D100L Series. 100 Hz to 100 khz Low Noise Fixed Frequency. 4- and 8- Pole Low-Pass Filters
|
|
|
- Jade Griffith
- 6 years ago
- Views:
Transcription
1 DL Series Hz to khz Low Noise Fixed Frequency 4- and 8- Pole Low-Pass Filters Description: DL Series filters are low noise and distortion 4- and 8-pole, Butterworth or Bessel fixed frequency low-pass filters. These filters feature near theoretical low noise and distortion performance, by providing up to -2 db noise floors (2-Bit). DL s take advantage of FDI s design expertise utilizing high performance amplifiers and surface-mount technology to provide design engineers with precision signal conditioning solutions in a compact package. These fully self-contained units require no external components or adjustments. Each DL comes factory tuned to a user specified corner frequency between Hz to khz and operate with low harmonic distortion over an input voltage range to ± V. Features/Benefits: Small 32-pin DIP (.8"L x "W) footprint minimizes board space requirements. Plug-in ready-to-use, reducing engineering design and manufacturing cycle time. Factory tuned, no external clocks or adjustments needed Broad range of corner frequencies to meet a wide range of applications. Available Low-Pass Models: Page DL4L 4-Pole Bessel 2 DL4B 4-Pole Butterworth 2 DL8L 8-Pole Bessel 2 DL8B 8-Pole Butterworth 2 General Specifications Pin-out/package data & order information 3 Applications Transducer output filtering: Production test instrumentation Medical electronics equipment and research Noise and harmonic analysis Frequency spectrum analysis sales@freqdev.com Web Address:
2 DL Series Hz to khz Low Noise Fixed Frequency 4- and 8- Pole Low-Pass Filters DL4B DL4L DL8B DL8L Product Specifications Transfer Function 4-Pole Butterworth 4-Pole Bessel 8-Pole Butterworth 8-Pole Bessel Size.8 x x.3.8 x x.3.8 x x.3.8 x x.3 Range f c Hz to khz Hz to khz Hz to khz Hz to khz Theoretical Transfer Characteristics Passband Ripple (theoretical) Page 7 Page 2 Page 9 db db db db Page 4 DC Voltage Gain (non-inverting) Stopband Attenuation Rate 24 db/octave 24 db/octave 48 db/octave 48 db/octave Cutoff Frequency f c ± % max. f c ± % max. f c ± % max. f c ± % max. Stability ± %/ C ± %/ C ± %/ C ± %/ C Amplitude -3 db -3 db -3 db -3 db Phase Filter Attenuation (theoretical) 7 db f c.86 db f c db f c.9 db f c 3. db f c 3. db f c 3. db f c 3. db f c 3 db 2.37 f c 3 db 3.5 f c 6 db 2.37 f c 6 db 4.52 f c 4 db 3.6 f c 4 db 4.72 f c 8 db 3.6 f c 8 db 6.7 f c Phase Match f c ± 2. max f c ± 2. max f c ± 2. max f c ± 2. max ± typ ± typ ± typ ± typ Amplitude Accuracy f c ± db max f c ± db max f c ± db max f c ± db max (theoretical) ±. db typ ±. db typ ±. db typ ±. db typ (THD) Total Harmonic Vp-p F C khz F C 2 khz F C khz <- db max. <- db max. <-5 db max. <-5 db max. Narrow Band Noise khz 2V p-p (µv rms) (µv rms) (µv rms) (µv rms) F C khz F C 2 khz 7. typ., 2 max. 7. typ., 2 max. 7. typ., 2 max. 7. typ., 2 max. 2 typ., 22 max. 2 typ., 22 max. 2 typ., 22 max. 2 typ., 22 max. F C khz 22 typ., 4 max. 22 typ., 4 max. 4 typ., 7 max. 4 typ., 7 max. Filter Mounting 2 FMA-S FMA-S FMA-S FMA-S Assembly. Unit to unit match for the same transfer function, set to the same frequency and operating configuration, and from the same manufacturing lot. 2. Use I/O jumpers to bypass input and output buffers, for low noise operation. With FMA, D distortion specs at 5k to khz may degrade slightly. 2 sales@freqdev.com Web Address:
