Lightrak... KNX lighting control system LIGHTRAK / SYSTEM GUIDE INCLUDING BUSCOM POWERED BY SPECIALISTS

Transcription

1 Lightrak... KNX lighting control system LIGHTRAK / SYSTEM GUIDE INCLUDING BUSCOM POWERED BY SPECIALISTS

2 Electrak... the specialist in power distribution throughout the workplace Electrak, part of the Legrand Group in the UK, is a leading manufacturer of power distribution and lighting control solutions. Its power track, floor boxes and grommets, desk modules and lighting control ranges are installed in high specification offices around the world.

3 Legrand is the global specialist in electrical and digital building infrastructures. Innovation is the driving force behind its development. With an increasing investment in research and development (circa 5% of sales) and more than 4,000 active patents, the Legrand Group is focused on maintaining a high rate of new product launches that present innovative solutions to the market. SUSTAINABLE DEVELOPMENT From design through to manufacturing, the Legrand Group selects materials and processes that respect people and the environment. Efficient and environmentally aware product design Product functions that help to avoid energy waste Management of manufacturing and logistics sites Integration of environmental concerns and ISO procedures at the Group s global sites.* * 84% of sites are ISO 14001:2004 accredited including all UK sites. CONTENTS Buscom trunking 4 Lightrak system - features 6 Adapting to changing buildings 8 Integration with KNX and DALI 10 Lightrak sensors 12 System support service 14 Case studies 15 ORDERING INFORMATION System components, lighting control units, sub-cabling 16 Standard switching devices 17 Sub-bus addressable devices 18 Buscom trunking TECHNICAL INFORMATION Lightrak Buscom trunking LEGRAND IN THE UK - POWERED BY SPECIALISTS In the UK Legrand has developed a customer focused structure which harnesses the power of its market leading specialist brands to deliver innovative, integrated solutions for every phase of construction.

4 Buscom trunking... a unique power and data backbone Buscom is at the heart of Electrak s lighting control solutions... distributing both power and communications within a single busbar trunking system, it provides a flexible and simple alternative to traditional wiring installations. THE HEART OF YOUR LIGHTING CONTROL SYSTEM Installing a matrix of Buscom trunking in the ceiling void creates an accessible power and communications backbone throughout a building. The backbone can be tapped into at any point to facilitate instant connection to power and control circuits. Buscom incorporates a shielded twisted pair communications bus inside each length and tap-off, and is suitable for use with any lighting control protocol, including: KNX, LonWorks and DALI. MODULAR. FLEXIBLE. SIMPLE. Trunking lengths simply push fit together, saving time and money on installation. With cable terminations only required for power and control circuits in the feed unit, Buscom delivers a plug and play solution that allows for future lighting layout changes to be made quickly and efficiently, whilst drastically reducing the potential points of failure in comparison with traditional wiring methods. 04 Power and communications within a single trunking system Suitable for use with any lighting control protocol, including: KNX, LonWorks and DALI Modular, flexible system which is quick and simple to install and adapt Reduced potential points of failure in comparison with traditional wiring installations

5 Buscom adds a new dimension to lighting busbar that extends the unquestionable plug and play advantages from the power circuit to the control circuit. This unique system for distributing lighting control signals delivers unrivalled flexibility, regardless of the location of the intelligence... INTELLIGENCE IN THE PANEL INTELLIGENCE IN THE BUSBAR INTELLIGENCE IN THE LCU Lighting control modules located in a central cabinet are connected to the Buscom system via communication circuits that terminate in the feed unit. Control signals are then distributed along the trunking run and made available at any tap-off outlet. Integrating lighting control technology into the Buscom feed unit is particularly effective for DALI control. Each trunking run converts to an individual DALI network into which luminaires can tap-in at any point. Lighting control units (LCUs) are mounted onto and plugged into Buscom trunking, providing a hub into which multiples of luminaires and switching devices are plugged. Buscom s integrated communication bus provides the backbone which networks all control devices together. 05 ENERGY SAVING As with all Electrak solutions, Buscom is a modular system designed to be quick and simple to install, reducing man hours and energy usage on site. energy saving

6 Lightrak... fully addressable lighting control Designed to work in harmony with Electrak s Buscom trunking, Lightrak s lighting control system offers high end sophistication with unbeatable flexibility and speed of installation. PRESENCE OR ABSENCE DETECTION Saves energy and ensures that lighting is only on when needed TIMED EVENT CONTROLLER Programmable touch screen units optimise energy saving SCENE SETTING SWITCH Multiple lighting scenarios are memorised and retrieved at the touch of a button EMERGENCY TEST Traditional key switch to enable testing of self-contained emergency luminaires MULTI-GANG SWITCHES 1, 2, 4 and 8 gang options connect via CAT. 5 cable and RJ 45 plugs 06 SNAP ON... PLUG IN Lightrak lighting control units (LCUs) simply snap on and plug into Electrak s Buscom trunking and are easily unplugged, moved and reprogrammed to accommodate future lighting layout changes.

7 SOPHISTICATED TECHNOLOGY Analogue and DSI dimming through to full DALI control in addressable mode. Networked over a KNX backbone that can be integrated onto IP or BMS systems. FULLY ADDRESSABLE A full KNX network can support in excess of 64,000 KNX devices. Each output of every lighting control unit (LCU) is individually controllable. Lightrak offers full building-wide control for even the largest of projects. DALI EMERGENCY FEEDBACK Two way DALI communication facilitates feedback from DALI emergency inverters onto the KNX bus. Monitoring and reporting software can be easily integrated with KNX. WIDE RANGING CONTROL A comprehensive range of control devices is available: PIR / ultrasonic sensors - wireless reconfiguration of sensor parameters - scene setting - remote control - time scheduling - traditional switching and emergency key switch. DAYLIGHT LINKING Lighting levels are adjusted in relation to the natural daylight contribution. Sensors initiate dimming, saving energy and delivering a constant luminance at the desk. ABSENCE DETECTION Optimise energy savings in cellular offices and meeting rooms. The occupant chooses when the lights are on; the system ensures they are switched off when the space is vacated. 07 Fast, easy installation. Snap on / plug in Fully addressable and PC reconfigurable Analogue, DSI and DALI control Comprehensive range of energy saving switching, sensing and scheduling devices available Seamless connectivity with KNX devices from close to 300 manufacturers Interface with other building control systems via the open KNX protocol Two way communication with DALI, facilitating control and feedback Traditional emergency lighting test functions Comprehensive design and commissioning service

8 The ability to adapt with the 08 At the Category A stage of an office fit-out the lighting requirements of the final tenant are not known. With Lightrak, developers are able to install a cost-effective lighting control solution that is adequate for the client attraction phase, but can be upgraded to meet the needs of the incoming tenant with a minimum level of investment in time and labour.

9 building throughout its life 09 With a matrix of Buscom trunking installed, a Lightrak installation provides a future proof solution where lighting schemes can be completely reconfigured without the need to run or terminate any additional cables. Lighting control units are simply unplugged, moved and reprogrammed; additional devices and control units can also be added to extend the capability of any installation.

10 Lightrak... seamless integration with your technology of choice The Lightrak system operates over a KNX backbone. This enables all control devices connected to the system to communicate with each other, and facilitates seamless interoperability with any KNX certified product. KNX PROTOCOL SYSTEMS KNX is the worldwide standard for all applications in home and building control, ranging from lighting and shutter control to security, HVAC, metering and energy management. With close to 300 members and approximately 7000 certified product ranges, the KNX Association holds partnership agreements with over 30,000 installer companies in over 100 countries. All products bearing the KNX logo are certified in order to guarantee system compatibility, interworking and interoperability and are commissioned via a single, manufacturer independent design and commissioning tool. LEFT: KNX was used as the underlying technology at Terminal 5, Heathrow... possibly the largest lighting control installation in Europe 10 ENERGY SAVING Lighting accounts for up to 40% of a commercial building s electricity use. (Lighting Industry Federation) Lighting controls can provide energy savings of 30% to 55%. KNX IS APPROVED AS: European Standard (CENELEC EN and CEN EN ) International Standard (ISO/IEC ) energy saving For more information about KNX, visit:

