GV3000 AC General Purpose (Volts/Hertz) and Vector Duty Drive
|
|
|
- Esther Hunt
- 5 years ago
- Views:
Transcription
1 Software Start-Up and Reference Manual D GV3000 AC General Purpose (Volts/Hertz) and Vector Duty Drive Version 5.0
2 Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at describes some important differences between solid-state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid-state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited. Throughout this manual, when necessary, we use notes to make you aware of safety considerations. WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economic loss. ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence. SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present. BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous temperatures. ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE). IMPORTANT Identifies information that is critical for successful application and understanding of the product. Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.
3 Document Update Document Update Electronic Motor Overload Protection This product does not offer speed-sensitive overload protection, thermal memory retention or provisions to act upon motor over-temperature sensing in motors. If such protection is needed in the end-use product, it needs to be provided by additional means. 1
4 Document Update Notes: 2
5 Summary of Changes The information below summarizes the changes made to this manual since its last release (1995). Description of Changes Added Document Update. Page After manual front cover
6 soc-ii Summary of Changes Notes:
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172 U.S. Allen-Bradley Drives Technical Support - Tel: (1) , Fax: (1) , support@drives.ra.rockwell.com, Online: Power, Control and Information Solutions Headquarters Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI USA, Tel: (1) , Fax: (1) Europe/Middle East/Africa: Rockwell Automation, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) , Fax: (32) Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) , Fax: (852) Publication D July 2013 Supersedes Publication D Copyright 2013 Rockwell Automation, Inc. All rights reserved. Printed in USA.
GV3000/SE AC Drive HP, 460V AC
Hardware Reference, Installation, and Troubleshooting Manual D2-3392-7 GV3000/SE AC Drive 30-200 HP, 460V AC Version 6.07 Important User Information Solid-state equipment has operational characteristics
Installation Instructions Space Temperature Transmitter
Installation Instructions Space Temperature Transmitter Catalog Number(s) 1414-CTZ03PBRAA, 1414-CTD03PBRAA, 1414-CTO03PBRAA, 1414-CTS03PBRAA, 1414-CTT03PBRAA, 1414-ITS03PBRAA, 1414-ITT03SBRAA, 1414-ITZ02GBRAA,
Bulletin 509 Three Phase Full Voltage NEMA Starters Size 9 Series A. Renewal Parts
Bulletin 509 Three Phase Full Voltage NEMA Starters Size 9 Series A Renewal Parts Warning: To avoid hazards of electrical shock, remove all power before proceeding. Auxiliary contacts commonly control
1715 Redundant I/O System Specifications
Technical Data 1715 Redundant I/O System Specifications System Module Catalog Numbers 1715-AENTR, 1715-IB16D, 1715-OB8DE,1715-IF16, 1715-OF8I Base Unit Catalog Numbers 1715-A2A, 1715-A3IO Termination Assembly
Using a Combination Sensor with the XM-360 Module
Application Technique Using a Combination Sensor with the XM-360 Module This Application Technique describes how to wire and configure a sensor with combined temperature and acceleration measurement capability
Parameter Settings for PowerFlex Drives Using Sine Wave Filters, dv/dt Filters, and Adjustable Voltage
Application Technique Parameter Settings for PowerFlex Drives Using Sine Wave Filters, dv/dt Filters, and Adjustable Voltage PowerFlex 700, 700VC, and 750-Series AC Drives Topic Page About This Document
PowerFlex 400 AC Drive Guide Specification
PowerFlex 400 AC Drive Guide Specification Adjustable Frequency Drives 3.0 50HP @ 200 to 240V AC 3.0 350HP @ 380 to 480V AC PART 1 GENERAL 1.01 Quality Assurance A. The manufacturer shall have minimum
Harmonic Mitigation Harmonic Data Comparisons
Harmonic Data Comparisons 1336 PLUS, 1336 PLUS II, 1336 IMPACT and 1336 FORCE AC Drives with 6-Pulse, 12-Pulse, and 18-Pulse Front-Ends Topologies 6-Pulse drive 12-Pulse drive 18-Pulse drive Harmonic Spectrum
Trusted 20 Channel Isolated AI/DI FTA Loop Powered
