PRICES SUBJECT TO CHANGE FUNTEC MODELS

Transcription

1 FUNTEC MODELS Sky Scooter Aircraft Sky Scooter Pro II RTF (Ready to Fly) Sky Scooter Kit With Motor (No Radio or Electronics) Sky Scooter Parts and Accessories Fuselage Set: Fuselage, Belly Landing Skid, Dowel and Rubber Band Wing Set: Wing With Hardware (Horn, Hinges and Pins) Stabilizers: Vertical and Horizontal Stabilizers With Elevator, Hardware and Double-Sided Tape Blade Set For Indirect Drive Beginner Version Entire Folding Prop Set: 9.95 Prop Blades, Spinner, Hub & 2 Hub Spacers, 2 Screws, 2 Set-Screws & Hex Wrench Prop Hub and Spinner Set: 7.95 Spinner, Hub & 2 Hub Spacers, 2 Screws Gearbox Accessory Set: Gear Box, Motor Plate, Pinion Gear, Shaft, 2 Set Screws and Bushings Motor For Gear Reduction-Beginner Version Speed 400 Motor With Pinion Gear and Capacitors Installed Linkage Set 9.95 Elevator & Aileron Link Rods With 3 Clevises Decal Sheet Two Decal Sheet For Aircraft Paint Scheme Safety Switch 9.95 Micro Safety Switch Assembly mah Battery Pack Cell, 300mah Ni-Cd Battery With Connector mah Battery Pack Cell, 600mah Ni-Cd Battery With Connector Direct Drive Prop With Spinner For Pro Version Motor For Direct Drive Pro Version Single Blade Set for Sky Scooter Pro II Gearbox with Folding Propeller and motor (Combo) Entire Folding Prop Set for Sky Scooter Pro II 9.95 Prop Blades, Spinner, Hub & 2 Hub Spacers, 2 Screws, 2 Set-Screws & Hex Wrench Sky Scooter Pro II Decal Sheet CG-84S DC Timer Charger For Sky Scooter HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 1 of 10

2 AIRCRAFT SYSTEMS Focus 3 SS AM Single Stick 3 Channel 27 & 72 MHz Systems Proportional 3rd channel, channel 1-2 mixing switch for V-tail or elevons, micro switch & AAA battery holder. System sold without batteries. Requires 8 AA batteries for TX and 4 AAA batteries for RX. Not available on 72 MHz channels FOCUS 3 SS 72MHz HAS-03MB RX, 2 HS-322 Standard Servos FOCUS 3 SS-Mini 72MHz HAS-03MB RX, 2 HS-81Micro Servos Focus 3 SS FM Single Stick 3 Channel 72 MHz Systems N FOCUS 3 SS-FM, HAS-04MG RX, 2 HS-81 Micro Servos, Dry system, No Ni-Cd's N FOCUS 3 SS-FM, Feather RX, 2 HS-55 Feather Servos, Dry system, No Ni-Cd's N FOCUS 3 SS-FM, HAS-04MG RX, 2 HS-55 Feather Servos, Dry system, No Ni-Cd's Neon FM Single Stick 3 Channel 72 MHz Radio Systems New 3 Channel Single Stick Radio Upgradeable to 4 Channels N Neon SS-FM, Electron RX, & 2 HS-81 Micro Servos, Complete with Ni-Cd & overnight Charger N Neon SS-FM, 04MG RX, & 2 HS-55 s, Dry system, no Ni-Cd N Neon SS-FM, Electron 6 RX, & 2 HS-55 s, Complete with Ni-Cd & overnight Charger Neon FM Upgrade Options N Channel 1, 2 and 3 ATV Option N Trainer Plug and Switch Option N Channel 1 and 2 Dual Rate Option (Must Combine with Part# 54302, ATV Option) 7.95 N Channel 4, Three Position switch Option 7.95 N Dry battery tray for Neon 9.95 Laser 4 & Laser 6, 4 & 6 Channel 72MHz FM Radio Systems Laser Series Include: full Ni-Cd, overnight charger, and are trainer ready LASER 4FM, 4-Ch, Supreme RX, 4 HS-322 Servos, 2 ATVs & 600 mah Pack LASER 4FM, 4-Ch, "555" RX, 3 HS-81 Servos, 2 ATVs & 270 mah Pack LASER 4FM, 4-Ch," Feather+" RX. 2-HS-55 Servos, 2 ATVs & AAA "dry" battery holder LASER 6FM, 6-Ch, Supreme RX, 4 HS-422 Servos, ATVs, Full Throttle EPA Flash 4 & 5 System