Company Profile. The material in this document is subject to the Copyright of EQL International Marketing Pty Ltd

Transcription

1

2 Company Profile EQL comprises a group of companies including EQL Telecommunications, EQL Networks & Security, EQL Teleconnect and Exico Connectors all under the umbrella of the holding company EQL International Marketing Pty Ltd. The company commenced trading initially as EQL International Marketing in April 1994 and was later incorporated in October Located in the Minto industrial area, South West of Sydney, EQL s warehousing facility enables high stock holding to ensure short lead times from order to delivery as well as high service levels to be provided and maintained. EQL has formed exclusive strategic partnerships with its main suppliers and is committed to only supplying top quality, high reliability and high performance products at competitive prices. As part of this commitment, all products are subject to a stringent quality assurance program and are constantly under review for improvement in performance and price. The continued growth of the company is testimony to customer satisfaction as a direct result of the company s policy on customer focus, service, care, product quality, product support, extremely keen pricing and last but not least strong and growing distribution channels. EQL will support its distribution channels through targeted advertising and exhibitions, such as ASIAL Security, Cebit & Security in Government to promote its products and re-enforce its branding in the market place. Master Licence Number: EQL exports its products to many different regions around the world, including the United Kingdom, Europe, United Arab Emirates, Africa, Asia and North America. NOTE: The specifications provided in this catalogue are representative only and are subject to change without notice. EQL s Standard Terms & Conditions for sale apply to all products in this catalogue. Purchasers are asked to familiarise themselves with the Terms & Conditions. The material in this document is subject to the Copyright of EQL International Marketing Pty Ltd 2

3 Table of Contents CCTV 4 RJ45 Video Baluns 4 Quick Connect IDC & Easy Connect Video Baluns 5 Quad Video Baluns 6 CCTV Balun Panels 7 Power Through Video Baluns 7 PTZ Video Balun 9 Versatile Balun Hub 9 Active Video Baluns 10 Surge Protector 10 PS-2 Keyboard Mouse RJ45 Converter 10 Video Ground Loop Isolator 11 VGA Balun 11 IP SURVEILLANCE 12 IP Mega Pixel Cameras 12 Licence Plate Recognition Cameras 16 Open Platform NVRs 18 Aver Hybrid DVRs 18 Alnet Open Platform Software 19 POE INJECTORS & SWITCHES 20 PoE Extenders 20 PoE Injectors 21 PoE Switches 21 LAN SWITCHES 24 WIRELESS LAN & ACCESSORIES 25 INDUSTRIAL 26 Industrial Switches and PoE Switches 26 Industrial Media Converters and Injectors 27 MEDIA CONVERTERS 28 Ethernet Over Coax 28 PoE over Coax 29 Ethernet over VDSL2 30 Ethernet over Fibre 30 Serial Over Ethernet / Fibre 31 Media Chassis 31 SFP Modules & Accessories 31 Video Over Fibre 32 DIN Rail Power Supplies 32 Ethernet & CATV over a Single Coax Cable 33 Analogue & IP Cameras over a Single Coax Cable 33 2 Analogue Cameras over a Single Coax Cable 33 AUDIO VISUAL 34 Audio Visual Products 34 RF / CATV Baluns 35 TOOLS & ACCESSORIES 36 Termination Tools 36 CCTV Multifunction Testers 37 Coaxial Cables, Category 5e/6 and Multipair Cables 38 RJ45 Connectors and RJ45 Boots 38 BNC Patch Cables, Figure 8 Cable and Fibre Patch Cables 38 SHARPMARK CABLE LABELS 39 TELECOMMUNICATIONS 40 Coaxial Connectors & Adaptors 40 G703 Baluns 43 G703 Line Isolators 46 INDEX 47 3

4 Closed Circuit Video Baluns Application Traditionally, coaxial cables such as RG59 are used for connecting the CCTV video camera to the DVR but now it is possible, through use of EQL s Passive Video Balun (Coax to Cat 5e/6 Converter), to replace the more expensive coaxial cable with Cat 5e/6 cable for runs up to 400 metres with negligible signal degradation. EQL s single or quad CCTV baluns enable video signals to be interfaced to twisted pair cabling using modular RJ45 connectors or alternatively, for single baluns, insulation displacement connectors (IDC) to achieve quick and reliable connections. With much lower Cat 5e/6 cabling costs compared to coaxial cabling costs, savings of up to 15% for a single cable run and up to 70% for quad cable runs can be achieved. Typical applications are shown below. Coax Cable (e.g. RG59) Cat 5e/6 Cable DVR Balun Balun DVR Coax Cabling Method Cat 5e/6 Cabling Method Coax Cable <50m Cat 5e/6 Cable 305m Quad Balun P/N E10172 Quad Balun P/N E10172 DVR Cat 5e/6 Cabling Method for 4 Camera Application with Cat 5e/6 Backbone Cabling Specifications (for all single video baluns) Bandwidth: DC to 8MHz Insertion Loss: < 2 db to 8MHz Impedance: 75 ohm BNC, 100 ohm RJ45 Maximum Signal Voltage: 1.1 Vp-p Return Loss: > 15 db to 8 MHz Common Mode Rejection: > 40 8 MHz RJ45 Contacts: Gold, 50 micro inch Temperature Range: 0 to 55 o C operating, -22 to 80 o C Storage (95% RH) Casing: Fire Retardant Plastic ABS UL 94V-0 Maximum Distance: Colour: Up to 400 m Cat 5e/6 B&W: Up to 600 m Cat 5e/6 For optimum video performance over distance, use only quality branded Cat 5e/6 cables, correct jointing technique and high quality DVR. RJ45 Video Baluns BNC Male Standard Case Part No: E10184S # BNC Male Slim Case Part No: E10180R BNC Male Slim Case with 100mm mini coax Tail Part No: E10180T BNC Female Keystone Mount Part No: E10185S ** # E10184S is only compatible with itself and the Power through Balun range for video only BNC Female Slim Case Part No: E10185R F Type Male Slim Case Part No: E10190R ** E10185S can be used with E10185P for rack mounting (see page 7) 4

5 Quick Connect IDC Video Baluns Slim Casing Design with IDC Connection for fast termination without an impact tool. Simply place cable in IDC slot and press down on the toggle provided. IDC Cover Wire Slot Select Pair Insert Wires into Slots Click toggle down BNC Male Economy (100m) Quick Connect Part No: E10180EC BNC Male Quick Connect Part No: E10180C BNC Male (Dome Camera) Quick Connect Part No: E10180CD BNC Male 100mm Tail Quick Connect Part No: E10180TC ** E10185SC can be used with E10185P for rack mounting (see page 7) BNC Female Quick Connect Part No: E10185C BNC Female Keystone Mount Quick Connect Part No: E10185SC ** F Type Male Quick Connect Part No: E10190C Easy Connect Baluns This video balun will enable video signal to be interfaced using coaxial on one side to Cat 5e/6 twisted pair cabling on the other, using patented push terminal clamp design to achieve quick and reliable connections. Compatible with our entire video only balun range. Specifications are the same as standard video only balun range. BNC Male Easy Connect Part No: E10180V Rear View 5

6 Quad Video Baluns Quad Video Balun 4 BNC Female to 1 RJ45 Connect 4 CCTV cameras to one Cat 5e/6 cable Compatible with E10172B Part No: E10172 Quad Video Balun - Rack Mount 4 BNC Bulkhead Female to 1 RJ45 Mount 4 Baluns using our Quad Balun Panel (see page 7) to achieve 16 port passive rack mount unit. Part No: E10172B Specifications Bandwidth: DC to 8 MHz Insertion Loss: < 2 db to 8 MHz Impedance: 75 ohm Coaxial, 100 ohm RJ45 Maximum Signal Voltage: 1.1 Vp-p Return Loss: > 15 db to 8 MHz Cross Talk: > 50 db to 8 MHz Common Mode Rejection: > 40 8 MHz RJ45 Contacts: Gold, 50 micro inch RJ45 Pin Out: Port 1: 1(+), 2(-) / Port 2: 3(+), 6(-) / Port 3: 5(+), 4(-) / Port 4: 7(+), 8(-) Temperature Range: 0 o to +55 o C operating, 95% RH Casing: Fire Retardant Plastic ABS UL 94V-0 Maximum Distance: Colour: Up to 400m Cat 5e/6 / B&W: Up to 600m Cat 5e/6 Dimensions: 81 x 60 x 24 mm Quad Balun Application E10172PS Coax Cable <50m Cat 5e/6 Cable Quad RJ45 Adaptor Quad Adaptor RJ45 Splitter (Non Impedance Matching) Specifications: Part No: E10170 E10172 E10172B For multi-camera installations where one Cat 5e/6 cable is used as the backbone, the cable will need to be split to allow each of the cameras to be connected to the correct pair of Cat 5e/6 cable. The E10170 RJ45 Adaptor will facilitate quick and reliable connections to each video balun for an all Cat 5e/6 installation. As correct termination of Cat 5e/6 cable pairs is essential for the transmission of video through the cable, proper termination techniques such as using the E10170 RJ45 Adaptor will ensure good quality pictures from your CCTV installations. Bandwidth: DC to 20 MHz Insertion Loss: < 0.1 db to 8 MHz Impedance: 100 ohm RJ45 Contacts: Gold, 50 micro inch RJ45 Pinout: Jack 1: 4,5 to Common Jack 1,2 / Jack 2: 4,5 to Common Jack 3,6 Jack 3: 4,5 to Common Jack 5,4 / Jack 4: 4,5 to Common Jack 7,8 Compatibility: RJ45 Balun types: E10180R / E10180T / E10185S / E10185R DVR 6

7 Quad Adaptor Application Cat 5e/6 Cat 5e/6 E10170 E10172 Balun E10180R DVR CCTV Balun Panels Quad Balun Panel (No Designation Strip) Part No: E10172P Quad Balun Panels These 16 port rack panels are used in conjunction with the E10172B or E10174 to create professional rack mount solutions. Mount 4 E10172B Baluns to achieve 16 port passive rack mount unit. Each panel fits a standard 19 Rack and is finished in Black Powder coating. Available with or without a designation strip Quad Balun Panel (with Designation Strip) Part No: E10172PS Keystone Balun Panel (unloaded) Part No: E10185P Keystone Balun Hub Part No: E10185PL (RJ45 type) Part No: E10185PC (Quick Connect type) 16 Port BNC Female Patch Panel Part No: E40840PL-16 Keystone Balun Panel This 16 port keystone rack panel is used in conjunction with the E10185S or E10185SC to create professional rack mount solutions. Mount 16 Baluns to achieve a 16 port passive rack mount unit. Each panel fits a standard 19 Rack and is finished in Black colour and numerically labelled 1 to 16. Keystone Balun Hubs These 16 port Balun Hubs are complete solution panels that have been preloaded to save time on installation. Comes preloaded with either RJ45 Baluns or Quick Connect Baluns. Part No: E10185PL Part No: E10185PC (Preloaded Panel with RJ45 Baluns E10185S) (Preloaded Panel with Quick Connect Baluns E10185SC) BNC Female Patch Panel This 16 Port BNC Female patch Panel is preloaded with 16 BNC Female to BNC Female adaptors to facilitate a professional patching system in your 19 Rack. Power Through Video Baluns - Standard Series Allows Video + Power for cameras to be supplied via Cat 5e/6 cable. Maximum distance of video will depend on camera power consumption and environment. Specifications Video: Pin 7(+) / Pin 8(-) DC or AC Power Pins 1,3,5 (+) (Centre contact) / 2,4,6 (-) Power cable length 100 mm All other specifications are identical to Single Passive Balun range (see page 4) Compatible with: E10524 / E10524L / E10174 / E10700A Power Through Balun Application Power Power BNC Male with 2.1mm Plug Part No: E10184SP BNC Male with 2.1 mm Jack Part No: E10184SJ E10184SP E10184SJ DVR 7

8 Power Through Video Baluns - Pro Series This balun has been developed for the higher end market to provide greater interference immunity, using a special balun and incorporates an LED to indicate the presence of power. Power Power BNC Male to RJ45 Part No: E10524 (300mm Lead) E10524L (500mm Lead) E10524 E10524 DVR Specifications Bandwidth: DC to 8 MHz Insertion Loss: < 2 db to 8 MHz Impedance: 75 ohm BNC, 100 ohm RJ45 Maximum Signal Voltage: 1.1 Vp-p Return Loss: > 15 db to 8 MHz Common Mode Rejection: > 40 8 MHz Indicator LED: Red for AC or DC Power On Connectors: Video: BNC Male Power: Bare Fig 8 (Solid Red (+), Red/Black (-)) Cable Length: 300 mm (E10524) / 500 mm (E10524L) Pinout for RJ45 Jack: Video: 7(+) / 8(-) Power: 1,3,5 (+) / 2,4,6 (-) RJ45 Contacts: Gold, 50 micro inch Temperature Range: 0 to 55 o C operating, -22 to 80 o C Storage 95% Relative Humidity Casing: Fire Retardant plastic ABS UL 94V-0 Maximum distance: Video Only Colour: Up to 400 m B&W: Up to 600 m Video and Power: Up to 300 m Compatible with: E10184SP / E10184SJ / E10174 / E10524L / E10700A Note: These Baluns are not current limited. Therefore, wiring should be checked carefully before power up. Incorrect wiring may also damage the balun. Power Through Quad Balun Power is applied to each RJ45 jack from a common power supply via a 2 pole screw terminal connector. The pinout of each RJ45 connector has been standardised to allow the Quad Power Through Balun to interwork with our E10184SP, E10524 and E10524L baluns. Part No: E10174 Rear View Part No: E10174 Use with the E10172P or E10172PS panel to create a professional rack mount solution. The maximum distance between the camera and the E10174 at the hub end depends on the power requirements of the camera. Specifications: Bandwidth: DC to 8 MHz Impedance: 75 ohm BNC, 100 Ohm RJ45 Indicator LED: Red for AC or DC Power On Connectors: BNC: 4 x BNC Female Bulkhead RJ45 Jack: 4 x RJ45 Unshielded Jacks Pinout for RJ45 Jack: Video 7(+) / 8(-) Power 1, 3, 5 (+) / 2, 4, 6 (-) RJ45 Contacts: Gold 50 micro inch Temperature Range: 0 to 55 o C operating, -22 to 80 o C Storage 95% Relative Humidity Casing: Fire Retardant Plastic ABS UL 94V-0 Maximum Distance: Video Only Colour: Up to 400m Video and Power: Up to 300m Compatible with: Power Through Balun E10184SP, E10524 and E1524L at Camera end and E10172 Rack Panel Range for mounting up to 4 E10174 at the Hub end. 8

