김홍경. Full HD One-Cable Box Camera. HDB-N36NN(P)B8D/NoBrand M.J.KWON. 2.4Mega 1/2.8" CMOS High Resolution M.J.KWON

Transcription

1 M.J.KWON Full HD One-Cable Box Camera 2.4Mega 1/2.8" CMOS High Resolution HDB-N36NN(P)B8D/NoBrand 김홍경 M.J.KWON A

2 Full HD One-Cable Box Camera 2.4Mega 1/2.8" CMOS High Resolution

3 FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. CE COMPLIANCE STATEMENT WARNING : This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 2

4 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer?s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being wa lked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. CAUTION?THESE SERVICING IN STRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. 16. Use satisfy clause 2.5 of IEC /UL or Certified/Listed Class 2 power source only. 3

5 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, with an equilateral triangle, is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 4

6 6 CAMERA OVERVIEW 7 CONTENTS OF PACKAGE 7 8 CONNECTIONS LENS

7 The 1/2.8" 2.4M HD CMOS camera, especially for closed circuit television CCTV and security surveillance application. 1.0 lux(color), 0.1 lux(bw) 1/2.8" 25/ p BLC (Back-light compensation) Auto and manual white balance modes (ATW/AWC/Manual/AWB) 3 DWDR 4 HSBLC Operates in DC 28.5V (from the Camera controller plus) 6

8 CVBS CAMERA OVERVIEW 2x1/4-20UNC 45.3(1.78)14.0(0.55) Bottom View 6.9(0.27) 124.0(4.88) 56.0(2.2) 1-32UNEF 66.0(2.59) Front View Side View Unit: mm(inch) Left Button Up Button Enter Button Right Button Down Button Power Indicator 8 Video Out & Power Input Connector(BNC) AHD Monitor Out Connector(RCA) Video out Mode switch (AHD / CVBS) CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. The content of the package includes: 1. Color camera 2. Mini-DIN connector (for dc-type auto-iris lens) 3. CS adapter ring for C mounting "C" lenses 4. This manual 7

9 BACKLIGHT WHITE BAL SENS-UP D-WDR <BACKLIGHT> BLC HSBLC <WHITE BAL> ATW AWC->SET INDOOR OUTDOOR MANUAL AWB <DAY&NIGHT> <EXIT> SHARPNESS LSC D-EFFECT DEFECT DET CAM TITLE MONITOR VIDEO OUT LANGUAGE COMET SAVE& END RESET NOT SAVE 8

10 1) 2) INDOOR, OUTDOOR Select the DC iris speed 0~15 MAIN MANU LENS DC EXPOSURE BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO IMAGE SYSTEM EXIT SAVE&END MAIN MANU MANUAL LENS EXPOSURE BACK LIGHT WHITE BAL DAY&NIGHT IMAGE SYSTEM EXIT ATW AUTO SAVE&END The EXPOSURE menu is used to set the automatic light control method for the camera. It provides the ability to adjust the SHUTTER speed, AGC, SENS-UP, BRIGHTNESS, D-WDR, and DEFOG functions of the camera. 1/50000, x2 ~ x30 AGC Adjust the Auto Gain Control level ) SENS-UP Select the Digital Slow Shutter level., AUTO (x2 ~ x30) BRIGHTNESS Adjust the BRIGHTNESS level D-WDR Select the Digital WDR. AUTO, ON(level 0~8), DEFOG < EXPOSURE > MODE POS/SIZE GRADATION DEFAULT AUTO, Adjust the window position & size 0~2 Initialize the setting values MAIN MANU LENS DC EXPOSURE BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO IMAGE SYSTEM EXIT SAVE&END SHUTTER AGC SENS-UP BRIGHTNESS D-WDR DEFOG AUTO l 11 AUTO l 48 9

11 BACKLIGHT The BACKLIGHT menu is used to the ability to prevent back lighting from the image. 1)BLC Prevents such a back light effect to secure a clear image under All illumination environments. Adjust the size of Back Light Compensation area. LEVEL AREA DEFAULT Select the BLC gain Low, Middle, High Adjust the window position & size Initialize the setting values 2)HSBLC Mask the high light zone with specific color & level. SELECT Select the HSBLC area AREA1 - AREA4 DISPLAY Adjust the HSBLC area window position & size BLACK MASK Select the BLACK MASK ON, LEVEL Select the HSBLC level 0 ~ 100 MODE All Day, Night DEFAULT Initialize the setting values. < BACKLIGHT > MAIN MANU LENS DC EXPOSURE BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO IMAGE SYSTEM EXIT SAVE&END BLC LEVEL MIDDLE AREA DEFAULT HLBLC SELECT AREA DISPLAY ON BLACK MASK ON LEVEL l 30 MODE ALL DAY DEFAULT 10

