TX-2B/RX-2B. Silan Semiconductors Û REMOTE CONTROLLER WITH FIVE FUNCTIONS HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD DESCRIPTION FEATURES
|
|
- Godwin Black
- 5 years ago
- Views:
Transcription
1 Semiconductors REMOTE CONTROLLER WITH IVE UNCTIONS DESCRIPTION The is a pair of CMOS LSIs designed for remote controlled car applications. The has five control keys for controlling the motions (i.e. forward, backward, rightward, leftward and the turbo function ) of the remote controlled car. EATURES * Wide operating voltage range (VCC=.~.0V) * Low stand-by current * Auto-power-off function for TX-B * ew external components are needed TX-B RX-B DIP- DIP- ORDERING INORMATION Part No. Package TX-B DIP RX-B DIP BLOCK DIAGRAM OSC TEST B OSCI OSCO Oscillator Timing Generator RIGHT V DD LET TURBO ORWARD Latch Circuit Encoding Circuit Logic 0 PC SO SC BACKWARD TRANSMITTER TX-B Block Diagram 00.0.
2 Semiconductors BLOCK DIAGRAM OSCI Oscillator Timing Generator V DD OSCO SI AMP Decoding Circuit Computer VO VI PLA LDB RDB Control Logic RIGHT LET VI Latch Circuit 0 TURBO BACKWARD VO ORWARD RECEIVER RX-B Block Diagram PIN CONIGURATION RIGHT LET VO VI TEST OSC VO ACKWARD ORWARD TX-B 0 OSCI OSCO PC SI OSCI OSCO RX-B VI VDD TURBO TURBO VDD RIGHT ORWARD SC SO LET 0 BACKWARD ROB LDB 00.0.
3 Semiconductors ABSOLUTE MAXIMUM RATINGS Characteristic Symbol Value Unit Supply Voltage VDD 0.~.0 V Input / Output Voltage VIN, VOUT -0.~VDD+0. V Operating Temperature TOPR -0~ C Storage Temperature Tstg -~ C ELECTRICAL CHARACTERISTICS. TX-B (VDD=.0V, osc=khz, Tamb = C, unless otherwise specified.) Characteristic Symbol Min Typ Max Unit Operating Voltage VDD..0.0 V Operating Current IDD ma Stand-By Current ISTB µa DC O/P Driving Current Idrive ma AC O/P Driving Current Idrive ma AC O/P requency audio khz. RX-B (VDD=.0V,osc=KHz, Tamb= C, unless otherwise specified.) characteristic Symbol Min Typ Max Unit Operating Voltage VDD..0.0 V Operating Current IDD ma O/P Driving Current Idrive ma O/P Sinking Current Isink ma Effect Decoding requency Variation tolerance % PIN DESCRIPTION. TX-B Pin No. Symbol Description RIGHT The rightward function will be selected, if this pin is connected to TEST This pin is used for testing mode Negative power supply BACKWARD The backward function will be selected, if this pin is connected to ORWARD The forward function will be selected, if this pin is connected to (To be continued) 00.0.
4 (Continued) Semiconductors Pin No. Symbol Description TURBO The turbo function will be selected if this pin is connected to SC Output pin of the encoding signal with carrier frequency SO Output pin of the encoding signal without carrier frequency VDD Positive power supply 0 PC Power control output pin OSCO Oscillator output pin OSCI Oscillator input pin OSC This pin is used for testing mode LET The leftward function will be selected, if this pin is connected to. RX-B Pin No. Symbol Description VO Inverter output pin for power amplify Negative power supply SI Input pin of the encoding signal OSCI Oscillator input pin OSCO Oscillator output pin RIGHT Rightward output pin LET Leftward output pin ROB Rightward function disable, if this pin is connected to LDB Leftward function disable, if this pin is connected to 0 BACKWARD Backward output pin ORWARD orward output pin TURBO TURBO output pin VDD Positive power supply VI Inverter input pin for power amplify VO Inverter output pin for power amplify VI Inverter input pin for power amplify 00.0.
5 CODE ORMAT Semiconductors. ENCODE RULE (A).Bit ormat (W is used for function codes,w for start codes) KHz W KHz 0% Duty cycle W 00Hz % Duty cycle (B).Date ormat W W W W (n) X W W W W W (n) X W W W W W W W W W W W W W W W n-th start code nxw function code word W W W W Number Of unction Code (N) W unction Key Decode Result End Code 0 orward orward orward & Turbo orward Turbo Turbo Turbo & orward & Left orward & Left Turbo & orward & Right orward & Right 0 Backward Backward Backward & Right Backward & Right Backward & Left Backward & Left Left Left Right Right 00.0.
