RF ATTENUATORS COAXIAL DC 22 GHz DETAIL SPECIFICATION
|
|
- Aldous Collins
- 5 years ago
- Views:
Transcription
1 16/08/016 REF.: RADDETATCH010 1/ 13 Titre / Title RF ATTENUATORS COAXIAL DC GHz Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 16/08/016 Vérifié par / Verified by V. EUDELINE Space B. U. Manager 16/08/016 Approuvée par / Approved by C. DAVENEL Space Quality Manager 16/08/016
2 16/08/016 REF.: RADDETATCH010 / 13 DOCUMENTATION CHANGE NOTICE REVISION OR ISSUE 1/ 1/A 1 / B DATE March 8 th, 013 April 5 th, 013 August 16 th, 016 CHANGE Initial issue: Updated for flatness: xxdb/1ghz instead of xxdb/ghz Updated note 3 of Table and replace Attenuation drift by Temperature coefficient of attenuation in Table 6, climatic sequence
3 16/08/016 REF.: RADDETATCH010 3/ 13 TABLE OF CONTENTS 1. Scope 4. Applicable document 4 3. Type variant 5 4. Maximum ratings 6 5. Electrical measurements 7 6. Connectors repeatabilty: 7 7. Operating life Parameter drift values Conditions for operating life 7 8. Mechanical dimension Dimension for variants 01 to Interchangeability for SMA SMA jack SMA plug 11 LIST OF TABLES AND FIGURES : Type variants... 5 Table : Maximum ratings... 6 Table 3: Parameter drift values for Operating Life... 7 Table 4: Conditions for Operating Life testing... 7 Table 5: Radiall Part Number... 1 Table 6 : Measurements and inspections on completion of environment and endurance tests... 1 FIGURE 1 Temperature derating... 6 FIGURE Circuit for electrical measurement... 8
4 16/08/016 REF.: RADDETATCH010 4/ SCOPE This Detail Technical Sheet details the ratings and electrical characteristics for RF Attenuators, Coaxial 030 db, 0 GHz. APPLICABLE DOCUMENT The following documents shall be read in conjunction with this specification: RADGENATCH00: General Specification: Attenuators and Loads RF Fixed Coaxial
5 16/08/016 REF.: RADDETATCH010 5/ TYPE VARIANT Variant of the basic type covered by the relevant Generic Specification are given. Var. N : Type variants Attenuation Maximum Input Power Attenuation tolerance Vs frequency Flatness VSWR db W 0 < F 18 GHz db (±) 18 < F GHz db (±) db (DC shunt) F 13 GHz 0.05 db/1 GHz F > 13 GHz 0.07 db/1 GHz F 13 GHz 0.07 db/1 GHz F > 13 GHz 0.1 db/1 GHz 0 < F 18.4 GHz < < F < GHz < 1.5
6 16/08/016 REF.: RADDETATCH010 6/ MAXIMUM RATINGS Maximum Ratings of the basic type covered by the relevant Generic Specification are given Table. Table : Maximum ratings N Characteristics Symbol Maximum Rating Unit Comment Min Max 1 RF Power dissipation (1) P W () Peak Power (at 5 C) (3) Pp 100 W 3 Operating Temperature Range T op C 4 Storage Temperature Range T stg C 5 Frequency Range F 0 GHz 6 Impedance Z Ω 7 DC impedance 4 10 KΩ between coaxial line and body 8 RF Leakage E 85 dbi 9 Coupling Nut Torque Tq N.cm 10 Glitches db NOTES: (1) See for RF input Power value vs attenuation () See Figure 1. (3) Duration 1µs, 1% duty cycle RF POWER (W) 100 % of RF power FIGURE 1 Temperature derating 5 % of RF power 55 C +70 C +5 C +15 C RF POWER VERSUS TEMPERATURE Ambient Temp( C)
7 16/08/016 REF.: RADDETATCH010 7/ ELECTRICAL MEASUREMENTS The parameters to be measured at room temperature are scheduled in. Unless otherwise specified, the measurements shall be performed at T amb = + ± 3 C. The measurement shall be performed with five points of frequency: 4GHz 8GHz 1.4 GHz 18GHz and GHz. 6. CONNECTORS REPEATABILTY: The test shall be performed according to the following conditions: Attenuation shall be recorded at three points of frequency : 4GHz 1.4GHz and GHz Ten complete engagements and separations shall be performed, both end separately Attenuators shall be rotated through the full 360 with an increment of approximately 36 for each engagement. Attenuation drift value : ±0.05 db Side thrust is not permitted during the test Cleaning of connetcors or reshaping of contacts was not permitted during the sequence 7. OPERATING LIFE 7.1. PARAMETER DRIFT VALUES The parameter drift values applicable to burnin are specified in Table 3 of this specification. Unless otherwise stated, measurements shall be perfromed at T amb = + ± 3 C. The parameter drift value ( ) applicable to the parameters scheduled, shall not be exceeded. In additional to these drift value requirements for a given parameter, the appropriate limit value specified in shall not be exceeded. 7.. CONDITIONS FOR OPERATING LIFE The condition for Operating life are given in Table 4. After test, a visual inspection shall be performed and no damage shall be appeared. Table 3: Parameter drift values for Operating Life N Characteristics Symbol Test condition Limits Unit 1 Attenuation Drift Att As per ±0.10 or ±1 (1) db % NOTES: (1) Whichever is greater, % of nominal attenuation Table 4: Conditions for Operating Life testing N Characteristics Symbol Limits Unit Note 1 RF Power P in See W Frequency F DC (1) or 10 or or 18 GHz GHz For attenuation 1dB For attenuation < 1dB 3 Ambient Temperature T amb +5 C NOTES: (1) The response of the attenuation is flat over the frequency bandwidth. The dissipated power at DC or in frequency is the same.
