Electrak Lightrak KNX Proprietary lighting control

Size: px

Start display at page:

Download "Electrak Lightrak KNX Proprietary lighting control"

Julius Lesley Elliott
5 years ago
Views:

Electrak Lightrak KNX Proprietary lighting control Designed to work in any circuit configuration

48 LIGHTING CONTROL SYSTEMS Lightrak employs the tried and tested KNX (European Installation Bus)

It provides power distribution for lighting, fan coil units and other small power needs, whilst

1 Electrak Lightrak KNX Proprietary lighting control Designed to work in any circuit configuration alongside Electrak's 25 and 40 A buscom trunking with integral communications bus. 48 LIGHTING CONTROL SYSTEMS Lightrak employs the tried and tested KNX (European Installation Bus) protocol. It provides power distribution for lighting, fan coil units and other small power needs, whilst also offering signal bus distribution by means of its integral twisted pair communications control circuit. The system is suitable for both dimmable (1-10 V analogue and DSI) and non-dimmable applications. By employing the KNX protocol, Lightrak can be integrated seamlessly with other KNX building controls. High speed installation... control units clip on to busbar Simple plug-in connection for power and control

LIGHTING CONTROL UNITS All lighting control units are supplied

BUSCOM TRUNKING Modular power and data distribution that

TEST Simple plug-in key switch to enable testing of emergency

lighting is only on when needed TIMED EVENT CONTROLLER

savings MULTI-GANG SWITCHES 1, 2, 4 and 8 gang options connect

5 cable and RJ45 plugs SCENE SETTING SWITCH Connected directly

Presence detection and auto-switching Fast, easy installation.

systems FIND OUT MORE Buscom trunking See p.

2 LIGHTING CONTROL UNITS All lighting control units are supplied pre-programmed and simply plug into Electrak's buscom trunking BUSCOM TRUNKING Modular power and data distribution that couples high quality engineering with robust design EMERGENCY TEST Simple plug-in key switch to enable testing of emergency luminaires PRESENCE DETECTION Saves energy and ensures that lighting is only on when needed TIMED EVENT CONTROLLER Operates across building and is programmed to optimise energy savings MULTI-GANG SWITCHES 1, 2, 4 and 8 gang options connect directly to interface via Cat. 5 cable and RJ45 plugs SCENE SETTING SWITCH Connected directly into buscom trunking to activate pre-set lighting scenarios BENEFITS Labour efficient. Pre-wired and pre-commissioned Energy efficient. Presence detection and auto-switching Fast, easy installation. Clip on / plug in Interface with other building control systems FIND OUT MORE Buscom trunking See p. 50 KNX Association visit: Fully addressable. Switching, dimming, corridor hold Load shed and emergency lighting test facilities Comprehensive design and commissioning service 49

3 lighting control system Lighting control - -/- - unit - -/- - FFD054 Lighting control unit FFD / /---- Timed event controller FFA006 Dimensions and technical information (p ) Proprietory lighting control system to work alongside Electrak s 25 and 40 A buscom trunking with integral communications bus High speed installation. Lighting control units factory configured Covers all lighting control requirements. Uses European standard KNX open protocol and KNX/EIB ETS software (PC configurable) Interoperable with other KNX devices. Designed and manufactured in the UK from robust galvanised steel Pack Cat. Nos. System components 1 FFA001 Statutory warning plaque 1 FFA004 Timed event controller (flush) 1 FFA006 Timed event controller (surface) 1 FFA008 Powered line coupler 1 FFA010 Track power supply unit 1 FFA012 Line power supply 1 FFA014 Signal cable 100 m 1 FFA016 Eib to RS232 interface 1 FFA018 USB to KNX interface Lighting control units - 6 outputs (2 switching channels) Non-dimming units 1 FFD050 Track mounted (standard buscom) 1 FFD050B1 L1 Key 'B' track mounted (3 phase buscom) 1 FFD050B2 L2 Key 'B' track mounted (3 phase buscom) 1 FFD050B3 L3 Key 'B' track mounted (3 phase buscom) Dimming units (analogue 1-10 V) 1 FFD052 Track mounted (standard buscom) 1 FFD052B1 L1 Key 'B' track mounted (3 phase buscom) 1 FFD052B2 L2 Key 'B' track mounted (3 phase buscom) 1 FFD052B3 L3 Key 'B' track mounted (3 phase buscom) Pack Cat. Nos. Lighting control units - 9 outputs (fully addressable) Analogue dimming (1-10 V) 1 FFD054 Track mounted (standard buscom) 1 FFD054B1 L1 Key 'B' track mounted (3 phase buscom) 1 FFD054B2 L2 Key 'B' track mounted (3 phase buscom) 1 FFD054B3 L3 Key 'B' track mounted (3 phase buscom) 1 FFD055 Rewirable surface mounted Digital dimming (DSI) 1 FFD056 Track mounted (standard buscom) 1 FFD056B1 L1 Key 'B' track mounted (3 phase buscom) 1 FFD056B2 L2 Key 'B' track mounted (3 phase buscom) 1 FFD056B3 L3 Key 'B' track mounted (3 phase buscom) 1 FFD057 Rewirable surface mounted For Electrak buscom / busbar trunking See p

