Serial Transmission Type (Integrated)
|
|
- Brett Cross
- 6 years ago
- Views:
Transcription
1 TypeS Series SX000/000 Base Mounted Manifold Stacking Type IN Rail Mounted Serial Transmission Type (Integrated) How to Order Manifold SSX S A 0 U 0 Series SX000 SX000 Symbol Specifications O Without A With general type (Series EX00) B Mitsubishi Electric Corp.: MELSECNET/MINI-S ata Link System C OMRON Corp.: SYSBUS Wire System SHARP Corp.: Satellite I/O Link System E Matsushita Electric Works: MEWNET-F System F NKE Corp.: Uni-wire System ( output points) Rockwell Automation: Allen Bradley Remote I/O (RIO) System H NKE Corp.: Uni-wire H System J SUNX Corp.: S-LINK System ( output points) J SUNX Corp.: S-LINK System ( output points) K Fuji Electric Co.: T-LINK Mini System Q evicenet, CompoBus/ (OMRON Corp.) R OMRON Corp.: CompoBus/S System ( output points) R OMRON Corp.: CompoBus/S System ( output points) Option U JEMANET (JPCN-) When a longer IN Mitsubishi Electric Corp.: CC-LINK System rail is desired than For the general purpose type, a the specified transmission unit is required on the stations, specify the CP. station number to be Even though when it is not equipped with, IN rail length is long enough for future required. (0 stations expectancy of mounting. maximum) alve stations Symbol Stations SUP/EXH block assembly 0 stations mounting position ouble wiring specifications Symbol Mounting position Stations 0 stations U to 0 stations 0 stations Applicable up to solenoids. Use to 0 stations the manifold specification sheet to B Both sides to stations specify the wiring specifications. stations M Special specifications This also includes the number of For special specifications, indicate blanking plate assemblies. separately by the manifold When special wiring is required on manifold with to stations, please specification sheet. use the manifold specification sheet. A, B port size (Metric size) (Inch size) Symbol Port size Applicable series Symbol Port size Applicable series C One-touch fitting for ø N One-touch fitting for ø/" C One-touch fitting for ø SX000 N One-touch fitting for ø/" SX000 C One-touch fitting for ø N One-touch fitting for ø/" C One-touch fitting for ø N One-touch fitting for ø/" SX000 C One-touch fitting for ø N9 One-touch fitting for ø/" SX000 In the case of mixed specifications (M), indicate separately on the manifold specification sheet. SI Unit Part No. Symbol Specifications For SSX -S A B C E F H With general type (Series EX00) Mitsubishi Electric Corp.: MELSECNET/MINI-S ata Link System OMRON Corp.: SYSBUS Wire System SHARP Corp.: Satellite I/O Link System Matsushita Electric Works: MEWNET-F System NKE Corp.: Uni-wire System ( output points) Rockwell Automation: Allen Bradley Remote I/O (RIO) System NKE Corp.: Uni-wire H System EX-S00 EX-SMB EX-STA EX-SSH EX-SPA EX-SUW EX-SAB EX-SUH How to Order alve Manifold Assembly Symbol J J K Q R R U Ordering example ouble solenoid (C) SX0-LOZ SSX-SA-0U-C set (S with serial -station manifold base no.) SX0-LOZ sets (Single solenoid part no.) SX0-LOZ sets (ouble solenoid part no.) They will be assembled in the order listed starting at the first station at the whether the connector box is located at either end. When ordering with the double wiring specification, specify it in order, beginning with the station on the. For manifolds with more than stations (9 to ), special wiring is required. Please use the manifold specification sheet. Serial unit can be mounted on only. Series SX000 SX000 Type of actuation position single position double position closed center Stations The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. How to Order alves SX 0 position exhaust center position pressure center Rated voltage C Nil Specifications LOZ Non-locking push type Push-turn locking slotted type SUNX Corp.: S-LINK System ( output points) SUNX Corp.: S-LINK System ( output points) Fuji Electric Co.: T-LINK Mini System evicenet, CompoBus/ (OMRON Corp.) OMRON Corp.: CompoBus/S System ( output points) OMRON Corp.: CompoBus/S System ( output points) JEMANET (JPCN-) Mitsubishi Electric Corp.: CC-LINK System Single solenoid (C) SX0-LOZ Manifold base ( stations) SSX-AS-0U-C For SSX -S EX-SSL EX-SSL EX-SFU EX-SN EX-SCS EX-SCS EX-SJN EX-SMJ --
