QSFP+ Series Preliminary EOLQ-8540G-03-MO Series
|
|
- Dylan Lee
- 6 years ago
- Views:
Transcription
1 EOLQ-8540G-03-MO Series Multi-Mode 40GBASE-SR4 QSFP+ Transceiver RoHS6 Compliant Features Compliant to the IEEE 802.3ba(40GBASE-SR4) Support interoperability with IEEE 802.3ae 10GBASE-SR modules of various form factors such as SFP+, XFP, X2 Compliant to the QSFP+ MSA SFF-8436 Specification Up to 300m on OM3 and 400m on OM4 MMF VCSEL array transmitter and PIN array receiver Single 3.3V Power Supply and Power dissipation < 1.5W Operates at Gbps per channel Operating Case Temperature: 0 ~+70 I 2 C interface with integrated Digital Diagnostic Monitoring Applications 40GBE and 10GBE interconnects Datacom/Telecom switch & router connections Data aggregation and backplane applications Utilizes a standard 12/8 lane optical fiber with MPO connector Ordering Information Part No. Data Rate Fiber Distance * (note1) Interface Temp. DDMI EOLQ-8540G-03-MO 40Gbps MMF 300m/400m MPO 0 ~+70 Yes Note1: 300m with OM3 and 400m with OM4 MMF Page 1 of 7
2 Regulatory Compliance* QSFP+ Series Preliminary Product Certificate Certificate Number Applicable Standard TUV UL R E EMC CE AE CB JPTUV EN :2006+A11+A1+A12 EN :2007 EN :2004+A1+A2 UL CSA C22.2 No EN 55022:2010 EN 55024:2010 IEC IEC FCC WTF14F E 47 CFR PART 15 OCT., 2013 FDA CDRH ROHS RHS01G /65/EU *The above certificate number updated to June 2014, because some certificate will be updated every year, such as FCC, FDA and ROHS. For the latest certification information, please check with Eoptolink. Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Storage Temperature Ts C Supply Voltage Vcc V Operating Relative Humidity RH 5 85 % *Exceeding any one of these values may destroy the device immediately. Recommended Operating Conditions Parameter Symbol Min. Typical Max. Unit Operating Case Temperature T c EOLQ-8540G-03-MO C Power Supply Voltage Vcc V Power Supply Current Icc 475 ma Aggregate Bit Rate BR AVE Gbps Lane Bit Rate BR LANE Gbps Performance Specifications - Electrical Parameter Symbol Min. Typ. Max Unit Notes Transmitter Referred to Single ended input V TP1 signal voltage tolerance common AC common mode input 15 mv RMS voltage tolerance Input Impedance Zin ohms Rin > 100 Page 2 of 7
3 (Differential) TX Disable QSFP+ Series Preliminary Disable V IH 2 Vcc+0.3 Enable V IL TX FAULT Fault V OH 2.4 Vcc+0.3 Normal V OL V Receiver Single ended output voltage V AC common mode voltage Termination mismatch at 1MHz Output Impedance (Differential) V DC Referred to signal common 7.5 mv RMS 5 % Zout ohms Output Rise/Fall Time t r /t f 30 ps 10%~90% RX_LOS LOS V OH 2.4 Vcc+0.3 V Normal V OL V Optical and Electrical Characteristics Parameter Symbol Min. Typical Max. Unit OM3 MMF L m Aggregate Bit Rate BR AVE Gbps Per Lane Bit Rate BR LANE Gbps Transmitter Center Wavelength λ C nm RMS spectral width RMS nm Average Launch Power, Each Lane* (Note2) Pout/lane dbm Transmit OMA, per Lane TX_OMA/lane dbm Difference in launch power between any two lanes(oma) db Peak power, each lane dbm Transmitter and dispersion penalty, each lane TDP/lane db Extinction Ratio* (Note3) ER db Optical Return Loss Tolerance db Average launch power of OFF, each lane dbm Output Optical Eye* (Note3) IEEE 802.3ba-2010 Compliant TX Disable Assert Time t_off us Receiver Center Wavelength λ C nm Damage Threshold db Page 3 of 7
4 Stressed receiver sensitivity in OMA, each lane* (note5) Pmins dbm Maximum Receive Power, each lane Pmax dbm Average power, each lane RX/lane dbm LOS De-Assert, OMA LOSD dbm Receiver reflectance Rr db LOS Assert LOSA dbm LOS Hysteresis* (Note6) db Note2: Output is coupled into a 50/125μm multi-mode fiber. Note3: Filtered, measured with a PRBS test Note4: High speed I/O, internally AC coupled. Note5: Minimum average optical power measured at BER less than 1E-12, with a PRBS. Note6: LOS Hysteresis Functional Description of Transceiver Tx1 Laser Driver VCSEL Tx2 Tx3 Tx4 Host Interface Electrical Interface MPO Limiting Amplifier PIN /TIA Rx1 Rx2 Rx3 Rx4 Page 4 of 7
5 QSFP+ Transceiver Electrical Pad Layout QSFP+ Series Preliminary Pin Arrangement and Definition Pin Logic Symbol Description Page 5 of 7 Plug Sequence 1 GND Ground CML-I Tx2n Transmitter Inverted Data Input 3 3 CML-I Tx2p Transmitter Non-Inverted Data Input 3 4 GND Ground CML-I Tx4n Transmitter Inverted Data Input 3 6 CML-I Tx4p Transmitter Non-Inverted Data Input 3 7 GND Ground LVTTL-I ModSelL Module Select 3 9 LVTTL-I ResetL Module Reset 3 10 VccRx +3.3V Power Supply Receiver LVCMOS- I/O SCL 2-wire serial interface clock 3 12 LVCMOS- I/O SDA 2-wire serial interface data 3 13 GND Ground CML-O Rx3p Receiver Non-Inverted Data Output 3 15 CML-O Rx3n Receiver Inverted Data Output 3 16 GND Ground CML-O Rx1p Receiver Non-Inverted Data Output 3 18 CML-O Rx1n Receiver Inverted Data Output 3 19 GND Ground GND Ground CML-O Rx2n Receiver Inverted Data Output 3 Notes