ICSTT-RM294E-EN-P (PD-T8833) Trusted Trusted 20 Channel Isolated AI/DI FTA Loop Powered Product Overview The Trusted 20 Channel Isolated Analogue Input/Digital Input (AI/DI) Field Termination Assembly
Trusted Power Distribution Unit MCB 24 Vdc
PD-T8292 Trusted Trusted Power Distribution Unit MCB 24 Vdc Product Overview The dual 5-channel Trusted Power Distribution Unit Miniature Circuit Breaker (MCB) 24 V is designed for N+1 or 100 % redundant
FLEX Ex V ac In/Quad-Ex dc Out Power Supply
Installation Instructions FLEX Ex 85 250V ac In/Quad-Ex dc Out Power Supply Catalog Number 1797-PS1N Topic Important User Information 2 About the Power Supplies 3 Understand System Planning 4 Electrostatic
Reliability Starts Here. PowerFlex TM 7000 Family of MV Drives
Reliability Starts Here. PowerFlex TM 7000 Family of MV Drives PowerFlex TM 7000 Your success depends on it. Superior Evolution As products evolve and technology advances, our customers demand drives that
Supplemental Motor Protection Devices Specifications
Technical Data Supplemental Motor Protection Devices Specifications Bulletin Numbers 809S, 813S, 814S, 817S, 1409, 1410 Topic Bulletin 809S/813S/814S/817S 2 Page Product Line Overview 2 Cat. No. Explanation
Trusted Speed Monitor Input FTA (SIFTA)
PD-T8846 Trusted Product Overview The Trusted Speed Monitor Input Field Termination Assembly (SIFTA) is a DIN rail assembly. It provides the input field interface for three rotating machine groups when
Supplemental Motor Protection Devices Specifications
Technical Data Supplemental Motor Protection Devices Specifications Bulletin Numbers 809S, 813S, 814S, 817S, 1409, 1410 Topic Page 809S/813S/814S/817 Dedicated Function Motor Protection Relays 2 Product
Trusted Versatile FTA
PD-T8842 Trusted Product Overview The Trusted Versatile Field Termination Assembly (VFTA) T8842 is primarily designed to act as the main interface between field devices associated with the detection and
PowerFlex 400 Submittal
PowerFlex 400 Submittal Submittal Date: Project Name: Project Location: Consulting Engineer: Contractor: Contractor PO #: Distributor Name: Distributor Contact: Distributor Reference #: Note: This is general
12 Input/12 Output Discrete Embedded TTL I/O Module with Pulse Width Modulation and DeviceLogix
Installation Instructions 12 Input/12 Output Discrete Embedded TTL I/O Module with Pulse Width Modulation and DeviceLogix Cat. No. 1799-D12G12GL Inside... For See page About the Module 1 Important User
Digital Input Module. ST-1xxx. User Manual CREVIS Co.,Ltd. Version FnIO S-Series
1 FnIO S-Series Digital Input Module ST-1xxx User Manual Version 1.01 2012 CREVIS Co.,Ltd 2 FnIO S-Series DOCUMENT CHANGE SUMMARY REV PAGE REMARKS DATE EDITOR 1.0 New Document 2011/10/07 JE KANG 1.01 6
Page 1 of 9 Knowledgebase Technote ID # Q /22/2004
Page 1 of 9 Knowledgebase Technote ID # Q70836158 1/22/2004 Renewal Parts for Bulletin 507, 513 Combination Starters with, Handle and s Size 0 3 200-208V 60Hz 0-1/3 3 230-240V 60Hz 0 1/3 3 380-415V 50Hz
USER MANUAL. Maxwell Technologies BOOSTCAP Energy Storage Modules. User Manual for 15V Modules: 20 F, 23 F, 53 F, 58 F 15 Volts DC
USER MANUAL Maxwell Technologies BOOSTCAP Energy Storage Modules User Manual for 15V Modules: 20 F, 23 F, 53 F, 58 F 15 Volts DC BPAK0020 P015 B1 BPAK0023 E015 B1 BPAK0052 P015 B1 BPAK0052 P015 B2 BPAK0058
FLEX 5000 High-speed Counter I/O Modules
User Manual FLEX 5000 High-speed Counter I/O Modules Catalog Numbers 5094-HSC, 5094-HSCXT Important User Information Read this document and the documents listed in the additional resources section about
Copyright 2014 by Minarik Drives
Copyright 2014 by Minarik Drives All rights reserved. No part of this document may be reproduced or transmitted in any form without written permission from Minarik Drives. The information and technical
Product Data. (Cat. No DE)
(Cat. No. 1771-DE) Product Data The Absolute Encoder Module (cat. no. 1771-DE) is an intelligent module that provides high-speed response to machine position independently of the programmable controller
8510 AC Spindle Drive System
8510 AC Spindle Drive System Manual Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application,
External brake resistor AX2090-BW5x
Documentation External brake resistor AX2090-BW5x Accessories for Beckhoff servo drive AX5000 Version: Date: 1.3 2018-03-14 Table of content Table of content 1 Foreword... 5 1.1 Notes on the documentation...
