43in EPP Acrocub Instruction Manual

Size: px
Start display at page:

Download "43in EPP Acrocub Instruction Manual"

Transcription

1 43in EPP Acrocub Instruction Manual Specifications Wingspan: 43.3in (1100mm) Length: 41.3in (1050mm) Flying Weight: Approx. 1.5lb (670g)

2 Dear Customer, Congratulations on your purchase of 43in EPP Acrocub Kit from Value Hobby. We thank you for your generous support, and hope you enjoy your new airplane. At Value Hobby, we hope to offer competitive prices, good performance, and products that you can setup and use with ease. That s why we extensively researched and tested this airplane, and suggested all the products necessary for you to setup properly. We understand that you have many choices when purchasing, and we are grateful you choose to buy from us. As vendors, one of the most gratifying things for us is to hear from our customers. We would welcome any suggestion to help us improve. Please make us aware of any errors and imperfections in the airplane or the instructions, or about the setup that we suggested. We hope you ll find our setup suggestions to be helpful, and enjoy flying your new airplane. Please feel free to contact us at (630) or us at support@valuehobby.com Disclaimer By purchasing and/or building this model, user assumes ALL liability and risk involved with this product. This model should be built and flown by an experienced pilot and only flown at AMA sanctioned sites. Value Hobby guarantees this model to be free of defects in materials and workmanship at the date of purchase. This warranty does not cover any parts damaged by use or modifications. In no way shall Value Hobby s liability exceed the original cost of the purchased model. Further, Value Hobby reserves the right to modify this warranty without notice. Value Hobby has no control over the final stages of assembly or the material used for the final assembly. No liability shall be assumed nor materials used for the final user assembled product. By the act of using the final product the user accepts all resulting liability. Value Hobby, as a R/C product vendor, provides a top-quality airplane and instructions to complete the model. The quality and flight characteristics of the finished model depend greatly on how it is built; we cannot guarantee the performance for the completed model and representations are expressed or implied as to the performance of the completed model. If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return this kit immediately, in new and unused condition. Safety in Assembly During assembly of this aircraft, you will be asked to use sharp knives and hobby adhesives. Please follow all safety procedures recommended by the manufacturers of the products you use, and always follow these important guidelines: ALWAYS protect your eyes when working with adhesives, knives, or tools, especially power tools. Safety glasses are the best way to protect your eyes. ALWAYS protect your body, especially your hands and fingers when using adhesives, knives, or tools, especially power tools. Do not cut toward exposed skin with hobby knives. Do not place hobby knives on tables or benches where they can roll off or be knocked off. ALWAYS have a first aid kit handy when working with adhesives, knives, or tools, especially power tools. ALWAYS keep hobby equipment and supplies out of the reach of children. Safety in Flying This is NOT a toy! It is a very high performance RC airplane capable of high speeds and extreme maneuvers. It should only be operated by a competent pilot in a safe area with proper supervision. ONLY fly your aircraft in a safe, open area, away from spectators and vehicles and where it is legal to fly. NEVER fly over an unsafe area, such as a road or street. Never fly too close to yourself or spectators. Never run your motor inside a house or building with the propeller attached Remove the prop for safety. Required Items Foam Safe Glue Hot Melt Glue Hobby Knife Small Phillips Screwdriver Set Metric Allen Wrenches Scissors Small Pliers Wire Cutters

3 Before Starting Assembly Unpack your airplane and examine the components. Check for damage of any kind. If you see any damage, please contact Value Hobby immediately. Airframe Parts

4 RECOMMENDED EQUIPMENT Product SKU Quantity FrSky Taranis Q X7 Transmitter and Receiver Set FRY-RC Towerpro MG90s TWP-SV GForce E KV Brushless Motor VHB-MT GForce 30A Brushless ESC HWG-SC GForce Elite Series 1600mAh 3S LiPO FLM-LP Gemfan 10*4.5 Prop GFH-MP Foam Safe Glue VHB-AC Hot Melt Glue VHB-AC Hot Melt Glue Gun VHB-AC Y-Harness (150mm) VHB-AC

5 Section 1 Wing Assembly 1 x Left wing First, apply foam glue to join the parts of the wing. 1 x Right wing 1 x Central wing 2 x Leading edge flap (White EPP foam) 6 x Side force generators (SFG) 1 x Heat shrink tubing (150mm) 2 x Aileron control horn (White PVC plastic) 2 x Aileron arm 4 x Servo fixed plate (2mm) 4 x Screws of aileron arm (M2*6mm) 2 x Carbon fiber rod (1*6*1000mm) 8 x Z-bend 4 x Plastic ends for the leading edge flap 1 x Wing bolt (3mm) Wait for 4-5 minute. After that, join the left and right wing with the central wing and allow the glue to properly cure. Locate 2 carbon fiber rods (1*6*1000mm), left wing, middle wing and right wing. 1

6 Apply foam glue to the pre-cut slot on the leading edge of the upper and lower surface of the wing. Wait for 4-5 minute. Then slide the carbon fiber rod into the slot. If the glue is hot melt glue, you must slide the carbon fiber strengthening plate into the slot quickly. Leading edge flap Installation Locate 2 white flap foams, 2 white PVC control horns, 2 white PVC fixed arms. Apply foam glue to two side of the left and right leading edge flap. Apply foam glue to the two plastic ends. 2

7 Glue the end with control horn to the left side of right leading edge flap and to the right side of left leading edge flap. Apply foam glue to four pre-cut slots on the leading edge of the wing. Wait for 4-5 minute. Slide two leading edge flaps into the slot. Locate 4 wood swivel piece for the leading edge flap and 4 M2*6mm screws. Secure the wood piece to each end. Secure the wing bolt to the pre-cut slot on the trailing edge of the central wing using foam glue. Pay attention to wing bolt should be fixed on the lower surface of the wing. 3

8 Slide the servo into the servo mounting plate. Then put the servo into the slot and secure the servo. You will need four 9g servos. They are not included. Must be purchased separately. Use the blade to cut the slot of servo extension. The depth is about 5-6mm. Repeat the same steps for the other 3 servos. Apply foam glue to the pre-cut slot on the wing. Locate two 2*28mm aileron carbon fiber pushrods, two 2*31mm aileron carbon fiber pushrods, eight Z- bend, four heat-shrink tubing, four screws, two aileron arms. 4

9 Tighten servo arm to aileron arm using four 2*6mm screws. Slide aileron carbon fiber pushrod and Z-bend into the heat-shrink tubing. Heat the heatshrink tubing to tighten aileron carbon fiber pushrod and Z-bend together. Fix the aileron arm to the aileron servo. The ruler should perpendicular to the top of servo arm. Then use the blade to cut a slot of 45mm length on the aileron. Slide completed pushrod into the hole of control horn and servo arm. Place the wing and the aileron on a flat surface. Then apply the glue to the aileron carbon fiber pushrod and the Z-bend. Pay attention to the opposite direction of the right and left servo arm. After that, apply foam glue to the slot and slide the control horn into it. The flap pushrod installation is the same as the aileron pushrod installation. And the flap pushrod installation is without the arm. 5

