General Specifications

Transcription

1 General Specifications µr800 Recorder GS 04H03B0-0E The µr800 is a compact recorder with a recording width of 80mm. The model family consists of,, 3, 4 pen and 6,, 8, 4 dot model. Pen models realize continuous recording for each channel, whereas the dot-printing model realizes a high recording speed of 6dot / 0sec., dot / 5sec., 8dot / 0sec., 4dot / 30sec. Its input is universal, which means that it is freely selectable to use inputs like direct voltage, Thermo-couple, Resistance Temperature Detector, contact input, etc. In addition to analog recording, digital data like date & time, measured values, tags, units, scale values, chart speed, alarms, calculated values, etc. can also be printed. High reliability is realized by in house developed contact free technology, such as high breakdown voltage semiconductor relays, and DC brushless servomotors. Furthermore the µr800 has a short case of only 0mm. Good readability is realized by using 5 7 VFD display and its setting is made easy because of the interactive program menu. Real time data is also displayed as a bargraph. The µr800 can be used as a monitoring device and as a quality control instrument in many applications (such as process temperature monitoring, pollution, construction, furnaces, field of medical diagnosis, field of refrigerating, etc.). STANDARD SPECIFICATIONS General Specifications Construction Mounting: Flush Panel Mounting (vertical) Mounting may be inclined up to 30, rear below front (with horizontal base). Allowable panel thickness: to 6mm Material: Case: drawn steel, front door: aluminium die casting. Finish: Case and door-frame: lamp black (Mansell 0.8Y.5 / 0.4 or equivalent) Door: Splash and dust-proof (based on DIN IP54). Dimensions: mm (see dimensional drawings) Weight (approx.): pen 8.9kg 6 dot 9.kg pen 9.0kg dot 9.4kg 3 pen 9.kg 8 dot 9.5kg 4 pen 9.4kg 4 dot 9.6kg µr800 (4-dot model) Model,, 3, and 4 pen, 6,, 8, and 4 dot-model. Input Inputs: DCV: Direct Current Voltage input 0mV to 0V range. TC: Thermo couple. RTD: Resistance Temperature Detector. DI: Digital Input (contact or DC Voltage, TTL level). DCA: Direct Current Input (using external shunt resistor (0Ω, 00Ω, 50Ω) ) Measuring range: selectable per channel Input Type Range Measuring Range DC V 0 mv 60 mv 00 mv V 6 V 0 V 0.00 to 0.00mV to 60.00mV 00.0 to 00.0mV.000 to.000v to 6.000V 0.00 to 0.00V T00.EPS 55 Takamuro-cho, Kofu-shi, Yamanashi-ken, Japan Phone: Facsimile: GS 04H03B0-0E Copyright May. 99(YK) 8th Edition Feb. 004(YG)