6 22 CML-O Rx2p Receiver Non-Inverted Data Output 3 23 GND Ground CML-O Rx4n Receiver Inverted Data Output 3 25 CML-O Rx4p Receiver Non-Inverted Data Output 3 26 GND Ground LVTTL-O ModPrsL Module Present 3 28 LVTTL-O IntL Interrupt 3 29 VccTx +3.3V Power supply transmitter Vcc1 +3.3V Power supply LVTTL-I LPMode Low Power Mode 3 32 GND Ground CML-I Tx3p Transmitter Non-Inverted Data Input 3 34 CML-I Tx3n Transmitter Inverted Data Input 3 35 GND Ground CML-I Tx1p Transmitter Non-Inverted Data Input 3 37 CML-I Tx1n Transmitter Inverted Data Input 3 38 GND Ground 1 1 1: GND is the symbol for signal and supply (power) common for the QSFP+ module. All are common within the QSFP+ module and all module voltages are referenced to this potential unless otherwise noted. Connect these directly to the host board signal-common ground plane. 2: Vcc Rx, Vcc1 and Vcc Tx are the receiver and transmitter power supplies and shall be applied concurrently. Requirements defined for the host side of the Host Edge Card Connector are listed in Table 6. Recommended host board power supply filtering is shown in Figures 3 and 4. Vcc Rx Vcc1 and Vcc Tx may be internally connected within the QSFP+ Module in any combination. The connector pins are each rated for a maximum current of 500mA. Mechanical Specifications Page 6 of 7
7 Obtaining Document You can visit our website: Or contact listed at the end of the documentation to get the latest documents. Revision History Revision Initiated Reviewed Approved Revision History Release Date Michael Jason Preliminary Mar 12,2015 Notice: Eoptolink reserves the right to make changes or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Eoptolink makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Contact: Add: Floor 5, Building 2, No. 21 Gaopeng Avenue, High-Tech District, CHENGDU, SICHUAN P.R. CHINA Tel: (+86) ext 816 or 809 Fax: (+86) Postal: Page 7 of 7
QSFP+ Series. EOLQ-1640G-10 Series. Features. Applications. Ordering Information. Single-Mode 40GBASE-LR4 QSFP+ Transceiver RoHS6 Compliant
EOLQ-1640G-10 Series Single-Mode 40GBASE-LR4 QSFP+ Transceiver RoHS6 Compliant Features Compliant to the IEEE 802.3ba(40GBASE-LR4) Compliant to the QSFP+ MSA SFF-8436 Specification Up to 10km over SMF
More information40GBASE-ER4 Ethernet Industrial: -40 C to 85 C. Infiniband QDR and DDR Four 10G DFB base CWDM channels on. Distance * (note2) Interface Temp.
EOLQ-1640G-40-X Series QSFP+ Series Preliminary Single-Mode 40GBASE-ER4 QSFP+ Transceiver RoHS Compliant Features Supports 40Gbps Single 3.3V Power Supply Commercial Power dissipation
More informationPart No. Data Fiber Distance Interface Temp. DDMI. CFP-100G-SR10-C 100Gbps MMF 100m/150m MPO 0 ~+70 Yes
CFP-100G-SR10-C CFP 1310 nm wavelength 100GbE Transceiver Product Features Compliant to the IEEE 802.3ba(100GBASE-SR10) Support interoperability with IEEE 802.3ae 10GBASE-SR modules of various form factors
More informationOPENETICS. P/N Gb/sQSFP+SR4Transceiver PRODUCT FEATURES APPLICATIONS STANDARD. Specialist Manufacturer Voice Data Security.
P/N 21227. 40Gb/sQSFP+SR4Transceiver PRODUCT FEATURES High Channel Capacity: 40 Gbps per module Up to 11.1Gbps Data rate per channel Maximum link length of 100m links on OM3 multimode fiber Or 150m on
More informationXFP CWDM BIDI Series Preliminary
EOLX-BI1696-S-9XPL Series CWDM Single-Mode Pigtail with LC/APC Connector for 10GbE/10FC Bi-directional XFP Transceiver with same wavelength of TX/RX RoHS 6 Compliant Features Supports 9.95Gb/s to 11.3Gb/s
More informationSFP28 Series Preliminary EOLP-8525G-02-R. Features. Applications. Ordering information
EOLP-8525G-02-R SFP28 Series Preliminary 850nm SFP28 Multi-Mode Transceiver, With Diagnostic Monitoring and Dual CDR Duplex SFP28 Transceiver, RoHS 6 Compliant Features Operating data rate up to 25.78Gbps
More informationSFF Series EOLF Series
EOLF-8524-02 Series Multi-Mode 850nm 2.5Gbps Duplex SFF Transceiver RoHS6 Compliant Features Duplex LC Multi-Mode Transceiver Operating Data Rate up to 2.5Gbps 850nm VCSEL Laser Transmitter 300m with 50/125µm
More informationEOLC-161HG-C-40-L1A Series
EOLC-161HG-C-40-L1A Series Single-Mode OTU4 4L1-9C1F CFP2 Transceiver Single-Mode 100GBASE-ER4 CFP2 Transceiver RoHS6 Compliant CFP2 Series Preliminary Features Supports 103Gbps and 112Gbps aggregate bit
More information100G QSFP28 LR4 Receiver
100G QSFP28 LR4 Receiver Datasheet Features: 4 independent LAN-WDM channels Up to 28Gbps data rate per channel Hot-pluggable QSFP28 form factor Digital diagnostic capabilities Maximum link length of 10km
More information40-Gbps QSFP + Optical Transceiver Module
40-Gbps QSFP + Optical Transceiver Module DESCRIPTION P/N: QSFP-40G-SR Our Quad Small Form-factor Pluggable Plus (QSFP + ) product is a new high speed pluggable I/O interface products. This interconnecting
More information850nm SFP28 Multi-Mode Transceiver, With Diagnostic Monitoring and Dual CDR Duplex SFP28 Transceiver, RoHS 6 Compliant. Fiber Type.
