Isolation Amplifier (electrically isolated input-output) ISO 6, ISO 4 and ISO 2. Instrumentation Amplifier (low drift) IA 6, IA 4, IA 2
|
|
|
- Nelson Hancock
- 6 years ago
- Views:
Transcription
1 Isolation Amplifier (electrically isolated input-output) ISO 6, ISO 4 and ISO 2 Instrumentation Amplifier (low drift) IA 6, IA 4, IA 2 Low Noise Amplifier LNA6, LNA4, LNA2 Square Wave Stimulator DST8 (Digitally Controlled Output) Electrocardiogram amplifier ECGA 1 Isolation Unit IU10A Tehnološki park 24, SI-1000 Ljubljana, Slovenia
2 Isolation Amplifier (electrically isolated input-output) ISO 6, ISO 4 and ISO 2 Isolated input - digitally modulated-demodulated barrier - barrier impedance: 1014 Ohm / 2 pf - leakage current at 240 Vrms: 0.18 Arms % test: 1500 V - no battery required Input - impedance: 1MOhm - input bias current: 50 pa - voltage range: +/- 12V - common-mode rejection: 100 db DC/AC switch Gain: 1, 2, 5, 10, 20 Low pass filter: - Bessel, 4 th order - 1, 3, 10, 30, 100 Hz (-3dB) - x 1 / x , 300, 1000, 3000, Hz (-3dB) - other options may be required Voltage offset - On/Off switch - coarse +/- 10 V - fine +/- 0.5 V Output - voltage range: +/- 12 V - current output: +/- 35 ma - resistance: 100 Ohm - short-circuit protected Power requirements: AC, Hz, 50 W, fuse T 0.6A or T0.3A (ISO6 and ISO4), 25 W, fuse T 0.3A or T0.1A (ISO2). Physical size: high quality metal 19 rack mounting; 134 x 487 x 236 mm, weight cca. 2.5kg (ISO6 and ISO4), 89 x 487 x 236 mm, weight cca. 2.0kg (ISO2). Tehnološki park 24, SI-1000 Ljubljana, Slovenia 2
3 Instrumentation Amplifier (low drift) IA 6, IA 4, IA 2 Input - Impedance: 1MOhm - Voltage range: +/- 12V - Equivalent input noise voltage: 10.3 nv/sqrt(hz) at 1kHz - Input offset voltage (typ.): 6 V - Temp. drift: 0.1 V/ C DC/AC switch Gain: 1, 2, 5, 10, 20 Low pass filter - Bessel, 4 th order - 1, 3, 10, 30, 100 Hz (-3dB) - x 1 / x , 300, 1000, 3000, Hz (-3dB) - other options may be required Voltage offset - On/Off switch - coarse +/- 10 V - fine +/- 0.5 V Output - voltage range: +/- 12 V - current output: +/- 35 ma - resistance: 100 Ohm - short-circuit protected Power requirements: AC, Hz, 50 W, fuse T 0.6A or T0.3A (IA6 and IA4), 25 W, fuse T 0.3A or T0.1A (IA2). Physical size: high quality metal 19 rack mounting; 134 x 487 x 236 mm, weight cca. 2.5kg (IA6 and IA4), 89 x 487 x 236 mm, weight cca. 2.0kg (IA2). Tehnološki park 24, SI-1000 Ljubljana, Slovenia 3
4 Low Noise Amplifier LNA6, LNA4, LNA2 Input - Impedance: 1MOhm - Voltage range: +/- 12V - Equivalent input noise voltage: 3.8 nv/sqrt(hz) at 1kHz - Input offset voltage (typ.): 25 V - Temp. drift: 0.6 V/ C DC/AC switch Gain: 1, 2, 5, 10, 20 Low pass filter - Bessel, 4 th order - 1, 3, 10, 30, 100 Hz (-3dB) - x 1 / x other options may be required Voltage offset - On/Off switch - coarse +/- 10 V - fine +/- 0.5 V Output - voltage range: +/- 12 V - current output: +/- 35 ma - resistance: 100 Ohm - short-circuit protected Power requirements: AC, Hz, 50 W, fuse T 0.6A or T0.3A (LNA6 and LNA4), 25 W, fuse T 0.3A or T0.1A (LNA2). Physical size: high quality metal 19 rack mounting; 134 x 487 x 236 mm, weight cca. 2.5kg (LNA6 and LNA4), 89 x 487 x 236 mm, weight cca. 2.0kg (LNA2). Tehnološki park 24, SI-1000 Ljubljana, Slovenia 4