10 Glue the six SFG to the wing. There are pre-printed lines at the 1/4 of the leading edge. Apply foam glue to there. Locate the aileron SFG, shown below. Locate the central SFG as shown below. Apply foam glue to the inside of the side force generator (SFG). Glue all the SFG into place. 6

11 Section 2 Fuselage Assembly Locate the left and right fuselage, four landing gear reinforced rods (1*10*206mm x 2, 1*10*305mm x 2), two landing gear cover and one motor mount. Apply foam glue to the pre-cut slot of the fuselage. Slide landing gear reinforced rod into the slot. Apply foam glue to the pre-cut slot at the bottom of the fuselage. Apply the glue to the inter-locking joining areas of the landing gear cover. Join the fuselage with the landing gear reinforced foam and allow the glue to properly bond. 7

12 Locate the motor mount. Apply foam glue to the inter-locking joining areas of the left fuselage upper part. Apply glue to the pre-cut slot of the right fuselage. After that, slide the right fuselage into the slot of the left fuselage upper part. Wait for at least 3-5 minute until the glue has cured. slide the motor mount into the slot. Apply the glue to the inter-locking joining areas of the left fuselage lower part. Apply foam glue to the inter-locking joining areas of the right fuselage. 8

13 Wing-Fuselage Support Frame Assembly Find the following parts for the wing-fuselage support frame. Assemble the center support bridge first using the three wood pieces as shown below. Be careful when applying not to leave glue on the metal nuts. The completed fuselage. Glue the center support bridge as well as leading and trailing support piece to the left and right side of the frame. 9

14 Draw line along the edge of the support frame with a pen to mark where to apply the glue. Then apply the glue to the marked area. You can also apply glue to the support frame. Test fit the assembled wing-fuselage support frame with the fuselage. Don't apply glue yet. Put the support frame on again. Wait for the glue to fully cure. 10

15 Battery plate installation Locate the wood parts for the battery plate as below. Use the blade to cut a hole on the fuselage. This hole will be used for threading the battery wire through the fuselage. Apply glue to the pre-cut slot at the bottom of the fuselage. Apply glue to the two support blocks respectively. Use the glue to secure the battery plate onto the strengthening block. Secure the support blocks to the fuselage. Note the large block is in the front and smaller block is in the rear. 11

16 Assembly of fuselage front cover and canopy Apply glue on the fuselage where the front cover meets the canopy. The triangle foam support piece needs to be positioned so it can secure both the front cover piece and the canopy piece. Apply glue to the top of the fuselage head. Apply glue to the two sides of the triangle foam. Apply glue to the support frame. Glue the foam triangle to the fuselage Glue the wood support frame on the top front of the fuselage. Locate your motor, ESC, and motor installation screws. The motor and ESC must be purchased separately. We recommend 2212/2830 or larger brushless motors. Small motors would not have enough clearance. Install your motor on the radial mount. 12

17 Secure the radial motor mount to the wood motor mount. Connect the motor to the ESC. Connect the power to check whether the rotation direction of the motor is correct. If it is reverse rotation, two power cables of the motor and the ESC should be swapped. Apply glue on the triangle foam support. The ESC power cable goes through the hole on the fuselage bottom you cut earlier. Apply glue along the edge of the fuselage and wood support frame. The power wire of your brushless motor might not be long enough to go through the fuselage cover. You can either leave the ESC under the fuselage cover after you glue on the cover or use an extension wire. Using an extension wire would allow you to more easily change your ESC. 13

18 Apply glue to the foam cover. Apply the glue to the foam canopy. Secure the fuselage foam cover. Secure the canopy to the fuselage. Now we secure the foam canopy to the fuselage. Apply glue to the left and right edge of the fuselage. 14

19 Tail installation Locate a horizontal tail, a vertical tail, two elevator SFG, two foam triangular rods, two elevator carbon fiber rods (1*6*200mm x 1, 1*6*230mm x 1). Apply the glue to the pre-cut slot of the elevator control horn. Apply the glue to the elevator carbon fiber rods. Slide the control horn into the slot. Secure the 1*6*230mm rod to the horizontal tail s slot. Secure the 1*6*200mm rod to the elevator s slot. Use the blade to cut a slot of control horn on the foam. The position of the slot is 1 3/4in from the rudder bottom and at the leading edge of the rudder. The slot is 40mm. Apply the glue to the slot of the SFG. Then secure them to the pre-cut slot of the horizontal tail. 15

20 The control horn should be on the left side of the rudder, as shown below. Secure the 2 3/4in long foam triangle stock to the base of the horizontal tail on the fuselage using the glue. Secure the 10in long foam triangle stock to the bottom of the fuselage using the glue. 16

21 Apply glue to the pre-cut slot of the horizontal tail front and back sides. Join the horizontal and vertical tail onto the fuselage. Then secure them with glue. Apply glue to the inter-locking joining area of the vertical tail. Apply glue to the foam triangular stock. Secure the fuselage cover plate onto the fuselage using glue. 17

22 Slide carbon fiber rod and Z-bend into the heatshrink tubing. Heat the heat-shrink tubing to tighten carbon fiber rod and Z-bend together. Then secure them with glue. Locate two carbon fiber rods (one 2mm*185mm and one 2mm*285mm), two servo mounting bracket, four Z-bend, four heat-shrink tubing, two long fiberglass servo arms and mounting screws. Secure the servo mounting bracket onto the fuselage using glue. Locate two 9g servos, arms, screws. (Not included) 18

23 Tighten the long fiberglass servo arms to the servo arms that came with your servo. Locate another z-bend. Connect this Z-bend to the rudder control horn. Then join this Z-bend and the 285mm pushrod using heat-shrink tubing. Secure the completed arm to the servo. The rudder and the vertical tail should be aligned. Secure the rudder servo into the servo opening on the fuselage left side. Join the 285mm pushrod with the servo arm. Secure the elevator servo to the servo opening on right side of the fuselage. 19

24 Connect the elevator servo to the 185mm pushrod, and then to the elevator control horn. The process is the same as on the rudder. The elevator and the horizontal tail should be properly aligned. Align the hole of the wood wheel core to the hole of the white EPP foam wheel. Then secure them together using glue. Apply the glue to the black foam wheel and the other side of the white wheel. Locate the four black EPP foam wheels, two white EPP foam wheels, wooden accessory sheet, a string, and two wheel bolts (M2*60mm). Slide the black wheel into the wooden wheel. And wait for the glue cure. Use another wood wheel core and black wheel on the other side of the wheel as shown below. Peel one wood wheel core from the accessory sheet. Apply the glue to the wood wheel core. Locate the landing gear support pieces. 20