8 16/08/016 REF.: RADDETATCH010 8/ 13 Test mounting for Operating life: The DUT (attenuator under test) shall be mounted directly on the Hybrid coupler without SR cable between the coupler and the DUT. FIGURE Circuit for electrical measurement Z X Y Attenuator 169,3 ±0,5 (between ref. planes) Schematic for Vibration and Shock or Bump test
9 16/08/016 REF.: RADDETATCH010 9/ MECHANICAL DIMENSION 8.1. DIMENSION FOR VARIANTS 01 TO 31 Connectors: Weight: SMA male/female per ESCC340 5 grams
10 16/08/016 REF.: RADDETATCH010 10/ SMA jack 8.. INTERCHANGEABILITY FOR SMA Symbol Millimetres notes min max a 5.54 b 4.3 c d e g h J 0.00 K.9 I 0.04 radius
11 16/08/016 REF.: RADDETATCH010 11/ SMA plug Symbol Millimetres notes min max a 3.43 b.54 c d 59 e 6.35 f 008 Radius or 45 Chamfer g h 0.00 j.54 k 8 I m 1.7 n 8 p 3.17 q N/A r Hexagonal on flat s 9.0
12 16/08/016 REF.: RADDETATCH010 1/ 13 Table 5: Radiall Part Number Variant Radiall Reference Designation 01 R Attenuator SMA DC GHz 0 db 0 R Attenuator SMA DC GHz db 03 R Attenuator SMA DC GHz 1 db 04 R Attenuator SMA DC GHz 1.5 db 05 R Attenuator SMA DC GHz db 06 R Attenuator SMA DC GHz.5 db 07 R Attenuator SMA DC GHz 3 db 08 R Attenuator SMA DC GHz 3.5 db 09 R Attenuator SMA DC GHz 4 db 10 R Attenuator SMA DC GHz 4.5 db 11 R Attenuator SMA DC GHz 5 db 1 R Attenuator SMA DC GHz 5.5 db 13 R Attenuator SMA DC GHz 6 db 14 R Attenuator SMA DC GHz 6.5 db 15 R Attenuator SMA DC GHz 7 db 16 R Attenuator SMA DC GHz 7.5 db 17 R Attenuator SMA DC GHz 8 db 18 R Attenuator SMA DC GHz 8.5 db 19 R Attenuator SMA DC GHz 9 db 0 R Attenuator SMA DC GHz 9.5 db 1 R Attenuator SMA DC GHz 10 db R Attenuator SMA DC GHz 11 db 3 R Attenuator SMA DC GHz 1 db 4 R Attenuator SMA DC GHz 13 db 5 R Attenuator SMA DC GHz 14 db 6 R Attenuator SMA DC GHz 15 db 7 R Attenuator SMA DC GHz 16 db 8 R Attenuator SMA DC GHz 17 db 9 R Attenuator SMA DC GHz 18 db 30 R Attenuator SMA DC GHz 19 db 31 R Attenuator SMA DC GHz 0 db
13 16/08/016 REF.: RADDETATCH010 13/ 13 TABLE 6 : Measurements and inspections on completion of environment and endurance tests N Radiall Generic Spec. RADGENATCH00 Environmental and Test Method and Endurance Test (1) Conditions 01 Vibration Para and figure of this specification 0 Shock or Bump Para and figure of this specification 03 Rapid Change of Temperature Para Climatic sequence Para Dry heat : para Cold heat : para Measurements and Inspections Symbol Limits Unit Identification Conditions Min Max Initial measurements Attenuation During Last Cycle Intermittent contact Final measurement Visual Examination Attenuation drift Initial measurements Attenuation Final measurement Visual Examination Attenuation drift Initial measurements Attenuation Final measurement Visual Examination Attenuation drift Temp coeff of attenaution Temp coeff of attenaution Final measurement >ms No open or short circuits No damage No damage After recovery time of 4±hrs No damage At +15 C, Freq : and GHz At 55 C, Freq : and GHz After recovery time between 1 hr and 4 hrs No damage Att Att Att Att Att Att Att Att Record values ±0.05 ± Record values ±0.05 ± Record values Visual Examination Attenuation drift Att Coupling proof torque Para Interface dimensions Para Figure of para ±0.05 ± (3) (3) db or %() db or %() db or %() db/db/ C db/db/ C db or %() Para Torque Para N.cm 06 Mating and unmating forces 07 Connector Repeatability Para 6 of this specification Attenuation drift Att ± Operating Life Para and table 3 and 4 of this specification Initial measurements Attenuation Final measurement Visual Examination Attenuation drift Att ± Record values No damage Att ±0.10 db or ±1 %() 09 RF leakage Para RF leakage Para E 85 DB 10 Peak power Para and table of this specification 11 Permanence of marking Para Final measurement Visual Examination Final measurement Attenuation Att No corrosion or obliteration of marking Notes : (1) The tests in this table refer to either para 11 and 1 and shall be used as applicable () Whichever is greater (3) or ±0.1dB whichever is greater. db or %()
