PAL VERSION CEC-WP-PV49AB NTSC VERSION CEC-WP-NV49AB CEC-WP-C38 CEC-WP-C60 CEC-WP-CV48 CEC-WP-CV48A CEC-WP-E38 CEC-WP-E60 CEC-WP-EV48 CEC-WP-EV48A

Transcription

1 NTSC VERSION CEC-WP-NV49AB EIA VERSION CEC-WP-E38 CEC-WP-E60 CEC-WP-EV48 CEC-WP-EV48A PAL VERSION CEC-WP-PV49AB CCIR VERSION CEC-WP-C38 CEC-WP-C60 CEC-WP-CV48 CEC-WP-CV48A 1

2 Thank you for your purchase of this product. Before operating the product, please read this instruction manual carefully to ensure proper use of the product. Please store this instruction manual in a safe place for future reference. CONTENTS FEATURES P.2 CAUTIONS P.2 PART NAMES P.4 INSTALLATION P.4 SPECIFICATION P.7&8 FEATURES - Stylish Design for External Home Surveillance - Water & Fog Resistant Glass Coating - Integrated 4-9mm Auto Iris Varifocal Lens (CEC-WP-NV49AB/PV49AB) - Integrated 4-8mm Auto Iris Varifocal Lens (CEC-WP-EV48/EV48A/CV48/CV48A) - IP67 Environmental Rating - 12VDC Power Input This symbol indicates that there is a possibility of injury or damage to equipment. 1. Power supply (1) Use only with a 12V DC power supply marked class 2. (2) Be sure to connect each lead to the appropriate terminal. Wrong connection may cause malfunction and/or damage to the video camera. 2

3 2. Operating and storage locations (1) Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear irrespective of whether the camera is operating or not. This can damage the CCD (Charge Coupled Device). (2) Do not place the camera in the following locations. Locations subjected to extremely high or low temperature Locations under water. Locations subjected to excessive vibrations. (3) When this camera is installed near the equipment, like a wireless communication device that emits strong electromagnetic field, some irregularity such as noise on monitor screen may happen. 3. Handling of the unit Do not allow the camera to be subjected to strong impacts or shocks. The camera could be damaged by improper handling or storage. - Never attempt to disassemble or modify the camera. - If any abnormality should occur, immediately turn off the power and consult your dealer. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This machine generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to correct the interference at the userís own expense. The CE Marking is a Directive Conformity mark of the European Union (EU). 3

4 PART NAMES Front fi Top Rear fl 6-pin cable connector (female) 6-pin cable connector (male) Base mount Front housing fi Rear housing fl Upper arrow Sunshield Bracket Bottom INSTALLATION FOCUS & ZOOM ADJUSTMENT W T N CEC-WP-E38/E60/C38/C60 CEC-WP-EV48/EV48A/CV48/CV48A CEC-WP-NV49AB/PV49AB 1. Remove the front housing of the camera 2. Loosen the lock screw 3. Adjust the zoom by turning the pin to either T or W. After adjusting the zoom turn the focus pin for clear picture. 4. Fasten the lock screw when the focus is adjusted. 4

5 Be sure to detach the front housing in a dry environment to avoid risk of moisture invasion.when reattaching the front housing, make sure to tight the front housing formly to assurewater resistance. DIP SWITCH SETTING for CEC-WP-NV49AB/PV49AB (Factory Settings) No. Name Position Function 4 No Function 3 Auto Gain Control AGC OFF AGC Gain level varies from 0-26dB OFF Gain level fixes at 0dB Set to this position when strong light BLC comes from behind the target 2 Back Light Compensation BLC OFF OFF Normal position *BLC function is effective with AGC function ATW Traces and adjusts WB automatically 1 Auto White Balance ATW AWB AWB Adjusts WB automatically and fixes it DC IRIS LEVEL ADJUSTMENT for CEC-WP-NV49AB/PV49AB 1. Turn the dip switch AGC to OFF. 2. Adjust DC iris level according to lightcondition. 3. Turn the dip switch AGC to ON. MOUNTING BRACKET AND SUNSHEILD Tight the screw to attach the sunshield and the bracket. Please refer to the drawing on the right. Bracket Wall Mount 5 Ceiling Mount

6 CONNECTION OF WEATHER PROOF CABLE Push to lock Make sure to point the arrow to the top with the camera arrow for proper connection.when connecting keep pushing the plastic part to the end for lock. Slide release to unlock When disconnecting pull out the lock-releaf by hand for unlock. please do not grab the plastic part of cable to pull. The cable connection must be attached in all the way to assure water resistance. 6

7 SPECIFICATION Model No. CEC-WP-NV49AB CEC-WP-PV49AB Focal Length mm Max. Aperture Ratio 1 : 1.6 Iris F D Angle Of View H V TV System NTSC PAL Scanning System 2:1 Interlace Image Sensor 1/4" IT. CCD Effective Elements (H x V) 768 x x 582 Scanning Frequency (H / V) kHz / 59.94Hz kHz / 50.0Hz Video Outputs 1.0V (p-p) / 75 Resolution (H) 480 TV lines Min. Illuminance (50IRE) 2.5 Lux AGC Less Than 26dB S/N Ratio (AGC Off) More Than 48dB Gamma Characteristics 0.6 Sync. System Internal Iris Control DC Iris : 1/60 Sec. Fixed DC Iris : 1/50 Sec. Fixed White Balance ATW / AWB Power Supply DC12V ± 10% Power Consumption (Max.) 180 ma Ambient Temperature Operation : 30 C ~ +50 C External Dimensions 135mm (L) x 56mm (ø) Weight Approx. 360g Dip Switch Setting AGC / BLC / WB Input & Output 6 Pins Weather Proof Connector Features and specifications are subjected to change without any notice for further improvement. NOTE 7

8 Model No. CEC-WP-E38 / E60 / EV48 / EV48A CEC-WP-C38 / C60 / CV48 / CV48A Focal Length 3.8mm / 6.0mm / mm / mm Max. Aperture Ratio 1:2.0 / 1:2.5 / 1:2.0 / 1:2.0 Iris F2.0 / F2.5 / F / F D 90.0 / 57.8 / / Angle Of View H 71.5 / 45.7 / / V 53.4 / 34.0 / / TV System EIA CCIR Scanning System 2:1 Interlace Image Sensor 1/3" IT. CCD Effective Elements (H x V) 512 x x 582 Scanning Frequency (H / V) kHz / 59.94Hz kHz / 50.0Hz Video Outputs 1.0V (p-p) / 75 Resolution (H) 380 TV lines Min. Illuminance (50IRE) 0.6 Lux / 0.8 Lux / 0.6 Lux / 0.6 Lux AGC (Max.) +12dB S/N Ratio (AGC Off) More Than 47dB Gamma Characteristics 0.45 Sync. System Internal Iris Control AES : 1/60 ~ 1/80,000 Sec. AES : 1/50 ~ 1/80,000 Sec. DC Iris : 1/60 Sec. Fixed DC Iris : 1/50 Sec. Fixed White Balance ATW / AWB Power Supply DC12V ± 10% Power Consumption (Max.) 140mA / 140mA / 140mA / 180 ma Ambient Temperature Operation : 30 C ~ +50 C External Dimensions 135mm (L) x 56mm (ø) Weight Approx.330g / 330g / 330g / 360g Input & Output 6 Pins Weather Proof Connector Features and specifications are subjected to change without any notice for further improvement. 8 PRINTED IN JAPAN