6 Semiconductors. ENCODE/DECODE TIMING Any function key Encode output st word nd word rd word end code Decode output ms ms SI ms (n) W ms ms Decode output T T=ms+(nW)xms TESTING CIRCUIT (The oscillator frequency of TX-B, RX-B is KHz, the oscillator resistor is 0KΩ and 0KΩ respectively) forward VCC=V 00 fosc=khz 0 TX-B RX-B turbo backward 0 left right backward forward turbo fosc=khz right left 00.0.
7 Semiconductors TYPICAL APPLICATION CIRCUIT TRANSMITTER Rosc=00k 0 SI VCC R.. CIRCUIT TX-B left right backward forward turbo RECEIVER 00 0 power switch.v RX-B VCC R.. CIRCUIT 00k 00.0.
8 Semiconductors INRARED APPLICATION CIRCUIT TRANSMITTER DC:V 00 fosc=khz 0 TX-B Photo Diode ~. Left Right Backw ard rontwar d Turbo C00 RECEIVER DC:V 0 00K 00 RX-B OUT VDD IR Receiver fosc=khz 00.0.
9 Semiconductors RECOMMENDED APPLICATION CIRCUIT R L LED VDD=V.k B TX-B Rosc=0K 0 0k XTAL MHz L. H P 0P L. H P L. H L TURBO 0 0P.0V Q C 00 P K P Q C 00 0P T 0.mm ( ) x mm(core) P 0P C 0P L.. 0 C P Q 0k R C 0P C P P T 0.mm ( ) x mm(core).k 0.k /V L.0V VDD=V,R=0 VDD=V,R=0 0 /V N Q: C0,C,C0,C Q,Q,Q: 0,C0,B Q,Q: C00,0,D Q,Q: B,C0,B Q,Q0: D,C00,D Q 00 /V 0P VDD 0P P.k.MO 0P 0P 0 0P 0.M k R C k C ko Q Q M P Q Q C R VDD Rosc=0K RX-B turbo R,R,R,R=0~0,are changeable with the VDD and VDD. right forward left 0 backward R Q Q R k k C M C Q P Q
10 Semiconductors PACKAGE OUTLINE DIP UNIT: mm. 0..B B.B0.. degree 0.MIN.00MIN.MAX 0.B0.0.0MAX DIP UNIT: mm. 0..B B.B0.. degree 0.MIN.00MIN.MAX 0.B0. 0.B0.0.MAX
11 This datasheet has been downloaded from: ree Download Daily Updated Database 00% ree Datasheet Search Site 00% ree IC Replacement Search Site Convenient Electronic Dictionary ast Search System All Datasheets Cannot Be Modified Without Permission Copyright Each Manufacturing Company
深圳市高地电子有限公司 EC HIGHLAND (SHENZHEN) ELECTRONICS CO., LTD TX2/RX2
REMOTE CONTROLLER WITH FIVE FUNCTIONS General Description The are a pair of CMOS LSIs designed for remote controlled car applications. TX2 Is the transmitter and RX2 is the receiver. They provide five
More informationUNISONIC TECHNOLOGIES CO., LTD RCT2E
UNISONIC TECHNOLOGIES CO., LTD RCT2E EODER FOR REMOTE CONTROLLER WITH FIVE FUTIONS SOP-8 DESCRIPTION The UTC RCT2E can be used with the decoder UTC RCR2C to provide a complete control functions to the
More informationPT8A977B/978B/978BL 5-Function Remote Controller. Features. Description. Ordering Information
Features PT8A977B works as encoder and PT8A978B/ 978BL works as decoder Five pins for five control functions Operating power-supply voltage: 2.5V to 5.0V (978B), 2.0V to 5.0V (978BL), 1.8V to 5.0V(977B)
More informationFeatures. General Description. Ordering Information. Data Sheet PT8A977P/977W/978P/978LW 5-Function Remote Controller
Features PTAP/W works as encoder and PTAP/LW works as decoder Five pins for five control functions Operating power-supply voltage:.v to.0v (P, W, P),.0V to.0v (LW) Auto-power-off if no press on any button
More informationOutput format same as L, except that when HP1 or HP2 is active, it will clear CP1. VDD GND OSC. Rx IN HP1 CODE 2 HP2 SC9149AL/ 9149AHN HP3 HP4 SP2
INFRARED REMOTE CONTROL RECEIVER DESCRIPTION The are CMOS LSIs designed for use on the infrared remote control receiver, and when this LSI is used in combination with SC9148A for transmitter, the remote
More informationFEATURES DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PT2262 Remote Control Encoder
Remote Control Encoder DESCRIPTION PT2262 is a remote control encoder paired with PT2272 utilizing CMOS Technology. It encodes data and address pins into a serial coded waveform suitable for RF or IR modulation.