11 DALI: DIGITAL LIGHTING CONTROL DALI (Digital Addressable Lighting Interface) is a protocol dedicated purely to lighting control, as set out in the technical standard IEC Each unit in a DALI network has its own address, allowing direct communication with each individual fitting. TECHNICAL FEATURES The information flow with DALI is bi-directional. Rather than only giving commands about the light level from the control system to the fitting, DALI also enables information feedback on the condition of the fittings. DALI FEATURE IMAGE The fitting can transmit information related to: whether the light is switched on or off the preset light level the ballast condition Therefore DALI is ideal for use with building automation systems where remote supervising and service reports are required. 11 DELIVERING DALI EMERGENCY FEEDBACK The DALI lighting control unit (LCU) incorporates a KNX to DALI interface that enables full DALI control in addressable mode, and also facilitates the feedback from the DALI network back onto the KNX bus. Utilising widely available KNX gateways, this DALI feedback can then be fed into building management systems (BMS) or other monitoring and reporting software, allowing emergency lighting test data to be logged and alarms raised should essential maintenance be required. For more information about DALI, visit:

12 The simple way to instant energy savings Combining lighting management sensors with traditional light switches puts users in complete control. Lights can be manually switched on and off or, if users forget to switch off lights, the sensors will do so automatically. EVEN GREATER SAVINGS Independent research shows that the added control available through using absence detection can provide an additional 10% energy saving over and above the significant savings already offered by presence detection. IN DARKNESS Users feel in complete control by turning on lights using a traditional switch, typically located by the door IN BRIGHT LIGHT The sensor will automatically switch off lights to save energy when available light is sufficient (although lights can still be switched on if preferred)* IN NORMAL LIGHT The sensor will automatically switch on lights when movement is detected and available light is insufficient* 12 IN WEAK LIGHT When leaving the room, lights can be manually turned off using a switch. If lights are not turned off, the occupancy sensor will do so automatically ENERGY SAVING Lighting controls are eligible for 100% Enhanced Capital Allowance under the Carbon Trust administered scheme. energy saving * Lux levels can be set according to user preferences

13 THE RIGHT TECHNOLOGY FOR EVERY ENVIRONMENT Legrand lighting management solutions are available in three different technologies to provide effective occupancy detection in different environments... all of which can be controlled and commissioned remotely at the touch of a button. For small, enclosed spaces PIR sensors detect occupancy using the heat difference between people and the ambient space. For large spaces and open areas Ultrasonic sensors transmit sound waves throughout an area and measure the speed at which they come back. For spaces with low or infrequent movement from occupants Dual technology, as the name suggests, combines both infra-red and ultrasonic detection. 13 REMOTE CONFIGURATORS FOR INSTANT PROGRAMMING OF EACH SENSOR Sensors can be quickly and easily re-configured at the touch of a button, and without the need to ever remove the sensors from the ceiling... putting users in complete control and reducing health and safety risks. Advanced commissioning tool with LCD display - Precise digital programming - Instant visibility of individual sensor settings - PIR / ultrasonic priority preferences for dual technology sensors Basic commissioning tool - Pre-programmed settings Save time. Save money. And, of course, save energy.

14 Legrand... supporting you from initial design through installation and beyond DEDICATED DESIGN TEAM Lighting control units can either be supplied unprogrammed for third party system integration, or complete with a full in-house project design and commissioning service. Our experienced team provides support at all stages of a project, from the outline brief through to final site commissioning. Sales engineers work with designers at the early stages of a project to recommend optimum Buscom layouts and lighting control options. This service is backed by a specialist support team who are on hand to work with clients to complete detailed design schemes and provide full support through the installation phase. BESPOKE SOLUTIONS Every project is unique and sets its own challenges. Our bespoke product development service enables us to provide solutions to these challenges, and has delivered tailor-made lighting control installations in a wide range of building developments, including: Terminal 5, Heathrow, London Underground, Canary Wharf and Central Bank of Kuwait. 14

15 TRUSTED THOUGHOUT THE UK AND ACROSS THE WORLD LIGHTRAK PROJECTS Royal Bank of Scotland Delhi, India Fidelity Investments Delhi, India Cyprus Postal Service Nicosia, Cyprus 2 x ITTL Showrooms Nicosia, Cyprus Barclays Bank Pane, India UKPS Liverpool, England Lloyds TSB Bank Old Broad Street, London, England Bridgewater Place, Mixed use Development Leeds, England Lloyds TSB Card Contact Centre - Petrifies, Scotland Gray s School of Art - Robert Gordon University, Aberdeen, Scotland Rolls Royce - Glasgow, Scotland Liverpool School of Tropical Medicine Office and Labs University of Liverpool, England Quorum Business Park, Office Development (16 Buildings) - Newcastle upon Tyne, England Mann Island, Office Development Liverpool, England Rotherham Civic Quarters, Local Government Offices - Rotherham, England First Street Manchester, Manchester City Council - England Velocity Buildings, Office Development - Brooklands, Surrey, England Broadgate West, Office Development London, England Abbey Gardens, Office Development - Reading, England HSE Dublin, Ireland KPMG Manchester, England KPMG Watford, England Rackspace Data Centre Slough, England Translational Research Building Newcastle University, England Shadon House Care Facility Gateshead, England 15

16 Lightrak KNX lighting control system system components, lighting control units (LCUs) and sub-cabling to luminaires Feed unit See p Buscom mounting power supply unit FFA010 Luminaire sub cabling FFE115 Powered line coupler FFA008 Timed event controller FFA004 Lighting control unit FFD /- - - Dimensions and technical information (p ) Proprietory lighting control system to work alongside Electrak s 25 and 40 A buscom trunking with integral communications bus Offers high speed installation and unrivaled flexibility for future reconfiguration. PC configurable, covers all lighting control requirements Based on the KNX open protocol and compatible with 1-10 V, DSI and DALI lighting installations Designed and manufactured in the UK from robust galvanised steel Pack Cat. Nos. System components Pack Cat. Nos. Sub-cabling to luminaires 1 FFA001 Statutory warning plaque 1 FFA004 Timed event controller (flush) 1 FFA006 Timed event controller (surface) 1 FFA008 Powered line coupler 1 FFA010 Buscom mounting power supply unit 1 FFA012 Line power supply 1 FFA014 KNX signal cable 100 m 1 FFA016 USB to KNX interface Lighting control units (LCUs) 9 outputs (fully addressable) Analogue dimming (1-10 V) 1 FFD054 Buscom mounting (standard buscom) 1 FFD054B1 L1 Key B buscom mounting (3 phase buscom) 1 FFD054B2 L2 Key B buscom mounting (3 phase buscom) 1 FFD054B3 L3 Key B buscom mounting (3 phase buscom) 1 FFD055 Rewirable surface mounting Digital dimming (DSI) 1 FFD056 Buscom mounting (standard buscom) 1 FFD056B1 L1 Key B buscom mounting (3 phase buscom) 1 FFD056B2 L2 Key B buscom mounting (3 phase buscom) 1 FFD056B3 L3 Key B buscom mounting (3 phase buscom) 1 FFD057 Rewirable surface mounting NEW DALI (digital addressable lighting interface) 1 FFD060 Buscom mounting (standard buscom) 1 FFD060B1 L1 Key B buscom mounting (3 phase buscom) 1 FFD060B2 L2 Key B buscom mounting (3 phase buscom) 1 FFD060B3 L3 Key B buscom mounting (3 phase buscom) 1 FFD061 Rewirable surface mounting Plugs only 1 FFE080 6 pole rewirable plug (male) Pre-wired plugs and leads (5 m LSOH) 1 FFE085 With 6 pole male plug to free end 5 core 1 FFE095 With 6 pole male plug to free end 6 core 1 FFE115 With 6 pole male plug to 6P female plug 6 core 1 FFE135 With 6 pole male plug to 4P female plug 4 core 1 FFE120 With 6 pole male plug to free end 3 core no dimming 1 FFE125 With 6 pole male plug to free end 4 core no dimming 16