EOLP-8528G-02-RI SFP28 Series Preliminary 850nm SFP28 Multi-Mode Transceiver, With Diagnostic Monitoring and Dual CDR Duplex SFP28 Transceiver, RoHS 6 Compliant Features Operating data rate at 25.78Gbps
More informationSFF Series EOLF Series EOLF Series
EOLF-1303-15 Series EOLF-1303-40 Series Single Mode 1310nm 100M/155M SDH/SONET Duplex SFF Transceiver RoHS6 Compliant Features Duplex LC Single-Mode Transceiver Operating Data Rate up to 155Mbps 15km with
More information10G PON Series Preliminary
10G PON Series EOLX-PX-GT-30 Compliant with ITU-T G.987.2 N1 Class Single fiber bi-directional Transceiver 2.488Gbps upstream and 9.953Gbps downstream RoHS6 Compliant Features XFP MSA package with SC receptacle
More informationSO-QSFP28-SR4. QSFP, 100GBASE-SR, 850nm, MM, MPO OVERVIEW PRODUCT FEATURES APPLICATIONS ORDERING INFORMATION DATASHEET 4.
SO-QSFP28-SR4 QSFP, 100GBASE-SR, 850nm, MM, 100m@OM4, MPO OVERVIEW Th SO-QSFP28-SR4 is a parallel 100 Gbps Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and
More informationT Q S Q 1 4 H 9 J 8 2
Specification Quad Small Form-factor Pluggable Optical Transceiver Module 100GBASE-SR4 Ordering Information T Q S Q 1 4 H 9 J 8 2 Model Name Voltage Category Device type Interface Temperature Distance
More informationSFF Series. EOLF Series. Features. Applications. Ordering Information. Multi-Mode 850nm 1250Mbps Duplex SFF Transceiver RoHS6 Compliant
EOLF-8512-02 Series Multi-Mode 850nm 1250Mbps Duplex SFF Transceiver RoHS6 Compliant SFF Series Features Duplex LC Multi-Mode Transceiver Operating Data Rate up to 1250Mbps 850nm VCSEL Laser Transmitter
More informationXFP BIDI Series EOLX-BI1696-9ADL & EOLX-BI1696-9DAL
EOLX-BI1696-9ADL & EOLX-BI1696-9DAL Tx: 1270nm/Rx: 1330nm BIDI XFP Transceiver for 10GbE/10FC Tx: 1330nm/Rx: 1270nm BIDI XFP Transceiver for 10GbE/10FC RoHS 6 Compliant Features Supports 9.95Gb/s to 11.3Gb/s
More informationQSFP, 40GBase-SR, 850nm, MM, MPO
SO-QSFP-eSR4 QSFP, 40GBase-SR, 850nm, MM, 300m@OM3, MPO OVERVIEW The SO-QSFP-eSR4 is a parallel 40 Gbps Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total
More informationSFP+ Series EOLP M-I. Features. Applications. Ordering information
EOLP-1396-2M 1310nm SFP+ Multi-Mode for 10GBASE-LRM Duplex SFP+ Transceiver 0.6~10Gb/s CPRI/OBSAI RoHS 6 Compliant SFP+ Series Features Operating data rate up to 11.3Gbps 1310nm FP Transmitter Distance
More informationCisco QSFP-40G-SR4. Part Number: QSFP-40G-SR4 PRODUCT FEATURES APPLICATIONS. FluxLight, Inc
Part Number: QSFP-40G-SR4 The QSFP-40G-SR4 is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total system cost savings. The QSFP+ full-duplex
More informationXFP Series. JCxxxx-XFP-LC.S40. Features. Applications. Ordering Information
JCxxxx-XFP-LC.S40 CWDM XFP Single-Mode for 10 GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS6 Compliant Features Supports 9.95Gb/s to 11.1Gb/s Bit Rates Hot-Pluggable XFP Footprint Compliant with XFP
More informationGPON ONU Series. EOLF-GU5-25-P Series. Features. Applications. Ordering Information. Case Temperature. Part No. Input Output Burst-mode Interface
EOLF-GU5-25-P Series Class B+ ONU for GPON Single Fiber Bi-Directional WDM Transceiver 1.244Gbps Upstream and 2.488Gbps Downstream RoHS6 Compliant Features 2X5 SFF Package With SC Pigtail 1.244Gbps, 1310nm
More informationSFP+ BIDI Series JB1270-SFP-LC.S40. Features. Applications. Ordering information
JB1270-SFP-LC.S40 Tx: 1270nm/Rx: 1330nm BIDI SFP+ Transceiver for 10GbE RoHS 6 Compliant Features Operating data rate up to 11.3Gbps 1270nm DFB Transmitter/ 1330nm Receiver Power budget 16dB at least Single
More informationCisco QSFP-40G-SR4 MPO, 850nm,MMF, 150m. Cisco QSFP-40G-SR4 Quick Spec:
Part Number: Quick Spec: Form Factor: TX Wavelength: Reach: Cable Type: Rate Category: Interface Type: DDM: Connector Type: Optical Power Budget: TX Power Min/Max: RX Power Min/Max: QSFP 850nm 150m MMF
More informationQSFP+ Dual LC 40G SMF 10km Transceiver. Features. Applications. Ordering Information APPLIED OPTOELECTRONICS, INC.