More informationRF: RF Applicatant, normally omitted IR: IR Applicatant S: SOP-20 Package D: DIP-20 Package Omitted: DIP-18 Package SC Pin.
REMOTE CONTROL ENCODER DESCRIPTION The is a remote control encoder paired with SC5272 utilizing CMOS technology. It encodes data and address pins into a serial coded waveform suitable for RF or IR modulation.
More informationFEATURES DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PT2272 Remote Control Decoder
Remote Control Decoder DESCRIPTION PT2272 is a remote control decoder paired with PT2262 utilizing CMOS Technology. It has 12-bit of tri-state address pins providing a maximum of 531,441 (or 312) address
More informationOutput format same as L, except that when HP1 or HP2 is active, it will clear CP1. VDD GND. Rx IN OSC HP1 CODE 2 HP2 SC9149AL/ 9149AHN HP3 HP4 SP2
INFRARED REMOTE CONTROL RECEIVER DESCRIPTION The are CMOS LSIs designed for use on the infrared remote control receiver, and when this LSI is used in combination with SC4A for transmitter, the remote control
More informationDigital Proportional Remote Controller. Digital proportional Remote Controller. Application Notes. Page 1
查询 PT8A995P 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 Digital Proportional Remote Controller Digital proportional Remote Controller Application Notes Page 1 Why proportional control Simple action control Proportional
More information3 12 Series of Encoders
Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low standby current Minimum transmission word: Four words for TE trigger One word for Data trigger Applications Burglar
More informationPrinceton Technology Corp.
is a remote control decoder paired with PT2260 or PT2262 utilizing CMOS Technology. It has 12 bits of tri-state address pins providing a maximum of 531,441 (or 3 12 ) address codes; thereby drastically
More informationRemote Control Encoder
DESCRIPTION is a remote control encoder utilizing CMOS Technology specially designed for use with the PT2128. Using a special coding technique, increases noise immunity to a very great extent. It is housed
More informationNT Tone Dialer. Features. General Description. Pin Configuration & Keyboard Assignments
Tone Dialer Features Wide Supply Voltage Range: 1.8V to 5.5V Ceramic oscillator (480KHz ceramic resonator) Fully debounced scanning keyboard Minimum tone duration: 73ms Very low tone distortion: less than
More informationAgamem Microelectronics Inc.
DESCRIPTION The is a low operation voltage FM IF detector IC. It includes IF circuit, FM detector circuit, RSSI circuit, and noise detector circuit. It is suitable for cordless phones. FEATURES Operating
More informationRemote Control Encoder IC
DESCRIPTION is a remote control encoder paired with PT2294 utilizing CMOS Technology. It encodes data and address pins into a serial coded waveform suitable for RF modulation. has a maximum of 12-bit of
More information8-bit shift register and latch driver
8-bit shift register and latch driver The BU2114 and BU2114F are CMOS ICs with low power consumption, and are equipped with an 8-bit shift register latch. Data in the shift register can be latched asynchronously.
More informationMOSA ELECTRONICS. Features. Description. MS8870 DTMF Receiver
Features Complete DTMF receiver Low power consumption Adjustable guard time Central Office Quality CMOS, Single 5V operation Description O rdering Information : 18 PIN DIP PACKAGE The is a complete DTMF
More informationST12 CODEC IR/RF Remote Control Encoder/Decoder IC 1. Overview
ST CODEC / Remote Control Encoder/Decoder IC. Overview ST CODEC is Radio Frequency and Infrared encoder/decoder IC for remote control applications having unique features and flexibility not available with
More informationHT8950 Voice Modulator
Voice Modulator Features Operating voltage: 2.4~4.0V On-chip SRAM Robot function Vibrato function 8kHz sampling rate 7-step level shifting Applications Toys Mixers Recorders General Description The HT8950
More informationQuad Ground Sense Operational Amplifier. The CO324 is monolithic IC with four built-in operational amplifiers featuring internal phase compensation.
