Millikelvin measurement platform for SQUIDs and cryogenic sensors
|
|
|
- Raymond Moses McBride
- 6 years ago
- Views:
Transcription
1 Cryoconference 2010 Millikelvin measurement platform for SQUIDs and cryogenic sensors M. Schmidt, J. Beyer, D. Drung, J.-H. Storm Physikalisch-Technische Bundesanstalt, Abbe Str. 2-22, Berlin, Germany Outline: Motivation Characterization Setup and Mounting Summary
2 Motivation Applications: SQUID characterization at low temperature (10mK - 500mK) Fast readout (dc - 100s MHz) for analysis of high-frequency SQUID performance Operation of TES/SQUID-based optical photon counters Requirement of the cryostat: Continuously cooling Temperature stability Large experimental volume dry 3 He/ 4 He dilution refrigerator
3 Cooling system dry 3 He/ 4 He dilution refrigerator 300 K 70 K 4 K 800 mk 100 mk 10 mk
4 Characterization of the Cooling power I R no fine tuning needed Heater base plate MFFT P base plate =2050µW n& 3 T Still Q & n& 3 Requested cooling power mk T base plate (mk) P base plate =1365µW P base plate =911µW P base plate =405µW P base plate =200µW T min =8.3mK 50 P base plate =50µW P base plate =0µW P Still (mw)
5 Parasitic load and results of the characterization 2 Q & = 84n& 3T Q& 0 Q & 0 = 1,3µW P base plate (µw) Points Fit without offset Fit T base plate (mk) Sufficient cooling power No fine tuning of the still power necessary Typical parasitic load on the base plate Temperature stability: 30 µk rms --> no influence of the SQUIDs
6 Measurement inserts Sensor module for SQUID characterization 2 coaxial cables for fast readout Optical fiber feedthrough for TES/SQUID applications Requirements of the setup: Prevention of stress and vibrations Good thermal connections Increase of temperature so small as possible Electromagnetic shielding of the cables
7 Measurement module for characterization and low temperature detectors 5 SQUID channels 5x7 twisted pair dc wires - Conductive Material: CuNi (Alloy30), AWG32 - Shield: stainless steel low thermal conductivity Estimation of the head load Wiedemann-Franz law: Q& = A( T T ) λ ( ) T T2 i i= T step λ = T L i L T ρ ρ (Ω m) & dc = 900nW Q wires Brass Alloy30 Copper T (K)
8 Magnetic shielding High accurate characterization of SQUIDs Problem: low-frequency magnetic fields z a Superconductor magnetic shield Magnetic shield: Aluminium Tc: 1.2 K a=30 mm, z=100 mm SQUID positions trans: 0.61a axial: 0.15z and 0.89z zero points
9 SQUID mount Connectors (5 channels) PCB SQUIDs 100mm Magntic shield 60mm Base plate with SQUID module
10 High frequency SQUID measurement module 2 coaxial cable - Material: Brass - Dielectric: PTFE (Teflon) - Impedance: 50 Ohm - SMA connector Best possible electromagnetic shield Fast readout (dc-100s MHz) potential Problem: difficult coupling of the inner core Calculation: 300 K to 100 mk produce 200 µw heat flow to base Coupling on the 4 K-stage or decoupling from higher to lower stages very important Test coax: 106 mk base temperature 8.4 K inner core on the 4Kstage
11 Decoupling of the inner conductor Limiting the heat flow Thermal conductivity: - Brass: 4 K - NbTi: 4 K NbTi R PTFE 8.4K R OC/4K R NbTi/CuNi 4K 4K T base = 9.6 mk R PTFE Outer conductor Inner conductor Schematic diagramm (4K-stage) Mount on the 4K-plate
12 Fiber feedthrough for optical and near infrared TES applications Characterization of TES/SQUID Optical photon counter optical fiber I TES SQUID & TES electronics (analog) 300K <100mK 300K Two optical fibers from 300K to 10mK minimize scattered light
13 Mounting and thermal coupling fiber box thermal coupling Fiber TES SQUID TES/SQUID mount PCB Bonds
