C9C. Force Transducer. Special features. Data sheet
|
|
- Osborn Cameron
- 5 years ago
- Views:
Transcription
1 C9C Force Transducer Special features - Compact design compressive force transducer - Accuracy class Nominal (rated) forces 50 N to 50 kn - Configurable with different cable lengths, plug assembly and TEDS on request - Made of rustless materials - High rigidity, particularly suited for dynamic measurement tasks Data sheet Principle of the C9C force transducer Load application Cable Ø m long Screw connection
2 Dimensions of the C9C 120 Dimensions in mm (1 mm = inches) Y Mounting holes for C9C/ N 15 X Mounting holes for C9C/50 kn ø G T U R Cable ø m long 3 x 120 J B H A min. bending radius R10 Mounting holes for C9C/ kn Nominal (rated) A -0.1 B G +/-0.1 H J R T U -0.1 X Y force of C9C [mm] 50 N N x M kn - 20 kn x M kn x M C9C cable diagram 1: White, measurement signal (+) 2: Black, excitation voltage ( ) 4: Red, measurement signal ( ) 3: Blue, excitation voltage (+) Cable shield, connected to the housing HBM 2
3 Dimensions of the ED09 Centering Ø A +0.1 øb -0.1 E C D Dimensions in mm (1 mm = inches) 18 EDO9 Force range ø A ø B C D E F order number [mm] 1-EDO9/20kN kn EDO9/50kN from 50 kn HBM
4 Specifications Nominal (rated) force F nom N Accuracy kn Accuracy class 0.2 Relative reproducibility and b rg % < 0.2 repeatability errors without rotation Relative reversibility error v % < 0.2 Non linearity d lin % < 0.2 Relative creep d crf+e % < 0.2 < 0.1 Effect of temperature on sensitivity in the nominal (rated) temperature TK C % / 10 K < 0.2 range in the operating temperature range TK C % / 10 K < 0.50 Effect of temperature on the zero signal in the nominal (rated) temperature TK 0 % / 10 K < 0.2 range in the operating temperature range TK 0 % / 10 K < 0.50 Electrical characteristics Nominal (rated) sensitivity C nom mv/v 1 Relative zero signal error d s,0 mv/v ± 0.2 Sensitivity error d c % < 1 Input resistance R i Ω Output resistance R o Ω Insulation resistance R is Ω > 1*10 9 Operating range of the excitation B u,gt V voltage Reference excitation voltage U ref V 5 Connection 4 wire circuit Temperature Reference temperature t.ref C 23 Nominal (rated) temperature range B t,nom C 10 to +70 Operating temperature range B t,g C 30 to +85 Storage temperature range B t,s C 30 to +85 Characteristic mechanical quantities Max. operating force F G % of F nom Limit force F L % of F nom > 200 > 150 Breaking force F B % of F nom > 400 Permissible eccentricity when e g mm loading with nominal (rated) force Nominal (rated) displacement +/ 15% S nom mm Fundamental resonance frequency f G khz Relative permissible oscillatory F rb % of F nom stress General information Degree of protection per EN IP67 Spring element material Steel Measuring point protection Hermetically welded HBM 4
5 Nominal (rated) force N F nom kn Cables Four wire circuit, PUR insulation Cable length m 1.5 m; 3 m; 5 m; 6 m; 7 m; 12 m Weight g Versions and order numbers Code Measuring range Order number N 1 C9C/50N N 1 C9C/100N N 1 C9C/200N 00K5 0.5 kn 1 C9C/0.5KN 01k0 1 kn 1 C9C/1KN 02k0 2 kn 1 C9C/2kN 05k0 5 kn 1 C9C/5kN 10k0 10 kn 1 C9C/10kN 20k0 20 kn 1 C9C/20KN 50k0 50 kn 1 C9C/50KN The order numbers shown in gray are preferred types, they can be delivered rapidly. All force transducers with 1.5 m cable, open ends and without TEDS. The order no. for the preferred types is 1 C9C The order no. for customer specific designs is K C9C The order number example K-C9C-05k0-12m0-F-T shown further below refers to a: C9C, 5 kn nominal (rated) force with 12 m cable, 15 pin Sub D connector and TEDS Cable length Plug version Transducer identification 1.5 m 01m5 3 m 03m0 5 m 05m0 6 m 06m0 7 m 07m0 12 m 12m0 Free ends Y 15 pin Sub D connector F MS3106PEMV connector N 15 pin Sub HD connector Q With TEDS T Without TEDS S K C9C 05k0 12m0 F T All cable lengths can be combined with all plugs. TEDS can only be ordered in conjunction with a plug option. It is not possible to combine TEDS and free cable ends. 5 HBM
