TesT system for ConduCTed and radiated immunity

Transcription

1 nsg 070 TesT system for ConduCTed and radiated immunity The, successor of the NSG 070, is a multifunctional EMC immunity test system. Its large frequency range from to G and its modular set-up using internal or external amplifi ers enable a large variety of applications including tests according to IEC 000--, various BCI applications as well as signal generator and power meter for test systems as per IEC 000--, IEC , IEC and many other applications. The powerful and easy to use fi rmware makes the independent from an external PC and control software, however it can also be remote controlled for system operation. A state-of-the-art data transfer of test and measurement data for documentation is provided by stick to be plugged into the front panel. Integrated signal generator to G power meter inputs to G Integrated power amplifier module for different applications Multiple EUT monitoring options,7 TFT color display Internal, menu-based control software Basic remote control software and report generator included External access to signal generator output and power amplifier input and output power meter inputs.7 color display, easy to use firmware Hard keys for important functions User port for TTL inputs and TTL outputs and supply voltages for individual monitoring and control applications Analog, digital and optical monitoring inputs for extensive EUT monitoring options 0 M reference for synchronisation, Trigger input for external control of measurement routines Remote control via RS, LAN or 8-0 E0 Nov. 00

2 nsg 070 Technical specifications Generator Frequency range: Resolution: Reference frequency: G 0 M Reference output Level Level range: Resolution: Settling time: -0 to db 0 ms Amplitude modulation Modulation depth: 0 00% Modulation frequency range: 0 Frequency resolution: Pulse modulation Rise / fall time (0% / 0%): < µs Modulation frequency range: 0 Frequency resolution: Duty cycle: 0% to 0% External modulation Delay time: < µs / 80 Period: min. 0 µs Pulse width: min. 0 µs Frequency range: Linear measurement range channel : channel,: Max. input/no damage channel -: Noise level: Input return loss: Connector: G - to +7 - to > db below the measurement range >0 db (below 00 M), >7 db (00 M to G) BNC socket, 0 Ω datasheet

3 nsg 070 (continued) Accuracy 0 to G, 0 to 0 C channel to : typ. <0. db channel, below 0 M: range > typ. <. db channel and, below 0 M: range >7 typ. <. db amplifier Nominal output power: 0 W 0 W 7 W Frequency range: 0 0 M 0 0 M 0 0 M Input impedance: 0 Ω 0 Ω 0 Ω Output impedance: 0 Ω 0 Ω 0 Ω Input return loss: min. 0 db min. 0 db min. 0 db Output return loss: nominal min.. db, 0 db without damage nominal min.. db, 0 db without damage nominal min.. db, 0 db without damage Gain: min. db min. db min. 0 db Gain fl atness: max. +/- db max. +/- db max. +/- db Saturated output power: min. min. min. 8.7 Max. input power linear without damage: < -. max. +0 < -. max. +0 < - max. +0 nd harmonic distortion at nominal output power: typ. < -0 dbc typ. < -0 dbc typ. < - dbc rd harmonic distortion at nominal output power: typ. < -0 dbc typ. < -0 dbc typ. < -8 dbc 8-0 E0 Nov. 00

4 nsg 070 Test and measurement routines Firmware: Generator mode Sweep: Modulation: Others: frequency sweep, level sweep AM, AM PC (peak conservation), pulse modulation and external free parameter setting from to G, high power mode using power amplifi er Firmware: Main generator menu Firmware: Immunity mode Firmware: Immunity test setup Firmware: Calibration result Level: Test methods IEC 000--: Test methods BCI: Sweep: Modulation: EUT monitoring: Calibration: EUT threshold search: Store and recall: Component check: Saturation check: Additional features: constant or slope test levels, max test levels depending on power amplifi er, test routine for IEC level to and X up to 0 EMF, for BCI tests levels in ma or dbµa CDN, EM clamp, current clamp and direct injection, clamp injection with test level control using monitoring probe substitution method with optional use of the monitoring probe, closed loop method with power limitation (factor adjustable) frequency sweep, sweep function linear, steps per decade, percental and as requested in ISO AM, AM PC (peak conservation), pulse modulation, external or mixed (e.g. AM internal modulated with PM external) individual confi guration of the ports, function to check or prepare the EUT monitoring, display of EUT monitoring results during the test, in the result fi le and in the test report test set-up and monitoring probe calibration, display, store and recall function of calibration fi les (limitation of fi le numbers only by the disk space, typical >0 fi les) manual search by changing frequency or stress level store and recall function of test confi gurations, calibration results and test results (number of fi les is only limited by the disk space, typical >0 fi les), supports sticks quick check of system components, e.g. cable, attenuator max. db/ db/ 8 db attenuation for 0 W/ 0 W/ 7 W amplifi er, max. + db gain at 7 output level function to check the available power needed for 80% AM (only available for fi rmware operation) free parameter setting from to G, supports external power amplifi er, switch SW 070, monitoring probe MD 070, directional coupler and attenuator datasheet

