Precision Matters And It Pays For Itself
|
|
- Louisa Pearson
- 5 years ago
- Views:
Transcription
1 Precision Matters And It Pays For Itself Hall 5 Booth E17 Tubes and Profiles: Full Measurement and Control in All Manufacturing Processes
2 Complex Profiles Perfect Real-Time Monitoring of Complex Profiles ZUMBACH s powerful, modular PROFILEMASTER SPS systems exceed even the highest quality expectations. Thanks to their intelligent light section technology, the PROFILEMASTER SPS systems record 4000 contour points per sub-segment and detect process problems reliably at early stages. Solution: PROFILEMASTER SPS integrated MFS system* for continuous and stable data collection sturdily built for harsh hot rolling conditions up to 1200 C records all product data for the QC department remote data analysis * MFS = Measuring Frame Stabilisation
3 Non-Contact Quality Control All Eyes on Your Process Times Per Second STEELMASTER SMR is the benchmark for non-contact quality control of profiles. Whether it is a round, oval, hexagonal or flat product, cold or hot rolled steel profiles, products with short lengths or high-speed processes the high scanning rates always ensure a clear image. The measured data is compiled in millisecond intervals. Not only is this extremely fast, but also absolutely precise. Solutions: STEELMASTER SMR, SMO, SMS completely contact-free transmission system for energy and signals detects geometrical faults and rolling errors computes 10 cross-sections per second, enables fast readjustments and minimizes scrap production STEELMASTER SMO: Square, hexagonal and flat products are measured with a high point to point resolution at the corner of their fullest extent. STEELMASTER SMS: Easily integrated and perfectly suited for round products. SMS devices are similarly built to SMO devices except for the oscillating mechanism. They are very compact and solid.
4 Cold-rolled, drawn, extruded Profiles Measure Precision Profiles Independent of Position and Twist In-line height and width measurement with the oscillating DVW 1 device in combination with ODAC laser gauges guarantee a highly precise measurement independent of the product s torsional position. DVW 1, ODAC Thanks to the continuous oscillating motion of the laser gauge combined with the electronic minimal value detection of the respective size, the measurement of height (or thickness) is very accurate. The oscillating device works reliably without interruption or maintenance.
5 Straightness Centerless Grinding The Precision of ODAC Laser Scanners Is Very Versatile Continuous Straightness Measurement with Start and End Filtering Detect every bend use precision ODAC sensor technology to determine diameter and position. Combined with high-performance software, the system detects every deviation from the desired straightness. The measured diameter is analysed with the system in real-time. Hence the straightening can be carried out immediately after the deviation is detected. ODAC ODAC ODAC Quality Control in Centerless Grinding Centreless grinding process is often with an environment characterized by metal dust, cooling liquids and high-frequency vibrations. Still diameter, ovality and polygonality have to be measured precisely. Thanks to ODAC laser measuring technology, a very accurate quality control in peeling and centreless grinding can be guaranteed even if it is carried out in less than ideal circumstances. Add to this the possibility of giving the grinding machine controlling feedback in order to automate the adjustment of the grinding machine s setup. This means that wear can be compensated by a regulation of the grinding/cutting heads. Therefore, the desired tolerances can be adhered to at all times.
