Max Calibration Deflection Safe Overload % CAP Ultimate Overload % of CAP Cable Length ft 4 conductor Teflon insulated cable ±0.5 ±0.3 ± to to to to 93 ±0.005 ±0.005 ±.0 10 VDC Comp LBM 3/10/17 Drawing CAPACITY (lbf) LBM Series 5K, 10K 0K 50K 5, 50, , 500, 1K, K inch mm inch mm inch mm inch mm inch mm (1) () (3) (4) (5) 4-40 UNC 6-3 UNC 6-3 UNC 6-3 UNC 6-3 UNC (6) (7) Interface Inc East Butherus Drive Scottsdale, Arizona 8560 USA Phone: Fax: contact@interfaceforce.com ORDER TOLL-FREE

3 Dimensions Model LBMU Model LBMU High Accuracy Compression Load Button Capacities from 100-1K lbf Temperature Compensated Superior to Any Other Load Button Stainless Steel Enhanced Eccentric Load Rejection Low Power No Other Load Button In the World Can Meet or Beat This Accuracy! Specifications Spherical Radius Model Capacity LBMU US (lbf) 100, 50, 500, 1K Metric (kn).45, 1.10,.0, 4.45 Model S.S. Spring Strain Relief LBMU 5 ft. (1.5m) US (Inch) Metric (mm) Capacity.45, 1.10,.0, & 100, 50, 500, & 1K lbf 4.45 kn Accuracy -(Max Error) Nonlinearity -%FS ±0. Hysteresis -%FS ±0. Nonrepeatability -%RO ±0.05 Temperature Compensated Range - F 70 to 170 Compensated Range - C 0 to 75 Operating Range - F -65 to 00 Operating Range - C -55 to 90 Effect On Zero -%RO/ F -Max ±0.005 Effect on Output -%/ F -Max ±0.00 Zero Balance -%FS ± Electrical Rated Output -mv/v (Nominal).0 Bridge Resistance -Ω (Nominal) 700 Excitational Voltage 5VDC Mechanical Safe Overload -% CAP 0 Calibration Compression Ultimate Overload -% CAP 300 Deflection -in Cable Length -ft 5 Cable Type 4-Conductor Specifications are subject to change without notice. Custom Sizes and Capacities Available East Butherus Drive Scottsdale, Arizona 8560 USA Phone: Toll-Free: contact@interfaceforce.com 0 Interface Inc. IFF00007 RevC 06/

4 Sample System Overview Model LBMU Analog or Digital Inline Amplifier Display Handheld Display SGA CSC DMA CSD OEM Low Cost PC Interface Graphing & Logging Software 65V-MULTI 9860 INF-USB User Supplied Data Acquisition Chart Recorder PLC Wiring Diagram Ordering Information LBMU - xxx - xxx Factory Assigned Option Codes for Custom/ Special Configurations Capacity Rating (in lbf) [100, 50, 500, 1K] Model 7401 East Butherus Drive Scottsdale, Arizona 8560 USA Phone: Toll-Free: contact@interfaceforce.com 0 Interface Inc. IFF00007 RevC 06/

5 LBMP Overload LWMH Protected Thru-Hole Compression Load CellLoad Button LOADING OPTIONS DIAGRAM OPTIONS Extended Temperature Range Extended Temperature Range (-40 C Internal to +0 C) Shunt Resistor 100% output Internal Standardized Shunt Output Resistor 100% output Internal Shunt Resistor 100% output Standardized Output Standarized Output Extended Temperature Range (-40 C to +0 C) LOADING DIAGRAM Capacities from 0.01 kn kn to to kn kn Ideal Overload for determining protected bolt preload Extremely Temperature flat compensated and robust design Small diameter Environmentally sealed Stainless steel Nonlinearity %FS ±1% Hysteresis %FS ±1% Nonrepeatability %RO ±0.3% Creep, in 30 mon % ±0.1% ACCURACY (MAX ERROR) Effect Nonlinearity on Zero %FS %RO/ºC ±0.03% ±0.5 Effect Hysteresis on Output %FS %RO/ºC ±0.03% ±0.5 Compensated Non-repeatability Range %RO ºC 0 ±0. to +60 Operating Creep, in 30 Range min % ºC -10 ±0.1 to +70 Output Effect on mv/v Zero %RO/ºC 1 ±0.0 ±0% Excitation Effect on Output Voltage %RO/ºC VDC ±0.0 - Bridge Compensated Resistance Range Ohm ºC 0 to +60 Electrical Operating Connection Range ºC 3-meter -10 to +70 cable Safe Output Overload mv/v %RO (0.01 kn) 0.50 ± 0% Deflection at Rated Capacity (0.0 mm- 100 kn) 1 ± < 0% 0.1 Cyclic Excitation Load Voltage Rating VDC %RO ( kn) ±70 - Peak 6 IP Rating ( kn) IP65 - Material Bridge Resistance Ohm Stainless Steel Electrical Connection 3-meter cable Safe Overload %CAP ( kn) ( kn) Deflection at Rated Capacity mm Cyclic Load Rating %RO IP Rating ( kn) ( kn) Material < 0. ±70 Peak IP60 IP65 Stainless Steel 1700 LBMP Measuring range [kn] 0.01 / 0.0 / 0.05 / 0.1 / 0. / 0.5 / 1 / / 5 / ØA ØB ØC ØD ØE H K L M N O P M.5 M M3 M M4 M M5 M /3/ East Butherus Drive Scottsdale, Arizona 8560 USA Phone: Fax: contact@interfaceforce.com ORDER TOLL-FREE Page Page 1 of of

6 LBMP Overload Protected Compression Load Button Nominal Force Screw Ø A Ø (continued) B Ø D Ø E H S M M M10 LBMP with Overload 10.3 protection M M16 M ØA ± M ØB 0 ± 500 M M36 M39 M4 M48 M Spherical H ±0. D ±0. P Ø4. Cable Ø3. ±0.1 ØE All dimensions in mm N (O depth) (3x0 ) 7401 East Butherus Drive Scottsdale, Arizona 8560 USA Phone: Fax: contact@interfaceforce.com ORDER TOLL-FREE Page of

7 MSC Small Diameter High Capacity Load Button Proprietary Interface temperature compensated strain gages Small compact design Environmentally sealed Stainless steel construction Low deflection STANDARD CONFIGURATION 5 ft. Integral Cable Extra Cable Length Instrumentation OPTIONS ACCESSORIES Nonlinearlity % FS ±0.5 Hysteresis % FS ±0.5 Nonrepeatability % RO ±0.10 Creep, in 0 min % ±0. Compensated Range F 40 to 140 Compensated Range C 5 to 60 Operating Range F -40 to 175 Operating Range C -40 to 80 Effect on Output %/ F MAX ±0. Effect on Output %/ C MAX ±0.005 Effect on Zero % RO/ F MAX ±0.5 Effect on Zero % RO/ C MAX ±0.00 Rated Output mv/v (Nominal) +40%/-0% Zero Balance % RO ± Bridge Resistance Ohm (Nominal) +50/-3.5 Excitation Voltage MAX VDC Insulation Resistance Megohm 5000 Calibration Compression Safe Overload - % CAP 0 Cable length ft 5 CAPACITY U.S. (lbf) Metric (N) Drawing K, 0K, 30K 65K, 90K, 130K inch mm (1) () (3) R 4.0 ± ±13 (4) (5) (6) (7) (8).5 ±0.1.3 MSC 09/4/13 Interface Inc East Butherus Drive Scottsdale, Arizona 8560 USA Phone: Fax: contact@interfaceforce.com ORDER TOLL-FREE