Features Applications 40 Gigabit Ethernet (41.25Gbps) QSFP+ Type Dual LC Transceiver 4 x CWDM (1270/1290/1310/1330 nm) PIN Photo Detector -5 C to +70 C case operating temperature range 10Km transmission
More information40Gb/s QSFP+ esr4 Optical Transceiver Module QSFP-4000-ESR4. Product Specification
40Gb/s QSFP+ esr4 Optical Transceiver Module QSFP-4000-ESR4 Product Specification Features 4 independent full-duplex channels Up to 11.2Gb/s data rate per channel MTP/MPO optical connector QSFP+ MSA compliant
More informationT Q S Q 7 4 H 9 J C A
Specification Quad Small Form-factor Pluggable Optical Transceiver Module 100GBASE-SR4 Ordering Information T Q S Q 7 4 H 9 J C A Model Name Voltage Category Device type Interface Temperature Distance
More informationCopper QSFP28 Cable Preliminary
EOLQ-1HG-C-XX Copper QSFP28 Cable Preliminary QSFP Cable Assemblies, 0.5m/1m/2m/3m/4m/5m Reach RoHS6 Compliant Features Supports 103.125Gb/s and 111.8Gb/s bit rates Lower Power Consumption for Single Module
More informationArista 40GBASE-XSR4-AR. Part Number: 40GBASE-XSR4-AR 40GBASE-XSR4-AR OVERVIEW APPLICATIONS PRODUCT FEATURES. FluxLight, Inc
Part Number: 40GBASE-XSR4-AR 40GBASE-XSR4-AR OVERVIEW The 40GBASE-XSR4-AR is a parallel 40 Gbps Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total system
More information10GBASE-PR-D3 application CML interface logic level for Gbps data. Part No. Input Output Fiber Interface Temperature AC/10G DC/1G
EOLX-PR-GET-30 Series Compliant with IEEE 802.3av -2009 10GBASE-PR-D3 Single fiber bi-directional Transceiver 10.3125Gbps upstream and 10.3125Gbps downstream RoHS6 Compliant Features XFP Package with SC
More informationBIDI SFP Series. Part No. Data Rate Wavelength Interface Temp. DDMI
GB1310-SFP-SC.S10 GB1550-SFP-SC.S10 Single-Mode 100Mbps to 1.25Gbps FE/GBE SC Single-Fiber SFP Transceiver RoHS6 Compliant Features Support 1.25Gbps Data Links A type: 1310nm FP TX /1550nm RX B type: 1550nm
More informationPRE-QSFP28-SR4 100Gb/s QSFP28 Optical Transceiver, 100m
Product Features: -4 independent full-duplex channels -Up to 28Gb/s data rate per channel -QSFP28 MSA compliant -Compliant to IEEE 802.3bm 100GBASE-SR4 -Up to 100m OM4 MMF transmission -Operating case
More informationQSFP28 100G MPO MMF 850nm 70m Transceiver AQPMDN85ADLN0782. Features. Applications. Ordering Information APPLIED OPTOELECTRONICS, INC.
Features Applications 1Gb/s Ethernet 1GBASE SR4 Proprietary multi channel links QSFP28 MPO Type Transceiver 850nm VCSEL Laser 1Gb/s aggregated bidirectional data throughput Contain clock and data recovery
More informationDWDM SFP+ Series DWDM EML DWDM EML
EOLP-1696-23XXN MSA Series SFP+ Single-Mode for DWDM Application Duplex SFP+ Transceiver Digital Diagnostic Function RoHS6 Compliant Features Supports up to 11.3Gbps Available in all C-Band Wavelengths
More information100-Gbps QSFP28 SR4 Optical Transceiver Module PN: WST-QS28-SR4-C
Data Sheet 100-Gbps QSFP28 SR4 Optical Transceiver Module PN: General Description WaveSplitter s 100G-SR4 optical transceiver module (100G-SR4 TRx) with Quad Small Form-Factor Pluggable 28 (QSFP28) form-factor
More informationQSFP Gbps QSFP28 PSM4 Optical Transceiver Module. Features
KQFP-T-QZ23-2101 Absolute Maximum Ratings Features 4 independent full-duplex channels Up to 28Gb/s data rate per channel QSFP28MSA compliant Compliant to IEEE 802.3bm 100GBASE PSM4 Up to 2km reach for
More informationQSFP-100G-SR4-AR-LEG. 100Gbase QSFP28 Transceiver
Part# 39581 QSFP-100G-SR4-AR-LEG ARISTA NETWORKS COMPATIBLE 100GBASE-SR4 QSFP28 MMF 850NM 100M REACH MPO DOM QSFP-100G-SR4-AR-LEG 100Gbase QSFP28 Transceiver Features Four-Channel full-duplex transceiver
More informationQSFP-40GBase-eSR4 MPO, 850nm, MMF, 300m. QSFP-40GBase-eSR4-IND. Quick Spec:
Part Number: Quick Spec: QSFP-40GBase-eSR4 QSFP-40GBase-eSR4-IND Form Factor: TX Wavelength: Reach: Cable Type: Rate Category: Interface Type: DDM: Connector Type: Optical Power Budget: TX Power Min/Max:
More informationSPQ-10E-SR-CDFG 40G QSFP+ Transceiver
Features Compliant to the Industry Standard SFF-8436 QSFP+ Specification Revision 4.8 Compliant with IEEE 802.3ba 40GBASE-SR4 Interoperable with IEEE 10GBASE-SR Single 3.3V Supply Voltage Max. Power
More informationArista Networks QSFP-100G-SR4-AR. Part Number: QSFP-100G-SR4-AR QSFP-100G-SR4-AR OVERVIEW PRODUCT FEATURES APPLICATIONS.
