VN6XSII IR Outdoor Camera

Transcription

1 VN6XSII IR Outdoor Camera Version Released on July.01, 2013 Page 1 / 19

2 Dear Customers! By selecting this product, you have decided to use a professional device that guarantees highest quality and reliability. We would like to thank you very much for your confidence and kindly ask you to read the following instructions carefully before installation and operation in order to take full advantage of all quality features regarding this product. The lighting flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at its own expense. WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment. CAUTION To prevent electric shock and risk of the fire hazards -Do NOT use power source other than that specified. -Do NOT expose this appliance to rain or moisture. This installation should be made by a qualified service person and should conform to all local codes. Page 2 / 19

3 Table of Contents 1. Precautions Limitation of liability Disclaimer of warranty Package Installation ~ How to mount to Ceiling / Wall Axis Adjustment 5.3. Lens external adjustment, EXT-Video 5.4. OSD Manual for functions control 6. Functions and operation ~16 7. Troubleshooting guide Dimension (mm) How to use Coaxial Remote Controller Specification Page 3 / 19

4 1. Precautions Please read the manual carefully before the installation in order to set up the camera correctly and to obtain the best picture quality. Please keep the manual in good condition for your future reference and service application. Installation and services should be only carried out by an authorized personnel according to local safety regulations. If any liquid or solid matter gets into the housing, immediately disconnect the camera from power supply and have it checked by your authorized dealer before reusing.. Avoid installing the camera at extremely hot or cold places. If you are not a certified person, never try to dismantle the camera. To avoid electric shock, never remove the screws or covers. There are no parts inside that need maintenance by the user. All maintenance should be carried out by qualified personnel. Avoid installing the camera at a place of high humidity. Avoid installing the camera at the place exposed to gas or oil. Keep the top glass of the lens always clean in order to obtain the best picture quality all the time. Be careful not to be stained by fingerprint. Don't face the camera directly toward sunlight or sunlight reflecting area. CCD may go defective at this condition. Please give a special attention to keep the unit from dangerous drop or external shock during the process of transportation or handling. Never try to touch the camera in wet hand. It may cause an electric shock. Do not expose the camera to radioactivity. It causes a serious damage on the CCD. 2. Limitation of liability This publication is provided AS IS without warranty of any kind, either express or implied, including but not limited to, the implied warranties of merchantability, fitness for any particular purpose, or noninfringement of the third party's right. This publication could include technical inaccuracies or typographical errors. Changes are added to the information herein, at any time, for the improvements of this publication and/or the corresponding product(s). Page 4 / 19

5 3. Disclaimer of warranty In no event shall seller be liable to any party or any person, except for replacement or reasonable maintenance of the product, for the cases, including but not limited to below: (1) Any damage and loss, including without limitation, direct or indirect, special, consequential or exemplary, arising out of or relating to the product; (2) Personal injury or any damage caused by inappropriate use or negligent operation of the user; (3) Unauthorized disassemble, repair or modification of the product by the user; (4) Inconvenience or any loss arising when images are not displayed, due to any reason or cause including any failure or problem of the product; (5) Any problem, consequential inconvenience, or loss or damage, arising out of the system combined by the devices of third party. (6) Any claim or action for damages, brought by any person or organization being photogenic subject, due to violation of privacy with the result of that surveillance-camera's picture, including saved data, for some reason, becomes public or is used for the purpose other than surveillance. 4. Package Camera x 1 Instruction manual x 1 External Video cable x 1 L-Wrench (4.0mm) x 1 Plastic Anchor x 4 Tapping screw x 4 Page 5 / 19

6 5. Installation 5-1. How to mount to ceiling/ wall (Ceiling) (wall) 1 Drill three screw holes on the wall plate to fix three plastic anchors (supplied) in the holes. 2 Fix the plastic anchors in the holes. 3 Position the mounting bracket on the screw points. 4 Fix the mounting bracket by tightening the screws. 5 Slightly loosen bolt (A) then adjust tilt(180 ) and rotation(360 ) of the camera using a serration on the bracket and tighten the bolt firmly. 6 Slightly loosen bolt (B) then adjust pan(360 ) of the camera and tighten the bolt firmly. Page 6 / 19

