RGCoaxials RG, low noise and sub-miniature coaxials

Transcription

1 RG, low noise and subminiature coaxials

2 RG Coaxials Contents Page Comparison of coaxial and triaxial cable types 3 RG (LS0H) RG (PVC) RG and SM RG (M) RGD RGT and SMT FR, LS, ZH, RAD FR, FR, LS, FR, LS, FR, LS, FR, LS, Low smoke, zero halogen coax Attenuation and power graphs Standard coax Attenuation and power graphs Standard and subminiature coax Attenuation and power graphs Military grade coax Attenuation and power graphs Doublebraided coax Attenuation and power graphs Standard and subminiature triax Attenuation and power graphs RGL and SML FR, LS Low noise and subminiature low noise coax 16 FEP Sheath Material Information 17 HFI 90 Dielectric Material Information 18 HFS 80 Sheath Material Information 19 PTFE Dielectric and Sheath Material Information Introduction Habia Cable s reputation as a manufacturer of market leading, high performance coaxial cables such as Flexiform and Multibend has been built on a foundation of RG Style Brown coaxial cables. RG (LS0H) These coaxial cables take the popular industry standard RG (PVC) type coaxials such as RG 58 and RG 59 and add a Low Smoke Zero Halogen (LSZH or LS0H) sheath. This provides a completely halogen free cable ideal for use in sensitive areas where use of materials such as PVC that exhibit corrosive and toxic fumes under fireconditions are prohibited. RG (PVC) Using PE dielectrics and PVC sheaths for a low cost, general performance cable, these are the industry standard for coaxial cables. RG and SM Using PTFE dielectrics and FEP sheaths in order to offer high temperature properties. These coaxials typically use nonmagnetic conductors which are less susceptible to passive intermodulation as well as providing a more cost effective solution. RG (M) These coaxial cables are original, military grade Brown coaxials. These RG types use PTFE dielectrics and FEP sheaths in order to offer the highest possible electrical performance from a nonfoamed coaxial. This is complemented by a wide temperature range of 55 o C to +200 o C which enables both a wide range of applications that the coax can be used in, and also excellent power ratings in relation to the size of the coax. RGD These coaxials are built up with a conductor, dielectric and then two braids in contact with one another, then finally an overall sheath. The addition of the second braid improves electrical performance over a range of frequencies, offering a cleaner signal which makes them ideal for long cable runs. RGT and SMT Triaxials are built up with a conductor, dielectric, braid and inner sheath, then a second braid and an outer sheath. In contrast to the RGD types, as the second braid is separated from the first, it can be used as an electrical screen. RGL and SML Designed to be immune to the electrical interference caused by vibration and pressure, low noise cables have in integral carbon layer between the dielectric and the screen which reduces the noise generated from within the cable by factor of over a thousand when compared to standard coaxial cables. In addition to the various options shown here, Habia Cable also manufactures the Speedflex range of coaxes. These are designed to be dimensionally and electrically comparable with the standard RG and RG (M) types such as RG 179 and RG 316, but in addition they are a completely Low Smoke Zero Halogen (LSZH) solution. 2 Ref: RG_12 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