Date: December 10 th, Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS SMA 2.9 TYPE, 50 OHMS (FEMALE CONTACT)
REF. : RADDETCONN006 1/ 18 Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS SMA 2.9 TYPE, 50 OHMS (FEMALE CONTACT) Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space
More informationDate: April 27 th, 07. Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS SMA TYPE, 50 OHMS (FEMALE CONTACT)
REF. : RADDETCONN003 2 / 1/ 18 Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS SMA TYPE, 50 OHMS (FEMALE CONTACT) Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space
More informationRF COAXIAL PHASE SHIFTER SMA DC to 18 GHz DETAIL SPECIFICATION
1/ 35 Titre / Title RF COAXIAL PHASE SHIFTER SMA DC to 18 GHz DETAIL SPECIFICATION Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 04/12/2015 Vérifié
More informationDate: April 27 th, 04. Titre / Title HIGH RELIABILITY RF COAXIAL ADAPTORS AND CONNECTING PIECES SMA TYPE, 50 OHMS
1/ 21 Titre / Title HIGH RELIABILITY RF COAXIAL ADAPTORS AND CONNECTING PIECES SMA TYPE, 50 OHMS Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 27/04/07
More informationDate: May 17 th, 16. Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS SMP TYPE, 50 OHMS
1/ 20 Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS SMP TYPE, 50 OHMS Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 17/05/2016 Vérifié par
More informationRF COAXIAL CONNECTORS, BASED ON TYPE SMP. ESCC Detail Specification No. 3402/0xx
1/ 23 Titre / Title RF COAXIAL CONNECTORS, BASED ON TYPE SMP ESCC Detail Specification No. 3402/0xx Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager
More informationHIGH RELIABILITY SEMI-RIGID COAXIAL CABLE ASSEMBLIES
1/22 Titre / Title HIGH RELIABILITY SEMI-RIGID COAXIAL CABLE ASSEMBLIES Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 25/10/2016 Vérifié par / Verified
More informationCONNECTORS, ELECTRICAL, CIRCULAR, TRIPLE-START SELF-LOCKING COUPLING, SCOOP-PROOF, REMOVABLE CRIMP CONTACTS BASED ON MIL-C SERIES III
Page 1 of 24 CONNECTORS, ELECTRICAL, CIRCULAR, TRIPLE-START SELF-LOCKING COUPLING, SCOOP-PROOF, REMOVABLE CRIMP CONTACTS BASED ON MIL-C-38999 SERIES III ESCC Detail Specification Issue 6 October 2013 Document
More informationRADIALL DETAIL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE
1/ 8 RADIALL DETAIL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 19/08/2015 Vérifié par / Verified by
More informationDate: September 21 st, 17. Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS GENERIC SPECIFICATION
1/ 33 Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project manager 21/09/2017 Vérifié par / Verified by V
More informationRF, COAXIAL. HYBRID COUPLERS POWER DIVIDERS and DIRECTIONAL COUPLERS GENERIC SPECIFICATION
1/ 23 Titre / Title RF, COAXIAL HYBRID COUPLERS POWER DIVIDERS and DIRECTIONAL COUPLERS GENERIC SPECIFICATION Written by Responsibility Date Signature P. THIBAUD Space Project manager 29/01/10 Verified
More informationRADIALL DETAIL SPECIFICATION FOR SHF COAXIAL CABLE ASSEMBLY
DETAL SPECFCATON 1/9 RADALL DETAL SPECFCATON FOR COAXAL CABLE ASSEMBLY Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POZAT Space Project Manager 24/10/2012 Vérifié par / Verified
More informationRADIALL DETAIL SPECIFICATION FOR SHF COAXIAL CABLE
1/18 RADIALL DETAIL SPECIFICATION FOR SHF COAXIAL CABLE Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 31/08/2016 Vérifié par / Verified by V.EUDELINE
More informationDate: November 8 th, Titre / Title HIGH RELIABILITY. RF COAXIAL CONNECTORS for SMP Lock connectors GENERIC SPECIFICATION
1/ 21 Titre / Title HIGH RELIABILITY RF COAXIAL CONNECTORS for SMP Lock connectors Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project manager 08/11/16 Vérifié
More informationRF CABLE ASSEMBLY, TNC, VERY HIGH POWER, 50 OHMS, SEMI-RIGID AND FLEXIBLE CABLE, DC TO 8GHZ BASED ON TYPE TNC-VHP
Page 1 of 21 RF CABLE ASSEMBLY, TNC, VERY HIGH POWER, 50 OHMS, SEMI-RIGID AND FLEXIBLE CABLE, DC TO 8GHZ BASED ON TYPE TNC-VHP ESCC Detail Specification Issue 1 March 2017 Document Custodian: European