25 Glue them together. Install the wheel support pieces between the landing gear carbon fiber rods. Use glue to secure them. Locate the 60mm carbon fiber rods. Locate the wheel axle holders. Insert the carbon fiber rod into the landing gear support piece. You should leave out about 1 1/2in of the rod for wheel installation. Glue them together. Secure the wheel bolt with the string. Insert the string into the opening, then wrap the string around the rod and the wood support. 21

26 After the rod has been securely fastened to the wood support, use some CA to secure the string. Locate the wheel block. Install the wheel block. Secure it with the glue. Secure the wheel axel holder at the end of the landing gear support piece. The holder should be angled so that the wheel block and foam wheel are in the right direction after installation. Install the foam wheel. Secure it with the wood nut. 22

27 Apply the hot melt glue to secure the wheel nut Glue the other end of the support rod on the vertical tail. Repeat the same steps for both wheels. Locate the two vertical tail support rods (2mm*165mm). The CG should be 83mm (3.26in) from leading edge of the wing. Control Throws Extreme & 3D Install the support rod on the horizontal tail so that it meets the end of the carbon fiber rod buried inside. Secure the support rod with glue. Ailerons: approx. +/-40 degree Rudder: approx. +/- 40 degree Elevator: approx. +/-40 degree Beginner & Sport Aileron: approx. +/- 20 degree Rudder: approx. +/- 20 degree Elevator: approx. +/- 20degree 23

28in Super EVA Foam. F-22 Raptor Kit. Specifications. Wingspan: 27.5in (700mm) Length: 38.3in (975mm) Flying Weight: Approx. 1.

28in Super EVA Foam. F-22 Raptor Kit. Specifications. Wingspan: 27.5in (700mm) Length: 38.3in (975mm) Flying Weight: Approx. 1. 28in Super EVA Foam F-22 Raptor Kit Specifications Wingspan: 27.5in (700mm) Length: 38.3in (975mm) Flying Weight: Approx. 1.2lbs (530g) Dear Customer, Congratulations on your purchase of 28in F22 Raptor

More information

25mm EPP SU31. Instruction Manual. Specifications

25mm EPP SU31. Instruction Manual. Specifications 25mm EPP SU31 Instruction Manual Specifications Wingspan: 39.4in (1000mm) Length: 42in (1070mm) Wing Area: 448sq in (28.9sq dm) Flying Weight: Approx. 1.5lb (650-710g) Dear Customer, www.valuehobby.com/su31-epp.html

More information

Aviator Trainer40 ARF Instruction Manual Specifications

Aviator Trainer40 ARF Instruction Manual Specifications Aviator Trainer40 ARF Instruction Manual Specifications Wingspan: 65.0 in (1650 mm) Length: 53.1 in (1350 mm) Wing Area: 729sq in (47.0 sq dm) Flying Weight: 5.3 lbs (2400g) Dear Customer, Congratulations

More information

TWEETY Instruction Manual. Almost-Ready-to-Fly Nitro/Electric Aerobatic Airplane SPECIFICATIONS FEATURES

TWEETY Instruction Manual. Almost-Ready-to-Fly Nitro/Electric Aerobatic Airplane SPECIFICATIONS FEATURES TWEETY - 40 Almost-Ready-to-Fly Nitro/Electric Aerobatic Airplane Instruction Manual SPECIFICATIONS WINGSPAN: 60.1in (1526mm) LENGTH: 46.5in (1180mm) WING AREA: 654 sq in (42.2 sq dm) FLYING WEIGHT: 5.5

More information

INS TRUC T I ON M A NU A L

INS TRUC T I ON M A NU A L INS TRUC T I ON M A NU A L Packing list: 1: PP F6F fuselage *1 2: Carbon tube 5*5*940mm *1 3: Pull rod *4 4: Motor mount *1 5: Quick rod adjuster *4 6: Hinge *4 7: M3 screws *4 8: Hook and loop tape *1

More information

Assembly Manual / Airframe 65 Vyper SAFETY in Assembly SAFETY in Flying

Assembly Manual / Airframe 65 Vyper SAFETY in Assembly SAFETY in Flying 1 Assembly Manual / Airframe 65 Vyper Thank you for purchasing this 3DHobbyShop ARF RC aircraft. If you have any issues, questions, concerns or problems during assembly, please contact our tech department

More information

Super Sky Surfer 2000 Assembly Instructions

Super Sky Surfer 2000 Assembly Instructions Super Sky Surfer 2000 Assembly Instructions Note: Plug and Play version of the Sky Surfer comes with fuselage pre-glued and motor/servos installed. If you wish to route antennas or wires through the tail,

More information

(Build Instructions)

(Build Instructions) (Build Instructions) Specifications * Wingspan: 58cm * Length: 50cm * Flying Weight: 59 grams * Channels: 3 (Rudder Elevator Throttle) * Suggested Receiver: 4Ch Micro * Motor: 8mm GearDrive * Prop: GWS

More information

INCLUDED IN THIS KIT: SPECIFICATION: NEEDED BUILDING TOOLS: REQUIRED EQUIPMENT:

INCLUDED IN THIS KIT: SPECIFICATION: NEEDED BUILDING TOOLS: REQUIRED EQUIPMENT: Please review this entire manual before beginning assembly. By doing so it will help you better understand each step as you progress in the actual building of your kit, and you will do a better job in

More information

E-AERO EPP PITTS KIT From BP HOBBIES. Parts Included in kit

E-AERO EPP PITTS KIT From BP HOBBIES. Parts Included in kit E-AERO EPP PITTS KIT From BP HOBBIES Parts Included in kit Thank you for purchasing the BP Hobbies/E-aero EPP Pitts. Please take the time to read through the instruction manual before beginning the build.

More information

uin RC FPRC ZERO Specificationss Empty Weight

uin RC FPRC ZERO Specificationss Empty Weight Flying Pengu uin RC FPRC ZERO Specificationss Wing Span 42.75 (1085 mm) Fuselage length 30.5 ( 775 mm) Empty Weight 9.5 10 oz. (150 160g) Estimated Flying Weight 20 255 oz. (320 400g) Wing Area: 151 sq.