3 RG Coaxials comparison of coaxial and triaxial cable types 1V / 200 o C Variants RG (LS0H) RG (PVC) RG SM RG (M) RGD RGT SMT RGL SML LSZH insdustry standard alt. Industry standard coaxial High performance coaxial Subminiature coaxial Military grade coaxial Double screened coaxial Triaxial Subminiature triaxial Low noise cable Subminiature low noise cable Construction Conductor Shield Tin Plated Copper (TPC) Silver Plated Copper () High Strength Copper Alloy (HSA) Copper Clad Steel (CCS) Silver Plated Copper Clad Steel () Copper (C) Tin Plated Copper (T) Silver Plated Copper (S) Dielectric Sheath PE PTFE HFS 80 T PVC FEP PTFE RG (LS0H) RG (PVC) RG & SM RG (M) RGD RGT & SMT RGL & SML RG (LS0H) RG (PVC) RG & SM RG (M) RGD RGT & SMT RGL Construction Electrical Values Coaxial and Triaxial Types dielectric Ø impedance Ω 0,52 0, ,87 RG (LS0H) RG (PVC) RG & SM RG (M) RGD RGT & SMT RGL & SML SM OD = 1,00mm SM 75 OD = 1,00mm RG 178 OD = 1,75mm SMT OD = 1,60mm SML OD = 1,00mm RG 178 (M) OD = 1,75mm RGD 178 OD = 2,25mm 0,87 0,89 0, ,52 RG 174 OD = 2,80mm 1,52 1,60 75 SM 95 OD = 1,40mm RGT 403 OD = 2,95mm RGL 196 OD = 1,35mm RG 316 OD = 2,45mm RG 179 OD = 2,mm RG 316 (M) OD = 2,70mm RG 179 (M) OD = 2,60mm RGD 316 OD = 2,90mm RGD 179 OD = 3,00mm RGT 316 OD = 3,60mm RGT 179 OD = 3,60mm 1, , ,95 RG 58 (LS0H) OD = 4,95mm RG 58 OD = 4,95mm 2,95 2,95 RG 223 (LS0H) OD = 5,40mm RG 223 OD = 5,40mm RG 180 (M) OD = 3,60mm RGD 180 OD = 4,mm RGT 180 OD = 4,80mm RGL 316 OD = 2,49mm RGL 179 OD = 2,54mm RGL 187 OD = 2,54mm RG 142 OD = 4,80mm 2,95 2,95 3,70 75 RG 59 (LS0H) OD = 6,15mm RG 59 OD = 6,15mm RG 142 (M) OD = 5,mm RG 400 OD = 4,80mm 3, ,70 7,24 RG 214 (LS0H) OD =,80mm RG 214 OD =,80mm 7,24 RG 3 (M) OD = 4,mm RG 400 (M) OD = 5,mm RGT 400 OD = 5,70mm RGL 400 OD = 4,95mm RG 2 (M) OD = 5,15mm RG 4 (M) OD = 7,mm RG 393 (M) OD =,mm RGT 393 OD = 11,mm Ref: RG_OV_04 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 3

4 RG (LS0H) low smoke zero halogen coaxial cables 80 o C Coax Temperature 40 o C to +80 o C Flame retardant IEC Smoke generation IEC 6342 Toxicity IEC Frequency range Up to 2,5 GHz Screening efficiency 40dB (single braid) 70dB (double braid) Velocity propagation 66% Construction Tin Plated Copper (TPC) Conductor Silver Plated Copper () Dielectric HFI 90 Copper Covered Steel (CCS) Shield Braid of Copper (C) Braid of Tin Plated Copper (T) Braid of Silver Plated Copper (S) Sheath HFS 80 T Identification Dielectric: Natural Sheath: Black Marking: TYPE Habia Cable ORDER REFERENCE YEARWEEK BATCHCODE (e.g. RG 58 (LS0H) Habia Cable W ) Description Construction Electrical MBR Order reference RG 58 (LS0H) RG 59 (LS0H) RG 214 (LS0H) RG 223 (LS0H) conductor material TPC 19x 0,18 CCS 7x 0,75 conductor dielectric shield (s) sheath (s) weight V rms imp. cap. static Ø Ø Ø Ø g/m V DC Ω pf/m dynamic 0,90 2,95 T: 3,55 4, ,57 3,70 C: 4,45 6, ,25 7,24 0,89 2,95 S: 8,00 S: 8,70 S: 3, S: 4,, , Electrical data (table) Attenuation (db/0m) Power (W) RG 58 (LS0H) RG 59 (LS0H) RG 214 (LS0H) RG 223 (LS0H) Ref: RG_LS0H_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

5 RG (LS0H) low smoke zero halogen coaxial cables 80 o C Graph line colours Black RG 58 Brown RG 59 Orange RG 214 Green RG 223 Application Habia s RG (LS0H) coaxials take the is industry standard RG (PVC) type coaxials such as RG 58 and RG 59 and add a Low Smoke Zero Halogen (LSZH or LS0H) sheath. This provides a completely halogen free cable that is ideal for use in sensitive areas where the corrosive and toxic gasses released by PVC under fireconditions are prohibited. Electrical data (graph) Attenuation (nom. at 20 o C) Attenuation (db/0m) Power rating (max. at 20 o C, SWR 1.0 and sea level) 0 Watts (W) Ref: RG_LS0H_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 5