2 Base Mounted Series SX000/000 The serial transmission system reduces wiring work, while minimizing wiring and saving space. Maximum stations (Specify a model with more than 9 stations by means of the manifold specification sheet.) Type SA Series EX00 Type SB Mitsubishi Electric Corporation MELSECNET/MINI-S ata Link System Stations Stations are counted from station on the. Maximum station: Up to solenoids ( single solenoids). Name of terminal block, TR Lighting during data reception RUN/ERR Blinking when received data is normal; Lighting when data reception Serial transmission is possible by connecting with I/O card of T unit PLC manufacturer. EX00-TMB for Mitsubishi Electric Corporation EX00-TTA for OMRON Corporation EX00-TFU for Fuji Electric Co., Ltd. EX00-T00 eneral purpose Each T unit has control points. No. of output point, points RUN R S ERR. Lighting when data transmission with the master station is normal Lighting during data reception Lighting during data reception Lighting when reception data error occurs Light turns off when the error is corrected MELSECNET/MINI-S ata Link System : AJPT-S AJT-S ASJPT-S No. of output point, points No. of sta. occupied, stations S SZ SY SYJ SX SI manifold solenoid valve Item External power Current consumption (Internal unit) Specifications C + 0%/ % SA, SB, S, SE, SF, S, 0. A SJ, SJ, SK, SR, SR 0. A SC, SQ J unit OB unit Remot I/O unit Remot I/O unit round either the reception side or the transmission side of the shielding wire shield. round either the reception side or the transmission side of the shielding wire shield. Type SC OMRON Corporation SYSBUS Wire System Type S SHARP Corporation Satellite I/O Link System Type SE Matsushita Electric Works, Ltd. MEWNET-F System Name of terminal block, RUN T/R ERR ON when transmission is normal and PLC is in operation mode. Blinks during data transmission/reception ON when transmission is abnormal ON when power is ON RUN ON when power is ON and slave unit operates normally ON for abnormal slave unit switch setting, ERROR abnormal communication, master unit PLC stopped and defective slave unit R.SET HOL ON for master unit control input COMM ALARM ON when power is ON Blinks when transmission is normal ON for unit abnormality, blinks for station no. setting error SYSBUS Wire System : Type C00-RM0 C00H-RH0 No. of output points, points Satellite I/O Link System : ZW-LM JW-LM JW-LM No. of output points, points MEWNET-F System : AFP0 AFP0 No. of output points, points a) -wire type Wiring without signal ground line (S) 0 0 Twisted pair with shield b) -wire type Wiring with signal ground line (S) 0 0 Twisted pair with shield --
3 Type SF NKE Corporation Uni-wire System Type S Rockwell Automation, Inc. Allen Bradley Remote I/O (RIO) System Type SJ, SJ SUNX Corporation S-LINK System Name of terminal block, SEN (ON when normal, flickers when voltage drops) Transmission indication: Blinks when normal, Blinks slowly when abnormal ON when power is ON ON when communication is normal COM. Blinks when communication is initialized OFF for abnormal communication ERROR ON for abnormal communication SEN Transmission indication: Blinks when normal, Blinks slowly when abnormal Wiring Simplifying System Send unit: S-0 Remote I/O (RIO) System S-LINK System S-LINK Controller: SL-CU (Type SJ) No. of output points, points (Type SJ) Transmission line { { { resistor a) Type T branching multi-drop wiring (S-LINK System) Black White Main transmission line Brown Blue Crimped connector SL-JA b) Crossover wiring (Sensor Link System) Transmission line { The above is the example of using dedicated S-LINK flat ribbon cable SL-RCM l00. Type SK Fuji Electric Co. Ltd. T-LINK Mini System Type SQ evicenet Type SR, SR OMRON Corporation CompoBus/S System Name of terminal block, SEN ON when communication power is supplied, OFF when power is OFF MO/ NET reen light ON with circuit power input It turns OFF when unit and circuit are not powered reen light ON continuously: When the unit is online and in operation Red light blinks when an abnormal transmission is generated in the unavailable circuit. Red light turns ON when an abnormal transmission is generated in the unavailable circuit or neither unit or circuit is available. COMM ERR Light ON with transmission power input, light Off without it ON for normal communication, OFF for abnormal communication or waiting ON for abnormal communication, OFF for normal communication or waiting T-LINK Mini System : FTM00B Converter: FRC00A-0 Repeater: FRC00A-C0 evicenet OMRON Corp s CompoBus/ System Master station unit: C00HW-SM CompoBus/S System Master station unit: C00HW-SRM Master station unit: CQM-SRM (Type SR) No. of output points, points (Type SR) Twisted pair with shield Connect the shielding wire to the S terminal. If the shielding wire is not connected to the S terminal, normal transmission will be impossible even for short distances. Furthermore, do not ground the shielding wire (S). Connector with end resistance Crimping connector for division --