The CO4 is monolithic IC with four built-in operational amplifiers featuring internal phase compensation. Either a dual or single power supply can be driven, and these products can be driven by a digital
More informationNJU6434C 1/4 DUTY LCD DRIVER PRELIMINARY ! GENERAL DESCRIPTION ! PACKAGE OUTLINE ! FEATURES ! BLOCK DIAGRAM
PRELIMINARY 1/4 DUTY LCD DRIVER! GENERAL DESCRIPTION The NJU6434 is a 1/4 duty LCD driver for segment type LCD panel. The LCD driver consists of 4-common and 50-segment drives up to 200 segments. The NJU6434
More informationIRM-8607K-2. Infrared Remote Control Receiver Module. Features. Description. Applications. Block Diagram. Application Circuit
Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity against
More informationInfrared Receiver Module IRM-36XXM3 Series
Block Diagram Pin Configuration 1 2 3 1: Vout 2: GND 3: Vcc Features High protection ability against EMI Circular lens for improved reception characteristics Available for various carrier frequencies min
More informationLSI/CSI LS7560N LS7561N BRUSHLESS DC MOTOR CONTROLLER
LSI/CSI LS7560N LS7561N LSI Computer Systems, Inc. 15 Walt Whitman Road, Melville, NY 747 (631) 71-0400 FAX (631) 71-0405 UL A3800 BRUSHLESS DC MOTOR CONTROLLER April 01 FEATURES Open loop motor control
More informationMP3P, MP3 phone, GPS, CD changer, notebook PC, car TV, electronic dictionary, portable DVD and portable multimedia players(pmp), etc.
DESCRIPTION The is a high performance FM transmitter designed for portable multimedia systems. It includes stereo modulator and FM transmitter incorporated with oscillator circuits. This device employs
More informationHT162X HT1620 HT1621 HT1622 HT16220 HT1623 HT1625 HT1626 HT1627 HT16270 COM
RAM Mapping 328 LCD Controller for I/O C Features Operating voltage: 2.7V~5.2V Built-in RC oscillator 1/4 bias, 1/8 duty, frame frequency is 64Hz Max. 328 patterns, 8 commons, 32 segments Built-in internal
More informationDual operational amplifier
Dual operational amplifier The BA8, BA8F, and BA8N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These
More informationQuad ground sense operational amplifier
Quad ground sense operational amplifier BAA / BAAF / BAAFV The BAA, BAAF, and BAAFV are monolithic ICs with four built-in operational amplifiers featuring internal phase compensation. Either a dual or
More informationDUAL OP AMP AND VOLTAGE REFERENCE General Description. Features
General Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and
More informationQuad operational amplifier
Quad operational amplifier BA7 / BA7F The BA7 and BA7F are monolithic ICs with four operational amplifiers featuring internal phase compensation mounted on a single silicon chip. Either a dual or single
More information10A Current Mode Non-Synchronous PWM Boost Converter
10A Current Mode Non-Synchronous PWM Boost Converter General Description The is a current mode boost DC-DC converter. It is PWM circuitry with built-in 15mΩ power MOSFET make this regulator highly power
More informationIP102. Dual OPAmp-Dual Comparator and Adj. Shunt Regulator DESCRIPTION FEATURES ORDERING INFORMATION BLOCK DIAGRAM
DESCRIPTION The IP102/A is a monolithic IC that includes two operational amplifiers, two comparators and an adjustable shunt regulator. This device is offering space and cost saving in many applications
More informationFX623 FX623. CML Semiconductor Products PRODUCT INFORMATION. Call Progress Tone Decoder
CML Semiconductor Products PRODUCT INFORMATION FX623 Call Progress Tone Decoder Features Measures Call Progress Tone Frequencies [ Busy, Dial, Fax-Tone etc.] Telephone, PABX, Fax and Dial-Up Modem Applications
More informationOne-Decimal Clinical Thermometer
Features Single-chip CMOS construction Measurement range: 32.0 ~42.9 C (90 F ~109.9 F) Measurement accuracy: ±0.1 C(±0.2 F) Resolution: 0.1 C (0.1 F) Single 1.5V battery operation Highest temperature hold
More informationNJM2344. PWM DC/DC Converter IC with Standby Function FEATURES
PWM DC/DC Converter IC with Standby Function GENERAL DESCRIPTION The NJM344 is a general purpose PWM DC/DC converter IC configurable for step-up, step-down and inverting applications. An internal.a power
More information4-CH BTL DRIVER FOR CD PLAYER WITH 3.3V OUTPUT VOLTAGE
4-CH BTL DRIVER FOR CD PLAYER WITH 3.3V OUTPUT VOLTAGE DESCRIPTION The SA1469PH, an IC for CD players, has a 4-channel BTL driver, 3.3V regulator (attached PNP transistor required), standard operational
More informationPWM DC/DC CONVERTER IC