X Series 4 & 5 Ch. 72MHz FM Computer Radio Systems Flash SX Series include: 5 model memory, full Ni-Cd, overnight charger, and are trainer ready FLASH 4 SX FM, 4-Channels, Supreme RX, 3 HS-322 Servos FLASH 4 SX-G 4-Channel Glider Version Micro "555" RX, 2 HS-81 Servos, & 270mAh Receiver Ni-Cd FLASH 5 SX FM, 5-Channels, Super Slim RX, 4 HS-422 Servos, Acro, Glider and Glider/Acro Flight Modes. FLASH 5 SX-G 5-Channel Glider Version Same Features as Flash 5SX Except with Micro "555" RX, 3 HS Servos, & 270mAh Receiver Ni-Cd Eclipse 7, 7 Channel FM 72MHz, 7 Model Memory, 3 in 1 Computer Radio systems ECLIPSE FM, 7-Ch Computer Radio, Supreme RX, 4 HS-422 servos, & 600mAh RX Battery ECLIPSE-Spectra FM, 7-Ch Computer Radio w/spectra, Super Slim RX, 4 HS-425 servos, 650mAh RX Battery, & Heavy Duty Switch Harness.*** ECLIPSE FM Heli, 7-Ch Computer Radio, Supreme RX, 5 HS-425BB servos, 1000mAh RX Battery, & Heavy Duty Switch Harness ECLIPSE Transmitter with Spectra and Overnight Wall Charger.*** N ECLIPSE PCM Airplane version w/4 HS 422 servos, 7ch HPD-07RH RX, 600 mah RX battery N ECLIPSE PCM Heli version w/ 5 HS-425BB servos, 7ch HPD-07RH RX, 1000 mah RX battery N ECLIPSE PCM Spectra version w/ HPD-07RH RX only, and Overnight Wall Charger*** ***Spectra Version not available with channel choice*** Frequency Modules (plug-in type) for Eclipse & Prism Transmitters 72MHz RF Module Single Channel for FM ECLIPSE, FM & PCM PRISM Systems, Must Specify Channel SPECTRA 72 Synthesized Module, for FM ECLIPSE, FM & PCM PRISM Systems HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 2 of 10

3 SURFACE SYSTEMS Ranger 2N 2 Channel AM Stick Radio Series Ranger 2N systems are sold without batteries. Requires 8 AA batteries for transmitter and 4 AA batteries for receiver RANGER 2N 27MHz, HP-2RNB RX, 2 HS-311 Standard Servos RANGER 2N 75MHz, HP-2RNB RX, 2 HS-311 Standard Servos Ranger III FM 3 Channel FM Stick Radio Systems Ranger III systems are sold without batteries. Requires 8 AA batteries for transmitter and 4 AA batteries for receiver RANGER 3 FM 75MHz, 3 Ch, HFS-03MM RX, 2 HS-311 Servos, ATV's Lynx Sport 2 Channel Pistol Grip Sport AM Radio Systems Lynx Sport systems are sold without batteries. Requires 8 AA batteries for transmitter and 4 AA batteries for receiver LYNX SPORT 27MHz AM, HP-2RNB RX, w/ 2 HS-311 Servos LYNX SPORT 75MHz AM, HP-2RNB RX, w/ 2 HS-311Servos LYNX SPORT 75MHz AM, HP-2RNB RX, w/ 1 HS-311 Servos & SP way ESC LYNX SPORT 75MHz AM, HP-2RNB RX, w/ 1 HS-311 Servos Lynx AM Series 2 Channel AM Pistol Grip Radio Systems Lynx AM systems include dual rates w/ override button, switch harness and battery box. Systems are sold without batteries. Requires 8 AA batteries for transmitter and 4 AA batteries for receiver. D LYNX AM, Pistol 27MHz, HAS-2MB RX, 2 HS-311 Servos D LYNX AM, Pistol 75MHz, HAS-2MB RX, 2 HS-311 Servos D LYNX AM, Pistol 75MHz, HAS-2MB RX, 1 HS-311 Servos Lynx FM Series 2 Channel FM Pistol Grip Radio Systems Lynx FM systems include adjustable dual rate steering w/override button, throttle EPA, switch harness and battery box. Systems are sold without batteries. Requires 8 AA batteries for transmitter and 4 AA batteries for receiver. D LYNX FM, 27MHz, HFS-03MM RX, 1 HS-311BB Ball Bearing Servo D LYNX FM, 75MHz, HFS-03MM RX, 