6 Find us in hall 5 booth E17 at the Tube 2014 Wold-wide network for sales & service ZUMBACH companies ZUMBACH agencies Trade Fair Competition Are you an expert? Test your knowledge and win the ZUMBACH sweepstake at our exhibition wire stand D43 in hall 11! ZUMBACH Electronics sales@zumbach.ch I
Steel Metal. Dependable Measurement & Monitoring Solutions
Steel Metal Dependable Measurement & Monitoring Solutions Long history, innovation and experience Facts Over 65'000 ODAC laser heads in use for various processes Over 500 ODAC systems in the field for
More informationMeasurement Solutions for Tubes and Bars
Measurement Solutions for Tubes and Bars Laser based measurement systems for the steel industry Measurement solutions for tubes and bars We measure your way to perfection LIMAB Your partner for in-line
More informationQIROX Sensor systems. Top quality with each weld seam
QIROX Sensor systems Top quality with each weld seam Precision work! Looking into space requires maximum optical precision. Just as your production processes with automated welding technology. Sensors
More informationFor a free video, CD, samples and your nearest EUROBEND representative, please, contact: ADVANCED TECHNOLOGY PRODUCTS
Most types and sizes of mesh sheets can be produced accurately and efficiently directly from coil or pre-cut bars. The PLR Series of mesh welding lines offer servo-driven operation, and ensure simple machine
More informationThe producers of galvanised steel strip, like all areas
EMG emass electromagnetic strip stabilisation Many hot-dipped galvanising lines (HDGL) tend to over-coat zinc and other coatings because the process control system is unable to compensate for strip oscillation
More informationTESA HITE - TESA MICRO-HITE
CASE STUDY TESA HITE - TESA MICRO-HITE Meggitt Villars-sur-Glâne Switzerland Meggitt plays the Ace for quality assurance A winning combination of speed and precision TESA HITE and TESA MICRO-HITE are tried
More informationModule-4 Lecture-2 Perpendicularity measurement. (Refer Slide Time: 00:13)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-4 Lecture-2 Perpendicularity measurement (Refer
More informationRevolutionizing 2D measurement. Maximizing longevity. Challenging expectations. R2100 Multi-Ray LED Scanner
Revolutionizing 2D measurement. Maximizing longevity. Challenging expectations. R2100 Multi-Ray LED Scanner A Distance Ahead A Distance Ahead: Your Crucial Edge in the Market The new generation of distancebased
More informationStrip straighteners. Strip spectrum The following coil strips can be processed using our straightening
STRIP STRAIGHTENERS Strip straighteners SOPREM Precision Straighteners ensure your product quality. Distorted metal components are a thing of the past; today quality products are processed regardless of
More informationABB Interstand Dimension Control, IDC Improved Tolerances in Profile Mills
ABB Interstand Dimension Control, IDC Improved Tolerances in Profile Mills Mats G Olsson ABB Automation Technologies AB Metals and Mining Vasteras, SWEDEN Tel.: +46 21 340000 E-mail: mats.g.olsson@se.abb.com
More informationLaser joining solutions
TECHNOLOGY FOR THE WELDER S WORLD. Laser joining solutions Laser products overview Since 2001 ABICOR BINZEL has been active in the area of wire feeding for laser welding and brazing, and has an excellent
More informationX-Shape Precise flatness measurement and control
X-Shape Precise flatness measurement and control X-SHAPE Precise X-Shape flatness measuring system with measuring rollers of the latest generation. Challenge In addition to constant strip thickness, the
More informationThe Advantages of Utilizing Centerless Ground Bar in CNC Swiss Screw Machines February, 2015
The Advantages of Utilizing Centerless Ground Bar in CNC Swiss Screw Machines February, 2015 Banner Commercial Abstract The attributes of centerless ground bar offer Computer Numerically Controlled (CNC)
More informationHigh precision centerless grinding of transmission shafts
High precision centerless grinding of transmission shafts Karsten Otto Sales Director China Schaudt Mikrosa GmbH Feng Qi Sales Director - United Grinding China Agenda Company Process characterization Roundness
More informationSensors & Applications Glass Industry. More Precision
Sensors & Applications Glass Industry More Precision Sensors and measuring systems for glass production Modern glass production is increasingly determined by maximum efficiency. Therefore, rapid access