NJMA PWM DC/DC CONVERTER IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJMA is a PWM DC/DC converter IC. It features fixed frequency type PWM control for better noise handling and to avoid intermittent oscillation
More informationPWM Controlled, PWM/PFM Switchable Step-up DC/DC Controllers
XC6367/XC6368 Series ETR0401_005 PWM Controlled, PWM/PFM Switchable Step-up DC/DC Controllers GreenOperation-Compatible GENERAL DESCRIPTION The XC6367/XC6368 series are multi-functional step-up DC/DC controllers
More informationHT12A/HT12E 2 12 Series of Encoders
2 2 Series of Encoders Features Operating voltage 2.4V~5V for the HT2A 2.4V~2V for the HT2E Low power and high noise immunity CMOS technology Low standby current: 0.A (typ. at V DD =5V HT2A with a 38kHz
More informationSIGNAL LEVEL SENSOR SYSTEM
SIGNAL LEVEL SENSOR SYSTEM GENERAL DESCRIPTION The NJU7181 is a signal level sensor system IC. It sends a High flag to the microprocessor or other equipments whenever it detects the existence of the audio
More informationMM Stage Oscillator Divider
MM5369 17 Stage Oscillator Divider General Description The MM5369 is a CMOS integrated circuit with 17 binary divider stages that can be used to generate a precise reference from commonly available high
More informationFP A Current Mode Non-Synchronous PWM Boost Converter
10A Current Mode Non-Synchronous PWM Boost Converter General Description The is a current mode boost DC-DC converter. It is PWM circuitry with built-in 15mΩ power MOSFET make this regulator highly power
More informationINTRODUCTION FEATURES ORDERING INFORMATION APPLICATIONS LOW POWER DTMF RECEIVER 18 DIP 300A
LOW POWER DTMF RECEIVER INTRODUCTION The is a complete Dual Tone Multiple Frequency (DTMF) receiver that is fabricated by low power CMOS and the Switched- Capacitor Filter technology. This LSI consists
More informationInfrared Receiver Control Receiver Module IRM-36xxM3 Series
IRM-36xxM3 Series Block Diagram Pin Configuration 1 2 3 1. OUT 2. GND 3. V CC Features High protection ability against EMI Circular lens for improved reception characteristics Available for various carrier
More informationunit: mm 3159-QFP64E unit: mm 3190-SQFP64
Ordering number : EN*4965 CMOS LSI LC75741E, 75741W 1/2 Duty VFD Driver for Frequency Displays Preliminary Overview The LC75741E and LC75741W are 1/2 duty VFD drivers for use in electronic tuning frequency
More informationHT7660. CMOS Switched-Capacitor Voltage Converter. Features. Applications. General Description. Block Diagram
CMOS Switched-Capacitor Voltage Converter Features Simple conversion of V DD to V DD Cascade connection (two devices are connected V OUT = 2 V DD ) Boost pin for higher switching frequency Easy to use
More information3 12 Series of Decoders
Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low standby current Capable of decoding 12 bits of information Pair with Holteks 3 12 series of encoders 8~12 address
More informationHT12D/HT12F 2 12 Series of Decoders
2 12 Series of Decoders Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low standby current Capable of decoding 12 bits of information Binary address setting Received
More informationLow Power Consumption IPS009BL9_BL9A_BLAA AT Cut 32KHz SPXO
Description IPS009BL9, IPS009BL9A and is the specific SPXO IC for achieving 32KHz output by divide, corresponding to the fundamental crystal from 14MHZ to 27MHz and 33.554MHz corresponding to each IC.
More informationAP1511A / B IR Filter Switch Driver
AP1511A / B with one-shot output for IR-Cut Removable (ICR) ANAPEX TECHNOLOGY INC. 2F -1, No.5, Tai-Yuen 1st St., Jhubei City, Hsinchu 30265, Taiwan, R.O.C. Agent: AENEAS ELECTRONICS CO.,LTD. Tel: +886-2-87974259
More informationIRM X. Infrared Remote Control Receiver Module. Release Date: :04:18.0 Expired Period: Forever. Features. Description.
Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies. Low voltage and low power consumption. High immunity against
More informationAPPLICATIONS GENERAL DESCRIPTION FEATURES PIN CONFIGURATION PIN ASSIGNMENT /INH, Q0 PIN FUNCTION
CMOS Oscillation Frequency : 125MHz (MAX.) 3-State Output Built-in Oscillation Capacitor Built-in Oscillation Feedback Resistor Mini Mold SOT-26 Package APPLICATIONS Crystal Oscillation Modules Computer,
More informationInfrared Receiver Module EAIRMAA0
Block Diagram Pin Configuration 1. OUT 2. GND 3. V CC 1 2 3 Features High protection ability against EMI Circular lens for improved reception characteristics Available for Carrier Frequencies between 30KHz
More informationPrinceton Technology Corp.
