Reliability and High-Performance

Transcription

1 Reliability and High-Performance

2 HEAD OFFICE Exir Broadcasting & Telecom AB Sallerup 2120, SE Hörby, Sweden PHONE: FAX: SALES OFFICE Exir Telecom, Isafjordsgatan 22B, SE Kista, Sweden PHONE: FAX: CONTENTS INTRODUCTION CONNECTORS JUMPER CABLES EMP & GROUNDING CABLE CLAMPS POWER SPLITTERS & TAPPERS COMBINERS TMA ABSORBERS INFO: info@exirtelecom.com ORDER: order@exirtelecom.com WEB: ORDER AND INFO Ordering products from Exir Telecom is easy. Orders can be placed directly via telephone, fax or to our Head Office, or through our sales representatives. Visit Exir Telecom s website for updated product specifications, mounting descriptions, show dates and much more. This catalogue replaces our prior catalogue edition, Telecom Products #04. While all efforts have been made to provide accurate specifications at time of printing, Exir Telecom is not responsible for any errors or omissions in this catalogue. All specifications are subject to change without prior notice and neither Exir Telecom nor its employees may be held responsible for discrepancies between the printed specifications and those actually in effect at any given time. Please check actual specifications at before ordering. Exir Broadcasting & Telecom AB, Sweden All rights reserved Exir Broadcasting & Telecom AB

3

4 Introduction and General Information Exir Telecom Exir Telecom is a global technology leader servicing the coaxial and RF industry in both the broadcasting and telecom sectors. Our focus is to develop and manufacture the most innovative, dependable and long-lasting products on the market. Building on tradition At Exir Telecom, our focus has long been on the development and manufacture of innovative, long-lasting RF products offering superior reliability and performance for the worldwide market. Previously Teracom Components, we became Exir Telecom in 2008 after becoming part of the Exir Group. Though our name is new, our products continue to be built with more than 80 years of experience and tradition stretching back to the first RF infrastructures to be built in Sweden. From broadcasting to telecom Based in Hörby, side by side with one of Sweden s primary television and radio broadcasting sites, we evolved together with the broadcasting industry. When cellular networks eventually began to appear, we simply applied our already well-established principles to the new technology, making us an instant supplier of high quality components to the telecom sector. Today our position on the worldwide market continues to grow stronger thanks to the extensive production knowledge and manufacturing capacity available to us as part of the Exir Group. To better serve major telecom operators and OEMs, Exir Telecom s management, marketing and sales functions are now located just outside of Stockholm in Kista, Sweden s Silicon Valley. Where new ideas come first Exir Telecom invests heavily in the development of new ideas and products that will improve the quality and reliability of the world s telecom systems. An excellent example is the first ever easy-to-use, single piece connector that we introduced back in 1998, an innovation that revolutionised the market. By studying problems on-site together with installers, our experienced R&D engineers excel at developing products that simplify installation, improve performance and enhance overall system reliability. Our Philosophy Modern communication places great demands on the systems that process the information being exchanged throughout the world. It goes without saying that these systems must be built with quality products. When developing new technology it is of the utmost importance to understand how this technology will be integrated into our everyday lives. And to understand this, we must be close to the people who use it. It is from this perspective that we view evolving technologies. We stay close to our customers, the universities, the technicians using our products, and to those using our customers own innovations on a daily basis. Only with a clear understanding of the ultimate aim of the technology can we build the finest quality products available. Trusted around the world At Exir Telecom we work together with major international operators, system suppliers and cable manufacturers who have used our products ever since the telecom boom. These companies trust the performance our products deliver, and we are dedicated to maintaining their confidence while creating new, high quality products. The single piece connector and our market leading built-in weatherproofing system are examples of designs that save telecom customers money while providing long-term system stability. Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers 5

5 Unbeatable Advantages with Components from Exir Telecom Introduction Connectors Having been around since long before the dawn of modern telecommunications, Exir Telecom offers far-reaching experience and in-depth knowledge. No External Weather-Proofing HIGH QUALITY O-RINGS Instead of requiring labour-intensive and expensive, external weatherproofing, our connectors provide built-in weather protection through the use of high quality O-rings placed in critical areas inside the products. A connector from Exir Telecom has up to six O-rings to protect against moisture. Even when the cable jacket is damaged, O-rings around the outer conductor prevent moisture and humidity from entering the connector. 10-Year Comprehensive Guarantee EXCEEDS IP68 Our products have been tested for performance in a variety of extreme climatic conditions, from the coldest to the warmest temperatures and at different levels of humidity. Our use of O-rings makes our products in exposed situations, dust-tight and water-pressure proof down to 25 metres / 82 feet. This is equivalent to a pressure of 2.5 bar, a rating which far exceeds the requirements for IP68 classification according to international IEC standards. All Exir Telecom products are designed to maintain a high and uniform level of quality, regardless of climatic conditions. We are so sure of their performance that we offer a comprehensive 10-year guarantee for the majority of our products. Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers 6

6 Introduction Full Cable Compatibility Exir Telecom s single piece connectors are constructed to fit all major cable brands specified on the product pages. Our unique design allows the connector to fit different cable dimensions. Electrical Performance To achieve reliable system performance it is critical that all system components maintain high quality and excellent electrical values time after time. Choosing high quality materials prevents intermodulation and ensures superior conductivity. Contact surfaces are silver-plated to provide excellent conductivity, and for reasons of durability we have avoided soldering in order to eliminate the risk of cracking that can occur in soldered joints over time. To further prevent intermodulation all products are delivered with plastic lids to protect critical areas from dirt and moisture during installation. Simple Installation Procedure Exir Telecom understands the importance of a fast and easy installation process. Our designs are based on years of practical experience and a commitment to developing user-friendly products. To further simplify the installation process all products come with illustrated mounting instructions. Helpful installation videos are also available at www. exirtelecom.com. In addition Exir Telecom offers in-house and on-site installation training that can be customised to your specific needs. Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers 7

7

8 Reliable Connector Design Design Features for Preventing Intermodulation 1 2 SILVER-PLATED CONTACT SURFACES All contact surfaces are silver-plated to achieve maximum conductivity. VIBRATION RESISTANT CONSTRUCTION The double O-rings sealing the outer conductor provide added stability to protect against the wear otherwise caused by cable vibrations. O-Ring Sealing for Guaranteed Water Protection 1 AT CABLE ENTRY 3 O-ring at cable entry prevents water leakage between connector and plastic cable jacket. 2 AROUND OUTER COPPER TUBE 4 Double O-rings prevent leakage between connector and outer conductor HIGH CONTACT PRESSURE ON OUTER CONDUCTOR The connector s mechanical construction allows great pressure to be applied to the area of contact with the cable s outer conductor when tightened around the cable. A specially designed slot keeps the outer conductor of the cable in place. 3 BETWEEN CONNECTOR S FRONT AND BACK PIECES O-ring to prevent moisture migration during installation. INSIDE THE CONNECTOR HEAD A leaking antenna can cause damage throughout the system. O-rings at the connector head stop such water leakage and protect the rest of the system from further damage. Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers 9

9 How our built-in sealing system saves you money in the long run One of the most common causes of failure at telecom sites is water leakage. Installers must therefore go to great lengths to seal connectors by taping and applying other weatherproofing materials. But with products from Exir Telecom, installers never need to tape our connectors. This make installation, which is often performed under adverse conditions like hanging from a tower while exposed to winds, much easier and faster. As a result, our products represent the most economically sound investment you can make. HERE S HOW Sven-Åke Karlsson of Växjö Radio Systems spells it out in simple terms: A typical site may have as many as 24 connectors or more, so obviously we save a lot of time, and therefore money, by not having to worry about taping. Since we began to use Exir Telecom waterproof connectors in 1994, we have not had a single problem with water damage, says Sven-Åke Karlsson. Växjö Radio Systems has been working with products from Exir Telecom for many years. Without tape, says Karlsson, not only the initial installation but future service of the site as well is performed much more quickly and easily. Exir Telecom s products are completely waterproof thanks to a unique system of O-rings that seal out water at all critical points within the connector. Manufacturing components in this manner does make them somewhat more expensive in comparison to less sophisticated products. However, the savings achieved through reduced installation time, the elimination of external sealing materials and the avoidance of rebuilds or service due to water damage more than compensate for this added expense. RE-TAPE/RE-DO WEATHERPROOFING WHEN SEALS BEGIN TO DETERIORATE COST OF WEATHERPROOFING MATERIAL/TAPE TIME CONSUMPTION WORK TO SEAL CONNECTIONS INSTALLATION COST EQUIPMENT COST SIMPLE PRODUCTS REQUIRING EXTERNAL WEATHERPROOFING Money Saved INSTALLATION COST EQUIPMENT COST EXIR TELECOM PRODUCTS WITH BUILT-IN SEALING SYSTEM Thanks to Exir Telecom s waterproof system featuring built-in O-rings, you will never need to use any external sealing with our products. This saves you time and money by: 1 eliminating the need to purchase and apply external weatherproofing materials 2 avoiding having to undo weatherproofing in order to take sweep measurements, and 3 not having to return to the site to repair leaking connections caused by faulty weatherproofing. As Exir Telecom s products are built to last a minimum of 25 years, no maintenance is necessary. The added costs of tape, combined with the increased costs of more frequent breakdowns, service, etc, may be marginal when considering a single site, but multiply these costs by 100 or even by 1000 sites, and the expense becomes far more sizeable. 10

10 Introduction SNOW AND ICE HUMIDITY AND HEAVY RAIN HOW WE STOP WATER FROM GETTING IN With simpler products there is a sizeable risk that water and moisture will enter into the antenna system. This can occur in various ways, the most likely of which being through poorly sealed connectors, jumper cables or grounding kits. External sealants do not protect against moisture that migrates within the feeder system. Water that collects in antenna panels or amplifiers can travel down through the system if the connector interface is not waterproof. Should a crack or hole appear in the feeder cable s plastic jacket, water will enter and travel along the outer conductor to nearby connectors. Exir Telecom s built-in O-ring system prevents migration of this kind from occurring inside antenna lines. FROM THE COLDEST TO THE WARMEST CLIMATIC CONDITIONS Exir Telecom s products are developed to withstand all climatic conditions. They have been designed primarily for the harsh Scandinavian climate, made to function in the freezing cold of near Arctic winters. Our products have been tested for performance in a variety of extreme climatic conditions, from the coldest to the warmest temperatures and at various humidity levels. They are also proven to be dust-tight and able to withstand the pressure of desert installation. Products from Exir Telecom are designed to operate problem-free for a minimum of 25 years without any maintenance or any external DUST AND SAND STORMS SALT WATER AND STRONG WINDS sealing. Our products have built-in weather protection consisting of O-ringsmade of EPDM. These O-rings feature completely seamless surfaces, superior workability of the sealing under extreme climatic actions and very good resistance to climatic changes, ozone and UVradiation. O-rings of this type are used in the most demanding and highly critical applications including nuclear power plants, military uses and various medical equipment. As our products require no external sealing whatsoever, you will never have to worry about the unnecessary cost, time-consumption and annoyance of taping ever again. EXCEEDS IP 68 The International Standards IP Protection Classification established by IEC (International Electrotechnical Commission) provides a system for specifying enclosures of electrical equipment on the basis of the degree of protection required. In order to be awarded IP68 classification a product must be able to withstand a water pressure of 0.1 bar for 30 minutes. This corresponds to a depth one metre of water. Exir Telecom s products for exposed situations have been successfully tested to withstand 2.5 bar. This means that they can safely operate at depths of 25 metres under water, which far exceeds the requirements of the international IP68 standard. Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers 11

