200mA Regulator IC Monolithic IC MM3404 Series
|
|
|
- Claribel Waters
- 6 years ago
- Views:
Transcription
1 2mA Regulator IC Monolithic IC MM344 Series 2mA Regulator IC MM344 Series Outline This IC is a high speed response 2mA regulator IC with low quiescent current and high ripple rejection. No load input current is 2µA typ. And ripple rejection is 75dB typ. Dropout voltage is low at 8mV typ., and the output current is 2mA. Therefore the IC applies to most mobile equipment. Features 1. Output current 2mA 2. No load input current 2µA typ. 3. Input current(off).1µa max. 4. Output voltage range.8~5.v 5. Output voltage accuracy ±1%(±2mV, Vo<2V) 6. Dropout voltage 8mV typ. (Io=1mA) 7. Line regulation.2%/v max. 8. Load regulation 4mV max. (Io=.1~1mA) 9. Ripple rejection 75dB typ. (f=1khz) 1. Output capacitor 1µF Package SOT-25A SC-82 PLP-4B Applications 1. Cellular phones 2. Digital still cameras 3. Mobile equipments
2 2mA Regulator IC MM344 Series Block Diagram VDD VOUT CE Bias Vref Current Limit GND Pin Assignment SOT-25A (TOP VIEW) 1 VDD 2 GND 3 CE 4 NC 5 VOUT SC-82 (TOP VIEW) 1 CE 2 GND 3 VOUT 4 VDD 1 2 PLP-4B (TOP VIEW) 1 VOUT 2 GND 3 CE 4 VDD
3 2mA Regulator IC MM344 Series Pin Description SOT-25A SC-82 Pin No. Pin name Functions 1 VDD Voltage supply pin 2 GND Ground pin 3 CE ON/OFF Control pin CE OUTPUT Low OFF High ON Connect CE pin with VDD pin, when it is not used. 4 NC No connection 5 VOUT Output pin PLP-4B Pin No. Pin name Functions 1 VOUT Output pin 2 GND Ground pin Pin No. Pin name Functions 1 CE ON/OFF Control pin CE OUTPUT Low OFF High ON Connect CE pin with VDD pin, when it is not used. 2 GND Ground pin 3 VOUT Output pin 4 VDD Voltage Supply pin 3 CE ON/OFF Control pin CE OUTPUT Low OFF High ON Connect CE pin with VDD pin, when it is not used. 4 VDD Voltage-supply pin Absolute Maximum Ratings (Except where noted otherwise Ta=25 C) Item Symbol Ratings Units Storage temperature TSTG 55~+15 C Supply voltage VDD.3~7. V CE input voltage VCE -.3~VDD+.3 V Output voltage VOUT -.3~VDD+.3 V Output current Io max. 4 ma 35(Note1)(SOT-25A) Power dissipation Pd 33(Note2)(SC-82) 12(Note3)(PLP-4B) mw Note1 : With PC Board of glass epoxy t mm Note2 : With PC Board of glass epoxy t mm Note3 : Single device Recommended Operating Conditions (Except where noted otherwise Ta=25 C) Item Symbol Ratings Units Operating ambient temperature TJOP -4~85 C Operating voltage VOP 1.6~6.5 V Output current IO ~2 ma
4 2mA Regulator IC MM344 Series Electrical Characteristics 1 (Except where noted otherwise VDD=VOUT(typ.)+1V, VCE=VDD, Ta=25 C) Item Symbol Measurement conditions Min. Typ. Max. Units Input current(off) IDDoff VCE=V.1.1 µa No-load input current IDD IOUT=mA 2 5 µa Output voltage VOUT IOUT=1mA 2.V) (VOUT IOUT=1mA 1.95V) (VOUT V V VO(typ.)+.5V VDD 6.5V Line regulation VLINE VOUT 1.1V, IOUT=1mA 1.6V VDD 6.5V.1.2 %/V VOUT 1.5V, IOUT=1mA Load regulation VLOAD.1mA IOUT 1mA 1 4 mv Dropout voltage Vio Please refer to another page V Ripple rejection (Note4) RR f=1khz, Vripple=.5V, IOUT=3mA VOUT.85V f=1khz, Vripple=.5V, IOUT=3mA VOUT=.8V 75 db VOUT Temperature coefficient (Note4) VOUT / T IOUT=3mA -4 C TOP 85 C ±5 ppm/ C Output current limit Ilim 2 25 ma Output short-circuit current Ishort VOUT=V 3 ma CE H threshold voltage VCEH V CE L threshold voltage VCEL.3 V CE H threshold voltage ICEH µa CE L threshold voltage ICEL µa CL Discharge resistance Rdisc 78 Ω Note4 : The item is guaranteed by design.