5 Square Wave Stimulator DST8 (Digitally Controlled Output) Triggering - Repeated T.B.P. (time between pulses): linearly adjustable, multiplied by: 0.001, 0.01, 0.1, 1, 10 s (optional as required) - Single (manual trigger) - Gated (TTL compatible) - TTL down slope - TTL up slope - External, with adjustable trigger level: -10 to +10 linear adjustable in 3 decades (0.1, 1, 10 V) Delay - On/Off switch linear adjustable, multiplied by: 0.1, 1, 10, 100, 1000 ms (optional as required) - Control Error indication Width - Auto/Var. switch linearly adjustable, multiplied by: 0.001, 0.01, 0.1, 1, 10 s (optional as required) - Control Error indication Amplitude - Analogue/Digital switch - Analogue: 0-10 linearly adjustable, multiplied by: 0.001, 0.01, 0.1, 1 V. - Digital: , multiplied by: 0.001, 0.01, 0.1, 1 V. - TTL compatible DC Baseline - On/Off - -5 V...+5 V linear adjustable Twin Pulses switch Polarity: normal/reverse Pulse Shape: normal/reverse Pulses/DC switch Normal/Bipolar switch Stand By switch Optical Monitor Sync. Output Trigger Output Stimulus Output - Max. voltage range: Pulses +/- 10 V, DC Baseline +/- 5V - Max. current output: +/- 35 ma (optional as required) - Resistance: 50 Ohm - Short-circuit protected Isolation Unit connector (see specifications of Isolation Unit: Model IU10A) Power requirements: V AC or V AC, Hz, 50 W, fuse T 0.6A slow or T 0.3A slow Physical size: high quality metal 19 rack mounting; 89 x 487 x 236 mm, weight cca. 3.0kg Tehnološki park 24, SI-1000 Ljubljana, Slovenia 5
6 Electrocardiogram amplifier ECGA 1 PROBE: Input resistance: Input bias current: Stand-by: 2.5 GOhm / 2.5 pa +/-15 na on/off ISOLATION: Voltage rated continuous: AC (50 Hz) - min Vrms DC - min Vrms Isolation mode rejection: AC (50 Hz) db DC db Barrier impedance: 1014 Ohm / 2 pf Leakage current (240 Vrms, 50 Hz): 0.18 Arms ECG AMPLIFIER: Gain: , continuosly variable Input max. measurement range: mv Filter: band-pass, Butterworth type of the 2nd order frequency response (-3 db): Hz Notch filter: 50 Hz, Q = 6 (on/off) Output voltage (max): 10 V Output resistance: 1 kohm TRIGGER CHANNEL: TTL compatible pulse (width 40 ms) triggered by the maximal positive slope of the wave. POWER REQUIREMENTS: AC, Hz, 25 W, fuse T 0.3A or T0.1A. PHYSICAL SIZE: 45 x 220 x 250 mm, weight cca. 1.5kg Tehnološki park 24, SI-1000 Ljubljana, Slovenia 6
7 Isolation Unit IU10A Isolation - Digitally modulated-demodulated barrier - Barrier impedance: 1014 Ohm / 2 pf - Leakage current at 60 Hz, 240 Vrms: 0.18 Arms - Isolation mode rejection: 140 db - Continuous voltage: 1000 Vrms Gain - Nominal gain: 1 - Nonlinearity: 0.02 % max. Input - Voltage range: +/- 12 V - Resistance: 200 kohm Output - Voltage range: +/- 12V - Current drive: +/- 15 ma (optional as required) - Ripple voltage: 20 mvp-p Frequency response - Signal bandwidth: 50 khz - Slew rate: 2 V/ s Power requirements: no battery required Physical size: 45 x 25 x 80 mm, with 1.5m connecting cable, weight cca. 0.2 kg. Tehnološki park 24, SI-1000 Ljubljana, Slovenia 7