11 Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers

12 On-site Training Keeping your workforce up to date with the rapid advancements in today s mobile telephone technology requires a commitment to continuous training. But can you afford the time it takes for installers to attend training courses when there are deadlines to be met? Exir Telecom recognises these pressures, which is why we have developed a series of flexible, on-site training courses designed to fit around your work schedule - not ours. This increasingly popular training option minimises lost time travelling to an off-site venue, and allows installers to conveniently update their skills at their place of work even if the network is being constructed at several sites simultaneously. A typical connector installation course lasts half a day and can accommodate up to eight participants. Our on-site training scheme is actually a series of related courses which focus on the practical aspects of working with connectors and cables. This is a vitally important area, as incorrectly installed connectors can result in major power dissipation. In simple terms, doing the job right the first time results in the highest level of cost efficiency in the long run. HANDS-ON TRAINING FOR EVERYONE All of our instructors have extensive hands-on experience working with mobile telephony networks in a variety of situations. This means they are capable of answering questions on both a theoretical and practical level. During our Connector Installation Course all participants are given the opportunity to install each of the connector types available in our program. Our qualified instructors are on hand to answer questions and to lend a helping hand when needed. They also check each installation to ensure that it meets the required standards of workmanship. All participants receive a personalised certificate of achievement upon successful completion of our courses. LEARN MORE AT EXIR TELECOM EXAMPLES OF COURSES CONNECTOR INSTALLATION COURSE Basic course covering techniques for proper connector installation. INTRODUCTORY COURSE This course provides introductory theory and practical training relating to such areas as planning and building fully operational antenna lines for cellular telephony. ADVANCED COURSE This course offers an in-depth look into various aspects of RF as well as examines essential issues when planning and building fully operational antenna lines For more detailed information regarding courses, please contact our head office at: or visit: Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers Exir Telecom also holds advanced, 5-day courses geared primarily to technical supervisors, purchasers and project managers. 13

13 Connectors Exir Telecom s connectors offer many built-in advantages, such as an expanding inner conductor for superior electrical performance, longer body construction for reduced stress on cables, and advanced weather protection features which completely eliminate the need for putty tape or any other external weatherproofing. All of our products have been tested in extreme climatic conditions. Our connectors are fast and easy to install, and are fully compatible with all major cable brands. 1/2 Flexible Foam Dielectric 1/2 Flexible Foam Dielectric Right Angle 1/2 Foam Dielectric- Tighten Inner Conductor 1/2 Foam Dielectric - Contact Springs 1/2 Foam Dielectric Right Angle 7/8 Foam Dielectric - Contact Springs 7/8 Foam Dielectric - Expanding Inner Conductor 1 1/4 Foam Dielectric 1 5/8 Foam Dielectric Panel Socket DIN 7/16 Tools for Foam and Superflex Connectors

14 Connectors 1/2 Flexible Foam Dielectric Reusable Auto-flaring for faster installation 10-year comprehensive warranty IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pressure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 1/2" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Acome HPL 50-1/2 SF Andrew FSJ4-50B Cablewave S-FLC 12 Condumex RF 1/2-50 SF Eupen /2 Hiflex Leoni FlexLine 1/2 S NK Cables RFF 1/2"-50 RFS Cellflex SCF12-50J INTERMODULATION* 2 x 20 W transmitter < -156 dbc CONNECTING TIME 5-6 min WEIGHT 190 g (0.42 lb) DIAMETER 27 mm (1.06 in) LENGTH 76 mm (2.99 in) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 25 TOOL KIT CONK-S012-B0 NM-S012-A0 716M-S012-A0 NF-S012-A0 716F-S012-A0 ARTICLE NM-S012-A0 NF-S012-A0 716M-S012-A0 716F-S012-A0 CONNECTOR N male N female DIN 7/16 male DIN 7/16 female * During intermodulation measurement attached cables are exposed to shock and vibration. 15 Revision A

15 Connectors 1/2 Flexible Foam Dielectric Right Angle Reusable Auto-flaring for faster installation 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pressure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 1/2" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Acome HPL 50-1/2 SF Andrew FSJ4-50B Cablewave S-FLC 12 Condumex RF 1/2-50 SF Eupen /2 Hiflex NK Cables RFF 1/2"-50 RFS Cellflex SCF12-50J INTERMODULATION* 2 x 20 W transmitter <-156 dbc CONNECTING TIME 5-6 min WEIGHT 300 g (0.66 lb) DIAMETER 27 mm (1.06 in) LENGTH 67 mm (2.64 in) WIDTH 62 mm (2.44 in) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 25 TOOL KIT CONK-S012-B0 NM-S012-B0 716M-S012-B0 NF-S012-B0 716F-S012-B0 ARTICLE NM-S012-B0 NF-S012-B0 716M-S012-B0 716F-S012-B0 CONNECTOR N male right angle N female right angle DIN 7/16 male right angle DIN 7/16 female right angle * During intermodulation measurement attached cables are exposed to shock and vibration. 16 Revision A

16 1/2 Foam Dielectric- Tighten Inner Conductor Connectors 1/2 Foam Dielectric - Tighten Inner Conductor Reusable 10-year comprehensive warranty Auto-flaring for faster installation IP68-classified and water-pressure proof tested down to 25 m No need for amalgamating tape or other external weatherproofing High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pressure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 1/2" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Andrew LDF4-50 NK Cables RFA 1/2-50 Cellflex LCF 1/2 Cu2Y RFS LCF 1/2-50 Cu2Y Cablewave FLC 12 Eupen 5128 Acome HPL 50-1/2 flex Leoni FlexLine 1/2 R Condumex RF 1/2-50 INTERMODULATION* 2 x 20 W transmitter < -156 dbc CONNECTING TIME 2-3 min WEIGHT 190 g (0.42 lb) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 25 TOOL-KIT CONK-F012-G0 (std.) CONK-F012-F0 (basic) NM-F012-G1 716M-F012-G1 NF-F012-G1 716F-F012-G1 ARTICLE 00NM-F012-G1 00NF-F012-G1 716M-F012-G1 716F-F012-G1 CONNECTOR N male N female DIN 7/16 male DIN 7/16 female DIAMETER 27 mm (1.06 in) 27 mm (1.06 in) 34 mm (1.34 in) 29 mm (1.14 in) LENGTH 81.5 mm (3.21 in) 79.5 mm (3.13 in) 71 mm (2.79 in) 71 mm (2.79 in) * During intermodulation measurement attached cables are exposed to shock and vibration. Revision B 17

17 Connectors 1/2 Foam Dielectric - Contact Springs Reusable Auto-flaring for faster installation 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pre sure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 1/2" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Andrew LDF4-50 NK Cables RFA 1/2"-50 Cellflex LCF 1/2" Cu2Y RFS LCF 1/2"-50 Cu2Y Cablewave FLC 12 Eupen 5128 Acome HPL 50-1/2 flex Leoni FlexLine 1/2 R Condumex RF 1/2-50 INTERMODULATION* 2 x 20 W transmitter < -156 dbc CONNECTING TIME 2-3 min WEIGHT 190 g (0.42 lb) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 25 TOOL-KIT CONK-F012-H0 (std.) CONK-F012-F0 (basic) 00NM-F012-H1 716M-F012-H1 00NF-F012-H1 716F-F012-H1 ARTICLE 00NM-F012-H1 00NF-F012-H1 716M-F012-H1 716F-F012-H1 CONNECTOR N male N female DIN 7/16 male DIN 7/16 female DIAMETER 27 mm (1.06 in) NM 27 mm (1.06 in) NF 34 mm (1.34 in) 7/16m 29 mm (1.14 in) 7/16f LENGTH 68 mm (2.68 in) NM 66 mm (2.60 in) NF 57 mm (2.25 in) 7/16m 55 mm (2.17 in) 7/16f * During intermodulation measurement attached cables are exposed to shock and vibration. 18 Revision B

18 Connectors 1/2 Foam Dielectric Right Angle Reusable Auto-flaring for faster installation 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pre sure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 1/2" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Andrew LDF4-50 NK Cables RFA 1/2"-50 Cellflex LCF 1/2" Cu2Y RFS LCF 1/2"-50 Cu2Y Cablewave FLC 12 Eupen 5128 Acome HPL 50-1/2 flex Leoni FlexLine 1/2 R Condumex RF 1/2-50 INTERMODULATION* 2 x 20 W transmitter < -156 dbc CONNECTING TIME 2-3 min WEIGHT 180 g (0.40 lb) DIAMETER 25 mm (1.06 in) LENGTH 60 mm (2.36 in) WITH 49.5 mm (1.95 in) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 25 TOOL-KIT CONK-F012-G0 (std.) CONK-F012-F0 (basic) 00NM-FO12-AI00 716M-F012-AI00 ARTICLE 00NM-FO12-AI00 716M-F012-AI00 CONNECTOR N male right angle DIN 7/16 male right angle * During intermodulation measurement attached cables are exposed to shock and vibration. Revision A 19

19 Connectors 7/8 Foam Dielectric - Contact Springs Reusable 10-year comprehensive warranty Auto-flaring for faster installation No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pre sure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 7/8" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Acome HPL 50-7/8 flex Acome HPL 50-7/8 LA Acome M5423 7/8 UP Andrew AVA5-50 Andrew LDF5-50A Cablewave FLC 78 Cellflex LCF 7/8 Cu2Y Cellflex LCF78-50JA Condumex RF 7/8-50 Eupen 5228 Eupen 5228A EC5-50A Leoni FlexLine 7/8 R NK Cables RF 7/8"-50 NK RFA 7/8 Tsvetlit PK C 7/8"R HANSEN 7/8" INTERMODULATION* 2 x 20 W transmitter < -156 dbc CONNECTING TIME 2-3 min WEIGHT 180 g (0.40 lb) DIAMETER 39.5 mm (1.56 in) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 25 TOOL KIT CONK-F078-AJ00 00NM-F078-AF00 716M-F078-AF00 00NF-F078-AF00 716F-F078-AF00 ARTICLE 00NM-F078-AF00 00NF-F078-AF00 716M-F078-AF00 716F-F078-AF00 CONNECTOR N male N female DIN 7/16 male DIN 7/16 female LENGTH 73 mm (2.87 in) NM 71 mm (2.80 in) NF 62 mm (2.44 in) 7/16m 60 mm (2.36 in) 7/16f * During intermodulation measurement attached cables are exposed to shock and vibration. 20 Revision B

20 Connectors 7/8 Foam Dielectric - Expanding Inner Conductor Reusable Expanding inner conductor Auto-flaring for faster installation 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pre sure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 7/8" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Acome HPL 50-7/8 flex Acome HPL 50-7/8 LA Acome M5423 7/8 UP Andrew AVA5-50 Andrew LDF5-50A Cablewave FLC 78 Cellflex LCF 7/8 Cu2Y Cellflex LCF78-50JA Condumex RF 7/8-50 Eupen 5228 Eupen 5228A EC5-50A Leoni FlexLine 7/8 R NK Cables RF 7/8"-50 NK RFA 7/8 Tsvetlit PK C 7/8"R HANSEN 7/8" INTERMODULATION* 2 x 20 W transmitter < -156 dbc CONNECTING TIME 2-3 min WEIGHT 180 g (0.40 lb) DIAMETER 39.5 mm (1.56 in) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 25 TOOL KIT CONK-F078-AJ00 00NM-F078-AG00 716M-F078-AG00 00NF-F078-AG00 716F-F078-AG00 ARTICLE 00NM-F078-AG00 00NF-F078-AG00 716M-F078-AG00 716F-F078-AG00 CONNECTOR N male N female DIN 7/16 male DIN 7/16 female LENGTH 73 mm (2.87 in) NM 71 mm (2.80 in) NF 62 mm (2.44 in) 7/16m 60 mm (2.36 in) 7/16f * During intermodulation measurement attached cables are exposed to shock and vibration. Revision B 21

