GigE Vision Series SEN TECH. GigE Vision Overview. Key Features. Accessories

Transcription

1 SEN TECH GigE Vision Overview 34 PoE Key Features Accurate CCD Alignment with Precision Housing VGA ~ QSXGA Resolutions (High Speed Frame Rates) (RGB Bayer Filter) or Monochrome Gamma Table (Importing) Area of Interest (AOI) - User Programmable Low Light Extended Integration Smear Reduction Functions DC Auto Iris Lens Connector (specific) Separate User Programmable Xilinx 32MB User Memory 8 Opto-Isolated Configurable I/Os Models Sensor Resolution Frame Rate STC-GE/GEC33A STC-GE/GEC83A STC-GE/GEC133A STC-GE/GEC152A STC-GE/GEC202A STC-GE/GEC500A STC-GE/GEC33OX STC-GE/GEC83OX STC-GE/GEC152OX STC-GE/GEC202OX 1/3 1/2 1/1.8 2/3 Accessories Cables 12W-2P / 02 / 03 / 05 Lenses Various C-Mount Lenses Various Megapixel Lenses Various Telecentric Lenses Lens Mount C-Adapter Network Card Intel Pro MP 0.8 MP 1.2 MP 1.4 MP 2 MP 5 MP 15fps 19fps 36fps 39fps 90fps 35

2 Cased Models Sentech s GigE camera is GigE Vision and GenICam compliant. The camera is available in color or monochrome and comes in resolutions ranging from 5MP to 0.3MP with 15 ~ 90 fps respectively. It features communication over the Ethernet connector, and it has a DC Iris lens connector. Each unit includes the Sentech GigE Vision Software, SDK and DirectX driver. Models Camera Block Diagram 35 mm QSXGA 5 MEGAPIXEL STC-GE500A STC-GEC500A UXGA 2 MEGAPIXEL STC-GE202A STC-GEC202A SXGA SXVGA XGA VGA 1.4 MEGAPIXEL STC-GE152A STC-GEC152A 1.2 MEGAPIXEL STC-GE133A STC-GEC133A 0.8 MEGAPIXEL STC-GE83A STC-GEC83A CCD Image Data Control CDS / AD PoE Available All models are also available in Power Over Ethernet. This camera meets all industry standards for GigE Vision and GenICam. Sentech GigE Interface Gigabit Ethernet 0.3 MEGAPIXEL STC-GE33A STC-GEC33A 37