8 Tehnološki park 24, SI-1000 Ljubljana, Slovenia Tel (0) Fax: +386 (0) Ljubljana, January 2014.
Variable Gain 100 MHz Wideband Voltage Amplifier
Features 10 to 60 db, Switchable in 10 db Steps Bandwidth DC... 100 MHz, Switchable to 10 MHz Built-In Temperature Compensation for Low Drift of 0.6 µv/k 2.5 nv/ Hz Input Noise Switchable AC/DC-Coupling
AD9772A - Functional Block Diagram
F FEATURES single 3.0 V to 3.6 V supply 14-Bit DAC Resolution 160 MPS Input Data Rate 67.5 MHz Reconstruction Passband @ 160 MPS 74 dbc FDR @ 25 MHz 2 Interpolation Filter with High- or Low-Pass Response
Low-Cost, Internally Powered ISOLATION AMPLIFIER
Low-Cost, Internally Powered ISOLATION AMPLIFIER FEATURES SIGNAL AND POWER IN ONE DOUBLE-WIDE (.6") SIDE-BRAZED PACKAGE 56Vpk TEST VOLTAGE 15Vrms CONTINUOUS AC BARRIER RATING WIDE INPUT SIGNAL RANGE: V
OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE. ISO-STIM 01D STIMULUS ISOLATION UNIT ±100 V / ±10 ma, bipolar output
OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE ISO-STIM 01D STIMULUS ISOLATION UNIT ±100 V / ±10 ma, bipolar output VERSION 4.0 npi 2014 npi electronic GmbH, Bauhofring 16, D-71732 Tamm, Germany
High-Voltage, Internally Powered ISOLATION AMPLIFIER
ISO17 High-Voltage, Internally Powered ISOLATION AMPLIFIER FEATURES SIGNAL AND POWER IN ONE TRIPLE-WIDE PACKAGE 8Vpk TEST VOLTAGE 5Vrms CONTINUOUS AC BARRIER RATING WIDE INPUT SIGNAL RANGE: 1V to 1V WIDE
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
Signal Conditioning Amplifier
FEATURES Plug-in amplifier design; amplifiers are removable from the front panel without rear access Constant-voltage or constant-current excitation; 0.5 to 15 V or 0.5 to 30 ma; selectable by single internal
Stimulus Isolator model IS4
Stimulus Isolator model IS4 Stimulator Basics / Theory of Operation The IS4 Stimulator is a user controllable current source. Direct current can be generated over a range of several decades (from a few
Low Noise Variable Gain Low Frequency Voltage Amplifier
Features Variable Gain 40 to 100 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 100 Ω Very Low Input Voltage Noise: 700 pv/ Hz DC-Coupled, Single
DIN SERIES DIGITAL PANEL METERS ELECTRO- NUMERICS, INC.
DIN SERIES DIGITAL PANEL METERS ELECTRO- NUMERICS, INC. MODEL SELECTION GUIDE The DIN Series of Digital Panel Meters are rugged low cost meters for the measurement of dc voltage, dc current, Process voltage
easypll UHV Preamplifier Reference Manual
easypll UHV Preamplifier Reference Manual 1 Table of Contents easypll UHV-Pre-Amplifier for Tuning Fork 2 Theory... 2 Wiring of the pre-amplifier... 4 Technical specifications... 5 Version 1.1 BT 00536
Low-Cost, High-Voltage, Internally Powered OUTPUT ISOLATION AMPLIFIER
Low-Cost, High-Voltage, Internally Powered OUTPUT ISOLATION AMPLIFIER FEATURES SELF-CONTAINED ISOLATED SIGNAL AND OUTPUT POWER SMALL PACKAGE SIZE: Double-Wide (.6") Sidebraze DIP CONTINUOUS AC BARRIER
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
Special-Purpose Operational Amplifier Circuits
Special-Purpose Operational Amplifier Circuits Instrumentation Amplifier An instrumentation amplifier (IA) is a differential voltagegain device that amplifies the difference between the voltages existing
Pre-Amplifier SPA Series
Pre-Amplifier SPA Series External Pre-Amplifier for all A/D cards Low noise/high gain Allows to acquire smallest signals with high resolution 5 different versions 20 db to 60 db gain up to 2 GHz bandwidth
Dual operational amplifier
DESCRIPTION The 77 is a pair of high-performance monolithic operational amplifiers constructed on a single silicon chip. High common-mode voltage range and absence of latch-up make the 77 ideal for use