More information

High performance 90mm fiberglass jet

High performance 90mm fiberglass jet High performance 90mm fiberglass jet Assembly manual For intermediate and advanced fliers only! Specs Wingspan: 1255mm Fuselage length: 1250mm Flying weight: 2600-3000g Wing area: 22.6 dm² Wing loading:

More information

SebArt professional line

SebArt professional line SebArt professional line Wind S 110 ARF ASSEMBLY MANUAL The new Wind S 110 ARF was designed by Italy aerobatic pilot, Sebastiano Silvestri. This professional ARTF kit is the result of Sebastiano s 20 years

More information

EPP Rebel Z 35. White Red w/ Blue Orange w/ Blue Orange w/burgundy Other. Specs. Color - Bottom White Black Checkers Silver Checkers Other Checkers

EPP Rebel Z 35. White Red w/ Blue Orange w/ Blue Orange w/burgundy Other. Specs. Color - Bottom White Black Checkers Silver Checkers Other Checkers EPP Rebel Z 35 Specs AUW ~10.0oz Width 35.28 Length 34.67 Wing Area 1.44 sqft Horz Area 2.35 sqft Vert Area.91 sqft

More information

Sbach 1,2m 3D/aerobatic EPP model Building instructions

Sbach 1,2m 3D/aerobatic EPP model Building instructions Sbach 1,2m 3D/aerobatic EPP model Building instructions Please refer to the Diagram sheet Diagrams A, B Press 2 carbon strips (1x3x1000 mm) into the grooves in the sides of the fuselage central part (the

More information

Taylorcraft Indoor / Cul-De-Sac Flyer

Taylorcraft Indoor / Cul-De-Sac Flyer Taylorcraft Indoor / Cul-De-Sac Flyer Taylocraft Specifications Wingspan: 28.0 in. Wing Area: 117 sq. in. Weight (Ready to Fly): 3.0 3.1 oz. Wing Loading: 3.7 3.8 oz. / sq. ft. LIABILITY RELEASE In that

More information

TWEETY 25 INSTRUCTION MANUAL. Almost Ready to Fly Nitro/Electric Aerobat FEATURES SPECIFICATIONS

TWEETY 25 INSTRUCTION MANUAL. Almost Ready to Fly Nitro/Electric Aerobat FEATURES SPECIFICATIONS TWEETY 25 Almost Ready to Fly Nitro/Electric Aerobat INSTRUCTION MANUAL SPECIFICATIONS FEATURES WINGSPAN: 45.7 (1160mm) LENGTH: 38.6 (980mm) WING AREA: 370 sq in(24 sq dm) FLYING WEIGHT: Approx. 3.3 lbs

More information

Ryan STA Sport Scale Model Aircraft Assembly and Instruction Manual

Ryan STA Sport Scale Model Aircraft Assembly and Instruction Manual Ryan STA Sport Scale Model Aircraft Assembly and Instruction Manual Warning: This radio controlled model is not a toy. It requires skill to fly and is not recommended for the novice pilot. It should not

More information

3DHobbyShop.com Edge Assembly Manual

3DHobbyShop.com Edge Assembly Manual 3DHobbyShop.com Edge 540 92 Assembly Manual Thank you for purchasing this 3DHobbyShop ARF RC aircraft. If you have any issues, questions, concerns or problems during assembly, please contact our tech department

More information

Sirius instruction manual

Sirius instruction manual Sirius instruction manual Thank you for purchasing the eagle wing plane.the sirius is designed for First-Person-Vision (FPV) application spec ifically. Due to the high wingand push prop design, the on-board

More information

56 & 60 AJ Laser 230z Assembly Instructions

56 & 60 AJ Laser 230z Assembly Instructions 56 & 60 AJ Laser 230z Assembly Instructions Congratulations Whether you're looking to go out and go 3d huckin' or lay down a smooth-as-butter precision flight, the 56 or 60 Laser 230z is for you! The wings

More information

CARL GOLDBERG PRODUCTS, LTD.

CARL GOLDBERG PRODUCTS, LTD. Eagle 400 WARNING A radio-controlled model is not a toy and is not intended for persons under 16 years old. Keep this kit out of the reach of younger children, as it contains parts that could be dangerous.

More information

Instruction Manual book

Instruction Manual book Instruction Manual book ITEM CODE BH53. SPECIFICATION Wingspan : 1,250mm 49.21 in. Length : 930mm 36.61in. Weight : 1.1kg 2.42 Lbs. Parts listing required (not included). Battery: 3 CELLS-LI-POLY-11.1V-2,500

More information

ULS Cherokee. Ultra Low Speed aircraft for indoor RC flying. Zippkits. Specifications: Required to complete:

ULS Cherokee. Ultra Low Speed aircraft for indoor RC flying. Zippkits. Specifications: Required to complete: Zippkits ULS Cherokee Ultra Low Speed aircraft for indoor RC flying. Specifications: Span- 28 inches Wing Area- 151 Sq/In Wing Loading- 3.0 ounces/ft Weight- 3.5 ounces RTF Build time- 1-2 Hours Radio-

More information

30% Edge 540T Almost Ready to Fly

30% Edge 540T Almost Ready to Fly Lanier R/C 30% Edge 540T Almost Ready to Fly WARNING! THIS IS NOT A TOY! THIS IS NOT A BEGINNERS AIRPLANE This R/C kit and the model you will build from it is not a toy! It is capable of serious bodily

More information

Citabria Pro. Aerobatic Parkflyer. by Joel Dirnberger

Citabria Pro. Aerobatic Parkflyer. by Joel Dirnberger Citabria Pro Aerobatic Parkflyer by Joel Dirnberger Revision C: December 21, 2004 Citabria Pro Building Instructions Length: Wingspan: Wing Area: Flying Weight: Wing Loading: Functions: Specifications:

More information

Extra 330LT CC. 2 Colour schemes H-G120001A ORACOVER FERRARI RED # ORACOVER WITH # ORACOVER BLACK # ORACOVER SILVER #

Extra 330LT CC. 2 Colour schemes H-G120001A ORACOVER FERRARI RED # ORACOVER WITH # ORACOVER BLACK # ORACOVER SILVER # Extra 330LT 85-125CC Item No:A-G120001 Specs: WING SPAN: LENGTH: WING AREA: FLYING WEIGHT: ENGINE: RADIO: Description Covering Material Carbon Fibre: 111 (2833mm) 100" (2530mm) 2139sq in (138sq dm) 25.3-28lbs

More information

Corvus Racer CC

Corvus Racer CC Corvus Racer 540 35CC Item No:L-G035008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio mm mm 1200sq in (77.4sqdm) 9.9-12lbs(4.5-5.5kg) 91-1.20(2C) 1.10-1.40(4C) 20-40cc

More information

F-16 Falcon 70mm EDF

F-16 Falcon 70mm EDF F-16 Falcon 70mm EDF Instruction manual Specifications: Winspan: 640 mm Length: 990 mm Weight: 900-1100 gram Ducted fans 70mm x 1 Required tools and components:. 4 ch. Computer Radio system w/ 2 servos.