6 Subject to modifications. All product descriptions are for general information only. They are not to be understood as a guarantee of quality or durability. measure HBM and predict with confidence 6 Hottinger Baldwin Messtechnik GmbH Im Tiefen See Darmstadt Germany Tel Fax info@hbm.com
U9C. Data sheet. Force Transducer. Special features. B en
U9C Force Transducer Data sheet Special features Tensile/compressive force transducer Accuracy class 0.2 Nominal (rated) forces 50 N 50 KN Non-rusting, protection class IP67 Configurable with different
More informationS9M. Force Transducer. Special features. Data sheet
S9 Force Transducer Special features - Tensile/compressive force transducer - ccuracy class 0.02 - Hermetically encapsulated (IP68) - Rust-resistant materials - vailable in different cable lengths and
More informationU2B. Force Transducer. Special features. Data sheet
U2B Force Transducer Special features - Tensile/compressive force transducer - Non rusting, degree of protection IP67 - Can be configured with different cable lengths, plug fitting and TEDS on request
More informationU2B. Data sheet. Force Transducer. Special features. B en
U2B Force Transducer Special features Data sheet Tensile/compressive force transducer Non-rusting, degree of protection IP67 Can be configured with different cable lengths, plug fitting and TEDS on request
More informationU15. Force transducer. Special features. Data sheet. Installed dimensions of connection variants
U15 Force transducer Special features - Tensile/compressive force transducer - Nominal (rated) forces 2.5 kn to 2.5 MN - lass 0.5 to ISO 376 in force measurement range between 10% and 100% of the nominal
More informationC10. Data sheet. Force transducer. Special features. B de
C10 Force transducer Data sheet Special features Force transducer for static and dynamic applications Made of non-rusting materials Precise (accuracy class from 0.03) Numerous options (double bridge, TEDS,
More informationU10M. Force Transducer. Special features. Data sheet. Mounting dimensions of the connection variants in mm [inch]
U10M Force Transducer Special features - Precise and robust tensile/compressive force transducer for static and dynamic measurement tasks - High lateral force and bending moment stability, the effect of
More informationInductive Standard Displacement Transducers
WA Inductive Standard Displacement Transducers Special features - Available as displacement probe or with detachable plunger - Good thermal stability in the event of temperature gradients - Space saving,
More informationSingle point load cell
PW15AH Single point load cell Special features - Nominal load 10 kg... 100 kg - Stainless steel - High ratio of minimum verification interval Y - Industrial Footprint (SP4M) - Degree of Protection IP68;
More informationLoad cell. Special features. Data sheet
Z6R Load cell Special features - Nominal (rated) loads: 20 kg 200 kg - Welded-on robust cover - Load cells made of rust-resistant materials - Easy to clean - Same dimensions like Z6F - Verifiable up to