3 DL Series Specifications (25ºC and Vs ± 5 Vdc) Pin-Out and Package Data Ordering Information Analog Input Characteristics Impedance kω min. Voltage Range ± V peak Max. Safe Voltage ± Vs Analog Output Characteristics Load impedance k Ω min. Linear Operating Range for THD ± 5V Operating Range for low Noise ± V Current ±5V) ma max. Offset Voltage 3 2 mv typ. 2 mv max. Offset Temp. Coefficient 5 µv/ºc. Power Supply (±V S ) Rated Voltage ±5V Operating Range ±5V min. ±8V max. Quiescent Current DL4 4 ma max. DL8 8 ma max. Temperature Range Operating ºC to +7ºC Storage -25ºC to +85ºC ".7" " " " 25" (dia) "(typ).5" "(max) > khz.8"(max) > khz Bottom View 5".55".3"(max).5" (min) OUT +VS -VS OS GND < khz < khz All dimensions are in inches All case dimensions ± " IN.55".65".5"(max) 7.8" DC Offset Adjustment +Vs ORDERING INFORMATION 2 k (Cermet) Do not connect if trim is not required. 4 Os Filter type L = Low Pass Transfer Function B= Butterworth L = Bessel DL4B- khz -Vs Notes:. Input and output signal voltage referenced to supply common. 2. Output is short circuit protected to common. DO NOT CONNECT TO ±Vs. 3. Adjustable to zero. 4. Units operate with or without offset pin connected. 5. How to specify Corner Frequency. Corner frequency is specified by attaching a three-digit frequency designator to the basic model number. Corner frequencies can range from Hz to khz. # Poles - 3 db Corner Frequency 5 4 or 8 e.g., 849 Hz 2.5 khz 33.3 khz We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements, recommendations or suggestions herein in conjunction with our conditions of sale, which apply, to all goods supplied by us. We assume no responsibility for the use of these statements, recommendations or suggestions, nor do we intend them as a recommendation for any use, which would infringe any patent or copyright. PR-DL 3 sales@freqdev.com Web Address:
4 Low-Pass 4-Pole Bessel Normalized Group Delay: of Hz.The actual delay is the normalized delay divided (V/V)
5 8-Pole Bessel Low-Pass Normalized Group Delay: of Hz.The actual delay is the normalized delay divided (V/V)
6 Low-Pass 4-Pole Butterworth Normalized Group Delay: of Hz.The actual delay is the normalized delay divided (V/V)
7 Low-Pass 8-Pole Butterworth Normalized Group Delay: of Hz.The actual delay is the normalized delay divided (V/V)
D61 Series. 32-Pin DIP 4 - Pole Filters Hz to 1.00 Hz Fixed Frequency
D61 Series 0.02 Hz to 0 Hz Fixed Frequency 32-Pin DIP 4 - Pole Filters Description The D61 Series of small 4-pole fixed-frequency, precision active filters provide high performance linear active filtering
D66 & DP66 Series. 32 Pin DIP 6-Pole Filters. 1.0 Hz to 100 khz Fixed Frequency
D66 & DP66 Series Hz to 00 khz Fixed Frequency 32 Pin DIP Filters Description The D66 and DP66 Series of small 6-pole fixedfrequency, precision active filters provide high performance linear active filtering
D94 Series. 1 Hz to 400 khz* Low Noise Fixed Frequency. 4 - Pole Single Power Supply Anti-Aliasing Low-Pass Filters
Hz to 400 khz* Low Noise Fixed Frequency Description: The D94 Series of small 4-pole fixed-frequency, precision active filters provide high performance linear active filtering in a compact package, with
D98 Series. 1 Hz to 400 khz* Low Noise Fixed Frequency. 8- Pole Single Power Supply Anti-Aliasing Low-Pass Filters
Hz to 400 khz* Low Noise Fixed Frequency Description: The D98 Series of small 8-pole fixed-frequency, precision active filters provide high performance linear active filtering in a compact package, with
D92 Series. 1 Hz to 400 khz* Low Noise Fixed Frequency. 2 - Pole Single Power Supply Anti-Aliasing Low-Pass Filters
Hz to 400 khz* Low Noise Fixed Frequency Description: The D92 Series of small 2-pole fixed-frequency, precision active filters provide high performance linear active filtering in a compact package, with
824BP Series. 8 Bit Programmable 2-Pole Pair Filters. Band Pass
824BP Series Band Pass 8 Bit Programmable 2-Pole Pair Filters Description: The 824BP Series is a 2-pole-pair digitally programmable precision band-pass active filter that provides high performance in a
FDI Hz to 20 khz Resistor Programmable. 14 Pin DIP Quadrature Oscillator. Description
Description The Model FDI443 Precision has two outputs that are 90 out of phase with each other. The output frequency of the FDI443 is programmable using two resistors or two resistors and two capacitors.