More information

10 th Anniversary 51 AJ Slick 540 Assembly Instructions

10 th Anniversary 51 AJ Slick 540 Assembly Instructions 10 th Anniversary 51 AJ Slick 540 Assembly Instructions Up Your Game! Fly AJ Aircraft From all of us at AJ Aircraft, we thank you for your business. Our custom designs, combined with top grade materials,

More information

62 AJ Acuity Assembly Instructions

62 AJ Acuity Assembly Instructions 62 AJ Acuity Assembly Instructions Congratulations The all-new AJ Aircraft Acuity was designed to give you all of the precision flight abilities of expensive composite aircraft, in a more traditional balsa

More information

White Red w/ Blue Orange w/ Blue Burgundy w/ Orange Other

White Red w/ Blue Orange w/ Blue Burgundy w/ Orange Other Specs AUW ~6.5oz Width 32.875 Length 29.50 Wing Area 1.35 sqft Horz Area 2.22 sqft Vert Area 1.26 sqft Suggested Hardware ~25g 90 watt Motor 12 amp ESC Servos 6g+ (4) 2s LiPo (300-500mAh) 4ch Radio/Rx

More information

84 Turbo Bushmaster. Copyright 2016 Extreme Flight

84 Turbo Bushmaster. Copyright 2016 Extreme Flight 84 Turbo Bushmaster Copyright 2016 Extreme Flight 1 Please take a few moments to read this instruction manual before beginning assembly. We have outlined a fast, clear and easy method to assemble this

More information

105" TIGER MOTH ARF INSTRUCTION MANUAL VERSION 1.0

105 TIGER MOTH ARF INSTRUCTION MANUAL VERSION 1.0 105" TIGER MOTH ARF INSTRUCTION MANUAL VERSION 1.0 Step 1. Installation of the aileron servos 1) Mount aileron servo to servo mounting blocks with servo s screws. Install servo mounting plate with screws.

More information

Instruction Manual book

Instruction Manual book Instruction Manual book ITEM CODE: BH50. SPECIFICATION Wingspan : 1,600 mm 62.99 in. Length : 1,230 mm 48.43 in. Weight : 2.5 kg 5.5 Lbs. Radio : 06 channels. Servo : 07 servos. Electric Motor : ( 02pcs

More information

VT-ALLROUNDER V4 1500MM CORO 3/4 Channel Trainer Airplane

VT-ALLROUNDER V4 1500MM CORO 3/4 Channel Trainer Airplane Congratulations on your purchase of the VT- AllRounder 1500MM Trainer Airplane Kit.. Hope these build instructions help you complete the build. Though the build itself doesn't take much time, just be sure

More information

C-180 Builder s Manual

C-180 Builder s Manual C-180 Builder s Manual. May 20, 2002 Last revised July 11, 2002 Copyright! 2002 Douglas Binder, Mountain Models www.mountainmodels.com sales@mountainmodels.com (719) 630-3186 1 Required Equipment! Xacto

More information

35 Magnum. Instruction Manual

35 Magnum. Instruction Manual EPP EPP 35 35 Magnum Rebel Z Instruction Manual This is how your kit will arrive When cutting the hardware package open use caution. The contents are semi-coiled to fit in the box. They will spring open

More information

Assembly Manual / Airframe 70 Velox

Assembly Manual / Airframe 70 Velox Assembly Manual / Airframe 70 Velox Thank you for purchasing this 3DHobbyShop ARF RC aircraft. If you have any issues, questions, concerns or problems during assembly, please contact our tech department

More information

HIGH-END TECHNOLOGY. Electric ducted fan Starfighter

HIGH-END TECHNOLOGY. Electric ducted fan Starfighter HIGH-END TECHNOLOGY RC Electric ducted fan Starfighter First we want to thank and congratulate you with your decision in buying one of our Kits. The Starfighter puts together very easily so there is not

More information

T-15 EDF INSTRUCTION MANUAL. Wingspan.31in. Weight..2.5 lb. EDF...70mm 12 Blade ToughJets, LLC Kittery, ME Page 1 of 22.

T-15 EDF INSTRUCTION MANUAL. Wingspan.31in. Weight..2.5 lb. EDF...70mm 12 Blade ToughJets, LLC Kittery, ME Page 1 of 22. TM T-15 EDF INSTRUCTION MANUAL Specifications Wingspan.31in Length..41.75in Wing Area 515 sq in EDF...70mm 12 Blade Weight..2.5 lb Radio...3 channel Motor...Brushless Battery 14.8v 2200mah 40c 2013 ToughJets,

More information

Cheeper Assembly instruction

Cheeper Assembly instruction 1. Equipment, materials and tools for assembly.......2 2. Assembly.....3 3. Setting of the model.....11 1. Equipment, materials and tools for assembly 1 Wing; 2 Fuselage; 3 Stabilizer; 4 Fin; 5 Dowel for

More information

FOKKER D.VII 1:7.4. No.EP-46K. MTH HOBBY PRODUCTS INDUSTRIAL CO., LTD. MTH HOBBY 2015

FOKKER D.VII 1:7.4. No.EP-46K. MTH HOBBY PRODUCTS INDUSTRIAL CO., LTD.  MTH HOBBY 2015 No.EP-46K FOKKER D.VII 1:7.4 MTH HOBBY PRODUCTS INDUSTRIAL CO., LTD. www.mth.com.tw mthhobby@mth.com.tw MTH HOBBY 2015 SPECIFICATION: Wing span: 1200mm Wing area: 41 dm Length: 990mm Weight: 1400g, including

More information

Assembly Instructions

Assembly Instructions Congratulations AJ Aircra thanks you for the purchase of this airplane. Top grade materials and precision assembly has gone into this to make this a top quality aircra. Following the direcons closely,

More information

VIPER 140 Manual. Release 1.0 January 2018

VIPER 140 Manual. Release 1.0 January 2018 VIPER 140 Manual Release 1.0 January 2018 Please read this user manual carefully, it contains instructions for the correct assembly of the model. Please refer to the web site www.harlock-rc.com for updates

More information

Required Tools: Hobby Knife (# M917) Philips #1 Screwdriver Sanding Block (150grit) Pliers/Wire Cutters

Required Tools: Hobby Knife (# M917) Philips #1 Screwdriver Sanding Block (150grit) Pliers/Wire Cutters Thanks for choosing the Combat Wings - XE2 as your next or first model airplane. The XE2 s wings are made from 100% EPP (expanded polypropylene) foam which is extremely durable. For this reason, the XE2

More information

F3A -70E ASSEMBLY MANUAL

F3A -70E ASSEMBLY MANUAL F3A -70E ASSEMBLY MANUAL The new F3A-70E, was designed in an extremely lightweight structure, the all wood airframe, and the new revolutionary Lift Generator on landing gear give the F3A-70E an impressive

More information

EPP EAGLE THE RC RAPTOR

EPP EAGLE THE RC RAPTOR EPP EAGLE THE RC RAPTOR Installation Manual FLYEAGLE2007@GMAIL.COM TM Step 1: Verify that all the EPP Eagle pieces are included in the Kit. Before we start. Step 2: Identify the pieces need to assemble

More information

Hot Stik ARF WARNING. Copyright 2005 Carl Goldberg Products LTD CARL GOLDBERG PRODUCTS, LTD.

