MODEL LEP100F-24 LEP100F-36 LEP100F-48 VOLTAGE[V] AC f or DC
|
|
- Frederica Armstrong
- 6 years ago
- Views:
Transcription
1 AC-DC Power Supplies Open Frame/ Enclosed Type 00F Ordering information 00 F -2 -O 2 3 R Recommended EMI/EMC Filter NAC High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. Series name 2Output wattage 3Universal input Output voltage Optional * *6 G :Low leakage current R :with Remote ON/OFF S :with Chassis SN:with Chassis & cover T :Vertical terminal block U :Operating stop voltage is set at a lower value Z :with ZT MODEL 00F-2 00F-36 00F- DC OUTPUT +2V.2(Peak 7)A +36V 2.(Peak.7)A +V 2.(Peak 3.)A SPECIFICATIONS MODEL 00F-2 00F-36 00F- VOLTAGE[V] AC - 26 f or DC CURRENT[A] ACIN 00V.typ (Io=00%) ACIN 200V 0.7typ (Io=00%) FREQUENCY[Hz] 0/60 (7-63) or DC ACIN 00V typ (Io=00%) 2typ (Io=00%) 3typ (Io=00%) EFFICIENCY[%] INPUT ACIN 200V typ (Io=00%) typ (Io=00%) typ (Io=00%) POWER FACTOR ACIN 00V 0.9typ (Io=00%) ACIN 200V 0.93typ (Io=00%) INRUSH CURRENT[A] ACIN 00V typ (Io=00%) (At cold start) (Ta=2C ) ACIN 200V 30typ (Io=00%) (At cold start) (Ta=2C) LEAKAGE CURRENT[mA] 0.7max (60Hz, According to IEC6090 and DEN-AN) VOLTAGE[V] CURRENT[A] * (Peak 7) 0-2. (Peak.7) 0-2. (Peak 3.) WATTAGE[W] 00. (Peak 6) 00. (Peak 69.2) 00. (Peak 6) LINE REGULATION[mV] max max max LOAD REGULATION[mV] 76max 90max 0max RIPPLE[mVp-p] 0 to +0C *3 20max 20max 0max -0-0C *3 60max 60max 300max OUTPUT 0 to +0C *3 0max 0max 20max RIPPLE NOISE[mVp-p] -0-0C *3 0max 0max 30max TEMPERATURE REGULATION[mV] 0 to +0C 20max 0max 20max -0 to +0C max 0max 300max DRIFT[mV] * max max max START-UP TIME[ms] 00max (ACIN 00V, Io=00%) HOLD-UP TIME[ms] 20typ (ACIN 00V, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION Works over 0% of peak current and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Works at - 0% of rating OTHERS REMOTE ON/OFF Option (Refer to Instruction Manual) INPUT-OUTPUT-RC * AC3,000V minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) ISOLATION INPUT-FG AC2,000V minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) OUTPUT-RC-FG * AC00V minute, Cutoff current = 00mA, DC00V 0MW min (At Room Temperature) OUTPUT-RC * AC00V minute, Cutoff current = 00mA, DC00V 0MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE -0 to +70C, 20-90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (0,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +7C, 20-90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 0 - Hz, 9.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 96.m/s2 (20G), ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL6090-, C-UL(CSA6090-), EN6090-, EN6006, EN07 Complies with DEN-AN and IEC6090- (At only AC input) NOISE CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN022-B, VCCI-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC *7 OTHERS CASE SIZE/WEIGHT 7X3X222mm [2.9X.3X.7 inches] (WXHXD) /30g max (with chassis & cover : 60g max) COOLING METHOD Convection * Specification is changed at option, refer to Instruction Manual 6. *2 Peak loading for 0sec. And Duty 3% max, refer to Instruction Manual. In detail. *3 This is the value that measured on measuring board with capacitor of 22mF within 0mm from output terminal.measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM0). * Drift is the change in DC output for an eight hour period after a half-hour warm-up at 2C, with the input voltage held constant at the rated input/output. -2 * Applicable when remote control (optional) is added. *6 Please contact us about safety approvals for the model with option. *7 Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with chassis and cover. * A sound may occur from power supply at peak loading.