6 RG (PVC) standard coaxial cables 70 o C Coax Temperature 40 o C to +70 o C Flame retardant Frequency range Up to 2,5 GHz Screening efficiency 40dB (single braid) 70dB (double braid) Velocity propagation 66% Construction Tin Plated Copper (TPC) Conductor Silver Plated Copper () Dielectric HFI 90 Copper Covered Steel (CCS) Shield Braid of Copper (C) Braid of Tin Plated Copper (T) Braid of Silver Plated Copper (S) Sheath PVC Identification Dielectric: Natural Sheath: Black Marking: TYPE Habia Cable ORDER REFERENCE YEARWEEK BATCHCODE (e.g. RG 58 Habia Cable W ) RG 58 RG 59 RG 174 RG 214 RG 223 Description Construction Electrical MBR Order reference conductor material TPC 19x 0,18 CCS CCS 7x 0,16 7x 0,75 conductor dielectric shield (s) sheath (s) weight V rms imp. cap. static Ø Ø Ø Ø g/m V DC Ω pf/m dynamic 0,90 2,95 T: 3,55 4, ,57 3,70 C: 4,45 6, ,48 1,52 T: 2,23 2, ,25 7,24 0,89 2,95 S: 8,00 S: 8,70 S: 3, S: 4,, , Electrical data (table) Attenuation (db/0m) Power (W) RG RG RG RG RG Ref: RG_PVC_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

7 RG (PVC) standard coaxial cables 70 o C Graph line colours Black RG 58 Brown RG 59 Red RG 174 Orange RG 214 Green RG 223 Application Coaxials use PE dielectrics and PVC sheaths. These are the industry standard for coaxial cables. RGcoaxials Electrical data (graph) Attenuation (nom. at 20 o C) Attenuation (db/0m) Power rating (max. at 20 o C, SWR 1.0 and sea level) 0 Watts (W) Ref: RG_PVC_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 7

8 RG and SM standard and subminiature coaxial cables 200 o C Coax Temperature 55 o C to +200 o C Flame retardant IEC UL 1581 VW1 Smoke generation IEC 6342 Toxicity IEC Frequency range Up to 2,5 GHz Screening efficiency 40dB (single braid) 70dB (double braid) Velocity propagation 70% Construction Conductor Silver Plated Copper () Silver Plated High Strength Alloy (HSA) Dielectric PTFE Shield Braid of Silver Plated Copper (S) Sheath FEP Identification Dielectric: Natural Sheath: Browntransparent Marking: TYPE Habia Cable ORDER REFERENCE YEARWEEK BATCHCODE (e.g. RG 142 Habia Cable W ) RG 142 RG 178 RG 179 RG 316 RG 400 SM SM 75 SM 95 Description Construction Electrical MBR Order reference conductor material 7x 0, 7x 0, 7x 0,18 (9x 0,20 HSA HSA HSA conductor dielectric shield (s) sheath (s) weight V rms imp. cap. static Ø Ø Ø Ø g/m V DC Ω pf/m dynamic 0,94 2,95 S: 3, S: 4, 4, , 0,87 S: 1,37 1,75 8 0, 1,60 S: 2,15 2, 15 0,54 1,52 S: 2,05 2, ,98 2,95 S: 3, S: 4,15 4, ,16 0,52 S: 0,85 1,00 3 0, 0,55 S: 0,90 1,00 3 0, 0,95 S: 1, 1, Electrical data (table) Attenuation (db/0m) Power (W) RG RG RG RG RG SM SM SM Ref: RG_SM_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

9 RG and SM standard and subminiature coaxial cables 200 o C Graph line colours Black RG 142 Brown RG 178 Red RG 179 Grey RG 316 Brown (dot) RG 400 Orange (dot) SM Green (dot) SM 75 Blue (dot) SM 95 Application Coaxials use PTFE dielectrics and FEP sheaths in order to offer high temperature properties. These coaxials typically use nonmagnetic conductors which are less susceptible to passive intermodulation as well as providing a more cost effective solution to the coppercovered steel conductor coaxes. Electrical data (graph) Attenuation (nom. at 20 o C) Attenuation (db/0m) Power rating (max. at 20 o C, SWR 1.0 and sea level) 0 Watts (W) Ref: RG_SM_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 9