3 Specifications GigE Models Monochrome STC-GE33A STC-GEC33A STC-GE83A STC-GEC83A STC-GE133A STC-GEC133A STC-GE152A STC-GEC152A STC-GE202A STC-GEC202A STC-GE500A STC-GEC500A Resolution: VGA (0.3 Megapixel) XGA (0.8 Megapixel) SXVGA (1.2 Megapixel) SXGA (1.4 Megapixel) UXGA (2 Megapixel) QSXGA (5 Megapixel) Image Sensor: 1/3 CCD (ICX424AL) 1/3 CCD (ICX204AL) 1/3 CCD (ICX445AL) 1/2 CCD (ICX205AL) 1/1.8 CCD (ICX274AL) 2/3 CCD (ICX625AL) 1/3 CCD (ICX424AQ) 1/3 CCD (ICX204AK) 1/3 CCD (ICX205AQ) 1/2 CCD (ICX205AK) 1/1.8 CCD (ICX274AQ) 2/3 CCD (ICX625AQ) Signal Format: Progressive: Monochrome or Progressive: Monochrome or Frame Rate: 90fps 36fps 39fps 19fps 15fps Active Picture Element: 648 (H) x 494 (V) 1024 (H) x 768 (V) 1280 (H) x 966 (V) 1360 (H) x 1040 (V) 1624 (H) x 1236 (V) 2448 (H) x 2058 (V) Vertical Frequency: Hz Hz Hz Hz Hz Hz Horizontal Frequency: khz khz khz khz khz khz Pixel Clock Frequencies: MHz MHz MHz MHz Sync System: Internal Internal Video Output: Digital 8, 10 or 12 bit Raw Data or RGB 8 bit Digital 8, 10 or 12 bit Raw Data or RGB 8 bit Interface: IEEE802.3 (1000BASE-T) IEEE802.3 (1000BASE-T) Protocol: GenICam 2.0 and GigE Vision 1.2 compliant GenICam 2.0 and GigE Vision 1.2 compliant ALC: Auto iris lens, electronic iris and AGC (ON/OFF) Auto iris lens, electronic iris and AGC (ON/OFF) Communication: UART Communication through Ethernet Port UART Communication through Ethernet Port Trigger Mode: Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure) Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure) Minimum Illumination: 0.58 F F F F F F F F1.2 Gain: 0 to 20.4 db 0 to 20.4 db S/N Ratio: 8bit 3 Digit (Gain 0dB); 10bit 12 Digit (Gain 0dB); 12bit 48 Digit (Gain 0dB) 8bit 4 Digit (Gain 0dB); 10bit 15 Digit (Gain 0dB); 12bit 60 Digit (Gain 0dB) 8bit 3 Digit (Gain 0dB); 10bit 12 Digit (Gain 0dB); 12bit 48 Digit (Gain 0dB) 0.16 F F1.2 Gamma: Gamma 1.0 (Factory default) or uploadable gamma table Gamma 1.0 (Factory default) or uploadable gamma table AOI Function: Programmable AOI setting via the communication Programmable AOI setting via the communication Smear Reduction: ON/OFF selectable via communication ON/OFF selectable via communication Interpolation: Camera: Available on RGB output Camera: Available on RGB output White Balance: DC Iris Lens Control: Camera: Auto, manual and push-to-set white balance (is available on both Raw data output and RGB output) DC IRIS control input with video level target, peak/average and zone weight settings via the communication Camera: Auto, manual and push-to-set white balance (is available on both Raw data output and RGB output) DC IRIS control input with video level target, peak/average and zone weight settings via the communication Lens Mount: C-Mount C-Mount Optical Filter: No IR Cut Filter (IR Cut Filter) No IR Cut Filter (IR Cut Filter) Optical Center Accuracy: Shock: 38G (3 directions, 3 times each) 38G (3 directions, 3 times each) Vibration: 10G (20 to 200Hz) 10G (20 to 200Hz) Input Voltage: 10.8 to 26.4Vdc 10.8 to 26.4Vdc Dimensions (mm): 35 (W) x 35 (H) x 50.6 (D) (1.37 x 1.37 x 1.99 ) 35 (W) x 35 (H) x 50.6 (D) (1.37 x 1.37 x 1.99 ) 0.10 F F1.2 8bit 14 Digit (Gain 0dB); 10bit 15 Digit (Gain 0dB); 12bit 60 Digit (Gain 0dB) 39

4 Xilinx Models Sentech s GigE camera is GigE Vision and GenICam compliant. This camera features a user programmable, a 32MB DDR2 memory and eight userconfigurable I/Os. This allows the user to program their proprietary code and have complete control over the DDR2 memory and, allowing faster downstream system processing. The camera is available in color or monochrome and comes in four resolutions from 2 MP to 0.3MP. 40 mm 40 Models UXGA 2 MEGAPIXEL STC-GE202OX STC-GEC202OX SXGA 1.4 MEGAPIXEL STC-GE152OX STC-GEC152OX Camera Block Diagram CCD Configuration ROM (8Mbit) CDS/AD Sentech User s (XILINX) GigE Interface DDR2 Memory (32M) Gigabit Ethernet Port Power/IO Connector 45.8 mm XGA 0.8 MEGAPIXEL STC-GE83OX STC-GEC83OX Image Data Configuration JTAG IO UART SPI BUS EEPROM (512Kbit) 25MHz Xilinx Option Board JTAG Connector VGA 0.3 MEGAPIXEL STC-GE33OX STC-GEC33OX 40 41