2 Input Type Range TC RTD R* S* B* K* E* J* T* N* W* 3 L* 4 U* 4 Measuring Range C 0.0 to C 0.0 to C 0.0 to 80.0 C 00.0 to C 00.0 to C 00.0 to 00.0 C 00.0 to C 0.0 to C 0.0 to 35.0 C 00.0 to C 00.0 to C Measuring Range F 3 to 300 F 3 to 300 F 3 to 3308 F 38.0 to 498 F 38.0 to 47.0 F 38.0 to 0.0 F 38.0 to 75.0 F 3 to 37 F 3 to 499 F 38.0 to 65.0 F 38.0 to 75.0 F Input Type Range Measuring Range C Measuring Range F DI (Digital Input) Pt00* 5 JPt00* 5 Input Type Range Voltage Input Contact Input 00.0 to C 00.0 to C Measuring Range 38.0 to.0 F 38.0 to 0.0 F less than.4v: OFF; more than.4v: ON (TTL) contact ON / OFF * R, S, B, K, E, J, T: ANSI, IEC 584, DIN IEC 584, JIS C * N:Nicrosil-Nisil, IEC 584, DIN IEC 584 *3 W:W 5% Re-W 6% Re (Hoskins Mfg Co) *4 L: Fe-CuNi, DIN 4370 U: Cu-CuNi, DIN 4370 *5 Pt00: JIS C , JIS C , IEC 75, DIN IEC 75 JPt00: JIS C , JIS C T00.EPS Measurement Interval: Pen model: 5ms / channel Dot printing model:.5s / 6-, -, 8-, 4dot In case of 00ms integration:.5s / 6 dot, 5s / dot, 0s / 8 dot, 0s / 4 dot A / D Integration Time: AUTO / FIX selectable AUTO: 0ms (50Hz) or 6.7ms (60Hz), automatically selected depending on the power supply frequency. FIX: 0ms (50Hz), 6.7ms (60Hz) or 00ms (50 / 60Hz) can be set. 00ms integration time for dot printing model only TC Burnout: ON / OFF selectable (per channel) Burnout upscale / downscale selectable (common for all channels) Normal: less than kω, burnout: more than 0MΩ Measuring current: approx. 00nA. Filter: Pen model: Signal damping (ON / OFF selectable per channel; in case of ON: time constant from, 5, 0sec). Dot printing model: Moving average (ON / OFF selectable per channel; in case of ON: averaging times from to 6 scans). Calculation: Differential computation: Between any two channels, however reference channel number must be less than measuring channel number. Available for DCV, TC, and RTD range. Both channels must have same range. Linear scaling: Available for DCV, TC and RTD range. Scaling limits: 0000 to 0000 Data display & printout range: 9999 to 0000 Decimal point: user selectable (should be specified when entering scale value) Unit: user settable, up to 6 characters (alphanumerical & special characters). Square root: Available for DCV range. Scaling limits: 0000 to 0000 Data display & printout range: 9999 to 0000 Decimal point: user selectable Unit: user settable, up to 6 characters (alphanumerical & special characters). Recording and Printing Recording Method: Pen model: Disposable felt pens, Plotter pen Dot printing model: 6 color wire dot. Pen Offset Compensation: ON / OFF selectable (Pen model only) Effective Recording Width: 80mm Chart: Plain-paper Z-fold chart (0m) Step Response Time (pen): Less than.5sec (acc. to IEC TC85 method). Recording Period: Pen model: Continuous for each channel. Dot printing model: Max. 6 dot / 0sec, dot / 5sec, 8 dot / 0sec, 4 dot / 30sec, AUTO / FIX selectable AUTO:Analog recording interval is depending on the chart speed FIX: Analog recording interval is set to shortest period Chart Speed: Pen model: 5 to 000mm/h (8 increments) Dot printing model: to 500mm/h (mm step) Chart Speed Change: speed, speed change by remote control signals (option). Chart Speed Accuracy: within ± 0.% (for recordings longer than 000mm, related to the grid of the chart paper) All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00

3 Relation between Chart Speed and : (Pen-model) Chart Speed 5to 9mm/h 0 to 500mm/h 600 to 000mm/h (6-, -dot model) Chart Speed to 9mm/h 0 to 00mm/h 0 to 500mm/h (8-, 4-dot model) Chart Speed to 9mm/h 0 to 50mm/h 5 to 500mm/h Periodic Channel No. or Tag No. Channel No. or Tag No. Periodic Periodic Alarm Message Chart Speed Change Time T030.EPS Alarm Message Chart Speed Change Time T030.EPS Alarm Message Chart Speed Change Time T0303.EPS Relation between chart speed and printing intervals of periodic printouts: (Pen-model) Chart Speed 5 to 9mm/h 0 to 8mm/h 0 to 36mm/h 40 to 7mm/h 75 to 35mm/h 50 to 80mm/h 00 to 30mm/h 360 to 500mm/h more than 600mm/h Printing Interval of Periodic Every 8 hours Every 4 hours Every hours Every hour Every 30 minutes Every 0 minutes Every 0 minutes T0304.EPS (Dot-printing model) Chart Speed Printing Interval of Periodic 6-dot model -dot model 8-dot model 4-dot model to 9mm/h 0 to 9mm/h Every 8 hours Every hours Every hours Every 4 hours 0 to 39mm/h Every 4 hours Every 8 hours Every 8 hours Every hours 40 to 50mm/h Every hours Every 4 hours Every 4 hours Every 8 hours 5 to 79mm/h Every hours Every 4 hours 80 to 00mm/h Every hour Every hours 0 to 500mm/h T0305.EPS 3 Recording Colors: Pen model: pen=red, pen=green, pen3=blue, pen4=violet, plotter pen=purple Dot printing model: ch, 7, 3, 9=purple, ch, 8, 4, 0=red, ch3, 9, 5, =green, ch4, 0, 6, =blue, ch5,, 7, 3=brown, ch6,, 8, 4=black (color can be assigned to any channel) Recording Format:. Analog recording: Zone recording: Span: More than 5mm (in mm steps). Partial expanded recording: Boundary position: to 99% Boundary value: Within recording span. Digital printout: Channel (dot model only): Channel number or TAG will be printed during analog recording. Approx. every 5mm this print will occur. Alarm: At the right side of the chart, CH. No. or TAG, Type of alarm, ON / OFF time (h/m) will be printed. It is selectable to get ON / OFF time of alarms, or ON time, or no alarms (common for all channels). Periodic printout: At the left side of the chart, date (m/d), time (h/m) chart speed, and measured data of every channel will be printed. Printing interval is INT / EXT selectable. INT: Using internal timer. Depending on chart speed or on interval which is selectable (up to 4 hours). EXT: Using remote control option Channel No. or TAG printout: Selectable, common for all channels. Measuring printout: ON / OFF selectable for each channel. Scale printout: Recording span more than 40mm, at 0% and 00% values will be printed. (When using partial expanded recording, boundary value will also be printed). ON / OFF selectable (common for all channels) of recording colors (pen model only) Date, time and chart speed Message printout: Using panel key or remote control option. Up to 5 messages. Contents: time (h/m) and message (up to 6 characters). Record start time: Time (h/m) will be printed when recording starts, ON / OFF selectable Chart speed printout: Time (h/m) when chart speed is changed will be printed, ON / OFF selectable. All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00