10 RG (M) military grade coaxial cables 200 o C Coax Temperature 55 o C to +200 o C Flame retardant IEC UL 1581 VW1 Smoke generation IEC 6342 Toxicity IEC Frequency range Up to 2,5 GHz Screening efficiency 40dB (single braid) 70dB (double braid) Velocity propagation 70% Construction Conductor Silver Plated Copper () Silver Plated Copper Covered Steel () Dielectric PTFE Shield Braid of Silver Plated Copper (S) Sheath FEP Identification Dielectric: Natural Sheath: Browntransparent Marking: TYPE Habia Cable ORDER REFERENCE YEARWEEK BATCHCODE (e.g. RG 142 (M) Habia Cable W ) Description Construction Electrical MBR Order reference RG 142 (M) RG 178 (M) RG 179 (M) RG 180 (M) RG 2 (M) RG 3 (M) RG 4 (M) RG 316 (M) RG 393 (M) RG 400 (M) conductor material 7x 0, 7x 0, 7x 0, 7x 0,18 7x 0,80 19x 0,20 conductor dielectric shield (s) sheath (s) weight V rms imp. cap. static Ø Ø Ø Ø g/m V DC Ω pf/m dynamic 0,94 2,95 S: 3, S: 4, 5, 56 0, 0,87 S: 1,37 1,75 8 0, 1,60 S: 2,05 2, , 2,60 S: 3,15 3, ,64 3,70 S: 4, 5, ,94 2,95 S: 3,70 4, 45 1, 4,70 S: 5,40 S: 6, 7, 1 0,54 1,52 S: 2,00 2, ,43 7,24 0,98 2,95 S: 8,00 S: 8,70 S: 3, S: 4,, 180 5, Electrical data (table) Attenuation (db/0m) Power (W) RG 142 (M) RG 178 (M) RG 179 (M) RG 180 (M) RG 2 (M) RG 3 (M) RG 4 (M) RG 316 (M) RG 393 (M) RG 400 (M) Ref: RG_M_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

11 RG (M) military grade coaxial cables 200 o C Graph line colours Black RG 142 (M) Brown RG 178 (M) Red RG 179 (M) Orange RG 180 (M) Green RG 2 (M) Blue RG 3 (M) Violet RG 4 (M) Grey RG 316 (M) Black (dot) RG 393 (M) Brown (dot) RG 400 (M) Application The original, military grade Brown coaxials. These RG types use PTFE dielectrics and FEP sheaths in order to offer the highest possible electrical performance from a nonfoamed coaxial. This is complemented by a wide temperature range of 55 o C to +200 o C which enables both a wide range of applications that the coax can be used in, and also excellent power ratings in relation to the size of the coax. Electrical data (graph) Attenuation (nom. at 20 o C) Attenuation (db/0m) Power rating (max. at 20 o C, SWR 1.0 and sea level) 0 Watts (W) Ref: RG_M_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 11

12 RGD doublebraided coaxial cables 200 o C Coax Temperature 55 o C to +200 o C Flame retardant IEC UL 1581 VW1 Smoke generation IEC 6342 Toxicity IEC Frequency range Up to 2,5 GHz Screening efficiency 40dB (single braid) 70dB (double braid) Velocity propagation 70% Construction Conductor Silver Plated Copper Covered Steel () Dielectric PTFE Shield(s) Braid of Silver Plated Copper (S) Sheath FEP Identification Dielectric: Natural Sheath: Browntransparent Marking: TYPE Habia Cable ORDER REFERENCE YEARWEEK BATCHCODE (e.g. RGD 178 Habia Cable W ) RGD 178 RGD 179 RGD 180 RGD 316 Description Construction Electrical MBR Order reference conductor material 7x 0, 7x 0, 7x 0, 7x 0,18 conductor dielectric shield (s) sheath (s) weight V rms imp. cap. static Ø Ø Ø Ø g/m V DC Ω pf/m dynamic 0, 0,87 0, 1,60 0, 2,60 0,54 1,52 S: 1,37 S: 1,85 S: 2,05 S: 2,65 S: 3,15 S: 3,65 S: 2,00 S: 2,45 2, , , 39 2, Electrical data (table) Attenuation (db/0m) Power (W) RGD RGD RGD RGD Ref: RG_D_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

