SFP+ Cable Assemblies, 0.5m/1m/2m/3m/4m/5m/6m/7m/8m/9m/10m/11m/12m/15m Reach RoHS6 Compliant. Lengt

Transcription

1 EOLP-96-CLB-XX Copper SFP+ Cable Assemblies SFP+ Cable Assemblies, 0.5m/1m/2m/3m/4m/5m/6m/7m/8m/9m/10m/11m/12m/15m Reach RoHS6 Compliant Features Supports 1Gb/s to 10.5Gb/s bit rates Support 1x, 2x, 4x and 8x Fiber Channel data rates Hot-pluggable SFP 20PIN footprint AC coupling of PECL signals Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC performance Lower Power Consumption< 0.5W Power Supply: +3.3V Compatible to SFP+ MSA Temperature Range: 0~ 70 RoHS6 Compliant Applications Storage Area Networks (SAN), Network Attached Storage and Storage Servers 1G/2G/4G/8G Fiber Channel Switched fabric I/O Data center cabling infrastructure Hubs, switches, routers, servers, NICs Order Information Part No. Data rate Lengt Passive/Activ AWG h e Temp EOLP-96-CLB-H-30P Up to 10.5G 0.5m 30 Passive 0-70 EOLP-96-CLB-01-30P Up to 10.5G 1m 30 Passive 0-70 EOLP-96-CLB-02-30P Up to 10.5G 2m 30 Passive 0-70 EOLP-96-CLB-03-30P Up to 10.5G 3m 30 Passive 0-70 EOLP-96-CLB-04-30P Up to 10.5G 4m 30 Passive 0-70 EOLP-96-CLB-05-30P Up to 10.5G 5m 30 Passive 0-70 EOLP-96-CLB-H-24P Up to 10.5G 0.5m 24 Passive 0-70 EOLP-96-CLB-01-24P Up to 10.5G 1m 24 Passive 0-70 EOLP-96-CLB-02-24P Up to 10.5G 2m 24 Passive 0-70 EOLP-96-CLB-03-24P Up to 10.5G 3m 24 Passive 0-70 Page 1 of 8

2 Copper SFP+ Cable Assemblies EOLP-96-CLB-04-24P Up to 10.5G 4m 24 Passive 0-70 EOLP-96-CLB-05-24P Up to 10.5G 5m 24 Passive 0-70 EOLP-96-CLB-06-24P Up to 10.5G 6m 24 Passive 0-70 EOLP-96-CLB-07-24P Up to 10.5G 7m 24 Passive 0-70 EOLP-96-CLB-08-24P Up to 10.5G 8m 24 Passive 0-70 EOLP-96-CLB-09-24P Up to 10.5G 9m 24 Passive 0-70 EOLP-96-CLB-10-24P Up to 10.5G 10m 24 Passive 0-70 EOLP-96-CLB-11-24P Up to 10.5G 11m 24 Passive 0-70 EOLP-96-CLB-12-24P Up to 10.5G 12m 24 Passive 0-70 EOLP-96-CLB Up to 10.5G 5m 30 Active 0-70 EOLP-96-CLB Up to 10.5G 7m 30 Active 0-70 EOLP-96-CLB Up to 10.5G 10m 28 Active 0-70 EOLP-96-CLB Up to 10.5G 12m 28 Active 0-70 EOLP-96-CLB Up to 10.5G 10m 24 Active 0-70 EOLP-96-CLB Up to 10.5G 15m 24 Active 0-70 Note1: Standard version Regulatory Compliance Product Certificate Certificate Number Applicable Standard TUV R EN :2006+A11+A1+A12 EN :2007 EN :2004+A1+A2 UL E UL CSA C22.2 No EMC CE AE EN 55022:2006 EN 55024:1998+A1+A2 CB JPTUV M1 IEC IEC FCC WTF13F E 47 CFR PART 15 OCT., 2010 WTF13F E 47 CFR PART 15 OCT., 2010 FDA CDRH ROHS RLSZF /65/EU Product Description EOLP-96-CLB-XX Copper SFP+ Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standard. Page 2 of 8