DESCRIPTION is an electronic volume controller IC utilizing CMOS Technology specially designed for use on audio equipments. It has two () built-in channels making it ideally suitable for mono and stereo
More informationELECTRONIC GIANT. EG4002 Datasheet. PIR Controller. Copyright 2012 by EGmicro Corporation REV 1.0
ELECTRONIC GINT EG400 Datasheet PIR Controller REV 1.0 Contents 1. Features.... General Description.... pplications... 4. Device Information... 4 4.1. Pin map... 4 4.. Pin Functions... 4 5. Block Diagram...
More informationLSI/CSI LS7290 STEPPER MOTOR CONTROLLER. LSI Computer Systems, Inc Walt Whitman Road, Melville, NY (631) FAX (631)
LSI/CSI UL A800 FEATURES: LSI Computer Systems, Inc. 1 Walt Whitman Road, Melville, NY 114 (1) 1-0400 FAX (1) 1-040 STEPPER MOTOR CONTROLLER Controls Bipolar and Unipolar Motors Cost-effective replacement
More informationFA5310BP(S), FA5314P(S), FA5316P(S) FA5311BP(S), FA5315P(S), FA5317P(S)
0.05 FA531X series series Bipolar IC For Switching Power Supply Control FA5310BP(S), FA5314P(S), FA5316P(S) FA5311BP(S), FA5315P(S), FA5317P(S) Description The FA531X series are bipolar ICs for switching
More informationUCS Channel LED Driver / Controller
GENERAL DESCRIPTION 3-Channel LED Driver / Controller The UCS1903 is a 3-channel LED display driver / controller with a built-in MCU digital interface, data latches and LED high voltage driving functions.
More informationHT6P237A/HT6P247A Learning RF Encoder
Learning RF Encoder Features Operating voltage: 2.0V ~3.6V Average Operating Current: 20mA @ VDD=3.0V 12dBm; 30mA @ VDD=3.0V 16dBm Standby current: 1.0μA (Max.) @ VDD=3V HT6P237A codes are fully compatible
More informationInfrared Remote Control Receiver Module IRM-2638T
Block Diagram 1 2 3 Pin Configuration 1. OUT 2. GND 3. V CC IN Carrier frequency f0 Input Oscillator CGA & filter Vs Demodulator AGC/ATC & digital control OUT µc Features Modulated IR signal min 10 pulses
More informationPIN DESCRIPTION Pin Name I/O Description Pin No. Operation voltage 5V Stand by current 80~90uA 1 I = 1M 4 System ground. 5 I Connect to a for inhibit,
GENERAL DESCRIPTION The is a low power PIR ( passive infrared ) controller with hi level output, paired with M3766 for battery power door bell/ relay /alarm application. With special noise immunity technique,
More informationFor Power Supply Applications. Switching Regulator Controller
FUJITSU SEMICONDUCTOR DATA SHEET DS04-27201-4E ASSP For Power Supply Applications Switching Regulator Controller MB3776A DESCRIPTION MB3776A is a PWM system switching regulator controller. Because of its
More informationInfrared Receiver Module IRM-36xxM Series
Block Diagram Pin Configuration 1 2 3 1. OUT 2. GND 3. Vcc Features High protection ability against EMI Circular lens for improved reception characteristics Available for various carrier frequencies Min
More informationTechcode TD8215. Step-up DC/DC Controller. General Description. Features. Applications. Pin Configurations DATASHEET TD8215 INV SCP VDD CTL
General Description Features The is a single PWM, step up DC DC controller with low operating voltage application integrating softstart and short circuit detection function. The oscillator switching frequency
More informationLow-Cost, Mono/Stereo, 1 W Differential Audio Power Amplifiers
Low-Cost, Mono/Stereo, 1 W Differential Audio Power Amplifiers General Description The is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication
More informationHI-8200, HI-8201, HI-8202
November 2017 GENERAL DESCRIPTION HI8200, HI8201, HI8202 Quad 10 Ohm /12V outsidetherails Analog Switch with Open Circuit when Power Off EATURES The HI8200 is a quad analog CMOS switch fabricated with
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS
More informationTechnical Data Sheet Infrared Remote-control Receiver Module
Technical Data Sheet Infrared Remote-control Receiver Module Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center carrier frequencies.