13 RGD doublebraided coaxial cables 200 o C Graph line colours Black RGD 178 Red RGD 179 Orange RGD 180 Grey RGD 316 Application Built up with a conductor, dielectric and then two braids in contact with one another, then finally an overall sheath. The addition of the second braid improves electrical performance over a range of frequencies, offering a cleaner signal which makes them ideal for long cable runs. Electrical data (graph) Attenuation (nom. at 20 o C) Attenuation (db/0m) Power rating (max. at 20 o C, SWR 1.0 and sea level) 0 Watts (W) Ref: RG_D_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 13

14 RGT and SMT standard and subminiature triaxial cables 200 o C Triax Temperature 55 o C to +200 o C Flame retardant IEC UL 1581 VW1 Smoke generation IEC 6342 Toxicity IEC Frequency range Up to 2,5 GHz Screening efficiency 60dB Velocity propagation 70% Construction Silver Plated Copper () Conductor Silver Plated Copper Covered Steel () Silver Plated High Strength Alloy (HSA) Dielectric PTFE Inner Shield Outer Shield Braid of Silver Plated Copper (S) Inner Sheath Outer Sheath FEP Identification Dielectric: Natural Sheath 1: Natural Sheath 2: Browntransparent Marking: TYPE Habia Cable ORDER REFERENCE YEARWEEK BATCHCODE (e.g. RGT 179 Habia Cable W ) RGT 179 RGT 180 RGT 316 RGT 393 RGT 400 RGT 403 SMT Description Construction Electrical MBR Order reference conductor material 7x 0, 7x 0, 7x 0,18 7x 0,80 19x 0,20 7x 0, HSA conductor dielectric shield (s) sheath (s) weight V rms imp. cap. static Ø Ø Ø Ø g/m V DC Ω pf/m dynamic 0, 1,60 0, 2,60 0,51 1,52 2,40 7,25 0,98 2,95 0, 0,84 0,16 0,52 S: 2,05 S: 3,15 S: 3,15 S: 4,40 S: 2,05 S: 3,15 S: 7,95 S: 9,90 S: 3,55 S: 4,90 S: 1, S: 2,35 S: 0,85 S: 1,35 2,55 3,60 3,60 4,80 2, 3,60 9,00 11, 4, 5,70 1,90 2,95 1,00 1, Electrical data (table) Attenuation (db/0m) Power (W) RGT RGT RGT RGT RGT RGT SMT Ref: RG_T_03 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

15 RGT and SMT standard and subminiature triaxial cables 200 o C Graph line colours Red RGT 179 Orange RGT 180 Grey RGT 316 Black (dot) RGT 393 Brown (dot) RGT 400 Red (dot) RGT 403 Orange (dot) SMT Application Triaxials are built up with a conductor, dielectric, braid and inner sheath, then a second braid and an outer sheath. In contrast to the RGD types as the second braid is separated from the first it can be used as an electrical screen. Electrical data (graph) Attenuation (nom. at 20 o C) Attenuation (db/0m) Power rating (max. at 20 o C, SWR 1.0 and sea level) 0 Watts (W) Ref: RG_T_03 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 15

16 RGL and SML low noise cables 200 o C Low noise cable Temperature 55 o C to +200 o C Flame retardant IEC UL 1581 VW1 Smoke generation IEC 6342 Toxicity IEC Frequency range Up to 2,5 GHz Screening efficiency 40dB (single braid) 70dB (double braid) Velocity propagation 70% Applications Suitable for use with piezoelectric sensors as well as other highly sensitive detection or measurement equipment, low noise cables have extremely low microphonic sensitivity due to the application of an integral carbon layer between the dielectric and the screen. Any electrical charge formed by movement or pressure on the cable is rapidly returned to and from the screen, effectively trapping these unwanted signals so that they are unable to interfere with the equipment connected to the cable. Construction Silver Plated Copper () Conductor Silver Plated Copper Covered Steel () Silver Plated High Strength Alloy (HSA) Dielectric Shield Braid of Silver Plated Copper (S) Sheath PTFE with integral lownoise carbon dispersion layer RGL: FEP or PTFE SML: FEP RGL 179 RGL 187 RGL 196 RGL 316 RGL 400 SML Description Construction Electrical MBR Order reference conductor material 7x 0, 7x 0, 7x 0, 7x 0,18 19x 0,20 HSA conductor dielectric shield (s) sheath (s) weight V rms imp. cap. static Ø Ø Ø Ø g/m V DC Ω pf/m dynamic 0, 0, 0, 0,51 0,98 0,16 1,60 LN: 1,62 1,60 LN: 1,62 0,89 LN: 0,91 1,56 LN: 1,58 2,98 LN: 3,00 0,52 LN: 0,54 S: 2,05 FEP: 2,54 16 S: 2,05 PTFE: 2,69 16 S: 1,35 PTFE: 2,00 9 S: 2,00 FEP: 2,49 15 S: 3,55 S: 4, FEP: 4,95 64 S: 0,80 FEP: 1, Ref: RG_L_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