5 Specifications GigE Models Monochrome STC-GE33OX STC-GEC33OX STC-GE83OX STC-GEC83OX STC-GE152OX STC-GEC152OX STC-GE202OX STC-GEC202OX Resolution: VGA (0.3 Megapixel) XGA (0.8 Megapixel) SXGA (1.4 Megapixel) UXGA (2 Megapixel) Image Sensor: 1/3 CCD (ICX424AL) 1/3 CCD (ICX204AL) 1/2 CCD (ICX205AL) 1/1.8 CCD (ICX274AL) 1/3 CCD (ICX424AQ) 1/3 CCD (ICX204AK) 1/2 CCD (ICX205AK) 1/1.8 CCD (ICX274AQ) Signal Format: Progressive: Monochrome or Progressive: Monochrome or Frame Rate: 90fps 36fps 19fps 15fps Active Picture Element: 648 (H) x 494 (V) 1024 (H) x 768 (V) 1360 (H) x 1040 (V) 1624 (H) x 1236 (V) Vertical Frequency: Hz Hz Hz Hz Horizontal Frequency: khz khz khz khz Pixel Clock Frequency: MHz MHz Sync System: Internal Internal Video Output: Digital 8, 10 or 12 bit Raw Data or RGB 8 bit Digital 8, 10 or 12 bit Raw Data or RGB 8 bit Interface: PoE: IEEE802.3af CLASS3(1000BASE-T) PoE: IEEE802.3af CLASS3(1000BASE-T) Protocol: GenICam 2.0 and GigE Vision 1.2 compliant GenICam 2.0 and GigE Vision 1.2 compliant ALC: Auto iris lens, electronic iris and AGC (ON/OFF) Auto iris lens, electronic iris and AGC (ON/OFF) Communication: UART Communication through Ethernet Port UART Communication through Ethernet Port Trigger Mode: Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure) Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure) Minimum Illumination: 0.58 F F F F F F1.2 Gain: 0 to 20.4 db 0 to 20.4 db 0.16 F F1.2 S/N Ratio: 8bit 3 Digit (Gain 0dB); 10bit 12 Digit (Gain 0dB); 12bit 48 Digit (Gain 0dB) 8bit 3 Digit (Gain 0dB); 10bit 12 Digit (Gain 0dB); 12bit 48 Digit (Gain 0dB) Gamma: 1.0 (Factory default) or Downloadable gamma table 1.0 (Factory default) or Downloadable gamma table AOI Function: Programmable AOI setting via the communication Programmable AOI setting via the communication Smear Reduction: Selectable ON/OFF via the communication Selectable ON/OFF via the communication Interpolation: Camera: Available on RGB output Camera: Available on RGB output White Balance: Camera: Auto, manual and push-to-set white balance (available on both Raw data output and RGB output) Camera: Auto, manual and push-to-set white balance (available on both Raw data output and RGB output) DC Iris Lens Control: Auto iris lens connector, DC drive type Auto iris lens connector, DC drive type User Configurable Board: : XILINX (XC3SD1800A, CSG484 package), 1800K gates DDR2: W9725G6JB-25 (Winbond), 32MB EEPROM: M95512-RMN6TP (ST Micro), 512KB Configuration ROM: M25P80-VMP6G (ST Micro), 8MB : XILINX (XC3SD1800A, CSG484 package), 1800K gates DDR2: W9725G6JB-25 (Winbond), 32MB EEPROM: M95512-RMN6TP (ST Micro), 512KB Configuration ROM: M25P80-VMP6G (ST Micro), 8MB Lens Mount: C-Mount C-Mount Optical Filter: No IR Cut Filter (IR Cut Filter) No IR Cut Filter (IR Cut Filter) Optical Center Accuracy: Shock: 70G (3 directions, 3 times each) 70G (3 directions, 3 times each) Vibration: 10G (20 to 200Hz) 10G (20 to 200Hz) Input Voltage: ~ 26.4Vdc via Power/IO Connector or Power Over Ethernet ~ 26.4Vdc via Power/IO Connector or Power Over Ethernet Dimensions: 50 (W) x 50 (H) x 53.4 (D) mm (1.96 x 1.96 x 2.10 ) 50 (W) x 50 (H) x 53.4 (D) mm (1.96 x 1.96 x 2.10 ) 43