HP 8901B Modulation Analyzer. HP 11722A Sensor Module. 150 khz MHz. 100 khz MHz. Technical Specifications. Four Instruments In One
HP 8901B Modulation Analyzer 150 khz - 1300 MHz HP 11722A Sensor Module 100 khz - 2600 MHz Technical Specifications Four Instruments In One RF Power: ±0.02 db instrumentation accuracy RF Frequency: 10
TOE 7704 to TOE 7711 A
Synthesizers/function generators with sweep, trigger, AM and frequency counter Special features 1 mhz to 44 MHz Sweep, trigger, gate Variable symmetry Digital display of frequency, sweep, AC, DC Amplitude
Model 7000 Low Noise Differential Preamplifier
Model 7000 Low Noise Differential Preamplifier Operating Manual Service and Warranty Krohn-Hite Instruments are designed and manufactured in accordance with sound engineering practices and should give
6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable
99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using
Isolated, Unregulated DC/DC CONVERTERS
PWS75A PWS76A Isolated, Unregulated DC/DC CONVERTERS FEATURES ISOLATED ±7 TO ±8VDC OUTPUT FROM SINGLE 7 TO 8VDC SUPPLY ±ma OUTPUT AT RATED VOLTAGE ACCURACY HIGH ISOLATION VOLTAGE PWS75A, Vrms PWS76A, 35Vrms
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost high speed dual JFET input operational amplifiers with an internally trimmed input offset voltage
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost high speed dual JFET input operational amplifiers with an internally trimmed input offset voltage
Digital Multimeters R6451A/6452A. R6451A/6452A Digital Multimeters. 5 1/2 Digit DMM Series Enabling Dual Input and Display
5 1/2 Digit DMM Series Enabling Dual Input and Display R6451A/6452A R6451A: General-Purpose Low-Price DMM with Standard Functions R6452A: Full-Functional DMM with Dual- Channel Input and Dual Display (Photo
HP 34401A Specifications 8
8 HP 34401A Specifications 8 DC Characteristics DC Characteristics Accuracy Specifications ± ( % of reading + % of range ) [ 1 ] Function Range [ 3 ] Test Current or Burden Voltage 24 Hour [ 2 ] 23 C ±
Chapter 6 Specifications
Chapter 6 Specifications DC Characteristics Function Range [2] Test Current or Burden Voltage DC Voltage DC Current Resistance [6] 24 Hour [3] T CAL ±1 Accuracy Specifications: ± (% of reading + % of range)
Model 6517B Electrometer / High Resistance Meter Specifications
VOLTS Accuracy (1 Year) 1 / C 2V 10µV 0.025+4 0.003+2 20V 100µV 0.025+3 0.002+1 200V 1mV 0.06+3 0.002+1 NMRR: 2V and 20V range > 60dB, 200V range > 55dB. 50Hz or 60Hz 2 CMRR: >120dB at DC, 50Hz or 60Hz.
LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier
LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed
Variable-Gain High Speed Current Amplifier
Features Transimpedance (Gain) Switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper Cut-Off Frequency Switchable to 1 MHz, 10 MHz or Full Bandwidth Switchable AC/DC Coupling Adjustable
Signal Conditioning Amplifier
2300 System Micro-Measurements FEATURES Accepts all strain gage inputs (foil and piezoresistive), potentiometers, DCDT s, etc Selectable bridge excitation, 0.7 to 15 VDC (11 steps), plus 0.2 to 7 VDC continuously
DG5000 Series Specifications
DG5000 Series Specifications All the specifications can be guaranteed if the following two conditions are met unless where noted. The generator is within the calibration period and has performed self-calibration.
Precision INSTRUMENTATION AMPLIFIER
Precision INSTRUMENTATION AMPLIFIER FEATURES LOW OFFSET VOLTAGE: µv max LOW DRIFT:.µV/ C max LOW INPUT BIAS CURRENT: na max HIGH COMMON-MODE REJECTION: db min INPUT OVER-VOLTAGE PROTECTION: ±V WIDE SUPPLY
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
Model 34A. 3Hz to 2MHz 2-Channel Butterworth/Bessel HP, LP, BP, BR Plug-In Filter Card for Model 3905/3916 Chassis.