2 00F External view 7 [2.9] [2.6] CN FG 3 Input(N) Input(L) Name plate C9 Voltage adjust -V +V (6) [2.6] 3-º3. [0.] 2-º. [0.] [.77] [0.79] [0.9] [.] CN [9.2] [0.3]. [0.] -M 2 [.6] [3.3] 32 [.26] 3max (Lead) (76) [6.93] [.3] 222 [.7] I / O Connector Mating Connector Terminal CN Chain: SVH-2T-P. B3P-VH VHR-N Loose: BVH-2T-P. Chain: SVH-2T-P. BP-VH VHR-N Loose: BVH-2T-P. Chain: SXH-00T-P0.6 B2B-XH-A XHP-2 Loose: BXH-00T-P0.6 Chain: SXH-00T-P0.6 B3B-XH-A XHP-3 Loose: BXH-00T-P0.6 (Mfr: J.S.T.) PCB t=.6 [0.06] CN Pin No. 2 3 Connector for Remote ON/OFF (option) º3.-.0 [0.-0.6] Connector for -Z (option) + COM - Input AC(L) AC(N) RC(-) RC(+) º. [0.] 2-M PIN CONNECTION Pin No. Output, 2, 3, -V, 6, 7, +V Pin No. Remote ON/OFF RC(+) 2 RC(-) 22 [9.92] [9.2] FG Pin No. -Z + 2 COM 3 - Keep drawing current per pin below A(7A at peak load)for [0.3]. [0.] 20 [0.79] [0.9] 6 [.] Weight: 30g max (with chassis & cover : 60g max) Tolerance: t [t0.0] Dimensions in mm, [ ]=inches PCB Material : CEM3 Chassis and cover is optional. torque:.n m(6kgf cm)max Performance data RISE TIME & FALL TIME (00F-2) EFFICIENCY (00F-2) 6 ACIN 00V Io=00% 2 DC Output 00ms/DIV AC Input 20ms/DIV EFFICIENCY 0 7 Load factor00% Load factor 0% INPUT VOLTAGE V INPUT HARMONIC CURRENT (00F-2) INPUT HARMONIC CURRENT (00F-2) Load factor 00% Input voltage AC 00V Load factor 00% Input voltage AC 230V
3 AC-DC Power Supplies Open Frame/ Enclosed Type 0F Ordering information 0 F -2 -O 2 3 R Recommended EMI/EMC Filter NAC High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. Series name 2Output wattage 3Universal input Output voltage Optional * *6 G :Low leakage current R :with Remote ON/OFF S :with Chassis SN:with Chassis & cover T :Vertical terminal block U :Operating stop voltage is set at a lower value Z :with ZT MODEL 0F-2 0F-36 0F- DC OUTPUT +2V 6.3(Peak 2)A +36V.2(Peak )A +V 3.2(Peak 6)A SPECIFICATIONS MODEL 0F-2 0F-36 0F- VOLTAGE[V] AC - 26 f or DC CURRENT[A] ACIN 00V 2.0typ (Io=00%) ACIN 200V.0typ (Io=00%) FREQUENCY[Hz] 0/60 (7-63) or DC ACIN 00V 2typ (Io=00%) 3typ (Io=00%) typ (Io=00%) EFFICIENCY[%] INPUT ACIN 200V typ (Io=00%) 6typ (Io=00%) 7typ (Io=00%) POWER FACTOR ACIN 00V 0.9typ (Io=00%) ACIN 200V 0.93typ (Io=00%) INRUSH CURRENT[A] ACIN 00V typ (Io=00%) (At cold start) (Ta=2C ) ACIN 200V 30typ (Io=00%) (At cold start) (Ta=2C) LEAKAGE CURRENT[mA] 0.7max (60Hz, According to IEC6090 and DEN-AN) VOLTAGE[V] CURRENT[A] * (Peak 2) (Peak ) (Peak 6) WATTAGE[W].2 (Peak 2).2 (Peak 2) 3.6 (Peak 2) LINE REGULATION[mV] max max max LOAD REGULATION[mV] 76max 90max 0max RIPPLE[mVp-p] 0 to +C *3 20max 20max 0max -0-0C *3 60max 60max 300max OUTPUT 0 to +C *3 0max 0max 20max RIPPLE NOISE[mVp-p] -0-0C *3 0max 0max 30max TEMPERATURE REGULATION[mV] 0 to +C 20max 0max 20max -0 to +C max 0max 300max DRIFT[mV] * max max max START-UP TIME[ms] 00max (ACIN 00V, Io=00%) HOLD-UP TIME[ms] 20typ (ACIN 00V, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION Works over 0% of peak current and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Works at - 0% of rating OTHERS REMOTE ON/OFF Option (Refer to Instruction Manual) INPUT-OUTPUT-RC * AC3,000V minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) ISOLATION INPUT-FG AC2,000V minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) OUTPUT-RC-FG * AC00V minute, Cutoff current = 00mA, DC00V 0MW min (At Room Temperature) OUTPUT-RC * AC00V minute, Cutoff current = 00mA, DC00V 0MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE -0 to +70C, 20-90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (0,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +7C, 20-90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 0 - Hz, 9.