17 Lightrak KNX lighting control system standard switching devices - - -/- - - Lighting control unit See p. 16 Multi-gang switch interface FFB /- - - Presence detector FFC047 1 gang switch FFB030 1 gang key switch FFB032 4 gang switch FFB022-4 Dimensions and technical information (p ) Standard switching devices connect into the system via simple CAT 5 cabling either straight into a lighting control unit or into a multi-gang switch interface. The inputs of the control units are addressable and can be commissioned to control any output or group of outputs throughout the entire KNX network. Future layout changes can be accommodated easily as all control units are plug and play and can be re-commissioned through KNX ETS software Pack Cat. Nos. Standard presence detector Pack Cat. Nos. CAT 5 cabling to switching devices Plug into lighting control unit 1 FFC047 Presence detector Switches Switches for 1 gang back box Plug into lighting control unit (see p. 16) 1 FFB030 1 gang switch 1 FFB032 1 gang key switch 1 FFB033 1 gang key switch surface (including back box) 1 FFB034 2 gang switch Switches for 2 gang back box Plug into multi-gang switch interface (Cat. No. FFB020) 1 FFB gang switch 1 FFB gang switch 1 FFB gang switch Switches for 2 x 2 gang back box Plug into multi-gang switch interface (Cat. No. FFB020) 1 FFB gang switch 1 FFB gang switch 1 FFB gang switch 1 FFB gang switch Multi-gang switch interface 1 FFB020 Buscom mounted multi-gang switch interface Back boxes 1 FFB036 1 gang 1 FFB026 2 gang 1 FFB028 2 x 2 gang 1 FFF205 5 m CAT 5 lead plug to plug 1 FFF m CAT 5 lead plug to plug 17

18 Lightrak KNX lighting control system sub-bus addressable devices NEW Available 2013 FFC020 FFC052 FFC055 FFC058 FFC021 FFC050 FFC059 FFC023 FFC024 Technical information (p. 21) Addressable sensing and switching devices can be connected in series on a sub-bus Each sub-bus connects onto the KNX network via a sub-bus to KNX interface unit The addressable sensors offer a higher level of capability and functionality : Factory set to presence mode, absence mode activated by commissioning tool Factory pre-set light level threshold 500 lux for false ceiling, 300 lux for surface mounting / flush mounting detectors Factory pre-set time delay 15 minutes Precise adjustment on-site via commissioning tool Devices can be commissioned to control any output or group of outputs throughout the entire KNX network. Future layout changes can be accommodated easily as all devices can be re-commissioned through KNX ETS software Pack Cat. Nos. Sub-bus to KNX interface unit 1 FFC020 Buscom mounting interface unit Sub-bus sensors commissioning tool 1 FFC021 Digital hand-held commissioning tool Sub-bus sensors ceiling mounting Connect into interface unit (Cat. No. FFC020) With absence and presence modes Includes 5 m connection lead PIR sensor Detection field 45 m 2 Ø 8 m Optimum distance between detectors : 6 m 1 FFC050 PIR ceiling mounting switch sensor FFC051 Surface mounting box for FFC050 Combined PIR and ultrasonic sensor Detection field 90 m 2 Ø 11 m Optimum distance between detectors : 10 m 1 FFC052 PIR and ultrasonic ceiling mounting sensor FFC053 Surface mounting box for FFC052 Sub-bus sensors wall mounting Connect into interface unit (Cat. No. FFC020) With absence and presence modes Includes 10 m connection lead PIR sensor Maximum range 8 m IP 42 1 FFC054 PIR wall mounting sensor 180 Combined PIR and ultrasonic sensor Maximum range 11 m IP 42 1 FFC055 PIR and ultrasonic wall mounting sensor 180 IP 55 sensor Maximum range 15 m IP 55 1 FFC056 PIR wall mounting sensor 270 Pack Cat. Nos. Sub-bus sensor for corridors Connects into interface unit (Cat. No. FFC020) With absence and presence modes Includes 10 m connection lead Maximum range 30 m IP 42 1 FFC057 PIR sensor 140 IR remote control For sub-bus sensors (client use) 1 FFC058 On / off dimming controller Other sub-bus devices Light measurement cell Connects into interface unit (Cat. No. FFC020) Includes 5 m lead 1 FFC059 Photocell light level sensor Sub-bus switches Connect into interface unit (Cat. No. FFC020) Includes 10 m connection lead Complete with brushed stainless steel plate, yolk and magnesium rockers 1 FFC030 2 gang 2 way sub-bus switch 1 FFC033 4 scenario sub-bus switch Sub-bus accessories 1 FFC022 Sub-bus cable 100 m 1 FFC023 RJ45 doubler unit to extend sub-bus 1 FFC024 Sub-bus to RJ45 connector 18

19 Lightrak KNX lighting control system technical information n KNX technical specification Each line coupler can support 64 bus devices (lighting control units, multi-gang switch interface units, bus interface units etc) A maximum of 15 line couplers may be linked with a main bus line together to form an area; therefore an area can support up to 960 devices The system may be further expanded with the addition of a backbone bus line which would allow the linking together of 15 main bus lines via 15 line couplers, therefore any single system could support devices By utilising additional line couplers this total can exceed devices (for additional information, please contact us on +44 (0) ) Within any KNX bus line the following cable lengths are permitted : Power supply unit to bus device 350 m maximum Bus device to bus device 700 m maximum Total bus line length m maximum Minimum distance between 2 power supply units on one line is 200 m (1) n Powered line coupler FFA008 Connections 230 V± : screw connection block Primary line : screw connection block Secondary line : screw connection block Physical specifications Housing : galvanised steel, natural finish Dimensions : length 358 mm, width 200 mm, depth 75 mm Weight : approximately kg Technical specifications Supply voltage : 230V± 50/60Hz Protection (supply) : 13 A BS 1362 fused spur Internal protection : 6 3 A fuse to IEC127-2 Primary line load : 15 mw Secondary line load : 200 mw Secondary output voltage : 30Vdc +/- 2 V Secondary output current : 630 ma EMC complies with : EN : 1997, EN 55022B Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified n Buscom trunking mounted power supply unit FFA010 Connections 230 V± : Electrak integrated tap-off Bus : Electrak integrated tap-off Physical specifications Housing : galvanised steel, natural finish Dimensions : length 330 mm, width 110 mm, height 60 mm 9 mm bracket clearance from busbar trunking Weight : approximately 1 90 kg Technical specifications Supply voltage : 230 V± 50/60 Hz Protection (supply) : 13 A BS 1362 fuse fitted in tap-off Internal protection : 6 3 A fuse to IEC Secondary output voltage : 30 Vdc +/- 2 V Secondary output current : 640 ma Tap-off ASTA approved : BS EN : 2000 EMC complies with : EN :1997, EN 55022B Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified n Line power supply FFA012 Connections 230 V± : screw connection block Bus : screw connection block Physical specifications Housing : galvanised steel, natural finish Dimensions : length 358 mm, width 110 mm, depth 75 mm Weight : approximately 1 95 kg Technical specifications Supply voltage : 230 V± 50/60Hz Protection (supply) : 13 A BS 362 fused spur Internal protection : 6 3 A fuse to IEC Secondary output voltage : 30 Vdc +/- 2 V Secondary output current : 640 ma EMC complies with : EN : 1997, EN 55022B Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified (1) Electrak manufacture a buscom trunking mounted power supply unit for this application, Cat. No. FFA010 see p. 16 All dimensions (mm) are nominal 19