More informationT40FH. Torque flange. Special features. Data sheet
T40FH Torque flange Special features - Nominal (rated) torques: 100kNm, 125kNm, 150kNm, 200kNm, 250kNm, 300kNm - Nominal (rated) rotational speed of 2000 rpm up to 3000 rpm - Compact design - Version for
More informationSingle point load cell
PW15AH Single point load cell Special features - Nominal load 10 kg... 100 kg - Stainless steel - High ratio of minimum verification interval Y - Industrial Footprint (SP4M) - Degree of Protection IP68;
More information100/200/400 t. Self-centering pendulum lead cells. Data sheet. Special features
C16A 100/200/400 t Self-centering pendulum lead cells Special features - Self restoring function - Nominal (rated) loads: 100 t, 200t and 400t - Simple installation - Rust resistant materials, laser welded,
More informationData Sheet. Absolute pressure transducer Nominal (rated) pressure 10 bar to 3000 bar. Special features
P3 Top Class P3MB version with fixed cable P3MBP version with plug connection TEDS: Transducer Electronic Data Sheet P3 Absolute pressure transducer Nominal (rated) pressure 10 bar to 3000 bar Special
More informationData sheet. P3 Top Class BlueLine. P3MBP BlueLine. Ultra-high pressure transducers to 15,000 bar. Special features
Ultra-high pressure transducers to 1,000 bar Data sheet Special features P Top Class BlueLine PMBP BlueLine - For static and dynamic pressure variance, pressure peaks and pressure fluctuations - Principle
More informationT22. Torque transducer. Special features. Data sheet
T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring
More informationE *) F 15. H 12 h9. 5.5f7 8h6. a./f approx. 0.5mm Free stroke. Displacement. Initial stroke
Displacement probe Plunger WA Inductive Standard Displacement Transducers Special features Displacement probe and transducer with detachable plunger Good thermal stability in the event of temperature gradients
More informationRSCC. Data Sheet. Load cells. Special features. Diagram of RSCC load cell. Design: 500 kg to 5 t. Design: 50 kg to 200 kg. B
RSCC Load cells Data Sheet Special features - Load cell with SG measurement system - aximum capacities: 50 kg to 5 t - Hermetically sealed (IP68) - Rust resistant materials - Legal for trade to 3000 divisions,
More informationT10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en
T10FS Torque Flange Data Sheet Special features Nominal (rated) torques: 100 NVm, 200 NVm, 500 NVm, 1 knvm, 2 knvm, 3 knvm, 5 knvm, 10 knvm Nominal speed from 12,000 rpm to 24,000 rpm Low rotor weights
More informationT40B. Torque Flange. Special features. Data sheet. Overall concept
T40B Torque Flange Special features - Nominal (rated) torques 50 N m, 0 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and kn m - Nominal rated rotational speed up to 24000 rpm (depending on nominal
More informationT10F. Data Sheet. Torque Flange. Special features. Installation example T10F. B en
T10F Torque Flange Data Sheet Special features Extremely short design High permissible dynamic loads High permissible transverse forces and bending moments Very high torsional stiffness Contactless Selectable
More informationOperating manual. Force transducer with strain gage measuring system C9B. A en. hvordan man bruger astrologi med tibetanske medicin
Operating manual Force transducer with strain gage measuring system C9B hvordan man bruger astrologi med tibetanske medicin C9B Contents 3 Page Safety instructions..............................................