5 nsg 070 Windows software General: Remote control: Data transfer: The windows software includes the fi rmware functionality. The following additional features are available see below. The software allows the use of the report generator and all post processing features without the remote connection to the. remote control of via LAN, or RS transfer between and PC via LAN connection or with stick Software: Generator menu Windows software: Generator mode Display: Single step mode: power meter display (units,, ) with reference value setting, min./max. display and export to a log fi le (frequency, time, power), EUT monitoring display synchronized frequency sweep with power measurement, output as graph and log. fi le (application: scalar analysis on quadripole networks) Software: Immunity test setup Windows software: Immunity mode Sweep: EUT threshold search: EUT monitoring: Additional features: One click report generation: Export function: test level can be different from calibration value, level sweep with start and stop value or with free editable table, level profi le editor and sweep function for BCI tests different opportunities for manual and automatic control power meter use as EUT monitoring device, keyboard activity for test interrupt with possibility for writing test report commands (EUT reaction etc.), output control for user port for each frequency step or each monitoring event output control for user port (to control a switch for the use of two amplifi er) tool for test report generation in rtf format, works with different user changeable templates, post processing of measurement data (input for test conditions, EUT parameters and comments), free changeable structure and items of the report, user support of repetitive inputs result and calibration fi les can be converted to txt fi les, graphs can be zoomed and converted to jpg fi les Software: EUT monitoring setup 8-0 E0 Nov. 00

6 nsg 070 Analog ports Front panel Generator output: amplifi er input: amplifi er output: channel to : N socket 0 Ω, G N socket 0 Ω, max. +0 N socket 0 Ω as defi ned in chapter panel Monitoring input analog: BNC socket, 0- Ri= kω, m resolution External modulation input: BNC socket, impedance >0 kω, level: pp to get 00% AM, 0 0 M reference output: BNC socket, approx. pp / 0 Ω Digital ports front panel with ports Front panel panel User port: Monitoring digital input : Monitoring digital input : host connector for stick, keyboard, mouse D-Sub pole TTL inputs TTL outputs + / 00 ma, - / 00 ma, + / 00 ma power supply BNC socket 0- via optical coupler Ri=. kω, switching threshold approx. - BNC socket 0- via optical coupler, Ri=. kω, switching threshold approx. - Monitoring optical input: LWL (Light wave connector), HP versatile link HFBR00 series 0 kbd, (avoid scattered light on the back panel) Trigger input: BNC socket, TTL for external triggering, max. frequency 00, trigger delay <0 ms RS: D-Sub pole, up to 00 Bd PS keyboard: PS host connector for stick, keyboard, mouse device connector: for remote control Network: RJ datasheet

7 nsg supply supply unit 00 to 0 AC 0 / 0 autoranging recommended fuse F for nominal 0 recommended fuse F for nominal 0 consumption without power amplifi er: approx. 80 W A (slow) 0. A (slow) 0 W module: approx. W A (slow). A (slow) 0 W module approx. 0 W A (slow). A (slow) 7 W module approx. W. A (slow). A (slow) General data Operating temperature range: 0 C to 0 C Storage temperature range: -0 C to 0 C Relative humidity: % / 0 C (no moisture condensation) EMC: DIN/EN -:00 Shock: DIN/EN ibration: DIN/EN Protection class: DIN/EN 00-/IEC 00- Mechanical specifications Size (W x H x D) : Weight: cm ( ) x cm (HU) x. cm (with handle bar and foot) approx. kg (with internal power amplifi er), approx. 8 kg (without internal power amplifi er) Size of cardboard box: 80 cm x cm x cm (also for options ATN 0xx and/or LE 070 additional space available) Weight of cardboard box: approx. 8 kg (empty) 8-0 E0 Nov. 00

8 out < +0 out < +0 ch. < +0 ch. < +0 ch. < +7 ch. < +0 ch. < +0 ch. < +7 out < +0 ch. < +0 ch. < +0 ch. < +7 EM-Koppelzange KEMZ M (000 M) EUT M M LL LL nd M nd LL nd 8 Test System for Conducted and Radiated Immunity Application for IEC/EN 000--, calibration set-up with CDN db attenuator Compact generator with built-in power amplifier CDN 0 Ω AE-side EUT-side 00 Ω 0 Ω termination 0/0 Ω adapter ch. Ground plane Application for IEC/EN 000--, EUT set-up with CDN Compact generator with built-in power amplifier with KEMZ 80 and CAL 80 db attenuator Auxiliary equipment AE CDN Equipment under test EUT AE-side EUT-side Insulating Ground plane Insulating Application for IEC/EN 000--, calibration set-up with EM clamp Compact generator with built-in power amplifier db attenuator Termination AE-side EUT-side 0 Ω 00 Ω EM clamp 00 Ω Ground plane 0/0 Ω adapter 0/0 Ω adapter datasheet