Model 34A 3Hz to 2MHz 2-Channel Butterworth/Bessel HP, LP, BP, BR Plug-In Filter Card for Model 3905/3916 Chassis Operating Manual Service and Warranty Krohn-Hite Instruments are designed and manufactured
Variable-Gain High Speed Current Amplifier
Features Transimpedance (gain) switchable from 1 x 10 2 to 1 x 10 8 V/A Bandwidth from DC up to 200 MHz Upper cut-off frequency switchable to 1 MHz, 10 MHz or full bandwidth Switchable AC/DC coupling Adjustable
Voltage-to-Frequency and Frequency-to-Voltage Converter ADVFC32
a FEATURES High Linearity 0.01% max at 10 khz FS 0.05% max at 100 khz FS 0.2% max at 500 khz FS Output TTL/CMOS Compatible V/F or F/V Conversion 6 Decade Dynamic Range Voltage or Current Input Reliable
Model 3102D 0-2 kv H.V. Power Supply
Features Compact single width NIM package Regulated up to ±2000 V dc. 1 ma output Noise and ripple 3 mv peak to peak Overload and short circuit protected Overload, inhibit and polarity status indicators
LF411 Low Offset, Low Drift JFET Input Operational Amplifier
Low Offset, Low Drift JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed input
DG4000. Series Function/Arbitrary Waveform Generator RIGOL TECHNOLOGIES, INC.
DG4000 Series Function/Arbitrary Waveform Generator Maximum output frequency: 200MHz, 160MHz, 100MHz, 60MHz 500MSa/s sample rate, 14 bit vertical resolution Dual channel outputs with identical performance
Lock-In-Amplifier Module
Features BNC Connectors for Input and Output Signals Rugged Aluminium Housing Single Phase Detection with X Output Working Frequency 5 Hz... 10 khz, Digital Phase Shifter 0... 360 Parameter Control by
Characteristics. Frequency (DG1022) Sine, Square, Ramp, Triangle, Pulse, Noise, Arb. ±50 ppm in 90 days ±100 ppm in 1year 18 C ~ 28 C.
Characteristics Frequency (DG1022) Waveforms Sine Square Ramp, Triangle Pulse Noise Arb Resolution Accuracy Temperature index Sine, Square, Ramp, Triangle, Pulse, Noise, Arb 1µHz ~ 20MHz 1µHz ~ 5MHz 1µHz
Quad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V max Offset Voltage V/ C max Offset Voltage Drift 5 pa max Input Bias Current.2 pa/ C typical I B Drift Low Noise.5 V p-p typical Noise,. Hz to Hz Low Power 6 A max Supply
ISOBE5600. Data sheet. Isolated Probe Systems. - ISOBE5600 Isolation system - ISOBE5600 Transient recorder. Features and Benefits
ISOBE5600 Isolated Probe Systems - ISOBE5600 Isolation system - ISOBE5600 Transient recorder Data sheet Features and Benefits ISOBE5600 Isolation system - Cost-effective - Fiber-optic isolation - Analogue-in
FREQUENCY SYNTHESIZERS, SIGNAL GENERATORS
SYNTHESIZED SIGNAL GENERATOR MG3641A/MG3642A 12 khz to 1040/2080 MHz NEW New Anritsu synthesizer technology permits frequency to be set with a resolution of 0.01 Hz across the full frequency range. And
DUAL OPAMP AND VOLTAGE REFERENCE General Description. Features. Applications
General Description The is a monolithic IC specifically designed to control the output current and voltage levels of switch mode battery chargers and power supplies. The device contains two operational
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
LF442 Dual Low Power JFET Input Operational Amplifier
LF442 Dual Low Power JFET Input Operational Amplifier General Description The LF442 dual low power operational amplifiers provide many of the same AC characteristics as the industry standard LM1458 while
NI DAQPad -6020E Family Specifications
NI DAQPad -6020E Family Specifications This document lists the I/O terminal summary and specifications for the NI DAQPad-6020E family of devices. This family includes the following devices: NI DAQPad-6020E
NI 6013/6014 Family Specifications
NI 6013/6014 Family Specifications This document lists the I/O terminal summary and specifications for the NI 6013/6014 family of devices. This family includes the following devices: NI PCI-6013 NI PCI-6014