7 Axis Adjustment 1 Pan 360 Slightly loosen Pan bolt then adjust pan of the camera using a serration on the bracket and tighten the bolt firmly. 2 Tilt 180 Slightly loosen Tilt bolt then adjust tilt of the camera using a serration on the bracket and tighten the bolt firmly. 3 Rotation 360 Slightly loosen Tilt bolt then adjust rotation of the camera using a serration on the bracket and tighten the bolt firmly Lens external adjustment, EXT-Video Zoom & Focus External Adjustment with Lens Dial (Patent pending) Users can adjust Zoom & Focus with easy by turning the lens control dial by hand. OSD Button (B) Ext-Video (A) - How to use EXT-video 1) Turn the OSD cap counterclockwise. OSD cap is designed to be hanging from the camera even after opening it. 2) Connect Extra video output connector (A) to camera tester or local monitor as shown in the above. Then, control the lens by using Zoom & Focus dial OSD Manual for functions control How to use tactile switch on the OSD control Push to enter the menu or to save settings. Push up or down to select functions Push left or right to adjust levels. Page 7 / 19

8 6. Functions and operation 6-1. On Screen Display (OSD) Menu Configuration 6-2. Setting up the menu 1. Press the Tact SW to enter <MAIN MENU>. 2. Move the arrow to a specific menu by pushing the Tact SW up or down. 3. Adjust the selected feature by pushing the Tact SW left or right. 4. When completed, move the arrow indicator to EXIT and press the Tact SW to finish all settings. Page 8 / 19

9 Note If indication appears on a selected sub-menu, press the Tact SW to get into a following menu. If --- indication appears on any sub-menu, it means the function with this mark is deactivated. (Ex : When SENS-UP is OFF, 3-DNR becomes deactivated --- ) 6-3. LENS Select the lens and adjust the SETUP suitable to the type of lens. When DC lens is used. ( Default) 1. Please select the lens mode to DC IRIS. 2. Press the Tact SW to enter the <DC LENS>. - BRIGHTNESS: adjust the brightness of screen when the environment is extremely bright or dark. - IRIS SPEED: IRIS speed of the shutter is adjustable. It is useful when the light condition of the environment keeps changing quickly. - IRIS SCAN: Automatically traces and sets IRIS value value.( It is recommended to use right after installation or changing DC Lens mode as OUTDOOR/INDOOR) - MODE : Sets DC Lens Mode as OUTDOOR/INDOOR. - RETURN : Return to MAIN MENU. When MANUAL lens is used. 1. Please select the lens mode to MANUAL. 2. Press the Tact SW to enter the <MANUAL LENS>. - BRIGHTNESS: same as above 6-4. EXPOSURE (1) AGC (Auto Gain Control) - OFF: Deactivates the AGC function. - LOW: Allows automatic gain control from 0 to 20dB. - MIDDLE: Allows automatic gain control from 0 to 30dB. - HIGH: Allows automatic gain control from 0 to 42dB.( Default) Page 9 / 19

10 When D&N mode is set as AUTO, AGC is fixed as HIGH. The higher the gain level, the brighter the screen becomes while the higher the noise as well. (2) SHUTTER A. AUTO : The shutter speed is Limit. - SHUT. MIN : 1/50 fix. - SHUT. MAX : FLK ~ 100,000( Default 1/1000) B. FLK : Please select FLK mode when flickering occurs on the screen due to an imbalance between illumination and frequency. C. MANUAL : The shutter speed is controlled manually.(wdr OFF) - You can select the speed from 1/60 to 1/100,000 sec. (NTSC), 1/50 to 1/100,000 sec. (PAL). - You can select Digital Slow Shutter. (DSS) between x2 ~ x256. (3) SENS-UP - Low light sensitivity is greatly improved with the use of this function. - Low light sensitivity level is adjustable from 2 to 256 times. - When SEN-UP level is higher, the picture becomes brighter while noise is increased at the same rate of SENS-UP. AUTO : Adjustable SENS-UP level between x2 ~ x1024. OFF: SENS-UP is disabled. Default setting is <x8> Note When the SHUTTER is set to MANUAL /FLK mode, SENS-UP does not operate. When the AGC is set to OFF, SENS-UP does not operate. (4) RETURN Return to MAIN MENU DAY / NIGHT It is used to improve the sensitivity and clarity of picture quality at low light - AUTO : The image is automatically converted to B/W from Color. Infrared camera 1 DELAY : Level 0 ~ 15.( Default 1.) 2 D N(AGC) : 0Lux ~ 16Lux.( Default 3Lux) 3 N D(CDS) : 2Lux ~ 18Lux.( Default 5Lux) 4 RETURN : Return to MAIN MENU. Non-Infrared camera 1 DELAY : Level 0 ~ 15.( Default 1.) 2 D N(AGC) : 0Lux ~ 16Lux.( Default 3Lux) 3 N D(AGC) : 2Lux ~ 18Lux.( Default 5Lux) 4 RETURN : Return to MAIN MENU. Page 10 / 19