17 FEP (K) 65 o C to 205 o C HabiaMaterials Key properties Chemicals (Acids) Excellent (Bases) Excellent (Fuels) (Oils) Excellent Excellent Flame retardant Low smoke generation Mechanically resistant Insulation, inner & outer sheath Applications FEP is a thin wall insulation and sheathing material intended for applications up to 200 o C. Although primarily used as a sheathing material over PTFE data and coaxial cables, it is also often used as a dielectric in its own right given a dielectric constant of 2.1. FEP also finds use in medical applications and control/signal cables for extreme temperature environments including space. Properties: FEP has excellent nonageing characteristics and a broad temperature range from 200 o C (a nominal operating temperature of 65 o C) to +205 o C. Passing many of the most stringent fire tests including IEC and UL 94 V0, and as one of the most chemically resistant polymers, FEP is one of the most versatile materials Habia Cable has available. HabiaMaterials Physical and mechanical Electrical Flammability Properties Results Test Method Conditions Value Continuous temperature IEC ,000 hrs +205 C Density ASTM D g/cm 3 Elongation at break ASTM D 638 0% Hardness ASTM D 2240 Shore D 55 Radiation resistance IEC ^4 Gy Temperature range Internal 200 o C +205 C Tensile strength at break ASTM D MPa Water absorption ASTM D C < 0.01% Dielectric constant ASTM D khz MHz Dielectric strength ASTM D mm film 3.2mm sheet >80 kv/mm 20 kv/mm Dissipation factor ASTM D khz MHz Volume resistivity ASTM D 257 ^18 Ω/cm Combustion corrosivity DIN ph 2.3 / us/cm Flammability UL mm V0 Flame retadancy Oxygen index ASTM D % Smoke density ASTM E662 Flaming Nonflaming < < Smoke index Temperature index NES 715 >400 C Toxicity index Abrasion resistance Radiation Resistance FR Volume Resistivty Flexibility Dielectric Number Fuel & Oil resistance Water resistance Smoke generation Toxicity (Smoke) Available colours Black Brown Red Orange Yellow Green Blue Violet Grey White Pink Natural Ref: MI_K_02 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 17

18 HFI 90 (P) o C to <80 o C HabiaMaterials Key properties Chemicals (Acids) Good (Bases) Good (Fuels) (Oils) Weak Weak Halogen free Low smoke generation Radiation tolerant Insulation Applications Primarily used as a dielectric material for coaxials and databus cables, HFI 90 is often used in benign environments and applications. Options of Low Density (L) and High Density (H) are available. Properties HFI 90 has the best electrical properties of any halogen free material with a dielectric constant of 2.3 and very high insulation resistance. Although the material does not have any particular capability in fire it is highly suitable for use in water (where it is often used with HFS 0), or in radiation. HFI 90 also has very high abrasion resistance and can be crosslinked to further improve its physical and mecahnical properties. The electrical properties of HFI 90 are essentially unchanged after crosslinking, however chemical resistance is improved, particularly oil resistance at elevated temperatures. HabiaMaterials Physical and mechanical Electrical Flammability Properties Results Test Option Method Conditions Value Continuous service temperature HFI 90 L HFI 90 H Internal 20,000 hrs +70 o C +80 o C Density All ISO g/cm 3 Elongation at break All IEC mm/min 600% Hardness HFI 90 L HFI 90 H ISO R 868 Shore D, 1 Sec. Radiation resistance All IEC ^6 Gy Temperature range Tensile strength at break HFI 90 L HFI 90 H HFI 90 L HFI 90 H Internal IEC mm/min 61 o C o C 15 MPa 17 MPa Water absorption Dielectric constant All IEC khz at 25 o C 1 MHz Dielectric strength All IEC kv/mm Dissipation factor HFI 90 L HFI 90 H IEC MHz Volume resistivity All IEC o C 90 o C ^16 Ω/cm ^15 Ω/cm Combustion corrosivity Flammability Flame retardancy Oxygen index Smoke density Smoke index Temperature index Toxicity index +70 C +80 C Abrasion resistance Radiation Resistance FR Volume Resistivty Flexibility Dielectric Number Fuel & Oil resistance Water resistance Smoke generation Toxicity (Smoke) Available colours Black Brown Red Orange Yellow Green Blue Violet Grey White Pink Natural 18 Ref: MI_P_03 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