More informationHIGH RELIABILITY LOW LOSS COAXIAL CABLE ASSEMBLIES
1/25 Titre / Title HIGH RELIABILITY LOW LOSS COAXIAL CABLE ASSEMBLIES Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 12/08/2015 Vérifié par / Verified
More informationHIGH RELIABILITY LOW LOSS COAXIAL CABLE ASSEMBLIES
1/32 Titre / Title HIGH RELIABILITY LOW LOSS COAXIAL CABLE ASSEMBLIES Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager 27/02/2018 Vérifié par / Verified
More informationTHERMISTORS (THERMALLY SENSITIVE RESISTORS), NTC, RANGE 2000 TO OHMS AT +25 O C WITH A TEMPERATURE RANGE OF -60 O C TO +160 O C
Page 1 of 13 THERMISTORS (THERMALLY SENSITIVE RESISTORS), NTC, RANGE 2000 TO 100000 OHMS AT +25 O C WITH A TEMPERATURE RANGE OF -60 O C TO +160 O C BASED ON TYPE G2K7D411, G4K7D421, G10K4D451, G10K4D453,
More informationRF Characterization Report
SMA-J-P-H-ST-MT1 Mated with: RF316-01SP1-01BJ1-0305 Description: 50-Ω SMA Board Mount Jack, Mixed Technology Samtec, Inc. 2005 All Rights Reserved Table of Contents Introduction...1 Product Description...1
More informationScreening and Qualification Inspection for Coaxial Attenuators
Screening and Qualification Inspection for Coaxial Attenuators Level S, Based on MIL-DTL-3933 THIS SPECIFICATION AND/OR THE SUBJECT MATTER IS RESTRICTED SOLELY FOR THE USE OF EMC TECHNOLOGY, FLORIDA RF
More informationRESISTOR, FIXED, CHIP, METAL FOIL BASED ON TYPE SMP-PW, SMS-PW, SMT-PW. ESCC Detail Specification No. 4001/027
Page 1 of 14 RESISTOR, FIXED, CHIP, METAL FOIL BASED ON TYPE SMP-PW, SMS-PW, SMT-PW ESCC Detail Specification Issue 5 November 2017 Document Custodian: European Space Agency see https://escies.org PAGE
More informationSECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
More informationRG142-TNMNM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR. Regulatory Compliance/Certifications
RG142-TNMNM-3M Product Classification Product Series Product Type RG142 CNT Jumper with interface types and, 3 m RG142 Braided cable assembly General Specifications Body Style, Connector A Body Style,
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More informationSPACE COAXIAL SWITCHES
SPace SECTION CONTENTS SECTION 6 GENERAL INFORMATION... 6-1 low power models... 6-2 to 6-9 HIGH power models... 6-10 to 6-15 RADIALL SPECIFICATIONS... 6-16 GENERAL INFORMATION / SPECIFICATIONS Radiall
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More information7/16 GENERAL. DC GHz GENERAL APPLICABLE STANDARDS APPLICATIONS
GENERAL 50 Ω C - 7.5 GHz GENERAL Standard coaxial connectors Screw--on coupling High power rating Excellent RF performance APPLICABLE STANARS IEC 169-4 IN 47223 22 190 APPLICATIONS Mobile communication
More informationC195-SMQM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C195-SMQM-3M Product Classification Brand Product Series Product Type CNT-195 CNT Jumper with interface types SMA Male and QMA Male, 3M CNT CNT-195 Braided cable assembly General Specifications Body Style,
More informationPAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX
PAGE 1/12 ISSUE 22-06-2018 SERIES DP3T/SPDT PART NUMBER R595 XXX XXX DP3T-SPDT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall s PLATINUM SERIES switches are optimised
More informationPNRRKIT. Portable Networked Re-Radiating Kit Technical Product Data. Features. Description. Utilizes Existing Roof Antenna
PNRRKIT Portable Networked Re-Radiating Kit Technical Product Data Features Utilizes Existing Roof Antenna Re-Radiating Amplifier with Power Supply Typical Gain 30dB Optional Mounting Kit Hardware Adjustable
More informationC240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
More informationMAY 14 Rev B
Product Specification 108-2443 29 MAY 14 Rev B Modular, High Density, RF Connection System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity
More informationFEU (Front End Unit) for Optic Repeater