Models 900CT & 900BT. Tunable Active Single Channel Certified Filter Instrument
Tunable Active Single Channel Certified Filter Instrument Description Frequency Devices instruments are single channel; 8-pole low-pass or high-pass, front panel tunable filter instruments. The controls
Model 950. Tunable Filter Instruments
Single Channel- Certified Description Frequency Devices instruments furnish the user with an 8-pole low-pass or high-pass filter that is tunable by front panel controls. The controls allow the user to
High Common-Mode Rejection. Differential Line Receiver SSM2141 REV. B FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 100 db typ 60 Hz: 100 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.001% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
DISCONTINUED PRODUCT FOR REFERENCE ONLY LOW-VOLTAGE AUDIO POWER AMPLIFIER LOW-VOLTAGE AUDIO POWER AMPLIFIER FEATURES. Data Sheet
3718 LOW-VOLTAGE AUDIO POWER AMPLIFIER Data Sheet 27117.25 Providing a low-cost, compact alternative to discrete transistor amplifiers, the ULN3718M integrated circuit is ideal for application as a headphone
1 W BTL mono audio amplifier TDA7052
GENERAL DESCRIPTION The TDA7052 is a mono output amplifier in a 8-lead dual-in-line (DIL) plastic package. The device is designed for battery-fed portable audio applications. Features: No external components
TDA7240AV 20W BRIDGE AMPLIFIER FOR CAR RADIO
TDA7240A COMPACT HEPTAWATT PACKAGE FEW EXTERNAL COMPONENTS OUTPUT PROTECTED AGAINST SHORT CIRCUITS TO GROUND AND ACROSS LOAD DUMP TRANSIENT THERMAL SHUTDOWN. LOUDSPEAKER PROTECTION HIGH CURRENT CAPABILITY
OBSOLETE. Low Cost Quad Voltage Controlled Amplifier SSM2164 REV. 0
a FEATURES Four High Performance VCAs in a Single Package.2% THD No External Trimming 12 db Gain Range.7 db Gain Matching (Unity Gain) Class A or AB Operation APPLICATIONS Remote, Automatic, or Computer
TDA7263M W STEREO AMPLIFIER WITH MUTING
12 +12W STEREO AMPLIFIER WITH MUTING WIDE SUPPLY VOLTAGE RANGE HIGH OUTPUT POWER 12+12W @ V S =28V, R L =8Ω, THD=10% MUTE FACILITY (POP FREE) WITH LOW CONSUMPTION AC SHORT CIRCUIT PROTECTION THERMAL OVERLOAD
Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197
General Description The is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail single-supply operation, outstanding precision specifications, and a high gain bandwidth. This
High Accuracy 8-Pin Instrumentation Amplifier AMP02
a FEATURES Low Offset Voltage: 100 V max Low Drift: 2 V/ C max Wide Gain Range 1 to 10,000 High Common-Mode Rejection: 115 db min High Bandwidth (G = 1000): 200 khz typ Gain Equation Accuracy: 0.5% max
Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820
a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from + V to + V Dual Supply Capability from. V to 8 V Excellent Load
TDA W Hi-Fi AUDIO AMPLIFIER
TDA2030 14W Hi-Fi AUDIO AMPLIFIER DESCRIPTION The TDA2030 is a monolithic integrated circuit in Pentawatt package, intended for use as a low frequency class AB amplifier. Typically it provides 14W output
Low Cost, General Purpose High Speed JFET Amplifier AD825
a FEATURES High Speed 41 MHz, 3 db Bandwidth 125 V/ s Slew Rate 8 ns Settling Time Input Bias Current of 2 pa and Noise Current of 1 fa/ Hz Input Voltage Noise of 12 nv/ Hz Fully Specified Power Supplies:
OBSOLETE. Self-Contained Audio Preamplifier SSM2017 REV. B
a FEATURES Excellent Noise Performance: 950 pv/ Hz or 1.5 db Noise Figure Ultralow THD: < 0.01% @ G = 100 Over the Full Audio Band Wide Bandwidth: 1 MHz @ G = 100 High Slew Rate: 17 V/ s typ Unity Gain
Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820
a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from V to V Dual Supply Capability from. V to 8 V Excellent Load Drive
DESCRIPTIO. LTC Low Power, 8th Order Progressive Elliptic, Lowpass Filter
LTC9- Low Power, th Order Progressive Elliptic, Lowpass Filter FEATRES th Order Elliptic Filter in SO- Package Operates from Single.V to ±V Power Supplies db at.f CTOFF db at.f CTOFF db at f CTOFF Wide
Precision, High-Bandwidth Op Amp
EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage
Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
www.burr-brown.com/databook/.html Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 25V/µs WIDE GAIN-BANDWIDTH: MHz UNITY-GAIN STABLE
TDA W Hi-Fi AUDIO POWER AMPLIFIER
32W Hi-Fi AUDIO POWER AMPLIFIER HIGH OUTPUT POWER (50W MUSIC POWER IEC 268.3 RULES) HIGH OPERATING SUPPLY VOLTAGE (50V) SINGLE OR SPLIT SUPPLY OPERATIONS VERY LOW DISTORTION SHORT CIRCUIT PROTECTION (OUT
Isolated High Level Voltage Output 7B22 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated High Level Voltage Output 7B22 FEATURES Unity gain single-channel signal conditioning output module. Interfaces and filters a +10 V input signal and provides an isolated precision output of +10V.
Zero Drift, Unidirectional Current Shunt Monitor AD8219
Zero Drift, Unidirectional Current Shunt Monitor FEATURES High common-mode voltage range 4 V to 8 V operating.3 V to +85 V survival Buffered output voltage Gain = 6 V/V Wide operating temperature range:
Self-Contained Audio Preamplifier SSM2019
a FEATURES Excellent Noise Performance:. nv/ Hz or.5 db Noise Figure Ultra-low THD:
High Speed FET-Input INSTRUMENTATION AMPLIFIER
High Speed FET-Input INSTRUMENTATION AMPLIFIER FEATURES FET INPUT: I B = 2pA max HIGH SPEED: T S = 4µs (G =,.%) LOW OFFSET VOLTAGE: µv max LOW OFFSET VOLTAGE DRIFT: µv/ C max HIGH COMMON-MODE REJECTION:
Quad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V Max Offset Voltage V/ C Max Offset Voltage Drift 5 pa Max Input Bias Current.2 pa/ C Typical I B Drift Low Noise.5 V p-p Typical Noise,. Hz to Hz Low Power 6 A Max Supply
TDA W STEREO AMPLIFIER WITH MUTING
12 +12W STEREO AMPLIFIER WITH MUTING WIDE SUPPLY VOLTAGE RANGE HIGH OUTPUT POWER 12+12W @ V S =28V, R L =8Ω, THD=10% MUTE FACILITY (POP FREE) WITH LOW CONSUMPTION AC SHORT CIRCUIT PROTECTION THERMAL OVERLOAD
High Speed BUFFER AMPLIFIER
High Speed BUFFER AMPLIFIER FEATURES WIDE BANDWIDTH: MHz HIGH SLEW RATE: V/µs HIGH OUTPUT CURRENT: 1mA LOW OFFSET VOLTAGE: 1.mV REPLACES HA-33 IMPROVED PERFORMANCE/PRICE: LH33, LTC11, HS APPLICATIONS OP
TDA1905 5W AUDIO AMPLIFIER WITH MUTING
5W AUDIO AMPLIFIER WITH MUTING DESCRIPTION The TDA1905 is a monolithic integrated circuit in POWERDIP package, intended for use as low frequency power amplifier in a wide range of applications in radio
Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
www.burr-brown.com/databook/.html Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 25V/µs WIDE GAIN-BANDWIDTH: MHz UNITY-GAIN STABLE
Obsolete Product(s) - Obsolete Product(s)
2 W mono amplifier Features 2 W output power into 8 Ω at 12 V, THD = 10% Internally fixed gain of 32 db No feedback capacitor No boucherot cell Thermal protection AC short-circuit protection SVR capacitor
Isolated, Linearized Thermocouple Input 7B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized Thermocouple Input 7B47 FEATURES Interfaces, amplifies and filters input voltages from a J, K, T, E, R, S, B or N-type thermocouple. Module provides a precision output of either +1
