Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting othe

Transcription

1 AGATA Electronics

2 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

3 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

4

5

6 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

7 Idea of γ-ray tracking Compton Shielded Ge ε ph ~ 10% N det ~ 100 Ω ~40% θ ~ 8º large opening angle means poor energy resolution at high recoil velocity. Previously we had to waste scattered gammas. Technology is available now to track them.. θ ~ 3º Ge Tracking Array ε ph ~ 50% N det ~ 100 Ω ~80% θ ~ 1º Combination of: segmented detectors digital electronics pulse processing tracking the γ-rays

8 Ingredients of γ-tracking γ Highly segmented HPGe detectors 1 Digital electronics to record and process segment signals Identified interaction points (x,y,z,e,t) i Pulse Shape Analysis to decompose recorded waves Reconstruction of tracks e.g. by evaluation of permutations of interaction points 3 e e 3 1 θ Eγ 1 Eγ Eγ 1 θ 2 e 2 reconstructed γ-rays

9 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

10 Initial Data rates for Demonstrator 15 detectors, 10 khz singles, GL-trigger, Ancillary 1kHz into PSA + - SEGMENT ADC GL-Trigger 100 Ms/s 14 bits 200 MB/s LL-Trigger (CC) Pre-processing Energy + save ~100 samples of signal rise time 0.2 MB/s DETECTOR kb/event ~8 MB/s 1 ms/event Pulse Shape Analysis E, t, x, y, z, B/ev 0.2 MB/s GLOBAL AGATA Merge 15*0.2 3 MB/s Ancillary Merge γ-ray tracking HL-Trigger, Storage On Line Analysis, (+ 120 MB/s written out at PSA level) Initially traces will be recorded for off-line validation

11 Segment level processing: energy, time Detector level processing: trigger, time, PSA Global level processing: event building, tracking, software trigger, data storage

12 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

13 AGATA Digitiser

14 Digitiser Block Diagram 44 Channels 100 MHz/14 bits. 38 Optical lines 2Gbits/s. 400 W Power. Cooling by water. Specific Mechanical Housing. Ethernet for Slow Control.

15 AGATA Digitiser Module 36 segments, 1 core, 7 spare= 44 channels each channel 100 MHz, 14 bits (Strasbourg - Daresbury Liverpool) Mounted close to the Detector 5-10 m Power Dissipation around Water Cooling required Testing in Liverpool (December 2006) Production in progress (for 18 modules) 220W Prototype Segment Board (2 boards per crystal)

16 Digitiser & detector

17 Digitiser Slow Control

18

19 Digitiser Upgrade Upgrade control card to run web server inside the digitiser. Other possible work: Change 14bit ADC to 16bits (if input signal is good via MDR is good enough to see improvement) Squeeze into small packaging (if we can do so without compromising the analogue input performance)

20 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

21 What does pre-processing do? Global trigger (optional) Find the useful 1% from the incoming data streams. 100:1 cut 1 data link out 200 bytes x 10KHz = 74Mbytes/sec (no zero suppression) 38 fibres in (Core low/high gain + 36 segs). = 38 x 2Gbps (7.6 Gbytes/sec) N.B. reduction from 50KHz to 10KHz singles rate is for demonstrator only (to help PSA). Preprocessor output rate for full AGATA will be higher- 35 or 50KHz.

22 What does pre-processing do? Deserialises data from the digitiser Extracts all useful parameters which can be calculated on a per-channel basis in real time. Energy Digitiser input offset control, Time Over Threshold (preamp saturation = Pion energy) Trigger (core only) Timestamps the data when a local core trigger is found Passes on these parameters, with leading edge of the digitised trace, to PSA.

23 What does pre-processing do? Interfaces with Global Trigger via GTS mezzanine to reduce data rate if necessary Sends GTS clock and clock synch to digitiser Concentrates and buffers data ready for transfer to PSA Prepares data for PSA (could perform zero suppression if needed)

24 Pre-Processing hardware Carrier (ATCA format) Mezzanines (PMC format) Photos- INFN Padova and CSNSM Orsay

25 Pre-Processing people

26 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

27 GTS Hierarchy

28 GTS ROOT Clk & commands GTS MEZZ Trig Req synch synch clk PP core sends special trig req to GTS mezz when it gets d15 in test mode Clk & commands GTS MEZZ Trig Req synch synch clk PP SEG DATA PP Core DATA PP SEG DATA PP Core DATA Data Data synch clk Data Data synch clk FADC d15 = synch FADC Test Pulser DIGITISER Test pulse D15 = synch FADC FADC Test Pulser DIGITISER Test pulse Ge Digitisers in test mode will return synch in d15 instead of Inhibit. Could loop synch through detector instead using test pulser. Ge

29 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

30 Digitized, optically-transmitted and pre-processed AGATA traces May 28, 2008

31

32 July 2008 energy resolution

33 Feb 2009 Triple Cluster Live tracked data

34 Status of electronics Digitisers 18 built 8 LNL 3 Turkey 2 Strasbourg 5 in DL. Pre-processing Carriers first production cards delivered in Orsay 4/2/09. Under tests before starting remainder of production. Pre-processing Mezzanines production started first cards to be tested week 12. GTS mezzanine Final prototype test starting now Production starts end April

35 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

36

37 From Christophe Theisen s AGATA week talk

38 From Christophe Theisen s AGATA week talk

39 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

40 PRISMA with AGATA DAQ scheme PRISMA SETUP + CONTROL C A A P G D U A C V A Pre-preccessing & Narval Producer VME crate Event rate: ~20kHz (5Mb/sek) GTS... Narval Narval Narval From Piotr Bednarczyk s AGATA week talk

41 Overview of talk AGATA at LNL Electronics needed for gamma ray tracking System overview Digitisers Pre-processing GTS Results Software Connecting other experiments to AGATA International collaboration

42 AGATA- designed by an international team DIGITISER Team size approx 10 people, 3 in UK (Patrick Coleman-Smith, Jim Thornhill, Dave Wells) STFC Daresbury Digitiser digital design and PCB design for core and segment cards, production VHDL, digitiser mechanics University of Liverpool Digitiser Power supply and control boards, control card VHDL, digitiser mechanics IPHC Strasbourg Digitiser analogue design for core and segment cards and VHDL for standalone testing Pre-processing Team Size approx 14 people, 1 in UK (Ian Lazarus) IPN Orsay Carrier VHDL design (FPGA2- trigger distribution) Carrier VHDL production code Carrier commissioning (production run of 34 cards) Original carrier design INFN Padua Carrier rework (prototype and pre-production) Carrier VHDL (release 0 for initial tests) Carrier VHDL (FPGA 0- data readout) Delivery of 6 tested carriers system commissioning GTS Mezzanine CSNSM Orsay Segment mezzanine (hardware and VHDL) Core mezzanine (hardware and VHDL) Production run of core and segment mezzanines IPHC Strasbourg Supply of MWD code for use in core and segment mezzanines in black box format STFC RAL and LPC CAEN VHDL code for carrier readout (PCIe and proprietry FASTER protocols) Global clock and trigger systems (GTS) Team size approx 5 people, none in UK INFN Padua GTS trigger algorithms Clock alignment systems GTS processor card and Mezzanine card design