Part Number: QSFP-100G-SR4-AR QSFP-100G-SR4-AR OVERVIEW Th QSFP-100G-SR4-AR is a parallel 100 Gbps Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total
More informationCopper QSFP28 Cable. QSFP28 Passive Cable Assemblies, 0.4m/1m/1.5m/2m/2.5m/3m Reach RoHS6 Compliant
EOLQ-1HG-C-XX-XXP Copper QSFP28 Cable QSFP28 Passive Cable Assemblies, 0.4m/1m/1.5m/2m/2.5m/3m Reach RoHS6 Compliant Features Supports 103.125Gb/s, 111.8Gb/s and 112.2Gb/s bit rates Lower Power Consumption
More informationSFP Series. EOLS-BI Series EOLS-BI Series. Features. Applications. Ordering information
EOLS-BI1324-15 40 Series EOLS-BI1524-15 40 Series Single-Mode 2.5Gbps SDH /SONET/FC Simplex LC Single-Fiber SFP Transceiver RoHS6 Compliant Features Support up to 2.5Gbps data links A type: 1310nm DFB
More informationCopper QSFP28 Cable. Part No. Data rate(per lane) Length AWG Passive/Active Temp
EOLQ-1HG-C-XX-30 Copper QSFP8 Cable QSFP Cable Assemblies, With 1 RX CDR, 0.4m/0.5m/1m/m/3m Reach RoHS6 Compliant Features Supports 103.15Gb/s, 111.8Gb/s and 11.Gb/s bit rates Lower Power Consumption for
More informationDWDM SFP+ Series DWDM EML
DJxx-SFP-LC.S80 Series SFP+ Single-Mode for DWDM Application Duplex SFP+ Transceiver Digital Diagnostic Function RoHS6 Compliant DWDM SFP+ Series Features Supports up to 11.3Gbps Available in all C-Band
More information1550nm SFP+ single-mode Transceiver, With Diagnostic Monitoring Duplex SFP+ Transceiver RoHS 6 Compliant
EOLP-1596-80-N Series 1550nm SFP+ single-mode Transceiver, With Diagnostic Monitoring Duplex SFP+ Transceiver RoHS 6 Compliant SFP+ Series Features 1550nm cooled EML High sensitivity APD Receiver Distance
More informationDWDM SFP+ single-mode Transceiver, With Diagnostic Monitoring Multi-rate 16x / 8x / 4x Fibre Channel Duplex SFP+ Transceiver, RoHS 6 Compliant
EOLP-1614G-14XXXRN DWDM SFP+ single-mode Transceiver, With Diagnostic Monitoring Multi-rate 16x / 8x / 4x Fibre Channel Duplex SFP+ Transceiver, RoHS 6 Compliant Features Operating data rate up to 14.025Gbps
More informationDATASHEET 4.1. QSFP, 40GBase-LR, CWDM nm, SM, DDM, 6.0dB, 10km, LC
SO-QSFP-LR4 QSFP, 40GBASE-LR, CWDM 1270-1330nm, SM, DDM, 6.0dB, 10km, LC OVERVIEW The SO-QSFP-LR4 is a transceiver module designed for optical communication applications up to 10km. The design is compliant
More informationT C W Q 1 L A A K C Q
Specification 40 Gbps QSFP+ Pluggable Optical Transceiver Module 40GBASE-ER4 Ordering Information T C W Q 1 L A A K C Q Model Name Voltage Category Device type Interface Temperature Distance Latch Color
More information40 Gigabit QSFP 850 nm QSFP SR4
Features 4 independent full-duplex channels Up to 11.2Gbps data rate per channel MTP/MPO optical connector QSFP MSA compliant Digital diagnostic capabilities Capable of over 100m transmission on OM3 multi-mode
More informationArista QSFP-40G-PLR4. Part Number: QSFP-40G-PLR4 QSFP-40G-PLR4 OVERVIEW PRODUCT FEATURES APPLICATIONS FUNCTIONAL DIAGRAM.
Part Number: QSFP-40G-PLR4 QSFP-40G-PLR4 OVERVIEW The QSFP-40G-PLR4 is a parallel 40 Gbps Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total system cost
More informationSFP Series EOLS X. Features. Applications. Ordering Information
EOLS-8531-02-X Multi-Mode 850nm 3.072/2.4576 Gb/s Duplex SFP Transceiver RoHS OBSAI/CPRI Compatible Features Operating Data Rate up to 3.072Gbps 850nm VCSEL Laser Transmitter Up to 400m with 50μm OM3 for
More information40Gb/s QSFP+ LR4 Parallel Single Mode Optical Transceiver TR-IQ13L-N00. Product Specification
40Gb/s QSFP+ LR4 Parallel Single Mode Optical Transceiver TR-IQ13L-N00 Product Specification Features 4 Parallel lanes design Up to 11.2Gb/s data rate per channel Aggregate Bandwidth of up to 44.0G QSFP+
More informationSFP Series. EOLS X Series. Features. Applications. Ordering Information
EOLS-1331-07-X Series Single-Mode 1310nm 3.072/2.4576Gb/s for OBSAI/CPRI Duplex SFP Transceiver RoHS Compliant Features Operating Data Rate up to 3.072Gbps 1310nm FP Laser Transmitter Up to 7km with 9µm
More information40GBd QSFP+ LR4 Optical Transceiver
Preliminary DATA SHEET CFORTH-QSFP-40G-LR4 40GBd QSFP+ LR4 Optical Transceiver CFORTH-QSFP-40G-LR4 Overview CFORTH-QSFP-40G-LR4 QSFP+ LR4 optical transceivers are based on Ethernet IEEE P802.3ba standard
More informationXFP Series. JCxxxx-XFP-LC.S80. Features. Applications. Ordering Information
JCxxxx-XFP-LC.S80 CWDM XFP Single-Mode for 10GbE/10GFC Duplex XFP Transceiver RoHS6 Compliant Features Supports 9.95Gb/s to 11.1Gb/s Bit Rates Hot-Pluggable XFP Footprint Compliant with XFP MSA 4-Wavelengths
More informationDWDM SFP+ Series. EOLP XXXN series. Features. Applications. Ordering Information
EOLP-1696-14XXXN series SFP+ Single-Mode for DWDM Application Duplex SFP+ Transceiver Digital Diagnostic Function 0.6~10Gb/s CPRI/OBSAI RoHS6 Compliant DWDM SFP+ Series Features Support data rate up to