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 96.m/s2 (20G), ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL6090-, C-UL(CSA6090-), EN6090-, EN6006, EN07 Complies with DEN-AN and IEC6090- (At only AC input) NOISE CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN022-B, VCCI-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC *7 OTHERS CASE SIZE/WEIGHT X0X222mm [3.3X.7X.7 inches] (WXHXD) /90g max (with chassis & cover : 30g max) COOLING METHOD Convection * Specification is changed at option, refer to Instruction Manual 6. *2 Peak loading for 0sec. And Duty 3% max, refer to Instruction Manual. In detail. *3 This is the value that measured on measuring board with capacitor of 22mF within 0mm from output terminal.measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM0). * Drift is the change in DC output for an eight hour period after a half-hour warm-up at 2C, with the input voltage held constant at the rated input/output. - * Applicable when remote control (optional) is added. *6 Please contact us about safety approvals for the model with option. *7 Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with chassis and cover. * A sound may occur from power supply at peak loading.
4 0F External view [3.3] [2.9] 37 [.6] 3max (Lead) CN FG 3 Input(N) Input(L) Name plate [.3] (2) [.6] C [.3] 222 [.7] Voltage adjust I / O Connector Mating Connector Terminal CN Chain: SVH-2T-P. B3P-VH VHR-N Loose: BVH-2T-P. Chain: SVH-2T-P. BP-VH VHR-N Loose: BVH-2T-P. Chain: SXH-00T-P0.6 B2B-XH-A XHP-2 Loose: BXH-00T-P0.6 Chain: SXH-00T-P0.6 B3B-XH-A XHP-3 Loose: BXH-00T-P0.6 (Mfr: J.S.T.) -V +V PCB t=.6 [0.06] CN Pin No. 2 3 (6) [2.6] -º3. [0.] Input AC(L) AC(N) [2.6] [0.79] [.3] [.] + 2-º. [0.] Connector for Remote ON/OFF (option) º3.-.0 [0.-0.6] Connector for -Z (option) º. [0.] 2-M RC(-) + COM - RC(+) PIN CONNECTION Pin No. Output, 2, 3, -V, 6, 7, +V Pin No. Remote ON/OFF RC(+) 2 RC(-) FG Pin No. -Z + 2 COM 3 - Keep drawing current per pin below A(7A at peak load)for CN [9.2] [0.3] -M 22 [9.92] [9.2] [0.3] Weight: 90g max (with chassis & cover : 30g max) Tolerance: t [t0.0] Dimensions in mm, [ ]=inches PCB Material : CEM3 Chassis and cover is optional. torque:.n m(6kgf cm)max.. [0.] 7 [.] [0.] [0.9] 2 [0.9] 9 [3.7] [2.0] Performance data RISE TIME & FALL TIME (0F-2) EFFICIENCY (0F-2) ACIN 00V Io=00% 6 DC Output 00ms/DIV AC Input 20ms/DIV EFFICIENCY Load factor00% Load factor 0% INPUT VOLTAGE V INPUT HARMONIC CURRENT (0F-2) INPUT HARMONIC CURRENT (0F-2) Load factor 00% Input voltage AC 00V Load factor 00% Input voltage AC 230V