9 PTZ + Power Through Video Baluns This balun incorporates a PTZ function to allow transmission of RS485 protocol over the same Cat 5e/6 cable as video and power. The Video Balun used is identical to E10524, offering greater interference immunity, with this unit also incorporating an LED. Power Power E10522 Specifications: BNC Male to RJ45 Part No: E10522 All specifications are identical to E10524 except the following: Connectors: Video: BNC Male Power: Bare Fig 8 (Solid Red (+), Red/Black (-)) Data: Bare Fig 8 (White/Black (+), Black (-)) Pinout for RJ45 Jack: Video 7(+) / 8(-) Power 1,3 (+) / 2,6 (-) PTZ 4(+) / 5(-) Maximum distance: Video Only Colour: Up to 400 m Video and Power: Up to 200 m Video, Power + PTZ: Up to 70 m PTZ PTZ Control Panel E10522 PTZ DVR Note: For use with Internal Speed Domes with the maximum distance dependent on camera power and environment. To maximize distances, use a higher voltage power supply (e.g. 28 volts for 24 volt camera). Versatile Balun Hub Mounts in Standard 19 rack, 1 RU high. 16 Port Hub RJ45 Jack, BNC Female Switch selectable functions Part No: E10700A Each of the 16 ports is switch selectable for either Video + Power only or Video + Power + PTZ control operation. The RJ45 jacks are on one face of the panel and BNC female for video on the other. The L Brackets provided allow the user to choose which face is front and which is rear. Power & PTZ control using RS485 protocol are via screw terminals on the BNC face. Compatible with: Power Through Baluns E10524, E10524L and E10184SP / Power + PTZ Baluns E10522 / Video Only Balun E10184S. Specifications Bandwidth: DC to 8 MHz Impedance: 75 ohm BNC, Max 8 metres of Coax to DVR 100 ohm RJ45 Interface: 16 x BNC Female for Video / 16 x RJ45 Jack / 16 x 4 Pole Screw Terminal for Power / PTZ Control. RJ45 Pinout: Video 7(+) / 8(-) for video Power 1, 3, 5 (+) and 2, 4, 6 ( ) switch in power mode Power 1, 3 (+) and 2, 6 ( ) and PTZ control 4 (+) / 5 (-) switch in control mode Temperature Range: 0 to 55 o C operating, -22 to 80 o C Storage (95% Relative Humidity) Maximum Distance: Video Only Colour: Up to 400 m Video and Power: Up to 200 m Video Power and PTZ: Up to 70 m Note: Maximum distance is dependent on camera power and environment. E10524 Cat 5e/6 Cabling E10700A DVR Power supply 9

10 Active Baluns The Video Transmitter in conjunction with Video Receiver has been specifically designed to enable transmission of colour and monochrome video signals over long distances, using Category 5e/6 cable or a pair of UTP cabling forming part of the building cabling. The video signal is amplified and equalised to overcome losses through the Cat 5e/6 cable to provide a clear picture. Protection against voltage spikes is an added feature of the design. Range: 1500 metres Part No: E10600T (Transmitter) E10600R (Receiver) Range: 1800 metres Part No: E10610T (Transmitter) E10610R (Receiver) Specifications Bandwidth: DC to 8 MHz Impedance: BNC Female 75 ohm UTP 100 ohm Distance Setting (Transmitter): 3 Position: E10600T/R: >500m / 1km / <1.5km E10610T/R: >500m / 1km / <1.8km Controls (Receiver): Luma and Chroma Indicators: E10600T/R: Red (Power On) / Green (Video On) E10610T/R: Blue (Power On) / Green (Video On) Common Mode Rejection: > 40dB (E10600T/R) > 60dB (E10610T/R) Power Supply: 24VAC or DC 50mA (Not included) Can be shared with camera if floating Operating Temperature: 0 o to +50 o C RH 95% non condensing Case Dimensions: 50 x 40 x 27.5 mm Casing: Black ABS (Fire Retardant Plastic) Note: The Power supply used for the Active Transmitter and Active Receiver must be separate. Application Power Power E10600T E10600R Video Cat 5e/6 DVR Surge Protector The Surge Protector is used to protect sensitive equipment, such as cameras and DVR s, with different ground potential from power surges and lightning activity. The unit connects between the camera and connecting coaxial cable and is recommended for use where cameras are installed externally in open space that is vulnerable to lightning strikes. Designed to offer a combined surge capacity of 3000 watts and Impulse Discharge Current of 8*20 μ/s short wave and 10*1000 μ/s long wave. Part No: E10510F (Female to Male) PS-2 Keyboard Mouse RJ45 Converter The Keyboard / Mouse PS-2 Converter allows the connection of a standard PS-2 Keyboard and Mouse to a PC via Cat 5e/Cat 6 UTP cable. Used as a set, this converter can be used for distances up to 100m. For KVM applications, the PS-2 Converter can be used with the VGA Balun (P/N E10680CM) for distances up to 45m. Keyboard / Mouse PS-2 Converter Set Part No: E10800KMC 10

11 Video Ground Loop Isolator The Video Ground Loop Isolator has been specifically designed to provide a cost effective solution to a common CCTV problem of multiple ground paths or ground loops which results in a rolling hum bar or instability in the picture being captured. Where it has been established that multiple ground paths is the cause of the problem and not the result of the power supply being used or poor video signal, the EQL Video Ground Loop Isolator will eliminate multiple ground paths and hence hum bar and related symptoms, giving you a crisp, clear picture. An added feature of the Video Ground Loop Isolator is the incorporation of a Transient Voltage Suppressor to protect against surges. BNC Male to BNC Female (Camera End) Part No: E10500 BNC Female to BNC Male (DVR End) Part No: E10500D CCTV Image with Hum Bar Problem due to Multiple Ground Loops CCTV Image with Ground Loop Isolator to eliminate the Hum Bar Specifications Insertion Loss: < 0.5 db Frequency Range: 0 to 10 MHz (-3dB) Input Impedance: 75 Ohm Nominal Input Connector: BNC Male (E10500) ; BNC Female (E10500D) Output Connector: BNC Female (E10500) ; BNC Male (E10500D) Output Impedance: 75 Ohm Nominal Cable Length: 100 mm Isolation Voltage: 750 Volts DC Insulation Resistance: > 100 M Ohm Transient Voltage Suppression: 12 Volts rms Casing Material: Black ABS UL 94V-0 Casing Size (L x W x H): 50mm x 30mm x 25 mm VGA Balun Used together as a pair, the VGA Balun set allows VGA signal to be transmitted over a single Shielded Cat 5e/6 cable, up to approximately 70 metres from the source. Specifications Applications VGA Balun Set Part No: E10680CM Bandwidth: 0 to 60 MHz Maximum Video Input: 1.1 Vp-p Insertion Loss: < 3 db Impedance: 75 ohm RGB, 100 ohm RJ45 Video Return Loss: < -14 db over rated bandwidth Maximum distance: 70 metres VGA, 45 metres SXGA Resolution Supported: VGA (640 x 480) SVGA (800 x 600) XGA (1024 x 768) SXGA (1280 x 1024) Connector: DB15HD, RJ45 Jack Shielded Cable Length: 100 mm Casing Material: ABS UL 94V-0 Fire Retardant Plastic Casing Size: 50 x 43 x 21 mm PC E10680C Shielded Cat 5e/6 E10680M Connecting a remote CRT, LCD or Plasma monitor to a PC/Notebook for display purposes or a PC/Notebook to a projector for multimedia presentations. PC E10680C Shielded Cat 5e/6 E10680M Projector 11

12 Nexcom Technology True WDR Nexcom's True WDR (100db) IP Camera provides video quality similar to the human eye. It is well suited in high contrast environments in overcoming challenges in various lighting conditions such as lobby entrances, parking lots, ATM s and loading docks. Zoom Focus with P-Iris Zoom focus function allows users to remotely control focus & zoom to simplify installation and reduce labour costs. P-iris function works by a stepping motor, controlled via software, to automatically provide the best iris position for the best exposure time in all lighting conditions. 60 fps Nexcom supports high-performance H.264/MJPEG compression technology and offers extra smooth video at up to 60fps in 1080p, and 3 megapixels. It is ideal for capturing fast moving objects. Image Stabilisation Nexcom offers image stabilisation technology, which detects vertical / horizontal movements and utilises sophisticated algorithms to counter the unwanted movements. Ultra-Low Light Nexcom has the capability to enhance camera performance under extreme low lux environments, where light is the critical issue. This new technology allows Nexcom to stay in colour even in low light conditions. Nexcom Dome Cameras 2 & 3 Mega Pixel IR Outdoor Vandal Dome 1/3" CMOS progressive scan sensor Triple Streaming H.264(1) / H.264(2) / MJPEG(3) B/W 0 lux / Colour 0.1 lux VBR/CBR Motorised Lens (3-10mm, F1.4) 2MP 1920 x 30fps P-Iris 3MP 1920 x 60fps / 2048 x 30fps Built in IR Illuminator (25m range) IEEE 802.3af compliant / DC12V/AC 24V terminal block Smart IR -40 ~ 60 C (@ 90% RH - non-condensing) ICR 3 Piece Construction True WDR 100dB IK10 Vandal resistant 10/100/1000 Mbps Ethernet (RJ45) IP66, built-in heater Part No: NCo-x01-VHR Part No: NCo-201-VHR Part No: NCo-301-VHR 2 megapixel 3 megapixel 12

13 Nexcom Dome Cameras 2 & 3 Mega Pixel Mobile Mini Dome 1/3" CMOS progressive scan sensor Triple Streaming H.264(1) / H.264(2) / MJPEG(3) B/W 0.05 lux / Colour 0.1 lux VBR/CBR Fixed Lens (3.6mm, F1.8) (2.8mm opt) 2MP 1920 x 30fps Fixed Iris 3MP 1920 x 60fps / 2048 x 30fps ICR IEEE 802.3af compliant True WDR 100dB -40 ~ 60 C (@ 90% RH - non-condensing) Image Stabilisation IK10 Vandal resistant 10/100/1000 Mbps Ethernet (RJ45) IP67 Part No: NCm-x01-xV Part No: NCm-201-V 2 megapixel 3.6mm lens Part No: NCm-201-2V 2 megapixel 2.8mm lens Part No: NCm-301-V 3 megapixel 3.6mm lens Part No: NCm-301-2V 3 megapixel 2.8mm lens 2 & 3 Mega Pixel Varifocal Dome 1/3" CMOS progressive scan sensor DWDR B/W 0 lux / Colour 0.1 lux 10/100/1000 Mbps Ethernet (RJ45) Varifocal Lens (3-10mm, F1.3) Triple Streaming H.264(1) / H.264(2) / MJPEG(3) DC-Iris VBR/CBR Built in IR Illuminator (15m range) 2MP 1920 x 30fps Smart IR 3MP 1920 x 30fps / 2048 x 20fps ICR IEEE 802.3af compliant / DC12V terminal block 0 ~ 60 C (@ 90% RH - non-condensing) Part No: NCi-x11-R Part No: NCi-211-R Part No: NCi-311-R 2 megapixel 3 megapixel 2 & 3 Mega Pixel Discreet Dome 1/3" CMOS progressive scan sensor Triple Streaming H.264(1) / H.264(2) / MJPEG(3) B/W 0.05 lux / Colour 0.1 lux VBR/CBR Fixed Lens (3.6mm, F1.8) (2.8mm opt) 2MP 1920 x 30fps Fixed Iris 3MP 1920 x 30fps / 2048 x 20fps DWDR IEEE 802.3af compliant / DC12V terminal block 10/100/1000 Mbps Ethernet (RJ45) 0 ~ 60 C (@ 90% RH - non-condensing) Part No: NCi-x12 Part No: NCi-212 Part No: NCi megapixel 3 megapixel 3 Mega Pixel Vandal Dome 1/3" 3MP True WDR CMOS progressive scan sensor B/W 0.01 lux / Colour 0.1 lux Triple Streaming H.264(1) / H.264(2) / MJPEG(3) Motorised Lens (3-10mm, F1.4) VBR/CBR P-Iris 2048 x 30fps / 1920 x 60fps ICR IEEE 802.3af compliant / DC12V/AC 24V terminal block True WDR 100dB 0 ~ 60 C (@ 90% RH - non-condensing) 10/100/1000 Mbps Ethernet (RJ45) IK10 Vandal resistant Part No: NCi-301-V Part No: NCi-301-V 3 megapixel Nexcom 10 Megapixel IR Fisheye Camera Part No: NCf /2.3" 10MP CMOS progressive scan sensor B/W 0 lux / Colour 0.1 lux H.264 and MJPEG video compression Fixed Lens (1.5mm, F2.8) Dual Streaming Fixed Iris VBR/CBR Built in IR Illuminator (10m range) 3664 x 10fps / 3840 x 15fps Smart IR IEEE 802.3at compliant / DC12V/AC 24V terminal block ICR -20 ~ 60 C (@ 90% RH - non-condensing) DWDR 10/100/1000 Mbps Ethernet (RJ45) 13