14 Summary Characterization 8.3 mk minimal temperature Sufficient cooling power for many experiments Temperature stability: 30 µk rms Sensor module for SQUID characterization Low head load to the base plate Magnetic shield High frequency SQUID measurement module Reduce heat flow to base plate ( T min =9.6 mk) Fiber feedthrough for optical and near infrared TES applications Simple and inexpensive method Compact SQUID/TES mount
15 Circuit of connections +F -F Feedback Coil 1 -INR R B,TES R TES V OUT 300K -V +V -INR +R Shunted 16-SQUID Array Bias Resistor +IN +R +F -F Feedback Coil 2 -INR -V +V -INR +R rf Filters Shunted 16-SQUID Array Bias Resistor +IN +R <100mK
16 Characterization of the cryostat 1000 precooling condensing continuouscycle 100 T (K) 10 70K plate (PT100) 4K plate (cernox) MC plate (RuO) phase separation t (hours) Precooling: PTC + circuit to precool lower stages Condensing: Joule-Thomson-Impedance to liquefy the mixture Continuous cycle: phase separation
Micro-manipulated Cryogenic & Vacuum Probe Systems
Janis micro-manipulated probe stations are designed for non-destructive electrical testing using DC, RF, and fiber-optic probes. They are useful in a variety of fields including semiconductors, MEMS, superconductivity,
A Low Noise GHz Amplifier
A Low Noise 3.4-4.6 GHz Amplifier C. Risacher*, M. Dahlgren*, V. Belitsky* * GARD, Radio & Space Science Department with Onsala Space Observatory, Microtechnology Centre at Chalmers (MC2), Chalmers University
TECHNICAL REPORT: CVEL Parasitic Inductance Cancellation for Filtering to Chassis Ground Using Surface Mount Capacitors
TECHNICAL REPORT: CVEL-14-059 Parasitic Inductance Cancellation for Filtering to Chassis Ground Using Surface Mount Capacitors Andrew J. McDowell and Dr. Todd H. Hubing Clemson University April 30, 2014
The Low-Noise, Integrated Transformer Helium-4 Dipstick Insert
The Low-Noise, Integrated Transformer Helium-4 Dipstick Insert Sang Lin Chu Georgia Institute Of Technology 837 State Street N.W. Atlanta, GA 30332 gte813m@prism.gatech.edu, sanglinchu@hotmail.com December
Cu 0.37 Brass Cu 0.37 Brass
To: From: EDGES MEMO #148 MASSACHUSETTS INSTITUTE OF TECHNOLOGY HAYSTACK OBSERVATORY WESTFORD, MASSACHUSETTS 01886 October 7, 2014 Telephone: 781-981-5400 Fax: 781-981-0590 EDGES Group Alan E.E. Rogers
RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].
![RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].](/thumbs/90/101629325.jpg "RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].")
RP SMA Male Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44724 Configuration SMA Male Reverse Polarity
Features OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
Additel 875 Series Dry Well Calibrators
Additel 875 Series Dry Well Calibrators Three models ranging from -40 to 660 Portable, rugged, and quick to temperature Metrology-level performance in stability, uniformity, accuracy and loading effect
Times Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 480.48 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
attocube systems Probe Stations for Extreme Environments CRYOGENIC PROBE STATION fundamentals principles of cryogenic probe stations
PAGE 88 & 2008 2007 PRODUCT CATALOG CRYOGENIC PROBE STATION fundamentals...................... 90 principles of cryogenic probe stations attocps I.......................... 92 ultra stable cryogenic probe
3.7 Grounding Design for EAST Superconducting Tokamak
3.7 Design for EAST Superconducting Tokamak LIU Zhengzhi 3.7.1 Introduction system is a relevant part of the layout of Tokamak. It is important and indispensable for the system reliability and safety on