20 Lightrak KNX lighting control system technical information n Lighting control unit analogue dimming Cat. Nos. FFD054/FFD055 Connections 4 RJ45 inputs : CAT 5 providing switching input 9 GST/6 providing 230 V± to luminaires L1 Switched live brown E Earth green / yellow N Neutral blue L2 Maintained live black 2 Dimming common white 3 Dimming red Physical specifications Housing : galvanised steel, natural finish Dimensions : length 358 mm, width 182 mm, depth 35 mm plus 9 mm bracket clearance from buscom trunking Weight : approximately 1 75 kg Technical specifications Supply voltage : 230 V± 50/60Hz Maximum load : 10 A BS 1362 fuse fitted in tap-off Maximum power : VA Bus voltage : 30 Vdc +/- 2 V Tap-off ASTA approved : BS EN : 2000 EMC complies with : EN : 1997 Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified n Lighting control unit DSI dimming Cat. Nos. FFD056/ FFD057 Connections 4 RJ45 inputs : CAT 5 providing switching input 9 GST/6 providing 230 V± to luminaires L1 Switched live brown E Earth green / yellow N Neutral blue L2 Maintained live black 2 Dimming common white 3 Dimming red Physical specifications Housing : galvanised steel, natural finish Dimensions : length 358 mm, width 182 mm, depth 35 mm plus 9 mm bracket clearance from buscom trunking Weight : approximately 1 75 kg Technical specifications Supply voltage : 230 V± 50/60 Hz Maximum load : 10 A BS 1362 fuse fitted in tap-off Maximum power : VA Bus voltage : 30 Vdc +/- 2 V Tap-off ASTA approved : BS EN : 2000 EMC complies with : EN : 1997 Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified n 4 gang switch Cat. No. FFB022-4 Physical specifications Housing : steel back box 132 mm x 72 mm minimum 48 mm deep Dimensions : length 125 mm, width 64 mm, height 41 mm Weight : approximately kg Technical specifications Supply voltage : 9 Vdc EMC complies with : EN : 1997 Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified n 8 gang switch Cat. No. FFB024-8 Physical specifications Housing : steel back box 136 mm x 136 mm minimum 52 mm deep Dimensions : length 127 mm, width 122 mm, height 41 mm Weight : approximately 1 30 kg Technical specifications Supply voltage : 9 Vdc EMC complies with : EN : 1997 Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified n Multi-gang switch interface Cat. No. FFB020 Connections 230 V± : Electrak integrated tap-off Bus : Electrak integrated tap-off Switch : CAT 5 lead (RJ45 to RJ45) Physical specifications Housing : galvanised steel, natural finish Dimensions : length 126 mm, width 102 mm, height 46 mm plus 9 mm mounting bracket Weight : approximately 0 66 kg Technical specifications Supply voltage : 230 V± 50/60 Hz Protection : 3 A BS 1362 fuse fitted in tap-off Nominal load : 24 ma Maximum bus load : 12 ma Tap-off ASTA approved : BS EN : 2000 EMC complies with : EN : 1997 Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified n Lighting control unit dimensions Cat. Nos. FFD054, FFD056, FFD060 n Lighting control unit DALI Cat. Nos. FFD060/FFD061 Connections 4 RJ45 inputs : CAT 5 providing switching input 9 GST/6 providing 230 V± to luminaires L1 Switched live brown E Earth green / yellow N Neutral blue 2 DALI 3 DALI Physical specifications Housing : galvanised steel, natural finish Dimensions : length 358 mm, width 182 mm, depth 35 mm plus 9 mm bracket clearance from buscom trunking Weight : approximately 1 75 kg Technical specifications Supply voltage : 230 V± 50/60 Hz Maximum load : 10 A Maximum power : VA KNX bus voltage : 30 Vdc +/- 2 V Tap-off ASTA approved : BS EN : 2000 EMC complies with : EN : 1997 Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x All dimensions (mm) are nominal 20

21 Lightrak KNX lighting control system sub-bus sensors technical information n Ceiling mounting All sub-bus sensors have built-in bracket systems that enable ceiling mounting. Most sensors are suitable for standard EU boxes (Ø 65). This is important for applications where the ceiling is unavailable for sensor installation. Only one Cat. No. is required for two ways of mounting n Sub-bus to KNX interface unit FFC020 Connections Bus : Electrak integrated tap-off connecting 230 V± and KNX bus Physical specifications Housing : galvanised steel, natural finish Dimensions : length 125 mm, width 154 mm, height 72 mm plus 9 mm mounting bracket Technical specifications Supply voltage : 230 V± 50/60 Hz Protection : 3 A BS 1362 fuse fitted in tap-off Tap-off ASTA approved : BS EN : 2000 EMC complies with : EN : 1997 Climatic condition class : 3K4 (5ºC to 40ºC) IP rating : 4x Certification : KNX certified n Wall mounting Wall mounting sensors are supplied with mounting base Simply fix base to the wall, connect wires to the automatic wiring block and fix sensor to base n Settings Most sensors feature Smart Factory Set technology. Adjustments are typically not needed after installation If adjustments need to be made (due to last minute changes in furniture or fixture placement), sensitivity and time delays should match the activity levels of the monitored spaces Hand-held commissioning tool can be used to adjust settings : This commissioning tool enables a very precise commissioning of your sensors : - Time: from 0 seconds to 60 min - Lux: from 1 lux to lux - Detection mode : presence, presence walkthrough, absence modes - PIR and US detection sensibility : low, medium, high, very high - Provides access to advanced functions such as calibration, alarms, choice of mode of detection (initial detection, maintain detection, retrigger), daylight function - Allows downloading, saving and duplication of sensor parameters Cat.No FFC021 Presence mode 3' Walkthrough mode Absence mode 21

22 Lightrak KNX lighting control system typical layout and system topology n KNX system topology schematic diagram Example of typical layout Main line powered line coupler Bus line (max. 64 LCU) Bus line (max. 64 LCU) Repeater power line coupler (maximum) KNX standard (maximum) bus cable AREA 1 main bus line KNX standard bus cable interconnecting main line powered line coupler AREA 2 main bus line AREA 3 main bus line Backbone powered line coupler 1.0. Backbone power supply unit KNX standard bus cable interconnecting backbone powered line coupler Backbone bus line AREA 4 main bus line AREA 15 main bus line (maximum) n Example of ceiling layout for Lightrak KNX fully addressable system (see opposite) Layout key Electrical distribution board and power cabling Powered line coupler and KNX cabling Timed event controller Buscom feed unit and lengths 1/1 Lighting control unit and reference number Luminaires and sub-cabling Standard presence detector and CAT 5 sub cabling Sub-bus interface unit and sub-bus cabling PIR bus sensor Dual technology (PIR and ultrasonic) bus sensor Bus switch Bus scenario switch 22

23 Cat A lighting layout 1/2 2/2 5/2 3/2 4/2 5/1 4/1 1/1 2/1 3/1 6/1 6/2 The left hand area fitted out to Cat B tenant layout 1/5 2/5 3/3 1/4 1/3 2/4 3/2 4/2 5/2 2/3 5/1 1/2 4/1 2/2 1/1 2/1 3/1 6/1 6/2 23

24 Electrak pour exemple buscom XXXXXXxxxxxx trunking 2P, xxxxxxxx 3P, dual circuit and 3 phase systems 3 m track 0 5 m spacings 2 m track 0 5 m spacings 3 m track 1 0 m spacings 2 m track 1 0 m spacings SYSTEM IP RATING RATING OUTLETS Electrak 30 2P + E system IP 4X IP A 40 A 25 A 40 A Single sided BBA3145C BBA2145C BBA3141C BBA2141C Double sided BBA3245C BBA2245C BBA3241C BBA2241C Single sided CCA3145C CCA2145C CCA3141C CCA2141C Double sided CCA3245C CCA2245C CCA3241C CCA2241C Single sided BBA3155C BBA2155C BBA3151C BBA2151C Double sided BBA3255C BBA2255C BBA3251C BBA2251C Single sided CCA3155C CCA2155C CCA3151C CCA2151C Double sided CCA3255C CCA2255C CCA3251C CCA2251C Electrak 31 3P + E system IP 4X IP A 40 A 25 A 40 A Single sided BBB3145C BBB2145C BBB3141C BBB2141C Double sided BBB3245C BBB2245C BBB3241C BBB2241C Single sided CCB3145C CCB2145C CCB3141C CCB2141C Double sided CCB3245C CCB2245C CCB3241C CCB2241C Single sided BBB3155C BBB2155C BBB3151C BBB2151C Double sided BBB3255C BBB2255C BBB3251C BBB2251C Single sided CCB3155C CCB2155C CCB3151C CCB2151C Double sided CCB3255C CCB2255C CCB3251C CCB2251C Electrak 32 Dual circuit system IP 4X IP A 40 A 25 A 40 A Single sided BBC3145C BBC2145C BBC3141C BBC2141C Double sided BBC3245C BBC2245C BBC3241C BBC2241C Single sided CCC3145C CCC2145C CCC3141C CCC2141C Double sided CCC3245C CCC2245C CCC3241C CCC2241C Single sided BBC3155C BBC2155C BBC3151C BBC2151C Double sided BBC3255C BBC2255C BBC3251C BBC2251C Single sided CCC3155C CCC2155C CCC3151C CCC2151C Double sided CCC3255C CCC2255C CCC3251C CCC2251C Electrak 33 3 phase system IP 4X IP A 40 A 25 A 40 A Single sided BBD3145C BBD2145C BBD3141C BBD2141C Double sided BBD3245C BBD2245C BBD3241C BBD2241C Single sided CCD3145C CCD2145C CCD3141C CCD2141C Double sided CCD3245C CCD2245C CCD3241C CCD2241C Single sided BBD3155C BBD2155C BBD3151C BBD2151C Double sided BBD3255C BBD2255C BBD3251C BBD2251C Single sided CCD3155C CCD2155C CCD3151C CCD2151C Double sided CCD3255C CCD2255C CCD3251C CCD2251C 24