19 HFS 80, HFS 80 T (W) 40 o C to 80 o C HabiaMaterials Key properties Chemicals (Acids) Good (Bases) Good (Fuels) (Oils) Fair Fair Flame retardant Halogen free Low smoke generation Radiation tolerant Inner & outer sheath Applications Although primarily a general purpose material, HFS 80 has found extensive use in the rail industry thanks to its considerable fire, smoke and toxicity properties. HFS 80 T is a variant of HFS 80 that was developed primarily for the telecomms market. It is Habia s most common sheath material for Low Smoke Zero Halogen (LSZH) coaxial cables. Properties HFS 80 is one of Habia s best peforming materials in fire, and is arguably the best material for smoke generation and toxicity. The HFS 80T variant offers additional UV stability for external use. The lower temperature range has been extended from 25 o C down to 40 o C following further testing by R&D. HabiaMaterials Physical and mechanical Electrical Flammability Properties Results Test Option Method Conditions Value Continuous temperature Density Elongation at break HFS 80 HFS 80 T HFS 80 HFS 80 T ASTM D 792 ASTM D 792 IEC mm/min 1.58 g/cm 3 1. g/cm 3 0% 155% Hardness All ASTM D 2240 Shore D 55 Radiation resistance All IEC ^6 Gy Temperature range All Internal 25 o C +80 C Tensile strength at break HFS 80 HFS 80 T IEC mm/min 11 MPa.5 MPa Water absorption Dielectric constant All ASTM D khz 3.75 Dielectric strength Dissipation factor All ASTM D khz Volume resistivity All ASTM D 257 ^13 Ω/cm Combustion corrosivity All IEC ph 4.5 / 9uS/mm Flammability All UL mm V0 Flame retardancy Oxygen index HFS 80 HFS 80 T ISO ISO Smoke density All ASTM E 662 1,5mm Flaming Nonflaming Smoke index All NES 711 per 0g 15 Temperature index All ISO o C Toxicity index HFS 80 HFS 80 HFS 80 T NES 713 NF X 700 NES % 36% Abrasion resistance Radiation Resistance FR Water resistance Flexibility Smoke generation Fuel & Oil resistance Blue line: HFS 80 Red line: HFS 80 T Available colours Toxicity (Smoke) Black Brown Red Orange Yellow Green Blue Violet Grey White Pink l Ref: MI_W_03 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 19

20 PTFE (E) 200 o C to 260 o C HabiaMaterials Key properties Chemicals (Acids) Excellent (Bases) Excellent (Fuels) (Oils) Excellent Excellent Abrasion resistant Flame retardant Low smoke generation Mechanically tough Insulation, inner & outer sheath Applications PTFE is extensively used in a wide variety of applications. Particularly suited to datacoms where it is used as the dielectric material for coaxials and data pairs, due to its stability over an extensive frequency range. It is used for many high temperature applications such as gas turbines and high voltage gas ignition wires. Due to its thinwall properties, PTFE is used in aerospace and even in vacuum. Properties PTFE offers unparalleled electrical performance with the lowest dielectric constant of any plastic, together with excellent mechanical properties. Amongst these are a remarkable solder resistance and extremely low outgassing. It is sutable for use from (fixed installed) 200 o C or (dynamic) 65 o C up to +200 o C. PTFE is processed by either tapewrapping or cold ramextrusion and sintering. HabiaMaterials Physical and mechanical Electrical Flammability Properties Results Test Method Conditions Value Continuous service temperature IEC ,000hrs +260 o C Density ASTM D g/cm 3 Elongation at break ASTM D % Hardness ASTM D 2240 Shore D 58 Radiation resistance IEC ^3 Gy Temperature range Internal 200 o C +260 C Tensile strength at break ASTM D MPa Water absorption ASTM D 570 <0.01% Dielectric constant ASTM D khz MHz Dielectric strength ASTM D kv/mm Dissipation factor ASTM D khz MHz Volume resistivity ASTM D 257 ^18 Ω/cm Combustion corrosivity DIN ph 2.2 / 40uS/cm Flammability UL mm V0 Flame retardancy Oxygen index ASTM D 2863 >95% Smoke density ASTM E662 Flaming Nonflaming < < Smoke index Temperature index NES 715 >400 o C Toxicity index Abrasion resistance Radiation Resistance FR Volume Resistivty Flexibility Dielectric Number Fuel & Oil resistance Water resistance Smoke generation Toxicity (Smoke) Available colours Black Brown Red Orange Yellow Green Blue Violet Grey White Pink Natural 20 Ref: MI_E_03 Created: CJV Approved: BD Date: Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