lighting control system Multi-gang - -/- - switch interface - -/- - FFB020 5 m CAT 5 lead -----/----- ----/---- Compact presence detector FFC047 1 gang key switch FFB032 FFF205 4 gang switch FFB022-4

4 lighting control system Multi-gang - -/- - switch interface - -/- - FFB020 5 m CAT 5 lead -----/ /---- Compact presence detector FFC047 1 gang key switch FFB032 FFF205 4 gang switch FFB m sub-cabling to luminaires FFE085 Dimensions and technical information (p ) Proprietory lighting control system to work alongside Electrak s 25 and 40 A buscom trunking with integral communications bus High speed installation. Lighting control units factory configured Covers all lighting control requirements. Uses European standard KNX open protocol and KNX/EIB ETS software (PC configurable) Interoperable with other KNX devices. Designed and manufactured in the UK from robust galvanised steel Pack Cat. Nos. Sub-cabling to luminaires Plugs (male) 1 FFE060 4 pole rewirable plug (male) 1 FFE080 6 pole rewirable plug (male) Leads (5 m LSOH) 1 FFE065 With 4 pole male plug to free end 3 core 1 FFE075 With 4 pole male plug to free end 4 core 1 FFE085 With 6 pole male plug to free end 5 core 1 FFE095 With 6 pole male plug to free end 6 core 1 FFE105 With 4 pole male plug to 4 pole female plug - 4 core 1 FFE115 With 6 pole male plug to 6 pole female plug - 6 core 1 FFE120 With 6 pole male plug to free end 3 core (no dimming) 1 FFE125 With 6 pole male plug to free end 4 core (no dimming) Pack Cat. Nos. Switching devices 1 FFC047 Compact presence detector Switches for 1 gang back box 1 FFB030 1 gang switch 1 FFB032 1 gang key switch 1 FFB033 1 gang key switch - surface (including back box) 1 FFB034 2 gang switch 1 FFB gang switch 1 FFB gang switch 1 FFB gang switch 1 FFB gang switch 1 FFB gang switch 1 FFB gang switch 1 FFB gang switch Switches for 2 gang back box Switches for 2 x 2 gang back box 1 FFB020 Multi-gang switch interface 1 FFC048 8 gang scene set switch Back boxes 1 FFB036 1 gang 1 FFB026 2 gang 1 FFB028 2 x 2 gang CAT 5 cabling to switching 1 FFF205 5 m CAT 5 lead plug to plug 1 FFF m CAT 5 lead plug to plug A dedicated Lightrak design, quotation and commissioning service is available to help you achieve the optimum use of the Lightrak system lightrak.uk@legrand.co.uk 73

5 technical information Technical specification Each line coupler can support 64 bus devices (lighting control units and multi-gang switch interface units) A maximum of 15 line couplers may be linked with a main bus line together to form an area; therefore an area can support up to 960 devices The system may be further expanded with the addition of a backbone bus line which would allow the linking together of 15 main bus lines via 15 line couplers, therefore any single system could support devices By utilising additional line couplers this total can exceed devices (for additional details, if required, please contact us on +44 (0) ) Within any bus line the following cable lengths are permitted : Power supply unit to bus device 350 m maximum Bus device to bus device 700 m maximum Total bus line length m maximum Minimum distance between 2 power supply units on one line is 200 m (1) Powered line coupler FFA V± : screw connection block Primary line : screw connection block Secondary line : screw connection block Dimensions : length 358 mm, width 200 mm, depth 75 mm Weight : approximately kg Supply voltage : 230V± 50/60Hz Protection (supply) : 13 A BS 1362 fused spur Internal protection : 6 3 A fuse to IEC127-2 Primary line load : 15 mw Secondary line load : 200 mw Secondary output voltage : 30Vdc +/- 2 V Secondary output current : 630 ma, EN 55022B Busbar trunking mounted power supply unit FFA V± : Electrak integrated plug Bus : Electrak integrated plug Dimensions : length 330 mm, width 110 mm, height 60 mm 9 mm Weight : approximately 1 90 kg Protection (supply) : 13 A BS 1362 fuse fitted in tap-off Internal protection : 6 3 A fuse to IEC Secondary output voltage : 30 Vdc +/- 2 V Secondary output current : 640 ma EMC complies with : EN :1997, EN 55022B Line power supply FFA V± : screw connection block Bus : screw connection block Dimensions : length 358 mm, width 110 mm, depth 75 mm Weight : approximately 1 95 kg Supply voltage : 230 V± 50/60Hz Protection (supply) : 13 A BS 362 fused spur Internal protection : 6 3 A fuse to IEC Secondary output voltage : 30 Vdc +/- 2 V Secondary output current : 640 ma, EN 55022B Lighting control unit FFD050 6 GST/4 providing 230 V± to luminaires Dimensions : length 291 mm, width 144 mm, height 53 mm plus 9 mm Weight : approximately 1 66kg Maximum load : 10 A BS 1362 fuse fitted in tap-off Lighting control unit - dimming FFD052 6 GST/6 providing 230 V± to luminaires 2 Dimming common white 3 Dimming red Dimensions : length 291 mm, width 144 mm, height 53 mm plus 9 mm Weight : approximately 1 66 kg Maximum load : 10 A BS 1362 fuse fitted in tap-off (1) Electrak manufacture a busbar trunking mounted power supply unit for this application 76