More informationFIXTURLASER NXA Ultimate
FIXTURLASER NXA Ultimate Welcome to our world. Since the very beginning in 1984, ACOEM AB has helped industries throughout the world to achieve more profitable and sustainable production. We have reached
More informationMeasuring systems for ironing rings and punches
Measuring systems for ironing rings and punches Equipment and proven technology for precision tooling measurement in beverage can industry RINGMASTER THE MASTER TOOL FOR RING MEASURE MENT RINGMASTER provides
More informationDISC FINISHING MACHINES
Application Processing of small parts Larger parts (from approx. 50 g weight can also be processed individually) Thanks to high rotational speed and high relative speeds, reduction of processing times
More informationApplication of SLOFEC and Laser Technology for Testing of Buried Pipes
19 th World Conference on Non-Destructive Testing 2016 Application of SLOFEC and Laser Technology for Testing of Buried Pipes Gerhard SCHEER 1 1 TMT - Test Maschinen Technik GmbH, Schwarmstedt, Germany
More informationUltrasonic Wall and Concentricity Measurement Systems UltraScan Series
Ultrasonic Wall and Concentricity Measurement Systems UltraScan Series Providing Unmatched Precision & Performance for Plastic Pipe Production The UltraScan Advantage: Achieves the highest ultrasonic accuracy
More informationCONTOUR CHECK REAL-TIME LASER PROFILE MEASUREMENT
EN REAL-TIME LASER PROFILE MEASUREMENT QUALITY AND EXPERIENCE SINCE 1984 LAP laser measurement systems are successfully used worldwide in metals industries, mostly in steel industry. They prove themselves
More informationShaftGrind S. Key data. Compact and extremely versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Compact and extremely versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees
More informationMEASURING SYSTEMS FOR THE STEEL INDUSTRY
EN MEASURING SYSTEMS FOR THE STEEL INDUSTRY WORLDWIDE, MORE THAN 200 LAP SYSTEMS ARE SUCCESSFULLY IN USE LAP MEASUREMENT ENGINEERING FOR THE STEEL INDUSTRY For more than 20 years, LAP systems have been
More informationIn-line measurements of rolling stock macro-geometry
Optical measuring systems for plate mills Advances in camera technology have enabled a significant enhancement of dimensional measurements in plate mills. Slabs and as-rolled and cut-to-size plates can
More informationWelding systems for industrial and fencing mesh Systems MG950, MG900, MG700, MG600, Syrocut and POSIWELD
Welding systems for industrial and fencing mesh Systems MG950, MG900, MG700, MG600, Syrocut and POSIWELD 2 Areas of application Mesh with different line wire spacings Economic production of industrial
More informationCamGrind S. Key data. Small and versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Small and versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees high-precision
More informationWe offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting
We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting bending, pressing and forming turning and milling welding - stainless,
More informationVKI3. Inductive strip edge position control for rolling mills. single-side robust maintenance-free
VKI3 Inductive strip edge position control for rolling mills single-side robust maintenance-free VKI3 Strip edge position control of metal str Operating principle: In advanced rolling mills, knowledge
More informationCamGrind L. Key data. Superproductive and perfect for batch production. A member of the United Grinding Group
A member of the United Grinding Group Superproductive and perfect for batch production Key data The as a single-slide or two-slide machine allows you to machine shaft-type components with a length of up
More informationINDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE. On Industrial Automation and Control
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE On Industrial Automation and Control By Prof. S. Mukhopadhyay Department of Electrical Engineering IIT Kharagpur Topic Lecture
More informationWire feeding systems for welding applications
Wire feeding systems for welding applications The perfect drive package! u precise wire feeding u modern drive concept u fully digitalized process control u detailed monitoring u maximum production reliability
More informationEco-Sert Aluminium inserts. lightweight flexible durable. stable environmentally friendly corrosion resistant.