21 Notes Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 21

22 Notes 22 Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of

23 Notes Data indicates nominal values unless stated otherwise, is only valid for reference purposes at the time of 23

24 Head Office SWEDEN Habia Cable AB Kanalvägen 18, Box 76 SE Upplands Väsby Sweden Tel: +46 (0) Fax: +46 (0) info.se@habia.com Production CHINA CHINA HONG KONG NORWAY Habia Cable China Ltd Habia Cable China Ltd Habia Cable Asia Ltd Habia Cable AB No 16 Changjiang Middle Road No 16 Changjiang Middle Road Flat 19, 11/F Fast Industrial Building Riddervoldsgate 4 New District of Changzhou New District of Changzhou 658 Castle Peak Road 0256 Oslo CN2122 Jiangsu CN2122 Jiangsu Lai Chi Kok Norway China China Kowloon Tel: +47 (0) Tel: +86 (0) Tel: +86 (0) Hong Kong Fax: +46 (0) Fax: +86 (0) Fax: +86 (0) Tel: info.no@habia.com info.cn@habia.com info.cn@habia.com Fax: info.hk@habia.com SWEDEN GERMANY DENMARK Habia Cable AB Habia Cable Production GmbH Habia Cable AB INDIA Kanalvägen 18, Box 76 Oststrasse 91 Buchwaldsgade Habia Cable SE Upplands Väsby DE22844 Norderstedt DK00 Odense C. #1/1, Sai Towers Sweden Germany Denmark First Floor, R.V Road Tel: +46 (0) Sales offices Tel: +49 (0) Tel: +45 (0) Behind Kempegowda Statue Fax: +46 (0) Fax: +49 (0) Fax: +45 (0) IN Bangalore info.se@habia.com info.de@habia.com info.dk@habia.com India Tel: UNITED KINGDOM POLAND FINLAND info.in@habia.com Habia Cable Limited Habia Cable SP.Z.O.O. Habia Cable AB Unit, Short Way Lubieszyn 8 Jukolansuora 3 C5 KOREA Thornbury PL72002 Dołuje FI04340 Tuusula Habia Cable Asia Ltd Bristol, BS35 3UT Poland Finland Korea Branch Office United Kingdom Tel: +48 (0) Tel: +358 (0) Rm 9, SuseoTower Tel: +44 (0) Fax: +48 (0) Fax: +358 (0) Suseodong Fax: +44 (0) info.pl@habia.com info.fi@habia.com Gangnamgu, Seoul info.uk@habia.com SWEDEN FRANCE Korea Habia Cable AB Habia Cable SA Tel: +82 (0) Elementvägen 8, Box 8 0 Avenue Denis Papin Fax: +82 (0) SE Söderfors FR45800 Saint Jean de Braye info.kr@habia.com Sweden France Tel: +46 (0) Tel: +33 (0) NETHERLANDS Fax: +46 (0) Fax: +33 (0) Habia Cable BV info.se@habia.com info.fr@habia.com Voorerf GM Breda SWEDEN GERMANY The Netherlands Habia Cable CS Technology AB Habia Cable GmbH Tel: +31 (0) Dalénum 27 Zeppelinstrasse 5/1 Fax: +31 (0) SE Lidingö DE89231 NeuUlm info.nl@habia.com Sweden Germany Tel: +46 (0) Tel: +49 (0) Fax: +46 (0) Fax: +49 (0) info.cst@habia.com info.de@habia.com Iss.5