1 HS-311BB Ball Bearing Servo Aggressor AM 2 Channel Pistol Grip Radio Systems AGRRESSOR AM, 27MHz, HAS-02MB RX, 2 HS-311 Servos AGGRESSOR AM, 75MHz, HAS-02MB RX, 2 HS-311 Servos AGGRESSOR AM, 75MHz, HAS-02MB RX, EZX-R Reversible ESC, 1 HS-311 Servo AGGRESSOR AM, 75MHz, HAS-02MB RX, 1 HS-311 Servo Aggressor FM 3 Channel Pistol Grip Radio Systems N AGGRESSOR FM, 75MHz, HFS-03MM RX, 1 HS-325HB Servo N AGGRESSOR FM, 27MHz, HFS-03MM RX, 1 HS-325HB Servo Aggressor AM & FM Upgradeable Options N Tuning cover set for Aggressor (Paintable clear, Red, Blue) 5.95 N Tuning cover for Aggressor (Camouflage) 3.95 N Tuning cover for Aggressor (Silver Carbon) 3.95 N Grip pad thin set(3t/blue,red,black) 9.95 N Grip pad thick set (5T/blue,red,black) 9.95 Aggressor CRX N MHz TX., DCX receiver, 1 HS-325HB servo, TX. Ni-Cd and charger N MHz TX., DCX receiver, 1 HS-325HB servo, TX Ni-Cd and charger N MHz Transnitter only w/spectra, TX Ni-Cd and charger N MHz Transnitter only w/spectra, DCX RX, TX Ni-Cd and charger N MHz Transnitter only w/spectra, NOVAK Receiver, TX Ni-Cd and charger Lynx 3D Series 3 Channel FM Computer Pistol Radio System D LYNX 3D 27MHz, w/tx Ni-Cd and Charger, DCX Receiver, & NO Servos D LYNX 3D 75MHz, w/tx Ni-Cd and Charger, DCX Receiver, & NO Servos D LYNX 3D 75MHz Spectra Module and 3 Random RX Crystals, Transmitter Ni-Cd, DCX Receiver NO Laser 4 & Laser 6, 4 & 6 Channel 75MHz FM Two Stick Radio Systems LASER 4 FM 75MHZ, w/tx Ni-Cd and Charger, 2 HS-322 Servos LASER 6 FM 75MHZ, w/tx Ni-Cd and Charger, 2 HS-322 Servos Frequency Modules (plug-in type) for Lynx 3D Transmitter SPECTRA 75 Synthesized RF Module for LYNX 3D Only, (All 30 Channels) ## 27m LYNX 3D RF Module FM Comes with Crystal, Must Specify Channel ## 75m LYNX 3D RF Module FM Comes with Crystal, Must Specify Channel HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 3 of 10

4 DUAL CONVERSION FM RECEIVERS Only Use Hitec Crystals HPD-07RB 72MHz 7 Channel Dual Conversion PCM Receiver HPD-07RB PCM for PRISM 7 & 7X only N HPD-07RH Q-PCM for Eclipse 7 only Electron 6 72MHz 6 Channel Dual Conversion FM Receivers Dual conversion micro receiver Electron 6 NEGATIVE SHIFT - Use with Hitec & Futaba Electron 6 POSITIVE SHIFT - Use with JR/Airtronics "Z" Micro MHz 5 Channel Dual Conversion FM Receivers Micro 555 receivers"y" harness required for use of 5th. Channel RCD Futaba "J" Compatible RCD Hitec "S" Compatible (U-Hole) RCD JR/Airtronics "Z" Compatible Supreme 72MHz 7 & 8 Channel Dual Conversion FM Receivers Supreme receivers require a "Y" Harness to use 7th or 8th channel RCD Channel Futaba "J" Compatible RCD Channel Hitec "S" (U-Hole) Compatible RCD Channel JR/Airtronics "Z" Compatible RCD Channel (Shift Selectable) / U-Hole Works with Hitec / Futaba / JR and Airtronics Super-Slim receivers require a "Y" Harness to use 8th channel Futaba "J" Compatible Hitec "S" Compatible (U-Hole) JR / Airtronics "Z" Compatible DCX 3 Channel 27 & 75MHz Dual Conversion FM Receivers DCX 27MHz - Universal: for use with all 27MHz FM Transmitters DCX 75MHz - Negative Shift: for use with Hitec and Futaba 75MHz FM Transmitters DCX 75MHz - Positive Shift: for use with Airtronics, KO Propo, & JR Transmitters HFS-03MM 27 or 75MHz 3 Channel Single Conversion FM Receivers HFS-03MM 27MHz, 3 Channel, for use