1715 Redundant I/O System Specifications
Technical Data 1715 Redundant I/O System Specifications System Module Catalog Numbers 1715-AENTR, 1715-IB16D, 1715-OB8DE,1715-IF16, 1715-OF8I Base Unit Catalog Numbers 1715-A2A, 1715-A3IO Termination Assembly
Thixotropic Slurry Cup Instruction Manual
Thixotropic Slurry Cup Instruction Manual Manual No. D00900347, Revision B Instrument No. 100072538 2015 Fann Instrument Company Houston, Texas, USA All rights reserved. No part of this work covered by
2015 NFPA 70E. SESHA 2015 ARIZONA MINI CONFERENCE December 10, 2015 Intel Corporation
2015 NFPA 70E SESHA 2015 ARIZONA MINI CONFERENCE December 10, 2015 Intel Corporation Introduction Jeffrey A. Pugh, P.E. Pugh Engineering LLC Bachelor of Science Degrees in Electrical Engineering and Computer
ZXCT1008EV1 ZXCT1008EV1. ISSUE 3 April protection from 110V transients and includes and additional current limiting resistor.
USER GUIDE DESCRIPTION The is a current monitor evaluation board which measures 0.5A, 2.0A or a 2.5A load current. This current is then translated to a proportional output current which is scaled by an
Allen-Bradley. Using the 1756-MO2AE with the TR Encoder (Cat. No ) Application Note
Allen-Bradley Using the 1756-MO2AE with the TR Encoder (Cat. No. 1756-2.9) Application Note Important User Information Because of the variety of uses for the products described in this publication, those
Low Voltage Brushed Motor System
Low Voltage Brushed Motor System Tests performed: 1. RPM vs Output Voltages 2. Thermal Imaging 3. Output Voltage, Output Current, and Direction Voltage for100% duty Cycle a. Forward Direction b. Reverse
ZXMS6002G 60V N-Channel self protected enhancement mode IntelliFET MOSFET with status indication
60V N-Channel self protected enhancement mode IntelliFET MOSFET with status indication Summary Continuous drain source voltage On-state resistance V DS = 60V 500m Nominal load current (V IN = 5V) 1.4A
1-830 SERIES DISPLACEMENT TRANSMITTER
1-830 SERIES DISPLACEMENT TRANSMITTER Operation & Maintenance Manual 746 Arrow Grand Circle Covina, CA 91722 United States of America Tel: (626) 938-0200 Fax: (626) 938-0202 Internet: http://www.cecvp.com
USER S MANUAL PROCESS CONTROL MODULE PCM3
USER S MANUAL PROCESS CONTROL MODULE PCM3 Copyright 2002 by Minarik Corporation All rights reserved. No part of this manual may be reproduced or transmitted in any form without written permission from
ZXMN3G32DN8 30V SO8 dual N-channel enhancement mode MOSFET
30V SO8 dual N-channel enhancement mode MOSFET Summary V (BR)DSS R DS(on) (Ω) I D (A) 30 0.028 @ V GS = 10V 7.1 0.045 @ V GS = 4.5V 5.6 Description This new generation Trench MOSFET from Zetex features
AN2167 Application note
Application note Using the STPM01 with a shunt current sensor Introduction Note: This document describes how a shunt current sensor can be used with the STPM01 metering device in single-phase metering
Conext Core XC Series Inverter, 0G-XC-BB: Thermal Derating Application Note
Conext Core XC Series Inverter, 0G-XC-BB: Thermal Derating Application Note AP-XC-089 Revision A DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, ARC FLASH, AND FIRE This document is in addition to, and incorporates
COOPER POWER SERIES. External application of a motor start capacitor on a single-phase voltage regulator. Voltage Regulators MN225063EN