Version published 01/2017 www.arnold-fastening.com Eco-Sert Aluminium inserts lightweight flexible durable www.arnold-fastening.com stable environmentally friendly corrosion resistant Eco-Sert Aluminium
More informationIntroducing: Metal folding
Press Release / 15.09.2008 / copyright 2008 RAS Reinhardt Maschinenbau GmbH Richard-Wagner-Str. 4 10 71065 Sindelfingen Germany Tel. +49-7031-863-0 Fax +49-7031-863-185 www.ras-online.de Info@RAS-online.de
More informationInspection systems for the metal industry
Inspection systems for the metal industry 2 References (extract) Innovative laser line measurement Innovative laser line Non-contact thickness measurement with 1280 discrete measuring points Lateral micrometer
More informationLaser Technology Improves and Makes Easier Post-Process Measuring On Centreless Grinders. Application Note. A. Spizzamiglio - Aeroel - Italy SUMMARY:
Application Note Laser Technology Improves and Makes Easier Post-Process Measuring On Centreless Grinders. SUMMARY: Introduction Laser Technology sets new performance standards Application for centreless
More informationPF 61 Universal Cylindrical Grinding Machine PF 61 Universal Cylindrical Grinding for Flexible Production Thanks to its modular design, the PF 61 universal cylindrical grinding machine is your ideal choice
More informationBRASS/BRONZE GRADES STOCKED AUTOMATIC EXCEPTIONS TO THE SPECS LISTED ARE: LINE MARKING AND INSPECTION (I.E. MAG., SONIC, ETC.) MACHINABILITY RATINGS
144 BRASS/BRONZE GRADES STOCKED 144 SPECIFICATIONS BRASS ALLOY 360, FREE CUTTING, 1/2 HARD CHEMISTRY ONLY TO: ASTM-B-16 AND SAE CA - 360 SPECIFICATIONS NI-AL-BRZ (ALLOY C-630) AMS-4640, ASTM-B-150, ASME-B-150,
More informationNEW SITUATION IN COLD MILLS SINCE VTLG THICKNESS MEASUREMENT WITH LASER IS POSSIBLE
IWCC TECHNICAL SEMINAR 2018, CHICAGO NEW SITUATION IN COLD MILLS SINCE VTLG THICKNESS MEASUREMENT WITH LASER IS POSSIBLE IWCC Legal Disclaimer: The purpose of this presentation is to guide programs benefiting
More informationMetrology and instrumentation Indian Institute of Technology
Metrology and instrumentation Indian Institute of Technology SOURCE: S. KALPAKJIAN BOOK SLIDE-WAY CROSS-SECTION Cross-section of a machine tool slide-way. The width, depth, angles, and other dimensions
More informationKey data. Precision for small workpieces. A member of the United Grinding Group
A member of the United Grinding Group Precision for small workpieces Key data The offers maximum precision for small workpieces. This compact and versatile centerless grinding machine combines speed with
More informationCALENDERING INDUSTRIES
CALENDERING INDUSTRIES Advanced Web Solutions APPLICATION NOTE WEB GAUGING NDC s Calender Solutions: Engineered to deliver outstanding results from your process NDC s Calendering Systems represent reliable
More informationAUTOMATED SPLICING SYSTEM. z-inline splicing
AUTOMATED SPLICING SYSTEM z-inline splicing z-inline splicing Integrated splicing of sealing rings, automated and directly coupled to the extrusion line Maximum process reliability and highest degree of
More informationMachine tooling technology. Zero point clamping system SPN THE KNOW-HOW FACTORY.
Machine tooling technology Zero point clamping system SPN THE KNOW-HOW FACTORY www.zimmer-group.com ORDER INFORMATION ZERO POINT CLAMPING SYSTEM SPN STRUCTURE OF THE ORDER NUMBER ORDER NUMBER SAMPLE SP
More informationm&h LASER TOOL SETTERS
m&h LASER TOOL SETTERS MEASURING ON MACHINE TOOLS PRODUCT BROCHURE m&h LASER TOOL SETTERS EXACT TOOL DATA FOR MAXIMUM ACCURACY Consistent production quality requires the use of reliable accurate tooling.