4 List printout: Listings of range and alarm setting, etc. will be printed. Manual printout: Using panel key or remote control option. Measured values of that moment will be printed, while trend recording will be interrupted. SET UP List printout: Listings of settings in SET UP Mode will be printed. Display Display Method: VFD (5 7 dot matrix, 0 characters). Digitial Display: AUTO Channel No. or TAG No., kind of alarm, measured values, unit (when TAG No. is displayed, front 4 characters), for each channel alternately MANUAL Channel No., kind of alarm, measured values, unit (when TAG No. is displayed, front 4 characters), for one specific channel CLOCK Year / month / date and hour / min / sec will be displayed VIEW Operating status of IC memory card will be displayed Bargraph Display: Measured data Alarm Left-referenced (%) bargraph and center zero bargraph (selectable for each channel). Setting level of alarm, in case of alarm flashing display. Alarm status display: Channel No. will be displayed in case of alarm (dot model only) Other Displays: RCD:Recording in progress, POC: Pen offset compensation (pen model only), SET: Set mode, ALM: Shared alarm (not corresponding to any channel), CHT: Chart end indicator (optional), BAT: Low battery. AUTO, MAN, CLK: Display status of operation mode Power Supply Rated Power Voltage: 00 to 40VAC, automatically selected depending on the power supply voltage Usable power voltage ranges: 90 to 3, 80 to 50VAC Rated Power Frequency: 50 / 60 Hz, automatically selected Power Consumption: (approx.) 4 pen 6,, 8, 4 dot * : In Balance 00VAC Power Source 30VA* 3VA* 40VAC Power Source 40VA* 3VA* Maximum 70VA 70VA T040.EPS 4 Alarm Number of levels: Up to four levels for every channel (High, Low, Delta high, Delta low, High-rate-of-change, Low-rate-of change selectable). Interval time of rate-of-change alarm is the measuring interval times to 5 (selectable, and common for both rate-of-change alarms). Display: Set value: It is indicated as a point on the bargraph. In case of an alarm: This point will start flashing on the bargraph and the digital display will show the kind of alarm and alarm indicator in different display will show alarm For the dot model, the channel No. where the alarm occurred will also be displayed. Hysteresis: Approx. 0.5% of recording span (only High, Low alarm) and 0%, selectable (common for all channels and all levels). Alarm indication when ALARM ACK-key is pressed: Non-hold-type: Alarm display is not affected when the ALARM ACK-key is pressed. Hold-type: When alarm occurs, alarm indicator will start flashing. After ALARM ACK-key is pressed, indicator will show status of the alarm. Hold-type: Alarm ON Alarm OFF Indicator BLINK Indicator ON Indicator OFF ACK Non-hold type: No action will occur when ACK-key is pressed. ALM indicator depends on alarm status. or ACK F040.EPS Other Specifications Clock: With Calendar function Clock Accuracy: 00 ppm, however not including error due to turning ON / OFF power Panel Key Lock: By actual key Internal illumination: By using the internal reflection of VFD indicator All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00