21 Connectors 1 1/4 Foam Dielectric Reusable Auto-flaring for faster installation 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pressure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 1 1/4" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Acome HPL /4 flex Andrew LDF6-50 Cablewave FLC 114 Cellflex LCF 1 1/4 Cu2Y Condumex RF 1 1/4-50 Eupen 5328 Eupen Hiflex EC6-50-HF Leoni FlexLine 1 1/4 R NK Cables RFA 1 1/4"-50 RFS LCFS114-50JA INTERMODULATION* 2 x 20 W transmitter < -156 dbc CONNECTING TIME 3-4 min WEIGHT 700 g (1.54 lb) DIAMETER 51 mm (2 in) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 20 TOOL KIT CONK-F114-AB00 00NM-F114-AD00 716M-F114-AD00 00NF-F114-AD00 716F-F114-AD00 ARTICLE 00NM-F114-AD00 00NF-F114-AD00 716M-F114-AD00 716F-F114-AD00 CONNECTOR N male N female DIN 7/16 male DIN 7/16 female LENGTH 110 mm (4.33 in) NM 108 mm (4.25 in) Nf 98 mm (3.86 in) 7/16m 97 mm (3.82 in) 7/16f * During intermodulation measurement attached cables are exposed to shock and vibration. 22 Revision A

22 Connectors 1 5/8 Foam Dielectric Reusable Auto-flaring for faster installation 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m High quality O-rings on outer conductor and cable jacket ensure functional integrity even after accidental damage to cable jacket Designed to maintain high pressure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE FORMAT 1 5/8" CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db CABLE COMPATIBILITY Acome HPL flex Andrew AVA7-50 Andrew LDF7-50A Cablewave FLC 158 Cellflex LCF 1 5/8" Cu2Y Condumex RF 1 5/8-50 Leoni FlexLine 1 5/8 R NK Cables RFA 1 5/8"-50 RFS LCF158-50JA INTERMODULATION* 2 x 20 W transmitter < -156 dbc CONNECTING TIME 3-4 min WEIGHT 1100 g (2.42 lb) DIAMETER 65 mm (2.48 in) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 10 TOOL KIT CONK-F158-AC00 00NM-F158-AD00 716M-F158-AD00 00NF-F158-AD00 716F-F158-AD00 ARTICLE 00NM-F158-AD00 00NF-F158-AD00 716M-F158-AD00 716F-F158-AD00 CONNECTOR N male N female DIN 7/16 male DIN 7/16 female LENGTH 138 mm (5.43 in) NM 135 mm (5.32 in) NF 125 mm (4.92 in) 7/16m 124 mm (4.88 in) 7/16f * During intermodulation measurement attached cables are exposed to shock and vibration. Revision A 23

23 Panel Socket Panel Socket DIN 7/16 Customising possibilities 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m Designed to maintain high pressure on contact surfaces to reduce intermodulation COMMON FOR BOTH CONNECTOR OPERATING FREQUENCY MHz VSWR / RETURN LOSS MHz / -35 db MHz / -30 db INTERMODULATION* 2 x 20 W transmitter < -156 dbc OPERATING TEMPERATURE -55 C to +80 C DIMENSIONS 21 x 32 x 32 mm H x W x D (0.86 x 1.25 x 1.25 in) 716M-PANF-B0 716F-PANF-B0 ARTICLE 716M-PANF-B0 716F-PANF-B0 CONNECTOR DIN 7/16 male DIN 7/16 female * During intermodulation measurement attached cables are exposed to shock and vibration. 24 Revision A

24 RF Adapters 7/16 DIN and N PRODUCT PROFILE Exir Telecom s RF Adapters are developed for digital cellular applications such as GSM, TETRA, 3G and CDMA systems. These adapters are developed to be used in combination with our RF connectors for optimal performance level. Exir Telecom RF adapters are designed to operate under harsh climatic conditions with excellent overall performance. The silver-plating ensures the finest protection against any kind of corrosion. The RF Adapters are available in all 7/16 DIN and N - male and female combinations. GENERAL SPECIFICATION FREQUENCY RANGE MHz IMPEDANCE 50 Ohm VSWR / RETURN LOSS 1.04 / -34 db INTERMODULATION 2x20 W transmitter -165 dbc OPERATING TEMPERATURE -40 C to +85 C, -40 C to +185 F SEALING Passed the IPX8 test PLATING Silver-plated ARTICLE NO 7/16M-7/16M AG/AG /16M-7/16F AG/AG /16M-NM/50 AG/AG /16M-NF/50 AG/AG /16F-7/16F AG/AG /16F-NF/50 AG/AG NM/50-7/16F AG/AG NM/50-NM/50 AG/AG NM/50-NF/50 AG/AG NF/50-NF/50 AG/AG Revision B 25

25 Cable Preparation Tools for Cable Connectors PRODUCT PROFILE Exir Telecom s tool kits are designed to enable fast installation of our connectors. Tools can be ordered separately or in kits. All connectors and tool kits are delivered with illustrated mounting instructions. Exir Telecom also offers courses in connector installation. ARTICLE KIT-BAG CONTENTS CONNECTORS CONK-S012-B0 Cable peeler, cable holders, inner conductor tightener (with torque) and flaring tool, open xxxx-s012-a0 wrenches, wrench for N and DIN 7/16, silicone gasket protector, N to DIN 7/16 adapter, brush. xxxx-716m-s012-b0 CONK-F012-G0 Standard Cable peeler, cable holders, inner conductor tightener (with torque) and flaring tool, open wrenches, wrench for N and DIN 7/16, N to DIN 7/16 adapter, brush. xxxx-f012-g1 xxxx-f012-ah00 xxxx-f012-ai00 CONK-F012-H0 Standard Cable peeler, cable holders, flaring tool, open wrenches, wrench for N and DIN 7/16, brush. xxxx-f012-h1 CONK-F012-F0 Basic CONK-F078-AJ00 Standard CONK-F078-G0 Basic Cable peeler, inner conductor tightener, N to DIN 7/16 adapter. Cable peeler, cable holders, open wrenches, wrench for N and DIN 7/16, brush, razor blades, inner conductor tightener 7/16, N to DIN 7/16 adapter. xxxx-f012-g1 xxxx-f012-h1 xxxx-f012-ah00 xxxx-f012-ai00 xxxx-f078-ae02 xxxx-f078-af00 xxxx-f078-ag00 xxxx-f078-ae02 xxxx-f078-af00 xxxx-f078-ag00 Cable peeler, inner conductor tightener, N to DIN 7/16 adapter. CONK-F114-AB00 Cable peeler, cable holders, hook spanners, wrench for N and DIN 7/16, brush, cutting jig. xxxx-f114-ad00 CONK-F158-AC00 Cable peeler, cable holders, hook spanners, wrench for N and DIN 7/16, brush, cutting jig. xxxx-f158-ad00 Revision A 25

26 Tools Tools for Foam and Superflex Connectors CABLE PEELER PEEL-S012-B0 1/2 flexible PEEL-F012-F0 1/2 PEEL-F078-G0 7/8 PEEL-F114-A0 1 1/4 PEEL-F158-A0 1 5/8 INNER CONDUCTOR STRAINERS AND FLARING TOOLS ISFL-S012-B0 1/2 flexible FLAT-F012-H0 1/2 H1 ISFL-F012-B0 1/2 G1 ICST-7160-C0* 7/16 without torque CUTTING JIGS CJIG-F114-A1 1 1/4 CJIG-F158-A1 1 5/8 OPEN WRENCHES OCST-S012-A1 1/2 flexible OCST-F012-H0 1/2 H1 OCST-S012-A1 1/2 G1 OCST-F078-B0 7/8 WRENCH OCST-N716-A1 N and DIN 7/16 SPANNERS /4 and 1 5/8 CABLE HOLDERS CABH-0012-A1 1/2 flexible CABH-F012-A1 1/2 CABH-0078-A1 7/8 CABH-0114-A1 1 1/4 CABH-0158-A1 1 5/8 RAZOR BLADES Big for 7/8 10 pieces Small for 1/2, 1 1/4, 1 5/8 ADAPTER ICST-000N-A1 N to DIN 7/16 SILICONE GASKET PROTECTOR CONT-S012-A1 1/2 flexible SILICONE GREASE Silicone grease BRUSH Plastic brush 26 Revision A

27 Jumper Cables Jumper cables are available in any length and offer a generous bending radius. Exir Telecom s jumper cables are water-pressure proof down to 25 metres, which is equivalent to a pressure of 2.5 bar and far exceeds the requirements for IP68- classification. Consequently there is no need for tape or any other external weatherproofing Every cable is tested and can as an option come individually labelled with the results to identify its measured return loss performance within the MHz range. 1/2 Foam Dielectric Cable 1/2 Superflexible Foam Dielectric Cable 1/2 Superflexible Foam Dielectric Cable - Angle Connector 1/2 Superflexible Foam Dielectric Cable - Reusable Connector

28 Jumper Cables 1/2 Foam Dielectric Cable 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m Designed to maintain high pressure on contact surfaces to reduce intermodulation Each cable individually tested an labelled with return loss graph, MHz COMMON FOR ALL CABLE TYPE 1/2" FREQUENCY RANGE MHz VSWR / RETURN LOSS MHz 1.08 / -28 db (-35 db)* MHz 1.10 / -26 db (-35 db)* INTERMODULATION** 2 x 20 W transmitter < -156 dbc OPERATING TEMPERATURE -55 C to +80 C DIN 7/16 TO DIN 7/16 ARTICLE JBB0-F012-ABxx*** JAB0-F012-ABxx DIN 7/16 TO N ARTICLE JBD0-F012-ABxx JAD0-F012-ABxx N TO N ARTICLE JDD0-F012-ABxx JCD0-F012-ABxx CONNECTORS DIN 7/16 male to DIN 7/16 male DIN 7/16 female to DIN 7/16 male CONNECTORS DIN 7/16 male to N male DIN 7/16 female to N male CONNECTORS N male to N male N female to N male * Typical return loss connector. ** During intermodulation measurement attached cables are exposed to shock and vibration. *** XX is the lenght of the cable. For example: AB05=0.5 m, AB10=1.0 m. 28 Revision A

29 Jumper Cables 1/2 Superflexible Foam Dielectric Cable Each cable individually tested 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m Designed to maintain high pressure on contact surfacces to reduce intermodulation COMMON FOR ALL CABLE TYPE 1/2" Superflex FREQUENCY RANGE MHz VSWR / RETURN LOSS MHz 1.12 / -25 db* INTERMODULATION** 2 x 20 W transmitter < -160 dbc OPERATING TEMPERATURE -55 C to +80 C DIN 7/16 TO DIN 7/16 ARTICLE JBB0-S012-ACxx*** JAB0-S012-ACxx DIN 7/16 TO N ARTICLE JBD0-S012-ACxx JBC0-S012-ACxx N TO N ARTICLE JDD0-S012-ACxx JCC0-S012-ACxx CONNECTORS DIN 7/16 male to DIN 7/16 male DIN 7/16 female to DIN 7/16 male CONNECTORS DIN 7/16 male to N male DIN 7/16 male to N female CONNECTORS N male to N male N female to N female * Typical performance for jumpers of ordinary length. ** During intermodulation measurement, cables were exposed to shock and vibration. *** XX is the lenght of the cable. For example: AC05=0.5 m, AC10=1.0 m. Revision A 29