More informationOperating manual. TruTool N 500 (1A1) english
Operating manual TruTool N 500 (1A1) english Table of Contents 1. Safety...4 1.1 General safety information...4 1.2 Specific safety information...5 2. Description...6 2.1 Correct use...7 2.2 Technical
More informationParkers. Tolerances on dimensions
Aluminium and aluminium alloys - Extruded rod/bar, tube and pro les Alloy groups The division into Group I and Group II of the most commonly used general engineering alloys is specified in table 1. (Corresponding
More informationMETAL BENDER OPERATING & MAINTENANCE INSTRUCTIONS Model Nos: CCB1 & CCB2 Part Nos: & CCB2 CCB1
METAL BENDER Model Nos: CCB1 & CCB2 Part Nos: 7630073 & 7630074 CCB2 CCB1 OPERATING & MAINTENANCE INSTRUCTIONS 1206 1 The Compact Bender allows you to economically make a variety of bends in flat, square,
More informationImprovement of thickness tolerances for a two-stand aluminum cold rolling mill
Improvement of thickness tolerances for a two-stand aluminum cold rolling mill The implementation of additional control loops to compensate backup roll eccentricity and harmonic hardness variation allows
More informationKRONOS S. Key data. Precision for small workpieces. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Precision for small workpieces Key data The offers maximum precision for small workpieces. This compact and versatile centerless grinding machine combines speed with
More informationIn-line eddy current testing of wire rod
In-line eddy current testing of wire rod By Dr. Thomas Knöll Dr. Thomas Knöll is Managing Director of, Ismaning, Germany. This article appeared in Millennium Steel Journal 2004 and has been reprinted with
More informationDimensional Variations in Tire Tread Extrusions Starrett-Bytewise Measurement Systems May 24, 2013 Abstract
Abstract This study explores variation in the dimensional parameters of tire tread extrusions. The methodology was based on measurement of width and thickness values of treads at two points in the manufacturing
More informationLaser Telemetric System (Metrology)
Laser Telemetric System (Metrology) Laser telemetric system is a non-contact gauge that measures with a collimated laser beam (Refer Fig. 10.26). It measure at the rate of 150 scans per second. It basically
More informationCordless slitting shear C 200. Always a good cut. Machine tools / Power tools Laser technology / Electronics
Cordless slitting shear C 200 Always a good cut Machine tools / Power tools Laser technology / Electronics 2 Field of application Perfect for spiral ducts The powerful TruTool C 200 Li-Ion slitting shear
More informationProfiting with Wire EDM
3 Profiting with Wire EDM Users of Wire EDM 55 Parts made with the wire EDM process are used for machining conductive materials for medicine, chemical, electronics, oil and gas, die and mold, fabrication,
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION Issued MAY 1945 Revised AUG 2005 Superseding AMS 2241N Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire 1. SCOPE:
More informationFRÖHLING INSIGHT.
03.2018 FRÖHLING INSIGHT www.danieli-froehling.de 2 DANIELI Fröhling WAELZHOLZ NEW MATERIAL ORDERS COLD REVERSING MILL AND TWO FINISHING LINES O n November 23, 2017, Waelzholz New Material Co., Ltd, awarded
More informationISO INTERNATIONAL STANDARD. Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties
INTERNATIONAL STANDARD ISO 657-14 Third edition 2000-03-15 Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties Profilés en acier laminés à chaud
More informationThe most economical deburring machines in the world. Paul ERNST Maschinenfabrik GmbH
The most economical deburring machines in the world Paul ERNST Maschinenfabrik GmbH Paul ERNST Maschinenfabrik GmbH Company Ernst was established over 50 years ago. During first years ERNST was a successful
More informationExperts for non-contact measuring technologies
Experts for non-contact measuring technologies Detecting - Positioning - Measuring Kempf GmbH & Co. KG realizes automation processes and logistic projects in heavy industries - especially in steelworks
More informationAssure best processing and product quality with the world s first In-line 3D Measuring Plate Inspection
Saving Costs at Inspection, Analysis and Repair of Hot and Cold Heavy Plates Assure best processing and product quality with the world s first In-line 3D Measuring Plate Inspection Aachen,. ISRA VISION
More informationHIGHER QUALITY. FASTER MOULDS.