with all FM Radios L HFS-03MM 75MHz, 3 Channel, for use with all FM Radios HFS-04MG 72MHz 4 Channel Single Conversion FM Receiver HFS-04MG 72MHz, 4 Channel, for use with FOCUS 3 FM and Other Brand Negative Shift FM Radios HFS-04MG 72MHz, 4 Channel, Posative Shift FM Radios HIS-03MK 75MHz 3 Channel Single Conversion IPD Receiver N N Supreme Super-Slim 72MHz 8 Channel Dual Conversion FM Receivers SINGLE CONVERSION FM RECEIVERS Only Use Hitec Crystals Feather 4 Channel 72MHz Single Conversion FM Receiver Requires "Y" Harness to use 4th Channel Feather NEGATIVE SHIFT - Use with Hitec & Futaba Feather POSITIVE SHIFT - Use with JR/Airtronics "Z" SINGLE CONVERSION AM RECEIVERS Only Use Hitec Crystals HP-2RNB 2 Channel AM Receiver HP-2RNB 75MHz, 2 Channel AM HP-2RNB 27MHz, 2 Channel AM HAS-2MB 2 Channel AM Receiver HAS-2MB 27MHz, 2 Channel AM HAS-2MB 72MHz, 2 Channel AM HAS-2MB 75MHz, 2 Channel AM HAS-3MB 3 Channel AM Receiver HAS-3MB 27MHz, 3 Channel AM HAS-3MB 72MHz, 3 Channel AM HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 4 of 10

5 GENUINE HITEC RCD FREQUENCY CRYSTALS 27 MHz Transmitter and Receiver Frequency Crystals 66427## 27 MHz AM & FM Single Conversion Receiver ## 27 MHz FM Dual Conversion Receiver for DCX ## 27 MHz AM - for all 27MHz AM Transmitters ## 27 MHz FM - for all 27MHz FM Transmitters MHz Transmitter and Receiver Frequency Crystals 66472## 72 MHz AM & FM Single Conversion Receiver ## 72 MHz AM & FM Dual Conversion Receiver ## 72 MHz AM - for all 72MHz AM Transmitters ***HITEC DOES NOT OFFER 72 MHz "FM" TRANSMITTER CRYSTALS*** 75 MHz Transmitter and Receiver Frequency Crystals 66475## 75 MHz AM Single Conversion Receiver ## 75 MHz FM Single Conversion Receiver ## 75 MHz FM Dual Conversion Receiver ## 75MHz AM - for all 75MHz AM Transmitters ## 75 MHz FM - for LYNX FM, RANGER FM, & LYNX 3D Transmitters FLIGHT PACKS Combines the most popular servos with the most popular receivers. Good value for you and your customers! Popular Pack = Supreme (Shift Selectable) RX, 4 HS-425BB, 600mA RX Ni-Cd, & Switch Harness Micro Pack-Negative = "555" RX, 3 HS-81, 270mA RX Ni-Cd, & Switch Harness Micro Pack-Positive = "555" RX, 3 HS-81, 270mA RX Ni-Cd, & Switch Harness Feather Pack-Negative = Feather RX, 2 HS-55, & Switch Harness Feather Pack-Positive = Feather RX, 2 HS-55, & Switch Harness N Electron 6-Negative = Electron 6 RX, 3 HS-56 & Switch Harness N Electron 6-Positive = Electron 6 RX, 3 HS-56 & Switch Harness N HFS-04MG Negative = HFS-04MG RX, 3 HS-55 & Swith Harness N HFS-04MG Positive = HFS-04MG RX, 3 HS-55 & Swith Harness HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 5 of 10

6 SERVOSAll 6 Volts, #=Specify S or J Plug High Speed & High Torque Micro & Mini Servos 31050# HS-50 Feather Ultra Micro Servo (9oz/in,.09 sec, 0.82x0.44x0.86")(4.8 volt only) # HS-55 Economy Sub Micro Servo (16 oz/in, 0.16sec,.9x.46x0.95) N 33056# HS-56HD Sub Micro KARBONITE Servo ( ) # HS-60 Super Micro Servo (18 oz/in,.16 sec, 0.9x0.5x1.0") # HS-81 Micro Servo ( 38 oz/in,.10 sec, 1.2x0.48x1.2") # HS-81MG Micro Metal Gear ( 38 oz/in,.10 sec, 1.2x0.48x1.2") # HS-85BB+ Mighty Micro, Ball Bearing (49 oz/in,.13 sec, 1.1x0.5x1.1") # HS-85MG+ Mighty Micro Metal Gear, Ball Bearing ( 49 oz/in,.13 sec, 1.0x0.5x1.1") # HS-125MG Wing Servo Metal