5 2mA Regulator IC MM344 Series Electrical Characteristics 2 (Except where noted otherwise VDD=VOUT(typ.)+1V, VCE=VDD, Ta=25 C) Item Model No. Output voltage Dropout voltage VOUT (V) Vio (mv) Measurement conditions Min. Typ. Max. Measurement conditions Min. Typ. Max. MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A IOUT=1mA MM344Z VOUT 1.5V (Note5) MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z IOUT=1mA MM344A MM344Z MM344A MM344Z MM344A MM344Z IOUT=1mA MM344A VOUT 1.5V MM344Z VDD=VOUT(typ.)-.2V MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z Note5 : Dropout voltage max. value in the input and it is confirmed that there is no output abnormal voltage impression the load 1mA in the model less than VOUT=1.45V.
6 2mA Regulator IC MM344 Series Item Model No. Output voltage Dropout voltage VOUT (V) Vio (mv) Measurement conditions Min. Typ. Max. Measurement conditions Min. Typ. Max. MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z IOUT=1mA MM344A4 IOUT=1mA VOUT 1.5V 8 14 MM344Z VDD=VOUT(typ.)-.2V MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A MM344Z MM344A Note5 : Dropout voltage Max. value in the input and it is confirmed that there is no output abnormal voltage impression the load 1mA in the model less than VOUT=1.45V.
7 2mA Regulator IC MM344 Series Measuring Circuit GND VOUT COUT V CE VDD A A Cin Application Circuit GND VOUT COUT CE VDD Cin (reference example of external parts) Output capacitor Ceramic capacitor 1.µF Input capacitor Ceramic capacitor 1.µF Temperature Characteristics : B Note 1. The output capacitor is required between output and GND to prevent oscillation. 2. The ESR of capacitor must be defined in ESR stability area. It is possible to use a ceramic capacitor without ESR resistance for output. The ceramic capacitor must be used more than 1.µF and B temperature characteristics. 3. The wire of Vcc and GND is required to print full ground plane for noise and stability. 4. The input capacitor must be connected a distance of less than 1cm from input pin. 5. In case the output voltage is above the input voltage, the overcurrent flow by internal parastic diode from output to input.
8 2mA Regulator IC MM344 Series Characteristics (Vo=.8V) (Except where noted otherwise VDD=VOUT (typ.) +1V, VCE=VDD, Ta=25 C) Output - Input voltage 1.5 Input current - Input voltage 5 RL= Output voltage VO (V) 1..5 RL=8 RL=27 RL=8 Input current IDD (µa) Load regulation Line regulation Load regulation (mv) Line regulation (mv) RL= VOUT temperature coefficient.82 IO=3mA Output voltage VO (V) Ta (ºC)
9 2mA Regulator IC MM344 Series Ripple Rejection ESR stability area Ripple rejection RR (db) mA 5mA 1mA.1 1 3mA Frequency (khz) ESR ( ) Stable area Instable area Current Limit 1.2 Output voltage VO (V)
10 2mA Regulator IC MM344 Series Load transient response (VDD=Vo+1V, VCE=VDD, Cin=Co=1µF) IO:5mA 2µs/div 1mA IO:5mA/div IO:1mA 2µs/div 15mA IO:1mA/div 2mV VO:2mV/div 55mV VO:5mV/div IO:.1mA 2µs/div 5mA IO:5mA/div IO:.1mA 2µs/div 15mA IO:1mA/div 5mV VO:5mV/div 12mV VO:1mV/div Input rise characteristics (VDD=V 1.8V, VCE=VDD, Io=3mA) CE rise characteristics (VDD=1.8V, VCE=V VDD, Io=3mA) 2µs/div VDD:1V/div 2µs/div VCE:1V/div VO:.1V/div VO:.1V/div