30 Jumper Cables 1/2 Superflexible Foam Dielectric Cable - Angle Connector Angle Connector COMMON FOR ALL CABLE TYPE 1/2" Superflex FREQUENCY RANGE MHz VSWR / RETURN LOSS MHz 1.12 / -25 db* INTERMODULATION** 2 x 20 W transmitter < -160 dbc OPERATING TEMPERATURE -55 C to +80 C DIN 7/16 TO DIN 7/16 ARTICLE JBA1-S012-ACxx*** JBB1-S012-ACxx JBC1-S012-ACxx JBD1-S012-ACxx JDA1-S012-ACxx JDB1-S012-ACxx JDC1-S012-ACxx JDD1-S012-ACxx 1/2 Superflexible Foam Dielectric Cable - Angle Connector ANGLE CONNECTOR CONNECTORS DIN 7/16 male angle to DIN 7/16 female DIN 7/16 male angle to DIN 7/16 male DIN 7/16 male angle to N female DIN 7/16 male angle to N male N male angle to DIN 7/16 female N male angle to DIN 7/16 male N male angle to N female N male angle to N male Each cable individually tested 10-year comprehensive warranty Outstanding VSWR and IM values No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m * Typical performance for jumpers of ordinary length. ** During intermodulation measurement, cables were exposed to shock and vibration. *** XX is the lenght of the cable. For example: AC05=0.5 m, AC10=1.0 m. 30 Revision B

31 Jumper Cables 1/2 Superflexible Foam Dielectric Cable - Reusable Connector Reusable Connectors 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m Each cable individually tested an labelled with return loss graph, MHz Designed to maintain high pressure on contact surfaces to reduce intermodulation COMMON FOR ALL CABLE TYPE 1/2" FREQUENCY RANGE MHz VSWR / RETURN LOSS MHz 1.08 / -28 db MHz 1.10 / -26 db* INTERMODULATION** 2 x 20 W transmitter < -156 dbc OPERATING TEMPERATURE -55 C to +80 C DIN 7/16 TO DIN 7/16 ARTICLE JAB0-S012-AAxx*** JBB0-S012-AAxx JBB1-S012-AAxx DIN 7/16 TO N ARTICLE JBD0-S012-AAxx JAD0-S012-AAxx JBC0-S012-AAxx JBD1-S012-AAxx JDB1-S012-AAxx N TO N ARTICLE JDD0-S012-AAxx JCD0-S012-AAxx JDD1-S012-AAxx 1/2 Superflexible Foam Dielectric Cable - Reusable Connector CONNECTORS DIN 7/16 female to DIN 7/16 male DIN 7/16 male to DIN 7/16 male DIN 7/16 male right angle to DIN 7/16 male CONNECTORS DIN 7/16 male to N male DIN 7/16 female to N male DIN 7/16 male to N female DIN 7/16 male right angle to N male DIN 7/16 male to N male right angle CONNECTORS N male to N male N female to N male N male right angle to N male * Typical performance for jumpers of ordinary length. ** During intermodulation measurement attached cables are exposed to shock and vibration. *** XX is the lenght of the cable. For example: AA05=0.5 m, AA10=1.0 m. Revision A 31

32 EMP & Grounding Exir Telecom s EMP protectors and grounding kits protect telecom sites from lightning strikes and surges that damage equipment and cause system breakdown. The products have been tested with a lightning pulse of 50 ka, 10/350 ms, and have passed without sustaining any damage or loss of performance. Thanks to our O-ring protection system, the grounding kits are water-pressure proof down to 25 metres, which is equivalent to a pressure of 2.5 bar and far exceeds the requirements for IP68-classification. Consequently there is no need for tape or any other external weatherproofing. EMP Protectors, Triple Band EMP Protectors, Gas discharge tube, DC-3000 MHz EMP Protectors, Short circuit, MHz Grounding Kits, Lightning Protection for Foam Dielectric Cables Tool Kits Grounding Kit, Lightning Protection for 1/2 Superflexible Foam Dielectric Cable External Grounding Kits - Lightning Protection for Connectors DC Blockers, , MHz DC Blockers, MHz

33 EMP Protectors Triple Band EMP Protectors, Triple Band 10-year comprehensive warranty Designed to maintain high pressure oncontact surfaces to reduce intermodulation IP68-classified and water-pressure proof tested down to 25 m No need for amalgamating tape or other external weatherproofing COMMON FOR ALL FREQUENCY RANGE MHz MHz VSWR / RETURN LOSS MHz 1.17 / -22 db MHz 1.12 / -25 db MHz 1.12 / -25 db INTERMODULATION* 2 x 20 W Tx < -156 dbc IMPEDANCE 50 ohm SURGE CURRENT 100 ka HANDLING CAPABILITY (test pulse 8/20 µs) ENERGY test pulse 4 kv 1.2/50 µs test pulse 2 ka 8/20 µs WEIGHT 560 g (1.23 lb) DIMENSIONS 30 x 40 x 110 mm H x W x D (1.17 x 1.56 x 4.29 in) OPERATING TEMP. -55 C to +80 C PIECES IN BOX 25 MOUNTING BRACKET The EMP protector is available with grounding bracket for mounting directly on grounding bars on request. ARTICLE EMPP-0822-AA00 EMPP-0822-AB00 EMPP-0822-AC00 EMPP-0822-AD00 CONNECTORS DIN 7/16 female to RX/TX - DIN 7/16 male to RX/TX - N female to RX/TX - N male to RX/TX - DIN 7/16 male to antenna DIN 7/16 female to antenna N male to antenna N female to antenna INPUT POWER 600 W 600 W 150 W 150 W * During intermodulation measurement attached cables are exposed to shock and vibration. 33 Revision A

34 EMP Protectors Gas discharge tube, DC MHz COMMON FOR ALL FREQUENCY RANGE DC MHz VSWR / RETURN LOSS 1.22 / -20 db IMPEDANCE 50 ohm DISCHARGE VOLTAGE 90 V* IMPULSE DISCHARGE CURRENT 1 impulse (8/20 µs) 20 ka 5 impulses (8/20 µs) in 3 min 10 ka IMPULSE SPARK OVER VOLTAGE <700 V (1 kv/µs) WEIGHT 350 g (0.8 lb) DIMENSIONS 68 x 34 x 34 mm H x W x D (2.67 x 1.33 x 1.33 in) OPERATING TEMP. -55 C to +80 C * 230, 470 and 600 V available on request EMP Protectors, Gas discharge tube, DC-3000 MHz DC-Pass AISG compliant Made of silver-plated brass Available with grounding cable or bulkhead mounting IP68-classified and water-pressure proof tested down to 25 m No need for amalgamating tape or other external weatherproofing WITH GROUNDING CABLE ARTICLE EMPG-0030-AA00 EMPG-0030-AB00 EMPG-0030-AC00 EMPG-0030-AD00 CONNECTOR 7/16 f - 7/16 f 7/16 f - 7/16 m NF - NF NF - NM BULKHEAD MOUNTING ARTICLE EMPG-0030-AE00 EMPG-0030-AF00 EMPG-0030-AG00 EMPG-0030-AH00 CONNECTOR 7/16 f - 7/16 f 7/16 f - 7/16 m NF - NF NF - NM 34 Revision B

35 EMP Protectors Short circuit, MHz Made of silver-plated brass Protected from both ways 10-year comprehensive warranty EMP Protectors, Short circuit, MHz No need for amalgamating tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m Designed to maintain high pressure on contact surfaces to reduce intermodulation COMMON FOR ALL FREQUENCY RANGE MHz VSWR / RETURN LOSS 1.22 / -20 db INTERMODULATION* 2 x 20 W Transmitter < -156 dbc IMPEDANCE 50 ohm SURGE CURRENT 100 ka HANDLING CAPABILITY Test pulse 8/20 µs ENERGY test pulse 4 kv 1.2/50 µs test pulse 2 ka 8/20 µs WEIGHT 400 g DIMENSIONS 113 x 34 x 34 mm H x W x D (4.44 x 1.33 x 1.33 in) OPERATING TEMP. -55 C to +80 C ARTICLE EMPP-0830-AK00 EMPP-0830-AM00 EMPP-0830-AL00 CONNECTOR 7/16 f - 7/16 M Nf - Nm 7/16 f - 7/16 f INPUT POWER 600 W 150 W 600 W * During intermodulation measurement attached cables are exposed to shock and vibration. Revision B 35

36 Grounding Kits Lightning Protection for Foam Dielectric Cables Reusable Fast and easy installation Large contact surface area Fits multiple cable brands 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m PRODUCT PROFILE Grounding kits from Exir Telecom feature an efficient design enabling multiple units to be mounted very close together. A simple, adjustable construction allows for easy attachment to a wide range of cables from various manufacturers. These grounding kits are reusable and 100% weatherproof without the need for tape or any other external weatherproofing. The contact surfaces are designed to closely fit the corrugated surface of the outer conductor, thus avoiding unnecessary pressure. As a result, the effect of grounding on the VSWR measurement of the antenna line is barely detectable. Grounding Kits, Lightning Protection for Foam Dielectric Cables ARTICLE GROU-F012-AB00 GROU-F078-AB00 GROU-F114-AB00 GROU-F158-AB00 CABLE COMPATIBILITY Andrew LDF4-50 Acome HPL 50-7/8 flex Acome HPL /4 flex Acome HPL flex NK Cables RFA 1/2"-50 Acome HPL 50-7/8 LA Andrew LDF6-50 Andrew AVA7-50 Cellflex LCF 1/2" Cu2Y Acome M5423 7/8 UP Cablewave FLC 114 Andrew LDF7-50A RFS LCF 1/2"-50 Cu2Y Andrew AVA5-50 Cellflex LCF 1 1/4 Cu2Y Cablewave FLC 158 Cablewave FLC 12 Andrew LDF5-50A Condumex RF 1 1/4-50 Cellflex LCF 1 5/8" Cu2Y Eupen 5128 Cablewave FLC 78 Eupen 5328 Condumex RF 1 5/8-50 Acome HPL 50-1/2 flex Cellflex LCF 7/8 Cu2Y Eupen Hiflex EC6-50-HF Leoni FlexLine 1 5/8 R Leoni FlexLine 1/2 R Cellflex LCF78-50JA Leoni FlexLine 1 1/4 R NK Cables RFA 1 5/8"-50 Condumex RF 1/2-50 Condumex RF 7/8-50 NK Cables RFA 1 1/4"-50 RFS LCF158-50JA Eupen 5228 RFS LCFS114-50JA Eupen 5228A EC5-50A Leoni FlexLine 7/8 R NK Cables RF 7/8"-50 NK RFA 7/8 Tsvetlit PK C 7/8"R HANSEN 7/8" GROUND CONN. Cable clip, M5 Cable clip, M5 Cable clip, M5 Cable clip, M5 DIMENSIONS 50 x 25 x 32 mm 50 x 32 x 43 mm 50 x 43 x 57 mm 52 x 54 x 68 mm H x W x D (front view) (1.97 x 0.98 x 1.26 in) (1.97 x 1.26 x 1.69 in) (1.97 x 1.69 x 2.24 in) (2.05 x 2.13 x 2.68 in) CONTACT AREA >25 mm² (0.04 in²) >25 mm² (0.04 in²) >25 mm² (0.04 in²) >25 mm² (0.04 in²) WEIGHT 242 g (0.53 lb) 306 g (0.66 lb) 424 g (0.94 lb) 556 g (1.23 lb) CABLE LENGTH 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in) OPERATING TEMP. -55 C to +80 C -55 C to +80 C -55 C to +80 C -55 C to +80 C TOOL KITS CPKI-0000-C0 CPKI-0000-C0 CPKI-0000-C0 CPKI-0000-C0 36 Revision A