4 O N Base Mounted Series SX000/000 Type SH NKE Corporation Uni-wire H System Type SU JEMANET (JPCN-) Type S Mitsubishi Electric Corporation CC-LINK System Name of terminal block, SEN (ON when normal, flickers when voltage drops) SEN Transmission indication: Blinks when normal, Transmission indication: OFF or ON when abnormal Uni-wire H System Send unit: S-H ARESS ON OFF COMM ALARM COMM ALARM A B S ON for power input On for normal communication ON for abnormal communication JEMANET (JPCN-) (Reference) AJJ9-S (Mitsubishi Electric Corporation) ASJJ9-S (Mitsubishi Electric Corporation) Type C00HW-JRM (OMRON Corporation) NJ-JPCN- (Fuji Electric Co., Ltd.) NPL-JP (Fuji Electric Co., Ltd.) ON IP.SW PWR L RUN S R L ERR. LERR. S B RATE CC-LINK System : AJBT ASJBT AJQBT ASJQBT STATION NO. PW LRUN R 9 + A B 9 9 x 0 x Light ON with transmission power input, light Off without it ON when normal data is being received ON when data is transmitted ON when data is received ON for transmission error/wrong setting, Blinks when station or transmission speed setting changes during operation S SZ SY SYJ SX a) -wire type Transmission line Master station S B A b) -wire type Master station S B A Twisted pair wire with shielding Twisted pair wire with shielding resistor A A A B B B SL Twisted pair wire with shielding resistor --
5 SX000: Serial Transmission Unit/Plug-in SSX-S - Stations U- IN rail release button C C P = 0. -One-touch fittings Applicable tubing O..: ø n-one-touch fittings Applicable tubing O..: ø, ø IN rail holding screw IN rail M screw B: reen (Rail mounting hole pitch.) Block separation lever (Push type) (Station n) (Station ) Light/Surge voltage suppressor SSX-S - Stations B- IN rail release button C C P = 0. (IN rail dimension) Stations n L L L L stations stations ) Width of applicable to E : Matsushita Electric Works, Ltd. and : Rockwell Automation, Inc. widens to. mm. For -One-touch fittings Applicable tubing O..: ø n-one-touch fittings Applicable tubing O..: ø, ø IN rail holding screw IN rail B: reen -- (Rail mounting hole pitch.) Stations n stations L 0. L 0 L 9. L. Stations n stations L 0. L 0 L 9 L stations stations.. ) Width of applicable to E : Matsushita Electric Works, Ltd. and : Rockwell Automation, Inc. widens to. mm. For
6 Base Mounted Series SX000/000 SX000: Serial Transmission Unit/Plug-in SSX-S - Stations U- C C C P = IN rail release button -One-touch fittings Applicable tubing O..: ø0 n-one-touch fittings Applicable tubing O..: ø, ø, ø IN rail holding screw S SZ SY SYJ SX M screw IN rail B: reen (Rail mounting hole pitch.) (Station n) (Station ) Light/Surge voltage suppressor Block separation lever (Push type) SSX-S - Stations B- C C C P = (IN rail dimension) IN rail release button Stations n L L L L stations stations ) Width of applicable to E : Matsushita Electric Works, Ltd. and : Rockwell Automation, Inc. widens to. mm. For -One-touch fittings Applicable tubing O..: ø n-one-touch fittings Applicable tubing O..: ø, ø, ø IN rail holding screw Stations n stations L. L L L stations B: reen (Rail mounting hole pitch.) IN rail Stations n stations L. L L L. stations ) Width of applicable to E : Matsushita Electric Works, Ltd. and : Rockwell Automation, Inc. widens to. mm. For --
7 --
How to Order Manifold. Option. (1) DIN rail length specified B. (2) (3) Back pressure check valve (4)
Plug-in Unit Series SQ000 [Option] SSQ 0 0 Note) stations Note) The maximum number of stations depends on the type of electrical entries. Manifold mounting D DIN rail mounting style Note) E Direct mounting
More informationHow to Order Manifold. Manifold mounting. DIN rail mounting style Direct mounting style
Plug Lead Unit Series 000 [Option] How to Order Manifold S 0 FD D Electrical entry F kit D-sub connector kit P kit Kit type Flat ribbon cable connector kit J kit Flat ribbon cable (0P) (PC Wiring System
More informationSI unit PRODUCT NAME EX140-SCS1 EX140-SCS2
No.EX##-OMF0012-A SI unit PRODUCT NAME EX140-SCS1 EX140-SCS2 MODEL/ Series Contents 1. Safety P 2 2. Outline P 6 3. Applicable solenoid valves P 6 4. Specifications P 7 5. Descriptions and Functions 5-1.