14 Nexcom Box & Bullet Cameras 2 & 3 Mega Pixel Box 1/3" CMOS progressive scan sensor 10/100/1000 Mbps Ethernet (RJ45) B/W 0.01 lux / Colour 0.1 lux Triple Streaming H.264(1) / H.264(2) / MJPEG(3) CS Mount Lens VBR/CBR DC-Iris 2MP 1920 x 30fps ICR 3MP 1920 x 30fps / 2048 x 20fps DWDR IEEE 802.3af compliant / DC12V/AC 24V terminal block -20 ~ 60 C (@ 90% RH - non-condensing) Part No: NCb-x11 Part No: NCb-211 Part No: NCb megapixel 3 megapixel 3 Mega Pixel Box 1/3" 3MP True WDR CMOS progressive scan sensor B/W 0.01 lux / Colour 0.1 lux Triple Streaming H.264(1) / H.264(2) / MJPEG(3) Motorised Lens (3-10mm, F1.4) VBR/CBR P-Iris 2048 x 30fps / 1920 x 60fps ICR IEEE 802.3at compliant / DC12V/AC 24V terminal block True WDR 100dB -20 ~ 60 C (@ 90% RH - non-condensing) 10/100/1000 Mbps Ethernet (RJ45) Weather proof housing (optional) Part No: NCb Mega Pixel Bullet 1/3" 3MP True WDR CMOS progressive scan sensor B/W 0 lux / Colour 0.1 lux Triple Streaming H.264(1) / H.264(2) / MJPEG(3) Smart IR VBR/CBR ICR 2048 x 30fps / 1920 x 60fps True WDR 100dB IEEE 802.3at compliant / DC12V/AC 24V terminal block 10/100/1000 Mbps Ethernet (RJ45) -40 ~ 60 C (@ 90% RH - non-condensing) IP66 with built-in heater IK8 Vandal Resistant Anti Spider Buzzer Part No: Ncr-30x-VHR Part No: NCr-312-OVR Part No: NCr-302-VHR Motorised 3-10mm F1.4 lens P-Iris Built in IR Illuminator (25m) Part No: NCr-303-VHR Motorised 9-22mm F1.5 lens P-Iris Built in IR Illuminator (40m) Part No: NCr-304-VHR Varifocal 7-50mm F1.6 lens DC-Iris Built in IR Illuminator (70m) 3 Mega Pixel Bullet 1/3" 3MP True WDR CMOS progressive scan sensor B/W 0 lux / Colour 0.1 lux 10/100/1000 Mbps Ethernet (RJ45) Fixed Lens (3.6mm, F1.8) (4.2mm opt) Triple Streaming H.264(1) / H.264(2) / MJPEG(3) Fixed Iris VBR/CBR Built In IR Illuminator (25m range) 2048 x 20fps / 1920 x 30fps Smart IR IEEE 802.3af compliant ICR -20 ~ 60 C (@ 90% RH - non-condensing) DWDR IP67 Nexcom Ultra Low Light Cameras 2 Mega Pixel Ultra Low Light Box Sony 1/2" Exmor Image sensor H.264 and MJPEG video compression B/W lux / Colour 0.05 lux Triple Streaming H.264(1) / H.264(2) / MJPEG(3) CS Mount Lens VBR/CBR DC-Iris 1920 x 30fps ICR IEEE 802.3af compliant / DC12V/AC 24V terminal block DWDR -20 ~ 60 C (@ 90% RH - non-condensing) 10/100/1000 Mbps Ethernet (RJ45) Part No: NCb

15 Nexcom Ultra Low Light Cameras 2 Mega Pixel Ultra Low Light Varifocal Dome Sony 1/1.9" Exmor Image sensor 10/100/1000 Mbps Ethernet (RJ45) B/W 0 lux / Colour 0.05 lux H.264 and MJPEG video compression Varifocal Lens (4-9mm, F1.3) Triple Streaming H.264(1) / H.264(2) / MJPEG(3) P-Iris VBR/CBR Built-In IR Illuminator (15m range) 1920 x 30fps Smart IR IEEE 802.3af compliant / DC12V terminal block ICR -0 ~ 60 C (@ 90% RH - non-condensing) DWDR Part No: Nci-221-R Part No: NCo-221-VHR Part No: NCr-221-VHR 2 Mega Pixel Ultra Low Light Vandal Dome Sony 1/1.9" Exmor Image sensor B/W 0 lux / Colour 0.05 lux Motorised Lens (4-9mm, F1.3) P-Iris Built-In IR Illuminator (25m range) Smart IR ICR DWDR 2 Mega Pixel Ultra Low Light Bullet Sony 1/1.9" Exmor Image sensor B/W 0 lux / Colour 0.05 lux Motorised Lens (4-9mm, F1.3) P-Iris Built-In IR Illuminator (25m range) Smart IR ICR DWDR 10/100/1000 Mbps Ethernet (RJ45) H.264 and MJPEG video compression Triple Streaming H.264(1) / H.264(2) / MJPEG(3) VBR/CBR 1920 x 30fps IEEE 802.3at compliant / DC12V/AC 24V terminal block -40 ~ 60 C (@ 90% RH - non-condensing) IK10 Vandal Resistant IP66, built-in heater 10/100/1000 Mbps Ethernet (RJ45) H.264 and MJPEG video compression Triple Streaming H.264(1) / H.264(2) / MJPEG(3) VBR/CBR 2048 x 30fps / 1920 x 60fps IEEE 802.3at compliant / DC12V/AC 24V terminal block -40 ~ 60 C (@ 90% RH - non-condensing) IK8 Vandal Resistant IP66, built-in heater Nexcom Accessories Bracket Adaptor Plate Pendant Adaptor Plate Nexcom is compatible with the following NVR partners: 15

16 Nexcom Technology - License Plate Recognition Speeding Vehicles Compared with conventional cameras, Nexcom cameras are equipped with global shutter functionality which prevents distortion of images. The quickest 1/20000s shutter can capture the car license plate with car speeds up to 180 km/h. Headlight Suppression Equipped with the headlight suppression feature, Nexcom captures car plates clearly without being affected by strong headlights. AE Metering Users are able to adjust AE value in UI, which makes Nexcom cameras fit perfectly for various illumination environments. Reflective & Non-reflective Plates With advanced camera settings, the smart AE & exposure value adjustment, Nexcom is capable of capturing both non-reflective and reflective plates concurrently to save on camera quantity and costs. Smart Illumination Smart IR is superior to traditional IR by automatically adjusting IR output in response to the distance of the object in view. The closer the object, the dimmer the IR will be. This will avoid object overexposure commonly seen in cameras using traditional IR functions. Over exposure makes it almost impossible to accurately recognise human faces or vital characteristics. Multiple Lane High resolution Nexcom can capture a maximum of 3 lanes of images with clear quality. Global Shutter Compared with rolling shutter, global shutter can capture images of high speed moving objects without distortion, which provides better images for recognition functions. Schedule ICR Day/Night Switching Nexcom has the capability to enhance a cameras performance under extreme low lux environment, where light is the critical issue. This new technology allows Nexcom to stay in colour, even in low light conditions. 16

17 Nexcom Technology - License Plate Recognition Schedule Wide Dynamic Range True WDR is designed for challenging lighting conditions. It captures both dark & bright parts & combines the difference to generate a highly realistic image, preserving as much information as possible. True WDR helps provide video that is closer to the capabilities of the human eye & is largely applied in high contrast areas such as entrances, car parks, ATMs & loading areas. 3D DNR The latest 3D DNR technology deducts noise effectively under low-light environment, which can help not only to clear the image but also save the storage space of the NVR. Anti-Smear Prevents smear effect caused by headlight or strong light such as sunlight or street lamps. This is a commonly faced problem with normal CCD cameras. Without the Anti-Smear feature, smear effects might cause difficulties in proceeding recognition. Clear Image with Colour Filters The user can set RGB colour filters to get the image to be very clear, which provides the accurate information to the IVA for analysing and recognition. Water & Vandal proof With IP66 rated weatherproof protective casing, Nexcom can fit all kinds of environments. LPR Cameras Part No: NCb Mega Pixel LPR Box 2MP Global Shutter progressive scan CMOS sensor B/W lux / Colour 0.1 lux Triple Streaming H.264(1) / H.264(2) / MJPEG(3) CS/C mount VBR/CBR Day / Night all resolutions ICR IEEE 802.3af compliant / DC12V/AC 24V terminal block DWDR -40 ~ 60 C (@ 90% RH - non-condensing) 10/100/1000 Mbps Ethernet (RJ45) Weatherproof with optional housing Micro SD 2 Mega Pixel LPR Bullet 2MP Global Shutter progressive scan CMOS sensor B/W lux / Colour 0.1 lux Micro SD (M) Model 12-36mm (F2.8, DC Iris) Triple Streaming H.264(1) / H.264(2) / MJPEG(3) (L) Model 50mm (F2.5, DC Iris) VBR/CBR Day / Night all resolutions Built in IR Illuminator (M) 40m (L) 70m IEEE 802.3af compliant / DC12V/AC 24V terminal block Smart IR -40 ~ 60 C (@ 90% RH - non-condensing) ICR IK8 Vandal resistant DWDR IP66 Weatherproof 10/100/1000 Mbps Ethernet (RJ45) Part No: NCr-231-VHRx Part No: NCr-231-VHRM 12-36mm (F2.8) DC Iris 40m IR Range Part No: NCr-231-VHRL 50mm (F2.5) DC Iris 70m IR Range 17

18 Nexcom Open Platform NVR Series Part No: NViS-5604 Mini Tower NVR Support LGA1150 socket 4th Generation Intel Core i3/i5/i7 Processor 2 x DDR3 1066/1333 SODIMM sockets, up to 16GB 3 x COM Port 4 x 3.5 HDD (supports hot swappable) USB 1 x esata 1 x PCI expressx16 / 1 x mini-pcie HDMI / DP / DVI Display Port AC V Power 2 x 10/100/1000 Mbps Ethernet 0 ~ 50 C Operating Temp 200 x 303 x 250 mm (WxDxH) Part No: NViS-6220 Rackmount NVR Support Intel Core TM i3/i5/i7 Processor USB 4 x 240-pin DDR3 sockets, up to 16GB memory 1 x mpcie and 1 x PCIe expressx16 8 x 3.5 HDD drive bay (supports hot swappable) AC V Power HDMI / DVI or DVI / HDMI or VGA / HDMI Display Port 0 ~ 45 C Operating Temp 2 x 10/100/1000 Mbps Ethernet 437 x 648 x 89 mm (WxDxH) Desktop NVR with PoE 4 / 8 x 10/100 PoE, IEEE802.3af, 15.4W per port 1 x COM Port Intel Celeron Dual Core 4 USB 2 x 204 pin DDR3 SODIMM, up to 16GB memory 1 x mpcie 2 x 2.5 HDD drive bay DC24V Power HDMI Display Port 0 ~ 50 C Operating Temp 2 x 10/100/1000 Mbps Ethernet 310 x 195 x 44 mm (WxDxH) Part No: NViS-120x Part No: NViS-1204 Part No: NViS Port PoE 8 Port PoE Part No: NViS-3542Px Aver Hybrid DVRs Part No: EH100xH-4 Part No: EH1116H-4+ Mobile NVR with PoE 4 / 8 x 10/100 PoE, IEEE802.3af, 15.4W per port 2 x 10/100/1000 Mbps Ethernet Support Intel Core TM i7/i5 processor, up to 2.66GHz 4 x COM Port 2 x 204 pin DDR3 sockets, up to 4GB memory 6 USB 2 x 2.5 HDD drive bay (support 1 x hot swappable HDD) DC9-30V Power 2 x esata -5 ~ 55 C Operating Temp VGA / DVI-D Display Port MIL-STD-810F 514.5C-3 (SSD) 235 x 268 x 101 mm (WxDxH) Part No: NViS-3542P4 Part No: NViS-3542P8 4 Port PoE 8 Port PoE 4 Channel Embedded Hybrid DVR Embedded Linux operating system 4 / 8 channels (total) - 4/8 x BNC (analogue) / Max. 4 x IP (Total budget 8Mpx) H.264 Compression NTSC/PAL CIF: 120/100fps / Half D1: 120/200fps / D1: 60/50fps Supports 1 x SATA HDD and 1 x external e-sata HDD (up to 2TB) 1 x 10/100 Ethernet port 1 x e-sata, RS232 & RS485 Part No: EH1004H-4 Part No: EH1008H-4 4 channels (total) 8 channels (total) 16 Channel Embedded Hybrid DVR Embedded Linux operating system 16 channels (total) - 16 x BNC (analogue) / Max. 4 x IP (Total budget 8Mpx) H.264 Compression NTSC/PAL CIF: 480/400fps / Half D1: 240/200fps / D1: 120/100fps Supports 1 x SATA HDD and 1 x ext. e-sata HDD (up to 2TB) 1 x 10/100/1000 Ethernet port 1 x e-sata, RS232 & RS485 18

19 Aver Hybrid DVRs Part No: IWH-3216-TII Part No: IWH-5416-TII 16 Channel Touch Series Embedded Hybrid DVR Embedded Windows operating system 16 channels (total) - 16 x BNC (analogue) / 16 x IP (Total budget 42Mpx) H.264 Compression NTSC/PAL CIF: 480/400fps / Half D1: 480/400fps / D1: 240/200fps Supports up to 4 x SATA HDD (4 removable HDD trays) Supports 1 x external e-sata HDD or RAID 2 x 10/100/1000 Ethernet port 1 x e-sata, RS232 & RS Channel Touch Series Embedded Hybrid DVR Embedded Windows 7 (64-Bit) 16 channels (total) - 16 x BNC (analogue) / 16 x IP (Total budget 80Mpx) H.264 Compression NTSC/PAL CIF: 480/400fps / Half D1: 480/400fps / D1: 480/400fps Supports up to 6 x SATA HDD (6 removable HDD trays) Supports 1 x external e-sata HDD or RAID 2 x 10/100/1000 Ethernet port 1 x e-sata, RS232 & RS485 Alnet Software - Open Platform Network Video Surveillance System Developed to be implemented on installations consisting from four to hundreds of IP Cameras. Full scalability of the software allows users to fine-tune the size of the system to meet individual needs. Thanks to the open software architecture, the user is free to choose from nearly 1000 integrated IP cameras from all major manufacturers. The software has been developed and deployed for over many years and works on about 70,000 installations worldwide, which confirms the high reliability & functionality of this system. Hybrid solutions are useful in installations where an existing Analogue installation is present and camera expansions are based on IP. In such cases, the NetHybrid system is a very scalable and flexible solution which, at a low cost, allows the migration of analogue and IP Technologies in one system. NetHybrid HD is the newest innovation from Alnet Systems. This hybrid digital video recorder is designated to co-operate with standards for HDSDI cameras. This is the first solution of this type on the market allowing video recording from 3 different technologies (CCTV + IP + HDSDI) on one system. CMS Professional is an advanced client application that works in conjunction with NetStation & NetHybrid servers. The software provides the capability of remote monitoring both one location and larger systems consisting of several hundred servers, no matter the distance between them. Expanded support for 8 monitors makes the CMS application suitable for advanced monitoring stations in an inexpensive & fast installation. Each client application has the capability of recording video streams from Alnet servers, creating a redundant backup in case of server damage. Recorded streams can be easily accessed through the archive module, which contains all of the same functions that are available on the server. Alnet Systems CMS Mobile application, designed for mobile phones and PDA, is currently one of the most advanced solutions on the market. CMS Mobile allows remote access to NetStation / NetHybrid servers from almost everywhere on the planet. System Features: Up to 512 cameras Back-up function Up to 32 cameras on one server Powerful CMS client software Support for video analytics Multi-stream support Advanced motion detection Watermark Bookmark function Programmable alarm inputs & switches Advanced archive browser & SMS notifications PTZ control Recording & live playback of up to 32 audio channels Digital zoom Multi-monitor support Alarm inputs & outputs Support Multi-server connection Easy to use GUI Multi-level e-maps No server license Fees CMS and Mobile Application free of charge Client and Mobile application for Windows7, Windows mobile, SymbianOS, iphone, Blackberry & Android. 19