37 Tool Kits Tool Kits PRODUCT PROFILE Tool kits from Exir Telecom provide installers all they need for installing grounding kits quickly and easily. Our grounding devices require only one small opening in the cable jacket in order to function properly. The opening is made using a hot tip cutting tool together with a simple template. Fully illustrated instructions are included with every grounding kit. The complete tool kit includes a cordless, butane powered cutting tool, one spare tip and templates. Additional cutting tools and templates can be ordered separately as needed. Mounting Grounding Kits COMPLETE TOOL KIT ARTICLE CONTENTS CPKI-0000-C1 Cordless, butane powered cutting tool, spare tip and templates for 1/2, 7/8, 1 1/4 and 1 5/8 cables. SINGLE TOOLS ARTICLE CONTENTS EJIG-F012-A0 Template for 1/2 cable EJIG-F078-A0 Template for 7/8 cable GTEM-F114-AA00 Template for 1 1/4 cable GTEM-F158-AA00 Template for 1 5/8 cable Cordless, butane powered cutting tool with spare tip Note: The above photos illustrate the general installation procedure. Please visit for complete instructions on how to install grounding kits from Exir Telecom. Revision A 37

38 Grounding Kit, Lightning Protection for 1/2 Superflexible Foam Dielectric Cable Grounding Kit Lightning Protection for 1/2 Superflexible Foam Dielectric Cable Reusable Fast and easy installation Large contact surface area Fits multiple cable brands 10-year comprehensive warranty PRODUCT PROFILE Grounding kits from Exir Telecom feature an efficient design enabling multiple units to be mounted very close together. A simple, adjustable construction allows for easy attachment to a wide range of cables from various manufacturers. These grounding kits are reusable. The contact surfaces are designed to closely fit the corrugated surface of the outer conductor, thus avoiding unnecessary pressure. As a result, the effect of grounding on the VSWR measurement of the antenna line is barely detectable. ARTICLE GROU-S012-AA00 CABLE COMPATIBILITY Acome HPL 50-1/2 SF Andrew FSJ4-50B Cablewave S-FLC 12 Condumex RF 1/2-50 SF Eupen /2 Hiflex Leoni FlexLine 1/2 S NK Cables RFF 1/2-50 RFS Cellflex SCF12-50J GROUND CONN. Cable clip, M5 CONTACT AREA >20 mm² (0.44 in²) WEIGHT 200 g (0.44 lb) DIMENSIONS 18 x 27 x 34 mm H x W x D (0.71 x 1.06 x 1.34 in) CABLE LENGTH 600 mm (23.64 in) OPERATING TEMP. -55 C to +80 C 38 Revision A

39 External Grounding Kits Lightning Protection for Connectors Reusable Non-corrosive Fast and easy installation Large contact surface area 10-year comprehensive warranty Made of silver-plated brass and stainless steel No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m PRODUCT PROFILE The external grounding kit is designed to be mounted around the connector and to cause the connector itself to function as a grounding device. This solution is very easy to install and provides extra protection at the feeder connector. ARTICLE EXGR-F012-AA00 EXGR-F078-AA00 EXGR-F114-AA00 EXGR-F158-AA00 CONNECTOR xxxx-f012-g1 xxxx-f078-ae02 xxxx-f114-ad00 xxxx-f158-ad00 COMPATIBILITY xxxx-f012-h1 xxxx-f078-af00 xxxx-f078-ag00 CONTACT AREA >25 mm 2 (0.04 in 2 ) >25 mm 2 (0.04 in 2 ) >25 mm 2 (0.04 in 2 ) >25 mm 2 (0.04 in 2 ) CABLE LENGTH 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in) OPERATING TEMP. -55 C to +80 C -55 C to +80 C -55 C to +80 C -55 C to +80 C PIECES IN BOX Revision A 39

40 DC Blockers DC Blockers , MHz Reusable Made of silver-plated brass 10-year comprehensive warranty EPDM O-rings eliminate water intrusion IP68-classified and water-pressurproof tested down to 25 m No need for amalgamating tape or other external weatherproofing ARTICLE DCBL-0900-AA00 DCBL-1722-AA00 CONNECTORS DIN 7/16 male / female DIN 7/16 male / female INPUT POWER 600 W 300 W FREQUENCY RANGE MHz MHz VSWR / RETURN LOSS 1.12 / -25 db 1.12 / -25 db INSERTION LOSS 0.1 db (typical <0.05) 0.15 db (typical 0.1) INTERMODULATION 2 x 20 W transmitter < -156 dbc < -156 dbc IMPEDANCE 50 ohm 50 ohm LENGTH 130 mm (5.12 in) 75 mm (2.95 in) BODY DIAMETER 25 mm (0.98 in) 25 mm (0.98 in) 900 TMA (with built-in DC blocker) DC Blocker Diplexer as a splitter Diplexer as a combiner DC blocker EMP or UMTS 1800 or UMTS 40 Revision A

41 DC Blockers MHz DC Blockers, MHz Made of silver-plated brass EPDM O-rings eliminate water intrusion IP68-classified and water-pressure proof tested down to 25 m No need for amalgamating tape or other external weatherproofing ARTICLE DCBL-0727-AA00 CONNECTORS DIN 7/16 male/female INPUT POWER 300 MHz FREQUENCY RANGE MHz 15 MHz VSWR / RETURN LOSS 20 MHz 0.2 MHz INSERTION LOSS 0.15 MHz INTERMODULATION 2 x 20 W transmitter < -156 dbc IMPEDANCE 50 ohm LENGTH 74 mm (2.91 in) BODY DIAMETER 22 mm (0.97 in) OPERATING TEMPERATURE -20 C to +70 C 42 Revision A

42 Cable Clamps Exir Telecom s cable clamps make cable installation easier, saving you valuable time. Moreover, they provide protection from the damage that high winds inflict upon improperly fastened cables damage that may lead to increased reflection due to mechanical stress. Our cable clamps are manufactured of corrosion resistant stainless steel and are designed to achieve a perfect distribution of pressure on cables. We offer cable clamps for use with flat, round and angle tower members, as well as for wall attachment. Our clamps are convenient to carry and easy to mount - features your installers will appreciate. Cable Clamps for Flat ( mm) and Round (8-23 mm) Tower Members Cable Clamps for 40 mm Angle Tower Members Wall Attachments for Cable Clamps Cable Clamp Single Cable Clamp Double Spring washers prevent over-tightening and distribute the pressure equally over a large cable area Fits flat, round and angle tower members, and are suitable for wall-mounting Available for 1-5 cables Fast and easy to mount with wrench or hex key

43 Cable Clamps Cable Clamps for Flat ( mm) and Round (8-23 mm) Tower Members for Flat ( mm) and Round (8-23 mm) Tower Members Made of stainless steel Various cable dimensions Supports up to 5 cable runs 10-year comprehensive warranty No need for adapters or drilling holes Minimises utilised space on towers, reducing wind load Fast and easy assemblysecured with wrench or hex key Protective interlayers safeguard against cable deformation For use with mm ( in) flat and mm ( in) round members Spring washer assures correct and constant pressure on able and prevents over-tightening STANDARD CLAMPS 1/2 CABLE ARTICLE CABLE NO. OF CABLES CL23-1C012-A0 1/2" 1 CL23-2C012-A0 1/2" 2 CL23-3C012-A0 1/2" 3 CL23-4C012-A0 1/2" 4 CL23-5C012-A0 1/2" 5 7/8 CABLE ARTICLE CABLE NO. OF CABLES CL23-1C078-A0 7/8" 1 CL23-2C078-A0 7/8" 2 CL23-3C078-A0 7/8" 3 CL23-4C078-A0 7/8" 4 CL23-5C078-A0 7/8" 5 1 1/4 CABLE ARTICLE CABLE NO. OF CABLES CL23-1C114-A0 1 1/4" 1 CL23-2C114-A0 1 1/4" 2 CL23-3C114-A0 1 1/4" 3 1 5/8 CABLE ARTICLE CABLE NO. OF CABLES CL23-1C158-A0 1 5/8" 1 CL23-2C158-A0 1 5/8" 2 CL23-3C158-A0 1 5/8" 3 COMBI CLAMPS CREATE YOUR OWN PART NO: CL23-x[y]x[y]x[y] x y=a, b, c* No of cables Cable dimensions* *CABLE DIMENSIONS 6-8 mm a mm b mm c EXAMPLE OF PART NO CL23-2[a]2[b]1[c] Cable clamp holds: 2 x 6-8 mm cable, 2 x mm cable and 1 x mm cable Typical usage examples for combi clamps. Many other variations possible. Contact technical support at support@exirtelecom.com to verify your required configuration. 42 Revision A

44 Cable Clamps Cable Clamps for 40 mm Angle Tower for Members 40 mm Angle Tower Members Made of stainless steel Fast and easy assembly Various cable dimensions Supports up to 5 cable runs Secured with wrench or hex key 10-year comprehensive warranty No need for adapters or drilling holes For use with 40 mm (1.57 in) angle members Minimises utilised space on towers, reducing wind load Protective interlayers safeguard against cable deformation Spring washer assures correct and constant pressure on able and prevents over-tightening STANDARD CLAMPS 1/2 CABLE ARTICLE CABLE NO. OF CABLES CL40-1C012-A0 1/2" 1 CL40-2C012-A0 1/2" 2 CL40-3C012-A0 1/2" 3 CL40-4C012-A0 1/2" 4 CL40-5C012-A0 1/2" 5 7/8 CABLE ARTICLE CABLE NO. OF CABLES CL40-1C078-A0 7/8" 1 CL40-2C078-A0 7/8" 2 CL40-3C078-A0 7/8" 3 CL40-4C078-A0 7/8" 4 CL40-5C078-A0 7/8" 5 1 1/4 CABLE ARTICLE CABLE NO. OF CABLES CL40-1C114-A0 1 1/4" 1 CL40-2C114-A0 1 1/4" 2 CL40-3C114-A0 1 1/4" 3 1 5/8 CABLE ARTICLE CABLE NO. OF CABLES CL40-1C158-A0 1 5/8" 1 CL40-2C158-A0 1 5/8" 2 CL40-3C158-A0 1 5/8" 3 COMBI CLAMPS CREATE YOUR OWN PART NO: CL40-x[y]x[y]x[y] x y=a, b, c* No of cables Cable dimensions* *CABLE DIMENSIONS 6-8 mm a mm b mm c EXAMPLE OF PART NO CL40-2[a]2[b]1[c] Cable clamp holds: 2 x 6-8 mm cable, 2 x mm cable and 1 x mm cable Typical usage examples for combi clamps. Many other variations possible. Contact technical support at support@exirtelecom.com to verify your required configuration. Revision A 43