Voltage Regulators MN225063EN Effective March 2017 Supersedes January 2012 (S225-60-10) COOPER POWER External application of a motor start capacitor on a single-phase voltage regulator SERIES DISCLAIMER
First Draft Language
110.16 First Draft Language (B) Service Equipment. In addition to the requirements in (A), service equipment shall contain the following information: (1) Nominal system voltage (2) Arc flash boundary (3)
Combination Generator Control Module
User Manual Combination Generator Control Module Catalog Numbers 1407-CGCM Important User Information Read this document and the documents listed in the additional resources section about installation,
ZXTP19060CZ 60V PNP medium transistor in SOT89
6V PNP medium transistor in SOT89 Summary BV CEO > -6V BV ECO > -7V (cont) = 4.5A V CE(sat) < -8 @ -A R CE(sat) = 5m P D = 2.4 Complementary part number ZXTN96CZ Description Packaged in the SOT89 outline
ZDT1048 SM-8 Dual NPN medium power high gain transistors
SM-8 Dual NPN medium power high gain transistors Summary BV CEO > 17.5V I C(cont) = 5A V CE(sat) < 75 @ 1A P D = 2.75W Description Advanced process capability has been used to achieve this high performance
SLC 500 RTD/Resistance Input Module
Installation Instructions SLC 500 RTD/Resistance Input Module (Catalog Number 1746-NR8) Inside page Important User Information... 2 For More Information... 3 Hazardous Location Considerations... 4 Environnements
AN EXAMPLE OF A STANDARD ARC FLASH PPE LABELING STRATEGY
The Electrical Power Engineers Qual-Tech Engineers, Inc. 201 Johnson Road Building #1 Suite 203 Houston, PA 15342-1300 Phone 724-873-9275 Fax 724-873-8910 www.qualtecheng.com AN EXAMPLE OF A STANDARD ARC
Steve Kovach District Sales Engineer
Steve Kovach District Sales Engineer 630-740-7463 Steveekovach@Eaton.com Institute of Electrical and Electronics Engineers American Society of Safety Engineers 1 Electrical Hazards Electrical Hazards Shock
ZXCT1050 Precision wide input range current monitor
Precision wide input range current monitor Description The ZXCT1050 is a wide input range current monitor, which operates over a range of input voltages from ground up to V CC -2V. As a result the ZXCT1050
An American Control Electronics Brand PCM4 SERIES USER MANUAL PCM4.
An American Control Electronics Brand PCM4 SERIES PCM4 USER MANUAL www.minarikdrives.com Dear Valued Consumer: Congratulations on your purchase of the PCM4 Series isolation card. This User Manual was created
APPLICATION NOTES. Electrical Fast Transient (EFT) Noise Test Solution ELAN MICROELECTRONICS CORP.
Electrical Fast Transient (EFT) Noise Test Solution APPLICATION NOTES ELAN MICROELECTRONICS CORP. Document Number : AN-025 Date of Issue : March 2007 Issue Version : 1.0 Supported Chips : OTP Type: EM78P341N
CEC VIBRATION TRANSMITTER
CEC 1-808 VIBRATION TRANSMITTER Operation & Maintenance Manual 746 Arrow Grand Circle Covina, CA 91722 United States of America Tel: (626) 938-0200 Fax: (626) 938-0202 Internet: http://www.cecvp.com E-mail:
PRODUCT SPECIFICATIONS
FEATURES AND BENEFITS* Up to 1,000,000 duty cycles or 10 year DC life 51V DC working voltage Active cell balancing Temperature output Overvoltage outputs available High power density Extreme Vibration
LM323. Three-terminal 3 A adjustable voltage regulators. Features. Description
Three-terminal 3 A adjustable voltage regulators Features Output current: 3 A Internal current and thermal limiting Typical output impedance: 0.01 W Minimum input voltage: 7.5 V Power dissipation: 30 W