More informationBase Mounted Plug-in Unit
For details about certified products conforming to international standards, visit us at www.smcworld.com. 000 Plug-in Unit SI unit COM N V V C C C6 M CM 6 B B B6 B M 000 Manifold model Plug-in unit Stations
More information4G B/MN4G B Series Technical data 1) Pneumatics system selection guide
B/MN B Series Technical data ) Pneumatics system selection guide () verage speed of cylinder is found according to combination of series and piping system. Vertically installing a cylinder with rod top,
More informationRemote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
More informationRemote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
More informationonlinecomponents.com
9 Transistor Remote Terminal Blocks Ultra-compact CompoBus/S Transistor Terminal Blocks SRT models support both high-speed communications (75 kbps) and longdistance communications (5 m) systems, switch
More informationCompoNet Gateway Unit for CC-Link
CompoNet Gateway Unit for CC-Link Overview of Gateway Unit...2 CompoNet Settings...2 CompoNet Gateway Unit for CC-Link...3 1 CRT1-series Smart Slave Units 1 Overview of Gateway Unit The CompoNet Gateway
More informationSA (1/4" Steel Shank)
SA (1/4" Steel Shank) Carbide Rotary Files - Cylindrical Shape A - Aluminum Cut d1 d2 l2 l4 Shank Flute Shank 1-11 12-24 25-49 50-100 Metric Length Length 60010 * SA-14.1875 3/16" 4.763 1/4" 5/8" 1-3/8"
More informationSockets. SU Series: DIN Rail Snap-Mount Sockets. F-6 USA: (800) 262-IDEC or (408) , Canada: (888) 317-IDEC ➀➁➄➅ ➁➂➃➄
SU Series: DIN Rail Snap-Mount SU Series: DIN Rail Snap-Mount SUS-L SUS-L -blade DIN-mount/surface mount -blade DIN-mount/surface mount Spring clamp terminals Spring clamp terminals - AWG - AWG 0A A (using
More informationMODEL: R1C-GH. Remote I/O R1X Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
Remote I/O R1X Series THERMOCOUPLE & DC INPUT MODULE (16 points; CC-Link Ver.1.1/Ver.2.) Functions & Features 16-point thermocouple or DC inputs CC-Link interface CC-Link Version 1.1 and 2. can be switched
More informationMODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance
1 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1 guide... P.11~ General precautions... P.19 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance
13 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.139 Sensor selection guide... P.9~ General precautions... P.1 PHOTO PHOTO
More informationAll installation operations can only be carried out by qualified technicians who are suitably trained with respect to the relevant norms and laws.
General instructions 3 1 1.1 General instructions This manual aims at providing information to install the CRS receiving unit of Autec Dynamic series radio remote controls. Instructions regarding the use
More informationCommunication converter COM-J/COM-H COM-JC COM-JL COM-H
converter / CC-LINK H, H G PROFIBUS G Ethernet L L E Protocol E Typical Configuration The controller can be connected to various Open Networks, such as PROFIBUS,, CC-Link, and Ethernet via a gateway. Networks
More informationC200H-NC112 C200HW-NC113 C200H-NC211 C200HW-NC213 C200HW-NC413 CQM1H-PLB21
Terminal Block Simplify Wiring between Motor Controls and Omron s PLC Modules H Relays control signals between a servo driver and the PLC position control module or CQM1H PLC with pulse I/O capability
More information8 Input/8 Output AC Block I/O Module
8 Input/8 Output AC Module Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air flow through the block module.
More informationConnection targets. Universal sensors and switches, universal output devices
AnyWireASLK System Products Guide ASLKTERMAL [ASLK Small Terminal Block Terminal] BL296 B-08F EURO block type The Products Guide describes individual products. Refer to the Guide as necessary. Function
More informationMicro Wizard Instructions
How to install your Fast Track flashing light display timer model K1 with optional remote start switch (If you have ordered the Quick Mount or have a Best Track, disregard this section and refer to the
More informationWASP Extended Shuttle Fitting. Process Overview
Process Overview Tools needed; metric Hex key set Remove Wasp Plate sealer from all power and pneumatic supplies; situate the unit on a clear work area for access. Ensure the Wasp plate sealer has cooled
More informationDP2500 DP0100 DP0250 Differential Pressure Transmitter
PB_DPT_03 2010 DP2500 DP0100 DP0250 Differential Pressure Transmitter The DP Low Differential Pressure Transmitter series is an accurate and cost competitive solution for measuring low pressures of air
More informationDeviceNet Gateway Unit RCM-GW-DV Operation Manual, Second Edition
DeviceNet Gateway Unit RCM-GW-DV Operation Manual, Second Edition Table of Contents 1. Overview... 1 1.1 DeviceNet Gateway Unit... 1 1.2 What Is DeviceNet?... 2 1.3 Application Example of Gateway Unit...
More informationFeatures and Benefits
HAL24 Hall-effect sensor is a temperature stable, stress-resistant, Low Tolerance of Sensitivity micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation
More informationOPERATION MANUAL. SI unit EX120-SDN1 EX121-SDN1 EX122-SDN1 EX124D/U-SDN1
Doc.No. EX## -OME0015 OPERATION MANUAL SI unit EX120-SDN1 EX121-SDN1 EX122-SDN1 EX124D/U-SDN1 SMC Corporation Contents 1.Safety instructions ------------------------------------------------------ P3 2.Specifications
More informationDeviceNet Gateway Unit RCM-GW-DV Operation Manual, Fifth Edition
DeviceNet DeviceNet Gateway Unit RCM-GW-DV Operation Manual, Fifth Edition DeviceNet Note Note on DeviceNet Products Take note that the IAI products listed below cannot be connected to Omron s PLCs via
More information40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES
9 0 mm Beam Pitch General Purpose Area Sensor SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.60
More informationField Network SRT Series
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Field Network SRT Series
More informationConfiguring a Mitsubishi PLC CC-Link Network
Configuring a Mitsubishi PLC CC-Link Network Author: Sam Stewart/Kade Olson Date: May 10, 2017 Introduction AcraDyne Gen IV Controllers are available with CC-Link (Version 1 and 2) communication capability.