FEU (Front End Unit) for Optic Repeater 1. Specification 1.1. All Items Parameter Specification Comments RX1 RX2 TX Frequency Range. 1750.625 ~ 1769.375MHz 1750.625 ~ 1769.375MHz 1840.625 ~ 1859.375MHz
More informationSMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationSabritec Qualification Test Report Summary
Sabritec Qualification Summary Qualification of Multimode Fiber Optic Termini, and Type 1, Category 2 Connectors per ARINC Specification 801 QTR #705 03-27-08 Revision Page Paragraph Description of Revision
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND 10 August 2016 SUPERSEDING 16 November 2011 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, PIN CONTACT, JAMNUT MOUNTED, REAR
More informationS-band 500kW Magnetron
S-band 500kW Magnetron GENERAL DESCRIPTION M1901A is a mechanically tunable frequency pulsed type S-band magnetron designed to operate in the frequency range of 2.7 GHz to 2.9 GHz with a peak output power
More informationØ1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT
SSMB / SSMC This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC). They provide
More information- 01DB = 1dB, - 02DB = 2dB, - 03DB = 3dB, - 04DB = 4dB, - 05DB = 5dB, - 06DB = 6dB, - 07DB = 7dB, - 08DB = 8dB, - 09DB = 9dB, - 10DB = 10dB
AT02M750.06 - Page 1 of 14 Product Family: Part Number Series: Temperature Variable Attenuators ATV0805C Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film
More informationLF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationC400-TMTM-30-X. Jumper Assembly Sample Label. Product Classification. General Specifications. Electrical Specifications
C400-TMTM-30-X Product Classification Brand Product Series Product Type CNT-400-FR CNT Jumper with interface types TNC Male and TNC Male, 9.14 m CNT CNT-400 Braided cable assembly General Specifications
More informationMicro Coaxial Connector. Ultrasmall Series with mating height 1.00 mm
MCC Micro Coaxial Connector Ultrasmall Series with mating height 1.00 mm IEEE802.11a b g n WiMAX Bluetooth Zigbee MIMO (Multiple input and multiple output) 1 USS RF V Plug Cable Assembly Mating height
More informationSA26B-10 DATA SHEET. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation
More informationZ LEAD SURFACE MOUNT SPECIFICATION AC AXIAL CEMENTED WIREWOUND RESISTOR & PR POWER METAL FILM RESISTORS
Z LEAD SURFACE MOUNT SPECIFICATION AC AXIAL CEMENTED WIREWOUND RESISTOR & PR POWER METAL FILM RESISTORS FEATURES Surface mounted version Low cost alternative for SMD molded resistor High power dissipation
More informationC400-NMTM-1M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C400-NMTM-1M Product Classification Brand Product Series Product Type CNT-400 CNT Jumper with interface types N Male and TNC Male, 1m CNT CNT-400 Braided cable assembly General Specifications Body Style,
More informationFUSIBLE RESISTOR - NFR25H
FUSIBLE RESISTOR - FEATURES Metal film technology Suitable for protection of circuit boards and designs Overload protection without risk of fire Defined interruption behavior (fusing time) Wide range of
More information- 01DB = 1dB, - 02DB = 2dB, - 03DB = 3dB, - 04DB = 4dB, - 05DB = 5dB, - 06DB = 6dB
AT02M750.08 - Rev A - Page 1 of 10 Product Family: Part Number Series: Temperature Variable Attenuators ATV0805J Series (10GHz) Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni
More information- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB
AT02M0.09 - Page 1 of 13 Product Family: Part Number Series: Temperature Variable Attenuators ATV112F Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film resistive
More informationHMMC-1002 DC 50 GHz Variable Attenuator. Data Sheet
HMMC-12 DC 5 GHz Variable Attenuator Data Sheet Description The HMMC-12 is a monolithic, voltage variable, GaAs IC attenuator that operates from DC to 5 GHz. It is fabricated using MWTC s MMICB process
More informationDC to 400 MHz (40 db Typ. Isolation up to 20 GHz)
Coaxial Low Pass Filter 5Ω DC to 4 MHz (4 db Typ. Isolation up to 2 GHz) The Big Deal Very good rejection, 4 db typ. up to 2 GHz Excellent power handling, 1W Rugged unibody construction CASE STYLE: FF1118