Hot Stik ARF WARNING. Copyright 2005 Carl Goldberg Products LTD CARL GOLDBERG PRODUCTS, LTD. Hot Stik ARF INSTRUCTIONS WARNING A radio-controlled model is not a toy and is not intended for persons under 16 years old. Keep this kit out of the reach of younger children, as it contains parts that

More information

Instruction Manual. Item No: AL001

Instruction Manual. Item No: AL001 Instruction Manual Item No: AL001 Specifications: Wingspan: 2037mm (80.2 in) Length: 1677mm (66 in) Wing Area: 65.5dm2 (1015.3 sq in) Flying Weight: 7.6kg (16.7 lbs) Engine(not incl.): 45-50cc Gas Radio(not

More information

Zlín Z-37A Čmelák ("Bumblebee ) 850 mm. Assembly Instructions and recommended equipment of the RC model

Zlín Z-37A Čmelák (Bumblebee ) 850 mm. Assembly Instructions and recommended equipment of the RC model Zlín Z-37A Čmelák ("Bumblebee ) 850 mm Assembly Instructions and recommended equipment of the RC model 1 Technical information: Wingspan: Overall Length: Flying weight: RC Functions: 850 mm 610 mm ~380

More information

INSTRUCTION MANUAL WARRANTY

INSTRUCTION MANUAL WARRANTY INSTRUCTION MANUAL WARRANTY Great Planes Model Manufacturing Co. guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component

More information

LANDING GEAR. 1. Fit landing gear into slots on bottom of fuselage.

LANDING GEAR. 1. Fit landing gear into slots on bottom of fuselage. LANDING GEAR 1. Fit landing gear into slots on bottom of fuselage. 4. Use channel-lock pliers to press blind nuts into position (note: drilled hole should be slightly smaller than shaft of blind nut for

More information

INCLUDED IN THIS KIT: SPECIFICATION: NEEDED BUILDING TOOLS: REQUIRED EQUIPMENT:

INCLUDED IN THIS KIT: SPECIFICATION: NEEDED BUILDING TOOLS: REQUIRED EQUIPMENT: Please review this entire manual before beginning assembly. By doing so it will help you better understand each step as you progress in the actual building of your kit, and you will do a better job in

More information

SNIPE 2 Recommendations for assembly

SNIPE 2 Recommendations for assembly Accessory kit: 1. The list of parts and materials to build: Parts set: 1 - Launching peg; 2 - Aileron clevises (with M2.5 thread); 3 - Stabilizer control horn; 4 - Rudder control horn; 5 - Set of screws

More information

RYAN STA SAFETY PRECAUTIONS. "Sport Scale E-Power ARF" For Intermediate and Advanced Fliers. This radio control model is not a toy!

RYAN STA SAFETY PRECAUTIONS. Sport Scale E-Power ARF For Intermediate and Advanced Fliers. This radio control model is not a toy! RYAN STA "Sport Scale E-Power ARF" For Intermediate and Advanced Fliers. SAFETY PRECAUTIONS This radio control model is not a toy! First-time builders should seek advice from people with model building

More information

Print template tiles and put together with clear tape to complete template.

Print template tiles and put together with clear tape to complete template. Print template tiles and put together with clear tape to complete template. Cut each pattern out with scissors or use a razor and strait edge ruler. Use the ruler as a guide for the razor to get nice strait

More information

Your kit contains the following parts. Please check your kit for any missing or damaged parts before starting construction.

Your kit contains the following parts. Please check your kit for any missing or damaged parts before starting construction. Your kit contains the following parts Please check your kit for any missing or damaged parts before starting construction COMPLETE KIT PARTS LIST 1 Plan Sheet #1 1 Plan Sheet #2 2 Decal Sheet 2 White Tissue

More information

BOOMERANG TORUS. Aerobatic Sport Jet for 20 to 34 lbs (P80 to P160) thrust turbines.

BOOMERANG TORUS. Aerobatic Sport Jet for 20 to 34 lbs (P80 to P160) thrust turbines. BOOMERANG TORUS Aerobatic Sport Jet for 20 to 3 lbs (P80 to P160) thrust turbines. Specifications: Span... 83" (2209mm.) Span with Wingtip Tanks 90" (2286mm.) Length...87" (2108mm.) Weight 29 Lbs.(13.15

More information

INSTRUCTION MANUAL BOOK.

INSTRUCTION MANUAL BOOK. INSTRUCTION MANUAL BOOK. SPECIFICATION Wingspan : 164 cm 64.57in. Length : 135 cm 53.15 in. Weight : 3.3kg 7.26 lbs. Servo : 7 servos. Radio : 4 channels. Engine : 61 cu.in-2 stroke. 91 cu.in-4 stroke.

More information

Stream NXT - assembly instructions

Stream NXT - assembly instructions Stream NXT - assembly instructions Recommended settings CG (measured from root leading edge): Speed/launch camber (+down, near the wing root): Cruise camber (+down, near the wing root): Thermal camber

More information

Corvus Racer Colour schemes. AeroPlus RC Copyright 2013 All Rights Reserved

Corvus Racer Colour schemes. AeroPlus RC Copyright 2013 All Rights Reserved Corvus Racer 540 59 Item No:A E050003 Specifications WING SPAN: 59"(1500mm) LENGTH: 54.1"(1374mm) WING AREA: 654sq.in.(42.2sq.dm.) FLYING WEIGHT: 4.6 5.3lbs(2000 2300g) Electric:Brushless outrunner 8Oz.

More information

CARL GOLDBERG PRODUCTS, LTD.

CARL GOLDBERG PRODUCTS, LTD. Chipmunk 400 WARNING A radio-controlled model is not a toy and is not intended for persons under 16 years old. Keep this kit out of the reach of younger children, as it contains parts that could be dangerous.

More information

Thank you for your purchase of the Lee Ulinger, FoamtanaS, Yak-55, or Extra 330 3D Depron foam, Aerobatic airplane.