HIGHER QUALITY. FASTER MOULDS. Established in 1952, SCHÖTTLI has evolved from pioneer of the injection moulding industry to global player and specialist for developing and manufacturing moulds and complete
More informationeos fancy The perfect girdle for all shapes
www.hrdantwerp.be eos fancy eos Fancy Introduction Since the introduction of EOS bruting machines, round stones are no longer girdled by means of traditional machines or procedures. In recent years, the
More informationCatalog No. E Perfectly formed for production, quality control rooms and laboratories form measuring instruments from Mitutoyo
FORM MEASUREMENT Catalog No. E4261-211 Perfectly formed for production, quality control rooms and laboratories form measuring instruments from Mitutoyo You define the task... ROUNDTE Measuring technology
More informationINTERPLANT STANDARD - STEEL INDUSTRY
INTERPLANT STANDARD - STEEL INDUSTRY IPSS SPECIFICATION OF SENSOR MEASUREMENTS OF LENGTH OF ROLLED MATERIALS IPSS: 2-07-037-13 (First Revision) Corresponding Indian Standard does not exist Formerly-: IPSS:
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4019 Second edition 2001-09-01 Structural steels Cold-formed, welded, structural hollow sections Dimensions and sectional properties Aciers de construction Profils creux pour
More informationHIGH THROUGHPUT MINIMUM SET-UP TIME BT-Z LARGE BAR PEELERS
UPDATE ON HETRAN BT-Z LARGE BAR PEELERS: MAXIMIZING PRODUCTIVITY IRRESPECTIVE OF ALLOY, BAR OR TUBE DIAMETER! Copyright September 2013 All Rights Reserved REVOLUTIONARY WORLD-CLASS DESIGN EXTENSIVE RANGE
More informationof the rollers on top of each other for each press of the rollers. A self-supporting rack enables the avoidance of misalignment
Products for levelling and shaping band saws, guide rails, circular saws and circular knives MR 0 The MR 0 is conducive to the levelling of saw bands and guide rails. With the addition of an auxiliary
More informationMEASUREMENT TECHNOLOGY SOFTWARE
Creating Tool Performance A member of the UNITED GRINDING Group MEASUREMENT TECHNOLOGY SOFTWARE For HELICHECK CNC tool measuring machines Key parameters measuring technology software for fully automatic,
More informationNew generation of welding and inspection systems
New generation of welding and inspection systems Throughout the pipeline industry, and particularly in offshore and spool base production, welding requirements are shifting toward higher quality, greater
More informationPunching 3/16" diameter round hole in up to 3/16" thick (flat strip metal).
Wrought Iron Handicrafts, Inc. 3950 10 th Ave NW Rochester MN 55901-1336 507-289-0836 phone 800-456-7738 phone info@metalcraftusa.com email The ultimate dream machine for fabricators and ornamental metal
More informationMetalsa: Automated Quality Control of Formed Sheet Metal Parts
Application Note Metalsa: Automated Quality Control of Formed Sheet Metal Parts Location / country: Bergneustadt, Germany GOM system: ATOS ScanBox 6130 GOM software: ATOS Professional Sector: automotive
More informationSBA Technology by ZEMAN
1 THE FUTURE IS NOW 2 Revolution in steel-beam fabrication ZEMAN has developed a fully automated production line for practically any type of steel beam that includes add-on parts. Possible combinations
More informationThe Engineer s Guide to Identifying Lead Screw Thread Forms
The Engineer s Guide to Identifying Lead Screw Thread Forms Thread Forms There are hundreds of different thread forms that have been designed over several decades. There are only a few specific thread
More informationMeasurement technology for inline quality inspection in plastics production. More Precision
Measurement technology for inline quality inspection in plastics production More Precision Sensors and measurement systems for plastics production Miniaturization and increased production speeds together
More informationStandard Micro 400 safety light curtains are factory assembled in IP69K polycarbonate enclosures with Delrin end caps.