Ultrastable Low-Noise Current Amplifiers With Extended Range and Improved Accuracy
Ultrastable Low-Noise Current Amplifiers With Extended Range and Improved Accuracy (Ultrastable Low-Noise Current Amplifier ULCA) D. Drung and C. Krause Thanks to... Physikalisch-Technische Bundesanstalt
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55 RF Connectors Technical Data Sheet Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG142, RG223, RG400, RG55
AOM Driver A35-Series
AOM Driver A35-Series 5 Watt RF Drivers for Acousto-Optic Modulators The A35xxx RF driver series provides up to 5 Watt output power. Various types cover a frequency range from 40 to 350 MHz. The maximum
- Datasheet - Features: Version 1.1. Cryogenic Low Pass Filter Unit Type KA-Fil 2a
Cryogenic Low Pass Filter Unit Type KA-Fil 2a - Datasheet - Version 1.1 Features: 5 Independent Low Pass Filters Operating Range 300K to 4.2K Overriding Diodes allow Bypassing and Pulsing Small Size 2009
Technician License. Course
Technician License Course Technician License Course Chapter 4 Lesson Plan Module - 9 Antenna Fundamentals Feed Lines & SWR The Antenna System The Antenna System Antenna: Transforms current into radio waves
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
Efficiency: 68% Temperature Range: +0 to 60 C Max VSWR: 5:1. Class: Supply Voltage:
Part Number Revision 2.C Release Date July 11 2007 Revision Notes - updated new format Amplifier Name Technical Specifications Summary Frequency Range: P1dB: Class: Supply Voltage: 88-108 MHz 750 Watts
Surge Protection and Grounding Issues
Surge Protection and Grounding Issues Presented to SCTE Chicago Chapter January 21, 2004 By: Nisar Chaudhry VP Electrical Engineering, CTO Introduction Transients caused by disturbances on the power lines
086 Model Series. 50Ω DC to 18 GHz. The Big Deal
HAND Coaxial TM Cable 50Ω DC to 18 GHz 086 Model Series The Big Deal Hand Formable Tight Bend Radius Excellent Return Loss and Insertion Loss Ideal for interconnect of assembled systems CASE STYLE: KP1505-XX
UHV Double-Ended SMA Feedthrough, , Conflat compatible flange
SMA Interface SMA Interface Grounded and Feedthroughs UHV Double-Ended SMA Feedthrough, 110730, Conflat compatible flange UHV male SMA cable 5 assembly, 110755, Kapton insulated 50-ohm coaxial cable Features
2mm metric system INTRODUCTION MAIN FEATURES
INTRODUCTION MAIN FEATURE Mini coaxial connectors combine the high performance of coaxial connectors with the convenience, compactness and cost effectiveness of hard metric modules. COAX Excellent electrical
Cable Attachment Method (Shield/Contact) Size Length, in [mm] 0.98 [24.89] Width/Dia., in [mm] [9.53]. Weight, lbs [g] 0.02 [9.07] 3.
![Cable Attachment Method (Shield/Contact) Size Length, in [mm] 0.98 [24.89] Width/Dia., in [mm] [9.53]. Weight, lbs [g] 0.02 [9.07] 3.](/thumbs/94/121044667.jpg "Cable Attachment Method (Shield/Contact) Size Length, in [mm] 0.98 [24.89] Width/Dia., in [mm] [9.53]. Weight, lbs [g] 0.02 [9.07] 3.")
Configuration Interface Type Cable Attachment Method (Shield/Contact) Body Style PE-SR402AL,PE-SR402FL,RG402 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications
SMA Self-Fixture End Launch Connectors
SMA Self-Fixture End Launch Connectors INTRODUCTION / APPLICATIONS Applications for these connectors include: An ideal solution for design engineers who are obligated to cut manufacturing costs and complexity
First tests of prototype SCUBA-2 array
First tests of prototype SCUBA-2 array Adam Woodcraft Astronomical Instrumentation Group School of Physics and Astronomy,Cardiff University http://woodcraft.lowtemp lowtemp.org/ Techniques and Instrumentation