More informationXFP Series EOLX X. Features. Applications. Ordering Information. CWDM XFP Single-Mode for 10GbE/10GFC Duplex XFP Transceiver RoHS6 Compliant
EOLX-1696-23X CWDM XFP Single-Mode for 10GbE/10GFC Duplex XFP Transceiver RoHS6 Compliant XFP Series Features Supports 9.95Gb/s to 11.1Gb/s Bit Rates Hot-Pluggable XFP Footprint Compliant with XFP MSA
More informationCFORTH-QSFP28-100G-LR4 Specifications Rev. D00B. Product Features
Preliminary DATA SHEET CFORTH-QSFP28-100G-LR4 100G QSFP28 LR4 Optical Transceiver CFORTH-QSFP28-100G-LR4 Overview CFORTH-QSFP28-100G-LR4 QSFP28 LR4 optical transceivers are based on 100G Ethernet IEEE
More informationSFP+ Tunable Preliminary. EOLP-1696-TDW-23XXXN MSA Series. Features. Applications. Ordering Information
EOLP-1696-TDW-23XXXN MSA Series SFP+ Single-Mode Tunable Transceiver RoHS6 Compliant Features Support data rate 0.614 to 11.3Gbps 1550 nm ITU-T C-band 50 GHz spacing Tunable DWDM SFP+ Transceiver Temperature-Stabilized
More information40G-PSM4 QSFP+ Transceiver
40G-PSM4 QSFP+ Transceiver Pb Product Description The is a hot pluggable fiber optic transceiver in the QSFP+ form factor with digital diagnostics monitoring functionality (DDM) and control function. The
More informationDWDM SFP Series. Laser
DGxx-SFP-LC.S160 Series SFP Single-Mode for DWDM Application Duplex SFP Transceiver Digital Diagnostic Function RoHS6 Compliant DWDM SFP Series Features Operating Data Rate up to 1.25Gbps Available in
More informationLX8501CDR 100G 100m QSFP28 Transceiver 100GBASE-SR4
Product Features Compliant with IEEE Std 802.3bm,100G BASE SR4 Ethernet Compliant with QSFP28 MSA Management interface specifications per SFF-8636 Single MPO connector receptacle 4 channels 850nm VCSEL
More informationDWDM SFP+ single-mode Transceiver, With Diagnostic Monitoring Multi-rate 16x / 8x / 4x Fibre Channel Duplex SFP+ Transceiver, RoHS 6 Compliant
EOLP-1614G-14XRN SFP+16G Series Preliminary DWDM SFP+ single-mode Transceiver, With Diagnostic Monitoring Multi-rate 16x / 8x / 4x Fibre Channel Duplex SFP+ Transceiver, RoHS 6 Compliant Features Operating
More informationProduct Specification 40GE SWDM4 QSFP+ Optical Transceiver Module FTL4S1QE1C
1 Product Specification 40GE SWDM4 QSFP+ Optical Transceiver Module FTL4S1QE1C 9BPRODUCT FEATURES Hot-pluggable QSFP+ form factor 240m operation over duplex OM3 MMF (350m over OM4, 440m over OM5) Supports
More information40G-QSFP-ER4-LEG. 40Gbase QSFP+ Transceiver
Part# 39606 40G-QSFP-ER4-LEG BROCADE COMPATIBLE 40GBASE-ER4 QSFP+ SMF 1271-1331NM 30KM REACH LC DOM 40G-QSFP-ER4-LEG 40Gbase QSFP+ Transceiver Features Compliant with 40G Ehternet IEEE802.3ba and 40GBase-ER4
More informationXQM859-M1PY. 100 Gb/s QSFP28 SR4 Optical Transceiver. XQM859-M1PY QSFP28 SR4 Optical Transceiver. Features
Applications XQM859-M1PY 100 Gb/s QSFP28 SR4 Optical Transceiver Features QSFP28 MSA compliant Compliant to IEEE 802.3 bm 100GBASE- SR4 Four independent full-duplex channels Supports 103.1 Gb/s aggregate
More informationCWDM EML. SMF 23dB YES LC. note1: X refers to CWDM Wavelength range 1470nm to 1610nm, X=K~R, denotes 1470~1610nm.
EOLP-1696-23XRN MSA Series CWDM SFP+ Single-Mode for 10G application Duplex SFP+ Transceiver RoHS6 Compliant Features Hot-Pluggable SFP+ Footprint 8-Wavelengths CWDM EML from 1470nm to 1610nm, with step
More informationDWDM SFP Series. DIxx-SFP-LC.S120. Features. Applications. Ordering Information
DIxx-SFP-LC.S120 SFP Single-Mode for DWDM Application Duplex SFP Transceiver Digital Diagnostic Function RoHS6 Compliant DWDM SFP Series Features Operating Data Rate up to 2.67Gbps Available in all C-Band
More informationDWDM SFP+ Series. EOLP XXXN MSA Series. Features. Applications. Ordering Information
EOLP-1696-23XXXN MSA Series SFP+ Single-Mode for DWDM Application Duplex SFP+ Transceiver Digital Diagnostic Function 0.6~10Gb/s CPRI/OBSAI RoHS6 Compliant Features Support data rate up to 11.3Gbps Available
More informationSFP+ Series SFP-10G-SR
SFP-10G-SR 850nm SFP+ Multi-Mode Transceiver, With Diagnostic Monitoring 10G BASE-SW/SR Duplex SFP+ Transceiver, RoHS 6 Compliant Features Operating data rate up to 10.3Gbps 850nm VCSEL Distance up to
More informationSFP Module DB1310-SFP-SC.S20 DB1550-SFP-SC.S20. Features. Applications. Ordering information
DB1310-SFP-SC.S20 SFP Module DB1550-SFP-SC.S20 Single-Mode 100Mbps~155Mbps SC Single-Fiber SFP Transceiver RoHS6 Compliant Features Support 155Mbps Data Links A type: 1310nm FP TX / 1550nm RX B type: 1550nm
More informationDATA SHEET: Transceivers
ProLabs QSFP 40G ER4 C 40GBASE ER4 QSFP+ SMF 1271 1331NM 30KM REACH LC DOM DATA SHEET: Transceivers QSFP-40G-ER4-C Overview ProLabs QSFP 40G ER4 C Quad Small Form Factor Pluggable (QSFP+) transceivers
More informationGPON ONU Series. EOLF-GUA-25 Series. Features. Applications. Ordering Information. Input/ Output. Part No. Burst-mode DDMI Interface Case Temp.