20 PoE Products PoE is becoming the technology of choice simply because of the ease and speed with which installations can be implemented, allowing both data & power to be carried on the one Cat 5e or 6 cable, minimising on installation costs. With our PoE product range complying with either IEEE 802.3af or at standards, Powered Devices such as IP cameras are automatically identified by the Power Sourcing Equipment (PSE) before power is applied, in a controlled manner, so any likelihood of damage to equipment is minimised. Using a centralised source of DC power to power the network means through use of a UPS, sensitive installations can be protected against power outages. PoE Extenders Complies with IEEE 802.3af / 802.3at Power over Ethernet Extends the range of PoE an additional 100 metres Forwards both Ethernet data and PoE power to remote devices Automatically detects and protects PoE equipment Multiple units, daisy-chain installation support No external power cable required for installation Compact size, Wall-Mountable design, Plug-and-Play Part No: POE-Ex01 Part No: POE-E101 Part No: POE-E W PoE Extender 30W PoE Extender Power PoE IP Camera PoE Extender PoE Extender Data to switch or HDVR/NVR 100m 100m 100m 4 Port PoE Extender PoE Injector Transmits both Ethernet data and in-line power to 4 remote devices 1 PoE Input port and 4 PoE output ports 52V DC, 25 Watt (max) PoE power output IEEE 802.3at/af PoE Standard compliant Extends Cat 5e cable installations beyond 100m No local power required Plug & Play - no software required Part No: POE-E174 Power PoE Cameras Data & Power POE-171 Ethernet Switch POE-E174 Industrial 2-Port PoE Extender Part No: IPOE-E202 1 x 10/100/1000Base-T Data + Power Input port 2 x 10/100/1000Base-T Data + Power Output ports Complies with IEEE 802.3af / 802.3at Power over Ethernet Max. Total PoE Budget up to 25 Watts Extends the range of PoE an additional 100 metres Forwards both Ethernet data and PoE power to remote devices -40 to 75 C operating temperature Weatherproof design, outdoor installation 20

21 PoE 15.4 Watt, 30 Watt & 60 Watt Power Injectors Part No: POE-15xx Single Port 15.4W Injector/Splitters Complies with IEEE 802.3af Power over Ethernet Interface RJ45 1 x Data + Power and 1 x Data Auto-detect of PoE IEEE 802.3af equipment Distance up to 100 metres Part No: POE-151 Injector 10/100Mbps Mid-span Part No: POE-151S Splitter 10/100Mbps Mid-span, allows for 5V/12V DC selection Part No: POE-152 Injector 10/100/1000Mbps End-span Part No: POE-152S Splitter 10/100/1000Mbps End-span, allows for 5V/12V DC selection Part No: POE-16x Part No: POE-171x Part No: xpoe-4xx Part No: xpoe-xx00g Single Port 30W End-Span Injector/Splitter Complies with IEEE 802.3af / 802.3at Power over Ethernet Interface RJ45 1 x Data + Power and 1 x Data Auto-detect of PoE IEEE 802.3af / IEEE 802.3at equipment Protects devices from being damaged by incorrect installation Data rate 10/100/1000Mbps, Distance up to 100 metres Part No: POE-161 Injector End-span Part No: POE-162S Splitter End-span, allows for 12V/24V DC selection Single Port 60W Ultra PoE Injector/Splitter Complies with IEEE 802.3af / 802.3at Power over Ethernet Interface RJ45 1 x Data + Power and 1 x Data Auto-detect of PoE IEEE 802.3af / IEEE 802.3at equipment Protects devices from being damaged by incorrect installation Data rate 10/100/1000Mbps, Distance up to 100 metres Part No: POE-171 Injector End-span Part No: POE-171S Splitter End-span, allows for 12V/9V or 24V DC selection 4-Port 15.4W / 30W PoE Injector Hub Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet Connects up to 4 x PoE Devices, up to 15.4W (POE-400) / 30W (HPOE-460) for each PoE port Interface RJ45 4 x Data + Power and 4 x Data Circuit Protection prevents power interference between ports Data rate 10/100Mbps (POE-400), 10/100/1000Mbps (HPOE-460) Distance up to 100 metres Part No: POE-400 Part No: HPOE Port / 24-Port 15.4W or 30W PoE Gigabit Injector Hub PoE power management and monitoring Circuit Protection prevents power interference between ports Data rate 10/100/1000Mbps, Distance up to 100 metres 19 rack mountable, 1RU High Part No: POE-1200G Part No: POE-2400G Part No: HPOE-1200G Part No: HPOE-2400G 15.4W 4-Port Injector Hub (65W Total Budget) 30W 4-Port Injector Hub (120W Total Budget) 12-Port 15.4W Injector Hub (190W Total Budget) 24-Port 15.4W Injector Hub (380W Total Budget) 12-Port 30W Injector Hub (340W Total Budget) 24-Port 30W Injector Hub (460W Total Budget) Fast Ethernet (10/100) PoE Switches Part No: FSD-804Px Part No: FSD-504HP 8-Port Switch with 4-Port 15.4W PoE Complies with IEEE 802.3af Power over Ethernet Connects up to 4 x PoE Devices, up to 15.4 Watts for each PoE port, 60W Total Budget Interface RJ45 4 x Data + Power and 4 x Data Auto detect PoE Powered Devices Circuit Protection prevents power interference between ports Data rate 10/100 Mbps Basic Management on FSD-804PS model 5-Port Switch with 4-Port 30W PoE Complies with IEEE 802.3af/at Power over Ethernet Connects up to 4 x PoE Devices, up to 30 Watts for each PoE port, 60W Total Budget Interface RJ45 4 x Data + Power and 4 x Data Auto detect PoE Powered Devices Circuit Protection prevents power interference between ports Data rate 10/100 Mbps 21

22 Fast Ethernet (10/100) PoE Switches Part No: FGSD-910P 9-Port Switch with 8-Port 15.4W PoE Complies with IEEE 802.3af Power over Ethernet Connects up to 8 x PoE Devices, up to 15.4 Watts for each PoE port, 130W Total Budget Interface RJ45 8 x Data + Power and 1 x Data Auto detect PoE Powered Devices Circuit Protection prevents power interference between ports Data rate: 10/100 Mbps on PoE ports 10/100/100Mbps port for uplink Desktop size / 19 rack mountable Part No: FGSD-1022P Part No: FGSD-1022HP Part No: FGSW-1828PS 10-Port Switch with 8-Port 15.4W PoE + 2 Shared SFP Complies with IEEE 802.3af/at Power over Ethernet Connects up to 8 x PoE Devices, up to 30 Watts for each PoE port, 150W Total Budget Interface RJ45 8 x Data + Power and 2 x Data + 2 combo SFP Auto detect PoE Powered Devices Circuit Protection prevents power interference between ports Data rate: 10/100 Mbps on PoE ports 10/100/1000 Mbps on 2 x Data / Combo SFP Desktop size / 19 rack mountable 10-Port Switch with 8-Port 30W PoE + 2 Shared SFP Complies with IEEE 802.3af Power over Ethernet Connects up to 8 x PoE Devices, up to 15.4 Watts for each PoE port, 180W Total Budget Interface RJ45 8 x Data + Power and 2 x Data + 2 combo SFP Auto detect PoE Powered Devices Circuit Protection prevents power interference between ports Data rate: 10/100 Mbps on PoE ports 10/100/1000 Mbps on 2 x Data / Combo SFP Desktop size / 19 rack mountable 18-Port Switch with 8-Port 15.4W PoE + 2 Shared SFP Complies with IEEE 802.3af Power over Ethernet Connects up to 16 x PoE Devices, up to 15.4 Watts for each PoE port, 110W Total Budget Interface RJ45 8 x Data + Power and 8 x Data + 2 combo SFP Auto detect PoE Powered Devices Circuit Protection prevents power interference between ports Data rate: 10/100 Mbps on PoE ports 10/100/1000 Mbps on 2 x Data / Combo SFP Desktop size / 19 rack mountable Gigabit (10/100/1000) PoE Switches Part No: GSD-804P 8-Port Switch with 4-Port 15.4W PoE Complies with IEEE 802.3af Power over Ethernet Connects up to 4 x PoE Devices, up to 15.4 Watts for each PoE port, 60W Total Budget Interface RJ45 4 x Data + Power and 4 x Data Auto detect PoE Powered Devices Circuit Protection prevents power interference between ports Data rate 10/100/1000 Mbps Desktop Size Part No: GSD-808HP GSD-802PS 8-Port Switch with 8-Port 30W PoE Complies with IEEE 802.3at Power over Ethernet Connects up to 8 x PoE Devices, up to 30 Watts for each PoE port, 130W Total Budget Interface RJ45 8 x Data + Power Auto detect PoE Powered Devices Circuit Protection prevents power interference between ports Data rate 10/100/1000 Mbps 8-Port Gigabit 15.4W PoE + 2 Shared SFP Web Smart Gigabit Switch Complies with IEEE 802.3af Power over Ethernet Connects up to 8 x PoE Devices, up to 15.4 Watts for each PoE port, 110W Total Interface RJ45 8 x Data + Power, 2 x mini-gbic/sfp slots Auto detect PoE Devices with circuit protection, PoE power management and monitoring Data rate 10/100/1000Mbps Desktop size / 19 rack mountable 22

23 Gigabit (10/100/1000) PoE Switches Part No: WGSD-10020HP Part No: WGSW-20160HP 10-Port Gigabit Web Smart Switch with 8-Ports 30W PoE + 2 Shared SFP Complies with IEEE 802.3af / 802.3at Power over Ethernet Connects up to 8 x PoE Devices, up to 30 Watts for each PoE port, 150W Total Interface RJ45 8 x Data + Power, 2 x mini-gbic/sfp slots Auto detect PoE Devices with circuit protection, PoE power management and monitoring Data rate 10/100/1000Mbps Desktop size / 19 rack mountable 20-Port Gigabit Switch with 16-Ports 30W PoE + 4 Shared SFP Complies with IEEE 802.3at / 802.3af Power over Ethernet Connects up to 16 x PoE Devices, up to 30 Watts for each PoE port, 230W Total Interface RJ45 16 x Data + Power, 4 x Data / 4 x mini-gbic/sfp slots Auto detect PoE Devices with circuit protection prevents power interference between ports PoE power management and monitoring Data rate 10/100/1000Mbps 19 rack mountable, 1RU High Part No: SGSW-24040P4 Part No: SGSW-24040HP Part No: WGSW-28040Px Part No: WGSW-28040HPx 24-Port Gigabit Switch with 24-Ports 15.4W PoE + 4 Shared SFP Managed Stackable Switch Complies with IEEE 802.3af Power over Ethernet Interface RJ45 24 x Data + Power, 4 x mini-gbic/sfp slots Connects up to 24 x PoE Devices, up to 15.4Watts for each PoE port, 380W Total Auto detect PoE Devices with circuit protection prevents power interference between ports PoE power management and monitoring Hardware stack up to 16 units and 384 Gigabit ports, Single IP address stack management 19 rack mountable, 1RU High 24-Port Gigabit Switch with 24-Ports 30W PoE + 4 Shared SFP Managed Stackable Switch Complies with IEEE 802.3af/at Power over Ethernet Interface RJ45 24 x Data + Power, 4 x mini-gbic/sfp slots Connects up to 24 x PoE Devices, up to 30Watts for each PoE port, 360W Total Auto detect PoE Devices with circuit protection prevents power interference between ports PoE power management and monitoring Hardware stack up to 16 units and 384 Gigabit ports, Single IP address stack management 19 rack mountable, 1RU High 28-Port Gigabit Switch with 24-Ports 15.4W PoE + 4 Shared SFP Complies with IEEE 802.3af Power over Ethernet Connects up to 24 x PoE Devices, up to 15.4 Watts for each PoE port, Total Budget - see below Interface RJ45 24 x Data + Power, 4 x Data / 4 x mini-gbic/sfp slots Auto detect PoE Devices with circuit protection prevents power interference between ports PoE power management and monitoring Data rate 10/100/1000Mbps 19 rack mountable, 1RU High Part No: WGSW-28040P Part No: WGSW-28040P4 190 Watts Total Budget 380 Watts Total Budget 28-Port Gigabit Switch with 24-Ports 30W PoE + 4 Shared SFP Complies with IEEE 802.3af Power over Ethernet Connects up to 24 x PoE Devices, up to 30 Watts for each PoE port, Total Budget - see below Interface RJ45 24 x Data + Power, 4 x Data / 4 x mini-gbic/sfp slots Auto detect PoE Devices with circuit protection prevents power interference between ports PoE power management and monitoring Data rate 10/100/1000Mbps 19 rack mountable, 1RU High Part No: WGSW-28040HP 220 Watts Total Budget Part No: WGSW-28040HP4 440 Watts Total Budget 23

24 Gigabit (10/100/1000) PoE Switches Part No: WGSW-48040HP Network & Fibre Switches Part No: GSD-x03xx Part No: GSW-xx01 Part No: GSW-xx0xSF Part No: SGSW Port Gigabit Switch with 48-Ports 30W PoE + 4 Shared SFP Complies with IEEE 802.3af/at Power over Ethernet Connects up to 48 x PoE Devices, up to 30 Watts for each PoE port, 600W Total Interface RJ45 48 x Data + Power, 4 x mini-gbic/sfp slots Auto detect PoE Devices with circuit protection prevents power interference between ports PoE power management and monitoring Data rate 10/100/1000Mbps 19 rack mountable, 1RU High 5-Port / 8-Port Gigabit Desktop Switch Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab Interface RJ45 Data Ports, Data rate 10/100/1000Mbps Auto MDI/MDIX on each port Green Networking Technology for Energy Saving Compact size, wall mountable design Part No: GSD Port Switch Part No: GSD Port Switch Part No: GSD-803PD 8-Port PoE Powered Switch 16-Port / 24-Port Gigabit Switch Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab Interface RJ45 Data Ports, Data rate 10/100/1000Mbps Automatic MDI/MDIX on each port Automatic address learning and ageing 19 rack mountable, 1RU High Part No: GSW-1601 Part No: GSW Port Switch 24-Port Switch 16-Port / 24-Port Gigabit Switch with SFP Interface RJ45 Data Ports, Data rate 10/100/1000Mbps with mini-gbic/sfp slots Ingress rate limit and egress shaping for bandwidth control Automatic MDI/MDIX on each port Cable Diagnostic technology on copper links 19 rack mountable, 1RU High Part No: GSW-1602SF Part No: GSW-2404SF 16-Port Switch with 2 x mini-gbic/sfp slots 24-Port Switch with 4 x mini-gbic/sfp slots 24-Port Gigabit Stackable Switch Interface RJ45 24 x Data Ports, Data rate 10/100/1000Mbps 4 x 100/1000Base-x mini-gbic/sfp slots Hardware stack up to 16 units and 384 Gigabit ports Single IP address stack management Automatic MDI/MDIX on each port Automatic address learning and ageing HDMI like 5Gbps stacking interfaces 19 rack mountable, 1RU High Part No: SGSW Port Fibre Stackable Switch with 8-Port Gb Ethernet 24 Gigabit mini-gbic/sfp slots 8 x RJ45 10/100/1000Mbps Ethernet Ports Hardware stack up to 16 units and 384 Gigabit ports Single IP address stack management HDMI like 5Gbps stacking interfaces 19 rack mountable, 1RU High 24-Port 100/1000Base-X SFP with 4-Port 10G SFP+ L2/L4 Managed Metro Ethernet Switch Part No: MGSW-28240F 24 x 100/1000Base-X SFP mini-gbic + 4 shared 10/100/1000Base-T RJ x 1G/10G SFP+ Jumbo frame up to 9KB 16K MAC Address entries 19 rack mountable, 1RU High 24