SPECIFICATIONS FOR AN MRBR 7.0 TESLA / 210MM ACTIVELY SHIELDED MAGNET SYSTEM
SPECIFICATIONS FOR AN MRBR 7.0 TESLA / 210MM ACTIVELY SHIELDED MAGNET SYSTEM Prepared by:- Magnex Scientific Limited The Magnet Technology Centre 6 Mead Road Oxford Industrial Park Yarnton, Oxford OX5
K band Focal Plane Array: Mechanical and Cryogenic Considerations Steve White,Bob Simon, Mike Stennes February 20, 2008 COLD ELECTRONICS
K band Focal Plane Array: Mechanical and Cryogenic Considerations Steve White,Bob Simon, Mike Stennes February 20, 2008 CRYOGENICS AND DEWAR DESIGN The dewar outside dimension must be less than the 36
EQCD High Speed Characterization Summary
EQCD High Speed Characterization Summary PRODUCT DESCRIPTION: A length of coaxial ribbon cable is terminated to a transition PCB break-out region onto which respective connectors are soldered. Three such
SC6015 DATA SHEET. BNC Female Bulkhead Connector Crimp/Solder Attachment For.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable
BNC Female Bulkhead Connector Crimp/Solder Attachment For 100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable BNC female bulkhead connector with crimp/solder attachment for 100 inch, RG316,
Development of a noval Switched Beam Antenna for Communications
Master Thesis Presentation Development of a noval Switched Beam Antenna for Communications By Ashraf Abuelhaija Supervised by Prof. Dr.-Ing. Klaus Solbach Institute of Microwave and RF Technology Department
Revision CON-RPSMA-RA DATASHEET
Revision 1.0.0 CON-RPSMA-RA DATASHEET RADIOTRONIX, INC. Radiotronix 905 Messenger Lane Moore, Oklahoma 73160 Phone 405.794.7730 Fax 405.794.7477 www.radiotronix.com 1 Document Control SIGNED DATE CREATED
141 SMNB Model Series
HAND Coaxial TM Cable 50Ω DC to 12.5 GHz 141 SMNB Model Series The Big Deal N-Type (F) Bulkhead Connector to SMA (M) Hand Formable Tight Bend-Radius (8mm min.) Ideal for interconnect of assembled systems
MASSACHUSETTS INSTITUTE OF TECHNOLOGY HAYSTACK OBSERVATORY
To: From: EDGES MEMO #073 MASSACHUSETTS INSTITUTE OF TECHNOLOGY HAYSTACK OBSERVATORY WESTFORD, MASSACHUSETTS 01886 Updated July 16, 2012 Telephone: 781-981-5407 Fax: 781-981-0590 EDGES Group Alan E.E.
Model 340 Temperature Controller
86 Instruments Model 340 Temperature Controller Model 340 Temperature Controller Features Operates down to 100 mk with appropriate NTC RTD sensors Two sensor inputs; expandable to ten sensor inputs Supports
A Low-Loss VHF/UHF Diplexer
A Low-Loss / Diplexer Why use two lengths of expensive feed line when one will do? This hy box lets you use one feed line for both energy, simultaneously! By Pavel Zanek, OK1DNZ Do you need to operate
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5 reliable performance, dependable service Replace traditional RG types for benefit of: lower loss better shielding > - 90dB Drop in replacement
SPINNER RADAR & SATELLITE
Edition B 2012 ONLINE UPDATE High Frequency Performance Worldwide www.spinner-group.com On our website you will find our latest updates. As your contribution to environmental protection you can also download
SPECIFICATIONS FOR A 4.7 TESLA/310MM BORE ACTIVELY SHIELDED MAGNET SYSTEM
SPECIFICATIONS FOR A 4.7 TESLA/310MM BORE ACTIVELY SHIELDED MAGNET SYSTEM Prepared by:- Magnex Scientific Limited The Magnet Technology Centre 6 Mead Road Oxford Industrial Park Yarnton, Oxford OX5 1QU,
High Frequency. ECT-CPG com shop ECT-CPG com
High Frequency HiGH FreQuenCY High Frequency or Radio Frequency (RF) coaxial probes are used for testing high speed circuits in a variety of industries including automotive, wireless communications, satellite,