25 Centre feed Suspended feed unit left hand Suspended feed unit right hand Surface feed unit left hand Surface feed unit right hand Suspended flexible corner 0 5 m Suspended flexible corner 2 0 m Surface flexible corner 0 5 m Surface flexible corner 2 0 m BBA44FC BBA14LFC BBA14RFC BBA34LFC BBA34RFC BBA140XC BBA142XC BBA340XC BBA342XC BBA24LFC BBA24RFC BBA240XC BBA242XC CCA44FC CCA14LFC CCA14RFC CCA34LFC CCA34RFC CCA140XC CCA142XC CCA340XC CCA342XC CCA24LFC CCA24RFC CCA240XC CCA242XC BBA15LFC BBA15RFC BBA35LFC BBA35RFC BBA150XC BBA152XC BBA350XC BBA352XC BBA25LFC BBA25RFC BBA250XC BBA252XC CCA15LFC CCA15RFC CCA35LFC CCA35RFC CCA150XC CCA152XC CCA350XC CCA352XC CCA25LFC CCA25RFC CCA250XC CCA252XC BBB44FC BBB14LFC BBB14RFC BBB34LFC BBB34RFC BBB140XC BBB142XC BBB340XC BBB342XC BBB24LFC BBB24RFC BBB240XC BBB242XC CCB44FC CCB14LFC CCB14RFC CCB34LFC CCB34RFC CCB140XC CCB142XC CCB340XC CCB342XC CCB24LFC CCB24RFC CCB240XC CCB242XC BBB15LFC BBB15RFC BBB35LFC BBB35RFC BBB150XC BBB152XC BBB350XC BBB352XC BBB25LFC BBB25RFC BBB250XC BBB252XC CCB15LFC CCB15RFC CCB35LFC CCB35RFC CCB150XC CCB152XC CCB350XC CCB352XC CCB25LFC CCB25RFC CCB250XC CCB252XC BBC44FC BBC14LFC BBC14RFC BBC34LFC BBC34RFC BBC140XC BBC142XC BBC340XC BBC342XC BBC24LFC BBC24RFC BBC240XC BBC242XC CCC44FC CCC14LFC CCC14RFC CCC34LFC CCC34RFC CCC140XC CCC142XC CCC340XC CCC342XC CCC24LFC CCC24RFC CCC240XC CCC242XC BBC15LFC BBC15RFC BBC35LFC BBC35RFC BBC150XC BBC152XC BBC350XC BBC352XC BBC25LFC BBC25RFC BBC250XC BBC252XC CCC15LFC CCC15RFC CCC35LFC CCC35RFC CCC150XC CCC152XC CCC350XC CCC352XC CCC25LFC CCC25RFC CCC250XC CCC252XC BBD44FC BBD14LFC BBD14RFC BBD34LFC BBD34RFC BBD140XC BBD142XC BBD340XC BBD342XC BBD24LFC BBD24RFC BBD240XC BBD242XC CCD44FC CCD14LFC CCD14RFC CCD34LFC CCD34RFC CCD140XC CCD142XC CCD340XC CCD342XC CCD24LFC CCD24RFC CCD240XC CCD242XC BBD15LFC BBD15RFC BBD35LFC BBD35RFC BBD150XC BBD152XC BBD350XC BBD352XC BBD25LFC BBD25RFC BBD250XC BBD252XC CCD15LFC CCD15RFC CCD35LFC CCD35RFC CCD150XC CCD152XC CCD350XC CCD352XC CCD25LFC CCD25RFC CCD250XC CCD252XC 25

26 Electrak pour exemple buscom XXXXXXxxxxxx trunking tap-offs xxxxxxxx 13 A FUSED TAP-OFFS Rewirable 0 8 m 2 m 3 m 5 m Electrak 30 2P + E system L+ N SYSTEM PHASE IP RATING IP 4X IP 54 With comms DDE408FC DDE42FC DDE43FC DDE45FC No comms DDF4F DDE408F DDE42F DDE43F DDE45F With comms DDE508FC DDE52FC DDE53FC DDE55FC No comms DDF5F DDE508F DDE52F DDE53F DDE55F Electrak 31 3P + E system L1 N L1 L2 N IP 4X IP 54 IP 4X IP 54 With comms DDE408FC DDE42FC DDE43FC DDE45FC No comms DDF4F DDE408F DDE42F DDE43F DDE45F With comms DDE508FC DDE52FC DDE53FC DDE55FC No comms DDF5F DDE508F DDE52F DDE53F DDE55F With comms DDG408FC DDG42FC DDG43FC DDG45FC No comms DDH4F DDG408F DDG42F DDG43F DDG45F With comms DDG508FC DDG52FC DDG53FC DDG55FC No comms DDH5F DDG508F DDG52F DDG53F DDG55F Electrak 32 Dual circuit system L1 N1 L2 N2 IP 4X IP 54 IP 4X IP 54 With comms DDE408FC DDE42FC DDE43FC DDE45FC No comms DDF4F DDE408F DDE42F DDE43F DDE45F With comms DDE508FC DDE52FC DDE53FC DDE55FC No comms DDF5F DDE508F DDE52F DDE53F DDE55F With comms DDJ408FC DDJ42FC DDJ43FC DDJ45FC No comms DDK4F DDJ408F DDJ42F DDJ43F DDJ45F With comms DDJ508FC DDJ52FC DDJ53FC DDJ55FC No comms DDK5F DDJ508F DDJ52F DDJ53F DDJ55F L1 N IP 4X IP 54 With comms DDM408L1FC DDM42L1FC DDM43L1FC DDM45L1FC No comms DDN4L1F DDM408L1F DDM42L1F DDM43L1F DDM45L1F With comms DDM508L1FC DDM52L1FC DDM53L1FC DDM55L1FC No comms DDN5L1F DDM508L1F DDM52L1F DDM53L1F DDM55L1F L2 N IP 4X IP 54 With comms DDM408L2FC DDM42L2FC DDM43L2FC DDM45L2FC No comms DDN4L2F DDM408L2F DDM42L2F DDM43L2F DDM45L2F With comms DDM508L2FC DDM52L2FC DDM53L2FC DDM55L2FC No comms DDN5L2F DDM508L2F DDM52L2F DDM53L2F DDM55L2F Electrak 33 3 phase system L3 N IP 4X IP 54 With comms DDM408L3FC DDM42L3FC DDM43L3FC DDM45L3FC No comms DDN4L3F DDM408L3F DDM42L3F DDM43L3F DDM45L3F With comms DDM508L3FC DDM52L3FC DDM53L3FC DDM55L3FC No comms DDN5L3F DDM508L3F DDM52L3F DDM53L3F DDM55L3F Phase selectable IP 4X IP 54 With comms No comms DDP4SF With comms No comms DDP5SF L + L + L + N IP 4X IP 54 With comms No comms With comms No comms 26

27 16 A UNFUSED TAP-OFFS Rewirable 0 8 m 2 m 3 m 5 m DDE408C DDE42C DDE43C DDE45C DDF4 DDE408 DDE42 DDE43 DDE45 DDE508C DDE52C DDE53C DDE55C DDF5 DDE508 DDE52 DDE53 DDE55 DDE408C DDE42C DDE43C DDE45C DDF4 DDE408 DDE42 DDE43 DDE45 DDE508C DDE52C DDE53C DDE55C DDF5 DDE508 DDE52 DDE53 DDE55 DDG408C DDG42C DDG43C DDG45C DDH4 DDG408 DDG42 DDG43 DDG45 DDG508C DDG52C DDG53C DDG55C DDH5 DDG508 DDG52 DDG53 DDG55 DDE408C DDE42C DDE43C DDE45C DDF4 DDE408 DDE42 DDE43 DDE45 DDE508C DDE52C DDE53C DDE55C DDF5 DDE508 DDE52 DDE53 DDE55 DDJ408C DDJ42C DDJ43C DDJ45C DDK4 DDJ408 DDJ42 DDJ43 DDJ45 DDJ508C DDJ52C DDJ53C DDJ55C DDK5 DDJ508 DDJ52 DDJ53 DDJ55 DDM408L1C DDM42L1C DDM43L1C DDM45L1C DDN4L1 DDM408L1 DDM42L1 DDM43L1 DDM45L1 DDM508L1C DDM52L1C DDM53L1C DDM55L1C DDN5L1 DDM508L1 DDM52L1 DDM53L1 DDM55L1 DDM408L2C DDM42L2C DDM43L2C DDM45L2C DDN4L2 DDM408L2 DDM42L2 DDM43L2 DDM45L2 DDM508L2C DDM52L2C DDM53L2C DDM55L2C DDN5L2 DDM508L2 DDM52L2 DDM53L2 DDM55L2 DDM408L3C DDM42L3C DDM43L3C DDM45L3C DDN4L3 DDM408L3 DDM42L3 DDM43L3 DDM45L3 DDM508L3C DDM52L3C DDM53L3C DDM55L3C DDN5L3 DDM508L3 DDM52L3 DDM53L3 DDM55L3 DDP4S DDP5S DDR408 DDR42 DDR43 DDR45 DDR508 DDR52 DDR53 DDR55 27