More informationInfrared Receiver Control Receiver Module EAIRMJA0 & EAIRMJA2
Block Diagram Features 1 2 3 4 Pin Configuration 1. GND 2. Vcc 3. Out 4. GND High protection ability against EMI Available for various carrier frequencies Min burst length: 8 cycles Min gap length: 12
More informationDATA SHEET. HEF4541B MSI Programmable timer. For a complete data sheet, please also download: INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC04 LOCMOS HE4000B Logic Family Specifications HEF, HEC The IC04 LOCMOS HE4000B Logic Package Outlines/Information HEF,
More informationHT9172 DTMF Receiver. Features. General Description. Block Diagram
DTMF Receiver Features Operating voltage 2.5V~5.5V Minimal external component requirements No external filter required Low standby current in power down mode) Excellent performance Tristate data output
More informationInfrared Receiver Module IRM-66XXN3 Series
Block Diagram Pin Configuration 1: Vout 2: GND 3: Vcc Features High protection ability against EMI Circular lens for improved reception characteristics Available for various carrier frequencies Low operating
More informationHI-8190, HI-8191, HI , Quad, SPST, 3.3V / 5.0V compatible Analog Switch
October 2017 GENERAL DESCRIPTION HI-8190, HI-8191, HI-8192 12, Quad, SPST, 3.3V / 5.0V compatible Analog Switch EATURES The HI-8190 is a quad analog CMOS switch fabricated with Silicon-on-Insulator (SOI)
More informationUNISONIC TECHNOLOGIES CO., LTD 1812A/1812B/1813
UNISONIC TECHNOLOGIES CO., LTD 2A/2B/ SINGLE SOUND GENERATOR DESCRIPTION The UTC 2A/2B/ is a CMOS LSI chip designed for use in sound effect products.it is equipped with tone circuit, noise circuit and
More informationHT600/680/ Series of Encoders
3 18 Series of Encoders Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low standby current Three words transmission Built-in oscillator needs only 5 resistor Applications
More informationULTRA-WIDEBAND DIFFERENTIAL VIDEO AMPLIFIER PACKAGE OUTLINE
FEATURES BANDWIDTH AND TYPICAL GAIN 12 MHz at AVOL = 3 17 MHz at AVOL = 7 MHz at AVOL = ULTRA-WIDEBAND DIFFERENTIAL VIDEO AMPLIFIER VERY SMALL PHASE DELAY GAIN ADJUSTABLE FROM TO 3 NO FREQUENCY COMPENSATION
More informationPT2240B Encoder IC. has. High noise immunity. data codes into application. 4 Data pins. Car/Garage BLOCK
Encoder IC DESCRIPTION PT2240B is encoder utilizing CMOS Technology specially designed for remote control applications. It has 2 20 Address. It can support up to 4 Data Bits and is housed in 8 pin SOP
More informationHT604L/HT614/HT Series of Decoders
3 18 Series of Decoders Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low standby current Capable of decoding 18 bits of information 9~10 address pins 2~8 data
More informationESMT Preliminary EMD2080
Constant Current LED Lighting Driver With PWM Dimming Control General Description The EMD2080 was designed with high efficiency step up DC/DC converter with constant current source for driving lighting
More informationAPPLICATIONS. FEATURES Maximum Output Current : 200mA (300mA Limit, TYP.)
Low Power Consumption:.8µA (TYP.) Range :.V ~.V Range :.9V ~.V Maximum Output Current: ma (ma Limit, TYP.) @ VOUT=.V, VIN=.V Current Limiter Circuit Built-In Ceramic Capacitor Compatible Small Packages
More informationHT12A/HT12E 2 12 Series of Encoders
2 2 Series of Encoders Features Operating voltage 2.4V~5V for the HT2A 2.4V~2V for the HT2E Low power and high noise immunity CMOS technology Low standby current:.a (typ. at V DD =5V HT2A with a 38kHz
More informationHigh Voltage and Temperature Auto Zero Op-Amp Cell Features Applications Process Technology Introduction Parameter Unit Rating
Analogue Integration AISC11 High Voltage and Temperature Auto Zero Op-Amp Cell Rev.1 12-1-5 Features High Voltage Operation: 4.5-3 V Precision, Auto-Zeroed Input Vos High Temperature Operation Low Quiescent
More informationHT9170B/HT9170D DTMF Receiver
DTMF Receiver Features Operating voltage 2.5V~5.5V Minimal external components No external filter is required Low standby current (on power down mode) Excellent performance Tristate data output for MCU
More informationELM824xA 3.0μA Very low power CMOS dual operational amplifier
ELM824xA 3.μA Very low power CMOS dual operational amplifier General description ELM824xA is a very low current consumption-typ.3.μa CMOS dual OP-AMP provided with a wide common mode input voltage range.