EOLF-GUA-25 Series Class B+ ONU for GPON Single Fiber Bi-Directional WDM Transceiver 1.244Gbps Upstream and 2.488Gbps Downstream RoHS6 Compliant Features 2X10 SFF Package With SC/PC Receptacle, SC/APC
More information1310nm SFP+ single-mode Transceiver, With Diagnostic Monitoring 10G BASE-LW/LR 0.6~10Gb/s CPRI/OBSAI Duplex SFP+ Transceiver, RoHS 6 Compliant
EOLP-1396-20 Series 1310nm SFP+ single-mode Transceiver, With Diagnostic Monitoring 10G BASE-LW/LR 0.6~10Gb/s CPRI/OBSAI Duplex SFP+ Transceiver, RoHS 6 Compliant Features Operating data rate up to 11.3Gbps
More informationUtilizes a standard 24/20 lane optical fiber with MPO connector
Part# 39592 CFP-100GB-SR10-LEG 100GBASE-SR10 TRANSCEIVER MMF 850NM 150M MPO DOM Features Compliant to the CFP MSA Management Interface Specification Version 2.2 Compliant to the CFP Hardware Specification
More informationQSFP-40G-LR4-S-LEG. 40Gbase QSFP+ Transceiver
QSFP-40G-LR4-S-LEG CISCO 40GBASE-LR4 QSFP+ SMF 1270NM-1330NM 10KM REACH LC QSFP-40G-LR4-S-LEG 40Gbase QSFP+ Transceiver Features 4 CWDM lanes MUX/DEMUX design 4 independent full-duplex channels Up to 11.2Gbps
More informationSFP Series. Distance * (note2) Interface Temp. DDMI
EOLS-8524-02-X Multi-Mode 850nm FC /2FC Duplex SFP Transceiver RoHS6 Compliant Features Operating Data Rate up to 2.5Gbps 850nm VCSEL Laser Transmitter 550m with 50/125µm MMF 300m on 62.5/125µm MMF Single
More informationSFP+ BIDI Series EOLP-BI1696-9ADL & EOLP-BI1696-9DAL Series
EOLP-BI1696-9ADL & EOLP-BI1696-9DAL Series Tx: 1270nm/Rx: 1330nm BIDI SFP+ Transceiver for 10GbE Tx: 1330nm/Rx: 1270nm BIDI SFP+ Transceiver for 10GbE RoHS 6 Compliant Features Operating data rate up to
More informationCisco QSFP-100G-LR4-S. Part Number: QSFP-100G-LR4-S QSFP-100G-LR4-S OVERVIEW PRODUCT FEATURES APPLICATIONS. FluxLight, Inc
Part Number: QSFP-100G-LR4-S QSFP-100G-LR4-S OVERVIEW The QSFP-100G-LR4-S is a 100 Gbps transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba
More informationFTLD12CL3C. Product Specification 150 Gb/s (12x 12.5Gb/s) CXP Optical Transceiver Module PRODUCT FEATURES
Product Specification 150 Gb/s (12x 12.5Gb/s) CXP Optical Transceiver Module FTLD12CL3C PRODUCT FEATURES 12-channel full-duplex transceiver module Hot Pluggable CXP form factor Maximum link length of 100m
More informationDWDM SFP Series. Power budget* (note2) Laser
EOLS-1612-XXD Series SFP Single-Mode for DWDM Application Duplex SFP Transceiver Digital Diagnostic Function RoHS6 Compliant Features Operating Data Rate up to 1.25Gbps Available in all C-Band Wavelengths
More information40Gbps QSFP SR4 Optical Transceiver Module TR-QQ85S-N00. (Preliminary)
40Gbps QSFP SR4 Optical Transceiver Module TR-QQ85S-N00 (Preliminary) Features 4 independent full-duplex channels Up to 11.2Gbps data rate per channel MTP/MPO optical connector QSFP MSA compliant Digital
More informationProduct Specification RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver
Product Specification RoHS-6 Compliant 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver PRODUCT FEATURES Hot-pluggable XFP footprint Supports 9.95Gb/s to 10.5Gb/s bit rates Power dissipation
More informationSO-QSFP28-4xSFP28-AOCxM
SO-QSFP28-4xSFP28-AOCxM QSFP28 to 4xSFP28, 100G, AOC, xm OVERVIEW The SO-QSFP28-4xSFP28-AOCxM is a parallel active optical cable (AOC) which overcomes the bandwidth limitation of traditional copper cables.