11 Note There is 2 Lux gap between D N and N D changing value. Hence, D N changing value starts from 0Lux while N D from 2Lux. - DAY : The image is always displayed in color. - NIGHT : The image is always displayed in black and white. NIGHT BURST: Burst ON/OFF selectable. IR SMART : IR SMART ON/OFF selectable. - LEVEL : Level 0 ~ 100.( Default 45) - AREA : Adjust the size and position of the selected area. - RETURN IR LED : LED ON/OFF selectable. RETURN : Return to MAIN MENU 6-6. BACKLIGHT The image quality is greatly improved with the use of this mode when there is a strong backlight behind the object. - OFF : De-activates the WDR function. - DWDR: Camera scans both of bright lit background and shaded area distinctively under an extremely contrasted light situation. LOW LEVEL : HIGH LEVEL : RETURN : Return to MAIN MENU. - BLC: Enables a user to directly select a desired area from a picture and to view the area more clearly. LEVEL : LOW/MIDDLE.HIGH( Default MIDDLE) AREA : SINGLE(POSITION/ZONE)/DOUBLE(POSITION/ZONE) ( Default SINGLE) DEFAULT : Initialize all settings of BLC menu. RETURN : Return to MAIN MENU. - ECLIPSE: Page 11 / 19

12 Can mask the head lights to view car license number plate more clearly. GAIN : Level 0 ~ 100.( Default 50) MODE : NIGHT ONLY/ALL DAY.( Default NIGHT ONLY) MASK LEVEL : Level 0 ~ 100.( Default 70) DEFAULT : Initialize all settings of ECLIPSE menu. M. SKIP AREA : Masking ON(POSITION/SIZE)/OFF selectable. RETURN : Return to MAIN MENU White Balance (WHITE BAL, WB) This is useful to optimize the white balalnce control under a certain artificial lighting area where a standard white balance condition is not suitable. - ATW (Auto Tracking White Balance) This mode can be used within the color temperature range of 1,500 K~11,000 K. ( Default) - AWB This is fuction automatic adjustment of the white balance regardless of the subject conditions especially when the color temperature is out of the range. - AWC SET Use this when the White Balance is deviated. Face the camera toward the white wall or white paper and press the Tact SW. If the environment changes, readjust it. - MANUAL Recommanded to use it when the light temperature is fixed all the time Select INDOOR or OUTDOOR mode. BLUE : Level 0 ~ 100.( Default 30) RED : Level 0 ~ 100.( Default 20) RETURN : Return to MAIN MENU. Note White Balance may not work properly under the following condition - When the color temperature of the environment surrounding the subject is out of the control range.(e.g. clear sky or sunset) - When the ambient illumination of the subject is dim. - If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable. Page 12 / 19

13 6-8. DEFOG - This function enhances visible distance and object color in a specific environment such as fog, yellow sands, etc. which hinders viewing. Under those environment, it is difficult to clarify object or color and DEFOG function overcomes this limitation somehow. - MANUAL LEVEL : Level 0 ~ 31.( Default 20) COLOR GAIN : Level 0 ~ 10.( Default 0) EDGE GAIN : Level 0 ~ 10.( Default 0) GAMMA : Level USER ~ 1.( Default 0.55) RETURN : Return to MAIN MENU. - AUTO LEVEL : Level 0 ~ 5.( Default 3) RETURN : Return to MAIN MENU DNR (3D Noise Reduction) The background noise in the low light level decreases automatically as the level of gain changes. - LEVEL : Level 0 ~ 200.( Default 80) - SMART NR : When Motion is detected, 3DNR level returns to basic LEVEL(80) to prevent any ghost effect. If there is no motion, 3DNR level is maximized up to SMART LEVEL(200) to get clear image. ( Default OFF) - SMART LEVEL : Level 0 ~ 200( Default 200) - SENSITIVITY : Level 0 ~ 100( Default 80) - RETURN : Return to MAIN MENU EFFECTS - D-ZOOM : You can use a digital zoom. ZOOM : Level x1.0 ~ x32.0( Default x2.0) PAN : Level -100 ~ 100( Default 0) TILT : Level -100 ~ 100( Default 0) RETURN : Return to EFFECT. - SMART DZOOM : When Motion detected, DZOOM is operated. ZOOM : Level x2.0 x5.0 ~ 100( Default x2.0) Page 13 / 19