More informationMini Circuits SMA Attenuators
Mini Circuits 15542 SMA Attenuators For rugged, reliable, and repeatable attenuation when accuracy is key, our customers have come to rely on Mini Circuits Fixed. Precision Attenuators. They feature stainless
More informationTimes Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 480.48 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
More informationTechnical Data Sheet STRAIGHT MALE RECEPTACLE FOR PCB SNAP TYPE - REEL OF 400
.. pn ao Technical Data Sheet PAGE 1/5 ISSUE 09-11-16E SERIES SMP-MAX PART NUMBER R222M00090 All dimensions are in mm. COMPONENTS MATERIALS PLATING ( m) Body BRASS NPGR Center contact BRASS NPGR Outer
More information3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer
3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer 43 FEATURES W at 70 C Wide ohmic value range (10 Ω to 5 MΩ) Panel mount available Multi-finger wiper for better C.R.V. Tests according to CECC 41000 or
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationVI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
More informationThermopad. Introduction
Introduction Thermopad Features Lead Free Option Available Impedance 50 and 75 Ohms Frequency Ranges from DC to 46 GHz Attenuation Values from 1 to 10 db Wire Bondable Connections Available Negative and
More informationAgilent 8560 E-Series Spectrum Analyzers
Agilent 8560 E-Series Spectrum Analyzers Data Sheet 8560E 30 Hz to 2.9 GHz 8561E 30 Hz to 6.5 GHz 8562E 30 Hz to 13.2 GHz 8563E 30 Hz to 26.5 GHz 8564E 30 Hz to 40 GHz 8565E 30 Hz to 50 GHz 8565E SPECTRUM
More informationTRANSISTORS, HIGH POWER, PNP BASED ON TYPE 2N5153. ESCC Detail Specification No. 5204/002
Pages 1 to 17 TRANSISTORS, HIGH POWER, PNP BASED ON TYPE 2N5153 ESCC Detail Specification No. 5204/002 Issue 3 - Draft A July 2006 Document Custodian: European Space Agency - see https://escies.org PAGE
More informationE2V Technologies MG5222 X-Band Magnetron
E2V Technologies MG5222 X-Band Magnetron The data should be read in conjunction with the Magnetron Preamble. ABRIDGED DATA Fixed frequency pulse magnetron. Direct replacement for the M5039, being mechanically
More informationMIL-DTL-39030/3 SMA Terminations. Features & Benefits. Applications. M39030 /3-08 S or N
MIL-DTL-39030/3 SMA Terminations SV Microwave offers military SMA terminations that are 39030 approved. QPL-39030 parts are designed and made under DSCC qualifications in order to resist harsh environments
More informationFully Sealed Container Cermet Potentiometers Submarine Applications
Fully Sealed Container Cermet Potentiometers Submarine Applications FEATURES High power rating 1.5 W at 70 C Stainless steel shaft and bushing to endure sea salt water immersion Fully sealed IP68 on panel
More informationAgilent 8560 EC Series Spectrum Analyzers Data Sheet
Agilent 8560 EC Series Spectrum Analyzers Data Sheet Agilent 8560EC 30 Hz to 2.9 GHz Agilent 8561EC 30 Hz to 6.5 GHz 1 Agilent 8562EC 30 Hz to 13.2 GHz Agilent 8563EC 30 Hz to 26.5 GHz Agilent 8564EC 30
More informationSurge Metal Film Leaded Resistor
Surge Metal Film Leaded Resistor FEATURES Metal film technology High pulse load (up to 10 kv) capability Replacement for carbon-composition resistors Compatible with lead (Pb)-free and lead containing
More informationTL072 TL072A - TL072B
A - B LOW NOISE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORT-CIRCUIT PROTECTION
More informationVariable Attenuators (Step & Continuous)
(Step & Continuous) Wide Choice of Attenuation & Frequency Ranges. High Reliability & Long Life Rugged Construction & Connectors Rotational Stops Included on most models Low Cost Designs - Model 3033 Custom
More informationMar07 Rev B
Product Specification Ultraminiature Coax Connector (UMCC) and Cable Assemblies 108-2231 14Mar07 Rev B 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationBCcomponents DATA SHEET. MMU 0102; MMA 0204; MMB 0207 Professional MELF resistors. Product specification File under BCcomponents, BC08.