9 out < +0 out < +0 ch. < +0 ch. < +0 ch. < +7 ch. < +0 ch. < +0 ch. < +7 EM-Koppelzange KEMZ M (000 M) EUT M M LL LL nd nd Test System for Conducted and Radiated Immunity Application for IEC/EN 000--, calibration set-up with current injection probe Compact generator with built-in power amplifier ch. 0 Ω termination 0/0 Ω adapter db attenuator Calibration jig Current injection probe Ground plane Application for IEC/EN 000--, EUT set-up with EM clamp or current injection probe and for example with use of a monitoring probe Compact generator with built-in power amplifier Auxiliary equipment db attenuator ch. Equipment under test AE AE-side EUT-side EUT EM clamp Insulating Ground plane Monitoring probe Insulating recommendation, achievable test levels with db attenuator, 0. db cable loss, max. insertion loss of the coupling device and AM with 80% modulation depth Amplifier module: 0 W 0 W 7 W CDN: EMF 8 EMF 0 EMF EM clamp (KEMZ 80): 8 EMF EMF 7 EMF Current injection clamp (CIP ): EMF EMF 0 EMF (typ.) 8-0 E0 Nov. 00

10 out < +0 out < +0 ch. < +0 ch. < +0 ch. < +7 ch. < +0 ch. < +0 ch. < +7 DIRECTIONAL COUPLER DCP M DIRECTIONAL COUPLER DCP M M M LL LL nd nd 0 nsg 070 Application for automotive BCI, calibration set-up (power requirements and frequency range demand external power amplifier and directional coupler) output ch. stress level ch. forward power ch. reverse power amplifier input 0 Ω Termination Output Directional coupler Calibration jig BCI probe Ground plane Application for automotive BCI, EUT set-up with monitoring probe automotive BCI solution output ch. level monitoring ch. forward power ch. reverse power amplifier input Output Auxiliary equipment AE EUT Directional coupler Insulating BCI probe Monitoring probe Ground plane Equipment under test datasheet

11 out < +0 ch. < +0 ch. < +0 ch. < +7 out < +0 ch. < +0 ch. < +0 ch. < +7 M DIRECTIONAL COUPLER DCP M LL M nd LL nd Test System for Conducted and Radiated Immunity Application for automotive BCI with two power amplifiers, calibration set-up output User port ch. stress level ch. forward power ch. reverse power Switch (part of SW 070) A B Interlock amplifier inputs A B 0 Ω Termination Switch (part of SW 070) DIRECTIONAL COUPLER Calibration jig BCI probe Ground plane Application for IEC/EN up to G (power requirements and frequency range demand external power amplifier and directional coupler, field probe control required optional software) Software output 0 Ω ch. n.c. ch. forward power ch. n.c. amplifier input Output GTEM cell Directional coupler 8-0 E0 Nov. 00

12 nsg 070 Delivery items for the series Compact immunity test system, - G generator and power meter (power amplifi er as selected); remote control software on stick; spare fuses (); RS cable (Nullmodem); mains cable GB, CH, USA/JP, EU; LAN cable, crossover, m; keyboard (English); operating manual with rack mounting kit Delivery information Part number Description MD 070 monitoring probe SW 070, switch network xspdt ATN 07, db attenuator, 7 Watts Teseq GmbH Landsberger Str. Berlin Germany T F desales@teseq.com -0 Compact immunity test system, - G generator and power meter (without power amplifi er) -0 Compact immunity test system, - G generator and power meter (with 0 W module 0-0 M) -0 Compact immunity test system, - G generator and power meter (with 0 W module 0-0 M) 0-7 Compact immunity test system, - G generator and power meter (with 7 W module 0-0 M) 7-0 -TC Traceable calibration (ISO70), order only with the device 8-0 -DKD DKD calibration (ISO70), order only with the device 0 Rack Rack mounting kit for 80 SW 070 Option for : -Switch network x SPDT 00 MD 070 Monitoring device (current sensing probe) active/passive with PSU 00 and LE in storage case 77 USO 0-RS-0 to serial/optical converter, 0 m POF, RS converter 7 WIN 000 Test house software with months support 0 LE 070 cable set for, consist of: cable, N(m)-N(m), m with one right-angle plug, RG; cable, BNC(m)-N(m), 0 mm, RG; cable, N(m)-N(m), 0 mm, RG8; cable, N(m)-BNC(m), m, RG; adapter N(m)-N(m); adapter N(f)-BNC(m) 08 ATN 0 Attenuator W cw N(f)-N(f) 0 ATN 00 Attenuator 0 W cw N(f)-N(f) 07 ATN 07 Attenuator 7 W cw N(f)-N(f), incl. cable LE For CDNs, EM clamp, current injection probes, BCI accessories and antennas please use the web page datasheet