More informationT40FM. Data Sheet. Torque flange. Special features. Overall concept. B en
T40FM Torque flange Special features Data Sheet - Nominal (rated) torque: 15 kn m, 20 kn m, 25 kn m, 30 kn m, 40 kn m, 50 kn m, 60 kn m, 70 kn m and 80 kn m - Nominal (rated) rotational speed up to 8000
More informationSpecifications Type WA2 WA10 WA20 WA50 WA100 WA200 WA300 WA500 Nominal displacement mm Nomi
Displacement probe WA Inductive Standard Displacement Transducers Special features Data Sheet Plunger Displacement probe and transducer with detachable plunger Good thermal stability in the event of temperature
More informationT22. Data Sheet. Torque transducer. Special features. Installation example with two bellows couplings. B en
T22 Torque transducer Data Sheet Special features - Nominal (rated) torques N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m, 00 N m and 1 kn m - Nominal (rated) rotational speeds of 9000 rpm to 16 000 rpm
More informationMX1601B R. Data Sheet. Ultra-rugged Standard Amplifier
MX1601B R Ultra-rugged Standard Amplifier Data Sheet Special features 16 individually configurable inputs (electrically isolated) Support of 60 V, 10 V, 100 mv, 20 ma or IEPE on all channels Sample rate:
More informationZ6... Data Sheet. Load cell. Special features. Dimensions (in mm; 1 mm = inches) B en 1
Z6... Load cell ata Sheet Special features - Welded on metal bellows - Nominal (rated) loads: 5 kg 1 t - Load cells and installation aids made of rust resistant materials - Verifiable up to 6000 parts,
More informationMX1601B-R. Ultra rugged Standard Amplifier. Data sheet. Special features. Block diagram
MX1601B-R Ultra rugged Standard Amplifier Special features - 16 individually configurable inputs (electrically isolated) - Support of 60 V, 10 V, 100 mv, 20 ma or IEPE on all channels - Sample rate: up
More informationMX460B-R. Rugged pulse and frequency measuring module. Data sheet. Special features. Block diagram
MX460B-R Rugged pulse and frequency measuring module Special features - Four individually configurable inputs (electrically isolated) - Measure any kind of digital signals up to 1 Mhz for measurement of
More informationMX1615B R. Data Sheet. Ultra-rugged Bridge Amplifier
MX1615B R Ultra-rugged Bridge Amplifier Data Sheet Special features 16 individually configurable inputs Connection of strain gages in quarter-, half- or full-bridge Bridge excitation: DC or carrier frequency
More informationZ6... Data sheet. Load cell. Special features. Dimensions (in mm; 1 mm = inches) B en HBM: public 1
Z6... Load cell ata sheet Special features Welded-on metal bellows (rated) loads: 5 kg 1 t Load cells and installation aids made of rust-resistant materials Verifiable up to 6000 divisions, test report
More informationTB2. Torque reference transducer. Special features. Data sheet
T2 Torque reference transducer pecial features tandard version - ccuracy class 0.03 - ominal (rated) s 100 m, 200 m, 500 m, 1 k m, 2 k m, 3 k m, 5 k m and 10 k m - High permissible oscillation width -
More informationMDEX. on customized sensors. Technical information. Torque transducer. CS-T-04-MDEX Special features
MDEX Torque transducer CS-T-04-MDEX Special features - Explosion proof acc. to ATEX 95 - Exx II 2 G Ex deq IIC T4 - Nominal (rates) torque of 100kNm, 130kNm and 150kNm - HBM Accuracy Class 0,1 - Digital
More informationMX840B R. Data sheet. Ultra-rugged universal amplifier CAN. Special features. Block diagram. B en
MX840B R Ultra-rugged universal amplifier Data sheet Special features 8 individually configurable inputs (electrically isolated) Connection of more than 16 technologies per channel Sampling rates of up
More informationBenefits/Application. Class 00 according to ISO 376 in the range 10 % to 100 % Especially to trace back Force Standard Machines
Data sheet Force transfer standard Series KTN-Z/D (5 N 1000 kn) Benefits/Application Class 00 according to ISO 376 in the range 10 % to 100 % For static tensile and compressive forces Especially to trace
More informationMX1615B-R. Ultra-rugged Bridge Amplifier. Special features. Data sheet. Block diagram
MX1615B-R Ultra-rugged Bridge Amplifier Special features - 16 individually configurable inputs - Connection of strain gages in half-, full- or quarter-bridge (120 Ohm or 350 Ohm) - Bridge excitation: DC