Isolated, Thermocouple Input 7B37 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Thermocouple Input 7B37 FEATURES Interfaces, amplifies, and filters input voltages from a J, K, T, E, R, S, or B-type thermocouple. Module provides a precision output of either +1 V to +5 V or
Quad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V max Offset Voltage V/ C max Offset Voltage Drift 5 pa max Input Bias Current.2 pa/ C typical I B Drift Low Noise.5 V p-p typical Noise,. Hz to Hz Low Power 6 A max Supply
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
6 db Differential Line Receiver
a FEATURES High Common-Mode Rejection DC: 9 db typ Hz: 9 db typ khz: 8 db typ Ultralow THD:.% typ @ khz Fast Slew Rate: V/ s typ Wide Bandwidth: 7 MHz typ (G = /) Two Gain Levels Available: G = / or Low
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 20W BRIDGE AMPLIFIER FOR CAR RADIO DESCRIPTION The UTC A720 is a 20W bridge audio amplifier IC and designed for car radio applications. A comprehensive array of on-chip protection,
Quad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V Max Offset Voltage V/ C Max Offset Voltage Drift 5 pa Max Input Bias Current.2 pa/ C Typical I B Drift Low Noise.5 V p-p Typical Noise,. Hz to Hz Low Power 6 A Max Supply
PART. MAX7401CSA 0 C to +70 C 8 SO MAX7405EPA MAX7401ESA MAX7405CSA MAX7405CPA MAX7405ESA V SUPPLY CLOCK
19-4788; Rev 1; 6/99 8th-Order, Lowpass, Bessel, General Description The / 8th-order, lowpass, Bessel, switched-capacitor filters (SCFs) operate from a single +5 () or +3 () supply. These devices draw
Isolated, Linearized RTD Input 7B34 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Linearized RTD Input 7B34 FEATURES Amplifies, Protects, Filters, and interfaces input voltages from a wide variety of two and three-wire platinum, copper and nickel Resistor Temperature Detectors
Obsolete Product(s) - Obsolete Product(s)
TDA7263 12 +12W STEREO AMPLIFIER WITH MUTING WIDE SUPPLY VOLTAGE RANGE HIGH OUTPUT POWER 12+12W @ VS=28V, RL = 8Ω, THD=10% MUTE FACILITY (POP FREE) WITH LOW CONSUMPTION AC SHORT CIRCUIT PROTECTION THERMAL
Precision Gain=10 DIFFERENTIAL AMPLIFIER
INA Precision Gain= DIFFERENTIAL AMPLIFIER FEATURES ACCURATE GAIN: ±.% max HIGH COMMON-MODE REJECTION: 8dB min NONLINEARITY:.% max EASY TO USE PLASTIC 8-PIN DIP, SO-8 SOIC PACKAGES APPLICATIONS G = DIFFERENTIAL
LME49710 High Performance, High Fidelity Audio Operational Amplifier
High Performance, High Fidelity Audio Operational Amplifier General Description The LME49710 is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized and fully
Dual Precision, Low Cost, High Speed BiFET Op Amp AD712-EP
Dual Precision, Low Cost, High Speed BiFET Op Amp FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +125 C) Controlled manufacturing baseline One
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 10+10W DUAL BRIDGE AMPLIFIER DESCRIPTION The UTC TDA797 is a dual bridge amplifier, it uses UTC advanced technology to provide customers with wide supply voltage, stand-by
. LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION
DUAL LOW-VOLTAGE POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 1.8V. LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION MINIDIP ORDERING NUMBER : DESCRIPTION The is a monolithic integrated
Dual, High Voltage Current Shunt Monitor AD8213
Dual, High Voltage Current Shunt Monitor AD823 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +6 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range