5 Memory backup: Lithium battery to protect setting parameters. Life is approx. ten years (at room temperature, and for standard model) and is installed inside the recorder. If the battery runs down, it will be indicated on the front panel indicator. Insulation Resistance: Each terminal to ground terminal: more than 0M (measured at 500VDC). Dielectric Strength: Power supply to ground terminal: 500V AC (50 / 60Hz), min Contact output terminal to ground: 500V AC (50 / 60Hz), min Measuring input terminal to ground: 000V AC (50 / 60Hz), min Between measuring input terminals: 000V AC (50 / 60Hz), min (except for RTD, since b-terminal is common). Between remote control terminal to ground: 500V DC, min. Machine noise: Machine Noise Information Ordinance 3. GSGV, Jan. 8, 99: The maximum sound pressure level is equal or less than 60dB (A) according to ISO7779. CSA CSA. No00.(NRTL/C*) installation category II, pollution degree * For marking that includes NRTL, a mark with US (USA) printed on the right side of the CSA mark, and C (Canada) printed on the left side appears on this instrument. CE EMC directive: EN636 compliance (Emission: Class A, Immunity: Annex A) EN compliant EN compliant EN550 compliant, Class A Group Low voltage directive: EN600- compliant, measurement category II, pollution degree C-Tick AS/NZS 064 compliant, Class A Group Normal Operating Conditions Power voltage: 90 to 3, 80 to 50VAC Power frequency: 50Hz ± %, 60Hz ± % Ambient temperature: 0 to 50 C Ambient humidity: 0 to 80% RH (at 5 to 40 C) Vibration: 0 to 60Hz, less than 0.0G Shock: not permissible Magnetic field: less than 400A/m (DC and 50, 60Hz) 5 Noise: Normal Mode (50 / 60Hz) DCV Peak value including signal must be less than. times the measuring range. TC Peak value including signal must be less than. times the measuring thermal electromotive force. RTD less than 50mV. Common Mode (50 / 60Hz) less than 50VAC rms. for the whole range Maximum Differential Noise between Channels (50 / 60Hz) less than 50VAC rms for 6,, dot model less than 00VAC rms for 8, 4 dot model * In case of / N (3 leg RTD) is combined less than 00VAC rms for 6 dot model less than 00VAC rms for, 8, 4 dot model Operating Position: Frontwards: 0 Backwards: within 30 from horizontal Warm-up Time: Min 30 minutes after power has been turned ON. All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 8th Edition: Feb

6 6 Standard Performance Measuring and Recording Accuracy: (following specifications apply to operation of the recorder under standard operation conditions: temperature 3 ± C, humidity 55 ± 0%RH, power supply voltage 90 to 3V, 80 to 50V AC, power supply frequency 50/60Hz ± %, warmup time at least 30 minutes, other ambient conditions like vibration should not adversely affect the recording operation). Input DC V Range 0mV 60mV 00mV V 6V 0V Measuring (digital display) Measurement Accuracy ± (0.% of rdg+3 digits) ± (0.% of rdg+ digits) ± (0.% of rdg+ digits) ± (0.% of rdg+ digits) ± (0.3% of rdg+ digits) ± (0.3% of rdg+ digits) Max. Resolution 0 µv 0 µv 00 µv mv mv 0mV Recording (analog) Recording Accuracy Resolution Measurement accuracy ± (0.3% of recording span) Pen model dead band: 0.% of recording span Dot printing model resolution: 0.mm TC R S B K E J T N ± (0.5% of rdg+ C) but R, S : 0 to 00 C, ± 3.7 C 00 to 300 C, ±.5 C B : 400 to 600 C, ± C accuracy less than 400 C is not specified ± (0.5% of rdg+0.7 C) but 00 to 00 C ± (0.5% of rdg+ C) ± (0.5% of rdg+0.5 C) ± (0.5% of rdg+0.5 C) but J : 00 to 00 C ± (0.5% of rdg+0.7 C) ± (0.5% of rdg+0.7 C) 0. C 0. C Measurement accuracy ± (0.3% of recording span) Pen model dead band: 0.% of recording span Dot printing model resolution: 0.mm W ± (0.5% of rdg+ C) 0. C L U ± (0.5% of rdg+0.5 C) but L : 00 to 00 C ± (0.5% of rdg+0.7 C) 0. C RTD Pt00 JPt00 ± (0.5% of rdg+0.3 C) 0. C Measurement accuracy ± (0.3% of recording span) Pen model dead band: 0.% of recording span Dot printing model resolution: 0.mm NOTE: Recording span is 80 mm. Accuracy in case of scaling: accuracy during scaling (digits) = measuring accuracy (digits) multiplier + digits (rounded up) Where the multiplier = scaling span digits / recording span digits Example: DCV 6V range recording span :.000 to 5.000V scaling span : to.000 measuring accuracy = ± (0.3% 5V + digits) ± (0.05V (5 digits) + ) ± (7 digits) multiplier = 000 digits (0.000 to.000) / 4000 digits (.000 to 5.000V) = 0.5 Accuracy during scaling =7 digits = digits (rounded up) T060.EPS All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00