12 WHITE BALANCE The screen color can be adjusted by using the Auto White Balance function. It compensates for deviations in the white color caused by changes in the color temperature of the light source so that the colors are reproduced correctly. 1)ATW 2)AWC->SET 3)INDOOR 4)OUTDOOR 5)MANUAL 6)AWB Automatically adjust color temperature. Automatically readjust only by pressing AWC SET. Set the color temperature to 3200 K Set the color temperature to 6300 K Manual mode. User can change Red and Blue gain value manually. BLUE RED 0 ~ ~ 100 Automatically extended range of color temperature adjustment. < WHITE BALANCE > MODE MAIN MANU LENS DC EXPOSURE BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO IMAGE SYSTEM EXIT SAVE&END MANUAL BLUE I 50 RED I 50 11

13 The DAY&NIGHT menu is used to configue the day and night related. setting for the camera. CDS DAY&NIGHT mode are changed according to the brightness of the image. Use only when the camera is installed in a dark place but the camera is viewing a bright place. When used in a normal installation, hunting may occur. IR SMART LEVEL 1~15 AREA Adjust the window position & size. < DAY&NIGHT > MODE MAIN MANU LENS DC EXPOSURE BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO IMAGE SYSTEM EXIT SAVE&END D&N AUTO D N (CDS) I 206 D N (DELAY) I 3 N D (CDS) I 180 N D (DELAY) I 3 B&W IR SMART ON 12

14 The IMAGE menu provides the ability to adjust the SHARPNESS, LSC and D-EFFECT functions of the camera. 1) SHARPNESS Adjust the SHARPNESS level., AUTO (0-10) 2) LSC Select the lens Lens Shading Compensation. ON, 3) D-EFFECT FREEZE Select real or still mode ON, MIRROR Select, MIRROR, V-FLIP, ROTATE NEG. IMAGE Select Negative image mode ON, MAIN MANU LENS DC EXPOSURE BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO IMAGE SYSTEM EXIT SAVE&END IMAGE SHARPNESS LSC D-EFFECT AUTO < SHARPNESS > < D-EFFECT > IMAGE SHARPNESS LSC D-EFFECT IMAGE SHARPNESS LSC D-EFFECT AUTO AUTO SHARPNESS LEVEL SMART AGC END AGC I 5 I 128 I 160 D-EFFECT FREEZE MIRROR NEG. IMAGE 13

15 and 1) DNR 2D 3D 2) MOTION SELECT DISPLAY SENSITIVITY COLOR Select Digital Noise Reduction., LOW, MIDDLE, HIGH, LOW, MIDDLE, HIGH Detects the Motioned Object in the image. ON, Select the Motion area AREA1 - AREA4 Adjust the Motion area window position & size Adjust the Motion sensitivity level Select the motion area color WHITE - Red, Green, Blue TRANS Select the motion area transparency. 1.0, 0.75, 0.5, 0.25 ALARM VIEW TYPE Select the Motion alarm Select view type of the Motion area, BLOCK, OUTLINE, ALL OSD VIEW Select the Motion OSD view, ON TIME Select the Motion Alarm time 1-15 DEFAULT Initialize the setting values 3) PRIVACY SELECT DISPLAY COLOR TRANS DEFAULT Hide an area you want to hide on the screen. Select the privacy zone AREA1 - AREA4 Adjust the Privacy window type, position & size, INV., MOSAIC, COLOR Select the privacy zone color WHITE - USER Select the privacy zone transparency 1.0, 0.75, 0.5, 0.25 Initialize the setting values 4) DEFECT DET Compensates for bad pixels. LIVE DPC AGC LEVEL Select the Live DPC mode, ON Select the AGC level LEVEL Select the Live DPC level WHITE DPC POS/SIZE Select the White DPC mode, ON Adjust the White DPC area window position & size START DPC VIEW Start the white pixels correction, ON LEVEL AGC Select the White DPC level 0-60 Select the AGC Level 0-14 SENS-UP Select the Sens-up level x2 - x30 BLACK DPC Select the Black DPC mode, ON POS/SIZE Adjust the Black DPC area window position & size START Start the Black pixels correction DPC VIEW, ON LEVEL Select the Black DPC level < > MAIN MANU LENS DC EXPOSURE BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO IMAGE SYSTEM EXIT SAVE&END DNR MOTION PRIVACY DEFECT DET 14

16 <DNR> DNR MOTION PRIVACY DEFECT DET 2D 3D DNR MIDDLE MIDDLE <MOTION> DNR MOTION PRIVACY DEFECT DET < PRIVACY> DNR MOTION PRIVACY DEFECT DET MOTION SELECT DISPLAY SENSITIVITY COLOR TRANS ALARM DEFAULT AREA1 ON I 10 WHITE 1.0 PRIVACY SELECT AREA1 DISPLAY COLOR COLOR WHITE TRANS 1.0 DEFAULT < DEFECT DET> DNR MOTION PRIVACY DEFECT DET DEFECT DET LIVE DPC WHITE DPC BLACK DPC DEFECT DET LIVE DPC WHITE DPC BLACK DPC ON ON ON ON LIVE DPC AGC LEVEL LEVEL WHITE DPC POS/SIZE START DPC VIEW LEVEL AGC SENS-UP I 4 I X2 CLOSE THE IRIS THEN PRESS ENTER WAITING... DEFECT DET LIVE DPC WHITE DPC BLACK DPC ON ON ON BLACK DPC POS/SIZE START DPC VIEW LEVEL