28 Electrak 30 2P + E buscom trunking power and communication distribution CCA3145C CCA2145C CCA14RFC CCA142XC CCA14LFC Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Electrak 30 2 P + E + comms single sided system 2P + E buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on just one side of the bar 2P + E trunking lengths Trunking lengths push fit into each other, and feed units or flexible lengths. Trunking lengths can be surface mounted or suspended using the various bracket options 25 A Length Tap-off Weight (m) outlets (kg) (1) 1 BBA3145C BBA2145C BBA3141C BBA2141C C 40 A 1 CCA3145C CCA2145C CCA3141C CCA2141C Feed units for single sided system L N PE Feed units come with 2 x 25 mm Ø and 2 x 16 mm Ø cable entry holes and single screw cable terminals for power and data Left feed units are supplied with right end stop Right feed units are supplied with left end stop Centre feed units are supplied with right and left end stops Suspended Weight (kg) (1) 1 BBA14LFC 25 A left BBA14RFC 25 A right CCA14LFC 40 A left CCA14RFC 40 A right 1 49 Surface mounted Weight (kg) (1) 1 BBA34LFC 25 A left BBA34RFC 25 A right CCA34LFC 40 A left CCA34RFC 40 A right 1 54 Centre feed Weight (kg) (1) 1 BBA44FC 25 A CCA44FC 40 A 1 8 Pack Cat. Nos. Flexible lengths for single sided system Flexible lengths can be used to change direction, change level or overcome obstructions Suspended right to left Length Rating Weight (m) (A) (kg) (1) 1 BBA140XC BBA142XC CCA140XC CCA142XC Surface mounted right to left Length Rating Weight (m) (A) (kg) (1) 1 BBA340XC BBA342XC CCA340XC CCA342XC (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 28

29 Electrak 30 2P + E buscom trunking power and communication distribution CCA3245C CCA2245C DDE45C DDE45 DDF4F Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Electrak 30 2 P + E + comms double sided system 2P + E buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on both sides of the bar The comms circuit is only available on one side of the bar as shown in the diagram below 2P + E trunking lengths Trunking lengths push fit into each other, and feed units or flexible lengths. Double sided trunking must be fixed using suspended fixing brackets Length Tap-off Weight 25 A (m) outlets (kg) (1) 1 BBA3245C BBA2245C BBA3241C BBA2241C A 1 CCA3245C CCA2245C CCA3241C CCA2241C Feed units for double sided system Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar Single screw cable terminals are provided for power and data. Supplied with end stops Suspended Weight(kg) (1) 1 BBA24LFC 25 A left BBA24RFC 25 A right CCA24LFC 40 A left CCA24RFC 40 A right 1 61 Flexible lengths for double sided system Flexible lengths can be used to change direction, change level or overcome obstructions Suspended right to left Length Rating Weight (m) (A) (kg) (1) 1 BBA240XC BBA242XC CCA240XC CCA242XC PE N L C L N PE Pack Cat. Nos. Tap-off units with and without comms Power only tap-offs can plug into any tap-off outlet Tap-offs with comms can only be plugged into the comms side of the bar 16 A unfused tap-off units Pre-wired tap-off units to pick-up L1+N, colour coded white Length Fixed Weight (m) polarity (kg) (1) 1 DDE408C DDE42C DDE43C 3 L + N DDE45C A fused tap-off units Pre-wired tap-off units to pick-up L1+N, supplied with BS 1362 fuse, colour coded white Length Fixed Weight (m) polarity (kg) (1) 1 DDE408FC DDE42FC DDE43FC 3 L + N DDE45FC Tap-off units without comms rewirable 16 A unfused tap-off unit Rewirable tap-off unit to pick-up L1+N, colour coded white, can plug into any tap-off outlet Fixed Weight polarity (kg) (1) 1 DDF4 L + N A fused tap-off unit Rewirable tap-off unit to pick-up L1+N, supplied with BS 1362 fuse, colour coded white, can plug into any tap-off outlet Fixed Weight polarity (kg) (1) 1 DDF4F L + N 0 14 (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating and tap-off type is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 C = Tap-off with communications circuit For power only, remove the C 29

30 Electrak 31 3P + E buscom trunking power and communication distribution CCB3145C CCB2145C CCB14RFC CCB142XC CCB14LFC Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI, protocols etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Electrak 31 3P + E single sided system 3P + E buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on just one side of the bar 3P + E trunking lengths Trunking lengths push fit into each other, and feed units or flexible lengths. Trunking lengths can be surface mounted or suspended using the various bracket options 25 A Length Tap-off Weight (m) outlets (kg) (1) 1 BBB3145C BBB2145C BBB3141C BBB2141C C 40 A 1 CCB3145C CCB2145C CCB3141C CCB2141C Feed units for single sided system Feed units come with 2 x 25 mm Ø and 2 x 16 mm Ø cable entry holes and single screw cable terminals for power and data Left feed units are supplied with right end stop Right feed units are supplied with left end stop Centre feed units are supplied with right and left end stops Suspended Weight (kg) (1) 1 BBB14LFC 25 A left BBB14RFC 25 A right CCB14LFC 40 A left CCB14RFC 40 A right 1 55 Surface mounted Weight (kg) (1) 1 BBB34LFC 25 A left BBB34RFC 25 A right CCB34LFC 40 A left CCB34RFC 40 A right 1 59 Centre feed Weight (kg) (1) 1 BBB44FC 25 A CCB44FC 40 A 1 8 L 2 L1 N PE Pack Cat. Nos. Flexible lengths for single sided system Flexible lengths can be used to change direction, change level or overcome obstructions Suspended right to left Length Rating Weight (m) (A) (kg) (1) 1 BBB140XC BBB142XC CCB140XC CCB142XC Surface mounted right to left Length Rating Weight (m) (A) (kg) (1) 1 BBB340XC BBB342XC CCB340XC CCB342XC (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 30

31 Electrak 31 3P + E buscom trunking power and communication distribution CCB3245C CCB2245C DDE45C DDE45 DDH4F Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Electrak 31 3P + E double sided system 3P + E buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on both sides of the bar The comms circuit is only available on one side of the bar as shown in the diagram below 3P + E trunking lengths Trunking lengths push fit into each other, and feed units or flexible lengths. Double sided trunking must be fixed using suspended fixing brackets Length Tap-off Weight 25 A (m) outlets (kg) (1) 1 BBB3245C BBB2245C PE N C 1 BBB3241C L1 L2 1 BBB2241C L2 L1 40 A N PE 1 CCB3245C CCB2245C CCB3241C CCB2241C Feed units for double sided system Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar. Single screw cable terminals are provided for power and data Suspended Weight (kg) (1) 1 BBB24LFC 25 A left BBB24RFC 25 A right CCB24LFC 40 A left CCB24RFC 40 A right 1 72 Flexible lengths for double sided system Flexible lengths can be used to change direction, change level or overcome obstructions Suspended right to left Length Rating Weight (m) (A) (kg) (1) 1 BBB240XC BBB242XC CCB240XC CCB242XC Pack Cat. Nos. Tap-off units with and without comms Power only tap-offs can plug into any tap-off outlet Tap-offs with comms can only be plugged into the comms side of the bar 16 A unfused tap-off units Pre-wired tap-off units to pick up L1, L2+N, colour coded white Length Fixed Weight (m) polarity (kg) (1) 1 DDE408C DDE42C DDE43C 3 L + N DDE45C DDG408C DDG42C DDG43C 2 3 L1 + L2 + N DDG45C A fused tap-off units Pre-wired tap-off units to pick-up L1, L2+N, supplied with BS 1362 fuse, colour coded white Length Fixed Weight (m) polarity (kg) (1) 1 DDE408FC DDE42FC DDE43FC 3 L + N DDE45FC DDG408FC DDG42FC DDG43FC 2 3 L1 + L2 + N DDG45FC Tap-off units without comms rewirable 16 A unfused tap-off unit Rewirable tap-off units colour coded white, can plug into any tap-off outlet Fixed Weight polarity (kg) (1) 1 DDF4 L + N DDH4 L1 L2 N A fused tap-off unit Rewirable tap-off units supplied with BS 1362 fuse, colour coded white, can plug into any tap-off outlet Fixed Weight polarity (kg) (1) 1 DDF4F L + N DDH4F L1 L2 N (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating and tap-off type is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 C = Tap-off with communications circuit. For power only, remove the C 31