DATA SHEET File under BCcomponents, BC08 2000 Sep 06 FEATURES Advanced thin film technology Power dissipation rating up to 1 W Excellent overall stability: Class 0,25 Wide professional range: 0,1 Ω to
More informationFully Sealed Container Cermet Potentiometers Military and Professional Grade
PE0 Fully Sealed Container Cermet Potentiometers FEATURES Watt at 70 C High power rating Low temperature coefficient Excellent stability Full sealing Low contact resistance variation Mechanical strength
More informationLimiter Diodes Features Description Chip Dimensions Model DOT Diameter (Typ.) Chip Number St l Style Inches 4 11
Features Low Loss kw Coarse Limiters 200 Watt Midrange Limiters 10 mw Clean Up Limiters 210 20 Description Alpha has pioneered the microwave limiter diode. Because all phases of manufacturing, from design
More informationVI TELEFILTER Filter specification TFS 230 1/5
VI TELEFILTER Filter specification TFS 230 1/5 Measurement Condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating impedances *: for input: 1,95 kω // -5,0 pf for output: 1,67 kω // -5,3
More informationHi-Rel Thin Film Chip Resistors
Hi-Rel Thin Film Chip Resistors FEATURES High-reliability product ESA approved to ESCC 4001/029 Advanced thin film technology SnPb termination plating, minimum 6 % Pb high-reliability thin film chip resistors
More informationTypical Performance Curves
Coaxial SMA Fixed Attenuator 50Ω 1W 3dB DC to 6000 MHz Maximum Ratings Operating Temperature -45 C to 100 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are exceeded.
More informationFeatures wideband coverage, DC to 6000 MHz 2 watt rating rugged unibody construction off-the-shelf availability very low cost
Coaxial SMA Fixed Attenuator 50Ω 2W 7dB DC to 6000 MHz Maximum Ratings Operating Temperature -45 C to 100 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are exceeded.
More informationTITANIUM SERIES R 51 PART NUMBER SELECTION. High Performance Multiport Switches. Our Most Important Connection is with You.
PART NUMBER SELECTION Models: 2: Without 50 Ω terminations 4: With 50 Ω terminations RF Connectors: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (1) Radiall s TITANIUM
More informationS-band Magnetron. Tuner revolutions to cover frequency range 4.75 (note 3) Mounting position (note 4) Any Cooling (note 5) Water
S-band Magnetron GENERAL DESCRIPTION is a mechanical tuned pulsed type S-band magnetron intended primarily for linear accelerator. It is water cooled and has circle waveguide output type. It is designed
More informationINTRODUCTION A WIDE STANDARD RANGE MANY FULL CRIMP MODELS LOW INTERMODULATION CONNECTORS
N INTROUCTION The new Radiall N series has been developed using the latest advances in connector design. These connectors are easy--to--use, highly reliable, innovative and are designed to meet the needs
More informationRESISTIVE POWER SPLITTERS AND DIVIDERS
RESISTIVE POWER SPLITTERS AND DIVIDERS DC 40.0 GHz S Resistive Power Splitters Usage: : Use in RF and wireless applications where one of the two outputs are included in a leveling loop or used as a reference
More informationSMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
More informationFully Sealed Container Cermet Potentiometer Professional Grade
Fully Sealed Container Cermet Potentiometer Professional Grade T Q O QUICK REFERENCE DATA Multiple module Switch module Detent module Special electrical laws No n/a n/a A: linear, L: logarithmic, F: reverse
More informationHigh-ohmic/high-voltage resistors
FEATURES Types VR37 and VR68 meet the safety requirements of: UL1676 (range 51 kω to 11 MΩ) EN665 BS665 (U.K.) NFC 92-13 (France) VDE 86 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationProduct Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications. Included Products
ATBTK-FM Bias Tee Kit, AISG Compatible 698-2170 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface BTS Interface 7-16 DIN Male 7-16 DIN Female Dimensions Depth
More informationATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications.