Standard Micro 400 safety light curtains are factory assembled in IP69K polycarbonate enclosures with Delrin end caps. Micro 400 IP69K safety light curtains are offered in 14mm resolution with a 5 meter
More informationCOMPETITIVE EDGE. A perfectly beveled edge can make a big difference in producing the highest quality weld possible. by Abbe Miller, editor-in-chief
COMPETITIVE EDGE A perfectly beveled edge can make a big difference in producing the highest quality weld possible by Abbe Miller, editor-in-chief Almost everything that a welding shop does particularly
More informationKey data. Maximum performance for large workpieces. A member of the United Grinding Group
A member of the United Grinding Group Maximum performance for large workpieces Key data The has been specially designed for high-precision machining of large, heavy workpieces. This centerless grinding
More informationMEASUREMENT APPLICATION GUIDE OUTER/INNER
MEASUREMENT APPLICATION GUIDE OUTER/INNER DIAMETER Measurement I N D E X y Selection Guide P.2 y Measurement Principle P.3 y P.4 y X and Y Axes Synchronous Outer Diameter Measurement P.5 y of a Large Diameter
More informationSWT 700/900 Fascination Sanding
SWT 700/900 Fascination Sanding Optimat profiline powerline A B O U T B Ü T F E R I N G B Ü T F E R I N G S W T 7 0 0 / 9 0 0 Ideal range of performance SWT 700 SWT 900 Feed speed < 35m/min < 65m/min Working
More informationPRODUCT BROCHURE PROFILER R. Tactile sensor for roughness measurement on Leitz CMMs
PRODUCT BROCHURE PROFILER R Tactile sensor for roughness measurement on Leitz CMMs 2 PROFILER R Tactile sensor for roughness measurement on Leitz CMMs ROUGHNESS MEASUREMENTS ON CMMs COMPLETE YOUR CMM WITH
More informationMACHINE TOOLS GRINDING MACHINE TOOLS
MACHINE TOOLS GRINDING MACHINE TOOLS GRINDING MACHINE TOOLS Grinding in generally considered a finishing operation. It removes metal comparatively in smaller volume. The material is removed in the form
More informationKey data. Flexibility for medium-sized workpieces. A member of the United Grinding Group
A member of the United Grinding Group Flexibility for medium-sized workpieces Key data The combines precision and highest productivity in a single machine. Its modular design allows the centerless grinding
More informationWelding and cutting technology
Welding and cutting technology TIG manual welding Tungsten inert gas welding is one of the gas-shielded arc welding processes. The arc burns between a tungsten electrode that does not melt and the work
More informationA member of the United Grinding Group. CamGrind XXL. Large and powerful. Schleifaufgabe die optimale Lösung.