25 Wireless LAN Part No: WNAP-C3220 Part No: WDAP-C7400 Part No: WNAP n Wireless Ceiling Mount Access Point / Range Extender Sleek Stylish and ceiling mountable design IEEE n, b/g standard compliant Up to 300Mbps High Speed Wireless data rate Multiple operating modes: AP/Repeater/WDS Ptp/WDS PtMP 64/128 Bit WEP, WPA/WPA2-PSK & WPA/WPA2-RADIUS 10/100/1000Mbps LAN Port with IEEE 802.3af PoE Compliance User friendly web and SNMP management interfaces a/n/b/g Dual Band Ceiling Mount Wireless Access Point Sleek Stylish and ceiling mountable design IEEE a/b/g/n standard compliant Up to 900Mbps High Speed Wireless data rate Max. Wireless speed up to Mbps 2.4G & 5G simultaneous dual band wireless connectivity 10/100/1000Mbps LAN Port IEEE 802.3at PoE Compliant n/b/g Wireless LAN Outdoor Access Point IP55 protection against rigorous weather conditions n technology for up to 150Mbps wireless connection Built in 12dBi patch Antenna with optional RP-SMA Type connector Multiple operating modes: Gateway, Bridge, WISP Multiple Wireless Access Modes: AP, Client WDS, Repeater Supports WEP, WPA, WPA2, 802.1x Authentication Reset to default button on PoE Injector High transmission output power up to 600mW n/b/g Wireless LAN Outdoor Access Point IP65 protection against rigorous weather conditions n technology for up to 150Mbps wireless connection Built in N-type (M) Antenna Connector Multiple operating modes: Gateway, Bridge, WISP Multiple Wireless Access Modes: AP, Client WDS, Repeater Supports WEP, WPA, WPA2, 802.1x Authentication High transmission output power up to 200mW Part No: WNAP-6308 Part No: WNAP n/b/g Wireless LAN Outdoor Access Point IP67 protection against rigorous weather conditions n technology for up to 300Mbps wireless connection 2T2R 300Mbps 2 x Built in N-type (F) Antenna Connector IEEE 802.3af PoE Compliant Multiple operating modes: Gateway, Bridge, WISP Multiple Wireless Access Modes: AP, Client WDS, Repeater Supports WEP, WPA, WPA2, 802.1x Authentication High transmission output power up to 500mW Wireless Antennas 2.4G 8dBi Omni Directional Antenna Part No: ANT-OM8 2.4G 18dBi Flat Panel Directional Antenna Part No: ANT-FP18 2.4G 20dBi Yagi Directional Antenna Part No: ANT-YG20 2.4G 21dBi Grid Directional Antenna Part No: ANT-GR21 25

26 Industrial Switches and Power over Ethernet Part No: IGS-x01T Part No: ISW-504PT Part No: ISW-1022MPT Part No: IGS-802T 5-Port / 8-Port Gigabit Industrial Switch Slim type, compact housing design, space saving and easy installation 12V-48VDC Redundant Power Design with polarity reverse protection -40 to 75 C operating temperature IP-30 Rugged Metal Case Protection DIN Rail and Wall-mountable Design Part No: IGS-501T Part No: IGS-801T 5-Port Switch 8-Port Switch 5-Port Fast Ethernet Industrial Switch with 4-Port PoE Injector Complies with IEEE 802.3af Power over Ethernet Connects up to 4 x PoE Devices, up to 15.4 Watts for each PoE port 24V or 48V Redundant Power Design with polarity reverse protection -40 to 75 C operating temperature IP-30 Rugged Metal Case Protection DIN Rail and Wall-mountable Design 8-Port Managed Industrial 15.4W PoE Gigabit Switch Complies with IEEE 802.3af Power over Ethernet Connects up to 8 x PoE Devices, up to 15.4 Watts for each PoE port PoE power management and monitoring Interface RJ45 8 x Data + Power, 2 x mini-gbic/sfp slots, 1 x RJ45 console interface Redundant Power Design with polarity reverse protection Quick recovery time < 20ms -40 to 75 C operating temperature IP-30 Rugged Metal Case Protection DIN Rail and Wall-mountable Design 8-Port Industrial Gigabit Switch with 2 SFP Interface RJ45 8 x Data, 2 x mini-gbic/sfp slots 12V-48VDC Redundant Power Design with polarity reverse protection -40 to 75 C operating temperature IP-30 Rugged Metal Case Protection DIN Rail and Wall-mountable Design Part No: ISW-804PT-M12 Part No: IGSW-24040T Industrial IP67 Rated Fast Ethernet PoE Switch Complies with IEEE 802.3af Power over Ethernet Connects up to 4 x PoE Devices, up to 15.4 Watts for each PoE port 48V DC Redundant Power Design with polarity reverse protection Industrial Protected IP67 Metal Case Robust M12 Ethernet Connector Waterproof/Dustproof -40 to 75 C Wide Temperature Support Free Fall, Shock, Vibration Industrial Stability 24-Port Industrial Gigabit Switch with 4 SFP 24 Port 10/100/1000Mbps with 4 x mini-gbic/sfp slots Industrial Managed Ethernet Switch IP-30 Metal Case, fanless design Redundant Dual 36V-72V DC or 100/240VAC -40 to 75 C operating temperature Layer 2/3/4 Access Control list and Port Security 19 rack mountable, 1RU High 300W Solar Powered PoE Switch 1 x 10/100/1000Mbps Ethernet Ports 2 x 10/100/1000Mbps 802.3at/af PoE Ports (60W max.) Powered via Solar or 24V battery -20 to 60 C operating temperature DIN Rail mountable Part No: BSP

27 Industrial Media Converters Part No: ICS-210x Industrial RS-232/RS-422/RS-485 over Ethernet / Fibre Cost effective for RS-232/ RS-422/ RS-485 to Ethernet application Standard TCP/IP interface and versatile operation modes Built-in IP-Based Web interface for remote management IP-30 Rugged Metal case protection, -10 to 60 C operating temperature 12 to 48V DC, redundant power with polarity reverse protect function Part No: ICS-2100 Part No: ICS-2102 Part No: ICS-2102S15 Ethernet 1 x SC / MM / 2KM 1 x SC / SM / 15KM Part No: IGT-90xx Part No: IVC-2002 Part No: IVC-2004PT Part No: IGTP-802T Part No: IPOE-162S Industrial Managed Gigabit Ethernet Media Converter Built-in IP-based Web interface and SNMP v1 / v2c for remote management TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test 12V to 48V DC, redundant power with polarity reverse protect function -30 to 75 C operating temperature IP-30 metal case / DIN-Rail and Wall-mountable design Part No: IGT-902T Part No: IGT-902TS Part No: IGT-905A 1 x SC / MM / 550m 1 x SC / SM / 10KM 1 x SFP Port / Distance varies on module Industrial 4-Port Ethernet Extender over Coax or UTP Cost Effective Fast Ethernet over coax or UTP solution Allows up to 4 Ethernet devices to be transmitted over a single coax (to 2.4km) or UTP (to 1.4km) One box design, Master/Slave selectable via DIP Switch 24V to 48V DC, redundant power with polarity reverse protect function Max speed 100/65 to 31/4Mbps (Coax) or 99/63 to 28/2Mbps (Telephone wire) -40 to 75 C operating temperature IP-30 metal case / DIN-Rail and Wall-mountable design Compatible with VC-202A and VC-201 Industrial 4-Port Ethernet Extender (with PoE) over Coax or UTP Cost Effective Fast Ethernet over coax or UTP solution Allows up to 4 Ethernet devices to be transmitted over a single coax (to 2.4km) or UTP (to 1.4km) 15.4W Full power injected by each PoE port One box design, Master/Slave selectable via DIP Switch 48V DC, redundant power with polarity reverse protect function Max speed 100/65 to 31/4Mbps (Coax) or 99/63 to 28/2Mbps (Telephone wire) -40 to 75 C operating temperature IP-30 metal case / DIN-Rail and Wall-mountable design Compatible with VC-202A and VC-201 Industrial Fibre to Ethernet 30W PoE Media Converter Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet Supply 30W over UTP 12V to 48V DC, redundant power with polarity reverse protect function -40 to 75 C operating temperature IP-30 metal case / DIN-Rail and Wall-mountable design Free Fall, Shock, Vibration Industrial Stability Part No: IGTP-802T 1 x SC / MM / 550m Industrial 30W High Power Ethernet Splitter Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet Auto detect of PoE device, protects from being damaged by incorrect installation LED indicator power input indication Distance up to 100m Interface RJ45 1 x Data + Power and 1 x Data 12V / 24V DC Power Output by DIP Switch -40 to 75 C operating temperature IP-30 metal case / DIN-Rail and Wall-mountable design Free Fall, Shock, Vibration Industrial Stability 27

28 Media Converters Our comprehensive selection of Media Converters offers the systems integrator a wide range of options for media conversion between a number of signal types and Cat 5e/6, Coaxial and Fibre transmission medium. Ethernet Over Coaxial Converters Part No: IPC-7100 Part No: IPC-7400 Part No: IPC-7110 The IPC-7xxx Series of Ethernet over Coax Converters are a new generation device that makes installation of powered devices such as IP cameras and other IP devices an easy task with no IP address and network set up required for the installation. Configuration can either be 1:1 or any combination up 1:4 with range up to 220 metres depending on power demand and type of coaxial cable used. Available in a variety of combinations, there is a solution for your application. Features and Benefits Use existing coax cables for IP camera and other devices to speed up installation and save on labour cost Easy to install no IP and MAC address configuration required Range up to 220 metres* (subject to product choice) Full Duplex 10/100 Mbps Data Speed Fully transparent to the network Built-in Video/Power surge protection Part No: IPC-7100 Part No: IPC-7110 Part No: IPC-7400 Part No: IPC-7100-KIT Part No: IPC-7110-KIT Part No: IPC-7404-KIT Single Passive EoC Converter Single DC Power EoC Converter 4 Port Passive EoC Converter 2 x IPC x IPC x IPC x IPC x IPC-7400 Applications Cat 5e Coax Cat 5e IP Camera IPC-7100 IPC-7100 Ethernet Switch Cat 5e Coax Cat 5e IP Cameras IPC-7100 IPC-7400 Ethernet Switch DC Power IP Camera Cat 5e Coax Cat 5e 28 IPC-7100 IPC-7110 Ethernet Switch

29 Ethernet Over Coaxial Cable (Active) Part No: VC-202A One box design, mode selectable via DIP Switch Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards Interface 1 x RJ45 and 1 x BNC Female Connector 75 ohm RG59 and RG6 or equivalent compatible Maximum distance = 1600m Maximum speed = 100/60 Mbps Plug and Play Easy Installation Compact size, standalone or use with MC-700 / MC-1500 chassis Ethernet Switch HDVR/NVR IP Cameras VC-202A MC700 with 4 x VC-202A Cat 5e Coax PoE Over Coaxial Cable or Twisted Pair (DC or PoE Powered) Part No: VC-205-KIT Re-use existing coaxial cable for IP cameras Power over Coaxial cable up to 1km Power Input either via external DC plug or PoE Power Interface 1 x RJ45 and 1 x BNC Female Connector 75 ohm RG59 and RG6 or equivalent compatible Supports PoE power up to 30W (subject to distance) Maximum distance = 1000m (PoE 4W) Maximum speed = 90/ m Plug and Play Easy Installation Compact size DC Power PoE Cameras Cat 5e Coax Data & Power VC-205PR VC-205PT Data Ethernet Switch Cat 5e Coax Cat 5e Data & Power Data & Power PoE Switch Cat 5e Data & Power UTP / 2-wire (using E180RS adaptors) Cat 5e Data & Power PoE Switch PoE Over Coaxial Cable (PoE Powered) By using novel RF technology, these PoE Extenders over Coaxial Cable allow the transmission of Power and 100Mbps Ethernet data up to 200 metres of coaxial cable. Complies with IEEE 802.3af standard Data Speed: 10/100 Mbps, Full duplex Distance: Up to 300m (200m coaxial + 100m Cat5e) Power Consumption: Tx: <1W / Rx: <2.5W Part No: POE-EC100-KIT 15.4 Watt (Standard) Coax Interface: BNC Part No: POE-EC130-KIT 30 Watt (High Power) Coax Interface: F-Type PoE Camera Data & Power EC-100R Coax EC-100T Data & Power PoE Switch 29