11 2mA Regulator IC MM344 Series Characteristics (Vo=3.V) (Except where noted otherwise VDD=VOUT (typ.) +1V, VCE=VDD, Ta=25 C) Output - Input voltage 4 Input current - Input voltage 5 RL= Output voltage VO (V) RL=3k RL=1 RL=3 Input current IDD (µa) Load regulation Line regulation Load regulation (mv) Line regulation (mv) RL= Dropout voltage VOUT temperature coefficient Dropout voltage ViO (mv) VDD=2.8V 15 2 Output voltage VO (V) Ta (ºC) IO=3mA
12 2mA Regulator IC MM344 Series Ripple Rejection ESR stability area Ripple rejection RR (db) mA 5mA 3mA 1mA ESR ( ) Stable area Instable area Frequency (khz) Current Limit Output voltage (V)
13 2mA Regulator IC MM344 Series Load transient response (VDD=Vo+1V, VCE=VDD, Cin=Co=1µF) IO:5mA 2µs/div 1mA IO:5mA/div IO:1mA 2µs/div 15mA IO:1mA/div 22mV VO:2mV/div 55mV VO:5mV/div IO:.1mA 2µs/div 5mA IO:5mA/div IO:.1mA 2µs/div 15mA IO:1mA/div 6mV VO:5mV/div 13mV VO:1mV/div Input rise characteristics (VDD=V 4.V, VCE=VDD, Io=3mA) CE rise characteristics (VDD=4V, VCE=V VDD, Io=3mA) 2µs/div VDD:2V/div 2µs/div VCE:2V/div VO:1V/div VO:1V/div
14 2mA Regulator IC MM344 Series Characteristics (Vo=5.V) (Except where noted otherwise VDD=VOUT (typ.) +1V, VCE=VDD, Ta=25 C) Output - Input voltage 6 Input current - Input voltage 5 RL= Output voltage VO (V) RL=5k RL=167 RL= Input current IDD (µa) Load regulation Line regulation Load regulation (mv) Line regulation (mv) RL= Dropout voltage VOUT temperature coefficient Dropout voltage ViO (mv) VDD=4.8V 15 2 Output voltage VO (V) Ta (ºC) IO=3mA
15 2mA Regulator IC MM344 Series Ripple Rejection ESR stability area Ripple rejection RR (db) mA 1mA 3mA 1mA ESR ( ) Stable area Instable area Frequency (khz) Current Limit 6 Output voltage VO (V)
16 2mA Regulator IC MM344 Series Load transient response (VDD=Vo+1V, VCE=VDD, Cin=Co=1µF) IO:5mA 2µs/div 1mA IO:5mA/div IO:1mA 2µs/div 15mA IO:1mA/div 24mV VO:2mV/div 6mV VO:5mV/div IO:.1mA 2µs/div 5mA IO:5mA/div IO:.1mA 2µs/div 15mA IO:1mA/div 6mV VO:5mV/div 12mV VO:1mV/div Input rise characteristics (VDD=V 6.V, VCE=VDD, Io=3mA) CE rise characteristics (VDD=6.V, VCE=V VDD, Io=3mA) 2µs/div VDD:2V/div 2µs/div VCE:2V/div VO:2V/div VO:2V/div
1000mA Regulator IC Monolithic IC MM342XX
1mA Regulator IC Monolithic IC MM342XX 1mA Regulator IC MM342XX Outline This IC is a series regulator that has been developed to be the best choice for stationary as well as mobile equipment in which power
300mA LDO Monolithic IC MM3571 Series
3mA LDO Monolithic IC MM3571 Series Outline This IC is a 3mA Low dropout regulator IC with a prevention circuit of rush current. No load input current is 25µA typ, and it reduce transient drop in voltage
Low-Saturation voltage 300mA LDO Monolithic IC MM334x Series
Low-Saturation voltage 3mA LDO Monolithic IC MM334x Series Low-Saturation voltage 3mA LDO MM334x Series Outline This IC is a 3mA LDO with an ultra-low saturation voltage. This device features a 3 ma current
IC for 150mA Regulator Monolithic IC MM314 N, 314 R
MITSUMI IC for 15mA Regulator MM314 N, 314 R IC for 15mA Regulator Monolithic IC MM314 N, 314 R Outline This IC is an ultra-small, low noise CMOS regulator IC that supports ceramic capacitors (low ESR).
500mA LDO with soft-start Monolithic IC MM3478 Series
5mA LDO with soft-start Monolithic IC MM3478 Series 5mA LDO with soft-start MM3478 Series Outline This IC is a 5mA LDO with soft-start. The soft-start can reduce a rush current by the Cs capacitor on start-up.