Keysight 34401A Multimeter
Keysight 34401A Multimeter Data Sheet See Keysight's Truevolt Series of DMMs You also get both GPIB and RS-232 interfaces as standard features. Voltmeter Complete and External Trigger signals are provided
ASK Cards. Features Analog signal isolation Digital signal isolation. Applications
GHM Messtechnik GmbH Sales Center International Schloßstraße 6 88453 Erolzheim Germany Fon +49-7354-937233-0 Fax -88 www.ghm-messtechnik.de info@ghm-messtechnik.de Product Information Features System Sources
LF155/LF156/LF355/LF356/LF357 JFET Input Operational Amplifiers
JFET Input Operational Amplifiers General Description These are the first monolithic JFET input operational amplifiers to incorporate well matched, high voltage JFETs on the same chip with standard bipolar
Wide-band Models from DC to 100 MHz
CLAMP SENSOR Wide-band Models from DC to 1 MHz 3273-5 - 3276 CLAMP ON PROBES http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available
Ionization Chamber Controller with Integrated HV Supply
Ionization Chamber Controller with Integrated HV Supply Features Dynamic range
1-Port USB VNA - R60 Extended Specifications
TM 1- USB VNA - R60 Extended Specifications Patent US 9,291,657 - No test cable needed Frequency range: 1 MHz - 6 GHz Measurement time per point: 100 µs min typ. Automation programming in LabView, Python,
Module Input type Ranges TEDS Filters (LP = lowpass, HP = highpass) Piezoresistive bridge ±0.5 to mv/ma 1 ma exc
HSI Series Modules Selection Guide HSI Series Modules Single channel High bandwidth - for dynamic signals Isolation (all models Analog signal output (±5 V Single channel modularity For DEWETRON systems
LSK489. Linear Integrated Systems 4042 Clipper Court Fremont, CA Tel: Fax: Doc /09/17 Rev#A31 ECN# LSK489
Over Three Decades of Quality Through Innovation LSK489 LOW NOISE LOW CAPACITANCE MONOLITHIC DUAL N-CHANNEL JFET AMPLIFIER FEATURES ULTRA LOW NOISE LOW INPUT CAPACITANCE en = 1.8nV/ Hz Ciss = 4pF Features
Low Cost 100 g Single Axis Accelerometer with Analog Output ADXL190*
a FEATURES imems Single Chip IC Accelerometer 40 Milli-g Resolution Low Power ma 400 Hz Bandwidth +5.0 V Single Supply Operation 000 g Shock Survival APPLICATIONS Shock and Vibration Measurement Machine
Programmable Gain AMPLIFIER
PGA Programmable Gain AMPLIFIER FEATURES DIGITALLY PROGRAMABLE GAINS: G=,, V/V CMOS/TTL-COMPATIBLE INPUTS LOW GAIN ERROR: ±.5% max, G= LOW OFFSET VOLTAGE DRIFT: µv/ C LOW QUIESCENT CURRENT:.mA LOW COST
TL072 TL072A - TL072B
A - B LOW NOISE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORT-CIRCUIT PROTECTION
Multiple Instrument Station Module
Multiple Instrument Station Module Digital Storage Oscilloscope Vertical Channels Sampling rate Bandwidth Coupling Input impedance Vertical sensitivity Vertical resolution Max. input voltage Horizontal
Monolithic SAMPLE/HOLD AMPLIFIER
SHC9 SHC9A Monolithic SAMPLE/HOLD AMPLIFIER FEATURES -BIT THROUGHPUT ACCURACY LESS THAN µs ACQUISITION TIME WIDEBAND NOISE LESS THAN µvrms RELIABLE MONOLITHIC CONSTRUCTION Ω INPUT RESISTANCE TTL-CMOS-COMPATIBLE
Quad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V Max Offset Voltage V/ C Max Offset Voltage Drift 5 pa Max Input Bias Current.2 pa/ C Typical I B Drift Low Noise.5 V p-p Typical Noise,. Hz to Hz Low Power 6 A Max Supply
Specification for Radiated susceptibility Test
1 of 11 General Information on Radiated susceptibility test Supported frequency Range : 20MHz to 6GHz Supported Field strength : 30V/m at 3 meter distance 100V/m at 1 meter distance 2 of 11 Signal generator
DIGITAL LOCK-IN AMPLIFIER LI 5640/LI Advanced Functions Made Possible Only with Digital Systems, with DSP and by NF.