30 PoE Over Coax Media Converter Chassis The EC-800 Chassis has been designed to accommodate up to 8 POE- EC100 or EC130 Transmitter Units with the RJ45 ports front facing, in a 19 3RU slot. Part No: EC-800 Ethernet Over Twisted Pair VDSL2 The VC-231, using VDSL2 technology, offers the absolute fastest data transmission speed over existing copper networks (UTP & telephone lines) without the need for rewiring. It supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. The individual converters can be powered by the supplied power adapter or the in-built power supply of the media converter chassis. Part No: VC-231 ITU-T G VDSL2 (Profile 17a / 30a) One RJ-11 connector for VDSL2 connection CO-CPE mode selectable via DIP switch Selectable target profile and SNR margin Up to 100/100Mbps bandwidth Extensive LED indicators for network diagnostics Maximum phone wire distance up to 1.4km Compact size, standalone or rack mount with MC-700 / MC-1500 family media chassis 10/100/1000Mbps Ethernet over Fibre Converter The GT-80x Fibre Converter extends the reach of 10/100/1000 Mbps Ethernet IP networks over longer distances up to 20 km using Single Mode, or for shorter range, Multi-Mode cable options. Both the Ethernet and Optical Fibre interfaces operates at the current maximum speed of 1000 Mbps. The individual converters can be powered by the supplied power adapter or the in-built power supply of the media converter chassis. Part No: GT-80x Auto-negotiation, Auto MDI/MDI-X on TP port LED indicators for status monitor Various optional fibre connectors on different models OAM Terminal (TS-1000 and IEEE 802.3ah) supported Link Fault Pass (LFP) support Compact size, standalone or rack mount with MC-700 / MC-1500 family Media chassis The Ethernet over Fibre Converters come in a number of configurations and offer the systems integrator with diverse options for arriving at an optimum cost effective solution: GT-802 GT-802S GT-805A GTP Base-T to 1000Base-SX (SC, MM) Gigabit Ethernet Media Converter -220m/550m 1000Base-T to 1000Base-LX (SC, SM) Gigabit Ethernet Media Converter -10km 1000Base-T to 1000Base-LX/SX (mini-gbic/sfp) Media Converter - distance depends on SFP module 1000Base-T to 1000Base-SX (SC, MM) with PoE (Note: Not compatible with MC-700 / MC-1500R Chassis) 10/100Mbps Fast Ethernet over Fibre Converter Part No: FT-80x The FT-80x is Fast Ethernet Bridge 100Base-FX fibre to 10/100Base-TX Ethernet converter. It supports half-duplex and full-duplex operations and supports a variety of fibre options. The converter auto-adapts to the highest level of performance supported by the device connected to the UTP port. Auto-negotiation, Auto MDI/MDI-X on TP port LED indicators for status monitor Various optional fibre connectors on different models Rear DIP Switch for FX Duplex mode selection Side DIP Switch for LFP mode selection Compact size, standalone or work with MC-700 / MC-1500 family Media chassis The Ethernet over Fibre Converters come in a number of configurations and offer the systems integrator with diverse options for arriving at an optimum cost effective solution: FT-801 FT-802 FT-802S15 FTP /100Base-Tx to 100Base-Fx (ST, MM) Fast Ethernet Media Converter - 2km 10/100Base-Tx to 100Base-Fx (SC, MM) Fast Ethernet Media Converter - 2km 10/100Base-Tx to 100Base-Fx (SC, SM) Fast Ethernet Media Converter - 15km 10/100Base-Tx to 100Base-Fx (SC, MM) with PoE (Note: Not compatible with MC-700 / MC-1500R Chassis) 30

31 Serial over Ethernet / Fibre Converter These converters enable an easy and cost effective conversion of serial interfaces (RS-232 / 422 / 485) over Fast Ethernet wired networks or over multi-mode or single mode optical fibre with the desired distance selectable. Typical applications for these converters include access control and PTZ control. IP-Based Web interface for remote management Selectable Serial operation mode Virtual COM, TCP Server, TCP Client / UDP Client connections SMTP for alarm notification of events LED indicators for easy network diagnosis Supports standalone (Server Mode) or pair-operation (Converter Mode) Standalone, Wall or DIN-Rail mounting (Optional accessory) or Media Chassis (MC-700 / 1500) Part No: ICS-100 Serial over Wired Ethernet Part No: ICS-105A Serial over Fibre (SFP) Media Converter Chassis These Media Converter Chassis have been specifically designed to house a wide range of media converters and have an in-built power supply. An optional Redundant Power Supply (RPS) can be added to ensure high network availability. Hot-swappable feature on each slot LED indicators for system status monitor VC-2xx / VF-10x / ICS-10x / GT-80x / FT-80x compatible Redundant power supply support (MC-1500R) 10/19-inch rack mountable Part No: MC-700 Part No: MC-1500R 7 Port Media Converter Chassis 15 Port Media Converter Chassis Mini-GBIC/SFP Modules The MGB family consists of Small Form Factor Pluggable (SFP) transceiver modules that are specifically designed for high performance integrated duplex data links over multi-mode optic fibre for short range transmission up to 500m, or single-mode optical fibre for distances up to 120km. These transceiver modules are compliant with the SFP Multisource Agreement (MSA) and hot pluggable. They offer an easy way to be installed in SFP MSA compliant ports at any time without the interruption of the host equipment operation. Part Numbers: MGB-SX SFP-Port 1000Base-SX mini-gbic module - 550m MGB-SX2 SFP-Port 1000Base-SX mini-gbic module - 2km MGB-TSX SFP-Port 1000Base-SX mini-gbic module - 550m (-40~75 ) MGB-LX SFP-Port 1000Base-LX mini-gbic module - 10km MGB-TLX SFP-Port 1000Base-LX mini-gbic module - 10km (-40~75 ) MGB-L30 SFP-Port 1000Base-LX mini-gbic module - 30km MGB-L50 SFP-Port 1000Base-LX mini-gbic module - 50km MGB-L70 SFP-Port 1000Base-LX mini-gbic module - 70km MGB-L120 SFP-Port 1000Base-LX mini-gbic module - 120km Accessories Part No: ELA-100 Part No: POE-TESTER Ethernet Lightning/Surge Protector 20KA surge protection Two passive 10/100/1000Mbps Ethernet ports One ground position Flexibility for various Ethernet devices including PoE PoE Tester An easy-to-use PoE diagnostic adapter for network installers and even home users to quickly identify the existence of Power over Ethernet on applications / networks. It is designed to detect if the IEEE 802.3af/at PoE voltage runs over the UTP cable and identify the type of PSE (Power Source Equipment) for troubleshooting. 31

32 Video Over Fibre Media Converter Kit (Single Channel) The Video over Fibre media converter enables high quality transmission of analogue video and data over optical fibre cable up to 20Km by using leading edge intelligent encoding/decoding technology with a choice of Single Mode and Multi-Mode cable options. Video + Data over fibre transmission (ST/SC) 8 bit Video Signal digital sampling PAL, NTSC, SECAM compatible 20km maximum transmission distance High speed synchronous digital transmission Standalone or rack mount with MC-700/1500/1500R converter chassis Plug and Play, Easy Installation The Video over Fibre Converter Kit comes in a number of configurations and offers the systems integrator with diverse options for arriving at an optimum cost effective solution: Part No: VF-101-KIT Part No: VF-102-KIT Part No: VF-102SC-KIT Part No: VF-102S15-KIT 1-Channel Video over Fibre Bundle Kit (VF-101-T + VF-101-R / ST / MM / 2Km) 1-Channel Video over Fibre Bundle Kit (VF-102-T + VF-102-R / FC / SM / 20Km) 1-Channel Video over Fibre Bundle Kit (VF-102SC-T + VF-102SC-R / SC / MM / 2Km) 1-Channel Video over Fibre Bundle Kit (VF-102S15-T + VF-102S15-R / SC / SM / 15Km) Video Over Fibre Media Converter Kit (Multi-Channel) Features of Video Over Fibre Converters: Video and Data over fibre transmission 8 bit Video Signal digital sampling PAL, NTSC, SECAM compatible Maximum transmission distance: 2km Multi-Mode; 30km Single Mode Data Type: RS-485 High-Speed synchronous digital transmission technology Safe transmission guaranteed under poor electromagnetic environment Standalone or Rack Mount Compact size, easy installation 2-Ch with 1 Bi-directional Data Multi-Mode ST Part No: VF-2013M-KIT 4-Ch with 1 Bi-directional Data Multi-Mode ST Part No: VF-4013M-KIT 8-Ch with 1 Bi-directional Data Multi-Mode ST Part No: VF-8013M-KIT 16-Ch with 1 Bi-directional Data Multi-Mode ST Part No: VF-16013M-KIT Single-Mode ST Part No: VF-2013S-KIT Single-Mode ST Part No: VF-4013S-KIT Single-Mode ST Part No: VF-8013S-KIT Single-Mode ST Part No: VF-16013S-KIT 2-Ch with Return Data Multi-Mode ST Receiver Card Part No: VF-2012RM-C 4-Ch with Return Data Multi-Mode ST Receiver Card Part No: VF-4012RM-C 8-Ch with Return Data Multi-Mode ST Receiver Card Part No: VF-8012RM-C 14 Slot Card Cage for mounting card modules Part No: VF-6020-Cage DIN Rail Power Supplies Designed for industrial Ethernet devices in harsh working environments, the series includes DC single output industrial DIN rail power supply units which accept universal AC input voltage or DC input and provide 24V/48V DC power output with various watt values. With short circuit/overload/over voltage and over temperature protections for the stable operation of Industrial Ethernet equipment, they adopt the free air convection cooling system and are able to operate under the temperatures ranging from -25 to 70 degrees C (maximum). Part No: PWR W 24V DC Single Output Industrial DIN Rail Power Supply (-10 ~ 60 degrees C) Part No: PWR W 48V DC Single Output Industrial DIN Rail Power Supply (-10 ~ 60 degrees C) Part No: PWR W 48V DC Single Output Industrial DIN Rail Power Supply (-10 ~ 70 degrees C) Part No: PWR W 48V DC Single Output Industrial DIN Rail Power Supply (-25 ~ 70 degrees C) 32

33 Ethernet & CATV over a Single Coax Cable The IPC-2000-Kit comprises the Master Unit and Slave Unit and provides a cost effective solution for providing Ethernet over an existing CATV coaxial cabling system without re-cabling, By adopting innovative RF technology the range of these units is up to 1200 metres over coaxial cable. Part No: IPC-2000-T (Master) 10/100 Mbps full duplex data speeds Up to 50 Clients F-Connector CATV and CATV+EOC High Reliability Ruggedised Housing Wide Operating Temperature range HDVR/NVR Coax Power Cat 5e/6 IP Cameras Power Part No: IPC-2000-R (Slave) Part No: IPC-2000-KIT (Master + Slave) Master Slave CATV Out < 1200m Coax Splitter Distribution Amp Rear View Slave CATV Out Analogue & IP Cameras over a Single Coax Cable The IPC-2000C-Kit provides a cost effective solution for providing Ethernet and Analogue CCTV Video transmission simultaneously over an existing coaxial cabling system without re-cabling. By adopting innovative RF technology the range of these units is up to 120 metres depending on site conditions for Analogue Camera and 1200 metres for IP Camera. Part No: IPC-2000-T (Master) 10/100 Mbps full duplex data speeds F-Connector for Master/Slave Units and BNC/F for AV Taps High Reliability Ruggedised Housing Wide Operating Temperature range Fast and Easy to install Power HDVR/NVR Part No: IPC-2000-R (Slave) Part No: IPC-2000C-KIT (Master + Slave & 2x AV Tap) Part No: AV Tap Master IP Cameras Slave < 200m Coax AV Tap AV Tap Rear View DVR Coax Cat 5e/6 Power Analogue Camera 2 Analogue Cameras over a Single Coax Cable Designed to transmit 2 video signals & 2 alarm signals (from 2 cameras) down a single coaxial cable. Two video & two alarm signals Auto DC power supply system provides stable and sufficient 12VDC power to camera Transmission distances up to 800 metres with power to camera Part No: VDS

34 RGB Balun These RGB Baluns enable the transmission of one Red, Green and Blue video channel through twisted pair cabling. RGB Balun 3 RCA Female to 1 RJ45 Part No: E10640 When used in pairs, the baluns allow transmission of one Red, Green and Blue signal with synchronization on Green, through twisted pair cable, instead of composite RGB Coaxial cabling, thus offering the many benefits of Cat 5e/6 cabling. Specifications: Maximum Distance: Up to 100m Cat 5e (Colour) RJ45 Pin Configuration: Red (Pr): 7(+) / 8(-) Green (Y): 6(+) / 3(-) Blue (Pb): 2(+) / 1(-) HDTV Balun HDTV Balun 4 RCA to 1 RJ45 Part No: E10645 These HDTV Baluns enable 1 Component video signal (Y, Pb, Pr or RGB) and 1 Digital Audio signal to be interfaced using RCA Connectors to shielded twisted pair cabling to achieve quick and reliable connections of remote unit to the source. Used in pairs, the HDTV Baluns support 480i/p, 720p and 1080i/p video formats for high definition video applications. Specifications: Maximum Distance: 480i/p: Up to 250m Cat 5e 720p: Up to 100m Cat 5e 1080i/p: Up to 100m Cat 5e Audio: Up to 150m Cat 5e RJ45 Pin Configuration: Red (Pr): 7(+) / 8(-) Green (Y): 6(+) / 3(-) Blue (Pb): 2(+) / 1(-) Audio: 5(+) / 4(-) S-Video Balun The S-Video & Audio Balun allows these signals to be extended to a remote location using Cat 5e/Cat 6 UTP cables. S-Video & Audio Balun 2 RCA Female + 1 Mini Din to 1 RJ45 Part No: E10650 Audio & Video Balun This Balun provides a low cost & versatile cabling solution for any audio distribution. Examples include: DVD Players, VCR s, Projectors, Laptops etc. Specifications: Maximum Distance: Video: Up to 250m Cat 5e (Colour) Audio: Up to 1000m Cat 5e RJ45 Pin Configuration: S-Video (Lu): 7(+) / 8(-) S-Video (Ch): 5(+) / 4(-) Audio (White): 6(+) / 3(-) Audio (Red): 2(+) / 1(-) The Audio & Video Balun enables structured audio distribution of dual mono or single stereo audio & video signals via Cat 5e/Cat 6 UTP cable. Audio & Video Balun 3 RCA Female to 1 RJ45 Part No: E10655 This Balun provides a low cost and versatile cabling solution for audio & video distribution, for example, VCR output to TV or Projector. Specifications: Maximum Distance: Video: Up to 400m Cat 5e (Colour) Audio: Up to 1000m Cat 5e RJ45 Pin Configuration: Video (Yellow): 7(+) / 8(-) L Audio (White): 6(+) / 3(-) R Audio (Red): 2(+) / 1(-) Audio Balun The Audio Balun enables structured audio distribution of dual mono or single stereo audio signals via Cat 5e/Cat 6 UTP cable. Audio Balun 2 RCA Female to 1 RJ45 Part No: E10670 This Balun provides a low cost and versatile cabling solution for any audio distribution. Specifications: Maximum Distance: Up to 1000m Cat 5e RJ45 Pin Configuration: Left: 6(+) / 3(-) Right: 2(+) / 1(-) 34