More informationSFP-10G-SR-LEG. 10Gbs SFP+ Transceiver
SFP-10G-SR-LEG CISCO 10GBASE-SR SFP+ MMF 850NM 300M REACH LC DOM SFP-10G-SR-LEG 10Gbs SFP+ Transceiver Features Duplex LC connector Support hot-pluggable Metal with lower EMI Excellent ESD protection VCSEL
More informationXFP BIDI Series JB1330-XFP-LC.S60. Features. Applications. Ordering information. Regulatory Compliance
JB1330-XFP-LC.S60 XFP BIDI Series Tx: 1330nm/Rx: 1270nm BIDI XFP Transceiver for 10GbE/10FC RoHS 6 Compliant Features Supports 9.95Gb/s to 10.5Gb/s data rates Power budget 21dB at least 1330nm DFB Transmitter/
More informationLTA8531 QSFP28 SR4 Transceiver
he LTA8531 is a QSFP28 Optical transceiver for 4 x 25Gb/s optical links. It is compliant with the QSFP28 MSA, IEEE P802.3bm T 100GBASE- SR4 specifications. It operates at 25.78Gb/s up to 100m over OM4
More informationFiber Distance* (note2) Temp. Connector DDM
EOLS-BI1X03-2M Series Multi-Mode 155Mbps SC/LC Single-Fiber SFP Transceiver RoHS6 Compliant Features Operating data rate up to 155Mbps A type: 1310nm FP Tx/1550nm Rx B type: 1550nm FP Tx/1310nm Rx 2km
More informationQSFP28 Dual LC 100G SMF 2km Transceiver. Features. Applications. Ordering Information APPLIED OPTOELECTRONICS, INC.
Features Applications 100 Gigabit Ethernet Hot-pluggable QSFP28 form factor 4 x CWDM Uncooled DFB Laser (1270/1290/1310/1330 nm) PIN Photo Detector -5 C to +70 C case operating temperature range 2Km transmission
More informationSFP+ BIDI Series GigaStream BIDI-10G-SFP-40A & BIDI-10G-SFP-40B
GigaStream BIDI-10G-SFP-40A & BIDI-10G-SFP-40B Tx: 1270nm/Rx: 1330nm BIDI SFP+ Transceiver for 10GbE Tx: 1330nm/Rx: 1270nm BIDI SFP+ Transceiver for 10GbE RoHS 6 Compliant Features Operating data rate
More informationDWDM SFP Series. Power budget* (note2) Laser
EOLS-1648-XXD Series SFP Single-Mode for DWDM Application Duplex SFP Transceiver Digital Diagnostic Function RoHS6 Compliant Features Operating Data Rate up to 4.25Gbps Available in all C-Band Wavelengths
More informationSFP+ Cable Assemblies, 0.5m/1m/2m/3m/4m/5m/6m/7m/8m/9m/10m/11m/12m/15m Reach RoHS6 Compliant. Lengt
EOLP-96-CLB-XX Copper SFP+ Cable Assemblies SFP+ Cable Assemblies, 0.5m/1m/2m/3m/4m/5m/6m/7m/8m/9m/10m/11m/12m/15m Reach RoHS6 Compliant Features Supports 1Gb/s to 10.5Gb/s bit rates Support 1x, 2x, 4x
More informationShenzhen Opway Communication Co., Ltd. 100Gb/s QSFP28 LR4 Optical Transceiver (OPQE10)
Operating case temperature: 0~70oC Transmitter: cooled 4x25Gb/s LAN WDM TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) Receiver: 4x25Gb/s PIN ROSA 4x28G Electrical Serial Interface (CEI-28G-VSR) Maximum power
More informationProduct Specification 10km Multirate QSFP+ Optical Transceiver Module FTL4C1QM1C
Product Specification 10km Multirate QSFP+ Optical Transceiver Module FTL4C1QM1C PRODUCT FEATURES Hot-pluggable QSFP+ form factor Supports 39.8 Gb/s to 44.6 Gb/s aggregate bit rates Power dissipation
More informationSFP Series. EOLS-1348-X Series. Features. Applications. Ordering Information. Single-Mode 1310nm FC/2FC/4FC Duplex SFP Transceiver RoHS6 Compliant
EOLS-1348-X Series Single-Mode 1310nm FC/2FC/4FC Duplex SFP Transceiver RoHS6 Compliant Features Operating Data Rate up to 4.25Gbps 5km with 9/125 µm SMF 10km with 9/125 µm SMF 20km with 9/125 µm SMF 30km
More information40G-BASE-LR4 10km QSFP+ Optical Transceiver GTR3QP1L
Data Sheet Jun. 2013 40G-BASE-LR4 10km QSFP+ Optical Transceiver Features Hot Pluggable QSFP+ MSA package GTR3QP1L IEEE 802.3ba 40GBASE-LR4 compliant SFF-8436 and IEC61754-20 compliant Up to 10km for G.652
More informationT G W Q 1 4 B B F 8 1
Specification 100Gbps-LR4 QSFP28 10km Optical Transceiver Module Ordering Information T G W Q 1 4 B B F 8 1 Model Name Voltage Category Device type Interface Temperature Distance TGW-Q14BB-F81 3.3V With
More informationXFP Series EOLX X. Features. Applications. Ordering information
EOLX-1396-10-X 1310nm XFP single-mode for 10GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS6 Compliant Features Supports 9.95Gb/s to 11.3Gb/s bit rates Hot-pluggable XFP footprint Link length up to 10km
More informationSFP Series. Single-Mode 1310nm for GE, STM1/STM4/STM16, FC/2XFC Duplex SFP Transceiver RoHS6 Compliant. Distance * (note2) Interface Temp. DDMI.
EOLS-1324-02-X Series Single-Mode 1310nm for GE, STM1/STM4/STM16, FC/2XFC Duplex SFP Transceiver RoHS6 Compliant Features Operating Data Rate up to 2.5Gbps 1310nm FP Laser Transmitter 2km with 9/125 µm
More information100Gbs QSFP28 LR4 Optical Transceiver Module WT-QSFP28-LR4
100Gbs QSFP28 LR4 Optical Transceiver Module WT-QSFP28-LR4 Features Hot pluggable QSFP28 MSA form factor Compliant to IEEE 802.3ba 100GBASE-LR4 Up to 10km reach for G.652 SMF Single +3.3V power supply
More information