200mA LDO Monolithic IC MM1836 Series
2mA LDO Monolithic IC MM1836 Series Outline This IC is a 2mA Low dropout regulator IC with ON/OFF control. The IC applies to a standard home equipments, for a maximum operating voltage is 14V. Package
CMOS Regulator Monolithic IC MM303X Series
CMOS Regulator Monolithic IC MM33X Series CMOS Regulator MM33X Series Outline This IC is a voltage regulator IC developed using the CMOS process. Super low consumption current of µa typ. (MM33X) (when
Low-Saturation voltage 1.5A LDO Monolithic IC MM185x Series
Low-Saturation voltage.5a LDO Monolithic IC MM85x Series Outline This IC is a.5a LDO with a low saturation voltage. In addition to a low-saturation voltage (.6V typ., IO=.5 A), the device has a low voltage
150mA Regulator Monolithic IC MM157 N, 161 N
MITSUMI 5mA Regulator MM57, 6 5mA Regulator Monolithic IC MM57, 6 Outline This IC is an ultra-small, low noise, stable power supply that supports ceramic capacitors (low ESR) Output current goes up to
CMOS Regulator Monolithic IC MM327
MITSUMI CMOS Regulator MM327 Series CMOS Regulator Monolithic IC MM327 Series Outline This IC is a regulator IC that provides ultra-low current consumption (0.8µ), and low input voltage (1.2V~6V), and
ELM86xxxxBxA CMOS Dual 400mA LDO Regulator
ELM86xxxxBxA CMOS Dual ma LDO Regulator General description ELM86xxxxBxA is dual CMOS Voltage Regulator which consists of large current LDOs. With the chip enable function of each channel, it is possible
APPLICATIONS Mobile phones Cordless phones Cameras, video recorders Portable games Portable AV equipment Reference voltage Battery powered equipment
CMOS Low Power Consumption Dropout Voltage : 60mV @ 30mA 200mV @ 100mA Maximum Output Current : 150mA (300mA=XC6204 E to H Type) Highly Accurate : ±2% Output Voltage Range : 1.8V ~ 6.0V (XC6204) 0.9V ~
R1182x SERIES. Low Voltage 150mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS NO.EA
R8x SERIES Low Voltage 5mA LDO REGULATOR NO.EA--7 OUTLINE The R8x Series are CMOS-based positive voltage regulator ICs with high output voltage accuracy and low supply current. Each of these ICs consists
VRR Series. AnaSem. High speed, Low dropout, ±1% High output accuracy CMOS Voltage Regulator with On/Off circuit. Analog Semiconductor IC. AnaSem Inc.
AnaSem Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy CMOS Voltage Regulator with On/Off circuit Rev. E9- Rev. E9- AnaSem Products Data Sheet Analog Semiconductor IC High speed,
GPS,DSC,MP4,PDA,DVD Camera Notebook Data communication GND COUT. SOT23-5L ACP1217A ACP1217B Name Descriptions. 1 3 VIN Input voltage.
GENERAL DESCRIPTION The series are positive voltage regulator fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output voltage,
NJM2871/A, NJM2872/A LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM2871/A, NJM2872/A are low dropout voltage regulators designed for cellular phone application. Advanced Bipolar technology achieves low noise, high
A6304A. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard
XC6210 Series APPLICATIONS. TYPICAL PERFORMANCE CHARACTERISTICS Dropout Voltage vs. Output Current TYPICAL APPLICATION CIRCUIT
ETR0317_004 High Current, High Speed LDO Regulators GENERAL DESCRIPTION The XC6210 series are precise, low noise, high current, positive voltage low dropout regulators. They are fabricated using Torex
VRH Series. AnaSem. High speed, Low dropout, ±1% High output accuracy CMOS Voltage Regulator with On/Off circuit. Analog Semiconductor IC.
安纳森 Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy CMOS Voltage Regulator with On/Off circuit (IMPORTANT: Please check the last page for Genuine Product Labeling) Rev. E- Website:
Limited. R5324x SERIES. Limited TRIPLE LDO OUTLINE FEATURES APPLICATIONS NO. EA
TRIPLE LDO R5324x SERIES NO. EA-99-1244 OUTLINE The R5324x Series are CMOS-based multi positive voltage regulator ICs with high output voltage accuracy, low supply current, low noise, low dropout and high
APPLICATIONS. FEATURES Maximum Output Current : 200mA (300mA Limit, TYP.)
Low Power Consumption:.8µA (TYP.) Range :.V ~.V Range :.9V ~.V Maximum Output Current: ma (ma Limit, TYP.) @ VOUT=.V, VIN=.V Current Limiter Circuit Built-In Ceramic Capacitor Compatible Small Packages
VRD Series. AnaSem. High speed, Low dropout, ±1% High output accuracy CMOS Voltage Regulator with Dual output. Analog Semiconductor IC.