DIGITAL LOCK-IN AMPLIFIER LI 5640/LI 5630 Advanced Functions Made Possible Only with Digital Systems, with DSP and by NF NF Corporation Our Experience and Know-How Made Sure the Amplifier Was Packed with
Variable Gain Low Frequency Voltage Amplifier
Features Applications 20 to 80 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 1 kω Single Ended and True Differential Input Models Bandwidth DC -
LVA 4-Quadrant Amplifier 5000
LVA 4-Quadrant Amplifier 5 AUTOMOTIVE SUPPLY SIMULATION AT IT S BEST Example: LVA 1 Front panel Extremely low harmonic distortion - even under very non-linear load conditions Very fast slew rate > 2V/µs
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
Low Noise Variable Gain Low Frequency Voltage Amplifier
Features Variable Gain 40 to 100 db, Switchable in 20 db Steps Bipolar Input Stage, Recommended for Low Impedance Sources Smaller than 100 Ω Very Low Input Voltage Noise: 700 pv/ Hz DC-Coupled, Single
LOW NOISE / LOW DRIFT DIFFERENTIAL AMPLIFIER SP 1 004
Physics Basel Electronic Lab Klingelbergstr. 82 CH-4056 Basel Switzerland MICHAEL STEINACHER TEL: 0041 61 207 37 22 FAX: 0041 61 207 37 84 E-MAIL: MICHAEL.STEINACHER@UNIBAS.CH WEB: HTTP://WWW.PHYSIK.UNIBAS.CH
Function/Arbitrary Waveform Generator
Distributed By: Signal Test, Inc 1529 Santiago Ridge Way San Diego, CA 92154 Tel. 1-619-575-1577 USA www.signaltestinc.com Sales@SignalTestInc.com DG1000ZSeries Function/Arbitrary Waveform Generator SiFi
PIN CONFIGURATIONS FEATURES APPLICATION ORDERING INFORMATION. FE, N Packages
DESCRIPTION The are monolithic sample-and-hold circuits which utilize high-voltage ion-implant JFET technology to obtain ultra-high DC accuracy with fast acquisition of signal and low droop rate. Operating
DG5000 series Waveform Generators
DG5000 series Waveform Generators DG5000 is a multifunctional generator that combines many functions in one, including Function Generator, Arbitrary Waveform Generator, IQ Baseband /IQ IF, Frequency Hopping
Chapter 13 Specifications
RIGOL All the specifications can be guaranteed if the following two conditions are met unless where noted. The generator is within the calibration period and has performed self-calibration. The generator
Quad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V Max Offset Voltage V/ C Max Offset Voltage Drift 5 pa Max Input Bias Current.2 pa/ C Typical I B Drift Low Noise.5 V p-p Typical Noise,. Hz to Hz Low Power 6 A Max Supply
FSK DEMODULATOR / TONE DECODER
FSK DEMODULATOR / TONE DECODER GENERAL DESCRIPTION The is a monolithic phase-locked loop (PLL) system especially designed for data communications. It is particularly well suited for FSK modem applications,
LNS ultra low phase noise Synthesizer 8 MHz to 18 GHz
LNS ultra low phase noise Synthesizer 8 MHz to 18 GHz Datasheet The LNS is an easy to use 18 GHz synthesizer that exhibits outstanding phase noise and jitter performance in a 3U rack mountable chassis.
ML12561 Crystal Oscillator
ML56 Crystal Oscillator Legacy Device: Motorola MC56 The ML56 is the military temperature version of the commercial ML06 device. It is for use with an external crystal to form a crystal controlled oscillator.
Agilent 8902A Measuring Receiver
Agilent 8902A Measuring Receiver Technical Specifications Agilent 11722A Sensor Module Agilent 11792A Sensor Module Agilent 11793A Microwave Converter Agilent 11812A Verification Kit The Agilent Technologies
HA-2600, HA Features. 12MHz, High Input Impedance Operational Amplifiers. Applications. Pinouts. Ordering Information
HA26, HA26 September 998 File Number 292.3 2MHz, High Input Impedance Operational Amplifiers HA26/26 are internally compensated bipolar operational amplifiers that feature very high input impedance (MΩ,
FM2400RTIM COMTECH TECHNOLOGY CO., LTD. 1. GENERAL SPECIFICATION. 2. STANDARD TEST CONDITION test for electrical specification shall be
1. GENERAL SPECIFICATION 1-1 Input Frequency Range 1-3 One Input Connector 1-4 Nominal Input Impedance 1-5 Tuning Circuit 1-6 IF Frequency 1-7 IF Bandwidth 1-8 Demodulation 1-9 Video Output Polarity 1-10
LV3-8 for imc CRONOS-PL/-SL/compact
datasheet version 3.4 8-channel Differential Amplifier CRPL/LV3-8 CRC/LV3-8 The LV3-8, available as a plug-in module for imc CRONOS-PL/compact or as configuration module for CRONOS-SL, is an 8-channel
LF444 Quad Low Power JFET Input Operational Amplifier
LF444 Quad Low Power JFET Input Operational Amplifier General Description The LF444 quad low power operational amplifier provides many of the same AC characteristics as the industry standard LM148 while
APPENDIX E: IWX214 HARDWARE MANUAL
APPENDIX E: IWX214 HARDWARE MANUAL Overview The iworx/214 hardware in combination with LabScribe recording software provides a system that allows coordinated control of both analog inputs and outputs.
DM3100V2 Specifications
DM3100V2 Specifications Analog input Number of slots 8-channel model: 4 (amplifier units can be intermixed) 16-channel model: 8 (amplifier units can be intermixed) Logic input Number of slots: 1 8 channels/unit
Isolated, Frequency Input 5B45 / 5B46 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated, Frequency Input 5B45 / 5B46 FEATURES Isolated Frequency Input. Amplifies, Protects, Filters, and Isolates Analog Input. Generates an output of 0 to +5V proportional to input frequency. Model
LM148/LM248/LM348 Quad 741 Op Amps
Quad 741 Op Amps General Description The LM148 series is a true quad 741. It consists of four independent, high gain, internally compensated, low power operational amplifiers which have been designed to
EX1000 Series EX1000A EX1000A-TC EX1016A EX1032A EX1048A EX10SC EX1000A-TCDC RELIABLE DATA FIRST TIME EVERY TIME.
8 3-0 0 0 1-0 0 0 1 4 A EX1000 Series EX1000A EX1000A-TC EX1016A EX1032A EX1048A EX10SC EX1000A-TCDC * SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE www.vtiinstruments.com RELIABLE DATA FIRST TIME EVERY
LM231A/LM231/LM331A/LM331 Precision Voltage-to-Frequency Converters
LM231A/LM231/LM331A/LM331 Precision Voltage-to-Frequency Converters General Description The LM231/LM331 family of voltage-to-frequency converters are ideally suited for use in simple low-cost circuits
Model 310H Fast 800V Pulse Generator
KEY FEATURES Temperature Stability +/-5ppm 100 V to 800 V into 50 Ω
Dual Precision, Low Cost, High Speed BiFET Op Amp AD712-EP
Dual Precision, Low Cost, High Speed BiFET Op Amp FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +125 C) Controlled manufacturing baseline One
Function/Arbitrary Waveform Generator
DG1000ZSeries Function/Arbitrary Waveform Generator Innovative SiFi (Signal Fidelity): generate arb waveform point-by-point, restore signal distortionless, precisely adjustable sample rate and low jitter
DG4000 Series Waveform Generators
No.1 DG4000 DG4000 series is a multifunctional generator that combines many functions in one, including Function Generator, Arbitrary Waveform Generator, Pulse Generator, Harmonic Generator, Analog/Digital
Models 900CT & 900BT. Tunable Active Single Channel Certified Filter Instrument
Tunable Active Single Channel Certified Filter Instrument Description Frequency Devices instruments are single channel; 8-pole low-pass or high-pass, front panel tunable filter instruments. The controls
Analog Arts SG985 SG884 SG834 SG814 Product Specifications [1]
![Analog Arts SG985 SG884 SG834 SG814 Product Specifications [1]](/thumbs/94/122371203.jpg "Analog Arts SG985 SG884 SG834 SG814 Product Specifications [1]")
www.analogarts.com Analog Arts SG985 SG884 SG834 SG814 Product Specifications [1] 1. These models include: an oscilloscope, a spectrum analyzer, a data recorder, a frequency & phase meter, and an arbitrary
Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197
General Description The is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail single-supply operation, outstanding precision specifications, and a high gain bandwidth. This
Output Impedance. Duty Cycle Range. Buffer Size Resolution. PROTECTION Input Over Voltage. Output Short Circuit. TRIGGERING Sources.
3 Channel Digital Storage Oscilloscope (DSO) Instrument VERTICAL SPECIFICATIONS Analogue Bandwidth (-3dB) Bandwidth Limiting Rise time (10% to 90%, calculated) Input ranges (full scale) Input sensitivity
Ultra Low-Noise Variable Gain Low-Frequency Voltage Amplifier
Features Variable gain 40 to 100 db, switchable in 20 db steps Bipolar input stage, recommended for low impedance sources smaller than 50 Ω Ultra low input voltage noise: 400 pv/ Hz AC coupled, single
ES736 True RMS-to-DC Converters
Features True RMS-to-DC Conversion Fast settling time for all input levels Input level is specified up to 400mV RMS (Crest factor < 3 at 3V power) Averaging capacitor is typically 22uF Positive output