7 Maximum Allowable Input Voltage: Less than VDC ranges and TC ranges: ± 0VDC (cont.) 6V to 0VDC: ± 30VDC (cont.) Reference Junction Compensation: INT / EXT selectable (per channel) Reference Junction Compensation Accuracy (above 0 C): Type R, S, B, W: ± C Type K, J, E, T, N, L, U: ± 0.5 C Input Resistance: More than 0M (TC, 0mV, 60mV, 00mV, V range) Approx. M (6, 0V range). Input Source Resistance: DCV, TC input: less than k RTD input: less than 0 / wire (Resistance is wellbalanced between 3 wires) Input Bias Current: less than 0nA (however, when burnout is specified for TC:00nA). Maximum Common Mode Voltage: 50VAC rms (50 / 60Hz) Maximum Differential Noise between Channels: 50VAC rms (50 / 60Hz) for 6, dot model 00VAC rms (50 / 60Hz) for 8, 4 dot model * In case of / N (3 leg RTD) is combined 00VAC rms (50 / 60Hz) for 6 dot model 00VAC rms (50 / 60Hz) for, 8, 4 dot model Interference between Channels: 0dB (500, the deviation in the case that 30V is applied to another channel) Common Mode Rejection Ratio: 0dB (50/60Hz ± 0.%, 500 imbalance between terminal and ground) Normal Mode Rejection Ratio: 40dB (50 / 60Hz ± 0.%) Effect of Operating Conditions Effect of Ambient Temperature: Effect of ambient temperature variation of 0 C. Digital display:within ± (0.% of rdg+ digit) Recording: within Digital display ± 0.% of recording span (excluding RJC error) Effect of Power Supply: Effect of variation within 90 to 3V or 80 to 50VAC in rated power supply voltage: (50 or 60Hz is reference) Digital display: within ± digit Recording: within ± 0.% of recording span Effect of rated power frequency variation of ± Hz (00VAC is reference): Digital display: within ± (0.% of rdg+ digit) Recording: same as digital display 7 Effect of Magnetic Field: Effect of AC (50 / 60Hz) or DC 400AT/m field: Digital display: within ± (0.% of rdg+0 digits) Recording: less than ± 0.5% of recording span Effect of Radio-frequency Electromagnetic Field: Effect of MHz, 0V/m field (Pen model) Digital display: within ± (5% of range + digit) Recording: within ± (5% of range) (Dot model) Digital display: within ± (0% of range + digit) Recording: within ± (0% of range) Effect of Radio-frequency Common Mode: Effect of MHz, 0V Digital display: within ± (5% of range + digit) Recording: within ± (5% of range) Effect of Input Source Resistance: Effect of Input Source Resistance variation of +k : DCV range: Ranges less than V: within ± 0 µv Ranges more than 6V: within 0.% of rdg TC range: within ± 0 µv (However ± 00 µv when TC burnout protection is set) RTD range: Effect of 0 per wire (resistances of three wires must be equal): Digital display: within ± (0.% of rdg+ digit) Recording: within Digital display ± 0.% of recording span Effect of difference of three wires: Digital display: 0. C per 40 m (approx.) Effect of Operating Position: Digital display: within ± (0.% of rdg+ digit) (within 30 backwards) Recording: within Digital display ± 0.% of recording span (within 30 backwards) Vibration: Effect when sine-wave motion of frequency 0 to 60Hz and acceleration of 0.0G is applied to the instrument in the direction of three axes for two hours: Digital display: within ± (0.% of rdg+ digit) Recording: within Digital display ± 0.% of recording span Transport and Storage Conditions No malfunction will occur under these conditions, however when returning to normal operation conditions, calibration might be necessary. Temperature: 5 C to 60 C Humidity: 5 to 95% RH (no condensation) Vibration: 0 to 60Hz 0.5G Shock: less than 40G (inside packing) All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00