35 RF / CATV Baluns F Female Keystone RJ45 Part No: E10980FK F Female Slim RJ45 Part No: E10980FR F Female Slim IDC Part No: E10980FC F Male Slim IDC Part No: E10980MC F Male Slim RJ45 Part No: E10980MR Specifications Application: Bandwidth: Insertion loss: Impedance Coaxial Interface: Impedance RJ45: Return loss: Common Mode Rejection: Distance Maximum: Operating conditions: Humidity: Application CATV, Satellite Receiver, FM Radio, VHF/UHF TV 5 MHz to 862 MHz < 3 db 75 ohm 100 ohm More than 18 db from 10 to 862 MHz > 20 db from 40 to 862 MHz 60m Cat 5e cable, 100m with amplifier 0-55 C (storage -20 C to 85 C). Up to 95% non-condensing Transmission of CATV, VHF, UHF and FM Bands can now be achieved using Cat 5e/6 structured cabling and a pair of CATV Baluns operating back to back thus allowing for cost effective distribution of these transmissions. STB TV CATV Feed CATV Amplifier Splitter Cat 5e/6 E10980MR Coax E10980MR E10980MR STB TV CATV Mini Baluns F Female Part No: E10980FB F Male Part No: E10980MB RFI/EMC Compliant when used with fully shielded cable. The unit adopts IDC terminals with a stuffer cap which holds the wires for easy termination. All other specifications same as Standard RF/CATV Baluns CATV Balun Cable The CATV Patch Cable allows traditional 75-ohm coaxial cable to be replaced by a single pair of Shielded Cat 5e/6 STP cable, Used in pairs, the CATV Balun allows broadband CATV equipment to be integrated into structured cabling systems thereby allowing CATV equipment to be moved or added to any convenient modular wall outlet. It provides a versatile cabling solution for broadband video systems used by schools, government, corporations, hospitals, financial institutions, hotels and convention centres. The CATV balun works in conjunction with CATV splitters, amplifiers and cable modems for a total cabling solution. F Male to RJ45 Part No: E10980CFM PAL Male to RJ45 Part No: E10980CPM Different cable lengths are available, from 50cm to 3m. Specifications: Bandwidth: 5MHz to 2.4GHz Impedance: 75 ohm to 100 ohm Connectors: Shielded RJ45 Plug pins 8(+) / 7(-) F Male or PAL Male Cable: Shielded Cat 5e/6, 24 gauge typical Max. distance: 30m on Shielded Cat 5e cable 35

36 Crimping Tools - Ratchet Type RG58, RG59, RG , 0.187, 0.213, Part No: E8010 RG58, RG59, RG , 0.068, 0.255, Part No: E8012 RG174, RG , 0.068, 0.078, 0.128, 0.151, Part No: E8015 RG179, RG180, RG , 0.039, , 0.128, Part No: E8017 RG179, RA , 0.128, 0.190, Part No: E8018 Modular 8P RJ45/RJ12/RJ11 Built in Round Cable Stripper Part No: E8020 Modular RJ45 Built in Round Cable Stripper Part No: E8025 Modular 6P2C/6P4C/RJ11/6P6C/RJ12 Part No: E8036 Modular 8P RJ45 Part No: E8038 Modular 8P-RJ45/6P6C- RJ12/6P4C-RJ11 Part No: E8039 Shielded RJ45 Hirose Short body Part No: E8040 Bootlace Terminals Insulated and Non Insulated AWG 22/20/18/16/14/12 Part No: E8045 Compression Crimp Tool BNC/F/RCA connectors Part No: E8048 Coaxial Stripping Tools - 3 Blades Cable Slitter UTP, STP, Cat 5, RG59/6/11/7 Coaxial, & flat telephone cable Part No: E8060 RG58/59/6 4/8 mm step Part No: E8070 For Coax mm 4/8 mm step Part No: E8075 Professional slitter with adjustable blades for cut depth. Part No: E8050 Impact Tools BNC Insertion & Extraction Tool For Krone Terminal Block Part No: E8080 For 110/88 Terminal Block Part No: E8085 Impact Tool for both Krone & 110/88 Terminal Blocks Part No: E8087 Remove BNC Connectors in high density, hard to reach places. 8 Blade Length Part No: E8090 Precision Side Cutters Cut up to 18 AWG or 1mm copper or soft metal Part No: E

37 CCTV Multifunction Testers These CCTV Multifunction Testers are equipment every CCTV installer must have in his tool kit. They will enable everyday installation functions to be performed at the camera end right to the DVR end, including UTP Cat 5e/6 cabling wiring. Checking and controlling PTZ cameras is now a simple job as is video levels with the video generation capability of the unit. Unit comes complete with a lanyard, allowing it to be suspended around the neck, making it safer when climbing a ladder to test cameras. Base Model Advanced Model with Multimeter Part No: E9000T Part No: E9010T Specifications Video Signal: PAL/ NTSC PAL/NTSC Display: 2.5 inch LCD screen, 960 x 240 resolution English OSD 2.5 inch LCD screen, 960 x 240 resolution (Brightness menu Adjustable). English OSD Menu Video Input/Output: BNC Female BNC Female PTZ Communication: RS232, RS422 simplex and RS485 RS232, RS422 simplex and RS485 PTZ Protocol: RS485 protocols provided with the Tester include: Pelco D, RS485 protocols provided with the Tester include: Pelco D, P, Everfocus, KDI304, KDI405, KDIKB3, LG, MLP2, MLP1, P; Samsung, Panasonic, Lilin, Dynacolor, Vicon, Videotrec, Dynacolour, AD, Videotrec, Vicon, Alec, CSR600, Molynx, AO1, BO1, CSR600, Alec, Molynx, Yaan. Additional Yaan, A01, B01 & Samsung. Additional Protocols may be Protocols may be added as per customer request. added as per customer request. Baud Rate: 2400,4800,9600, ,4800,9600,19200 Signal Generating: Output 4 colour video signal for testing monitor Output colour bar and individual colours Voltage Test N/A DC Test: Max: 1000V AC Test: Max: 750V Resistance Test N/A Max: 40MΩ Voltage Output N/A DC12V 400mA max Operational Time N/A 4-5 hours to typical camera Video Signal Level N/A Video signal Vp-p and Sync Pulse UTP Cable Test: Test UTP cable connection state Test UTP cable connection state RS485 Data Test: Test RS485 data sent from controlling device Test RS485 data sent from controlling device Power Adapter: DC9V DC9V Rechargeable: 5 hours recharging time, 5 hours operation 6 hours recharging time, 10 hours operation Low Consumption: Sleeping mode, display battery power state Sleeping mode, display battery power state Environment: -30 o C to +70 o C; Relative Humidity 30%-90% -30 C C Relative Humidity 30%-90% Dimensions: 170mm x 99mm x 48mm 166mm x 91mm x 48mm Accessories: Battery (2), Power Adaptor, UTP Cable Tester, BNC Patch Cable, Test Cable, Lanyard, User Manual Testing Options - Advanced Model Power Adaptor, UTP Cable Tester, BNC Patch Cable, Test Probe Set, Lanyard, DC12V Power Cable, User Manual Video Test using internal & external monitor Output power to camera Digital Multi-meter PTZ Test RS485 Data Test UTP Cable Test Video Generation Colours Generated (E9010T) 37

38 Coaxial Cables Industry Standard Specification Coaxial Cables for video or digital transmissions. Drum sizes can be tailored to suit your requirements for custom orders. RG59, RG179, RG6, RA7000, BT3002 etc Category 5e, 6 and Multipair Cables Industry Standard Specification Cat 5e, Cat 6 Cables for Video and Data. Twisted Pair Cables shielded or unshielded. Solid or multi-stranded centre conductor. 1, 2, 4, 8, 10, 16, 20, 25 pairs. RJ45 Connectors RJ45 Connector Solid Conductor Part No: RJ45 RJ45 Connector Stranded Conductor Part No: RJ45S Shielded RJ45 Connector Solid Conductor Part No: RJ45S/H RJ45 Boots Coloured Boots for RJ45 Plugs. Available in Yellow, Green, Blue, Red & Grey. Part No: RJ45B/** (replace ** with colour required) (e.g. For red colour, part number would be RJ45B/red) Patch Cables Standard Sized Coaxial Cables - Military Specification RG179 cable terminated BNC Male to BNC male. 400mm P/N: E /RG mm P/N: E /RG mm P/N: E /RG179 We can also custom make other cables with your choice of cable type, length & connectors. Figure 8 Cable Figure 8 Cables in Grey / Black with a stranded conductor. Available in light, medium and heavy gauge for camera power or tamper switches. Fibre Patch Cables OM1 62.5/125 Micron multimode and single mode patch cables and OM3 50/125 Multimode Fibre Patch Cables are available in various LC, SC, ST combinations in 1m, 3m, 5m, 10m up to 20m lengths 38

39 Sharpmark Cable Labels These Self-Laminating cable labels are designed to wrap around the cable, laminating it as they are applied to create a durable, easy-to-read cable label. They can also be used as a flag label if desired. Made from adhesive polyester & supplied on A4 sheets suitable for all standard office laser printers, the top third of the label is the print area, and the bottom two thirds of the label is clear polyester which over-laminates the printed part once applied. Technical Specifications Label Material: Matt transparent polyester, laser printable. Adhesive: Permanent acrylic, specially designed for synthetic face materials, with excellent clarity, UV stability, good water resistance, good adhesion and good heat resistance. Temperatures: Min. Application temp: +5 C Service temp: -20 C to +100 C Available in 4 standard sizes to suit different cable diameters (actual sizes shown): 38 x 12.7 mm 105 labels per sheet Part No: SLL-4L 38 x 25.4 mm 49 labels per sheet Part No: SLL-10L 57 x 25.4 mm 35 labels per sheet Part No: SLL-12L Part No: SLL-24L 140 x 25.4 mm 14 labels per sheet Available in 4 standard colours : Colours are representative only Other colours are available on request. Sharpmark Panel Labels An extensive range of labels for patch panels, cabinets, racks and outlets/faceplates ensure that every installation is professionally labelled. The labels are designed to fit all commonly installed equipment. Labels are supplied on A4 sheets for easy in-house printing and are available as either slide-in or adhesive labels. Part No: PL2 Adhesive 9 x 127 mm 26 labels per sheet PL5 Non-Adhesive 11.5 x 104 mm 24 labels per sheet PL6 Non-Adhesive 12.5 x 198 mm 22 labels per sheet PL10 Adhesive 9 x 92 mm 39 labels per sheet Other sizes are available upon request. 39

40 Coaxial Connectors Manufactured to international standards, EQL s coaxial connectors have been selected and used by many telecommunications manufacturers, systems integrators and service providers throughout the world. Features of these connectors include: Plugs and Sockets available in Crimp, Clamp, Solder or Printed Circuit Board Design High reliability through use of Teflon insulation and gold plated mating contacts High mating cycles >500 Very low reflection coefficient <0.1 at 1GHz Very low insertion loss up to 1 GHz High screening effectiveness/low transfer impedance Cable Types Available for Connector Range: EQL hold stock of Coaxial Connectors for most common cable types, including: RG59, RG179, BT3002, RA7000 etc and can custom make connectors, to specification, for any cable type. To request a quote or to order, just add cable type to the end of the part number. For example: For 1.6/5.6 Male Straight Crimp to suit BT3002 Cable, the full part number is E30600CR/BT3002 For BNC Male Straight Crimp to suit RG179 Cable, the full part number is E40810CR/RG /5.6 Series Connectors Male Straight Crimp Part No: E30600CR Male Straight Clamp Part No: E30600CL Male Bulkhead Solder Part No: E30600BS Male R/Angle Crimp Part No: E30900CR Male R/Angle Clamp Part No: E30900CL Male R/Angle PCB Part No: E30900PCB Female Straight Crimp Part No: E30800CR Female Straight Clamp Part No: E30800CL Female PCB Vertical Part No: E30800PCB Female Bulkhead Solder Part No: E30800BS Female R/Angle Crimp Part No: E30950CR Female R/Angle Clamp Part No: E30950CL Female R/Angle PCB Part No: E30950PCB Non-Monitoring U-link Part No: E30100 Centre Monitoring U-link Non Isolating Part No: E30200 Offset Monitoring U-link Non Isolating Part No: E For Isolation type: Add /aa to the end of Part number for required db of isolation. (e.g. 20dB isolation, Part Number is E30300/20)

41 1.0/2.3 Series Connectors Male Straight Crimp Part No: E40580CR Female Straight Crimp Part No: E40600CR Male R/Angle Crimp Part No: E40630CR Female R/Angle Crimp Part No: E40650CR SMB Series Connectors Plug Straight Crimp (Female Pin) Part No: E40100CR Jack Straight Crimp (Male Pin) Part No: Plug R/Angle Crimp (Female Pin) Part No: E40150CR Jack R/Angle Crimp (Male Pin) Part No: E40220CR Type 43 (SMZ) Series Connectors Jack PCB Vertical Mount (Male Pin) Part No: E40160 Jack PCB Right Angle (Male Pin) Part No: E40165 Male HDC Straight Crimp Part No: E40520CR Male Floating Straight Crimp Part No: E40525CR Female Straight Crimp Part No: E40540CR Female R/Angle Crimp Part No: E40560CR M4 Series Connectors Male Crimp Part No: E40850CR Male Bulkhead Solder Part No: E40850BS Female Straight Crimp Part No: E40860CR Female Bulkhead Solder Part No: E40860BS M4 Male Boot Part No: E40850CR/Boot F Type Connectors TNC Connectors Male Straight Crimp Part No: E30980CR TNC Male Straight Crimp Part No: E40680CR 41