Thank you for your purchase of the Lee Ulinger, FoamtanaS, Yak-55, or Extra 330 3D Depron foam, Aerobatic airplane. Thank you for your purchase of the Lee Ulinger, FoamtanaS, Yak-55, or Extra 330 3D Depron foam, Aerobatic airplane. Tools you will need to build Recommended additional items: #11 hobby knife Motor: Hacker

More information

Eva. Extremely Versatile Airframe

Eva. Extremely Versatile Airframe Eva Extremely Versatile Airframe Eva Specifications Length: 32 Weight (without battery): ~12oz. Revision History Date Revision Notes/Comments 6/3/05 Document initial creation. Thank you for purchasing

More information

Edge 540 V3 35CC. Scheme A. Item No:L G Specifications. Flying Weight

Edge 540 V3 35CC.  Scheme A. Item No:L G Specifications. Flying Weight Edge 540 V3 35CC Item No:L G035016 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description 76 (1930mm) 74 (1879mm) 1200sq in(77.4sqdm) 9.9 12lbs(4.5 5.5kg) 91 1.20(2C)

More information

34" PELICAN by CRASH TEST HOBBY

34 PELICAN by CRASH TEST HOBBY 34" PELICAN by CRASH TEST HOBBY The Pelican is a 34" trainer that can level its own wings and put its nose on the horizon once trimmed and balanced. It can handle more wind than most EZ flying planes in

More information

Millennium RC presents The New and Improved (now even easier to build and cover!) SSX X-Trainer Build Kit

Millennium RC presents The New and Improved (now even easier to build and cover!) SSX X-Trainer Build Kit Millennium RC presents The New and Improved (now even easier to build and cover!) SSX X-Trainer Build Kit Wing span: Approx. 42 Wing Area: 504 sq. in. Wing Loading: 6.71 oz/ sq. ft. Introduction: The Slow

More information

Ÿ Battery Strap Ÿ Paper Knife Ÿ Elevon Throw Gauge Ÿ Instructional Manual. Building Tools:

Ÿ Battery Strap Ÿ Paper Knife Ÿ Elevon Throw Gauge Ÿ Instructional Manual. Building Tools: Congratulations on your purchase of the TuffBirds Spec Racer Flying Wing. We Hope these build instructions will help you complete the build easily. Though the build itself doesn't take much time, just

More information

NASTY Build Guide. Supplies needed

NASTY Build Guide. Supplies needed NASTY Build Guide Supplies needed Blucore or Depron Foam. Blucore (Fan Fold Foam) is available at Lowes. Approximately $25 for 50 feet of Blucore. Depron can be ordered on the internet for slightly more.

More information

1/6 PA-25 PAWNEE. *Specifications are subject to change without notice.*

1/6 PA-25 PAWNEE. *Specifications are subject to change without notice.* 1/6 PA-25 PAWNEE INSTRUCTION MANUAL [ A335 Kit ] Wing Span : 72 in / 1830 mm Wing Area : 736 sq in / 47.5 sq dm Flying Weight : 6.6 lbs / 3000 g Fuselage Length : 48 in / 1220 mm Requires : "Glow Power"

More information

ZupAir ZULU OWNER S MANUAL

ZupAir ZULU OWNER S MANUAL ZupAir ZULU OWNER S MANUAL 1 Introduction Thank you for purchasing the ZupAir Zulu. This glider has excellent performance, a terrific speed-range, responsive handling and great aerobatic capability. A

More information

EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description

EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description EXTRA 330SC 60CC Item No:H G060011 Specifications Wing Span Length Wing Area Flying Weight Gasoline Radio Description Carbon Fibre : 92" (2347mm) 84 1/2 " (2060mm) 1526.8 sq in(98.5sq dm) 16 17lbs(7300

More information

Instruction Manual. Specification:

Instruction Manual. Specification: Instruction Manual H I G Specification: Wingspan: 133 cm (52.3 inches) Length : 104 cm (40.9 inches) Weight : 1830gr Engine : 25-32 two stroke Radio : 4 channel - 4 servo H W I N G KIT CONTENTS: We have

More information

Velocity Slingjet. Specifications: Construction Span Length Take-off weight w/ gear. Balsa/foam/film 1055m m (41.54 ) 1040m m (40.

Velocity Slingjet. Specifications: Construction Span Length Take-off weight w/ gear. Balsa/foam/film 1055m m (41.54 ) 1040m m (40. Velocity Slingjet Specifications: Construction Span Length Take-off weight w/ gear Recommended servos w/o nose-steering Recommended fan Recommended motor Recommended controller Balsa/foam/film 1055m m

More information

Instructions - Stobel V2

Instructions - Stobel V2 Instructions - Stobel V2 Congratulations on the purchase of your Stobel, a high end DLG-competition model from LE-composites. We hope you will be happy and successful. To ensure the optimum build we ask

More information

S.E.5a (Build Instructions)

S.E.5a (Build Instructions) S.E.5a (Build Instructions) Specifications Wingspan: 38 cm Length: 31cm Flying Weight: 41 Channels: 3 (Rudder Elevator Throttle) Suggested Receiver: 3Ch Brick Motor: 7mm Geared Motor Airframe Only Kit

More information

This pictorial document contains assembly recommendations including some fit and finish details that will be helpful when building this airplane

This pictorial document contains assembly recommendations including some fit and finish details that will be helpful when building this airplane This pictorial document contains assembly recommendations including some fit and finish details that will be helpful when building this airplane Problems found with this kit and a flight performance review

More information

Revolution 3D-mini ARF

Revolution 3D-mini ARF Revolution 3D-mini ARF 1 Included Hardware 4 Dubro Micro Control Horns #DUB848 2.32 x 18" Linkage Wire (Music Wire) 1 1.5 x 1.25 x 1/8 Balsa Ply (for motor mount) 1 5" piece of Velcro (Optional recommended,

More information

32 Crack Yak-55. Twisted Hobbys Specifications. Rev: v004a 1

32 Crack Yak-55. Twisted Hobbys  Specifications. Rev: v004a 1 32 Crack Yak-55 By RC Factory Specifications Wing span 32 / Length 31 AUW 160-175g (with Landing Gear) 50-70w outrunner motor (19g 24g) 6-12 amp ESC / 2s 360 450mAh battery 4 ch radio / 2x 4g servos /

More information

ALBATROSS by CRASHTESTHOBBY.COM

ALBATROSS by CRASHTESTHOBBY.COM ALBATROSS by CRASHTESTHOBBY.COM The Albatross is a unique slow flyer designed to put its nose on the horizon and level its own wings without a pilot. It is very quiet and designed to use inexpensive electronics.