17 SYSTEM The IMAGE menu provides the ability to adjust the CAM TITLE, RS485, MONITOR, CVBS CROP, VIDEO OUT, LANGUAGE and VERSION functions of the camera. 1) CAM TITLE Maximum of 15 characters are allowed. 2) MONITOR LCD BLUE GAIN RED GAIN GAMMA CRT BLUE GAIN RED GAIN GAMMA Select the Monitor type LCD, CRT Adjust the Blue gain level Adjust the Red gain level Select the gamma level USER, Adjust the Blue gain level Adjust the Red gain level Select the gamma level USER, ) VIDEO OUT Select the video out type NTSC, PAL 5) LANGUAGE OSD menu LANGUAGE (16ea) ENGLISH etc. 6) COMET Select the COMET function, ON < SYSTEM> MAIN MANU LENS DC EXPOSURE BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO IMAGE SYSTEM EXIT SAVE&END CAM TITLE MONITOR VIDEO OUT LANGUAGE COMET SYSTEM LCD NTSC ENGLISH < CAM TITLE> CAM TITLE MONITOR VIDEO OUT LANGUAGE COMET SYSTEM LCD NTSC ENGLISH CAM TITLE A B C D E F G H I J K L M N O P Q R S T U V WXYZ () - _ /=& : ~,. CLR POS END 16

18 < MONITER> CAM TITLE MONITOR VIDEO OUT LANGUAGE COMET SYSTEM LCD NTSC ENGLISH LCD GAMMA RED GAIN BLUE GAIN USER EXIT The EXIT menu provides the ability to adjust the RESET, SAVE & END and NOT SAVE functions of the camera. 1) EXIT RESET SAVE & END NOT SAVE Factory initialization of camera settings Save and exit menu Exiting the menu without saving 17

19 CONNECTIONS 1. VIDEO OUT & POWER INPUT CONNECTOR(BNC) BNC : This BNC connector provides a video signal and Power.(from Camera Controller Plus) 2. MONITOR OUT CONNECTOR(RCA) RCA : This RCA Connector provides a Video Signal (AHD / CVBS) LENS INSTALLING AUTO IRIS LENS 18

20 SPECIFICATIONS Power MODEL Power Source Power Consumption Image sensor Total Pixels Active Pixels Scanning system Sync. System Video Frame Rate General CVBS Resolution Min. illumination Camera Control S/N Ratio Lens Shutter AGC Exposure SENS-UP Brightness D-WDR Defog Backlight White Balance Day & Night DNR 2DNR 3DNR Function Camera Title D-Effect Motion Detection Privacy Masking Language Defect Detection Sharpness Monitor LSC (Shading) Video mode COMET Save & Exit Power input Video out Transmission Distance Connector Auto Iris Output & Lens etc. Operating temperature Operating humidity External dimension Weight Full HD BOX CAMERA From the Camera Controller plus(dc 28.5V) MAX 3.5 Watts (120mA) 1/2.8" 2.4M Sony CMOS 2000(H) x 1121(V) 1920(H) x 1080(V) Progressive Internal 1920x1080@25fps ; 1920x1080@30fps 1000 TVL 1.0 lux(color), 0.1 lux(bw) OSD (Joystick Switch) More than 50dB (AGC off) DC / MANUAL AUTO, 1/60, FLK ~ 1/50,000 sec 1 ~ 15 / AUTO (x2, x4, x6, x8, x10, x15, x20, x25, x30) 1 ~ 100 / ON / AUTO / AUTO / BLC / HSBLC ATW / AWC / INDOOR / OUTDOOR / AWB AUTO / COLOR / B&W / LOW / MIDDLE / HIGH / LOW / MIDDLE / HIGH / ON / FREEZE / MIRROR / NEG.IMAGE / ON (4 zone) / ON (4 zone) ENG / CHN1 / CHN2 / GER / FRA / ITA / SPA / POL / RUS / POR / NED / TUR / KOR / JPN / HEB / ARB LIVE DPC / WHITE DPC / BLACK DPC / AUTO (0 ~ 10) CRT / LCD / ON NTSC / PAL / ON SAVE & EXIT / NO SAVE / RESET BNC Connector BNC Connector (AHD high / CVBS standard - definition video output) Over 500m via 75-3 coaxial cable 4-pin mini din jack (Standard Connection) C/CS mount (Selected through back focus) 0 ~ 96% (non-condensing) 66(W) x 56(H) x 124(D) mm Approx. 250g 19

21

22

23

24

25 A