8 SPECIFICATIONS OF OPTIONAL FUNCTIONS / A: Alarm Output Relay ( contacts) / A: Alarm Output Relay (4 contacts) / A3: Alarm Output Relay (6 contacts) / A4: Alarm Output Relay ( contacts) / A5: Alarm Output Relay (4 contacts) When alarm occurs, output relay on rear terminal will be activated.. Output is AND / OR selectable.. Energize/ non-energize selectable (common for all relays). 3. Hold type/ non-hold type selectable (common for all relays). 4. Reflash relay: When alarms occurs, specific output relay point can reflash (can be assigned to 3 points max) 5. Relay contact rating: DC 50V / 0.A AC 50V / 3A 6. Type of relay output: NO-C-NC Note : Alarm ACK key: Non-Hold type: No effect when ALARM ACK-key is pressed (no effect on output relay). Hold type: When-ALARM ACK-key is pressed, the output relay will be reset. Non-hold-type: Alarm ON Alarm OFF Relay SET Relay RESET Hold-type: Alarm ON Alarm OFF Relay SET Relay RESET ACK (ex. ) ACK F080.EPS Hold-type: Alarm ON Alarm OFF Relay SET Relay RESET (ex. ) ACK 8 F080.EPS / C3: RS-4A Communication Interface By using this communication function, setting and control of data can be done by a host-computer. Data can also be output to the host-computer.. Synchronizing format: start-stop asynchronous transmission. Specifications: conform to EIA RS-4A standard 3. Communication principle: 4-wire half-duplex multi-drop connection (: N (N= to 6)) 4. Communication rate: 75, 50, 300, 600, 00, 400, 4800, 9600bps 5. Data length: 7 or 8 bit 6. Stop bit: or bit 7. Parity: Odd, even or none 8. Communication distance: Up to 500m 9. Communication mode: ASCII (control / setting / measured data) or Binary (measured data) / E: IC Memory Card Slot Saving and retrieving setting parameters / E: IC Memory Card Slot Specifications Memory Data : Setting data, measured data, calculated data and programmed parameter can be stored on a memory card. However, the retrieving and recording of math channels is not possible. Sample Mode : In writing : Free mode (sampling start manually) Trigger mode (sampling start by external trigger) In reading :Free mode Sample Rate : Pen model :Measurement interval (5ms)/ sec./ min./ min. Dot model :Measurement interval / min. / min. Memory Capacity : M byte, 5k byte All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 8th Edition: Feb