45 Wall Attachments for Cable Clamps for Cable Clamps Supports up to 15 cable runs Made of stainless steel Fast and easy assembly on any surface, indoor and outdoor Minimses utilised space on walls and eliminates need for cable ladders ARTICLE CABLE NO. OF CABLES CABLE CLAMPS WAAT-0012-A0 1/2" 1 15 pcs CL23-1C012-A0, CL23-2C012-A0, CL23-3C012-A0, CL23-4C012-A0, CL23-5C012-A0 WAAT-0078-A0 7/8" 1 15 pcs CL23-1C078-A0, CL23-2C078-A0, CL23-3C078-A0, CL23-4C078-A0, CL23-5C078-A0 WAAT-0158-A0 1 5/8" 1 9 pcs CL23-1C158-A0, CL23-2C158-A0, CL23-3C158-A0 Extra Interlayers for Cable Clamps NOTE All cable clamps are delivered with the appropriate number of interlayers, however additional interlayers may be ordered as needed. Mounting Cable Clamps 1 Put the clamp around the holder with the cables inside 3 Insert the interlayers between the cables and the holder ARTICLE CABLE Pieces in box CL A1 1/2" 100 CL A1 7/8" 100 CL A1 1 1/4" 100 CL A1 1 5/8" Prepare the interlayers by bending them 4 Tighten the clamp using a wrench or hex key Note: The above photos illustrate the general installation procedure. Please visit for complete instructions on how to install cable clamps from Exir Telecom. 44 Revision A

46 Cable Clamp Single Cable Clamp Single Fast and easy assembly Supports up to 4 cable runs Minimises utilised space on towers, reducing wind load PRODUCT PROFILE Cable clamp single is a unit designed for safe simultaneous fixation of coaxial cables on mountain surface. All components are specially constructed to work as a whole unit to support quick installation. No additional parts for applying are required. All parts are manufactured according to European standards. The clamps are made of environmental protected plastic which provides UV resistance in all environments. STANDARD CLAMPS 1/2 CABLE ARTICLE CABLE NO. OF CABLES CLS0-1C012-A0 1/2" 1 CLS0-2C012-A0 1/2" 2 CLS0-3C012-A0 1/2" 3 CLS0-4C012-A0 1/2" 4 7/8 CABLE ARTICLE CABLE NO. OF CABLES CLS0-1C078-A0 7/8" 1 CLS0-2C078-A0 7/8" 2 CLS0-3C078-A0 7/8" 3 CLS0-4C078-A0 7/8" 4 1 1/4 CABLE ARTICLE CABLE NO. OF CABLES CLS0-1C114-A0 1 1/4" 1 CLS0-2C114-A0 1 1/4" 2 CLS0-3C114-A0 1 1/4" 3 1 5/8 CABLE ARTICLE CABLE NO. OF CABLES CLS0-1C158-A0 1 5/8" 1 CLS0-2C158-A0 1 5/8" 2 CLS0-3C158-A0 1 5/8" 3 Revision A 45

47 Cable Clamp Double Cable Clamp Double Fast and easy assembly Supports up to 8 cable runs Minimises utilised space on towers, reducing wind load PRODUCT PROFILE Cable clamp double is a unit designed for safe simultaneous fixation of coaxial cables on mountain surface. All components are specially constructed to work as a whole unit to support quick installation. No additional parts for applying are required. All parts are manufactured according to European standards. The clamps are made of environmental protected plastic which provides UV resistance in all environments. STANDARD CLAMPS 1/2 CABLE ARTICLE CABLE NO. OF CABLES CLD0-2C012-A0 1/2" 2 CLD0-4C012-A0 1/2" 4 CLD0-6C012-A0 1/2" 6 CLD0-8C012-A0 1/2" 8 7/8 CABLE ARTICLE CABLE NO. OF CABLES CLD0-2C078-A0 7/8" 2 CLD0-4C078-A0 7/8" 4 CLD0-6C078-A0 7/8" 6 CLD0-8C078-A0 7/8" 8 1 1/4 CABLE ARTICLE CABLE NO. OF CABLES CLD0-2C114-A0 1 1/4" 2 CLD0-4C114-A0 1 1/4" 4 CLD0-6C114-A0 1 1/4" 6 46 Revision A

48 Power Splitters & Tappers Exir Telecom s high performance power splitters and tappers are made from solid copper and silver-plated to provide the most consistent and reliable electrical specifications. They are water-pressure proof down to 25 metres, which corresponds to a pressure of 2.5 bar and far exceeds the requirements for IP68-classification. This eliminates the need for tape or any other external weatherproofing. Broadbanded n db-coupler and MHz Power Splitters, Hybrid n db-coupler, MHz Power Splitters, Hybrid 3 db-coupler MHz 3 db Hybrid, MHz 3 db Hybrid, MHz 2-Way Power Splitter, MHz 3-Way Power Splitter, MHz 4-Way Power Splitter MHz Power Splitters, MHz Power Splitters, MHz

49 Tappers Broadbanded n db-coupler and MHz Broadbanded n db-coupler and MHz Extremely small Very low insertion loss Made of silver-plated brass 10-year comprehensive warranty EPDM O-rings eliminate water intrusion IP68-classified and water-pressure proof tested down to 25 m No need for amalgamating tape or other external weatherproofing ARTICLE DBCM-0602-AA00 / DBCM-0602-AA01 CONNECTORS DIN 7/16 female / N female DBCM-0702-AA00 / DBCM-0702-AA01 DIN 7/16 female / N female In DBCM-1002-AA00 / DBCM-1002-AA01 DIN 7/16 female / N female Out ndb DBCM-1302-AA00 / DBCM-1302-AA01 DIN 7/16 female / N female Out DBCM-1502-AA00 / DBCM-1502-AA01 DIN 7/16 female / N female DBCM-2002-AA00 / DBCM-2002-AA01 DIN 7/16 female / N female INPUT POWER 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W PIECES IN BOX As requested / 50 As requested / 50 As requested / 50 As requested / 50 As requested / 50 As requested / 50 FREQUENCY RANGE MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz COUPLING ATTENUATION MHz -9 db (13 % of Pin) -10 db (10 % of Pin) -15 db (3 % of Pin) -17 db (2 % of Pin) -21 db (0.8 % of Pin) -28 db (0.15 % of Pin) MHz -6 db (25 % of Pin) -7 db (20 % of Pin) -10 db (10 % of Pin) -13 db (5 % of Pin) db (3 % of Pin) -20 db (1 % of Pin) OUTPUT PERCENTAGE 25 % / 75 % 20 % / 80 % 10 % / 90 % 5 % / 95 % 3 % / 97 % 1 % / 99 % VSWR / RETURN LOSS MHz 1.5 / 14 db 1.5 / 15 db 1.22 / 20 db 1.12 / 25 db 1.12 / 25 db 1.12 / 25 db MHz 1.5 / 14 db 1.5 / 15 db 1.22 / 20 db 1.12 / 25 db 1.12 / 25 db 1.12 / 25 db INSERTION LOSS db db db db db db IMPEDANCE 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm INTERMODULATION* 2 x 20 transmitter < -156 dbc < -156 dbc < -156 dbc < -156 dbc < -156 dbc < -156 dbc WEIGHT 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) DIMENSIONS 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm H x W x D (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) * During intermodulation measurement attached cables are exposed to shock and vibration. 48 Revision C

50 Power Splitters, Hybrid n db-coupler, MHz Power Splitters Hybrid n db-coupler, MHz Extremely good VSWR Made of silver-plated brass 10-year comprehensive warranty EPDM O-rings eliminate water intrusion No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m COMMON FOR ALL INPUT POWER 700 W FREQUENCY RANGE MHz VSWR / RETURN LOSS 1.06 / -31 db ISOLATION -33 db IMPEDANCE 50 ohm WEIGHT 2000 g (4.4 lb) OPERATING TEMP. -55 C to +80 C DIMENSIONS 135 x 90 x 50 mm H x W x D (5.32 x 3.55 x 1.96 in) COMBINING SIGNALS FROM TWO TX / RXs Out In ARTICLE DBCM-0305-AA00 DBCM-0605-AA00 DBCM-1005-AA00 DBCM-1305-AA00 In In Out Absorber SPLITTING SIGNALS FROM ONE TX / RX Out Absorber SPLITTING SIGNALS FROM TWO TX / RXs In Out Out In CONNECTORS DIN 7/16 female DIN 7/16 female DIN 7/16 female DIN 7/16 female COUPLING ATTENUAT. 3 db ±0.1 6 db ± db ± db ±0.3 OUTPUT PERCENTAGE 50% / 50% 25% / 75% 10% / 90% 5% / 95% Revision A 49

51 Power Splitters, Splitters Hybrid 3 db-coupler MHz Hybrid 3 db-coupler MHz Extremely small Very low insertion loss Made of silver-plated brass 10-year comprehensive warranty EPDM O-rings eliminate water intrusion IP68-classified and water-pressure proof tested down to 25 m No need for amalgamating tape or other external weatherproofing COMMON FOR ALL FREQUENCY RANGE MHz COUPLING ATTENUAT. 3 db ±0.15 OUTPUT PERCENTAGE 50% / 50% RETURN LOSS -25 db ISOLATION -28 db IMPEDANCE 50 ohm WEIGHT 1500 g (3.3 lb) OPERATING TEMP. -55 C to +80 C DIMENSIONS 96 x 95 x 50 mm H x W x D (3.78 x 3.74 x 1.96 in) COMBINING SIGNALS FROM TWO TX / RXs Out In In In Out Absorber SPLITTING SIGNALS FROM ONE TX / RX Out Absorber SPLITTING SIGNALS FROM TWO TX / RXs In Out Out In ARTICLE DBCM-1722-AA01 DBCM-1722-AB01 CONNECTORS DIN 7/16 female N female INPUT POWER 600 W 150 W 50 Revision A

52 3 db Hybrid MHz High Performance High Reliability Low Noise Figure ROHS Compliant IP67-classified 3 db Hybrid, MHz ARTICLE DBCM-0727-AA00 DBCM-0727-AA01 ELECTRICAL FREQUENCY RANGE INSERTION LOSS COUPLING VALUE VSWR ISOLATION POWER HANDLING PIM (3rd Order 2*43dBm) IN/OUT IMPEDANCE MHz ±0.8 db 3.1 db 1.3:1 Max 18 db Min 50 W -150 dbc typical 50 Ohm nominal ENVIRONMENTAL OPERATING TEMPERATURE -20 to +70 C MECHANICAL DIMENSIONS H x W x D HYBRID BRACKET 270 x 64 x 33 mm (10.63 x 2.52 x 1.30 in) 100 x 114 x 12 mm (3.94 x 4.49 x 0.47 in) 270 x 57 x 52 mm (10.63 x 2.24 x 2.04 in) 100 x 114 x 12 mm (3.94 x 4.49 x 0.47 in) RF CONNECTOR N (F) 7/16 (f) FINISH Grey colour epoxy coating Revision B 53

53 3 db Hybrid MHz High Performance High Reliability Low Noise Figure ROHS Compliant IP67-classified ARTICLE DBCM-1727-AA00 DBCM-1727-AA01 ELECTRICAL FREQUENCY RANGE INSERTION LOSS COUPLING VALUE VSWR ISOLATION POWER HANDLING PIM (3rd Order 2*43dBm) IN/OUT IMPEDANCE 3 db Hybrid, MHz MHz ±0.5 db 3.0 db 1.2:1 Max 20 db Min 500 W -150 dbc typical 50 Ohm nominal ENVIRONMENTAL OPERATING TEMPERATURE -20 to +70 C MECHANICAL DIMENSIONS H x W x D HYBRID BRACKET 62 x 154 x 28 mm (2.44 x 6.06 x 1.10 in) 114 x 148 x 12 mm (4.49 x 5.83 x 0.47 in) 270 x 57 x 52 mm (10.63 x 2.24 x 2.04 in) 114 x 148 x 12 mm (4.49 x 5.83 x 0.47 in) RF CONNECTOR N (F) 7/16 (f) FINISH Grey colour epoxy coating 54 Revision B