3 Absolute Maximum Ratings Copper SFP+ Cable Assemblies Parameter Symbol Min Typ Max Units Maximum Supply Voltage Vcc V Storage Temperature T S C Normal operating condition Parameter Symbol Min Typ Max Units Ref. Operating Case Temperature Top 0 70 C Supply Voltage Vcc V Power Consumption P 0.5 W Data Rate Gbps Performance Specifications Electrical Parameter Symbol Min. Typ. Max Unit Notes Supply Current Icc ma Note2 Transmitter Differential Input Voltage (PECL) Receiver Differential Output Voltage (PECL) VIN mvpp VO mvpp Impedance Zcable Ohms MOD-DEF1, 2 VIH Vcc V Note2: The supply current includes SFP Module s supply current and test board working current. Physical Data Parameter Description 30AWG 28AWG 24AWG Units Cable Diameter OD mm Bend Radius Minimum Sustained Bend mm Page 3 of 8

4 Reference Interface Copper SFP+ Cable Assemblies Pin Descriptions Page 4 of 8

5 Copper SFP+ Cable Assemblies Pin No. Logic Symbol Name/Description Note 1 VeeT Transmitter Ground 2 LV-TTL-O TX_Fault N/A 1 3 LV-TTL-I TX_DIS Transmitter Disable 2 4 LV-TTL-I/O SDA Two Wire Serial Data 5 LV-TTL-I SCL Two Wire Serial Clock 6 MOD_DEF0 Module present,connect to VeeT. 7 LV-TTL-I RS0 N/A 1 8 LV-TTL-O LOS LOS of Signal. 2 9 LV-TTL-I RS VeeR Receiver Ground 11 VeeR Receiver Ground 12 CML-O RD- Receiver Data Inverted 13 CML-O RD+ Receiver Data NON-Inverted 14 VeeR Receiver Ground 15 VccR Receiver Supply 3.3V 16 VccT Transmitter Supply 3.3V 17 VeeT Transmitter Ground 18 CML-I TD+ Transmitter Data Non-Inverted 19 CML_I TD- Receiver Data Inverted 20 VeeT Transmitter Ground Notes: 1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor. 2. Passive cable assemblies do not support LOS and TX_DIS EEPROM Serial ID Memory Contents Page 5 of 8

6 Copper SFP+ Cable Assemblies Data Size Address (Bytes) Name of Field Contents(Hex) Description BASE ID FIELDS 0 1 Identifier 03 SFP 1 1 Ext. Identifier 04 SFP function is defined by serial ID only 2 1 Connector 21 Copper Pigtail Transceiver FF Transceiver Codes 11 1 Encoding 01 8B10B 12 1 BR, Nominal XX 13 1 Reserved Length (9μm) km Length (9μm) 100m Length (50μm) 10m Length(62.5μm)10m Length (Copper) Reserved XX Vendor name XX 36 1 Reserved Vendor OUI Vendor PN XX Vendor rev XX Wavelength Reserved CC_BASE Check Sum (Variable) EXTENDED ID FIELDS Options BR,max BR,min Vendor SN XX Serial Number of transceiver (ASCII). For example B Date code XX Manufactory date code. For example Diagnostic Monitoring Type Enhanced Options SFF_8472 Compliance CC_EXT Check Sum (Variable) VENDOR SPECIFIC ID FIELDS Vendor specific XX Vendor specific Page 6 of 8

7 Copper SFP+ Cable Assemblies EEPROM Reserved XX Reserved for SFF-8079 Mechanical Specifications Obtaining Document You can visit our website: Or contact listed at the end of the documentation to get the latest documents. Revision History Revision Initiated Review Approved Revision History Release Date V1.a Cathy Released. September 26, 2010 V1.b Arvin Kelly Update the application, the mechanical and the electric of Tx and Rx V1.c Arvin Kelly ADD EOLP-96-CLB V1.d Frank Kelly Add new types Frank Kelly, Grace, Picasso Add new types Page 7 of 8

8 Notice: Copper SFP+ Cable Assemblies Eoptolink reserves the right to make changes to or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Eoptolink makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Contact: Add: Floor 5, Building 2, No. 21 Gaopeng Avenue, High-Tech District, CHENGDU, SICHUAN P.R. CHINA Tel: (+86) ext 816 & 809 Fax: (+86) Postal: Page 8 of 8