Gear, Ball Bearing (42 oz/in, 17sec., 1.18x0.39x1.33") # HS-225BB Mighty Mini, Ball Bearing (67 oz/in,.11 sec, 1.3x0.7x1.3") # HS-225MG Mighty Mini Metal Gear, Ball Bearing (67 oz/in,.11 sec, 1.3x0.7x1.3") Standard Sport Servos 31311# HS-311 Standard (42 oz/in,.19 sec., 1.57x0.78x1.43") # HS-322HD Standard Deluxe (42 oz/in,.19 sec., 1.57x0.78x1.43") # HS-325HB Standard (42 oz/in,.19 sec., 1.57x0.78x1.43") Standard Deluxe Servos 31422# HS-422 Iron/Oilite Bushing (52 oz/in,.17 sec,1.4x0.8x1.6") # HS-425BB w/dual Ball Bearings (52 oz/in,.17 sec., 1.4x0.8x1.6") # HS-475HB Standard Deluxe (61 oz/in,.23 sec., 1.52x.077x1.41") High Speed and High Torque Servos 31077# HS-77BB Low Profile, Ball Bearing (77 oz/in,.14 sec, 0.9x1.0x1.7") # HS-525BB High Speed 5-Pole, Ball Bearing (55 oz/in,.12 sec, 1.4x0.8x1.5) # HS-525MG Metal Gear 5-Pole, Ball Bearing (55 oz/in,.12 sec, 1.5x0.8x1.4") # HS-545BB High Torque 5-Pole, Ball Bearing (73 oz/in,.17 sec 1.4x0.8x1.5) D 31605# HS-605BB High Torque, Dual Ball Bearing (91 oz/in,.13 sec.,1.5x0.8x1.6") N 33635# HS-635HB # HS-625MG Ultra Speed Metal Gear, Dual Ball Bearing (93 oz/in,.13 sec, 1.59x0.77x1.48") # HS-645MG Super Torque Metal Gear, Dual Ball Bearing (133 oz/in,.18 sec, 1.59x0.77x1.48") # HS-925MG High Speed Metal Gear, Coreless, Dual Ball Bearing (103oz/in,.08sec., 1.5x0.8x1.5") # HS-945MG High Torque Metal Gear, Coreless, Dual Ball Bearing (153oz/in,.12sec.,1.5.x.8x1.5") Digital High Speed & Torque Servos 35125# HS-5125MG Wing Servo, Metal Gear, Digital, Ball Bearing (42oz/in,.17sec., 1.18x0.39x1.33") # HS-5245MG Mighty Mini, Metal Gear, Digital, Ball Bearing (61oz/in,.15sec., 1.27x0.66x1.21" ) # HS-5625MG High Speed, Metal Gear, Digital, Dual Ball Bearing (93oz/in,.13sec., 1.59x0.77x1.48") # HS-5645MG High Torque, Metal Gear, Digital, Dual Ball Bearing (133oz/in,.18sec.,1.55x0.77x1.48") # HS-5735MG High Torque, Metal Gear, Digital, Three Ball Bearing, (250oz/in,.15ces., 2.3 x 1.1 x 2.0") # HS-5925MG High Speed, Metal Gear, Digital, Coreless, Dual BB, (128oz/in,.08sec., 1.55x0.78x1.48") # HS-5945MG High Torque, Metal Gear, Digital, Coreless, Dual BB, (180oz/in,.13sec., 1.55x0.78x1.48") # HS-5475HB Heavy Duty Gear, Digital, (61oz/in,.28sec., 1.52x0.77x1.41") # HS-5975HB Heavy Duty Resin Gear, Digital, (91.6oz/in,.13sec., 1.57x0.78x1.45") Quarter Scale Servos D 31700# HS-700BB Giant Scale, Ball Bearing (161 oz/in,.19 sec., 2.0x1.1x2.3") N 33755# HS-755HB # HS-705MG Giant Scale, Metal Gear, Ball Bearing (189 oz/in,.22 sec. 2.0x1.1x2.3") # HS-805BB Mega Servo, Dual Ball Bearing (320 oz/in,.16 sec, 2.2x1.2x2.4") Specialty Servos 31075# HS-75BB Retract Servo, Ball Bearing (110oz/in,.40 sec.,1.7x0.9x1.0") # HS-715BB Sail Arm, Ball Bearing (189 oz/in,.22 sec/60deg. 2.3x1.1x2.0") # HS-725BB Sail Winch, 3.5 Turn, Ball Bearing (193 oz/in, 1.3 sec/360deg. 2.3x1.1x2.0") # HS-815BB Mega Sail Arm Servo, Dual Ball Bearing (280 oz/in,.38 sec./140deg 2.6x1.2x2.3) DIGITAL SERVO PROGRAMMER HFP-10 Hitec Digital Servo Programmer and Servo Tester HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 6 of 10