54 2-Way Power Power Splitter, Splitter MHz MHz Made from silver-plated brass 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m ARTICLE AT2G-716F-AB00 AT2G-00NF-AB00 FREQUENCY RANGE MHz MHz INPUT POWER MHz 1000 W 300 W MHz 700 W 150 W MHz 500 W 100 W CONNECTORS DIN 7/16 female N female INPUTS/OUTPUTS 1/2 1/2 VSWR / RETURN LOSS 1.17 / -22 db 1.17 / -22 db INSERTION LOSS <0.05 db <0.05 db INTERMODULATION 2 x 20 W transmitter < -156 dbc < -156 dbc IMPEDANCE 50 ohm 50 ohm WEIGHT 500 g (1.1 lb) 500 g (1.1 lb) OPERATING TEMPERATURE 55 C to +80 C 55 C to +80 C DIMENSIONS 225 x 84 x 28 mm 240 x 92 x 28 mm H x W x D (8.85 x 3.30 x 1.10 in) (9.44 x 3.62 x 1.10 in) PIECES IN BOX Out Side view In Out Revision A 53

55 3-Way Power Splitter 3-Way Power Splitter, MHz MHz Made from silver-plated brass 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m ARTICLE AT3G-716F-AB00 AT3G-00NF-AB00 FREQUENCY RANGE MHz MHz INPUT POWER MHz 1000 W 300 W MHz 700 W 150 W MHz 500 W 100 W CONNECTORS DIN 7/16 female N female INPUTS/OUTPUTS 1/3 1/3 VSWR / RETURN LOSS 1.17 / -22 db 1.17 / -22 db INSERTION LOSS <0.05 db <0.05 db INTERMODULATION 2 x 20 W transmitter < -156 dbc < -156 dbc IMPEDANCE 50 ohm 50 ohm WEIGHT 500 g (1.1 lb) 500 g (1.1 lb) OPERATING TEMPERATURE 55 C to +80 C 55 C to +80 C DIMENSIONS 235 x 90 x 68 mm 245 x 111 x 78 mm H x W x D (9.3 x 3.6 x 2.7 in) (9.7 x 4.4 x 3.1 in) PIECES IN BOX Side view Out Out In Top view 3 OUTPUTS 33% Pout 33% Pout 33% Pout 56 Revision B

56 4-Way Power Splitter MHz Made from silver-plated brass 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m ARTICLE AT4G-716F-AB00 AT4G-00NF-AB00 FREQUENCY RANGE MHz MHz INPUT POWER MHz 1000 W 300 W MHz 700 W 150 W MHz 500 W 100 W CONNECTORS DIN 7/16 female N female INPUTS/OUTPUTS 1/4 1/4 VSWR / RETURN LOSS 1.17 / -22 db 1.17/ -22 db INSERTION LOSS <0.05 db <0.05 db INTERMODULATION 2 x 20 W transmitter < -156 dbc < -156 dbc IMPEDANCE 50 ohm 50 ohm WEIGHT 500 g (1.1 lb) 500 g (1.1 lb) OPERATING TEMPERATURE 55 C to +80 C 55 C to +80 C DIMENSIONS 235 x 90 x 90 mm 245 x 111 x 111 mm H x W x D (9.3 x 3.6 x 3.6 in) (9.7 x 4.4 x 4.4 in) PIECES IN BOX Side view Out Out In Top view 4 OUTPUTS 25% Pout 25% Pout 25% Pout 25% Pout Revision B 57

57 Power Splitters MHz Good VSWR Made of silver-plated brass EPDM O-rings eliminate water intrusion 10-year comprehensive warranty No need for tape or other external weatherproofing Includes clamp for secure mounting (CL40-1C078-A0) IP68-classified and water-pressure proof tested down to 25 m Side view ARTICLE AT2M-716F-AH00 AT3M-716F-AH00 AT4M-716F-AH00 FREQUENCY RANGE MHz MHz MHz INPUT POWER 500 W 500 W 500 W CONNECTORS DIN 7/16 female DIN 7/16 female DIN 7/16 female INPUTS/OUTPUTS 1/2 1/3 1/4 VSWR / RETURN LOSS 1.12 / -25 db 1.12 / -25 db 1.12 / -25 db INSERTION LOSS <0.05 db <0.05 db <0.05 db INTERMODULATION* 2 x 20 W transmitter < -156 dbc < -156 dbc < -156 dbc IMPEDANCE 50 ohm 50 ohm 50 ohm OPERATING TEMPERATURE -55 C to +80 C -55 C to +80 C -55 C to +80 C PIECES IN BOX Out In Out Top view 2 OUTPUTS 50% Pout 50% Pout 3 OUTPUTS 33% Pout 33% Pout 33% Pout 4 OUTPUTS 25% Pout 25% Pout 25% Pout 25% Pout * During intermodulation measurement attached cables are exposed to shock and vibration. 56 Revision A

58 Power Splitters MHz Good VSWR Made of silver-plated brass EPDM O-rings eliminate water intrusion 10-year comprehensive warranty No need for tape or other external weatherproofing IP68-classified and water-pressure proof tested down to 25 m ARTICLE AT2T-00NF-AA00 AT2T-716F-AA00 FREQUENCY RANGE MHz MHz INPUT POWER 100 W 500 W CONNECTORS N female 7/16 female INPUTS/OUTPUTS 1/2 1/2 VSWR / RETURN LOSS 1.12 / -25 db 1.12 / -25 db INSERTION LOSS 0.05 db 0.05 db INTERMODULATION* 2 x 20 W transmitter < -156 dbc < -156 dbc IMPEDANCE 50 ohm 50 ohm WEIGHT 800 g (1.75 lb) 800 g (1.75 lb) OPERATING TEMPERATURE -55 C to +80 C -55 C to +80 C DIMENSIONS 120 x 110 x 32 mm 100 x 100 x 32 mm H x W x D (4.73 x 4.33 x 1.26 in) (3.94 x 3.94 x 1.26 in) * During intermodulation measurement attached cables are exposed to shock and vibration. Revision A 57

59 Combiners Our combiners are small and easy to install. This minimises down-time during integration with existing antenna line systems, which in turn helps operators avoid loss of income. High quality O-rings provide built-in weather protection and eliminate the need for external weatherproofing. Our combiners are milled from solid brass and silver-plated to obtain better electrical performance. Exceptional isolation characteristics of 50 db or better effectively reduce disturbances from neighbouring systems. In addition, we have completely avoided soldering in order to eliminate the risk of cracking that can occur with soldered joints over time. Diplexer, and MHz Diplexer, 1800/2100 MHz Diplexer, and MHz Triplexer, , and MHz Triplexer, , and MHz Quadruplexer, , , and MHz In-band Combiner, MHz Rejection Filter, 800 MHz Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers

60 Diplexer and MHz Low insertion loss No soldered parts Made of silver-plated brass Mounting on wall or on poles in various dimensions No need for tape or other external weatherproofing DC and AISG Issue 2.0 Passthru on selected ports IP68-classified and water-pressure proof tested down to 25 m ELECTRICAL CHARACTERISTICS COMMON FOR ALL FREQUENCY RANGE MHz MHz INPUT POWER 400 W INTERMODULATION 2 x 20 W transmitter < -156 dbc IMPEDANCE 50 ohm VSWR / RETURN LOSS 1.22 / -20 db INSERTION LOSS < 0.2 db ISOLATION , MHz > 40 db , MHz > 50 db CONNECTORS DIN 7/16 female Diplexer, and MHz PRODUCT PROFILE Exir Telecom s diplexer has been developed to keep intermodulation products at the lowest possible level. The filter is milled from one solid piece and has no soldered parts. DC-PASS ON ALL PORTS DC-BLOCK ON MHz DIPLEXER COMM-0918-AB01 COBL-0918-AA00 WEIGHT 2100 g (4.6 lb) 2100 g (4.6 lb) DIMENSIONS 210 x 140 x 22 mm 210 x 140 x 22 mm H x W x D (8.27 x 5.51 x 0.87 in) (8.27 x 5.51 x 0.87 in) DIPLEXER W. BRACKET COMM-0918-AD00 COBL-0918-AD00 WEIGHT 2400 g (5.3 lb) 2400 g (5.3 lb) DIMENSIONS 210 x 140 x 32 mm 210 x 140 x 32 mm H x W x D (8.27 x 5.51 x 1.26 in) (8.27 x 5.51 x 1.26 in) DUAL DIPLEXER COMM-0918-AC00 COBL-0918-AC00 W. BRACKET WEIGHT 4500 g (9.9 lb) 4500 g (9.9 lb) DIMENSIONS 210 x 140 x 80 mm 210 x 140 x 80 mm H x W x D (8.27 x 5.51 x 3.15 in) (8.27 x 5.51 x 3.15 in) Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers Revision C 59

61 Diplexer 1800/2100 MHz IP68-classified Very compact High Reliability Rohs Compliant High Performance Low insertion loss DC and AISG Issue 2.0 Passthru on selected ports No need for tape or other external weatherproofing ELECTRICAL CHARACTERISTICS COMMON FOR ALL FREQUENCY RANGE MHz MHz AVERAGE POWER HANDLING 1800 port 200 W 2100 port 100 W INTERMODULATION 2 x 20 W transmitter < -155 dbc IMPEDANCE 50 ohm VSWR / RETURN LOSS >20 db INSERTION LOSS 0.3 db typical / Per Pass Band Edge: 0.5 db OPERATING TEMPERATURE -40 C to +65 C ENVIROMENTAL PROTECTION IP68 ISOLATION >50 db CONNECTORS DIN 7/16 female WEIGHT AND DIMENSIONS DIPLEXER SINGLE WITH BRACKET WEIGHT 2800 g (6.2 lb) DIMENSIONS 260 x 125 x 59.5 mm H x W x D (10.3 x 5.0 x 2.4 in) DIPLEXER DUAL WITH BRACKET WEIGHT DIMENSIONS H x W x D 5300 g (11.7 lb) 260 x 125 x 114 mm (10.3 x 5.0 x 4.5 in) Diplexer, 1800/2100 MHz COMM-1822-Axyz x y z Single = C No bracket = 0 DC All ports = 0 Dual = D Wall bracket = 1 DC block all ports = 1 Pole bracket = 2 DC MH = 2 DC MHz = 3 Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers 60 Revision D

62 Diplexer and MHz Rohs compliant Very compact Low insertion loss Long neck connectors DC and AISG Issue 2.0 Passthru on selected ports Mounting on wall or on poles in various dimensions No need for tape or other external weatherproofing ELECTRICAL CHARACTERISTICS COMMON FOR ALL PASS BAND MHz PASS BAND MHz IMPEDANCE 50 Ohm VSWR 1.19:1 / 21 db INSERTION LOSS 0.20 db max (0.15 db typical) ISOLATION > 50 db PIM3 (2 x 20 W carrier) < -156 dbc INPUT POWER 400 W ENVIRONMENTAL OPERATING TEMPERATURE -55 C to +80 C WATERPROOF IP67 MECHANICAL WEIGHT 1500 g (3.31 lb) DIMENSIONS x 96 x 48 mm H x W x D (5.61 x 3.78 x 1.89 in) CONNECTORS DIN 7/16 female COLOR Powder coating, Color NCS 1502-R MOUNTING Mounting brackets for poles and walls GROUNDING Tapped hole or bolt M6 COMD-1727-Cxyz x y z Single = 1 No bracket = 0 DC block all ports = 1 Dual = 2 Bracket = 1 DC MHz port = 2 DC MHz port = 3 DC all ports = 4 Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers Revision A 65