9 Data Length : 500 / 000 / 000 / 4000 / 8000 / 6000 / 3000 data / ch (measurement channel byte / data, math channel 4 byte / data) Trigger Conditions : External contact * (wire the relay output to the remote terminal in case alarm and chart-end detector is treated as trigger.) Pre - Trigger : 0 to 00%, in ten steps Output : Recording ; * Regardless the number of inputs, the same products have interchangeability. ex. µr800 6 dot model µr800 dot model µr000 pen model µr800 4 pen model µr800 pen model µr800 6 dot model * Retrieving data is according to the measurement interval of the recorder which plays back. * The recording interval of the dot model depends on the setting of the recorder which plays back. Battery Backup : Lithium battery (battery life about years / 5k, about year / M) / F: FAIL / Chart End Detection and Output If an error in the CPU board occurs, or when the chart reaches its end, output relay on the rear terminal will be activated. Besides, when the chart reaches its end, CHT indicator will be shown on the display. Relay contact rating: DC 50V / 0.A, AC 50V / 3A / H: Clamped Input Terminal Using clamped input terminals as input terminal. / H3: Non-glare Door Glass Provides non-reflective glass in the front door. / H5 : Portable Type Provides carrying handle and power code. / M: Mathematical Functions. General computation: ()General computation channel: Using measurement channels ()Types: Arithmetic functions (,,, ) SQR (square root) ABS (absolute value) LOG (y=log 0X) EXP (exponential) Relational computation (<, >,, ) Logical computation (AND, OR, XOR, NOT). However, between two channels only. (3)Constant 9. Statistical computation ()Types of statistics: MAX, MIN, AVE, SUM (Totalization) ()Recording: Digital printout (time depends on interval) only. Analog recording is not possible. / N: 3 Leg Isolated RTD Input A, B, b legs are of isolated input type. / P: 4VDC Power Supply Rated supply voltage: 4VDC Applicable supply voltage range:.6 to 6.4VDC Maximum power consumption: Approx. 50VA / R: Remote Control 5 are selectable from the below mentioned remote controls. Number of settings Signal Recording start / stop level Chart speed change level Message printout start* 5 trigger Manual printout start trigger Statistical computation start / stop* level Periodic printout start trigger Start saving of measured data to IC memory card* 3 trigger * Up to 5 messages can be set * / M option is necessary *3 / E option is necessary / L: French / German / English Display & Winter / Summer Time English, German or French display can be selected. Winter and summer time can be set. / N: Cu0, Cu5 RTD input Cu0 and Cu5 input become available instead of Pt00 and JPt00. If this option is specified, Pt00 and JPt00 input is not available. Cu0, Cu5 Measurement Range RTD Input Type Cu0(GE) : α = at 5 C Cu0(L&N) : α = at 5 C Cu0(WEED) : α = at 5 C Cu0(BAILEY) : Non-Linear Cu0 : α = at 0 C Cu0 : α = at 0 C Cu5 : α = at 0 C Measurement Range 00 to 300 C (38 to 57 F) T090.EPS All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 8th Edition: Feb

10 0 Measurement / Recording Accuracy Input Type Cu0(GE) : α = at 5 C Cu0(L&N) : α = at 5 C Cu0(WEED) : α = at 5 C Cu0(BAILEY) : Non-Linear Cu0 : α = at 0 C Cu0 : α = at 0 C Cu5 : α = at 0 C Measurement Accuracy ± (0.4% of rdg +.0 C) ± (0.3% of rdg C) Recording Accuracy Measurement Accuracy ± (0.3% of Recording span) T00.EPS /N3: Pt50, RTD, PR0-40, Platinel TC input Pt50, PR0-40 and Platinel input become available. These inputs can be used in combination with all other standard inputs. Pt50, PR0-40, Platinel Measurement Range Input Type Measurement Range TC RTD PR0-40 Platinel Pt50 0 to 900 C (3 to 55 F) 0 to 400 C (3 to 55 F) 00 to 600 C (38 to F) Measurement / Recording Accuracy T00.EPS PR0-40 Platinel Pt50 Input Type 0 to 450 C 450 to 750 C 750 to 00 C 00 to 900 C Measurement Accuracy Not specified ± (0.9% of rdg+3. C) ± (0.9% of rdg+.3 C) ± (0.9% of rdg+0.4 C) ± (0.5% of rdg+.3 C) ± (0.3% of rdg+0.6 C) Recording Accuracy Measurement Accuracy ± (0.3% of Recording span) T003.EPS / N5: Remote RJC Remote RJC function (compensating wire saving type) becomes available. * Measurement is possible only if the thermocouples of the reference channel (RJC channel) and the measurement channel are of the same type. * RJC channel must be smaller than the measurement channel. All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00

