2.5Gbps application RoHS Compliant Products Available

Transcription

1 LC-ROSAX9XXX.5Gbps PIN-TIA Receiver with Receptacle Modules Features High sensitivity Differential ended output Single +.V operation Applications Trans-impedance amplifier with AGC.5Gbps application RoHS Compliant Products Available SDH/SONET application General LC-ROSAJ7XB Series is a pin or 5 pin PIN-TIA with Receptacle operating on.5gbps. It provides high sensitivity with AGC, 00ohm differential outputs PIN-TIA provides a monitor pin.. A split sleeve for the optical connector is jointed with Ǿ.5mm ferrule. Ordering Information (Standard version *Note ) Part No. Insulation Wavelength(nm) Voltage (V) Pin Type LC-ROSA90B NO 70~60. A LC-ROSAJ9EB YES 70~60. E LC-ROSA9DB NO 70~60. D LC-ROSAJ9EB YES 70~60. E *Note: For more ordering information, please refer the nomenclature and contact EPOTOLINK sales. Page of 5

2 Absolute maximum ratings Parameter Min Typ. Max Unit Storage Temperature Operating Temperature TIA Supply Voltage...5 V Operation Relative Humidity - 85 % Soldering Temperature / Time - 60/0 C/S Electrical and optical characteristics Parameter Symbol Min. Typ. Max. Unit Test Condition Operating Wavelength λ nm Supply Current Icc ma No Loads Saturation Power Psat nm Small-Signal Bandwidth BW MHz Low-Frequency Cut off LF khz Sensitivity dbm λ=0 ER=0dB, BER=E-0 Single Ended Output Impedance R Ω Rise /FallTime T ns 0~80% Pin Assignment *Note TYPE: A Dout Dout GND (CASE) PIN-TIA-pin-A Dout TYPE: D 5 Vpd PIN-TIA-pin-D 5 Dout TYPE: E RSSI 5 5 Dout PIN-TIA-pin-E Page of 5

3 Note: Other Pin type can be customized. Package dimension *Note OPTICAL PLANE Insulating materials Insulation OPTICAL PLANE Not insulated *Note:Insulation is the TO-CAN and the metal pipe insulation. Nomenclature A B C D E L C R O S A A B C D E F Insulation J= Insulation BLANK=Non-insulated structure Date rate Wavelength Voltage 9=.5Gbps =70~60nm =.V Pin Type 0= pin-a D= pin-d E= pin-e Page of 5

4 F Ferrule sets of type BLANK=With the ceramic sleeve and the SM fiber-stub B=With a ceramic sleeve M= with a split sleeve and the MM fiber-stub W=Without the ceramic sleeve and Without the fiber-stub Precaution () The modules should be handled in the same manner as ordinary semiconductor devices to prevent the electro-static damages. For safe keeping and carrying, the modules should be packaged with ESD proof material. To assemble the modules on PCB, the workbench, the soldering iron and the human body should be grounded. () Please pay special attention to the atmosphere condition because the dew on the module may cause some electrical damages. () Under such a strong vibration environment as in automobile, the performance and reliability are not guaranteed. Obtaining Document You can visit our website: Or contact listed at the end of the documentation to get the latest documentation. Revision History Verision Initiated Reviewed Approved Release Date Vb- Zore.Zhao Kelly.Cao 0-6- Notice: Eoptolink reserves the right to make changes or discontinue any product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the products are for illustrative purposes only. Eoptolink makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Contact: Add: Floor 5, Building, No. Gaopeng Avenue, High-Tech District, CHENGDU, SICHUAN 600 P.R. CHINA Page of 5

5 Tel: (+86) ext 86 & 809 Fax: (+86) Postal: Page 5 of 5