63 IP68-classified Very compact Rohs Compliant Low insertion loss DC and AISG Issue 2.0 Passthru on selected ports No need for tape or other external weatherproofing ELECTRICAL CHARACTERISTICS COMMON FOR ALL FREQUENCY RANGE MHz MHz MHz AVERAGE POWER HANDLING 1900 port 200 W 1800 port 200 W 2100 port 150 W INTERMODULATION 2 x 20 W transmitter < -155 dbc IMPEDANCE 50 ohm VSWR / RETURN LOSS 1.22 / -20 db INSERTION LOSS < 0.3 db (typical) (0.5 db at bandedge) ISOLATION > 50 db CONNECTORS DIN 7/16 female DIMENSIONS AND WEIGHT TRIPLEXER SINGLE WITH BRACKET WEIGHT 3300 g (7.3 lb) DIMENSIONS 200 x 165 x 59 mm H x W x D (7.9 x 6.5 x 2.3 in) TRIPLEXER DUAL WITH BRACKET WEIGHT DIMENSIONS H x W x D Triplexer, , and MHz Triplexer , and MHz 6500 g (14.3 lb) 200 x 165 x 114 mm (7.9 x 6.5 x 4.5 in) COMM-0922-Axyz x y z Single = A No bracket = 0 DC All ports = 0 Dual = B Wall bracket = 1 DC block all ports = 1 Pole bracket = 2 DC MHz = 2 DC MHz = 3 DC MHz = 4 DC block MHz = 5 DC block MHz = 6 DC block MHz = 7 Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers Revision F 63

64 Triplexer , and MHz IP68-classified Very compact Rohs Compliant Low insertion loss DC and AISG Issue 2.0 Passthru on selected ports No need for tape or other external weatherproofing ELECTRICAL CHARACTERISTICS COMMON FOR ALL FREQUENCY RANGE MHz MHz MHz AVERAGE POWER HANDLING MHz 80 W MHz 80 W MHz 80 W INTERMODULATION 2 x 20 W transmitter < -155 dbc IMPEDANCE 50 ohm VSWR / RETURN LOSS 1.29 / -18 db INSERTION LOSS MHz < 0.3 db MHz < 0.3 db MHz < 0.3 db ISOLATION BETWEEN BANDS > 50 db CONNECTORS DIN 7/16 female DIMENSIONS AND WEIGHT TRIPLEXER SINGLE WEIGHT DIMENSIONS H x W x D 3000 g (6.61 lb) 200 x 155 x 47.5 mm (7.87 x 6.10 x 1.87 in) TRIPLEXER SINGLE WITH BRACKET WEIGHT 3300 g (7.28 lb) DIMENSIONS 300 x 155 x 59.5 mm H x W x D (11.81 x 6.10 x 2.34 in) TRIPLEXER DUAL WITH BRACKET WEIGHT DIMENSIONS H x W x D 6600 g (14.55 lb) 300 x 155 x 115 mm (11.81 x 6.10 x 4.53 in) Triplexer, , and MHz COMT-1727-Bxyz x y z Single = A No bracket = 0 DC All ports = 0 Dual = B Bracket = 1 DC block all ports = 1 DC MHz = 2 DC MHz = 3 DC MHz = 4 DC block MHz = 5 DC block MHz = 6 DC block z MHz = 7 Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers Revision C 65

65 Quadruplexer , , and MHz IP67-classified Low insertion loss DC and AISG Issue 2.0 Passthru on selected ports Mounting on wall or on poles in various dimensions No need for tape or other external weatherproofing PRODUCT PROFILE Exir Telecom s quadruplexer has been developed to keep intermodulation products at the lowest possible level. ELECTRICAL CHARACTERISTICS COMMON FOR ALL FREQUENCY RANGE MHz MHz MHz MHz AVERAGE POWER HANDLING MHz 120 W MHz 120 W MHz 80 W MHz 80 W INTERMODULATION 2 x 20 W transmitter < -156 dbc IMPEDANCE 50 ohm VSWR / RETURN LOSS 1.29 / -18 db INSERTION LOSS MHz < 0.2 db MHz < 0.3 db MHz < 0.5 db MHz < 0.5 db ISOLATION BETWEEN BANDS > 50 db CONNECTORS DIN 7/16 female DIMENSIONS AND WEIGHT QUADRUPLEXER SINGLE WEIGHT DIMENSIONS H x W x D 3800 g (8.38 lb) 222 x 250 x 55 mm (8.74 x 9.84 x 2.17 in) QUADRUPLEXER SINGLE WITH BRACKET WEIGHT 4200 g (9.26 lb) DIMENSIONS 222 x 250 x 71.5 mm H x W x D (8.74 x 9.84 x 2.81 in) QUADRUPLEXER DUAL WITH BRACKET WEIGHT 8000 g (17.64 lb) DIMENSIONS 222 x 250 x mm H x W x D (8.74 x 9.84 x 5.14 in) COMQ-0727-Axyz x y z Single = A No bracket = 0 DC All ports = 0 Dual = B Bracket = 1 DC block all ports = 1 DC MHz = 2 DC MHz = 3 DC MHz = 4 DC MHz = 5 DC block MHz = 6 DC block MHz = 7 DC block MHz = 8 DC block MHz = 9 Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers 57 Revision A

66 DC Pass AISG Compliant Optional rack and mast mount No need for tape or other external weatherproofing ARTICLE COMM-0909-AA00 UPLINK (RX) PATH DOWNLINK (TX) PATH FREQUENCY MHz MHz INSERTION LOSS 4.5 db 0.6 db RETURN LOSS > 18 db > 18 db AVERAGE POWER HANDLING N.A. 200 W (+53 dbm) PEAK POWER N.A. 281 W (+62 dbm) COMMON FOR ALL SUPPLY VOLTAGE HANDLING CONTINUOUS CURRENT HANDLING DC-RESISTANCE INTERMODULATION 2x20 W transmitter RF CONNECTORS DIMENSIONS H x W x D WEIGHT INGRESS PROTECTION In-band Combiner, MHz In-band combiner MHz V 2 A < 0.1 Ω -115 dbm (-158 dbc) maximum in Rx band 7/16 female 420 x 140 x 80 mm (16.53 x 5.51 x 3.14 in) < 8000 g IP67 Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers Revision A 67

67 Rejection Filter, 800 MHz Co-location mobile network with digital broadcasting system Low insertion losss No need for tape or other external weatherproofing ARTICLE EXT-P11062-X X ELECTRICAL Single = 1 FREQUENCY RANGE MHz and MHz Dual = 2 BAND WIDTH 10 MHz / 10 MHz 1.2 db typical, 1.8 db MHz INSERTION LOSS MHz MHz max. RETURN LOSS 18 db min. REJECTION > 15 db typical, 12 db <790 MHz POWER HANDLING 200 W, average PEAK POWER 1000 W IMPEDANCE 50 Ohm nominal DC AND AISG No pass ENVIRONMENTAL OPERATING TEMPERATURE RANGE -33 C to +60 C STORAGE TEMPERATURE RANGE -45 C to +85 C RELATIVE HUMIDITY 5% - 95% APPLICATIONS Outdoor WATERPROOF IP67 MECHANICAL WEIGHT 4500 g (single) DIMENSIONS H x W x D 300 x 190 x 127 mm, excluding brackets and connectors CONNECTOR DIN 7/16 female, long neck (38 mm) and with EPDM rubber MATERIAL Aluminium COLOR Powder coating, color NCS 1502-R PROTECTION GROUND M8 screw BRACKETS AND CLAMPS SS304 or SS316 / passive Introduction Connectors Jumper Cables EMP & Grounding Cable Clamps Power Splitters Combiners TMA Absorbers 59 Revision B

68 TMA Exir Telecom offers a wide range of TMA solutions which includes TMAs for GSM, DCS, UMTS and LTE including Twin or/and Dual Band TMAs. Their function is to amplify the uplink signals and trough filters separate the Rx and Tx signals. To inject the DC supply voltage into the feeder, a Bias-tee can be offered. The TMAs from Exir Telecom provide security in the event of a possible malfunction. Should anything prevent the TMA from working correctly, a bypass function automatically diverts the signals and activates an alarm notification over the PDU (Power Distribution Unit), indicating the malfunction via LEDs. Upon request, we offer customized or standard TMA solutions, always with very high quality, short delivery time and attractive prices. Please contact us for a quotation.

69 Absorbers Absorbers, 100 W Absorbers, 50 W Absorbers, 25 W Absorbers, 5 W

70 Absorbers 100 W Rohs compliant COMMON FOR BOTH FREQUENCY RANGE MHz INPUT POWER (at 25 C) 100 W IMPEDANCE 50 ohm RETURN LOSS MHz 35 db MHz 32 db MHz 18 db OPERATING TEMPERATURE -55 C to +80 C DIMENSIONS 125 x 135 x 125 mm H x W x D (4.93 x 5.32 x 4.93 in) WEIGHT 2400 g (5.28 lb) Absorbers, 100 W ARTICLE LDB A0 LDB B0 LDB C0 LDB D0 CONNECTOR DIN 7/16 female DIN 7/16 male N female N male Revision B 79

71 Absorbers 50 W Rohs compliant Available with BNC COMMON FOR BOTH FREQUENCY RANGE DC 4000 MHz INPUT POWER (at 25 C) 50 W PEAK POWER 5 kw IMPEDANCE 50 ohm ± 2% RETURN LOSS MHz 26 db MHz 20.8 db OPERATING TEMPERATURE -55 to +125 C DIMENSIONS 72 x 50 x 94 mm H x W x D (2.83 x 1.97 x 3.7 in) WEIGHT 540 g (1.19 lb) Absorbers, 50 W ARTICLE LDB A0 LDB B0 CONNECTOR DIN 7/16 female DIN 7/16 male 80 Revision B

72 Absorbers 25 W Rohs compliant COMMON FOR BOTH FREQUENCY RANGE MHz INPUT POWER (at 25 C) 25 W IMPEDANCE 50 ohm RETURN LOSS MHz 35 db MHz 32 db MHz 18 db OPERATING TEMPERATURE -55 C to +80 C DIMENSIONS 65 x 58 x 122 mm H x W x D (2.56 x 2.28 x 4.80 in) WEIGHT 820 g (1.8 lb) Absorbers, 25 W ARTICLE LDB AE00 LDB AF00 LDB AG00 LDB AH00 CONNECTOR DIN 7/16 female DIN 7/16 male N female N male Revision B 81

73 Absorbers 5 W Rohs compliant Absorbers, 5 W IP68-classified and water-pressure proof tested down to 25 m COMMON FOR BOTH FREQUENCY RANGE MHz INPUT POWER (at 25 C) 5 W IMPEDANCE 50 ohm RETURN LOSS MHz 35 db MHz 32 db MHz 18 db OPERATING TEMPERATURE -55 C to +80 C DIMENSIONS Length mm ( in) Ø 32 mm (1.25 in) WEIGHT 180 g (0.39 lb) g (0.40 lb) ARTICLE LDB A0 LDB B0 LDB C0 LDB D0 CONNECTOR DIN 7/16 female DIN 7/16 male N female N male 82 Revision A

74

75 Reliability and High-Performance HEAD OFFICE: Exir Broadcasting & Telecom AB Sallerup 2120, SE Hörby, Sweden PHONE: FAX: SALES OFFICE: Exir Telecom, Isafjordsgatan 22B, SE Kista, Sweden PHONE: FAX: info@exirtelecom.com WEB: