Laser TX/RX. Laser. Fiber Temp Rate. (nm)

Transcription

1 Features: Supports 9.95Gb/s to 11.3Gb/s bit rates Single LC connector Built-in digital diagnostic functions Case Operating Temperature: Standard: 0 to 70 C Complaint with IEEE 802.3ae 10GBASE-LR/LW Compliant to SFP+ Electrical MSA SFF-8431 Compliant to SFP+ Mechanical MSA SFF-8432 Two types: A: 1270nm DFB Transmitter/ 1330nm Receiver B: 1330nm DFB Transmitter/ 1270nm Receiver Link length up to 10km with 9/125 µm SMF 20km with 9/125 µm SMF 40km with 9/125 µm SMF Applications 10GBASE-LR 10G Ethernet at Gbps 10GBASE-LW 10G Ethernet at 9.953Gbps 1200-SM-LL-L 10G Fiber Channel at Gbps Order Information Table 1-Order Information Bit Laser TX/RX Connec Part No. Distance Laser Fiber Temp Rate (nm) tor note1 DDMI GABP G 10km 1270nm/1330 DFB LC SM C yes GABP G 10km 1330nm/1270 DFB LC SM C yes GABP G 20km 1270nm/1330 DFB LC SM C yes GABP G 20km 1330nm/1270 DFB LC SM C yes GABP G 40km 1270nm/1330 DFB LC SM C yes GABP G 40km 1330nm/1270 DFB LC SM C yes GABP G 60km 1270nm/1330 DFB LC SM C yes GABP G 60km 1330nm/1270 DFB LC SM C yes Note:1 Case Temperature Absolute Maximum Ratings Table2- Absolute Maximum Ratings Parameter Symbol Min. Typical Max. Unit Notes Supply Voltage Vcc V Storage Temperature T s C Copyright Gigac Technology Co., Ltd. DS A3 Page 1 of11

2 Operating Humidity RH % Note2: Exceeding any one of these values may destroy the device permanently. Recommended Operating Conditions Table 3- Recommended operating Conditions Parameter Symbol Min. Typical Max. Unit Notes Operating Case Temperature T C C Power Supply Voltage Vcc V Power Supply Current Icc ma Power Dissipation Pd W Bit Rate BR Gbps Electrical Characteristics Table 4- Electrical Characteristics Parameter Symbol Min. Typ. Max. Units Notes Transmitter Differential Data Input Swing V in,p-p mv PP Input Differential Impedance Z IN Ω Tx_Fault Tx_Disable Normal Operation V OL V Transmitter Fault V OH 2 - V CC V Normal Operation V IL V Laser Disable V IH 2 - V CC+0.3 V Receiver Differential Date Output V out mv Output Differential Impedance Z D Ω Rx_ Output Rise Time(20-80%) T R ps Output Fall Time (20-80%) T F ps Normal Operation V OL V Lose Signal V oh 2 - V CC V Optical Characteristics Table5.1.1-Optical Characteristics (GABP , SFP+ BiDi TX1270nm/RX1330nm 10km, Power budget 9dB at least) Parameter Symbol Unit Min Type Max Notes Distance KM Power budget db 9 Launch Optical Power P Extinction Ratio ER db Copyright Gigac Technology Co., Ltd. DS A3 Page 2 of11

3 Receiver Sensitivity RS D A Hysteresis db Note: 1.Coupled into 9/125 SMF. Note: 2.Measured with PRBS test Table5.1.2-Optical Characteristics (GABP , SFP+ BiDi TX1330nm/RX1270nm 10km, Power budget 9dB at least) Parameter Symbol Unit Min Type Max Notes Distance KM Power budget db 9 Launch Optical Power P Extinction Ratio ER db Receiver Sensitivity RS D A Hysteresis db Note: 1.Coupled into 9/125 SMF. Note: 2.Measured with PRBS test Table5.2.1-Optical Characteristics (GABP , SFP+ BiDi TX1270nm/RX1330nm 20km, Power budget 12dB at least) Parameter Symbol Unit Min Typ Max Notes Copyright Gigac Technology Co., Ltd. DS A3 Page 3 of11

4 Distance KM Power budget db 12 Launch Optical Power P Extinction Ratio ER db Receiver Sensitivity RS D A Hysteresis db Table5.2.2-Optical Characteristics (GABP , SFP+ BiDi TX1330nm/RX1270nm 20km, Power budget 12dB at least) Parameter Symbol Unit Min Type Max Notes Distance KM Power budget db 12 Launch Optical Power P Extinction Ratio ER db Copyright Gigac Technology Co., Ltd. DS A3 Page 4 of11

5 Receiver Sensitivity RS D A Hysteresis db Note: 1.Coupled into 9/125 SMF. Note: 2.Measured with PRBS test Table5.3.1-Optical Characteristics (GABP , SFP+ BiDi TX1270nm/RX1330nm 40km, Power budget 16dB at least) Parameter Symbol Unit Min Typ Max Notes Distance KM Power budget db 16 Launch Optical Power P Extinction Ratio ER db Receiver Sensitivity RS D A Hysteresis db Table5.3.2-Optical Characteristics (GABP , SFP+ BiDi TX1330nm/RX1270nm 40km, Power budget 16dB at least) Parameter Symbol Unit Min Type Max Notes Distance KM Power budget db 16 Copyright Gigac Technology Co., Ltd. DS A3 Page 5 of11

6 Launch Optical Power P Extinction Ratio ER db Receiver Sensitivity RS D A Hysteresis db Note: 1.Coupled into 9/125 SMF. Note: 2.Measured with PRBS test Table5.4.1-Optical Characteristics (GABP , SFP+ BiDi TX1270nm/RX1330nm 60km, Power budget 16dB at least) Parameter Symbol Unit Min Typ Max Notes Distance KM Power budget db 20 Launch Optical Power P Extinction Ratio ER db Receiver Sensitivity RS Copyright Gigac Technology Co., Ltd. DS A3 Page 6 of11

7 D A Hysteresis db Table5.4.2-Optical Characteristics (GABP , SFP+ BiDi TX1330nm/RX1270nm 60km, Power budget 16dB at least) Parameter Symbol Unit Min Type Max Notes Distance KM Power budget db 20 Launch Optical Power P Extinction Ratio ER db Receiver Sensitivity RS D A Hysteresis db Note: 1.Coupled into 9/125 SMF. Note: 2.Measured with PRBS test Recommended Host Board Power Supply Circuit Figure 1, Recommended Host Board Power Supply Circuit Copyright Gigac Technology Co., Ltd. DS A3 Page 7 of11

8 Pin arrangement SFP+ 10G BIDI Series Table 5-Pin Function Definitions Note: Figure 3, Pin View Pin Symbol Name/Description Notes 1 VEET Module Transmitter Ground 1 2 TX_FAULT Module Transmitter Fault 2 3 TX_DISABLE Transmitter Disable; Turns off transmitter laser output 3 4 SDA 2-Wire Serial Interface Data Line (MOD-DEF2) 5 SCL 2-Wire Serial Interface Clock (MOD-DEF1) 6 MOD_ABS Module Absent, connected to V EET or V EER in the module 2 7 RS0 8 RX_ Rate Select 0, optionally controls SFP+ module receiver as the following when HIGH input Bit Rate>4.25 Gbps and when LOW input Bit Rate 4.25 Gbps. Receiver Loss of Signal Indication (in FC designated as RX_, in SONET designated as, and in Ethernet designated as NOT Signal Detect) Rate Select 1, optionally controls SFP+ module 9 RS1 transmitter as the following when HIGH input Bit Rate>4.25 Gbps and when LOW input Bit Rate 4.25 Gbps. 10 V EER Module Receiver Ground 1 11 V EER Module Receiver Ground 1 12 RD- Receiver Inverted Data Output 13 RD+ Receiver Non-Inverted Data Output 14 V EER Module Receiver Ground 1 15 V CCR Module Receiver 3.3 V Supply 16 V CCT Module Transmitter 3.3 V Supply 17 V EET Module Transmitter Ground 1 18 TD+ Transmitter Non-Inverted Data Input 19 TD- Transmitter Inverted Data Input 20 V EET Module Transmitter Ground 1 Copyright Gigac Technology Co., Ltd. DS A3 Page 8 of11 2

9 1. The module ground pins are isolated from the module case. 2. The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board. 3. The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module. Recommended Interface Circuit Figure 2, Recommended Interface Circuit Monitoring Specification The digital diagnostic monitoring interface also defines another 256-byte memory map in EEPROM.For detail EEPROM information; please refer to the related document of SFF-8472 Rev 9.5. The monitoring specification of this product is described in Table 6 and Table 7. Figure 3, Memory Map Copyright Gigac Technology Co., Ltd. DS A3 Page 9 of11

10 Mechanical Figure 5, Mechanical Diagram Regulatory Compliance Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins Electrostatic Discharge to the enclosure MIL-STD-883G Method EN 55024:1998+A1+A2 IEC GR-1089-CORE Class 1C (>1000 V) Compatible with standards Copyright Gigac Technology Co., Ltd. DS A3 Page 10 of11

11 Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition FCC Part 15 Class B EN55022:2006 CISPR 22B :2006 VCCI Class B EN 55024:1998+A1+A2 IEC FDA 21CFR and EN (IEC) :2007 EN (IEC) :2004+A1 UL and CUL EN :2006 SFP+ 10G BIDI Series Compatible with standards Noise frequency range: 30MHz to 6GHz. Good system EMI design practice required to achieve Class B margins. System margins are dependent on customer host board and chassis design. Compatible with standards. 1KHz sine-wave, 80% AM, from 80MHz to 1GHz. No effect on transmitter/receiver performance is detectable between these limits. CDRH compliant and Class I laser product. TüV Certificate No UL file E TüV Certificate No (CB scheme ) RoHS6 2002/95/EC 4.1& /747/EC 5&7&13 Compliant with standards *note2 Note1: For update of the equipment and strict control of raw materials, Gigac has the ability to supply the customized products since Jan 1, 2007, which meet the requirements of RoHS6 (Restrictions on use of certain Hazardous Substances) of European Union. In light of item 5 in RoHS exemption list of RoHS Directive 2002/95/EC, Item 5: Lead in glass of cathode ray tubes, electronic components and fluorescent tubes. In light of item 13 in RoHS exemption list of RoHS Directive 2005/747/EC, Item13: Lead and cadmium in optical and filter glass. The three exemptions are being concerned for Gigac s transceivers, because Gigac s transceivers use glass, which may contain Pb, for components such as lenses, windows, isolators, and other electronic components. Notice Gigac reserves the right to make changes to or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Gigac makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Revision history Version Initiated Reviewed Revision History Release Date A0 Code smith Update case temp. symbol A1 HOU Denny Add the extended temperature range A2 Code Denny Update package size, adjust the data manual typesetting format A3 Jeffrey Danny Power change to 0~5 (for 40km units) Contact Add: 3rd Floor, Business Incubator Park(Neighborhood Center), Section 2 of Xihang Port Avenue,Southwest Airport Economic Development Zone,Chengdu , China Tel: (+86) Fax: (+86) Postal: sales@gigac.com Website: Copyright Gigac Technology Co., Ltd. DS A3 Page 11 of11