安纳森 Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy CMOS Voltage Regulator with Dual output (IMPORTANT: Please check the last page for Genuine Product Labeling) Rev. E- Website:
High Speed LDO Regulators Low ESR Cap.Compatible,Output ON/OFFControl
ETR0306_005 High Speed LDO Regulators Low ESR Cap.Compatible,Output ON/OFFControl GENERAL DESCRIPTION The XC6209/XC6212 series are highly precise, low noise, positive voltage LDO regulators manufactured
ACP1216. Low Dropout Positive Voltage Regulator GENERAL DESCRIPTION FEATURES APPLICATION CIRCUIT APPLICATION PIN CONFIGURATION ACP1216
GENERAL DESCRIPTION The series are positive voltage regulator ICs fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output
NJM2871/A, NJM2872/A LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM2871/A, NJM2872/A are low dropout voltage regulators designed for cellular phone application. Advanced Bipolar technology achieves low noise, high
RP103x SERIES. LOW NOISE 150mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS NO.EA
RPx SERIES LOW NOISE 5mA LDO REGULATOR OUTLINE NO.EA-9- The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high
Low Power / Fast Mode Alternative 200mA LDO Regulator
RPx SERIES Low Power / Fast Mode Alternative ma LDO Regulator OUTLINE NO.EA-79-77 The RPx is voltage regulator IC with high output voltage accuracy, low dropout voltage and low supply current. This IC
RP114x SERIES. 300mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS NO. EA
SERIES 3mA LDO REGULATOR NO. EA-36-63 OUTLINE The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection. Each of
Low Power/Fast MODE alternative 200mA LDO REGULATOR
RPx SERIES Low Power/Fast MODE alternative ma LDO REGULATOR OUTLINE NO.EA-79- The RPx Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy, low dropout voltage and low supply
R1501x SERIES. 1A LDO REGULATOR (Operating Voltage up to 24V) OUTLINE FEATURES APPLICATIONS NO.EA
R5x SERIES A LDO REGULATOR (Operating Voltage up to 24V) NO.EA-84-89 OUTLINE The R5x series are CMOS-based positive voltage regulator (VR) ICs. The R5xxxxB has features of high input voltage operating,
0.6% ACCURACY LOW NOISE 200mA LDO REGULATOR
RPx SERIES.% ACCURACY LOW NOISE ma LDO REGULATOR OUTLINE NO.EA-- The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance,
PT7M8205 LDO Regulator
Features Output Current: 300mA or more Dropout Voltage: 270mV @ 300mA for 3.3V Operating Voltage Range: 1.8 to 5.5V Output Voltage Range: 1.2 to 3.3V (100mV Step) Low Power Consumption: 65µA High Ripple
A6303A CMOS LOW DROPOUT REGULATOR (LDO) 300mA ULTRA-LOW NOISE, ULTRA-FAST RESPONSE
DESCRIPTION The is designed for portable RF and wireless applications with demanding performance and space requirements. The performance is optimized for battery powered systems to deliver ultra low noise
High Ripple-Rejection Low Dropout CMOS Voltage Regulator
High Ripple-Rejection Low Dropout CMOS Voltage Regulator General Description The Series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption
LDO with Reverse Current Protection / Soft Start / Discharge Function NJM12884DL3. Reverse Current Protection. Thermal. Protection.
NJM88 LDO with Reverse Current Protection / Soft Start / Discharge Function GENERAL DESCRIPTION The NJM88 is a low dropout regulator which achieves high ripple rejection, low noise and high speed response
Very Low Output Voltage Series Regulator
Very Low Output Voltage Series Regulator GENERAL DESCRIPTION The NJM2847 is a series voltage regulator that delivers up to 15mA output current with the output voltage of.8 to 1.4V with ON/OFF control.
RP114x SERIES. 300mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS NO. EA
SERIES 3mA LDO REGULATOR OUTLINE The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection. Each of these voltage
DROPOUT VOLTAGE REGULATOR
ch LOW DROPOUT VOLTAGE REGULATOR! GENERAL DESCRIPTION! PACKAGE OUTLINE The is a ch low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection
High Voltage Ultra low current consumption Io=100mA LDO. I O (min.)=100ma V O 1.0% DFN6-H1(ESON6-H1), SOT-23-5, SOT-89-3
High Voltage Ultra low current consumption Io=1mA LDO GENERAL DESCRIPTION The NJW4182 is a 1mA output Low dropout regulator with high maximum input voltage, ultra-low current consumption and small package.
200mA Low Power Consumption CMOS LDO Regulator CLZ6821/22
General Description The CLZ6821 is a positive LDO regulator designed on patent pending CMOS circuit technologies. The device attains high ripple rejection ratio and superior line and load transient response
LDO with Reverse Current Protection / Soft Start / Discharge Function. Exposed PAD on backside connected to GND. Reverse Current Protection
LDO with Reverse Current Protection / Soft Start / Discharge Function GENERAL DESCRIPTION The NJM877 is a low dropout regulator which achieves high ripple rejection, low noise and high speed response with
LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM888 is a low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent
NJM2830 LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The is a 3mA output low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent
PT7M mA, High PSRR, LDO Regulator Description. Features. Applications. Pin Assignment. Pin Description Pin No I/O Pin Name Description 1 I VIN