More informationElectronic Vacuum Regulator. How to Order ITV S 5. Monitor output
Electronic Vacuum Regulator Series ITV29/29 How to Order [Option] RoHS ITV 29 2 S 5 Pressure range 9.3 to 8 kpa Power supply voltage 24 VDC to 5 VDC Note) Communication models are available only for 24
More informationPARM-SIZED, 16-CHANNEL RELAY TERMINALS
Pressure connector connect type Wire-direct connect type PARM-SIZED, -CHANNEL RELAY TERMINALS FEATURES Compact, space-saving design: The Relay Terminal with I/O channels measures only (W) (D) (H) mm (W).
More informationDP2500 DP0100 DP0250 Differential Pressure Transmitter
PB_DP_03 2011 DP2500 DP0100 DP0250 Differential Pressure Transmitter The DP Low Differential Pressure Transmitter series is an accurate and cost competitive solution for measuring low pressures of air
More information24V dc Analog Block I/O Module
24V dc Analog Module Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air flow through the block module. Refer
More informationAll installation operations can only be carried out by qualified technicians who are suitably trained with respect to the relevant norms and laws.
General instructions. General instructions This manual aims at providing information to install the ARM receiving unit of Autec Dynamic series radio remote controls. Information about transmitting unit's
More informationVBRC 4. Radio Communicator. Installer Manual
VBRC 4 Radio Communicator Installer Manual 17 December 2014 CONTENT 1. INTRODUCTION...3 2. SYSTEM STRUCTURE...3 3. SYSTEM PROGRAMMING WITH PC SOFTWARE...5 4. TROUBLESHOOTING...6 5. FIRMWARE UPGRADE...7
More informationApril 1994 UCM-420A. Setpoint Controller. Operating and Installation Instructions
April TM UCM-A Setpoint Controller Operating and Installation Instructions A LARGE number of applications in a SMALL package... REMOTE SETPOINT CONTROLLER LOCAL SETPOINT CONTROLLER - ma SIGNAL GENERATOR
More informationSeries 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
More informationControl solutions Biofloor
MR24 Central radio controller 24V Connect COMAP offers the Connect control system as part of its underfloor heating and cooling solution. Composed of a central radio control module (MR24), wireless digital
More informationMicro Wizard Instructions K1 KIT ASSEMBLY INSTRUCTIONS With Remote Start Switch
K1 KIT ASSEMBLY INSTRUCTIONS With Remote Start Switch Kit Contents: (If you have ordered the Quick Mount or have a Best Track, the contents of your kit will differ from this list. Please refer to the mounting
More informationZZxD-Nx-xR Series. Wireless Modbus I/O B&B ELECTRONICS PRODUCT INFORMATION
Modular, Customizable Wire Replacement Modbus ASCII /RTU Compatible Wide Operating Temperature Active Repeater Functionality 10 to 48 VDC & 24 VAC Input Power Zlinx Wireless Modbus I/O - flexible enough
More informationJacket heater, etc Mounting bracket for Pipe wrapping. (Optional) Temperature sensor. Output (To heater) (Optional)
Temperature Controller with Built-in SSR SB SB General Description SB is a channel temperature controller with Built-in SSR (Solid state relay) designed for flexible heating solutions such as heat trace
More informationTSB Suffix Suffix. 503Si 2 Suffix
Catalog Numbering Code Europa locks TS 230 02 Suffix Suffix Series Europa locks Options (blank) = Standard (105 ) HT = High Temperature (150 ) US = 600V Pitch 230 = 8mm 500 = 10mm 500SK = 10mm, Elongated
More informationSεW Supply, LLC 800B Parts List - OLD
0 S040300 Thumb Screw 4-Set (Replacement for S-4-3) 1 D010000 Shot & Powder Tube Lids 2 TENG02000 Shot & Powder Plastic Tubes 12" 3 D03000 Shot & Powder Baffles 4 S040000 Shot & Powder Reservoir Plate
More informationCat.No. W240-E1-1 SYSMAC C200H-TV. Heat/Cool Temperature Control Unit OPERATION MANUAL
Cat.No. W240-E1-1 SYSMAC C200H-TV Heat/Cool Temperature Control Unit OPERATION MANUAL TABLE OF CONTENTS SECTION 1 System Configuration and Features................. 1 1-1 Features...............................................................