32 Electrak 32 4P + E (dual circuit) buscom trunking power and communication distribution CCC3145C CCC2145C CCC14RFC CCC142XC CCC14LFC Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Electrak 32 4P + E (dual circuit) single sided system Dual circuit buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on just one side of the bar 4 P + E trunking lengths Trunking lengths push fit into each other, and feed units or flexible lengths. Trunking lengths can be surface mounted or suspended using the various bracket options Length Tap-off Weight 25 A (m) outlets (kg) (1) 1 BBC3145C BBC2145C BBC3141C C 1 BBC2141C A 1 CCC3145C CCC2145C CCC3141C CCC2141C Feed units for single sided system Feed units come with 2 x 25 mm Ø and 2 x 16 mm Ø cable entry holes and single screw cable terminals for power and data Left feed units are supplied with right end stop Right feed units are supplied with left end stop Centre feed units are supplied with right and left end stops Suspended Weight (kg) (1) 1 BBC14LFC 25 A left BBC14RFC 25 A right CCC14LFC 40 A left CCC14RFC 40 A right 1 61 Surface mounted Weight (kg) (1) 1 BBC34LFC 25 A left BBC34RFC 25 A right CCC34LFC 40 A left CCC34RFC 40 A right 1 65 Centre feed Weight (kg) (1) 1 BBC44FC 25 A CCC44FC 40 A 1 8 L2 N2 L1 N1 PE Pack Cat. Nos. Flexible lengths for single sided system Flexible lengths can be used to change direction, change level or overcome obstructions Suspended right to left Length Rating Weight (m) (A) (kg) (1) 1 BBC140XC BBC142XC CCC140XC CCC142XC Surface mounted right to left Length Rating Weight (m) (A) (kg) (1) 1 BBC340XC BBC342XC CCC340XC CCC342XC (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 32

33 Electrak 32 4P + E (dual circuit) buscom trunking power and communication distribution CCC3245C CCC2245C DDJ45C DDJ45 DDK4F Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Electrak 32 4P + E (dual circuit) double sided system Dual circuit buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded white and are located on both sides of the bar The comms circuit is only available on one side of the bar as shown in the diagram below 4 P + E trunking lengths Trunking lengths push fit into each other, and feed units or flexible lengths. Double sided trunking must be fixed using suspended fixing brackets Length Tap-off Weight 25 A (m) outlets (kg) (1) 1 BBC3245C BBC2245C BBC3241C PE N1 C 1 BBC2241C A 1 CCC3245C CCC2245C CCC3241C CCC2241C Feed units for double sided system Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar. Single screw cable terminals are provided for power and data Supplied with end stops Suspended Weight (kg) (1) 1 BBC24LFC 25 A left BBC24RFC 25 A right CCC24LFC 40 A left CCC24RFC 40 A right 1 83 Flexible lengths for double sided system Flexible lengths can be used to change direction, change level or overcome obstructions Suspended right to left Length Rating Weight (m) (A) (kg) (1) 1 BBC240XC BBC242XC CCC240XC CCC242XC L1 N2 L2 L2 N2 L1 N1 PE Pack Cat. Nos. Tap-off units with and without comms Power only tap-offs can plug into any tap-off outlet Tap-offs with comms can only be plugged into the comms side of the bar 16 A unfused tap-off units Pre-wired tap-off units to pick up L1+N1 or L2+N2, colour coded white Length Fixed Weight (m) polarity (kg) (1) 1 DDE408C DDE42C DDE43C 3 L1 + N DDE45C DDJ408C DDJ42C DDJ43C 2 3 L2 + N DDJ45C A fused tap-off units Pre-wired tap-off units to pick up L1+N1 or L2+N2, supplied with BS 1362 fuse, colour coded white Length Fixed Weight (m) polarity (kg) (1) 1 DDE408FC DDE42FC DDE43FC 3 L1 + N DDE45FC DDJ408FC DDJ42FC DDJ43FC 2 3 L2 + N DDJ45FC Tap-off units without comms rewirable 16 A unfused tap-off units Rewirable tap-off units to pick up required circuit, colour coded white, can plug into any tap-off outlet Fixed Weight polarity (kg) (1) 1 DDF4 L1 + N DDK4 L2 + N A fused tap-off units Rewirable tap-off units to pick up required circuit, supplied with BS 1362 fuse, colour coded white, can plug into any tap-off outlet Fixed Weight polarity (kg) (1) 1 DDF4F L1 + N DDK4F L2 + N (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating and tap-off type is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 C = Tap-off with communications circuit. For power only, remove the C 33

34 Electrak 33 4P + E (3 phase) buscom trunking power and communication distribution CCD3145C CCD2145C CCD14RFC CCD142XC CCD14LFC Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Electrak 33 4P + E (3 phase) single sided system 3 phase buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded grey and are located on just one side of the bar 4 P + E trunking lengths Trunking lengths push fit into each other, and feed units or flexible lengths. Trunking lengths can be surface mounted or suspended using the various bracket options 25 A Length Tap-off Weight (m) outlets (kg) (1) 1 BBD3145C BBD2145C BBD3141C C 1 BBD2141C L3 40 A 1 CCD3145C CCD2145C CCD3141C CCD2141C Feed units for single sided system Feed units come with 2 x 25 mm Ø and 2 x 16 mm Ø cable entry holes and single screw cable terminals for power and data Left feed units are supplied with right end stop Right feed units are supplied with left end stop Centre feed units are supplied with right and left end stops Suspended Weight (kg) (1) 1 BBD14LFC 25 A left BBD14RFC 25 A right CCD14LFC 40 A left CCD14RFC 40 A right 1 61 Surface mounted Weight (kg) (1) 1 BBD34LFC 25 A left BBD34RFC 25 A right CCD34LFC 40 A left CCD34RFC 40 A right 1 65 Centre feed Weight (kg) (1) 1 BBD44FC 25 A CCD44FC 40 A 1 80 L2 L1 N1 PE Pack Cat. Nos. Flexible lengths for single sided system Flexible lengths can be used to change direction, change level or overcome obstructions Suspended right to left Length Rating Weight (m) (A) (kg) (1) 1 BBD140XC BBD142XC CCD140XC CCD142XC Surface mounted right to left Length Rating Weight (m) (A) (kg) (1) 1 BBD340XC BBD342XC CCD340XC CCD342XC (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 34