A member of the United Grinding Group Large and powerful Eckdaten Key data Mit The der als is the Ein- ideal oder production Zweischlittenmaschine machine bearbeiten for the Sie complete wellenförmige
More informationCNC Dressing Discs. Precision Engineering Solutions
CNC Dressing Discs Precision Engineering Solutions CNC Dressing Discs CNC dressing discs can be used as an alternative to full form diamond dressing rolls by allowing the user to generate profiles using
More informationMiDA 4.0 ENDLESS CASTING AND ROLLING EMPOWERED BY DIGITAL TECHNOLOGIES
OMAR NARDUZZI DANIELI GROUP 2018 SEAISI CONFERENCE & EXHIBITION 25-28 JUNE 2018 JAKARTA MiDA 4.0 ENDLESS CASTING AND ROLLING EMPOWERED BY DIGITAL TECHNOLOGIES DANIELI / SINCE 1914 PASSION TO INNOVATE AND
More informationWEBER Grinding Machines
HEAVY PLATE MACHINING WEBER Grinding Machines Grinding, rounding, deburring and descaling of fl ame-cut and plasma-cut parts 1913 WEBER works according to a 100-year-old tradition and experience in building
More informationDouble Bar Plate Dowels for Saw-Cut Contraction Joints
Double Bar Plate Dowels for Saw-Cut Contraction Joints Designed to Deliver More Serviceable Slabs Concrete slabs-on-ground must be able to withstand the repetitious, concentrated loads and abrasion of
More informationMEASURING OF ROLLED STRIP PROFILE
MEASURING OF ROLLED STRIP PROFILE AUTHORS FULL NAMES: Mr. Robert Karásek, Commercial representative for Spanish Market Mr. Pavel Vitoslavský, Commeorcial Director of the company THE COMPANY: UVB TECHNIK
More informationRepeatability. ± 0.2 µm ( '') Centrally focused / 639 nm / <1 mw. Temperature range 10 C - 50 C
Measuring on Machine Tools Technical Data The is a high-end system for dynamic, non-contact tool measurement allowing automatic checks for tool wear or breakage. A focussed laser provides accurate measurement
More informationB-Field Scanner. BENEFITS Easy to use Fits to a wide range of voice coil gaps Fully supported by Klippel RnD System Dedicated measurement software
B-Field Scanner Accessory of the KLIPPEL R&D SYSTEM (Document Revision 1.4) FEATURES Robust & accurate Hall Probe One of the smallest Hall sensors (0.65mm thickness) available Stand-alone Gauss meter (with
More informationInstructions for Installation on a Flat Roof
Lightway, s.r.o. Registered office: Ledvinova 1714, 149 00 Praha 4 Offices: Za Humny 1054/4a, 161 00 Praha 6 tel.: 235 300 694, fax: 235 300 218 Company ID No.: 63669366, Tax ID No.: CZ63669366 Bank: KB
More informationOUR COMPANY.
PARTS CATALOGUE OUR COMPANY www.vanguradpailung.com Vanguard Pai Lung has been manufacturing precision, quality and innovative custom designed knitting machines in the USA since 1916. Combined with a full
More informationType C 66 Type C 67 Type C 68 Type C 69
Always a cut above since 1870 Horizontal CNC contour cutting centers Type C 66 Type C 67 Type C 68 Type C 69 Monika Marcinkowski Purchase René Matt Purchase Manager Fecken-Kirfel produces precise and efficient
More informationThe Strip Processing Equipment Company
PT Win Thermal Solusindo Jembatan Tiga Raya No.6A, Jakarta 14440, Indonesia www.win therm.com / 021-66600050 The Strip Processing Equipment Company Stand Alone Tension Leveling Lines Process Lines Precision
More informationWALLY ROTARY ENCODER. USER MANUAL v. 1.0
WALLY ROTARY ENCODER USER MANUAL v. 1.0 1.MEASUREMENTS ANGULAR POSITIONING a. General Description The angular positioning measurements are performed with the use of the Wally rotary encoder. This measurement
More informationGeometric Dimensioning and Tolerancing
Geometric Dimensioning and Tolerancing (Known as GDT) What is GDT Helps ensure interchangeability of parts. Use is dictated by function and relationship of the part feature. It does not take the place
More informationUniframe. Tables and Convertible Bench easy to operate easy to move easy to store
Uniframe Tables and Convertible Bench easy to operate easy to move easy to store 2 Sit on it. Sit at it. Nest it. Roll it away. UNIFRAME Convert a room to anything you want it to be... cafeteria, study
More informationEngineering Metrology and Instrumentation
Engineering Metrology and Instrumentation Machine-Tool Slideway Figure 35.1 Cross-section of a machine-tool slideway. The width, depth. Angles, and other dimensions all must be produced and measured accurately
More informationdesign and trading company Manufacturer of metal forming machinery POLAND presses rolling mills punch presses
design and trading company Manufacturer of metal forming machinery POLAND presses rolling mills punch presses UPH 28 Horizontal hydraulic press - Built-in memory makes it possible to save up to 4 bending
More information