42 BNC Series Connectors Male Straight Crimp Part No: E40810CR Male Bulkhead Solder Part No: E40810BS Male R/Angle Crimp Part No: E40815CR Female Bulkhead Crimp Part No: E40820CR Female PCB Vertical Part No: E40820PCB Female Straight Crimp Part No: E40825CR T & H Monitors F to F Bulkhead Isolated Adaptor Part No: E40840I BNC (F) to BNC (F) Non Isolated Adaptor Part No: E40840S BNC (M) to BNC (M) Adaptor Part No: E40365 Male U-Link Non Monitoring Part No: E40810U20 Other configurations are also available. 1.6/5.6 H Monitor FFF Back F monitor port Part No: E40450/aa Coaxial Adaptors 1.6/5.6 T Monitor MFF Centre F monitor port Part No: E40480/aa 1.6/5.6 T Monitor FMF Centre M monitor port Part No: E40490/aa BNC T Monitor MFF End F monitor port Part No: E40500/aa aa = Attenuation / Isolation in db 1.0/2.3 (M) to 1.0/2.3 (F) Part No: E /5.6 (M) to BNC (F) Part No: E /5.6 (M) to BNC (M) Part No: E /5.6 (F) to BNC (M) Part No: E /5.6 (F) to BNC (F) Part No: E /5.6 (M) to 1.6/5.6 (M) Part No: E /5.6 (F) to 1.6/5.6 (F) Part No: E /5.6 (F) to 1.0/2.3 (M) Part No: E40340 BNC (M) to 1.0/2.3 (F) Part No: Type 43 (F) to Type 43 (F) Part No: E40415 BNC (M) to BNC (M) Part No: E40365 F to F Bulkhead Isolated Part No: E40840I BNC (F) to BNC (F) Non Isolated Part No: E40840S 42

43 G703 Baluns & Applications Transmission baluns are used for matching impedance from a balanced source or input to an unbalanced output, hence the term balun. In telecommunications, a balanced source is connected using twisted pair cabling (120Ω impedance) and an unbalanced source is coaxial (75Ω impedance). Other impedances such as 100 ohms for twisted pair and 50 ohms for coaxial may be used on occasion. The primary function of the balun is to provide matching to the source or load to maximise power transfer between the connected systems and therefore minimise reflections that would otherwise impair the signal, resulting in higher bit error rates for digital transmissions. G703 Standard Balun Specifications Electrical Characteristics Data speeds up to 8 Mbps for Standard E1/E2 Baluns and 34 Mbps for E3 Balun Impedance is ohm resistive to ohm resistive at MHz The insertion loss at MHz is less than 0.4 db between 0.1 MHz to 10 MHz Cross talk between any two baluns with 15mm pitch is < -70 db between 0.1 MHz to 10 MHz Return Loss is better than 24 db between 1 MHz to 10 MHz conforming with G703 Physical Characteristics Designed to fit inside a 15 x 15 x 52 mm volume The mechanical endurance of coaxial connectors are designed for > 500 connect/disconnect cycles The 120 ohm IDC connectors are designed to accept conductors with a nominal diameter of 0.5 mm The IDC termination is designed for up to 200 cycles and is offset to allow twisted pair cable to pass between baluns (B) Twisted pair anchor has a slit to allow cable to be positioned after termination (A) G703 Standard Baluns 1.6/5.6 Male Part No: E10020S 1.6/5.6 Female Part No: E10030S BNC Male Part No: E10040S BNC Female Bulkhead Part No: E10060S Signal 1:1.26 Pin A 75 Ω 120 Ω Ground B Schematic Diagram G BNC Female Panel Mount Part No: E10060SP Type 43 Female Part No: E10085S Type 43 Male Floating Part No: E10090S G703 Quick Connect Baluns (No impact tool required) Part Number for E3 Balun: Replace S with H (e.g. E10020H) To facilitate installation, EQL is now offering its range of G703 Baluns with a quick connect insertion tab. Twisted pair cable can now be terminated onto the IDC without the use of an insertion tool, saving on cost of tool and installation time. Available coaxial interfaces are the same for standard baluns. Part Number: Add F to end of Standard E1/E2 Balun or E3 Balun Part Numbers (e.g. E10030SF for E1/E2 or E10030HF for E3) Front View Rear View G703 Wire Wrap Baluns The specifications for Wire Wrap baluns are identical to those of the Standard baluns and are available for all coaxial interface types. Wire Wrap pins are 1.2 mm square. Part Number: Add /W to end of Standard E1/E2 Balun Part Numbers (e.g. E10030S/W) 43

44 G703 Miniature Baluns These single mini baluns enable up to 34 Mbps data rates to be interfaced using coaxial on one side to twisted pair cabling on the other using IDC connectors to achieve quick and reliable connections. These G703 baluns will satisfy most applications where a cost effective solution is required in confined spaces for achieving project outcomes. Typical Specifications Input Impedance: 75 ohm coaxial to 120 ohm twisted pair Insertion Loss: < 0.5 db in band 51 KHz to 10 MHz (8Mbps) < 1.0 db in band 51 KHz to 51 MHz (34Mbps) Return Loss: Better than -18 db from 51 KHz to 10 MHz (8Mbps) From 51 KHz to 51 MHz (34 Mbps) Cross Talk: Better than 70 db from 51 KHz to 10 MHz Pulse Shape: Meets ITU-T G703 Mask High Voltage: Input to Output 1KV DC 60 seconds Temperature: 20 o C to 75 o C Wire Size (IDC): S 0.48mm IDC for 0.5mm mm wire (AWG 24-26) SX 0.35mm IDC for 0.32mm - 0.5mm wire (AWG 26-28) SW 0.20mm IDC for 0.2mm mm wire (AWG 30-32) RFI/EMC Compliant when used with fully shielded cable. Part Numbers: Change Part Number from S to H for 34 Mbits Type Mini Balun Add X or W to Part Number for required IDC size. For example: For a BNC Male for AWG26-28 would be E10230SX. For a 1.6/5.6 Female for 34Mbits and AWG30-32 would be E10220HW Materials Connector Insulation: Teflon Connector Centre Pin: Phosphor Bronze Body/ Cable Holder: Brass Finish Connector: Centre Pin: Gold Body: Gold/Nickel Cable Holder: Nickel G703 Miniature Balun E1/E2 Series 1.6/5.6 Male Screw Part No: E10210S 1.6/5.6 Female Part No: E10220S BNC Male Part No: E10230S BNC Female Bulkhead Part No: E10240S BNC Female Bulkhead Isolated Part No: E10250S 1.0/2.3 Male Part No: E10260S 1.0/2.3 Female Part No: E10270S Type 43 (SMZ) Female Part No: E10280S Type 43 (SMZ) Bulkhead Part No: E10290S Type 43 (SMZ) Floating Part No: E10300S Type 43 (SMZ) HDC Part No: E10320S 44

45 G703 RJ45 Baluns Features Module, 1 Balun, 1 Coaxial Connector to 1 RJ45 or 2 Balun, 2 Coaxial Connectors to 1 RJ45. Transmission Speeds of up to 8 Mbps (E1/E2) or 34 Mbps (E3) Bulkhead Types are rack mountable Impedance 75 to 120 Ohm Typical Specifications Insertion Loss: Less than 0.4dB in band 51KHz to 3.072MHz (<1.0dB for E3) Return Loss: Better than 25dB from 51KHz to 3.072MHz for each channel (<18dB for E3) Cross Talk: Better than 60dB from 51KHz to 3.072MHz Pulse Shape: Meets ITU-T G703 Mask Temperature: Stable over working temperature of 5 o C to +55 o C Materials RJ45 Socket: Shielded 50 micro inch gold contacts Balun Body: Fire Retardant plastic ABS UL 94V-0 Black Insulation: PTFE 1:1.26 T1 BNC 1 T2 BNC 2 N.C. N.C. N.C. N.C. C1 1.0 uf 8P8C Jack 1 Tx + 2 Tx - 4 Rx + 5 Rx G Schematic Diagram Part Numbers for E3 balun: Add H to E1/E2 series (e.g. E10120D becomes E10120DH) G703 RJ45 Balun E1/E2 Series Single 1.6/5.6 Female Part No: E10110S Dual 1.6/5.6 Female (25mm spacing) Part No: E10110D Dual 1.6/5.6 Male (25mm spacing) Part No: E10130D Dual 1.6/5.6 Male (150mm Cable) Part No: E10136D BNC Female Part No: E10120S BNC Female Keystone Part No: E10120SK Dual BNC Female (25m spacing) Part No: E10120D Dual BNC Female Bulkhead (25mm spacing) Part No: E10120DB Dual BNC Female (M3) Front identical to E10120D Part No: E10120DM Twinax Baluns BNC Male Part No: E10140S Dual BNC Male (25mm spacing) Part No: E10140D Dual BNC Male (150mm Cable) Part No: E10146D These baluns have been designed for IBM systems such as 34, 36, 38, 5294 R.W Controller and AS400 Part No: E20800S Compatibility: Twinax Cabling 100ohm, UL style 2498 Data Rate: 0.5M BPS to 5M BPS Insertion Loss: ± 0.5db Return Loss : -20db min Effective Transmission: Up to 330m Up to 700m on 22/24 AWG twisted pair. 45

46 G703 RJ45 Balun Panels Balun Panel, Dual 75 Ohm Coaxial Connections to 1 RJ Ohm Twisted Pair Connection. Offers two E1/E2 or T1/T2 (2 Mbps or 1.5 Mbps) paths into 1 Shielded RJ45 socket Bi-directional signal conversion to ITG G703 recommendations Provides electrical isolation of 1KV from input to output terminals Standard 19 Rack Mount Impedance 75 to 120 Ohm Stable over working temperature of 5 C to +55 C Typical Specifications Data Speed: Up to 8 Mbps Insertion Loss: Less than 0.2 db (2 Mbps) 0.3 db (8 Mbps) Return Loss: Better than 29 db from (2 Mbps) 21 db (8 Mbps) for each channel Cross Talk: Better than 70 db from 51 KHz to 12 MHz Pulse Shape: Meets ITU-T G703 Mask G703 75/120 Ohm Balun Panel BNC Female RJ45 (40) Part No: E60010B40R 2 and 8 Mbps version G703 75/120 Ohm Balun Panel BNC Female RJ45 (32) Part No: E60010B32R 2 and 8 Mbps version G703 75/120 Ohm Balun Panel BNC Female RJ45 (48) Part No: E60010B48R 2 and 8 Mbps version G703 75/120 Ohm Balun Panel 1.6/5.6 Female RJ45 (40) Part No: E60010D40R 2 and 8 Mbps version G703 Line Isolators Isolate digital transmission paths between interfacing equipment with the G703 Line Isolator. This product will improve transmission performance and protect switching systems and transmission equipment from damage. Major Features: Provides Ground Isolation for ITU-T G703 Transmission Improves BER Performance Bi-directional Operation Compact and proven design Passive Device (no power required) Specifications: Transmission: Mbits Impedance: 75 Ω Insertion Loss: < 2.5 db 51 KHz to KHz Pulse Mask: Mark (1) Level 2.37V Space (0) Level V Standard Pulse Width: 244ns Return Loss: > 21 db 51 to 102 KHz > 26 db 102 to 2048 KHz > 25 db 2048 to 3072 KHz Dielectric Strength: > 100 V (AC & DC) Temperature Range: 0 to C (Operating) G703 75/120 Ohm Balun Panel 1.6/5.6 Female RJ45 (48) Part No: E60010D48R 2 and 8 Mbps version BNC Male to BNC Female 75 Ω to 75 Ω Part No: E10155 Type 43 Female to HDC Male 75 Ω to 75 Ω Part No: E

47 Index - Fast Ethernet Switch 22 PoE Extender /2.3 Connector 41 Fibre Converter PoE Injector /5.6 Connector 40 Fibre Switch 24 PoE Injector Hub Camera 13 Fibre Patch Cables 38 PoE Switch 21 A Fisheye Camera 13 PoE Wireless Access Point 25 Access Point 25 Full Body Camera Power Balun 8 Accessories 15, 31 G Power Over Coax Extender 29 Active Balun 10 G703 Balun Power Through Balun 8 Adapter 6, 42 G703 Balun Panel 45 Power And PTZ Balun 9 Analogue and IP over Coax 33 G703 Line Isolator 46 PVD Balun 9 Audio Balun 34 Gigabit Switch 22 Q Audio Visual Balun 34 Ground Loop Isolator 11 Quad Balun 6 AV Balun 34 H Quick Connect Balun 5 B HDTV Balun 34 R Balun Cable 35 High Power Injector 21 Rack Chassis 30, 31, 32 Balun Hub 7, 9, 46 High Power PoE Switch 22 RG179 Cable 38 BNC Balun 4, 43, 45 I RG59 Cable 38 BNC Connector 42 IDC Tool 36 RGB Balun 34 BNC Insertion Tool 36 Impact Tool 36 Right Angle Connector BNC Patch Cables 38 Industrial Serial Converter 26 RJ45 Balun 4, 45 Bulkhead Connector Industrial Switch 26 RJ45 Boots 38 Bullet Camera Industrial PoE Switch 26 RJ45 Crimp Tool 36 C Industrial Media Converter 27 RJ45 Plugs 38 Cable Joiner 42 Injector 21 S Cable Labels 39 Inter Series Connector 42 Serial Converter 31 Cable Slitter 36 IP Balun 28 SFP Transceivers 31 Cat 5 Plugs 38 IP Camera Siemens Connector 40 Cat 5 Splitter 36 IR Camera Single Balun 4 CATV and IP over Coax 33 K SMB Connector 41 CATV Balun 35 Keyboard Mouse Extender 10 Stackable Switch 23 CCTV Balun 4 Keystone Balun 5, 45 Surge Protector 10 CCTV Multifunction Tester 37 Keystone Panel 7 S-Video Balun 34 CCTV Tester 37 Krone Balun 43 T Coax Stripper 36 Krone Tool 36 Transmission Balun Coaxial Adapter 42 L Twinax Balun 45 Coaxial Connectors 40 Labels 39 T&H Monitor 42 Component Video Balun 34 LAN Protector 31 Type 43 Connector 41 Crimp Tools 36 Long Range Balun 10 U D Long Range Ethernet Extender 20 UTP Balun 4 Day/Night Camera M UTP Stripper 36 Dome Camera M4 Connector 41 U-Link Connector 40, 42 Dual Baluns 45 Media Converter 28 V Dual RJ45 Baluns 45 Megapixel Camera Vandal Dome Camera E Mini Balun 44 VGA Balun 11 E1 Balun Multi-Port Switch 22 Video Balun 4 E3 Balun N Video Hub 7, 9 Easy Connect Balun 5 Network Switch 22 Video Over Fibre 32 Ericsson Connector 41 NVR Server 18 W Ethernet Converter 28 NVR Software 19 Waterproof Switch 26 Ethernet Extender 20, 28 O Wire Wrap Balun 43 Ethernet over Coax Outdoor Switch 26 Wireless Access Point 25 Ethernet over Fibre 30 Outdoor Wireless Access Point 25 Wireless LAN 25 Ethernet over Twisted Pair 29, 30 P Wireless Router 25 Ethernet Switch 24 Panel Labels 39 F Panel Mount Connector F Type Balun 4, 35 Patch Cables 38 F Type Connector 41 PoE (Power Over Ethernet)

48