More informationMODEL: R9CWTU. Remote I/O R9 Series. EXTENSION UNIT 1: With connection
Remote I/O R9 Series MULTI POWER MOITORIG UIT (Clamp-on current sensor CLSE, CC-Link) Functions & Features Multi Power Monitoring Unit for CC-Link. By using clamp-on current sensors, there is no need of
More informationCZ-K Series. RGB Digital Fiberoptic Sensors. Description MAIN MENU PRODUCTS APPLICATIONS INDEX SELECTION GUIDE
RGB Digital Fiberoptic Sensors CZ-K Series Features RGB three-light source Wide detection range of 70 ±20 mm 2.75" ±0.78" High-speed response of 300 µs Water-resistant sensor head IP-67 rated Detecting
More informationCAB2 Schematic drawing CAB3 CAB4 CAB5. CAB6 Schematic drawing CAB7 Schematic drawing CAB8 Schematic drawing 03315
CAB1 Schematic drawing 03305 CAB1 SIEMENS Converter 6ES5 734-1BD20 20mA current loop Siemens 15-pos D-sub Male CAB2 Schematic drawing 03301 CAB2 Allen Bradley MicroLogix 8-pos MiniDIN CAB3 Schematic drawing
More informationPalm-sized, 16-channel Relay Terminals
Palm-sized, -channel Relay Terminals RELAY TERMINAL FEATURES. Possible to select relay for use in the relay terminal in accordance with load. [Mountable relay: PA relay and Power PhotoMOS (voltage sensitive
More informationOWNER S MANUAL LONG BEACH 13 HEX GAZEBO WITH NET. Product code: D71 M34593 UPC code: Vendor Item: SS-K-138-2NGZ13. Date of purchase: / /
OWNER S MANUAL LONG BEACH 3 HEX GAZEBO WITH NET Product code: D7 M34593 UPC code: 79455 7738 Vendor Item: SS-K-38-NGZ3 Date of purchase: / / Special Warning Assemble your gazebo on a soft, non-abrasive
More informationHANDY DRIVE HANDHELD CONTROL SYSTEM TO DRIVE THE
HANDY DRIVE HANDHELD CONTROL SYSTEM TO DRIVE THE CRAWLER TRACKS OF AN HYDRAULIC DRIVEN MACHINE The HandyDrive handheld control system, composed of the handeld remote control and the electronic control
More informationioselect Z-NET Z-4RTD 4 Channel RTD Input Module
4 Channel nput Module : PT00, PT000, PT500 & N00: 2, 3 & 4 wire 500 V solation, 6-way Modbus Communications Adjustable Sampling Time Accuracy to 0.2 C Configuration and Setup Software EC 63 Flexible Power
More informationAGS-XP-250. AGS Sensor Tip FOR THE AGS-SB170 SENSOR DESCRIPTION. dametric. AGS-XP-250_Eng.docx Oct. 7, 2010 / JO / BL Page 1 (6)
AGS-XP-250 AGS Sensor Tip FOR THE AGS-SB170 SENSOR dametric AGS-XP-250_Eng.docx Oct. 7, 2010 / JO / BL Page 1 (6) CONTENT 1 GENERAL... 2 2 SPECIFICATION... 2 3 SEALING... 3 4 TIP EXCHANGE... 3 5 ADJUSTING
More informationAdding Cabinet to the DCT1900 System
Add a cabinet Adding Cabinet to the DCT1900 System Adding a cabinet to an existing system requires planning to assure a successful addition with minimal downtime and problems. Both software and hardware
More information1S servo drive System configuration
R88D-1SN@@@-ECT 1S servo drive Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance
More informationTrendmaster * Dynamic Scanning Module
149744 Trendmaster * Dynamic Scanning Module Product Datasheet Bently Nevada * Asset Condition Monitoring Description The 149744 Trendmaster* Dynamic Scanning Module (DSM) is a compact rack-based data
More informationExcel 10 W7761A Remote Input/Output Device
Excel 0 W776A Remote Input/Output Device INSTALLATION INSTRUCTIONS PRODUCT DESCRIPTION The W776A Remote Input/Output (RIO) Device is a Free Topology Transceiver (FTT) LonMark compliant device in the Excel
More informationMODEL: MRP6. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator Electrical positioner incorporated 1/1000 high resolution Easy adjustment: electronic
More informationHPX-ET Series. Gang-mounted Distributed Remote Cluster Type Fiber Optic Photoelectric Sensors. Specifications. click
6 HPX-ET Series FEATURES Connector Connection Type 16-unit Gang-mounting Sensors Strongly Support the Request for Wiring and Space Savings. Distributed Remote Cluster Arrangement is a New Concept for Designing
More informationWELDING POSITIONER PARTS BREAKDOWN DRAWING GP-200
WELDING POSITIONER PARTS BREAKDOWN 10 DRAWING GP-200 1 GP-200-001 FRAME 1 2 GK-160-012 5/16"-18UNC x 5/8" CARRIAGE BOLT 6 3 GK-136-055 5/16"Ø LOCK WASHER 6 4 GK-109-052 5/16"-18UNC HEX NUT 10 5 GP-200-002
More informationMaintenance Information
47104302 Edition 1 November 2012 Cordless Drill/Driver QX Series Maintenance Information Save These Instructions Tool Diagnosis 1. Before servicing this unit, you will need a fully charged battery of known
More informationAFP Pneumatic Rotary Actuator User s Instructions
AFP Pneumatic Rotary Actuator User s Instructions [REV. 0.2] This actuator has been tested up to 5 million cycles. There are two adjustable stoppers s that ensure that the valve is never overloaded. This
More informationAPX Mobile and Portable Automated Test and Alignment
APX Mobile and Portable Automated Test and Alignment Software Updates First things first! Be sure to check that you are running the latest software versions for the 8800SX and its applications. Visit the