ATBTK-MF-4G Bias Tee Kit, AISG Compatible 698-2700 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface 7-16 DIN Female BTS Interface 7-16 DIN Male Dimensions
More informationSignal Integrity Testing with a Vector Network Analyzer. Neil Jarvis Applications Engineer
Signal Integrity Testing with a Vector Network Analyzer Neil Jarvis Applications Engineer 1 Agenda RF Connectors A significant factor in repeatability and accuracy Selecting the best of several types for
More informationWirewound/Metal Film Resistors, Commercial Power, Radial Lead
RMW, RMF End-of-Life Product FEATURES High power dissipation in small volume Very stable mounting Non-flammable High pulse load handling capabilities High heat and moisture resistance Various terminal
More informationSIMATIC Ident. RFID systems SIMATIC RF615A. Characteristics 1. Ordering data. Installing and mounting. Connecting the antenna 4
Characteristics 1 Ordering data 2 SIMATIC Ident RFID systems Operating Instructions Installing and mounting 3 Connecting the antenna 4 Antenna parameter assignment 5 Antenna patterns 6 Maximum read/write
More informationHigh data rate connector and assembly MDSA HDR designed for space use. axomach tm
Page 1/45 High data rate connector and assembly MDSA HDR designed for space use. axomach tm Procurement specification: 07072-ST-MDSA HDR -01 Page 2/45 Issue Date Author Endorser Modification Issue A 17/11/2009
More informationSECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
More informationMG5223F S-Band Magnetron
MG5223F S-Band Magnetron The data should be read in conjunction with the Magnetron Preamble. ABRIDGED DATA Fixed frequency pulse magnetron. Operating frequency... 3050 ± 10 MHz Typical peak output power...
More informationPIN CONFIGURATIONS FEATURES APPLICATIONS ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. F, N Packages
DESCRIPTION The is a signal conditioning circuit for use with Linear Variable Differential Transformers (LVDTs) and Rotary Variable Differential Transformers (RVDTs). The chip includes a low distortion,
More informationBCcomponents DATA SHEET. MBA 0204; MBB 0207; MBE 0414 Professional leaded resistors. Product specification File under BCcomponents, BC08.
DATA SHEET File under BCcomponents, BC08 2000 Sep 06 FEATURES Advanced thin film technology Power dissipation rating up to 1 W Excellent overall stability: class 0,25 Wide professional range: 0,22 Ω to
More information086 Model Series. 50Ω DC to 18 GHz. The Big Deal
HAND Coaxial TM Cable 50Ω DC to 18 GHz 086 Model Series The Big Deal Hand Formable Tight Bend Radius Excellent Return Loss and Insertion Loss Ideal for interconnect of assembled systems CASE STYLE: KP1505-XX
More informationSA18N-20 DATA SHEET. 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation
More informationSPECIFICATION. MIMO Dual Band 2.4/5.0GHz. ISM Bands/ZigBee/WLAN/Bluetooth. IEEE n/IEEE ac. High Isolation between Antenna Elements
SPECIFICATION Part No. : MA510.C.CG.005 Product Name : Heavy Duty Screw Mount Antenna MIMO Dual Band 2.4/5.0GHz Features : 2.4GHz/5.0GHz suitable for ISM Bands/ZigBee/WLAN/Bluetooth IEEE.802.11n/IEEE.802.11ac
More informationTELEFILTER Filter Specification TFS 141 C 1/5
TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics
More informationHNRRKIT. Hangar Networked Re-Radiating Kit Technical Product Data
HNRRKIT Hangar Networked Re-Radiating Kit Technical Product Data Features Amplified Roof Antenna Gain 35dB Re-Radiating Amplifier with Power Supply Typical Gain 30dB Optional Mounting Kit Hardware Roof
More informationProgrammable Attenuators
Model 3200 Series Programmable Attenuators with optional TTL Interface dc to 3.0 GHz 1 Watt CELL CONFIGURATIONS: Features o Widest Selection of Attenuation Ranges & Step Sizes o Available Express Models:
More informationHigh Frequency Flat Chip Resistors
FEATURES Speciality product for RF applications Low-inductance trimmed product Suitable for more than 10 GHz Resistance range: 6.8 Ω to 470 Ω Green product, supports lead-free soldering. APPLICATIONS Telecommunication
More information