2015 RIGOL TECHNOLOGIES, INC.
Service Guide DG000 Series Dual-channel Function/Arbitrary Waveform Generator Oct. 205 TECHNOLOGIES, INC. Guaranty and Declaration Copyright 203 TECHNOLOGIES, INC. All Rights Reserved. Trademark Information
Allen-Bradley. Using the 1756-MO2AE with the AEC (Cat. No ) Application Note
Allen-Bradley Using the 1756-MO2AE with the AEC (Cat. No. 4100-2.7) Application Note Important User Information Because of the variety of uses for the products described in this publication, those responsible
PHASE ROTATION METER. Operating and Instruction Manual. a n d A C C E S S O R I E S
PHASE ROTATION METER a n d A C C E S S O R I E S Operating and Instruction Manual HD ELECTRIC COMPANY 1 4 7 5 L A K E S I D E D R I V E WA U K E G A N, I L L I N O I S 6 0 0 8 5 U. S. A. PHONE 847.473.4980
Operating instructions D-37
Operating instructions D-37 Milab Microphones AB Norra Strandgatan 4 P.O. Box 1342 S-251 13 Helsingborg SWEDEN Phone: +46 42 381620 Fax: +46 42 136350 www.milabmic.com Milab Microphones is a trademark
RIGOL. User s Guide. RP1000D Series High Voltage Differential Probe. Feb RIGOL Technologies, Inc
User s Guide RP1000D Series High Voltage Differential Probe Feb. 2013 RIGOL Technologies, Inc Guaranty and Declaration Copyright 2012 RIGOL Technologies, Inc. All Rights Reserved. Trademark Information
AN Use of rectifier diodes at elevated temperatures for short term overloads Application Note AN March 2016 LN33413 Author: Colin Rout
Leakage current normalised to 75 C, - ( pu ) AN 67 Use of rectifier diodes at elevated temperatures for short term overloads Application Note AN67- March 6 LN Author: Colin Rout Introduction: In many applications
Bulletin 2300 Family of Drive Systems Hardware
Bulletin 2300 Family of Drive Systems Hardware Installation Instructions Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment.
Analog Voltage Detector 1-450kV Operating Instructions VDAO450TM. Patent No. 6,275,022
Analog Voltage Detector 1-450kV Operating Instructions VDAO450TM Patent No. 6,275,022 CONTENTS Limitation of Warranty and Liability 2 Product Safety Information 3 Design and Function 4 Operating Procedure
BUV48A Power Transistor
High Voltage Switching Switchmode Series NPN s are designed for use in high-voltage, highspeed, power switching regulators, converters, inverters, motor control system application. Features: Collector-Emitter
ZXCT1030 High-side current monitor with comparator
High-side current monitor with comparator Description The is a high side current sense monitor containing an internal reference and comparator with a non-latching output. Using this device eliminates the
15 Amp Digital High Frequency PWM Motor Speed Controller SPD-315-D and SPD-315-DS
15 Amp Digital High Frequency PWM Motor Speed Controller SPD-315-D and SPD-315-DS The SPD-315-D(S) PWM controller allows you to control the speed of a motor, brightness of a lamp or other load using a
Out 1 sin / cos 1Vpp. sin / cos 1Vpp. Out 3. sin / cos 1Vpp. Out 4 sin / cos 1Vpp. Interface type SV211 SinCos signal splitter with 4 SinCos outputs
Operating Manual Out 1 sin / cos 1Vpp Input: sin / cos 1 Vpp Out 2 sin / cos 1Vpp Out 3 sin / cos 1Vpp SV 211 Out 4 sin / cos 1Vpp Interface type SV211 SinCos signal splitter with 4 SinCos outputs Product
NOsparc! MHXAC1F120! MHXAC1F240! MHXAC1F480 PATENTS AND PATENTS PENDING. Contact Arc Suppressor
NOsparc MHXAC1F120 MHXAC1F240 MHXAC1F480 PATENTS AND PATENTS PENDING Contact Arc Suppressor Contact Arc Suppression for AC Power Relays, Contactors, and Snap-Action Switches User Manual 104-0017E 2014,
BUV298V. NPN transistor power module. General features. Applications. Internal schematic diagram. Order codes
NPN transistor power module General features NPN Transistor High current power bipolar module Very low R th junction case Specific accidental overload areas Fully insulated package (U.L. compliant) for
AN EXAMPLE OF A STANDARD ARC FLASH PPE LABELING STRATEGY
The Electrical Power Engineers Qual-Tech Engineers, Inc. 201 Johnson Road Building #1 Suite 203 Houston, PA 15342-1300 Phone 724-873-9275 Fax 724-873-8910 www.qualtecheng.com AN EXAMPLE OF A STANDARD ARC
VT1586A Rack Mount Terminal Panel Installation and User s Manual
VT1586A Rack Mount Terminal Panel Installation and User s Manual Manual Part Number: 82-0095-000 Rev. June 16, 2003 Printed in U.S.A. Certification VXI Technology, Inc. certifies that this product met
AWS J1.1M/J1.1:2013 An American National Standard. Specification for Resistance Welding Controls
An American National Standard Specification for Resistance Welding Controls An American National Standard Approved by American National Standards Institute July 29, 2013 Specification for Resistance Welding
ZXCT1030EV2 Evaluation Board User Guide
Doc: -UG Page: 1 of 12 Figure 1 Evaluation board components' layout ` DESCRIPTION The is intended for the evaluation of the ZXCT1030 device. The ZXCT1030 is a high side current sense monitor containing
Obsolete Product(s) - Obsolete Product(s)
PNP power Darlington transistor Features Monolithic Darlington configuration Integrated antiparallel collector-emitter diode Application Linear and switching industrial equipment Description The TIP145
Compact I/O RTD/Resistance Input Module
User Manual Compact I/O RTD/Resistance Input Module Catalog Number 1769-IR6 Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical equipment.