More informationSS-A5 SERIES SH SERIES
395 Manually Sensitivity Set Photoelectric Sensor SS-A5 SERIES SH SERIES Amplifi er-separated General terms and conditions... P.1 Sensor selection guide...p.11~ / P.9~ Related Information SH Specifications
More informationSection K SILVER BOX/UNIVERSAL VOLTAGE SILVER BOX ELECTRICAL
Section K SILVER BOX/UNIVERSAL VOLTAGE SILVER BOX ELECTRICAL December 2009 1K Index No. Part No. Description 1. 68-100051-000 Setting Table Cable Assembly 2. 68-100180-000 Setting Table Motor Cable Assembly
More informationL40. Pneumatic linear slide L40
L40 Pneumatic linear slide High stiffness and deflection resistance. Up to 30kg on the carrier. Guidance with recirculating ball-bearings. Exclusive belt drive system. Hydraulic shock-absorbers on the
More informationPG Interface Card "OPC-E2-PG"
Instruction Manual PG Interface Card "OPC-E2-PG" Thank you for purchasing this PG interface card "OPC-E2-PG." Installing this card to your inverter enables speed control with speed sensor and pulse train
More informationP5201 Universal Programmable Transmitters with Galvanic Isolation
Transmitters - KB0288-2012/09 P5201 Universal Programmable Transmitters with Galvanic Isolation One type of transmitter for all regular resistance and thermocouple sensors. Linearized output signal 4 to
More informationMODEL: M1EXT. with Display M1E Series
2 Channel Super-mini Signal Conditioners with Display M1E Series THERMOCOUPLE TRANSMITTER (2 channels, PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized
More informationCopyright / Trademarks -This manual and its contents are copyrighted. -You may not copy this manual,in whole or part,without written consent of
Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product correctly, read this User s Manual thoroughly before use. Make sure
More information1S servo drive System configuration
R88D-1SN@@@-ECT Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance Direct wiring
More informationHarmony Remote Repair
Harmony Remote Repair harmonyremoterepair.com How to install your new Harmony One Front Cover/Touch Screen Important! Before you begin working on your Harmony One, you must discharge any static electricity
More informationXC series PLC expansion module User Manual
XC series PLC expansion module User Manual WUXI XINJE ELECTRIC CO., LTD. This manual includes some basic precautions which you should follow to keep you safe and protect the products. These precautions
More informationSmartZone Gateway-Enabled M Series Rack PDU (for Aggregate Power Monitoring)
SmartZone Gateway-Enabled M Series Rack PDU SPECIFICATION SHEET specifications Gateway-Enabled M (Monitored) Series Rack Power Distribution Units (PDUs) safely and efficiently manage and distribute power
More informationLong-distance Separate-amplifier Proximity Sensors ES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier ES Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
More informationDYNAMIC SERIES. Part C: FJM transmitting unit INDEX. 1 Description... C Technical data... C Technical data sheet...
Original instructions DYNAMIC SERIES INDEX 1 Description... C - 2 2 Technical data... C - 3 3 Technical data sheet... C - 3 4 Plates... C - 4 5 Light signals... C - 4 6 Malfunction signalled by the transmitting
More informationSmart Fiber Amplifier Units E3NX-FA
NEW Presence Detection Measurement Smart Fiber Amplifier Units E3NX-FA Industry-leading Levels of Performance Highly Stable Detection Easy Setup for Any Workpiece by Any Operator For performance (sensing
More informationRockwell Automation PowerFlex 755 Disassembly
Rockwell Automation PowerFlex 755 Disassembly Disassembling a 1HP Rockwell Automation PowerFlex 755 VFD. Written By: Alex Nolan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION This guide outlines
More informationWritten By: Chad Facciolo
HTC One Mini 2 Charging Port Replacement These instructions will show you how to replace your charging port. Written By: Chad Facciolo ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION The charging
More information40 mm Beam Pitch General Purpose Area Sensor. Failure monitoring
OTHER SUNX PRODUCTS NA0 SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Interference prevention Slim and intelligent Refer to p.9l for the light curtain. Slim body Failure monitoring
More informationModule Type Controller SRV. DeviceNet Communication Instruction Manual IMS01P11-E1 RKC INSTRUMENT INC.
Module Type Controller SRV DeviceNet Communication Instruction Manual RKC INSTRUMENT INC. IMS01P11-E1 DeviceNet is a registered trademark of Open DeviceNet Vender Association, Inc. Modbus is a registered
More information1. Fasten press to bench or work surface using the mounting holes provided (Item 3).