6 Lighting control unit analogue dimming FFD054/FFD056 9 GST/6 providing 230 V± to luminaires 2 Dimming common white 3 Dimming red Dimensions : length 377 mm, width 182 mm, depth 53 mm plus 9 mm Weight : approximately 1 75 kg Supply voltage : 230 V± 50/60Hz Maximum load : 10 A BS 1362 fuse fitted in tap-off Lighting control unit DSI dimming FFD055/FFD057 9 GST/6 providing 230 V± to luminaires 2 Dimming common white 3 Dimming red Dimensions : length 370 mm, width 250 mm, depth 55 mm plus 9 mm Weight : approximately 1 90 kg Maximum load : 10 A 4 gang switch FFB022-4 Housing : steel back box 132 mm x 72 mm minimum 48 mm deep Dimensions : length 125 mm, width 64 mm, height 41 mm Weight : approximately kg Supply voltage : 9 Vdc 8 gang switch FFB024-8 Housing : steel back box 136 mm x 136 mm minimum 52 mm deep Dimensions : length 127 mm, width 122 mm, height 41 mm Weight : approximately 1 30 kg Supply voltage : 9 Vdc Multi-gang switch interface FFB V± : Electrak integrated tap-off Bus : Electrak integrated tap-off Switch : CAT 5 lead (RJ45 to RJ45) Dimensions : length 126 mm, width 102 mm, height 46 mm plus 45 mm mounting bracket Weight : approximately 0 66 kg Protection : 3 A BS 1362 fuse fitted in tap-off Nominal load : 24 ma Maximum bus load : 12 ma EMC complies with : EN : 997 System topology schematic diagram Main line powered line coupler Backbone powered line coupler 1.0. Bus line (max. 64 LCU) Backbone power supply unit AREA 1 main bus line EIB standard bus cable interconnecting backbone powered line coupler Backbone bus line Bus line (max. 64 LCU) Repeater power line coupler (maximum) (maximum) EIB standard bus cable EIB standard bus cable interconnecting main line powered line coupler AREA 2 main bus line AREA 3 main bus line AREA 4 main bus line AREA 15 main bus line (maximum) 77

7 typical layout Example of ceiling layout for Lightrak KNX fully addressable system Layout key Electrical distribution board Lightrak buscom trunking Feed unit Lighting control unit Powered line coupler Power cable EIB Bus cable Luminaires Outputs 1 to 9 Emergency luminaires K Timed event controller 1/1 Lighting control unit number and position on trunking Multi-gang trunking interface 1 to 8 gang wall switch Emergency lighting key switch Presence detector Scene setting 3/1 1/1 Buscom Trunking Run 1 2/1 K 4G Plug in leads 3/2 1/2 2/2 Buscom Trunking Run 3 Plug in power leads Buscom Trunking Run 2 1/3 1G 2/3 3/3 3/4 1/4 2/4 4G 3/5 78

Lightrak... KNX lighting control system LIGHTRAK / SYSTEM GUIDE INCLUDING BUSCOM POWERED BY SPECIALISTS

Lightrak... KNX lighting control system LIGHTRAK / SYSTEM GUIDE INCLUDING BUSCOM POWERED BY SPECIALISTS Electrak... the specialist in power distribution throughout the workplace Electrak, part of the Legrand