5 AC-DC Power Supplies Open Frame/ Enclosed Type 20F Ordering information 20 F -2 -O 2 3 R Recommended EMI/EMC Filter NAC High voltage pulse noise type : NAP series Low leakage current type : NAM series *The EMI/EMC Filter is recommended *to connect with several devices. Series name 2Output wattage 3Universal input Output voltage Optional * *6 G :Low leakage current R :with Remote ON/OFF S :with Chassis SN:with Chassis & cover T :Vertical terminal block U :Operating stop voltage is set at a lower value Z :with ZT MODEL 20F-2 20F-36 20F- DC OUTPUT +2V 0(Peak 20)A +36V 6.7(Peak 3.)A +V (Peak 0)A SPECIFICATIONS MODEL 20F-2 20F-36 20F- VOLTAGE[V] AC - 26 f or DC CURRENT[A] ACIN 00V 3.3typ (Io=00%) ACIN 200V.7typ (Io=00%) FREQUENCY[Hz] 0/60 (7-63) or DC ACIN 00V 3typ (Io=00%) typ (Io=00%) typ (Io=00%) EFFICIENCY[%] INPUT ACIN 200V 6typ (Io=00%) 7typ (Io=00%) 7typ (Io=00%) POWER FACTOR ACIN 00V 0.9typ (Io=00%) ACIN 200V 0.93typ (Io=00%) ACIN 00V typ (Io=00%) (More than 3sec.to re-start) INRUSH CURRENT[A] ACIN 200V 30typ (Io=00%) (More than 3sec.to re-start) LEAKAGE CURRENT[mA] 0.7max (60Hz, According to IEC6090 and DEN-AN) VOLTAGE[V] CURRENT[A] *2 0-0(Peak 20) (Peak 3.) 0-(Peak 0) WATTAGE[W] 20.0 (Peak 0) 2.2 (Peak 2.) 20.0 (Peak 0) LINE REGULATION[mV] max max max LOAD REGULATION[mV] 76max 90max 0max RIPPLE[mVp-p] 0 to +0C *3 20max 20max 0max -0-0C *3 60max 60max 300max OUTPUT 0 to +0C *3 0max 0max 20max RIPPLE NOISE[mVp-p] -0-0C *3 0max 0max 30max TEMPERATURE REGULATION[mV] 0 to +0C 20max 0max 20max -0 to +0C max 0max 300max DRIFT[mV] * max max max START-UP TIME[ms] 00max (ACIN 00V, Io=00%) HOLD-UP TIME[ms] 20typ (ACIN 00V, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] PROTECTION OVERCURRENT PROTECTION Works over 0% of peak current and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Works at - 0% of rating OTHERS REMOTE ON/OFF Option (Refer to Instruction Manual) INPUT-OUTPUT-RC * AC3,000V minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) ISOLATION INPUT-FG AC2,000V minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) OUTPUT-RC-FG * AC00V minute, Cutoff current = 00mA, DC00V 0MW min (At Room Temperature) OUTPUT-RC * AC00V minute, Cutoff current = 00mA, DC00V 0MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE -0 to +70C, 20-90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (0,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +7C, 20-90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION 0 - Hz, 9.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 96.m/s2 (20G), ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL6090-, C-UL(CSA6090-), EN6090-, EN6006, EN07 Complies with DEN-AN and IEC6090- (At only AC input) NOISE CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN022-B, VCCI-B REGULATIONS HARMONIC ATTENUATOR Complies with IEC *7 OTHERS CASE SIZE/WEIGHT 9XX222mm [3.7X.77X.7 inches] (WXHXD) /690g max (with chassis & cover :,070g max) COOLING METHOD Convection * Specification is changed at option, refer to Instruction Manual 6. *2 Peak loading for 0sec. And Duty 3% max, refer to Instruction Manual. In detail. *3 This is the value that measured on measuring board with capacitor of 22mF within 0mm from output terminal.measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM0). * Drift is the change in DC output for an eight hour period after a half-hour warm-up at 2C, with the input voltage held constant at the rated input/output. -6 * Applicable when remote control (optional) is added. *6 Please contact us about safety approvals for the model with option. *7 Please contact us about class C. * Parallel operation with other model is not possible. * Derating is required when operated with chassis and cover. * A sound may occur from power supply at peak loading.