INSTRUCTIONS AND PARTS LIST FOR Models 1-202, 1-204, 1-210, and 1-220 Air Arbor Presses WARNING LABELS To the left is the safety Alert symbol. When you see these safety alert symbols on your press, be
More informationTRAILER MOUNTED PUMP MODEL B20 ILLUSTRATED PART MANUAL
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 PAGE 01 MODEL HP SHOWN: STANDARD HOPPER WITH DUAL SHIFT SWING CYLINDERS REED TRAILER MOUNTED CONCRETE PUMP MODEL ILLUSTRATED MANUAL
More informationMicro Wizard Instructions
How to install FAST TRACK K3 4-digit actual times and 1-digit sequence of finish display timer with Computer Serial Interface Enclosed you will find the Fast Track finish line, AC adapter and remote start
More informationIndustry-leading Levels * of Performance Highly Stable Detection
NEW Presence Detection Measurement Smart Fiber Amplifier Units E3NX-FA Industry-leading Levels of Performance Highly Stable Detection Easy Setup for Any Workpiece by Any Operator For performance (sensing
More informationCFO900 Series. User Manual. Audio/Data/Current Loop Mux/Demux CSX111, CSX123 & CSX222. CFO CSX series user manual, , rev003
CFO900 Series User Manual Audio/Data/Current Loop Mux/Demux CSX, CSX23 & CSX222 CFO CSX series user manual, 59300048, rev003 Contents The CSX Series Multiplexer Introduction... Introduction... Frame installation...2
More informationUser s Manual. Model MS5 Potentiometer Converter (Free Range Type) MODEL AND SUFFIX CODES CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT
User s Manual Model MS5 Potentiometer Converter (Free Range Type) IM 77J04S05-0E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 80-8750 Japan Phone: +8-422-52-779 Facsimile:
More information10.PART LISTS 10.1 ELEVATING ASSEMBLY (Ⅰ) ELEVATING ASSEMBLY DRAWING 10-1
10.PART LISTS 10.1 ELEVATING ASSEMBLY (Ⅰ) 10.1.1 ELEVATING ASSEMBLY DRAWING 10-1 10.1.2 ELEVATING ASSEMBLY (Ⅰ) PART LIST NO. PART NO. DESCRIPTION QTY 1. 5TON 15 PNEUMATIC BOOSTING CYLINDER 1 2. HN-M12
More informationSL300 Snow Depth Sensor USL300 SNOW DEPTH SENSOR. Revision User Manual
USL300 SNOW DEPTH SENSOR Revision 1.1.2 User Manual 1 Table of Contents 1. Introduction... 3 2. Operation... 3 2.1. Electrostatic Transducer... 4 2.2. SL300 Analog Board... 4 2.3. SL300 Digital Circuit
More informationTEPZZ 8 5ZA_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION
(19) TEPZZ 8 ZA_T (11) EP 2 811 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication:.12.14 Bulletin 14/0 (21) Application number: 13170674.9 (1) Int Cl.: G0B 19/042 (06.01) G06F 11/00 (06.01)
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More information800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)
1-,, 3-, 4- Toggle Switches (Bul. 800T only) 800T T2 H2 E E X X a b c d e f g Right Left Right Left Blank C T1 T2 T3 T4 a Finger-Safe Guards Description No guards Guards on terminals b Operator Type Description
More informationEasy operation even for beginners! Optimum settings can be realized with simple operations
SENSORS FOR FX-0-F Digital Fiber Sensor for Leak Detection / Liquid Detection Fibers Only FX-0-F FT-F9 FD-F EX-F0/F60 HD-T M SH- FD-L M-DW * UL 600C- compatible, Passed the UL 99 Environment Test based
More informationES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
More informationIndustry-leading Levels * of Performance Highly Stable Detection
NEW Presence Detection Measurement Smart Fiber Amplifier Units E3NX-FA Industry-leading Levels of Performance Highly Stable Detection Easy Setup for Any Workpiece by Any Operator For performance (sensing
More informationConcept of Serial Communication
Concept of Serial Communication Agenda Serial v.s. Parallel Simplex, Half Duplex, Full Duplex Communication RS-485 Advantage over RS-232 Serial v.s. Parallel Application: How to Measure the temperature
More informationGreater Flexibility in Equipment Design
NEW Presence Detection Measurement Smart Fiber Amplifier Units (2-channel models) Greater Flexibility in Equipment Design Same size as the 1-ch model: 10 mm Actual size 2-channel Amplifier reduces installation
More informationWireless Room Temperature and Humidity Transmitter (Units without Temperature Setpoint or Override) Installation and Operating Instructions
Wireless Temperature and Humidity Overview and Indentification The Wireless Temperature and Humidity measures the room temperature and Relative Humidity and transmits the data at 418MHz or 433MHz RF to
More informationMODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator 1/1 high resolution Easy adjustment: electronic limiter at the valve open & closed
More informationOverview of types. Technical data
echnical data sheet SHA-.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control dampers
More information