7 SPEED CONTROLS & ON/OFF SWITCHES 2 Way with reverse for Surface Systems HFX-R High Frequency Reversible ESC S SP-520+ All MOS-FET, Heat & Polarity Protected S SP-560 All MOS-FET, Power ESC for Modified Motors SP-610RF Scale Boat Speed Control 6-7.2V, 6-10 Amp Fused Hitec S/JR Only, (NO BEC Connector) EZX-R 2 Way, 46A, 23 Turns, Compact Design, Built-In Power Switch EZX-R PRO 2 Way, 90A, 17 Turns, Compact Design, Built-In Switch, Silicon Wire, One-Push Way for Surface Systems HFX High Frequency Speed Control with Ultra Efficient MOS-FET, Thermal Protection Way for Aircraft Systems SP-1010 Speed Control, BEC w/auto Cutoff, Brake, 10A Continuous, Card Type w/bec Auto Cutoff & On Off Switches for Aircraft Systems SP Motor Switch to use with our BEC Equipped HAS-2MB, HAS-3MB or HP2RNB Receivers SP Throttle Control on/off Switch BEC w/auto Cutoff, Volts, 20 Amps CHARGERS & SET-UP EQUIPMENT AC Overnight Chargers CG-25 Overnight Charger for all Hitec Radio Systems (TX & RX), 110V J CG-25A Overnight Charger for Futaba Systems ( TX & RX ) 110v CG-22 Overnight Charger (TX & RX), 220V DC to DC Chargers CG-335 Multi Peak Charger 4-24 Cells, 12V Input, Digital Readout, Charge TX & RX at the Same Time CG-335 Pro Multi Peak Ni-Mh Charger 4-24 Cells, 12V Input, Digital Readout, Charge TX & RX at the N Same Time CG-340 Multi Ni-Cd and NiMh Peak Charger, 4-16 cells, MAh CG Minute Timer 6 cell (7.2v) Set-up Equipment POWERMATE II, 4-5 Cell Receiver Battery Tester JAM CHECKER, Servo Load Tester Ni-Cd PACKS FOR TRANSMITTER & RECEIVER Receiver Ni-Cd Packs D mA 4.8V Flat Pack (Sanyo) mA 4.8V Flat Pack (Hitec) mA 4.8V Flat Pack (Hitec) D mA 4.8V Flat Pack (Sanyo) mA 4.8V Flat Pack (Hitec) mA 4.8V Square Pack (Hitec) mA 4.8V Square Pack (Hitec) Transmitter Ni-Cd Packs mA, 10.8V, MASTER & CHALLENGER Series mA, 9.6V, FOCUS 4 & 6, LYNX 3D mA, 9.6V, FLASH, PRISM, LASER 4 & 6 and ECLIPSE 7, LYNX FM & FOCUS 2 & HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 7 of 10

8 SERVO ACCESSORIES Servo Resin Gear Sets HS-50 Gear Set HS-55 Gear Set HS-60 Gear Set HS-75BB Gear Set HS-77BB Gear Set HS-81 Gear Set HS-80/101 Gear Set (Servos Discontinued) HS-85BB Gear Set HS-205BB/225 Gear Set HS-300/303/300BB Gear Set HS-311/322/325BB Gear Set HS-322HD/325HB Gear Set HS-422/425 Gear Set HS-525BB Gear Set HS-545BB Gear Set HS-475HB/5475HB Gear Set HS-605BB Gear Set HS-700BB Gear Set HS-715BB Gear Set HS-725BB Gear Set HS-805BB/815BB Gear Set HS-5975HB Gear Set 9.95 Servo Metal Gear Sets HS-80 / HS-101 Metal Gear Set (Servos Discontinued) HS-81 Metal Gear Set (ALL Metal Gears) HS-85 Metal Gear Set HS-205MG / 225MG Metal Gear Set HS-235 Aluminum Gear Set (Servo Discontinued) HS-525 Metal Gear Set HS-605MG Metal Gear Set (Servo Discontinued) HS-615MG Metal Gear Set (Servo Discontinued) HS-625MG / 5625MG, Metal Gear Set (MP First Gear) HS-645MG / 5645MG, Metal Gear Set (MP First Gear) HS-705MG Metal Gear Set HS-5735MG Metal Gear Set (MP First Gear) HS-925MG / 5925MG Metal Gear Set (MP First Gear) HS-945MG / 5945MG Metal Gear Set (MP First Gear) HS-5125MG / 125MG Metal Gear Set Servo Cases HS-50 Case - Black HS-50 Case - Clear "Nude" Blue HS-55 Case - Black HS-55 Case - Clear "Nude" Blue HS-60 Case HS-75BB / 77BB Case HS-80 Case (Servo Discontinued) HS-81 Case HS-85BB Case HS-101 Case (Servo Discontinued) HS-205BB / 205MG / 225BB / 225MG / 235AG / 5245MG Case HS-300 Case HS-303 Case HS-422 / 425 Case HS-311 / 322 / 325BB / 322HD / 5975HB Case HS-422 / 425BB / 475HB / 5475HB Case HS-525BB / 545BB Case HS-605BB / 605MG / 615MG Case (Servos Discontinued) HS-625MG / 645MG / 5625MG / 5645MG Case HS-700 / 705MG / HS-715 Case HS-725BB Case HS-5735MG Case (WITHOUT Heat-Sink) HS-805BB+ / 815BB Case HS-925MG / 945MG / 5925MG / 5945MG Case HS-5125MG / 125MG Case 9.87 N HS-475HB/5HS-5475HB Case 6.97 N HS-5975 HB Case 6.97 Servo Horn Screw Sets N Resin Gear Servo Horn Screw Set 5pcs ( Series) & 5pcs ( Series) 1.17 N Metal Gear Servo Horn Screw Set 5pcs (80MG-200MG) & 5pcs (500MG-700MG Series) 1.17 HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 8 of 10

9 SERVO ACCESSORIES Servo Horns & Hardware HS-50/55 Horn Set Micro Horn Set HS-60/80/81/85BB/ Micro Horn & Hardware Set HS-60/80/81/85BB/ HS-303 ( 2 pcs. ) Horn Set HS-303 Hardware Set Standard Horn Set (Fits all Standard Servos) Standard Servo Mounting Hardware Standard Horn & Hardware Set ( & Combination) Heavy Duty Horn Set (Does Not Fit HS-50 / 55 / 805 / 815) /4 Scale Mounting Hardware HS-700BB / 705 / 715 / 5735 / 805 / HS-715BB Sail Arm Sail Winch Drum & Hardware Set, HS-725BB HS-815BB Sail Arm Mega Horn & Hardware Set for HS-805 only Standard Metal Horn 3/4" (Single Sided) Heavy Duty Metal Horn 1" (Double Sided) N HS-125MG/HS5125MG Horn Set 3.95 N HS-5125MG Half Metal Horn 7.97 N Heavy Duty Servo Arms N Heavy Duty Servo Arms Bearing Sets Universal Iron/Oilite Bushing Set (4 pcs = 1 Servo) Universal Ball Bearing 1 piece Mega Servo Big Ball Bearing (Single Ball Bearing) For HS-805BB / 815BB 9.97 Miscellaneous Servo Accessories Servo Tray holds 2 & 3 Standard Size Servos Horizontal Wing Mount for HS-60 / 80 / 85BB / Wing Mount "Servo Can" for HS-85BB and Other Manufactures Micro Servos Servo Grease "Universal" ( for all Servos ) Kimbrough Servo Saver for car and Truck Steering TRANSMITTER ACCESSORIES Antenna Sets RANGER 2N / 3SS / FOCUS 2SS & 3SS Transmitters CHALLENGER 250 / 260 Transmitters FOCUS / FLASH / LYNX / AGGRESSOR SERIES Transmitters LASER 4 & 6 / ECLIPSE 7 / PRISM 7 Transmitters LYNX 3D Transmitter RANGER 2Z / LYNX Sport Transmitter Transmitter Miscellaneous and TX Battery Trays N TX Battery Holder for Neon SS FM 6.97 N TX Battery Holder for Aggressor Series Stick Extension for FOCUS, FLASH, PRISM, & ECLIPSE 7 Systems Trainer Cord, 1 way Transmitter Neck Strap DSC Cord for LYNX 3D (Direct Servo Control: For Testing Servo-Setup Without Having Your TX Turned Dry Battery Tray for LYNX 3D (Dry System-Stock #123754) Ni-Cd Tray for LYNX 3D (Use With TX Ni-Cd Battery Pack-Stock #58206) Transmitter Dry Battery Holder LYNX AM & FM, FOCUS 2 & 3, FLASH, LASER 4 & 6, Eclipse 7, & Ratchet for CHALLENGER 250, RANGER II, & RANGER III Ratchet for RANGER 2Z & 2N 1.97 N Antenna Frequency Flags (all channels) 3.95 RECEIVER ACCESSORIES Switch Harnesses & Battery Boxes 54407# Gold Pin/Heavy Duty Wire Switch Harness with RX Charge Connector for Aircraft Systems # Switch Harness with RX Charge Connector for Aircraft Systems AA Battery Box (4 Batteries) use with Switch Harness Switch Harness & Battery Box (57215 & 57216) for 72 MHz Systems AAA Battery Box for RX for Aircraft Systems (Holds 4 Batteries) Micro Switch Harness for Aircraft Systems AAA Battery Box (holds 4 Batteries) for RX & Micro Switch Harness (54402 & 54403) AA Battery Box (holds 4 Batteries) Use With Switch Harness for Surface Systems S Switch Harness for Battery Box for Surface Systems Switch Harness with Battery Box (57201 & ) for 75MHz Surface Systems Switch Harness with Built in BEC Circuit for Surface Systems Switch Harness for DSC for LYNX 3D (Direct Servo Control) HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 9 of 10