More informationMOS INTEGRATED CIRCUIT Bipolar Analog Integrated Circuit
DATA SHEET MOS INTEGRATED CIRCUIT Bipolar Analog Integrated Circuit µpc TIMER CIRCUIT The µpc is a powerful integrated circuit. Adding a few external parts to it can turn it into various types of timing
More informationRemote Control Decoder IC
V1.2-1 - April, 2006 查询 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 DESCRIPTION is a remote control decoder paired with PT2264 utilizing CMOS Technology. It has 12 bits of tri-state address pins providing a maximum
More informationA W CLASS AB BTL AUDIO POWER AMPLIFIER EXTERNAL GAIN CONFIGURATION CAPABILITY
DESCRIPTION The is a Class-AB audio power amplifier designed for mobile phones and other portable communication devices. It is capable of delivering 1.28 watts of continuous average power to an 8Ω BTL
More informationLSI/CSI LS7232NT PROXIMITY/TOUCH CONTROL HALOGEN LAMP DIMMER
LSI/CSI LS7232NT UL LSI Computer Systems, Inc. 1235 Walt Whitman Road, Melville, NY 11747 (631) 271-0400 FAX (631) 271-0405 A00 PROXIMITY/TOUCH CONTROL HALOGEN L DIMMER FEATURES: Control of incandescent
More informationCA555, CA555C, LM555, LM555C, NE555
May 99 SEMICONDUCTOR CA, CAC, LM, LMC, NE Timers for Timing Delays and Oscillator Application in Commercial, Industrial and Military Equipment Features Accurate Timing From Microseconds Through Hours Astable
More information3 18 Series of Encoders
Features Operating voltage: 2.4V~12V Low power and high noise immunity CMOS technology Low standby current Three words transmission Applications Burglar alarm system Smoke and fire alarm system Garage
More informationSPG Monolithic Event Detector Interface SP42400P
SPG Monolithic Event Detector Interface SP42400P General description: The SP42400P is a monolithic device fabricated in CMOS technology. Its generic function is to detect low to medium frequency, low voltage
More informationTechnical Data Sheet Infrared Remote-control Receiver Module
Technical Data Sheet Infrared Remote-control Receiver Module Features : Photo detector and preamplifier in one package Internal filter for PCM frequency Improved shielding against electrical field disturbance
More informationOCP2030 SWITCHING BUCK REGULATOR
General Description The OCP2030 is a buck topology of switching regulator for wide operating voltage applications field. The OCP2030 includes a high current P-MOSFET, high precision reference (0.5V) for
More informationHT7610A/HT7610B/HT7611A/HT7611B General Purpose PIR Controller
General Purpose PIR Controller Features Operating voltage: 5V~12V ON/AUTO/OFF selectable by MODE pin Standby current: 100A (Typ.) On-chip regulator Adjustable output duration CDS input Override function
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Infrared Remote control Receiver Module Own Inner Shield Features High protection ability against EMI. Circular lens to improve the receive characteristic. Line-up for various center
More informationSingle-phase DC Brushless Motor Driver IC
Single-phase DC Brushless Motor Driver IC GENERAL DESCRIPTION PACKAGE OUTLINE The NJU7357 is single-phase DC brushless motor driver IC. And It features MOS-FET driver circuit for better output characteristics.
More informationKA7500C. SMPS Controller. Features. Description. Internal Block Diagram.
SMPS Controller www.fairchildsemi.com Features Internal regulator provides a stable 5V reference supply trimmed to ±1 % Accuracy. Uncommitted output TR for 200mA sink or source current Output control for
More informationInfrared Receiver Module IRM-66XXN3S45 Series
Block Diagram Pin Configuration 1 2 3 1: Vout 2: GND 3: Vcc Features High protection ability against EMI Circular lens for improved reception characteristics Available for various carrier frequencies Low
More informationS-8120AMP LOW-VOLTAGE C-MOS HIGH-PRECISION TEMPERATURE SENSOR IC. Rev.1.1
Rev.. LOW-VOLTAGE C-MOS HIGH-PRECISION TEMPERATURE SENSOR IC The is a high-precision temperature sensor IC that outputs voltage with a temperature coefficient of -8.5mV/ C and a temperature accuracy of
More information