Product Information Measuring resistor with the Pt100-sensor referring to DIN EN Pt100, Pt500, Pt1000
Platinum sensor probe - Basic information The Pt100-sensor is used for precise temperature monitoring applications, where errors in measurement have to be excluded. The linear relationship of the resistor
Cryogenic Coaxial Cables
elspec distribute Cryogenic Coaxial Cables Cryogenic Cables at elspec group Coaxial cables with an outer conductor of stainless steel are commonly used in systems experiencing temperatures ranging above
PRELIMINARY SPECIFICATIONS MRBR 7.0 TESLA / 210MM ACTIVELY SHIELDED CRYO-COOLED MAGNET SYSTEM
PRELIMINARY SPECIFICATIONS MRBR 7.0 TESLA / 210MM ACTIVELY SHIELDED CRYO-COOLED MAGNET SYSTEM Prepared by:- Magnex Scientific Limited The Magnet Technology Centre 6 Mead Road Oxford Industrial Park Yarnton,
Technician License Course Chapter 4. Lesson Plan Module 9 Antenna Fundamentals, Feed Lines & SWR
Technician License Course Chapter 4 Lesson Plan Module 9 Antenna Fundamentals, Feed Lines & SWR The Antenna System Antenna: Transforms current into radio waves (transmit) and vice versa (receive). Feed
SPECIFICATION FOR A 7.0 TESLA/400MM ROOM TEMPERATURE BORE MAGNET SYSTEM
SPECIFICATION FOR A 7.0 TESLA/400MM ROOM TEMPERATURE BORE MAGNET SYSTEM Prepared by:- Magnex Scientific Limited The Magnet Technology Centre 6 Mead Road Oxford Industrial Park Yarnton, Oxford OX5 1QU,
SQUID Basics. Dietmar Drung Physikalisch-Technische Bundesanstalt (PTB) Berlin, Germany
SQUID Basics Dietmar Drung Physikalisch-Technische Bundesanstalt (PTB) Berlin, Germany Outline: - Introduction - Low-Tc versus high-tc technology - SQUID fundamentals and performance - Readout electronics
TESLA RF POWER COUPLERS DEVELOPMENT AT DESY.
TESLA RF POWER COUPLERS DEVELOPMENT AT DESY. Dwersteg B., Kostin D., Lalayan M., Martens C., Möller W.-D., DESY, D-22603 Hamburg, Germany. Abstract Different RF power couplers for the TESLA Test Facility
Objectives of transmission lines
Introduction to Transmission Lines Applications Telephone Cable TV (CATV, or Community Antenna Television) Broadband network High frequency (RF) circuits, e.g., circuit board, RF circuits, etc. Microwave
Features. = +25 C, With Vee = -5V & VCTL= 0/-5V. Attenuation Range DC GHz 31.5 db
v4.64.5 LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave & VSAT Radios Military & Space Test Instrumentation Functional
Voltage Sensors URV5-Z
Data sheet Version 05.00 Voltage Sensors URV5-Z May 2005 Universal voltage measurements from RF to microwaves The voltage sensors of the URV5-Z series are indispensable tools in RF and microwave laboratories,
CSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
Magnetic Field Compensation System MR-3
Magnetic Field Compensation System MR-3 (DC 1kHz) (DC 10kHz) Description Magnetic Field Compensation System MR-3 can compensate the magnetic field which is measured in three axes. Therefore, it can reduce
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
Sunridge MCD Series Ultimate Miniature Coaxial Interconnect, 1.55mm Mated Height
Sunridge MCD series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCD
= +25 C, Vcc1 = Vcc2 = Vcc3 = +5V
v1.19 DC - 7 MHz, 1 kohm Typical Applications The is ideal for: Laser Sensor FDDI Receiver CATV FM Analog Receiver Wideband Gain Block Low Noise RF Applications Features 1 kohm Transimpedance Very Low
SHF Communication Technologies AG. Wilhelm-von-Siemens-Str. 23D Berlin Germany. Phone Fax
SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23D 12277 Berlin Germany Phone +49 30 772051-0 Fax ++49 30 7531078 E-Mail: sales@shf.de Web: http://www.shf.de Datasheet SHF 100 BPP Broadband