11 MODEL AND SUFFIX CODES Model Code Option Code / Description µr800 pen recorder µr800 pen recorder µr800 3 pen recorder µr800 4 pen recorder µr800 6 dot recorder µr800 dot recorder µr800 8 dot recorder µr800 4 dot recorder See option code table. *: only one of /A, /A, /A3, /A4, /A5 can be selected *: /F cannot be combined with /A5. In case of 6-dot model, /F cannot be combined with /A4. *3: /H cannot be combined with /N. *4: If /N is specified, Pt00 and JPt00 input is not available. *5: /H5 B: Power cord JIS st d D: Power cord UL st d F: Power cord VDE st d R: Power cord AS st d J: Power cord BS st d V: Power cord GB st d /H5 cannot be combined with /P. OPTION CODES Option Code / A / A / A3 / A4 / A5 / C3 / E / E / F / H / H3 / H5 / M / N / N / N3 / N5 / P / R / L Description Alarm output relay ( contacts) Alarm output relay (4 contacts) * Alarm output relay (6 contacts) Alarm output relay ( contacts) (dot printing model only) Alarm output relay (4 contacts) (, 8, 4 dot model only) RS-4A Interface IC Memory Card Slot with SET UP data read / write function IC Memory Card Slot with SET UP, measurement data read / write function FAIL / Chart end detection and output * Clamped input terminal * 3 Non-glare door glass Portable type * 5 Mathematical Computations Cu0, Cu5 RTD input * 4 3 leg RTD (dot printing model only) * 3 Pt50 RTD, PR0-40, Platinel TC input Remote RJC 4VDC power supply Remote controls (5 plugs) STANDARD ACCESSORIES Name pen pen 3 pen 4 pen 6,, 8, 4 dot Z-fold chart 6 color ribbon cassette Disposable felt-pen cartridge Plotter pen Mounting brackets Key (for key lock) Fuse (50V 800mA Timelag) (4VDC model : 50V 5A Timelag) Instruction Manual Reference sheet (Quick operation guide) Red Green Blue Violet Purple SPARES Name Z-fold chart 6 color ribbon cassette 6 color ribbon cassette (for TAIWAN) Disposable felt-pen cartridge Red Green Blue Violet Purple Plotter pen Mounting brackets Key (for key lock) Fuse (50V 800mA Timelag) Parts No. B9573AN B9906JA B9906JF* B990AM B990AN B990AP B990AQ B990AR B9900BX B9900HZ A5EF Order Q ty (units) 0 Fuse for 4VDC model (50V 5A Timelag) A53EF 3 pieces / unit Lubricating oil piece / unit B990AZ (for dot printing model) * In case of orders for spares for TAIWAN, please order this part No. Description chart / unit piece / unit piece / unit 3 pieces / unit 3 pieces / unit 3 pieces / unit 3 pieces / unit 3 pieces / unit piece / unit piece / unit 4 pieces / unit OPTIONAL ACCESSORIES Name Shunt resistor (for screw input terminal) Shunt resistor (for clamped input terminal) IC Memory Card Model Code Specification 50Ω ± 0.% 00Ω ± 0.% 0Ω ± 0.% 50Ω ± 0.% 00Ω ± 0.% 0Ω ± 0.% 5k byte M byte T0.EPS All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 8th Edition: Feb

12 REAR TERMINAL ARRANGEMENTS Input Terminals 4 Pen Screw Type /B +/A -/b CH CH CH3 CH4 6 Dot Screw Type 4 Pen Clamped Type (/H) /b +/A -/B CH CH CH3 CH4 CH5 CH6 CH CH4 CH /B CH3 +/A -/b 6 Dot Clamped Type (/H) +/A -/B CH CH CH4 CH6 /b CH3 CH5 F0.EPS All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00

13 3 Option Terminals /A /C3 /F /R Combination /A4 /C3 /R Combination Alarm Output Relay 3 4 Alarm Output Relay Chart End Output 5 FAIL Output C SD SD A B SG RD RD A B FG Remote Control Communication (RS-4A) C SD SD A B SG RD RD A B FG Remote Control Communication (RS-4A) /A5 /A Alarm Output Relay F30.EPS All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00

14 4 DIMENSION Unit : mm (approx. inch) 79.6 (.0) (.56) 80 (7.09) 80.5 (7.) to 6 (panel thickness) 80 (7.09) 08 (4.5) 88 (.34) 94.6 (.6) 80.5 (7.) 4 (0.94) 0 (8.66) 39.5 (.56) 9.4 (0.37) (min. space for mounting) 79.6 (.0) (4.5) 54.6 (.5) 88 (.34) 94.6 (.6) 7.5 (0.30) (dimension after mounting) Note) The µr800 should be mounted by only two brackets, either on the top & bottom of the recorder, or on the left & right side of the recorder. If not specified, the tolerance is ±3%. However, in cases of less than 0mm, the tolerance is ±0.3mm. All Rights Reserved. Copyright 997, Yokogawa Electric Corporation GS 04H03B0-0E 7th Edition: Sep.30,00-00