35 Electrak 33 4P + E (3 phase) buscom trunking power and communication distribution CCD3245C CCD2245C DDM408L1C DDM408L1 Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Electrak 33 4P + E (3 phase) double sided system 3 phase buscom trunking system with integral communications bus circuit available in IP 4X and IP 54 versions Socket outlets are colour coded grey and are located on both sides of the bar The comms circuit is only available on one side of the bar as shown in the diagram below 4 P + E trunking lengths Trunking lengths push fit into each other, and feed units or flexible lengths. Double sided trunking must be fixed using suspended fixing brackets Length Tap-off Weight 25 A (m) outlets (kg) (1) PE 1 BBD3245C C 1 BBD2245C N L3 1 BBD3241C L1 L2 L2 L1 1 BBD2241C L3 N 40 A PE 1 CCD3245C CCD2245C CCD3241C CCD2241C Feed units for double sided system Double sided feed units come with 2 x 25 mm Ø cable entry holes for each side of the bar, plus a further 2 x 16 mm Ø. holes for the comms side of the bar. Single screw cable terminals are provided for power and data Suspended Weight (kg) (1) 1 BBD24LFC 25 A left BBD24RFC 25 A right CCD24LFC 40 A left CCD24RFC 40 A right 1 83 Flexible lengths for double sided system Flexible lengths can be used to change direction, change level or overcome obstructions Suspended right to left Length Rating Weight (m) (A) (kg) (1) 1 BBD240XC BBD242XC CCD240XC CCD242XC Pack Cat. Nos. Tap-off units Power only tap-offs can plug into any tap-off outlet of the 3 phase bar Tap-offs with comms can only be plugged into the comms side of the 3 phase bar 16 A unfused tap-off units Pre-wired tap-off units to pick up required circuit, colour coded grey Length Fixed Weight (m) polarity (kg) (1) 1 DDM408L1C DDM42L1C DDM43L1C 3 L1 + N DDM45L1C DDM408L2C DDM42L2C DDM43L2C 3 L2 + N DDM45L2C DDM408L3C DDM42L3C DDM43L3C 3 L3 + N DDM45L3C A fused tap-off units Pre-wired tap-off units to pick up required circuit, supplied with BS 1362 fuse, colour coded grey, can plug into any Electrak 33 tap-off outlet Length Fixed Weight (m) polarity (kg) (1) 1 DDM408L1FC DDM42L1FC DDM43L1FC 3 L1 + N DDM45L1FC DDM408L2FC DDM42L2FC DDM43L2FC 3 L2 + N DDM45L2FC DDM408L3FC DDM42L3FC DDM43L3FC 3 L3 + N DDM45L3FC (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating and tap-off type is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 C = Tap-off with communications circuit. For power only, remove the C 35

36 Electrak 33 4P + E (3 phase) buscom trunking power and communication distribution DDN4L1F DDR43 Selection chart (p ) Dimensions and technical information (p ) Integral communication bus suitable for KNX, Lonworks, DALI protocols, etc. 25 A and 40 A systems Outlets on one or two sides. IP 4X or IP 54 ingress protection Fast installation (trunking push fits together in seconds). High quality materials. Suspended or surface mounted Pack Cat. Nos. Tap-off units without comms rewirable 16 A unfused tap-off units Rewirable tap-off units to pick up required circuit, colour coded grey, can plug into any Electrak 33 tap-off outlet Fixed Weight polarity (kg) (1) 1 DDN4L1 L1 + N DDN4L2 L2 + N DDN4L3 L3 + N A fused tap-off units Rewirable tap-off units to pick up required circuit, supplied with BS 1362 fuse, colour coded grey, can plug into any Electrak 33 tap-off outlet Fixed Weight polarity (kg) (1) 1 DDN4L1F L1 + N DDN4L2F L2 + N DDN4L3F L3 + N 0 14 Pack Cat. Nos. Tap-off units without comms 4P + E pre-wired (LSOH 5 x 1 5 mm 2 cable) 16 A unfused tap-off units Pre-wired tap-off units to pick up required circuit, colour coded grey, can plug into any Electrak 33 tap-off outlet Length Fixed Weight (m) polarity (kg) (1) 1 DDR L + L + L + N DDR42 2 L + L + L + N DDR43 3 L + L + L + N DDR45 5 L + L + L + N 0 63 Phase selectable tap-off units without comms 2P + E terminals rewirable 16 A unfused tap-off unit Rewirable tap-off units, phase selectable, colour coded grey, can plug into any Electrak 33 tap-off outlet Fixed Weight polarity (kg) (1) 1 DDP4S L + N A fused tap-off unit Rewirable tap-off units, phase selectable, supplied with BS 1362 fuse, colour coded grey, can plug into any Electrak 33 tap-off outlet Fixed Weight polarity (kg) (1) 1 DDP4SF L + N 0 14 (1) Weights shown are for IP 4X rated buscom. For all other weights, contact us on +44 (0) Key : How to select the correct components All examples on this page show IP 4X buscom trunking IP rating is dictated by the red letters 4 = IP 4X. For IP 54 version, replace 4 with 5 36

37 Electrak buscom trunking fixings and ancillary items EEA304 EEC348 EEC356 EEB340 EEB344 EEA308 EEA312 EEA328 EEA332 EEA324 EEC352 EEC360 EEC364 Dimensions and technical information (p. 41) Brackets are manufactured from robust galvanised steel, ensuring that the entire installation can be expected to stand up to all normal site conditions Pack Cat. Nos. Fixings 1 EEA304 Trunking 57 mm edge surface mounting fixing bracket 1 EEA308 Trunking suspended fixing bracket 1 EEA312 Trunking suspended fixing bracket c/w cable duct stirrup. Used when running cable duct on top of buscom trunking 1 EEA324 Luminaire suspension fixing bracket 1 EEA328 Luminaire 45 mm edge suspension fixing bracket (clip on) 1 EEA332 Luminaire 57 mm edge suspension fixing bracket (clip on) 1 EEB340 Open hook luminaire suspended bracket 1 EEB344 Closed ring on luminaire 1 EEC348 Cable duct 3 m long x 50 mm(w) x 13 mm(h) 1 EEC357 Joint bracket cable duct 1 EEC352 Cable duct fixing bracket Pack Cat. Nos. Ancillary items 1 EEC356 2 m empty length for adjusting the length at the end of a run (to be cut) 1 EEC360 IP 54 outlet cover (spare or replacement) 1 EEC364 Joint sleeve is used if load is hung off trunking joint or near when joint is centre of a fixing span 1 EEC366 Left hand end stop spare 1 EEC368 Right hand end stop spare 37

38 Electrak buscom trunking technical information n Standards ASTA approved to BS EN and IEC Manufactured within an approved ISO 9001 : 2008 facility Assessed Quality Assurance Certificate No Electrak fully complies with the requirements of BS 7671 : 2008 (IEE Wiring Regulations) n Buscom trunking options L2 L3 L2 N2 L2 L L1 L1 L1 N N N1 N PE PE PE PE Electrak buscom trunking can be used with Electrak s cost effective lighting control system, Lightrak KNX, or any other systems using control protocols such as KNX, Lonworks, DALI, etc. Electrak s overhead trunking couples high quality engineering with rigidity of design, and provides power for a variety of applications including lighting, heating and ventilation. The robust easy fix modular system permits loads to be suspended directly from the trunking using Electrak s various fixing brackets Push fit connection keeps installation costs to a minimum Track lengths simply push fit together Communication bus Electrical test data 25 A 40 A UOM Derating factor for Electrak 32 single sided 0 8 Derating factor for Electrak 32 double sided Derating factor for Electrak 33 double sided 0 8 Rated operational voltage (Ue) 230/ /400 V± Rated insulation voltage (Ui) V± Frequency (f) 50/60 50/60 Hz Rated impulse withstand voltage KV Busbar resistance (R 20 ) mω/m Resistance (R 1 ) mω/m Impedance (Z 1 ) mω/m Reactance (X 1 ) mω/m Protective conductor mω/m Volt drops 25 A 40 A UOM Live and neutral : busbars mv/a/m (R 1 +R 2 ) Feed unit mv/a Tap-off 0 8 m mv/a Tap-off 2 0 m mv/a Flexible length assembly 0 5 m mv/a Flexible length assembly 2 m mv/a Earth fault loop 25 A 40 A UOM Impedance : busbar mω/m Earth housing mω/m Feed unit mω Tap-off 0 8m mω Tap-off 2 0m mω Flexible length assembly 0 5 m mv/a Flexible length assembly 2 m mv/a Rated conditional short-circuit current (Icc) KA Rated short time withstand current (Icw) at 1 sec KA Rated peak short-circuit current (Ipk) KA Ambient temperature C Mechanical data 25 A 40 A UOM n Feed units 25 A rated - max. conductor size 6 mm 2 40 A rated - max. conductor size 16 mm 2 Double sided trunking feed units have power cable terminals on both sides. IP 4X galvanised steel IP 54 ABS Number of conductors Busbar conductor cross sectional area mm 2 Cable terminal capacity mm 2 Cable terminal capacity bus mm 2 Tap-off cable 16 A mm 2 Tap-off cable 13 A fused mm 2 Tap-off entry mmø Feed unit entry holes power mmø Feed unit entry holes bus mmø IP rating (optional) 4 X (54) 4 X (54) Direct protection by enclosure. Indirect protection by protective circuit 2 pole + earth + comms Comms bus Max. conductor size 1 5 mm 2 Red + Black - 38