Features Input Voltage Range:.7V to 5.5V 3mA Guaranteed Output Current Stable with.47f Ceramic Output Capacitors Low Dropout Voltage 5mV@5mA (Vout=2.8V) Low Quiescent Current 36A High PSRR 75dB@kHz Auto
PT7M8206 LDO Regulator
Features Output Current: 300mA or more Dropout Voltage: 270mV @ 300mA for 3.3V Operating Voltage Range: 1.8 to 5.5V Output Voltage Range: 1.2 to 3.3V (100mV Step) Low Power Consumption: 65µA Standby Current:
Low Dropout Voltage Regulator
Low Dropout Voltage Regulator GENERAL DESCRIPTION The is a ma output low dropout voltage regulator with ON/OFF control. Advanced bipolar technology achieves low noise, high ripple rejection, high accuracy
NJU7272. Low Dropout Voltage Regulator with Reset
Low Dropout Voltage Regulator with Reset GENERAL DISCRIPTION The NJU7272 is a low drop out voltage regulator with input-monitor reset function with delay. Advanced CMOS technology achieves ultra low current
NJM2887 ADJUSTABLE LOW DROPOUT VOLTAGE REGULATOR
ADJUSTABLE LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM887 is an adjustable low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection
XC6214 Series. FEATURES Maximum Output Current APPLICATIONS. TYPICAL PERFORMANCE CHARACTERISTICS Dropout Voltage vs. Output Current XC6214P332
XC6 Series ETR8_ ma Output Current, High Speed LDO Regulators, Thermal Shutdown Function, Ceramic Capacitor Compatible GENERAL DESCRIPTION The XC6 series are highly precise, low noise, high current, positive
300mA/150mA High Speed LDO Regulators with ON-OFF Control
ETR03004-010 300mA/150mA High Speed LDO Regulators with ON-OFF Control GENERAL DESCRIPTION The XC6204/XC6205 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS
0.6% ACCURACY LOW NOISE 300mA LDO REGULATOR
RPx SERIES.6% ACCURACY LOW NOISE ma LDO REGULATOR OUTLINE NO.EA-67-65 The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance,
LOW DROPOUT CMOS VOLTAGE REGULATOR S-818 Series
Rev.1.2 LOW DROPOUT CMOS VOLTAGE REGULATOR The is a positive voltage regulator developed utilizing CMOS technology featured by low dropout voltage, high output voltage accuracy and low current consumption.
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic TCR5SB15 ~ TCR5SB ma CMOS Low-Dropout Regulators (Point Regulators)
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic TCR5SB15 ~ TCR5SB5 ma CMOS Low-Dropout Regulators (Point Regulators) The TCR5SB15 to TCR5SB5 are CMOS general-purpose single-output voltage regulators
LDO with Reverse Current Protection / Soft Start / Discharge Function. Exposed PAD on backside connected to GND. Reverse Current Protection.
LDO with Reverse Current Protection / Soft Start / Discharge Function GENERAL DESCRIPTION The NJM888 is a low dropout regulator which achieves high ripple rejection, low noise and high speed response with
300mA Low Dropout Programmable output CMOS Voltage Regulators. Designator Symbol Description Designator Symbol Description CE Pin Logic :
300mA Low Dropout Programmable output CMOS Voltage Regulators General Description The series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5S15U~TAR5S50U
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSU~TARSU Point Regulators (Low-Dropout Regulator) TARSU~TARSU The TARSxxU Series is comprised of general-purpose bipolar single-power-supply
*1. Attention should be paid to the power dissipation of the package when the load is large.
Rev.3._ HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR Features The S-L298 series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic TCR5SB15~TCR5SB ma CMOS Low-Dropout Regulators (Point Regulators)
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic TCR5SB15~TCR5SB5 2 ma CMOS Low-Dropout Regulators (Point Regulators) TCR5SB15~TCR5SB5 The TCR5SB15 to TCR5SB5 are CMOS general-purpose single-output
NJM2842U2. Very Low Output Low Dropout Regulator FEATURES PIN COFIGURATION
Very Low Output Low Dropout Regulator GENERAL DESCRIPTION The NJM2842 is a very low output voltage, low drop out regulators. It delivers up to A output current with the output voltage from.8v to.8v. The
High Speed Low Dropout Middle Current Voltage Regulators. Designator Symbol Description Designator Symbol Description CE Pin Logic :
High Speed Low Dropout Middle Current Voltage Regulators General Description The series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves
I/O Name Descriptions
Features Output Current: 300mA or more Dropout Voltage: 270mV @ 300mA for 3.3V Operating Voltage Range: 1.8V to 5.5V Output Voltage Range: 1.2V to 3.3V (100mV Step) Low Power Consumption: 65 A Standby
NJW4187. High Voltage Io=1000mA Low Dropout Regulator. FEATURES Wide Operating Voltage Range PRODUCT CLASSIFICATION
High Voltage Io=mA Low Dropout Regulator GENERAL DESCRIPTION The NJW487 is a high voltage and low current consumption low dropout regulator. It has two lineups as A version (built-in ON/OFF function type)
NJM2860 LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The is a low dropout voltage regulator. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current. It features small
ZSAT600 6 VOLT ENHANCED POSITIVE LOCAL VOLTAGE REGULATOR ISSUE 1 - AUGUST 1996 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM. Vin.