More information

Designed in 2005 by Bernard Burton. Assembly manual Bernard Burton DRAFT 1

Designed in 2005 by Bernard Burton. Assembly manual Bernard Burton DRAFT 1 Designed in 2005 by Bernard Burton Assembly manual 2005 - Bernard Burton DRAFT 1 The plans can be requested via this link http://www.gundersonaerodesign.com/m12plansreq.htm The laser kit is available here

More information

ParkJet Builder s Manual

ParkJet Builder s Manual ParkJet Builder s Manual Thank you for purchasing the ParkJet. The ParkJet is a profile ducted fan airplane that can be flown in a larger park. The ParkJet was initially designed by Scott Stoops and modified

More information

PROCTOR. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH154. SPECIFICATION ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER

PROCTOR. Instruction Manual Book 95% ALMOST READY TO FLY. Item code: BH154. SPECIFICATION ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER Instruction Manual Book PROCTOR Item code: BH154. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER 95% ALMOST READY TO FLY SPECIFICATION Wingspan: 1,360 mm (53.54 in). Length: 1,480 mm(58.27 in).

More information

L 410 UVP-E Turbolet. Recommended equipment and guide for the building of RC model aircraft.

L 410 UVP-E Turbolet. Recommended equipment and guide for the building of RC model aircraft. L 410 UVP-E Turbolet Recommended equipment and guide for the building of RC model aircraft. - 1 - History of L-410 It has been 45 years since the first small commercial L-410 prototype took off. The first

More information

Assembly Instructions. Stinger 120. Almost Ready to Fly

Assembly Instructions. Stinger 120. Almost Ready to Fly Stinger 120 Almost Ready to Fly Important Information: Please inspect the plane before beginning to assemble to make sure you are happy with it. After assembly has begun you cannot return the kit. If you

More information

FUSELAGE CONSTRUCTION

FUSELAGE CONSTRUCTION FUSELAGE CONSTRUCTION Note: prior to building and gluing on the work surface use protective covering on your building surface. (wax paper or clear wrap) Fit the laser cut Fuselage Front and Fuselage Rear

More information

30 Crack Wing. Twisted Hobbys Specifications. RC Factory. Rev: v001b 1

30 Crack Wing. Twisted Hobbys  Specifications. RC Factory. Rev: v001b 1 30 Crack Wing RC Factory By RC Specifications Wing span 30 / Length 14 AUW 90-100g 2000-2800kV outrunner motor (11g 18g) 6-12 amp ESC / 2s 180 250mAh battery 4 ch radio with Elevon Mixing 2x 4g to7g servos

More information

JTM 90mm EDF Viper Jet Installation Manual

JTM 90mm EDF Viper Jet Installation Manual JTM 90mm EDF Viper Jet Installation Manual Provided by ERJets www.erjets.com 1 Disclaimer: Welcome onboard! This radio controlled jet is not a toy. It has the capability of flying in high speed and therefore

More information

HIGH-END TECHNOLOGY. Electric ducted fan rafale

HIGH-END TECHNOLOGY. Electric ducted fan rafale HIGH-END TECHNOLOGY RC Electric ducted fan rafale First we want to thank and congratulate you with your decision in buying one of our Kits. The Rafale puts together very easily so there is not much explanation

More information

GYM-E. Instruction Manual - Version 1.03

GYM-E. Instruction Manual - Version 1.03 GYM-E Original Design by Todd Long Instruction Manual - Version 1.03 Span 31 in. / Length 27 in. / Area 265 Sq. In. / Weight 4.5-6.5 oz. Gym-E kit reproduced with permission by Stevens AeroModel 2008 Stevens

More information

I hope you enjoy the Spirit as much as I have. Scott DeTray Model Aero

I hope you enjoy the Spirit as much as I have. Scott DeTray Model Aero We are excited to introduce the Model Aero Spirit. Inspired by the magnificent Northrop Grumman B-2 Spirit Stealth Bomber, the Spirit is a great flyer, on land or water. It tracks like an arrow and is

More information

Magpie. Foam Trainer. Magpie Specifications

Magpie. Foam Trainer. Magpie Specifications Magpie Foam Trainer Magpie Specifications Length: 34in. Wingspan (SF): 46in. Wing Area (SF): 414in 2 Wingspan (SP): 40in. Wing Area (SP): 360in 2 Weight (without battery): 12oz. Thank you for purchasing

More information

FLITZEBOGEN-2 Assembly instructions

FLITZEBOGEN-2 Assembly instructions FLITZEBOGEN-2 Assembly instructions Trim the end of the fuselage to the length of 925mm from the nose. Be careful to avoid splitting the carbon fibers. Sand the base of the stab mount in preparation for

More information

AT channel 6 servos

AT channel 6 servos Wing Span: Wing Area: Fuselage Length: Flying weight: Power system: Radio: 60.7in/1540mm 561 sq in/36.3 sq dm 44.1in/1120mm 6.9 Ibs/ 3100g 46(2C0/71(4C) 5 channel 6 servos AT6-46 INSTALLING AILERONS Begin

More information

Cover the wing trailing edge and the aileron leading edge with strapping tape as shown.

Cover the wing trailing edge and the aileron leading edge with strapping tape as shown. Cover the wing trailing edge and the aileron leading edge with strapping tape as shown. The aileron hinges are done using strapping tape on the top and bottom surfaces of the ailerons as shown. Make sure

More information

INSTRUCTION MANUAL. Suitable for Electric or I.C. Engine Power

INSTRUCTION MANUAL. Suitable for Electric or I.C. Engine Power INSTRUCTION MANUAL Suitable for Electric or I.C. Engine Power Congratulations on the purchase of your Irvine Tutor 40 II Radio Control Model Aircraft. Please take some time to carefully read these instructions

More information

Warbird Series Zero - 32 Assembly Manual

Warbird Series Zero - 32 Assembly Manual Warbird Series Zero - 32 Assembly Manual Specifications Wing Span: 32 inches Wing Area: 210 in 2 Fuselage Length: 26 inches Weight (ready to fly): 11 to 13 oz. Wing Loading: 7.5 to 8.9 oz/ft 2 Designed

More information

Cirrus. Special Features: RC function: Dear friends, Thank you for purchasing our F5J competition high performance electric-powered glider Cirrus.

Cirrus. Special Features: RC function: Dear friends, Thank you for purchasing our F5J competition high performance electric-powered glider Cirrus. 1 Cirrus Dear friends, Thank you for purchasing our F5J competition high performance electric-powered glider Cirrus. Cirrus is made from slected special light balsa wood. Special Features: Carbon fuselage

More information

Spitfire Mk.IX ARF. Electric retract system. TopRCModel-USA.com

Spitfire Mk.IX ARF. Electric retract system. TopRCModel-USA.com Electric retract system Thank you very much for purchasing our TRCM optional electric retract set, all our products were passed strict QC before they shipped out to the customers. In order to avoid probably

More information