UNISONIC TECHNOLOGIES CO., LTD KA8602
UNISONIC TECHNOLOGIES CO., LTD KA02 LOW VOLTAGE AUDIO POWER AMPLIFIER DESCRIPTION The UTC KA02 is the audio power amplifier available for low voltage. The UTC KA02 supplies differential outputs for maximizing
TL072 TL072A - TL072B
A - B LOW NOISE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORT-CIRCUIT PROTECTION
Dual Picoampere Input Current Bipolar Op Amp AD706
a FEATURE HIGH DC PRECISION V max Offset Voltage.6 V/ C max Offset Drift pa max Input Bias Current LOW NOISE. V p-p Voltage Noise,. Hz to Hz LOW POWER A Supply Current Available in -Lead Plastic Mini-DlP,
CLC1011, CLC2011, CLC4011 Low Power, Low Cost, Rail-to-Rail I/O Amplifiers
Comlinear CLC1011, CLC2011, CLC4011 Low Power, Low Cost, Rail-to-Rail I/O Amplifiers Amplify the Human Experience F E A T U R E S n 136μA supply current n 4.9MHz bandwidth n Output swings to within 20mV
TDA W hi-fi audio amplifier. Features. Description
TDA2030 14 W hi-fi audio amplifier Features Wide-range supply voltage, up to 36 V Single or split power supply Short-circuit protection to ground Thermal shutdown Description The TDA2030 is a monolithic
Dual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
Precision, Low Power INSTRUMENTATION AMPLIFIER
Precision, Low Power INSTRUMENTATION AMPLIFIER FEATURES LOW OFFSET VOLTAGE: µv max LOW DRIFT:.µV/ C max LOW INPUT BIAS CURRENT: na max HIGH CMR: db min INPUTS PROTECTED TO ±V WIDE SUPPLY RANGE: ±. to ±V
Single-Supply, Rail-to-Rail, Low Power FET-Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power FET-Input Op Amp AD82 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V
IXYS IXI848A. High-Side Current Monitor. General Description. Features: Applications: Ordering Information. General Application Circuit
High-Side Current Monitor Features: High-Side Current Sense Amplifier 2.7V to 60V Input Range 0.7 Typical Full Scale Accuracy Scalable Output Voltage SOIC Package Applications: Power Management Systems
TDA7241B 20W BRIDGE AMPLIFIER FOR CAR RADIO
TDA7241B 20W BRIDGE AMPLIFIER FOR CAR RADIO VERY LOW STAND-BY CURRENT GAIN = 32dB OUTPUT PROTECTED AGAINST SHORT CIRCUITS TO GROUND AND ACROSS LOAD COMPACT HEPTAWATT PACKAGE DUMP TRANSIENT THERMAL SHUTDOWN
TEB1033 TEF1033-TEC1033
TEB1033 TEF1033-TEC1033 PRECISION DUAL OPERATIONAL AMPLIFIERS VERY LOW INPUT OFFSET VOLTAGE : 1mV max. LOW DISTORTION RATIO LOW NOISE VERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE
High-Side Measurement CURRENT SHUNT MONITOR
INA39 INA69 www.ti.com High-Side Measurement CURRENT SHUNT MONITOR FEATURES COMPLETE UNIPOLAR HIGH-SIDE CURRENT MEASUREMENT CIRCUIT WIDE SUPPLY AND COMMON-MODE RANGE INA39:.7V to 40V INA69:.7V to 60V INDEPENDENT
LM4562 Dual High Performance, High Fidelity Audio Operational Amplifier
Dual High Performance, High Fidelity Audio Operational Amplifier General Description The is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized and fully
MIC7300 A17. General Description. Features. Applications. Ordering Information. Pin Configurations. Functional Configuration.
MIC7300 High-Output Drive Rail-to-Rail Op Amp General Description The MIC7300 is a high-performance CMOS operational amplifier featuring rail-to-rail input and output with strong output drive capability.
Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER
Dual FET-Input, Low Distortion OPERATIONAL AMPLIFIER FEATURES LOW DISTORTION:.3% at khz LOW NOISE: nv/ Hz HIGH SLEW RATE: 2V/µs WIDE GAIN-BANDWIDTH: 2MHz UNITY-GAIN STABLE WIDE SUPPLY RANGE: V S = ±4.
UNISONIC TECHNOLOGIES CO.,LTD.