6 VOLT ENHANCED POSITIVE LOCAL VOLTAGE REGULATOR ISSUE 1 - AUGUST 1996 DEVICE DESCRIPTION The ZSAT6 is an enhanced three terminal fixed positive 6 volt regulator. The device is designed particularly for
NJM2856 LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM2856 is a low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection. It delivers
LOW DROPOUT VOLTAGE REGULATOR
NJM83 LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM83 is a 3mA output low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection
3-MODE 150mA LDO REGULATOR with the Reverse Current Protection
Rx SERIES -MODE ma LDO REGULATOR with the Reverse Current Protection OUTLINE NO.EA-8- The Rx Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy and low supply current.
RP103x SERIES. LOW NOISE 150mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS. RP103Qxx2 (SC-88A) is the discontinued product. As of April in 2016
RPQxx (SC-88A) is the discontinued product. As of April in 6 RPx SERIES LOW NOISE 5mA LDO REGULATOR OUTLINE NO.EA-9-66 The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy,
LOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The is a low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current.
BM9164 1A BiCMOS LDO
GENERAL DESCRIPTION The family of a linear voltage linear regulators developed utilizing BM unique BiCMOS technology featured low quiescent current (90uA), low dropout voltage, high output voltage accuracy.
NJM2857 LOW DROPOUT VOLTAGE REGULATOR
NJM87 LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM87 is a low dropout voltage regulator. This product has Reverse Current Protection without external SBD Advanced Bipolar technology achieves
NJU7771/72/73/74/75/76
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION is a low dropout voltage regulator designed for portable items. Advanced CMOS technology achieves high ripple rejection and low quiescent current. NJU7774/75/76
150mA VOLTAGE REGULATOR (Wide Input Voltage Range)
R151x SERIES 15mA VOLTAGE REGULATOR (Wide Input Voltage Range) OUTLINE NO.EA-15-78 The R151x series are CMOS-based positive voltage regulator (VR) ICs featuring 15mA output current. The R151xxxxB has features
XC6201 Series GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL PERFORMANCE CHARACTERISTICS TYPICAL APPLICATION CIRCUIT. Positive Voltage Regulators
ETR0301_004 Positive Voltage Regulators GENERAL DESCRIPTION The XC6201 series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies.
NJM2805. Low Dropout Voltage Regulator with Reset V OUT V IN V OR GND
NJM285 Low Dropout Voltage Regulator with Reset GENERAL DISCRIPTION The NJM285 is a low dropout voltage regulator with reset function. It provides up to 3mA of logic supply, and the reset function monitors
NJW4186. High Voltage Io=500mA Adjustable Low Dropout Regulator. FEATURES Operating Voltage Range
High Voltage Io=5mA Adjustable Low Dropout Regulator GENERAL DESCRIPTION The NJW4186 is a high voltage and low current consumption low dropout regulator. NJW4186 is an adjustable output voltage type, so
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.3_ HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR S-1131 Series The S-1131 Series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy,
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.3.2_ HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR S-12 Series The S-12 Series is a positive voltage regulator with a low dropout voltage, high output voltage
NJM2835 LOW DROPOUT VOLTAGE REGULATOR V OUT V IN GND
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM285 is a 5mA output low dropout voltage regulator. Advanced Bipolar technology achieves low noise, high ripple rejection and high supply voltage.
PIN CONFIGURATION *The dissipation pad for the USP-6B package should be solder-plated in recommended mount pattern and metal masking so as to enhance
ETR0305_004a GENERAL DESCRIPTION The XC6206 series are highly precise, low power consumption, 3 terminal, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series
NJM2828. Negative Output Low Drop Out voltage regulator
Negative Output Low Drop Out voltage regulator GENERAL DESCRIPTION The NJM88 is a negative output low dropout regulator. Advanced bipolar technology achieves low noise, high precision voltage and high
id9309 Ultra-Low Noise Ultra-Fast 300mA LDO Regulator Features
Ultra-Low Noise Ultra-Fast 300mA LDO Regulator General Description The id9309 is a 300mA, low dropout and low noise linear regulator with high ripple rejection ratio and fast turn-on time. It has fixed
FEATURES APPLICATIONS TYPICAL APPLICATION ORDERING INFORMATION BL9161 XX X X XXX. 300mA Ultra-low Noise, Ultra-Fast CMOS LDO Regulator
FEATURES Ultra-low Noise Ultra-Fast Response in Line/Load Transient 0.01A Standby Current When Shutdown Low Dropout: 230mV@300mA Wide Operating Voltage Ranges: 2.2V to 5.5V Low Temperature Coefficient
*1. Attention should be paid to the power dissipation of the package when the load is large. *2. Refer to Product Name Structure for details.