14 POSITION : UP/DOWN/LEFT/RIGHT SENSITIVITY : Level 0 ~ 100( Default 80) TIME : Level 0 ~ 15( Default 1) RETURN : Return to EFFECT. Note - D-ZOOM and SMART DZOOM cannot be used simultaneously. If one of the two function is selected, the other will be shown as FREEZE : You can view still or live image. - D-EFFECT MIRROR : You can flip the picture horizontally on the screen. V-FLIP : You can flip the picture vertically on the screen. ROTATE : You can flip the picture rotatively on the screen. - NEG. IMAGE : You can view negative image. - SHARPNESS : Level 0 ~ 31( Default 20) - LENS SHADING LEVEL : Level 0 ~ 255( Default 30) H-CENTER : Level 0 ~ 255( Default 105). V-CENTER : Level 0 ~ 255( Default 80) RETURN : Return to EFFECT. - BAD PIXEL: BAD PIXEL compensation SENS UP: Level x4 ~ x128( Default x16) DIFF : Level 0 ~ 3( Default 2). THRESHOLD : Level 1 ~ 4( Default 1). START RETURN : Return to EFFECT. - RETURN : Return to MAIN MENU SPECIAL MENU - CAM TITLE - Please position the arrow to point to CAM TITLE by using the UP or DOWN selection. - Please select ON by using the LEFT and RIGHT selection. Plesae press the button to complete ON. Note If OFF is selected, the CAM TITLE does not appear on the monitor even if it has been input. - Up to 15 letters are offered for the CAM TITLE. If you enter a title, the title will be appeared on the monitor. 1 Please move the cursor to the letter to choose by using the UP and DOWN selections. 2 Set an ID from 0~9/ A~Z /a~z by using the UP, DOWN, LEFT and RIGHT selections. 3 Lock in the letters by using the button. - When the letter is locked in, the cursor moves to the next space. Page 14 / 19

15 4 Please repeat the above to input CAM NAME. Note When a wrong name has been input, - If you press the button after moving the cursor to CLR, all letters will be erased. - If you want to correct a letter, please move the cursor to the arrow at the bottom left of the screen and press the button. - Please position the cursor on the letter you wish to correct, and then move the cursor onto the letter you wish to choose and press the button. - When a name has been chosen, please select a position for the name to display. Page 15 / 19 1 Please move the cursor onto POS and then press the button. 2 The name will appear at the top left hand corner. 3 Please find the position you wish to display the name by using the 4 directional selections, and then press the Button. - Please select END and then press the Button to complete CAM TITLE input. - MOTION (Motion Detection: MD) This product has a feature that allows you to observe movement of objects in 4 different areas on the screen, and the words 'MOTION' appear on the screen when movement is detected. You can monitor activity more efficiently. - AREA : You can select up to 4 MD areas. - AREA DISPLAY : Determines whether to use the MD area selected in AREA. Adjust the size and position of the selected area. - SENSITIVITY : Level 0 ~ 100( Default 80) - MOTION VIEW : Display MD areas. - RETURN : Return to SPECIAL. - PRIVACY (Privacy Masking) This function helps you mask an area you want to hide on the screen. - AREA : You can select up to 8 PRIVACY areas. - AREA DISPLAY : Determines whether to use the selected in AREA. Adjust the size and position of the selected area. - COLOR : Determines area color. You can select 16 colors. - TRANSPARENCY : Level 0 ~ 3( Default 3) - RETURN : Return to SPECIAL. - LANGUAGE You can select the menu language according to your requirements. - English, Korean, Japanese, Chinese, Russian, French, Spanish,

16 Italian, Portuguese, Netherlandic, German, Polish, Turkish, Hebrew, Arabic are available. - STABILIZER (DIS) This function mitigates any picture movement due to external factors such as wind. Note The camera s resolution decreasesbecause STABILIZER function uses the digital zoom. STABILIZER doesn t operate when background illumination is too low. STABILIZER doesn t operate when object pattern is monotonic like sky or white wall. - MONITOR Please change the settings value of video appropriate to your monitor. - CRT : Please select this menu item when using a CRT monitor. Change the PED level, color gain.. PED LEVEL : Level 0 ~ 63( Default 28). COLOR GAIN : Level 0 ~ 255( Default 144) RETURN : Return to SPECIAL. - LCD : Please select this menu item when using a CRT monitor. Change the PED level, color gain.. PED LEVEL : Level 0 ~ 63( Default 37). COLOR GAIN : Level 0 ~ 255( Default 144) RETURN : Return to SPECIAL. - COMM SET (Communication seting) This function sets up the camera communication status when controlling the camera through an external control device. CAM ID : Determines the camera s identification number. (between 1 and 255). ID DISPLAY : Displays camera title on top left & right side of the screen. Adjust the position of the selected area. BAUD RATE : You can select one of various protocols. PELCO-D, PELCO-P, SPD-S, DONGYANG, NICP BAUD RATE : You can select 2400/4800/9600/19200/38400/57600bps. RETURN : Return to SPECIAL. Note - RS-485 cable : Please connect (-) firstly and then (+) EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. - SAVE : Save the current settings and exit the MAIN MENU. - RESET : Reset the camera setting to the factory defaults. But COMM SET setting are not initialized. - CANCEL : Do not save the current settings and exit the MAIN MENU. Page 16 / 19