More informationMX1615. Data sheet. Bridge/strain gauge amplifier
MX1615 Bridge/strain gauge amplifier Data sheet Special features 16 individually configurable inputs Connection of strain gauges in quarter-, half- and full-bridge Bridge excitation : DC or carrier frequency
More informationSUNSTAR 传感与控制
SUNSTAR 传感与控制 http://www.sensor-ic.com/ HBM Mess- und Systemtechnik GmbH Electrical measurement of mechanical quantities Operating manual Force transducer with strain gauge measuring system C9B B 20.C9B.20
More informationelectronics Data Sheet Industrial Amplifier Special features Dimensions (in mm; 1 mm= inches) B en
C l i p electronics Industrial Amplifier Data Sheet Special features Amplifier and additional units for strain gauge full bridges and inductive half and full bridges Modules for mounting onto support rails
More informationPW6C. Single point load cells. Special features. Data sheet
PW6C Single point load cells Special features - Max. capacities: kg... 40 kg - Aluminum - Accuracy class CMR & C6 - Off center load compensated - Shielded connection cable - Different cable lengths and
More informationMX1601B. Data Sheet. Universal amplifier. Special features. Block diagram Digital platform. B en
MX1601B Universal amplifier Data Sheet Special features 16 individually configurable inputs (electrically isolated) Connection of of standard signals (60, 10, 100 m, 20 ma, IEPE) Individual data rates
More informationTerms and expressions for specifying torque transducers
Terms and expressions for specifying torque transducers Terms and expressions for specifying torque transducers Metrological properties of the torque measuring system Accuracy class The accuracy class
More informationMX440A. Data Sheet. Universal amplifier. Special features. Block diagram Digital platform. B en
MX440A Universal amplifier Data Sheet Special features 4 individually configurable inputs (electrically isolated) Connection of more than 12 transducers technologies Data rate: up to 19,200 Hz 24 bit A/D
More informationCANHEAD. Data Sheet. Special features. Distributed measurement acquisition. B en
CANHEAD Data Sheet Special features 10channel amplifier modules for installation close to measuring points Measured data transmission to communication master via field bus Base modules for individual SGs,
More informationT12. Data sheet. Digital Torque Transducer. Special features. Signal flow block diagram. B en
T12 Digital Torque Transducer Data sheet Special features Nominal (rated) torques 100 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and 10 kn m Nominal (rated) rotational speeds from 10 000 rpm
More informationInstallation Guide. English. FS62 Surface Mountable Strain Sensor
Installation Guide English FS62 Surface Mountable Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com
More informationInstallation Guide. English. FS62 Embedded Strain Sensor
Installation Guide English FS62 Embedded Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com HBM FiberSensing,
More informationMX1616B. Strain gauge bridge amplifier. Special features. Data sheet. Block diagram
MX1616B Strain gauge bridge amplifier Special features - 16 individually configurable inputs - Connection of strain gauges in full-, halfand quarter-bridge (350 or 1,000 Ohm) - Bridge excitation : DC or
More informationModel 3A Series 3-Axis Load Cell
Model 3A Series 3-Axis Load Cell 3-Axis Fx Fy Fz; Independent Bridges 20N to 500kN Force Range Compact Size Low Crosstalk Temperature Compensated Accessories Model 3A60A BSC4A 4-Channel Analog Amplifier
More informationModel 3A Series 3-Axis Load Cell
Model 3A Series 3-Axis Load Cell 3-Axis Fx Fy Fz; Independent Bridges 20N to 500kN Force Range Compact Size Low Crosstalk Temperature Compensated Accessories BSC4A 4-Channel Analog Amplifier BSC4D 4-Channel
More informationABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. 9QGPS2000S Hermetically sealed bending beam load cell
BB ME SURE ME NT & N L YT ICS D T SHE ET 9QGPS2000S Hermetically sealed bending beam load cell 2 Measurement made easy High-end load cell combining high accuracy with high resistance in harsh environment.
More informationTension/compression force transducer. With thin film technology up to 100 kn. Models F2301, F23C1, F23S1. Force. Applications.