Development of the accelerometer for cryogenic experiments II
Development of the accelerometer for cryogenic experiments II ICRR Univ. of Tokyo, KEK A, Dept. of advanced materials science Univ. of Tokyo B K. Yamamoto, H. Hayakawa, T. Uchiyama, S. Miyoki, H. Ishitsuka,
HMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input
Pin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches
EMC review for Belle II (Grounding & shielding plans) PXD DEPFET system
EMC review for Belle II (Grounding & shielding plans) PXD DEPFET system Outline 1. Introduction 2. Grounding strategy Implementation aspects 3. Noise emission issues Test plans 4. Noise immunity issues
Features. Return Loss (RF1, RF2) Off State GHz db. Input Power for 1 db Compression GHz dbm
POSITIVE CONTROL SWITCH, DC* - 6.0 GHz Typical Applications This switch is suitable for usage in 50-Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 6.0 GHz Functional
Test Cable Assemblies W2 Series - Low Loss & Phase Stability cable W1 Series - Ultra Low Loss cable W-Test Series - for Precition Test
MICROWAVE FARMʼs Test Cable assemblies are complete line of high performance flexible microwave cable assemblies. The W2/W1 seies have Low density PTFE(W201, W213 and W1 series) and porus PFA (W202, W203)
EACON. Field mountable microwave cable. INEXIM Sp. z o.o. Edition Bezpośredni importer i dystrybutor
EACON Field mountable microwave cable Edition 2012 Bezpośredni importer i dystrybutor INEXIM Sp. z o.o. www.inexim.pl Easy connected EACON - the field mountable cable assembly 4 EACON 4C 6 Suitable to
KCN KCN KCN KCN KCN KCN KCN KCN KCN KCN
series KCN4011200000 KCN4032200040 KCN4041100000 KCN4043110180 KCN4043140000 KCN4011200010 KCN4032200050 KCN4043100000 KCN4043110190 KCN4043140090 KCN4011200020 KCN4041200000 KCN4037100000 KCN4043110220
The SPICA-SAFARI TES Bolometer Readout: Developments Towards a Flight System
J Low Temp Phys (2012) 167:561 567 DOI 10.1007/s10909-012-0521-y The SPICA-SAFARI TES Bolometer Readout: Developments Towards a Flight System J. van der Kuur J. Beyer M. Bruijn J.R. Gao R. den Hartog R.
Investigation of a Voltage Probe in Microstrip Technology
Investigation of a Voltage Probe in Microstrip Technology (Specifically in 7-tesla MRI System) By : Mona ParsaMoghadam Supervisor : Prof. Dr. Ing- Klaus Solbach April 2015 Introduction - Thesis work scope
AC Bias Characterization of Low Noise Bolometers for SAFARI Using an Open-Loop Frequency Domain SQUID-based Multiplexer Operating Between 1 and 5 MHz
J Low Temp Phys (2012) 167:161 167 DOI 10.1007/s10909-012-0559-x AC Bias Characterization of Low Noise Bolometers for SAFARI Using an Open-Loop Frequency Domain SQUID-based Multiplexer Operating Between
Microwave Coax Cable
Cable LINCOS microwave coaxial cable basic construction is shown below : Ø 1. Inner Conductor : Solid or Strand Sliver Plated Copper Ø 2. Insulation : Wrapped Low Density PTFE Ø 3. Outer Conductor : Sliver
RF Microwave Standard Assemblies
RF Microwave Standard Assemblies RF Microwave Standard Assemblies 146 Q-Flex Series Specifications Q-Flex assemblies are a unique ALTERNATIVE to custom designed flexible coaxial cables.traditionally custom
Pin Contacts Military Part Number. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp Glenair Part Glenair Part 22 22-28 AWG M39029/107-620 850-007-22-620 M39029/106-614 850-006-22-614 20 20-24
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
DETAIL SPECIFICATION SHEET CABLES, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 50 OHMS, M17/60-RG142.