17 7. Troubleshooting If there are problems in operating, please refer to the checklist below. If the problem persists, please contact the agent where this product is purchased. Troubleshooting Problems Nothing appears * Please check that the power cord and line connection on the screen. between the camera and monitor are fixed properly. * Please check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the screen is dim. The image on the screen is dark. * Is lens stained with dirt? Clean your lens with soft, clean cloth. * Set the monitor to proper condition. * if the camera is exposed to too strong light, change the camera position. * Adjust the contrast feature of the monitor. * If you have an intermediate device, set the 75Ω / Hi-Z properly (Please check the impedance) The camera is not working properly, and the surface of the camera is hot. Color is not correct. The screen flickers continually. * Please check that you have properly connected the camera to an appropriate power source. * Please check the setting of WHITE BAL SETUP menu. * Please check that direction of camera turns toward the Sun. 8. Dimension (mm) Page 17 / 19

18 9. How to use Coaxial Remote Controller(Option) 1Video signal output connector (BNC) 2Video signal input connector (BNC) 3DC12V connector : When DC12V is being connected, battery power is automatically cut off. 4Battery : Battery power On/Off button. Battery power is automatically being off in 5 minutes after battery is being used. Push battery button to re-start 5On/Off : Battery power operation status window - Battery power on : LED blinking - Battery power off : LED lamp off 6TELE(UP), WIDE(DOWN), FAR(RIGHT), NEAR(LEFT), ENT(SET) : OSD, Zoom * Caution when using Coaxial Remote Controller 1. Be sure to insert batteries correctly by matching the + and polarity markings. 2. Remove batteries if product is not to be used with for a long time. 3. Do not short-circuit the supply terminals. 4. Never disassemble or modify this product in any way. The problems caused by unauthorized modifications or attempted repair are out of warranty. * System Connection Diagram Page 18 / 19

19 10. Specification MODEL Image sensor Effective Pixels VN6XSII 1/3" Sony 960H Super HAD CCDⅡ NTSC : 976(H) x 494(V), PAL : 976(H) x 582(V) H. Resolution 700TV Lines(Color) / 750TV Lines(B/W) Synchronizing system Scanning system Video output S/N ratio Min. Illumination Shutter Speed Internal NTSC : 525 Lines PAL : 625 Lines 2:1 Interlaced 1.0Vp-p Composite 75 Ohms More than 52dB (AGC Off) 0Lux Gamma Correction Standard γ = 0.45 White Balance Gain Control Smear Effect 0.005% Power source Operating current Lens(Standard) Lens(Option) LED Spectrum Viewable Distance MTBF of IR Iris Control Operating temp./humidity NTSC:1/60~1/10,000 sec. PAL:1/50~1/10,000 sec. 1,800 K ~ 10,500 K Auto (ATW/AWB/AWC SET/Manual) Standard : 6dB ~ 40dB Auto 12VDC, 12VDC/24VAC 12VDC:140mA/12VDC(IR Off), 400mA/12VDC(IR On) 12VDC/24VAC 190mA/24VAC(IR Off),610mA/24VAC(IR On) 90mA/24VAC(IR Off),250mA/24VAC(IR On) mm Varifocal DC Auto Iris lens 3.6mm/ 6mm Fixed lens 850nm Up to 30M at Moonless Night 20,000 hours Auto IP Rating 67 Measurement (mm) Weight (Approx. g) 1500 FUNCTION -10 C ~ 50 C (Humidity : 0% RH ~ 90% RH), Option : -40 C ~ 50 C(-40 F ~ 122 F) 87.7(W) x96(v)x278.1(l) Shutter White Balance Picture Adjust Privacy Polygon 3DNR Camera ID Language Auto/ Manual/FLK ATW/AWB/AWC SET/Manual MIRROR, V-FLIP, ROTATE, Brightness, Sharpness On/Off (8 Zone setting available) On/ Off On/ Off English/ Germany/ French/ Russian/ Spanish/ Portuguese, Japanese *Specifications are subject to change without prior notice for better improvement. Page 19 / 19