DFM600FXM18-A000. Fast Recovery Diode Module DFM600FXM18-A000 FEATURES KEY PARAMETERS V RRM. 1800V V F (typ) 2.0V I F (max) 600A I FM (max) 1200A
Fast Recovery Diode Module Replaces DS5438-1.4 DS5438-2 April 2010 (LN26762) FEATURES Low Reverse Recovery Charge High Switching Speed Low Forward Volt Drop Isolated AlSiC Base with AlN Substrates Dual
Encapsulated Transformers 115V + 115V Primary, Low Profile
Features: Robust construction. Wide range of secondary voltages available. Single voltage and Dual voltage secondary combination. 2.0VA up to 52VA. CE marked. Designed and manufactured according to international
Obsolete Product(s) - Obsolete Product(s)
High power PNP epitaxial planar bipolar transistor Features High breakdown voltage V CEO = -250 V Complementary to 2STC5949 Typical f t = 25 MHz Fully characterized at 125 o C Application Audio power amplifier
LM325 LM325 Dual Voltage Regulator
LM325 LM325 Dual Voltage Regulator Literature Number: SNOSBS9 LM325 Dual Voltage Regulator General Description This dual polarity tracking regulator is designed to provide balanced positive and negative
10 Amp Digital PWM Motor Speed Controller CV-2110-HD and CV-2110-HDS
10 Amp Digital PWM Motor Speed Controller CV-2110-HD and CV-2110-HDS The Analog / Digital PWM controller allows you to control the speed of a motor, brightness of a lamp or other device using an analog
AN61 Designing with References - Extending the operating voltage range
A Product Line of Diodes ncorporated AN61 Designing with References - Extending the operating voltage range Peter Abiodun A. Bode, Snr. Applications Engineer, Diodes Zetex Ltd ntroduction There may be
Obsolete Product(s) - Obsolete Product(s)
Dual NPN-PNP complementary Bipolar General features V CE(sat) h FE I C 0.35V >100 1A High gain Low V CE(sat) Simplified circuit design Reduced component count Applications Push-Pull or Totem-Pole configuration
Obsolete Product(s) - Obsolete Product(s)
TIP33C Complementary power transistors Features. Low collector-emitter saturation voltage Complementary NPN - PNP transistors Applications General purpose Description The devices are manufactured in epitaxial-base
2STC4468. High power NPN epitaxial planar bipolar transistor. Features. Application. Description
High power NPN epitaxial planar bipolar transistor Features High breakdown voltage V CEO = 140 V Complementary to 2STA1695 Typical f t = 20 MHz Fully characterized at 125 o C Application Audio power amplifier
SGSD100 SGSD200. Complementary power Darlington transistors. Features. Applications. Description
SGSD100 SGSD200 Complementary power Darlington transistors Features Complementary NPN - PNP transistors Monolithic Darlington configuration Applications Audio power amplifier DC-AC converter Easy driver
BUL39D. High voltage fast-switching NPN power transistor. Features. Application. Description
High voltage fast-switching NPN power transistor Features Integrated antiparallel collector-emitter diode High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable
Remove wallplate and switch mounting screws. Carefully remove switch from wall leaving all wires attached.
Using Occupancy Sensing Switch with Maestro Application Note #435 Revision A April 2012 1 Occupancy Sensing Switch LutronR Occupancy & Vacancy motion sensors are passive infrared (PIR) sensors that automatically
QuadroMAX. Installation Manual. QM Series. LED Outdoor Lighting Fixtures REV: 3/22/16
QuadroMAX LED Outdoor Lighting Fixtures Installation Manual QM Series REV: 3/22/16 BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING Risk of fire or electric shock. Luminaire wiring
Broadband Step-Up Transformer. User Manual
Broadband Step-Up Transformer User Manual 990-1930 09/2004 Introduction Introduction About this unit The APC Step-Up Transformer provides 220 V power from 60 VAC Broadband cable systems. Safety Electrical
Installation Instructions
007A00 ROOFTOP UNITS GAS HEATING/ELECTRIC COOLING ACCESSORY FLUE DISCHARGE DEFLECTOR SELECT 7.5---10, 12---1/2 and 15 TON Installation Instructions TABLE OF CONTENTS PACKAGE CONTENTS... 1 SAFETY CONSIDERATIONS...
ISO 2575 INTERNATIONAL STANDARD. Road vehicles Symbols for controls, indicators and tell-tales
INTERNATIONAL STANDARD ISO 2575 Sixth edition 2000-03-15 Road vehicles Symbols for controls, indicators and tell-tales Véhicules routiers Symboles pour les commandes, indicateurs et témoins Reference ISO
Obsolete Product(s) - Obsolete Product(s)
High Gain Low Voltage PNP Power Transistor General features Very low Collector to Emitter saturation voltage D.C. Current gain, h FE >100 1.5 A continuous collector current In compliance with the 2002/93/EC
2STX2220. High Gain Low Voltage PNP Power Transistor. General features. Description. Internal schematic diagram. Applications.
High Gain Low Voltage PNP Power Transistor General features Very low Collector to Emitter saturation voltage D.C. Current gain, h FE >100 1.5 A continuous collector current In compliance with the 2002/93/EC
P5100A & P5150 High Voltage Probes Performance Verification and Adjustments
x P5100A & P5150 High Voltage Probes Performance Verification and Adjustments ZZZ Technical Reference *P077053001* 077-0530-01 xx P5100A & P5150 High Voltage Probes Performance Verification and Adjustments
MODEL 3810/2 Line Impedance Stabilization Network
EMC TEST SYSTEMS FEBRUARY 1996 REV C PN 399197 MODEL 3810/2 Line Impedance Stabilization Network OPERATION MANUAL USA P.O. Box 80589 Austin, Texas 78708-0589 2205 Kramer Lane, Austin, Texas 78758-4047
2STA1943. High power PNP epitaxial planar bipolar transistor. Features. Application. Description
High power PNP epitaxial planar bipolar transistor Features High breakdown voltage V CEO > -230V Complementary to 2STC5200 Fast-switching speed Typical f T = 30 MHz Application Audio power amplifier Description
BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors
BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with
TDA7233D 1W AUDIO AMPLIFIER WITH MUTE
1 AUDIO AMPLIFIER ITH MUTE 1 FEATURES OPERATING VOLTAGE 1.8 TO 15 V EXTERNAL MUTE OR POER DON FUNCTION IMPROVED SUPPLY VOLTAGE REJECTION LO QUIESCENT CURRENT HIGH POER CAPABILITY LO CROSSOVER DISTORTION
SINVERT. Technical requirements for medium-voltage transformers for use with SINVERT central inverters. Application manual 04/2012
Technical requirements for medium-voltage transformers for use with SINVERT central inverters Application manual 04/2012 SINVERT Answers for the environment. Technical requirements for medium- Technical
Obsolete Product(s) - Obsolete Product(s)
Low voltage fast-switching PNP power transistor Features Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed 3 Miniature SOT-23 plastic package for surface
2STR2215. Low voltage fast-switching PNP power transistor. Features. Applications. Description
Low voltage fast-switching PNP power transistor Features Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed Miniature SOT-23 plastic package for surface
D44H8 - D44H11 D45H8 - D45H11
D44H8 - D44H11 D45H8 - D45H11 Complementary power transistors Features. Low collector-emitter saturation voltage Fast switching speed TAB Applications Power amplifier Switching circuits 1 2 3 Description
STD1802T4-A. Low voltage fast-switching NPN power transistor. Features. Description. Applications
Low voltage fast-switching NPN power transistor Features This device is qualified for automotive application Very low collector to emitter saturation voltage High current gain characteristic Fast-switching