10 RX Antennas and Miscellaneous Green Antenna Wire With Bobbin for Feather Receiver Red Antenna Wire for Regular Surface Receiver Black Antenna Wire for Aircraft Receivers Except Feather Receiver Flight Preserver 2.97 WIRING ACCESSORIES # = Specify S or J Plug Heavy Duty Aileron Extensions/Heavy Duty Male & Female Servo Connectors 54601# Male Servo Connector with Heavy Gauge Wire, Gold Pins (Male Connector is used on Hitec Servos) # Female Servo Connector with Heavy Gauge Wire, Gold Pins # 6" Heavy Gauge Wire Aileron Extension with Gold Pins # 12" Heavy Gauge Wire Aileron Extension with Gold Pins # 24" Heavy Gauge Wire Aileron Extension with Gold Pins # 36" Heavy Gauge Wire Aileron Extension with Gold Pins 9.97 Aileron Extensions 57344# 6" Servo Extension # 12" Servo Extension # 24" Servo Extension # 36" Servo Extension 7.97 Heavy Duty "Y" Extensions 54701# 6" Heavy Duty "Y" Harness with Gold Pins # 24" Heavy Duty "Y" Harness with Gold Pins "Y" Extensions 57351# 6" "Y" Harness # 24" "Y" Harness Charger Wiring Accessories RX Battery Charge Cord & Plug Assembly TX Battery Charge Cord & Plug Assembly Charge Plug for FLASH, LASER 4 & 6, ECLIPSE 7, & PRISM Transmitter Batteries Hitec TX Charge Cord with Banana Plug Hitec RX Charge Cord with Banana Plug # RX & TX Charge Cord with Banana Jack (#=Connector Type: A=Airtronics, J=Futaba J, S=Hitec, JR=JR) Charging Adapter for 2 Channel Receiver Ni-Cd 5.97 Miscellaneous Wiring Connectors Lightweight Servo wire with Male "S" Connector Lightweight Servo wire with Female "S" Connector # Male Connector with 9" Servo Wire # Female Connector with 9" Servo Wire ft., 3 color Heavy Gauge Servo Wire, 20 Gauge ft., 3 Color Servo Wire, 22 Gauge, 30 Strand Meter, 3 color Servo Wire, 22 Gauge, 30 Strand Female B.E.C. Connector Male B.E.C. Connector Battery Connectors for Tamiya / Kyosho (Unwired) Motor Connectors, 2 Female, 2 Male Battery Connectors for Tamiya / Kyosho (1 pair wired) Motor Connector (1 Pair) Male & Male Tamiya Battery Extension Connector Female & Female Tamiya Battery Extension Connector Male "S" Connector (Housing and Pins Only) One Set Male "S" Connector (Housing and Gold Pins) One Set 2.97 N Female TX Battery Connector W/ Pigtail 1.57 PROMOTIONAL ITEMS Hitec Logo Merchandise Hitec Logo Hat (embroidered) # Hitec Logo T-Shirt - Replace # with A=Medium, B=Large, C= Xlarge, D=XX-Large Hitec Logo Decal Sheets (5 pieces) Hitec Logo Banner (3' x 6') N 59622B Hitec Logo Black & Red Vinal Decal 6" (2 Pieces) 8.97 N 59622W Hitec Logo White & Red Vinyl Decal 6" (2 Pieces) 8.97 N 59623B Hitec Logo Black & Red Vinal Decal 12" (2 Pieces) N 59623W Hitec Logo White & Red Vinyl Decal 12" (2 Pieces) N 59624B Hitec Logo Black & Red Vinal Decal 24" (2 Pieces) N 59624W Hitec Logo White & Red Vinyl Decal 24" (2 Pieces) N 59625B Hitec Logo Black & Red Vinal Decal 36" (2 Pieces) N 59625W Hitec Logo White & Red Vinyl Decal 36" (2 Pieces) HITEC PRICE LIST EFFECTIVE APRIL 1ST 2003 Page 10 of 10