INCH-POUND MIL-DTL-17/60D 12 October 2006 SUPERSEDING MIL-DTL-17/60D 4 January 2006 DETAIL SPECIFICATION SHEET CABLES, RADIO FREQUENCY, FLEXIBLE, COAXIAL, 50 OHMS, M17/60-RG142. This specification is approved
- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
Frequency Range: MHz. Efficiency: 80% Temperature Range: -20 to 65 C Max VSWR: 3:1. Class: Supply Voltage: 32.0V
Part Number Revision 0.B Release Date October 19, 2007 Revision Notes Final production release Amplifier Name Technical Specifications Summary Frequency Range: 86-108 MHz P1dB: 500 Watts CW Class: C Supply
TNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
Model 332 Temperature Controller
94 Instruments Model 332 Temperature Controller Features Operates down to 500 mk with appropriate NTC RTD sensors Model 332 Temperature Controller Two sensor inputs Supports diode, RTD, and thermocouple
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
HMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
Experimental Plan for Testing the UNM Metamaterial Slow Wave Structure for High Power Microwave Generation
Experimental Plan for Testing the UNM Metamaterial Slow Wave Structure for High Power Microwave Generation Kevin Shipman University of New Mexico Albuquerque, NM MURI Teleseminar August 5, 2016 1 Outline
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
SMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
AOM Driver 2910 Series
AOM Driver 2910 Series 1 to 4 Watt RF Drivers for Acousto-Optic Modulators The 2910 Series RF driver provides up to 4 Watts output power. Various types cover a frequency range of 80 to 350 MHz. The maximum
Contacts M39029 and Glenair signature solutions MIL-DTL Series III type
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
SUPERCONDUCTING NANOTECHNOLOGY
SUPERCONDUCTING NANOTECHNOLOGY Detect everything you want I.TECHNICAL SPECIFICATION OF TERAHERTZ DETECTION SYSTEMS Product description: The Terahertz detection systems are optimized for three frequency
Amphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications
Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the
Current sensor by IZM
Current sensor by IZM TYPICAL APPLICATIONS Current measurement in commutation cell Monitoring of switching behavior of Si, SiC, GaN, or similar semiconductors Measuring of current pulses Analysis of power
Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
db = 10 log10 (P1/P2) where P1 and P2 are two power levels
A Quick Introduction to Decibels (db) Unit is the Bel: named after A.G. Bell who devised it for his work with deafness and audio sound levels. Now used for all frequencies of AC power. Decibel (db): -1
Microwave Coax. w w w. t e m p f l e x. c o m ( ) M i l f o r d R d. S o u t h G r a f t o n, M A
Microwave Coax w w w. t e m p f l e x. c o m ( 5 0 8 ) 8 3 9-5 9 8 7 2 6 M i l f o r d R d. S o u t h G r a f t o n, M A 0 1 5 6 0 Microwave Coax Product Description Low Loss, Flexible Microwave products
Features OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v5.85 Typical Applications Features The HMC348LP3 / HMC348LP3E is ideal for: 75 Ohm Systems CATV Signal Distribution, Cable Modem Headend & DBS IF Switching 5 Ohm Systems Basestation Infrastructure & Test
C240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
A SUBMILLIMETER SIS RECEIVER COOLED BY A COMPACT STIRLING-YT REFRIGERATOR
Eighth International Symposium on Space Terahertz Technology. Harvard Universit y. March 1997 A SUBMILLIMETER SIS RECEIVER COOLED BY A COMPACT STIRLING-YT REFRIGERATOR J.Inatani, T.Noguchi, S.C.Shi, and
HMC478SC70 / 478SC70E v
HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
Influence of Aging Effects on Cables. Influence of Aging Effects on RF behavior Including Mode Conversion of STP and UTP Cables
Influence of Aging Effects on RF behavior Including Mode Conversion of STP and UTP Cables Josef Ohni Research Engineer Philipp Numberger Development Engineer 2017 IEEE-SA Ethernet & IP @ Automotive Technology
UHV Feedthrough, Conflat compatible flange
NC Interface NC Interface Grounded and Feedthroughs UHV Feedthrough, 110116 Conflat compatible flange UHV female cable 4 assembly, 110180, stainless steel Accufast connector and Kapton insulated coaxial
Alternative Coupling Method for Immunity Testing of Power Grid Protection Equipment
Alternative Coupling Method for Immunity Testing of Power Grid Protection Equipment Christian Suttner*, Stefan Tenbohlen Institute of Power Transmission and High Voltage Technology (IEH), University of
= +25 C, With Vee = -5V & VCTL= 0/-5V
v.3.5db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications Features The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave & VSAT Radios Military & Space Test Instrumentation
Coaxial Power Standards
Coaxial Power Standards (Thermistor Mounts) 0.1 MHz to 26.5 GHz FIGURE 1: MODEL F1109 (FEED-THROUGH MOUNT) FIGURE 2: MODEL M1110 (TERMINATING MOUNT) FIGURE 3: MODEL 1807A (FEED-THROUGH MOUNT WITH CASE)