UNISONIC TECHNOLOGIES CO.,LTD. STEREO AUDIO AMPLIFIER DESCRIPTION The UTC is a monolithic integrated audio amplifier in a 6-pin plastic dual in line package. It is designed for portable cassette players
UNISONIC TECHNOLOGIES CO., LTD TDA2050
UNISONIC TECHNOLOGIES CO., LTD TDA2050 32W HI-FI AUDIO POWER AMPLIFIER DESCRIPTION The UTC TDA2050 is a monolithic integrated circuit with high power capability and is designed to use as an class AB audio
Obsolete Product(s) - Obsolete Product(s)
0 0 STEREO AMPLIFIER ITH MUTE & STBY IDE SUPPLY VOLTAGE RANGE UP TO ±0V SPLIT SUPPLY HIGH OUTPUT POER 0 0 @ THD =0%, RL =Ω, VS =V NO POP AT TURNON/OFF MUTE (POP FREE) STANDBY FEATURE (LO I q ) THERMAL
300MHz, Low-Power, High-Output-Current, Differential Line Driver
9-; Rev ; /9 EVALUATION KIT AVAILABLE 3MHz, Low-Power, General Description The differential line driver offers high-speed performance while consuming only mw of power. Its amplifier has fully symmetrical
LM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
TL081 TL081A - TL081B
TL081 TL081A - TL081B GENERAL PURPOSE J-FET SINGLE OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
Dual Picoampere Input Current Bipolar Op Amp AD706. Data Sheet. Figure 1. Input Bias Current vs. Temperature
Data Sheet Dual Picoampere Input Current Bipolar Op Amp Rev. F Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by
TDA1904 4W AUDIO AMPLIFIER
4W AUDIO AMPLIFIER HIGH OUTPUT CURRENT CAPABILITY PROTECTION AGAINST CHIP OVERTEM- PERATURE LOW NOISE HIGH SUPPLY VOLTAGE REJECTION SUPPLY VOLTAGE RANGE: 4V TO 20V DESCRIPTION The TDA 1904 is a monolithic
6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable
99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using
LS404 HIGH PERFORMANCE QUAD OPERATIONAL AMPLIFIER
HIGH PERORMANCE QUAD OPERATIONAL AMPLIIER SINGLE OR SPLIT SUPPLY OPERATION LOW POWER CONSUMPTION SHORT CIRCUIT PROTECTION LOW DISTORTION, LOW NOISE HIGH GAINBANDWIDTH PRODUCT HIGH CHANNEL SEPARATION DESCRIPTION
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5
Four-Channel, Four-Quadrant Analog Multiplier MLT04
THD NOISE % a FEATURES Four Independent Channels Voltage IN, Voltage OUT No External Parts Required 8 MHz Bandwidth Four-Quadrant Multiplication Voltage Output; W = ( Y)/. V.% Typical Linearity Error on
Low-Cost, High-Voltage, Internally Powered OUTPUT ISOLATION AMPLIFIER
Low-Cost, High-Voltage, Internally Powered OUTPUT ISOLATION AMPLIFIER FEATURES SELF-CONTAINED ISOLATED SIGNAL AND OUTPUT POWER SMALL PACKAGE SIZE: Double-Wide (.6") Sidebraze DIP CONTINUOUS AC BARRIER
PHYS225 Lecture 15. Electronic Circuits
PHYS225 Lecture 15 Electronic Circuits Last lecture Difference amplifier Differential input; single output Good CMRR, accurate gain, moderate input impedance Instrumentation amplifier Differential input;
2 REV. C. THERMAL CHARACTERISTICS H-10A: θ JC = 25 C/W; θ JA = 150 C/W E-20A: θ JC = 22 C/W; θ JA = 85 C/W D-14: θ JC = 22 C/W; θ JA = 85 C/W
a FEATURES Pretrimmed to.0% (AD53K) No External Components Required Guaranteed.0% max 4-Quadrant Error (AD53K) Diff Inputs for ( ) ( Y )/ V Transfer Function Monolithic Construction, Low Cost APPLICATIONS
High Voltage, Current Shunt Monitor AD8215
High Voltage, Current Shunt Monitor AD825 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead
Low Cost 100 g Single Axis Accelerometer with Analog Output ADXL190*