Force Tension/compression force transducer With thin film technology up to 100 kn Models F2301, F23C1, F23S1 tecsis data sheet FO 51.17 Applications Crane systems and hoists Industrial weighing technology
More informationInstallation Guide. English. FS62 Weldable Strain Sensor
Installation Guide English FS62 Weldable Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com HBM FiberSensing,
More informationMultipoint measuring units UPM100 and Centipede100
OTTINGER ALDWIN ESSTECHNIK HBM Mess- und Systemtechnik GmbH Multipoint measuring units UPM100 and Centipede100 S 33.UPM100.10 e Multipoint measuring units UPM100 and Centipede100 HBM s multipoint measurement
More informationMX1615B. Data sheet. Bridge/strain gauge amplifier
MX1615B Bridge/strain gauge amplifier Special features 16 individually configurable inputs Connection of strain gauges in quarter-, half- and full-bridge Bridge excitation : DC or carrier frequency Internal
More informationTorque Measurement T12 The Digital Torque Transducer
Torque Measurement T12 The Digital Torque Transducer Photos 21.11.2014, Folie 2 Hottinger Baldwin Messtechnik GmbH Rainer Schicker Trade name smarttorque Effective until 2013-02-28 Extension by 10 years
More informationMX1615B. Strain gauge bridge amplifier. Special features. Data sheet. Block diagram
MX1615B Strain gauge bridge amplifier Special features - 16 individually configurable inputs - Connection of strain gauges in full-, half-, or quarter-bridge (120 or 350 Ohm) - Bridge excitation : DC or
More information7600 Isolated Digitizer and Receiver
7600 Isolated Digitizer and Receiver Data sheet GEN series Features and Benefits - Complete single-channel isolated analog input subsystem - Rugged enclosure for use in EMI hostile environments - Shock
More informationISOBE5600. Data sheet. Isolated Probe Systems. - ISOBE5600 Isolation system - ISOBE5600 Transient recorder. Features and Benefits
ISOBE5600 Isolated Probe Systems - ISOBE5600 Isolation system - ISOBE5600 Transient recorder Data sheet Features and Benefits ISOBE5600 Isolation system - Cost-effective - Fiber-optic isolation - Analogue-in
More informationTension/compression force transducer. With thin film technology up to 100 kn. Models F2301, F23C1, F23S1. Force. Applications.
Force Tension/compression force transducer With thin film technology up to 100 kn Models F2301, F23C1, F23S1 WIKA data sheet FO 51.17 Applications Crane systems and hoists Industrial weighing technology
More informationInstallation Guide. English. FS62 Composite Strain Sensor
Installation Guide English FS62 Composite Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com HBM FiberSensing,
More informationSpecifications (in accordance with DIN 16086) Equipment family Digibar II Type 1-PE50A1/...; K-PE PE00A1/...; K-PE00... Class of accuracy 0.2 0
Digibar II: PE00, PE50 Digital pressure gage Special features Data Sheet PE00 PE50 Operated as manometer with battery operation and Operated as pressure measurement transmitter with 420 current output,
More informationSMSTRB. Data Sheet. Strain SMART Module. Special Features. Block Diagram. B en
SMSTRB Strain SMART Module Data Sheet Special Features - Conditions and amplifies output to a high level signal for use with the SoMat EHLS or ELHLS - Strain gage conditioning with support for 1/4-, 1/2-
More informationK3D60a ±100N. Description. The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes.
K3D60a ±100N Description The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes. The new 3-axis sensor K3D60a is a further development of the series K3D60 and
More informationThe new dimension in torque measurement
Digital torque measurement system The new dimension in torque measurement T12 The digital measurement system Torque Rotational speed Power smarttorque T12 The complete torque in a single transducer SIEMENS
More informationCPU. BM40, BM40PB, BM40IE Industrial amplifier. Special features. Data sheet. Block diagram
Industrial amplifier Special features - Freely configurable measurement channel with TEDS channel parameterization - Connection of 7 transducer technologies with a 19.2 KHz sample rate - Accuracy class
More informationModel LBS Miniature Compression Load Button
Model LBS Miniature Compression Load Button Why the Interface model LBS Miniature Compression Load Button is the best in class: Temperature compensated Integral load button Small diameter From." height
More informationPOSIROT. PRAS3EX Magnetic Angle Sensor. Magnetic Angle Sensors (Dust-Ex-proof) Datasheet
Magnetic Angle Sensors (Dust-Ex-proof) Magnetic Angle Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of
More informationShear beam With thin-film technology from 2 kn Models F3301, F33C1, F33S1
Force Shear beam With thin-film technology from 2 kn Models F3301, F33C1, F33S1 Rated force From 0...2 kn Applications Industrial weighing technology Machine building and plant construction, manufacturing
More informationT12. Digital Torque Transducer. Data Sheet. Special features. Block diagram signal flow. B en
T12 Digital Torque Transducer Data Sheet Special features Nominal (rated) torques of 100 NVm, 200 NVm, 500 NVm, 1 knvm, 2 knvm, 3 knvm, 5 knvm and 10 knvm Nominal (rated) speeds from 10,000 rpm to 18,000
More informationMX460B. Data sheet. Pulse and Frequency Measurement Module. Special features. Block diagram. B en
MX460B Pulse and Frequency Measurement Module Data sheet Special features 4 individually configurable inputs (electrically isolated) Measure any kind of digital pulses up to 1 Mhz for measurement of speed,
More informationInstallation Guide. English. FS62 Miniature Polyimide Strain Sensor
Installation Guide English FS62 Miniature Polyimide Strain Sensor Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com www.hbm.com
More informationMeasurement range. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
Magnetic Angle Sensor with Analog Output Magnetic Angle Sensor 0-360 Measurement range 0-360 Protection class IP67 Analog output Compact, low profile housing Non-contact with external position magnet Wear
More informationMX410B. Highly dynamic universal amplifier. Data sheet. Special features. Block diagram
MX410B Highly dynamic universal amplifier Special features - 4 individually configurable inputs (electrically isolated) - Connection of more than 5 transducer technologies - Individual sample rates up
More informationELDIO. Data Sheet. edaqlite Digital Input/Output Layer. Special Features. Block Diagram. B en
ELDIO edaqlite Digital Input/Output Layer Data Sheet Special Features - 8 digital inputs/outputs, 4 wide-range inputs, 6 configurable pulse counters and up to two independent vehicle bus module interfaces
More informationOperating Manual Series Load Pins
Operating Manual 5301 Series Load Pins Safety note Use for intended purpose The force transducers in model series F5301 are intended for the measurement of static and dynamic tensile or compressive force.
More informationLoad pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1
Force Load pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1 tecsis data sheet FO 51.18 Applications Crane systems and hoists Industrial weighing technology Machine building and plant
More informationULTRASTAB IHF Precision Current Transducer
ULTRASTAB 867-200IHF Precision Current Transducer The Ultrastab 867-200IHF Current Transducer is a model in the Ultrastab Current Transducer program. It is the second generation of current transducers
More informationEBRG. Data Sheet. edaq Bridge Layer. Special Features. Block Diagram. B en
EBRG edaq Bridge Layer Data Sheet Special Features - 16 simultaneously-sampled, low-level differential analog inputs from ±0.000625 to ±10 V - 96 automatic gain states ensuring use of the fullest possible
More informationOperating manual. 600 Hz Measuring Amplifier ME30. A en
Operating manual 600 Hz Measuring Amplifier ME30 ME30 Contents 3 Page Safety instructions............................................. 4 1 Measuring Amplifiers on Eurocards ME30.................... 8
More informationDistance Sensors BOD 26K.... with optional Master-Slave-Mode
Distance... with optional Master-Slave-Mode Laser Distance The Balluff distance sensor not only detects the presence of objects, but can also indicate their precise position or location. This means the
More informationAcceleration Sensor AS - 022
1 Application Acceleration Sensor AS - 022 The acceleration sensor AS-022 is used for measurement of vibration acceleration. Fig. 1 Acceleration Sensor AS - 022 2 Measuring Principle 3 Technical Data Acceleration
More informationResistance Thermometers Model Series TR7X0, Sheathed Design
Electrical Temperature Measurement Resistance Thermometers Model Series TR7X0, Sheathed Design WIKA Data Sheet TE 60.40 Applications T Suitable for all industrial and laboratory applications Special Features
More informationLoad pin Heavy Duty with thin film technology from 10 kn Models F5308, F53C8, F53S1
Force Load pin Heavy Duty with thin film technology from 10 kn Models F5308, F53C8, F53S1 tecsis data sheet FO 51.43 Applications Crane systems, hoists, offshore Industrial weighing technology Machine
More informationRG Connector (Molded Mating Extension Cable Required) A H B G. MS Connector (Mating Connector: P/N ; MS3116F-12-10S or Extension Cable)
T E M P O S O N I C S L S E R I E S INSTALLATION A N A L O G O U T P U T 550570 B W I R I N G - A N A L O G O U T P U T S RG Connector: (Voltage or Current Output) 1 Gray 0 to 10 Vdc, 4 to 20 ma, or 0
More informationTorque Sensor DML 500 S080S10X
Bearing unit with integrated torque sensor Measurement range from 0 to 500Nm bidirectional High tolerable dynamic loads High tolerable transverse forces and bending moments Maintenance-free operation Torque
More informationProduct Information. RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications
Product Information RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications September 2013 RCN 2000 series Absolute angle encoders for safety-related applications Safe absolute
More informationTemposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet
Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING
More information5.5 SLG 75. Read/Write Devices Read/Write Antennas
5.5 SLG 75 Application area SLG 75 The SLG 75 ANT is a read/write device in the middle of the performance range. It can only be used with ANT 1, ANT 12, ANT 18 and ANT 30. The antennas can be very easily
More informationForce and weight measuring instruments
JJ Force sensors and load cells JJ Measurement amplifiers JJ Mechanical and electronic accessories JJ Combination units JJ Force calibration systems Force and weight measuring instruments DS_Force_and_weight_measuring_instruments
More informationLoad pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1
Force Load pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1 WIKA data sheet FO 51.18 Applications Crane systems and hoists Industrial weighing technology Machine building and plant
More informationCold curing adhesive K-X280
Instructions for use English Cold curing adhesive K-X280 A4048-1.0 en English 1 Safety instructions... 3 2 General information... 3 2.1 Scope of delivery for K-X280... 3 2.2 Accessories required for installation...
More informationPressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
More informationMeasuring current transformers of the W, W series
Measuring current transformers of the W, W -8000 series W(-8000)_D00078_01_D_XXEN/09.2015 Measuring current transformers of the W, W -8000 series Product description The highly sensitive W and W -8000
More informationMX840B. Data Sheet. Universal amplifier CAN. Special features. Block diagram. B en
MX840B Universal amplifier Data Sheet Special features 8 individually configurable measurement channels (electrically isolated) Connection of more than 16 transducer technologies per channel Individual
More informationTechnical data Model F1301 F13C1 ATEX/IECEX 2) F13C1 (Option) Nominal load F nom 10 / 20 / 30 / 50 / 100 / 200 kn 10 / 20 / 30 / 50 / 100 / 200 kn 10
Compression force transducer with Thin-film sensor Accuracy: 1 % Output signal: 4...20 ma; 2-wire, 0...10 VDC; 3-wire Optional Optional ATEX/IECEX II 2G Ex ib IIC T4/T3 for SIL3-Applications with 2-channel
More informationInstruction Manual MSC710 MSC710-U MSC710-I
Instruction Manual MSC710 MSC710-U MSC710-I Sensor controller for inductive displacement and gauging sensors series LVDT MICRO-EPSILON MESSTECHNIK GmbH & Co. KG Koenigbacher Strasse 15 94496 Ortenburg
More informationSpeed and position sensor MiniCoder GEL 2442
Speed and position sensor MiniCoder GEL 2442 contactless, high-resolution, high speed Technical information version 01.09 Functional description Measurement of speed and position by proximity sensing of
More informationHeavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
More information2-channel speed sensor GEL 248 Compact sensor with HTL-/TTL-output signals
2-channel speed sensor GEL 248 Compact sensor with HTL-/TTL-output signals Technical information Version 08.09 General information Application approved speed sensor based on magnetic measurement principle
More information