www.sii-ic.com HIGH RIPPLE-REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Seiko Instruments Inc., 21-21 Rev.5._ The S-L298 series is a positive voltage regulator with a low dropout voltage, high output
TS mA Low Noise LDO Voltage Regulator with Enable
TS5205 150mA Low Noise LDO Voltage Regulator with Enable Pin assignment 1. Input 2. Ground 3. Enable 4. Bypass / Adjust 5. Output Low Power Consumption Low DropOut Voltage 0.275V Fixed and Adjustable Output
APPLICATIONS Mobile Phones Cordless phones and radio communication equipment Portable games Cameras, Video recorders Portable Audio Equipment PDAs
Low Power Consumption : μa (TYP.) Dropout Voltage : mv @ ma : mv @ma Range :.8V to.v Output Current : More than ma (ma limit) Low Output Noise High Ripple Rejection Rate Low ESR capacitor compatible GENERAL
GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL PERFORMANCE CHARACTERISTICS TYPICAL APPLICATION CIRCUIT 1/17
ETR0305_002 GENERAL DESCRIPTION The XC6206 series are highly precise, low power consumption, high voltage, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series
SOT-23-5, 5-Pin SON(A) *1. Attention should be paid to the power dissipation of the package when the output current is large.
Rev.2.2_ HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR The is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption developed based
XC6234 Series APPLICATIONS TYPICAL APPLICATION CIRCUIT TYPICAL PERFORMANCE CHARACTERISTICS. 200mA High Speed LDO Regulator with ON/OFF Switch 1/23
ETR367-2 ma High Speed LDO Regulator with ON/OFF Switch GENERAL DESCRIPTION The series is a ma high speed LDO regulator that features high accurate, high ripple rejection and low dropout. The series consists
NJW4185. High Voltage Io=500mA Low Dropout Regulator. FEATURES Wide Operating Voltage Range PRODUCT CLASSIFICATION
High Voltage Io=mA Low Dropout Regulator GENERAL DESCRIPTION The NJW8 is a high voltage and low current consumption low dropout regulator. It has two product type: A version (built-in ON/OFF function type)
NJM78M00S 3-TERMINAL POSITIVE VOLTAGE REGULATOR
-TERMINAL POSITIVE VOLTAGE REGULATOR NJM78MS GENERAL DESCRIPTION The NJM78MS is a.5a output -Terminal Positive Voltage Regulator. It has improvements in contrast with a conventional NJM78M: An output voltage
XC6401 Series FEATURES. TYPICAL PERFORMANCE CHARACTERISTICS Interactive Load Transient Response TYPICAL APPLICATION CIRCUITS
XC Series ETR9_ Dual LDO Regulators, Low ESR Cap. Compatible GENERAL DESCRIPTION The XC series are highly accurate, Dual, low noise, CMOS LDO voltage regulators. Performance features of the series includes
id id mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator Features General Description Applications
500mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator General Description The is a 500mA, low dropout and low noise linear regulator with high ripple rejection ratio. It has fixed
LOW NOISE 150mA L.D.O REGULATOR
LOW NOISE ma L.D.O REGULATOR RN SERIES APPLICATION MANUAL ELECTRONIC DEVICES DIVISION NO. EA-46-983 NOTICE. The products and the product specifications described in this application manual are subject
RP103x SERIES. LOW NOISE 150mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS NO.EA
RPx SERIES LOW NOISE 5mA LDO REGULATOR OUTLINE NO.EA-9-8 The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high
NJM Adjustable Low Dropout Regulator w/reverse Current Protection
NJM Adjustable Low Dropout Regulator w/reverse Current Protection GENERAL DESCRIPTION The NJM is a ma output low dropout adjustable type voltage regulator. The available setting voltage range is very wide
150mA, Micropower, Low Dropout Linear Regulator UM3730DA-xx DFN UM3730P-xx SOT353
150mA, Micropower, Low Dropout Linear Regulator UM3730DA-xx DFN4 1.0 1.0 UM3730P-xx SOT353 General Description The UM3730 series are low dropout linear regulators designed for low power portable applications.
PT7M8205 LDO Regulator
PT7M8205 Features Output Current: 300mA or more Dropout Voltage: 270mV @ 300mA for 3.3V Operating Voltage Range: 1.8 to 5.5V Output Voltage Range: 1.2 to 3.3V (100mV Step) Low Power Consumption: 65A High
CM mA LDO WITH ON/OFF
GENERAL DESCRIPTION The CM2838 family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (25µ A typ.), low dropout voltage, and high output voltage
R1190x SERIES. 1A REGULATOR (Operating Voltage up to 16V) OUTLINE FEATURES APPLICATIONS. Rev Built-in functions. Others. No.
R9x SERIES A REGULATOR (Operating Voltage up to V) No.EA-83-92 OUTLINE The R9x series are a low supply current voltage regulator with high output voltage accuracy. The maximum operating voltage is V. Each