a FEATURES imems Single Chip IC Accelerometer 40 Milli-g Resolution Low Power ma 400 Hz Bandwidth +5.0 V Single Supply Operation 000 g Shock Survival APPLICATIONS Shock and Vibration Measurement Machine
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 22W BTL OR 2 11W STEREO POWER AMPLIFIER DESCRIPTION The UTC TDA1519C is an integrated class-b dual output amplifier with gain fixed at 40dB. It s packed in a 9-lead plastic
Quad Current Controlled Amplifier SSM2024
a Quad Current Controlled Amplifier FEATURES Four VCAs in One Package Ground Referenced Current Control Inputs 82 db S/N at 0.3% THD Full Class A Operation 40 db Control Feedthrough (Untrimmed) Easy Signal
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
TDA W AUDIO AMPLIFIER
TDA2006 12W AUDIO AMPLIFIER DESCRIPTION The TDA2006 is a monolithic integrated circuit in Pentawatt package, intended for use as a low frequency class "AB" amplifier. At ±12V, d = 10 % typically it provides
LM384 5W Audio Power Amplifier
5W Audio Power Amplifier General Description The LM384 is a power audio amplifier for consumer applications. In order to hold system cost to a minimum, gain is internally fixed at 34 db. A unique input
PART MAX4144ESD MAX4146ESD. Typical Application Circuit. R t IN- IN+ TWISTED-PAIR-TO-COAX CABLE CONVERTER
9-47; Rev ; 9/9 EVALUATION KIT AVAILABLE General Description The / differential line receivers offer unparalleled high-speed performance. Utilizing a threeop-amp instrumentation amplifier architecture,
Internally Trimmed Integrated Circuit Multiplier AD532
a Internally Trimmed Integrated Circuit Multiplier AD53 FEATURES PIN CONFIGURATIONS Pretrimmed to.0% (AD53K) Y No External Components Required Y V Guaranteed.0% max 4-Quadrant Error (AD53K) OS 4 +V S OUT
UNISONIC TECHNOLOGIES CO., LTD 4052 CMOS IC
UNISONIC TECHNOLOGIES CO., LTD 4052 CMOS IC DIFFERENTIAL 4-CHANNEL ANALOG MULTIPLEXERS/ DEMULTIPLEXERS DESCRIPTION The UTC 4052 is differential 4-channel analog multiplexers/ demultiplexers for application
Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION
Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8273 FEATURES ±4 V HBM ESD Very low distortion.25% THD + N (2 khz).15% THD + N (1 khz) Drives 6 Ω loads Two gain settings Gain of
Quad Audio Switch REV. B BLOCK DIAGRAM OF ONE SWITCH CHANNEL
a FEATURES CIickless Bilateral Audio Switching Four SPST Switches in a -Pin Package Ultralow THD+N:.8% @ khz ( V rms, R L = k ) Low Charge Injection: 3 pc typ High OFF Isolation: db typ (R L = k @ khz)
LM4562 Dual High Performance, High Fidelity Audio Operational Amplifier
October 2007 Dual High Performance, High Fidelity Audio Operational Amplifier General Description The is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 2 X 12 W HI-FI AUDIO POWER AMPLIFIERS WITH MUTE LINEAR INTEGRATED CIRCUIT DESCRIPTION The UTC PA2616 is dual power amplifiers which the supplied in a 9-lead plastic power
TDA7269A W STEREO AMPLIFIER WITH MUTE & ST-BY
TDAA STEREO AMPLIFIER ITH MUTE & STBY IDE SUPPLY VOLTAGE RANGE UP TO ±0V SPLIT SUPPLY HIGH OUTPUT POER @ THD =0%, RL =Ω,VS= V NO POP AT TURNON/OFF MUTE (POP FREE) STANDBY FEATURE (LO I q ) SHORT CIRCUIT
TDA W STEREO AMPLIFIER WITH MUTE & ST-BY
TDA7265 25 25W STEREO AMPLIFIER WITH MUTE & STBY WIDE SUPPLY VOLTAGE RANGE (UP TO ±25V ABS MAX.) SPLIT SUPPLY HIGH OUTPUT POWER 25 25W @ THD =10%, RL =8Ω,VS= 20V NO POP AT TURNON/OFF MUTE (POP FREE) STANDBY