The Power of Complete Control The 1250 Series Torque and Angle Wrench is Here!
|
|
- Annabel Smith
- 5 years ago
- Views:
Transcription
1
2 The Power of Complete Control The 1250 Series Torque and Angle Wrench is Here! Take control over assembly errors with the Global 400 and 1250 Exacta Series Digital torque and angle wrench. Torque and Angle Modes: T2A Torque to Angle Measures torque first then measures degrees of fastener rotation TAM Torque and Angle Monitoring Measures angle first and then measures torque PTM Prevailing Torque Mode Factors out friction Residual Torque Measures torque value of previously tightened fasteners The 1250 functions exactly like a 1200 Series Exacta 2 when the Global 400 is placed in Peak mode. When the 1250 is placed in Peak mode the only difference between the two wrenches is that the 1250 has a grey display mask and the display mask on the 1200 Series is blue. Either way you have COMPLETE CONTROL over your quality settings. The 1200 Series uses 4-NiMH rechargeable AA batteries The 1250 Series uses a single NiMH rechargeable battery cartridge
3 Feature 1200 Series 1250 Series Exacta Torque & Angle Accuracy +/- 1% of indicated value +/- 1% of indicated value Global 8 Does not connect Does not connect Global 400 Operates with 3 other tools and holding tools Operates with 3 other tools and holding tools Global 400mp Operates with 3 other tools and holding tools Operates with 3 other tools and holding tools Customizable Torque Green Customizable** Customizable** Customizable Angle Green No angle calculations Yellow Angle Setting No angle calculations In torque to angle mode only P-Set Download to Wrench Torque and Angle Monitoring (TAM) Not available YES Torque To Angle (T2A) Not available YES Prevailing Torque (PTM) Not available YES Residual Torque Peak Mode Tool Name/Radio ID Learned Into Global 400 tool bank Global 400 tool bank Tool Name/Radio ID Learned Into Global 400mp Interface in which it will operate Global 400mp Interface in which it will operate If this tool is NOT learned in to a Global Rad - If not connected to Global 400/400mp --- Rad - If not connected to Global 400/400mp Number of Models in Product Line Interchangeable Heads All SR Heads All SR Heads Interchangeable Heads Well over 100 Well over 100 Pin and Spring Dove Tail 25 ft lb/33.8 Nm ft lb/ 542 Nm 25 ft lb/33.8 Nm ft lb/ 542 Nm Quick Change 25 ft lb/33.8 Nm ft lb/ Nm 25 ft lb/33.8 Nm ft lb/ Nm Fixed End Ratchet 250 ft lb/338 Nm Fixed Ratchet 1/2" SD 250 ft lb/338 Nm Fixed Ratchet 1/2" SD Fixed End Ratchet 400 ft lb/542 NM Fixed Ratchet 3/4" SD 400 ft lb/542 NM Fixed Ratchet 3/4" SD Fixed End Ratchet 600 ft lb/814 Nm Fixed Ratchet 3/4" SD 600 ft lb/814 Nm Fixed Ratchet 3/4" SD Units of Measure in lb/ft lb/nm cnm cm.kg in lb/ft lb/nm cnm cm.kg Capacity Range 25 ft lb/33.8 Nm ft lb/ 814 Nm 25 ft lb/33.8 Nm ft lb/ 814 Nm Radio ID Number Entered in PM Automatic Automatic Works With Holding Tool? Radio Signal Severance Protection Pull-to-Green Error Proofing Guidance - Customizable - Customizable Yellow Warning 90% of minimum torque value 90% of minimum torque value Green User programable User programable Red Over target torque Over target torque Time Out in Parameter Turns red when time exceeded Turns red when time exceeded Vibrating Handle on Accept No YES Vibrating Handle on Reject No No
4 Feature 1200 Series 1250 Series Exacta Torque & Angle Low Battery Icon on Tool Screen Active Tool Battery Status Visible on Process Monitor Batteries 4-NiMH rechargeable AA NiMH rechargeable battery cartridge Case/Display Markings Exacta Series label on side below screen Grey display mask with T2A TAM PTM Residual Operation Display Markings Target/Residual/Peak/Stored T2A/TAM/PTM/Residual Display Mask coloring Blue mask with white buttons/arrows Grey mask with white buttons/arrows Torque Modes Residual, Peak Residual, Peak Torque and Angle Modes None Torque 2 Angle (T2A)/Torque and Angle Monitoring Prevailing Torque Mode/Residual Torque Wrench Display Track Torque Changes? Error Proofing Error Proofing by Design 1200 Series 1250 Series Exacta Torque & Angle Flattened Case Wrench Level Changes Prevented Lever Sensitivity No No If radio connection is severed and restored the Exacta updates the Global Series as to all work that was completed during radio loss Error Proofing by Guidance 1200 Series 1250 Series Exacta Torque & Angle Operator prevented from using the wrong tool Distinctive OK/NOK visual guidance on each fastening Color guidance Yellow/Green/Red wrench display on each fastening Provides batch count update to Global Series Distinctive OK/NOK Kinesthetic Feedback No Vibrates Only on OK Low battery indicator on wrench and in Global Series process monitor Torque Value Visual guidance on each fastening even when radio connection may be severed/disrupted Continued Auditory guidance even when radio connection may be severed Continued Kinesthetic guidance even when radio connection may be severed No YES Easy to read display LED on bottom of wrench for visibility from more angles Error Proofing by Behavior Modification 1200 Series 1250 Series Exacta Torque & Angle Operator can use the wrong tool No No Identifies "Double Hit" on fastener No YES
5 Europe Headquarters Sales Offices Sales Representatives International Distributors Sturtevant Richmont U.S. Distributors cover all 50 states 555 Kimberly Drive, Carol Stream, IL USA Worldwide +1 (847) U.S. Toll-free: +1 (800) Fax: +1 (847) Sturtevant Richmont. All rights reserved. Accurate. Reliable. Durable. Tools you trust. More than 40 years ago The Sturtevant Company and The Richmont Company were merged together to form the most comprehensive torque tool and calibration equipment product line on the planet. Many of our customers have been with us for 75 years, and all say that SR tools are, by far, the easiest to calibrate and most accurate, durable tools on the market. Try our tools and see first-hand why those who know us are customers for life. LIT
TORQUE SCREWDRIVER. Accuracy, Durability, Reliability. Sturtevant Richmont Torque Tools.
TORQUE SCREWDRIVER Accuracy, Durability, Reliability. Sturtevant Richmont Torque Tools. The Curious Cal Lab Manager I was calibrating tools for more than 11 years before I became the lab manager. We make
More informationSummary Brochure 2018
Summary Brochure 2018 Delivering enhanced productivity, improved safety, process traceability and compliance to industry standards for our customers through a range of advanced torque solutions What s
More informationTW Series Digital Torque Wrenches Torque and Angle Model User Manual ASG, Division of Jergens, Inc.
TW Series Digital Torque Wrenches Torque and Angle Model User Manual 15700 S. Waterloo Road Cleveland, OH 44110-3898 Phone: (888) 486-6163 Fax: (216) 481-4519 Email: asginfo@asg-jergens.com Web: www.asg-jergens.com
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
More informationINSTALLATION INSTRUCTIONS ATV WINCH MULTI-MOUNT Multi-Mount Mounting-Kit: PN Application: YAMAHA BIGBEAR 00+
INSTALLATION INSTRUCTIONS ATV WINCH MULTI-MOUNT Multi-Mount Mounting-Kit: PN 61025 Application: YAMAHA BIGBEAR 00+ Your safety, and the safety of others, is very important. To help you make informed decisions
More informationLaser LAX 300. Operating instructions
Laser LAX 300 en Operating instructions A1 4 3 2a 1a 2b 8 4 5 9 1b 6 7 X1 X2 X3 5m 5m S = 5m X X S = 5m Y X Y3 Y1 Y2 X Y en Operating instructions The STABILA LAX 300 is an easy to use crossed line and
More informationDITCH WITCH ELECTRONIC GUIDANCE EQUIPMENT
DITCH WITCH ELECTRONIC GUIDANCE EQUIPMENT guesswork is officially dead. Ditch Witch. DITCH WITCH 752 TRACKER, 752 DISPLAY Location, depth, roll angle, pitch, beacon temperature, battery status the Ditch
More informationPremium Auto Feed System. Products and Solutions for Assembly
Premium Auto Feed System Products and Solutions for Assembly About ASG We are personally committed to understanding and exceeding our customers requirements. We are committed to continuously improving
More informationCRITICAL INFORMATION:
IMPORTANT ALERT: GM uses a very strong thread-locking compound on all body bolts. Use of an air assisted impact ratchet can cause damage to the threads on factory body mount bolts and the internal nut
More informationHardinge FlexC Dead-Length Collet System Style DL 42mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 42mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationHardinge FlexC Dead-Length Collet System Style A. Installation Instructions and Parts Lists. FlexC Collet System Style A Instructions B-153
Hardinge FlexC Dead-Length Collet System Style A Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationLaser LAX 300 G. Operating instructions
Laser LAX 300 G en Operating instructions A1 4 3 2a 1a 2b 8 4 5 9 1b 6 7 A2 A3 11 10 A4 A5 A6 L1 ± 0,3 mm/m ± 23/64 A7 L1 ± 0,3 mm/m ± 23/64 L2 ± 1/4 ± 0,2 mm/m B1 B2 90 C1 C2 C3 C4 X1 X2 X3 5m 5m S
More informationPower supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
More informationWeld Join multiple layers together to create one shape, removing any overlapping cut lines.
Use the to access image design tools such as: Slice, Weld, Attach, Flatten, and Contour. Also make changes to image layers such as: hide, unhide, group, ungroup, duplicate, and delete. Open the Layer Attributes
More informationSide-of-Pole Mount for 4 Modules (SPM4) For Module Type B ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Side-of-Pole Mount for 4 Modules (SPM4) For Module Type B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3358-2 PCN 060712-5 Side-of-Pole Mount for 4 Modules (SPM4) For
More informationMARKING TORQUE SCREWDRIVER MODEL MNTD
MARKING TORQUE SCREWDRIVER MODEL MNTD OPERATING INSTRUCTION MNTD MNTD Model MNTD120CN with detachable Resin Grip MNTD500CN with detachable Auxiliary Tightening Bar To use this product properly and safely,
More informationAddendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit
Addendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit PN: L250150309 Lingenfelter Performance Engineering 1557 Winchester Road Decatur, IN 46733 (260) 724-2552 (260) 724-8761
More informationHydrajaws Safety Lifeline Tester
Hydrajaws Safety Lifeline Tester Operating Instructions HYDR AJAWS LIMITED Hydrajaws Safety Lifeline Tester 4 5 1 6 7 2 3 9 10 8 12 11 TECHNICAL SPECIFICATIONS Load Gauges Range available: Analogue: 0-25kN/lb/f
More informationAdjusting 90 Compass Hardware Including 4-Point
Toll Free 800.564.948 www.comfortcompany.com 509 South nd Ave Bozeman, MT 59718 Adjusting 90 Compass Hardware Including 4-Point Compass Hardware - US Patent No. 7,104,610 & 7,891,739 Apparatus for Mounting
More informationMaintenance Information
16575177 Edition 1 June 2006 Electric Angle Wrench QE8 Series Maintenance Information Save These Instructions General Instructions: Refer to Suggested Tools Parts List for quick reference to the tools
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: Fifth Wheel Adapter Titan 999T5 W4198 KIT CONTENTS: Item Qty. Part Description Service Part Number A 1 Fifth Wheel Adapter
More informationMETAL DETECTOR INSTRUCTION GUIDE
METAL DETECTOR INSTRUCTION GUIDE SET UP STEP 1. STEP 2. Your NATIONAL GEOGRAPHIC detector requires no assembly or tools. Simply remove the detector from the box. Press down the red UNLOCK button on both
More informationProduct # Drive Size (in) Overall Length (in) /4 5-3/ /4 6-1/ /8 7-11/ / /2 9-3/ /2 10-1/4
STANLEY Pear Head Quick Release Ratchets Pear head design for strength, durability, and performance. Quick-release mechanism to lock sockets onto the drive during operation and allow easy changeover. Reversible
More informationBFS / BFSM SERIES Installation & Maintenance Manual
Introduction: The BFS / BFSM series electric actuators have battery backup modules for fail safe operation. The BFS series is for two position control and the BFSM series is for proportional control, both
More informationThe first task is to make a pattern on the top that looks like the following diagram.
Cube Strategy The cube is worked in specific stages broken down into specific tasks. In the early stages the tasks involve only a single piece needing to be moved and are simple but there are a multitude
More informationHydraulic Torque and Ratcheting Wrenches
Series Hydraulic Torque and Ratcheting es Fits easily in tight spaces Thinner than the nut height Light weight, best power to weight ratio in the industry. Interchangeable wrench heads and reaction units
More informationmeped v2 Assembly Manual
meped v Assembly Manual The meped is an open source quadruped robot designed by Scott Pierce of Spierce Technologies, LLC. This design is released under the Creative Commons, By Attribution, Share Alike
More informationOperating instructions Contrast sensor O5K / / 2016
Operating instructions Contrast sensor O5K500 707 / 00 / 06 Contents Preliminary note. Symbols used Functions and features Installation. Installation conditions Operating and display elements 5 5 Electrical
More informationINSTRUCTION SHEET STRUT DRIVER RETROFIT KIT PN: 22-79SDRF
INSTRUCTION SHEET STRUT DRIVER RETROFIT KIT PN: 22-79SDRF COMPONENTS: - Note: Each kit comes with one Strut Driver Gear Case Assembly, one Strut Driver Tube End Adapter Assembly, and a One-Time-Use Threadlocker
More informationHardinge FlexC Collet System Style D 65mm
Hardinge FlexC Collet System Style D 65mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly read
More informationINSTALLATION GUIDE FOR SR-CANOPY KIT SNOWRATOR
2018 INSTALLATION GUIDE FOR SR-CANOPY KIT SNOWRATOR AES L. T. RICH PRODUCTS 1/31/2018 Contents SR-CANOPY KIT INSTALLATION REV 1 1.0 SHIPPING CONTENTS... 2 2.0 IMPORTANT INFORMATION... 3 2.1 PURPOSE...
More informationSTRAIGHT HANDLEBAR KIT
STRAIGHT HANDLEBAR KIT P/N 2881973 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are
More informationInstructions Suzuki Samurai E-Brake Caliper Lever Reorientation
Instructions Created by an: 86-95 Suzuki Samurai E-Brake Caliper Lever Reorientation Instructions Some of these calipers that were supplied in our kits have the lever oriented incorrectly. These instructions
More informationEpson Stylus Pro QUICK REFERENCE GUIDE
Epson Stylus Pro 11880 QUICK REFERENCE GUIDE Printer Parts Front Roll paper spindle Roll paper cover Roll paper holder Left ink bay Paper lever Control panel Ink bay lights Ink cover button Right ink bay
More informationLOCTITE WEBINAR SERIES Threadlocking & the Torque-Tension Relationship
LOCTITE WEBINAR SERIES Threadlocking & the Torque-Tension Relationship Meet Your Presenters Doug Lescarbeau Michael Feeney Market Development Director Doug.Lescarbeau@Henkel.co m Application Engineer Michael.Feeney@Henkel.com
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS ROCK SLIDERS APPLICATION: 2007-2017 Jeep Wrangler JK 2 Door PART NUMBER: 42-7005 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 ROCK SLIDER ASSEMBLY, DRIVER
More informationHANDLEBAR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS TOOLS REQUIRED. Instr Rev Page 1 of 6
HANDLEBAR KIT P/N 2881993 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted
More informationFABRICATOR 211i & 252i ROLL CAGE ASSEMBLY INSTRUCTIONS
Manual 0-5233 Manufacturer: Thermadyne Industries Address: 82 Benning Street West Lebanon, New Hampshire 03784 USA Telephone: 1-800-426-1888 Fax: 1-800-535-0557 Email: sales@thermalarc.com www.thermalarc.com
More informationMarking equipment. Marking flexible, mobile and easy!
Marking equipment Marking flexible, mobile and easy! A family enterprise, established by Ernst Reiner in 1913, has its headquarters in Furtwangen, in the Black Forest. Today the company is organized in
More informationINSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: Application: Kymco MXU 250
INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 72008 Application: Kymco MXU 250 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we
More informationFASTENERS, MEASUREMENTS AND CONVERSIONS
FASTENERS, MEASUREMENTS AND CONVERSIONS Bolts, Nuts and Other Threaded Retainers Although there are a great variety of fasteners found in the modern car or truck, the most commonly used retainer is the
More informationMATE PILOT TURRET CALIBRATION SYSTEM 2016 PN. Superior Solutions for Sheet Metal Fabricators
Superior Solutions for Sheet Metal Fabricators MATE PILOT TURRET CALIBRATION SYSTEM 2016 PN WORLDWIDE HEADQUARTERS: 1295 Lund Boulevard, Anoka, Minnesota 55303 USA Tel +1.763.421.0230 Fax +1.763.421.0285
More informationPower supply CP-D 24/1.3
2CDC 271 027 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 24 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 1.3 A Rated output power
More informationManual Carton Closing Staplers
Operator s Manual Manual Carton Closing Staplers SHB00-A Item No. 6400 -/8" Crown Carton Closing Stapler 5/8" and /4" (5mm and 8mm) Ask for Genuine INTERCHANGE A58 and A4 Staples SHB50-C Item No. 640 -/4"
More informationRhino Packing Gland Tool
Instruction Sheet P/N Rhino Packing Gland Tool 1. Description See Figure 1. The Rhino packing gland tool is used to remove the packing gland from Rhino bulk unloader pumps. The tool consists of two components,
More informationServo Amplifier 4-Quadrant PWM for Brushless DC-Servomotors
Servo Amplifier -Quadrant PWM for Brushless DC-Servomotors Series BLD 010 Operating Instructions Index Chapter 1. Description 2. Illustration 3. Specification. Dimensions. Safety notes.1 Skilled personnel.2
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS E-SERIES STEP BARS / 4 OVAL STEP BARS APPLICATION: 2011-2017 Jeep Grand Cherokee PART NUMBER: 23-3610, 23-3615, 21-3610, 21-3615, 23-73610 ITEM QUANTITY DESCRIPTION TOOLS NEEDED
More informationExcellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Molex Connector Corporation 0640014600 For any questions, you can email
More informationINSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: and Application: All UTV s*
INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: 83970 and 84360 Application: All UTV s* * does not include Arctic Cat vehicles Your safety, and the safety of others, is very important. To help
More informationPower supply CP-E 24/0.75
2CDC 271 016 F0t06 a OUTPUT L+, L : terminals output b INPUT L, N, PE: terminals input c LOW: red LED output voltage too low d OK: green LED output voltage OK e OUTPUT Adjust: rotary potentiometer output
More informationSeries 70 Servo NXT - Modulating Controller Installation, Operation and Maintenance Manual
THE HIGH PERFORMANCE COMPANY Series 70 Hold 1 sec. Hold 1 sec. FOR MORE INFORMATION ON THIS PRODUCT AND OTHER BRAY PRODUCTS PLEASE VISIT OUR WEBSITE www.bray.com Table of Contents 1. Definition of Terms.........................................2
More informationHardinge FlexC Collet System Style D
Hardinge FlexC Collet System Style D Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly read this
More informationPower supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
More informationSERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 6, 2012 Service Instruction No. 1458F (Supersedes Service Instruction
More informationClassic SportBar Camaro V6 or V8
Classic SportBar 2011-2015 Camaro V6 or V8 The Classic SportBar is intended for restyling purposes only and does NOT provide roll over protection. Read entire installation guide before starting. Component
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationEMB MANUFACTURING INC.
TRAILER WOODSPLITTER MODEL SE80CR ASSEMBLY INSTRUCTION MANUAL Please review and understand the operators manual before attempting to operate this machinery. EMB MANUFACTURING INC. 4144 BOOMER LINE ST.
More informationWheelchair Attachment
Wheelchair Attachment Set-Up Guide and Registration Pages 1-4: Steps to Set-Up your FreeWheel Page 5: Page 6: Page 7: Page 5: Page 9: Back: Clamp Plate Footrests and TiLite Angle-Adjustable Footrest Modifications
More informationG5 System Family and Accessories
G5 System Family and Accessories www.scanrecose.com www.scanreco.com. Radio 2.4 GHz (Worldwide) Frequency hopping 2 Radio Great range Have been tested with 300 Meters (in line of sight) 100 Meters in a
More informationLaser Distance Finder Extech DT500
User Guide Laser Distance Finder Extech DT500 Introduction Congratulations on your purchase of the Extech Model DT500 Laser Distance Finder. This meter measures Distance up to 70m (230 ) and calculates
More informationRunning the PR2. Chapter Getting set up Out of the box Batteries and power
Chapter 5 Running the PR2 Running the PR2 requires a basic understanding of ROS (http://www.ros.org), the BSD-licensed Robot Operating System. A ROS system consists of multiple processes running on multiple
More informationInstallation Instructions TMW Antenna Tower Mount for 4ft (1.2m) Antennas.
Description The following pages show the steps required to assembly and fit the antenna mount to a vertical tower pipe of diameter 48 to 115 mm (1.9 to 4.5"). This mount provides ±20 azimuth or ±15 elevation
More informationTorque Sensor Series 3000 and Series 4000
Properties Sensorshaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement range
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SNYPER TUBULAR FENDERS APPLICATION: 2007-2017 Jeep Wrangler JK PART NUMBER: 62-1005, 62-1015 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 FRONT FENDERS, DRIVER (1) AND PASSENGER
More informationCTTR Tire Rack Required tools
CTTR Tire Rack Required tools Torque wrench, ratchet, 9/16 socket, tape measure, and square edge. ASSEMBLY REQUIREMENTS *Torque all T-bolt nuts to 35-40 foot pounds. Failure to follow the assembly instructions
More informationLaser Distance Finder Extech DT500
User Guide Laser Distance Finder Extech DT500 Introduction Congratulations on your purchase of the Extech Model DT500 Laser Distance Finder. This meter measures Distance up to 70m (230 ) and calculates
More informationAT-5000 Professional Underground Cable / Pipe Locator System
AT-5000 Professional Underground Cable / Pipe Locator System Buried Utilities represent a major challenge to electricians who need to trace and trouble shoot such systems. They also represent a hazard
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationWelding & Fabrication Tools R8 Mini Pliers
With Volta Tools You Can Never Go Wrong! Fast and simple belt installation. Unique and versatile design - compact, rugged and easy-to-use. Designed for both shop and field use. Light-weight construction.
More informationFRONT BUMPER KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6
FRONT BUMPER KIT P/N 2882301 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these
More informationINS-AS Dual Bracket Mounting Kits for Quintel Antennas
The Quintel Optimal Separation (QOS) Dual Mount Antenna Bracket Kit allows a variable horizontal separation for a single band or across multiple bands for two Quintel QS Series antennas when operating
More informationInstallation Instructions. WEDLOK Splice. For conveyor and elevator belts. phone
Installation Instructions WEDLOK Splice For conveyor and elevator belts www.flexco.com Tel: 1-800-541-8028 www.flexco.com phone 1-630-971-0150 Table of Contents Kit Contents...pg. 3 Data Table No. 1...pg.
More informationCam Handle Service Guide
Cam Handle Service Guide Page 2. Introduction Page 3. Troubleshooting guide Page 4-5. Adjusting the clamp force Page 6-7. Disassembling, greasing and replacing components Page 8-9. Replacing the post bearings
More informationPower supply CP-E 48/5.0 Primary switch mode power supply Data sheet
2CDC 271 028 F0008 OUTPUT L+, L+, L-, L-: terminals - output Features Rated output voltage 48 V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output current 5 A Rated
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationRevision 1. March 21, ADC Operation Manual N 11 th St San Jose CA
Revision 1 March 21, 2017 ADC Operation Manual www.mountztorque.com - 1080 N 11 th St San Jose CA 95112 408.292.2214 1 Index 1. Installation 3 1.1 Required PC specification 3 1.2 Software 3 2. Operation
More informationREP Design LLC. 193 Winding Ridge Rd, Southington, CT INSTALLATION INSTRUCTIONS:
REP Design LLC 193 Winding Ridge Rd, Southington, CT 06489 1-860.426.1894 n7emw@cox.net www.repdesign.us INSTALLATION INSTRUCTIONS: SHD-SO239 Super Heavy Duty SO-239Antenna Mounting System Thank you for
More informationTex-452-A, Rotational Capacity Testing of Fasteners Using a Tension Measuring Device
Using a Tension Measuring Device Contents: Section 1 Overview...2 Section 2 Definitions...3 Section 3 Apparatus...4 Section 4 Part I, Rotational Capacity Testing...5 Section 5 Part II, Values for Fasteners
More informationFormula Suspension Fork RCC INSTALLATION AND ASSEMBLY INSTRUCTIONS
Formula Suspension Fork RCC INSTALLATION AND ASSEMBLY INSTRUCTIONS COMPONENTS: 2 3 4 1 5 1) Remote regulator / Remote lever 2) Nut 3) Nut rubber cap 4) Complete cable 5) Cable rubber cap Note: In case
More informationTORQUE WRENCHES Click Type
TORQUE WRENHES Metal and omfort Grip Micrometer adjustable click torque wrenches are easy to operate, and have many industrial, automotive, and aircraft uses. From 10 in. lbs. to 2000 ft. lbs., I offers
More informationLASER ENHANCED REVOLVER GRIP OWNER S MANUAL RED LASER GREEN LASER
LASER ENHANCED RED LASER GREEN LASER REVOLVER GRIP OWNER S MANUAL LASER ENHANCED GRIP Installation Instructions Caution... 3 Safety Labels... 4 Installation...5-7 Programming...8-10 Batteries (Red Laser)...
More informationDelivering enhanced Productivity, increased Sustainability. and improved Safety to our customers through a range of. advanced Torque Solutions
Summary Brochure 206 Delivering enhanced ductivity, increased Sustainability and improved Safety to our customers through a range of advanced Torque Solutions Overview About Us For over 30 years, we have
More informationSales & Service. JFK - Just For Kids. sasportonline.com. 135 Forestview Road 7879 Will Rogers Blvd.
Sales & Service sasportonline.com SA Sport (Canada) SA Sport (U.S.A.) 135 Forestview Road 7879 Will Rogers Blvd. P.O. Box 40 Fort Worth, Texas Orillia, Ontario USA 76140 Canada L3V 6H9 Telephone: (705)
More informationPower supply CP-E 12/10.0 Primary switch mode power supply Data sheet
2CDC 271 024 F0008 OUTPUT L+, L+, L-, L-: terminals - output INPUT L, N, PE: terminals - input OUTPUT OK: green LED - output voltage OK OUTPUT LOW: red LED - output voltage too low OUTPUT Adjust: potentiometer
More informationAmerisun PowerSmart Snow Blower Repair Instructions
149 Commonwealth Drive Menlo Park, CA 94025 Amerisun PowerSmart Snow Blower Repair Instructions IMPORTANT SNOW BLOWER SAFETY NOTICE Read ALL instructions included in this brochure. Failure to follow these
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: GMC SIERRA 1500 HDX & SPORTSMAN GRILLE GUARDS (2014 & UP) APPLICATION PART # S 57-3690, 57-3695, 40-3695, 45-3690 ITEM QUANTITY
More informationVersion Number_1.8(English Version) Copyright 2011 by Aumed, All rights reserved. Aumed Group Corp.
Version Number_1.8(English Version) Copyright 2011 by Aumed, All rights reserved Aumed Group Corp. 3/F Building D,No.31 Jiaoda Dong Road, Haidian District, Beijing 100044 China Tel: 86-10-8288 4173 Fax:
More informationPower supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
More informationWhat is a fastener? A device to locate or hold parts
What is a fastener? A device to locate or hold parts As a repair technician you will become skilled at removing, reconditioning, replacing, and installing fasteners. An important skill to learn is how
More informationNEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
More informationLEG CURL IP-S1315 INSTALLATION INSTRUCTIONS
LEG CURL IP-S35 INSTALLATION INSTRUCTIONS Copyright 2009. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written
More informationC L A S S I C. Deluxe. Snow Thrower Cab. Assembly and Care Instructions
C L A S S I C Deluxe Snow Thrower Cab Assembly and Care Instructions Deluxe Snow Thrower Cab Assembly and Care Instructions Before you begin please unpack the carton and check that you have all your parts.
More informationOperators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series
Operators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series! WARNING! Inappropriate use of rock saw may cause serious injury or death. Operators must read this manual before use and
More informationInstallation Instructions Precision Sport Shifter
Installation Instructions Precision Sport Shifter 2004 and up Pontiac GTO Part Number 45043 2010, 2005, 2004 by B&M Racing and Performance Products This B&M Precision Sport Shifter has been designed to
More informationDirect Burial Floodlight - DBF Installation Instructions Above Grade Housing
P.O. Box 60080 16555 East Gale Ave. City of Industry, California 91716-0080 626/968-5666 FAX 626/330-3861 Direct Burial Floodlight - DBF Installation Instructions DBF10 / DBF710 WARNING: Fixtures must
More informationProcedure for Testing Direct Tension Indicators (DTI) Assemblies
Procedure for Testing Direct Tension Indicators (DTI) Assemblies 1. Scope: This test is to ensure that the bolt will be at or above the specified minimum bolt tension after installation when the direct
More informationUSER MANUAL Nord-Lock X-series washers
USER MANUAL Nord-Lock X-series washers JOINT GUIDE 3 ASSEMBLY INSTRUCTIONS 4 TECHNICAL DATA 5 TORQUE GUIDE 5 THE EXCEPTIONAL SYSTEM THAT PREVENTS BOLT LOOSENING AND SLACKENING Nord-Lock X-series washers
More informationPower supply CP-E 24/20.0
2CDC 271 027 F0008 a OUTPUT L+, L+, L, L-: terminals output b INPUT L, N, PE: terminals input c 13-14: terminals - signalling contact d OUTPUT OK: green LED output voltage OK e OUTPUT LOW: red LED output
More informationOperations Manual Edition 3.1
Operations Manual Edition 3.1 MREL GROUP OF COMPANIES LIMITED 1555 Sydenham Road, Kingston, Ontario K7L 4V4 Canada T: +1-613-545-0466 F: +1-613-542-8029 E: blasting@mrel.com www.mrel.com ii Copyright Information
More informationInstruction Manual for installing
Instruction Manual for installing Preloaded (HSFG) Bolting with TurnaSure DIRECT TENSION INDICATORS TurnaSure LLC TABLE OF CONTENTS Introduction... 1 Theory of Preloaded Bolting Assemblies... 2 Tightening
More information