6 20F External view 9 [3.7] [3.3] Name plate (23) [.39] CN FG 3 Input(N) C9 Input(L) Voltage adjust -V +V (66) [2.6] -º3. [0.] 2-º. [0.] [2.6] [0.9] [.77] [.3] CN [9.2] [0.3]. [0.] -M 2 [2.0] 0 [.2] 2 [.6] [.] (Lead) 3max [.3] 222 [.7] PCB t=.6 [0.06] I / O Connector Mating Connector Terminal CN Chain: SVH-2T-P. B3P-VH VHR-N Loose: BVH-2T-P. Chain: SVH-2T-P. BP-VH VHR-N Loose: BVH-2T-P. Chain: SXH-00T-P0.6 B2B-XH-A XHP-2 Loose: BXH-00T-P0.6 Chain: SXH-00T-P0.6 B3B-XH-A XHP-3 Loose: BXH-00T-P0.6 (Mfr: J.S.T.) CN Pin No. 2 3 Connector for Remote ON/OFF (option) º3.-.0 [0.-0.6] Connector for -Z (option) + COM - Input AC(L) AC(N) º. [0.] 2-M RC(-) RC(+) PIN CONNECTION Pin No. Output, 2, 3, -V, 6, 7, +V Pin No. Remote ON/OFF RC(+) 2 RC(-) 22 [9.92] [9.2] FG Pin No. -Z + 2 COM 3 - Keep drawing current per pin below A(7A at peak load)for [0.3]. [0.] [0.9] 30 [.] [2.2] Weight: 690g max (with chassis & cover :,070g max) Tolerance: t [t0.0] Dimensions in mm, [ ]=inches PCB Material : CEM3 Chassis and cover is optional. torque:.n m(6kgf cm)max Performance data RISE TIME & FALL TIME (20F-2) EFFICIENCY (20F-2) ACIN 00V Io=00% 6 DC Output 00ms/DIV AC Input 20ms/DIV EFFICIENCY 2 0 Load factor00% Load factor 0% INPUT VOLTAGE V INPUT HARMONIC CURRENT (20F-2) INPUT HARMONIC CURRENT (20F-2) Load factor 00% Input voltage AC 00V Load factor 00% Input voltage AC 230V
CURRENT1[A] CURRENT2[A]*
PBA/PBW AC-DC Power Supplies Enclosed Type PBW15F Ordering information PB W 15 F -O -O 1 2 3 4 5 6 R Recommended EMI/EMC Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current
More informationMODEL ADA600F-24 ADA600F-30 ADA600F-36 ADA600F-48 VOLTAGE[V] AC f or DC (AC64 or DC90 optionally available *6) FREQUENCY[Hz]
AC-DC Power Supplies Enclosed type 600F Ordering information 600 F -24 -O 1 2 3 4 5 R Please refer to derating curve, because the rated load depends on cooling method that is convection cooling or forced
More informationAD240 AD O AD-2 SPECIFICATIONS. AC-DC Power Supplies Enclosed type
AC-DC Power Supplies Enclosed type Ordering information - -O 1 2 3 4 1Series name 2Output wattage 3Output voltage 4Optional C :with Coating G :Low leakage current P :Parallel operation R :with Remote ON/OFF
More informationMODEL ADA600F-24 ADA600F-30 ADA600F-36 ADA600F-48 VOLTAGE[V] AC f or DC (AC64 or DC90 optionally available *6) FREQUENCY[Hz]
ADA R AC-DC Power Supplies Enclosed Type ADA600F Ordering information ADA 600 F -24 -O 1 2 3 4 5 Please refer to derating curve, because the rated load depends on cooling method that is convection cooling
More informationMODEL GHA300F-12 GHA300F-24 GHA300F-48 VOLTAGE[V] AC f (output derating is required at AC90V -115V *3) CURRENT[A]
AC-DC Power Supplies Medical Type GHA300F Ordering information GH A 300 F -OO -O 3 4 5 6 R Example recommended EMI/EMC filter EAC-0-47 High voltage pulse noise type : EAP series Low leakage current type
More informationMODEL GHA300F-12 GHA300F-24 GHA300F-48 VOLTAGE[V] AC f (output derating is required at AC90V -115V *3) CURRENT[A]
AC-DC Power Supplies Medical Type GHA300F Ordering information GH A 300 F -OO -O 3 4 5 6 R Example recommended EMI/EMC filter EAC-0-47 High voltage pulse noise type : EAP series Low leakage current type
More informationOperation Manual. SWF Series Switch Mode Power Supply. SANKEN ELECTRIC CO., LTD No.PAN E-01.
Operation Manual SWF Series Switch Mode Power Supply 1 Table of Contents Safety Precautions 3 Appearance and Meaning of Safety Warnings 4 Hazard and Caution Safety Warnings 4 Introduction to SWF Series
More informationFET A 2500 B A -OO -O
AC-DC Power Supplies Enclosed Type FETA2500BA Ordering information FET A 2500 B A -OO -O 1 2 3 4 5 6 7 Example recommended EMI/EMC filter AC-20-472 High voltage pulse noise type : AP series ow leakage
More information150 Watt Industrial (WLT)
150 Watt Industrial (WLT) Features 4 x 2 x 1.3 inches form factor 150 W with forced-air cooling Class 1 & Class 2 options 12 V @ 0.5 A fan voltage auxiliary output High efficiency > 86% Low conducted and
More informationJ SERIES JBW. Wide input, compact and device-embedded type
(/) Wide input, compact and device-embedded type J SERIES JBW UL/CSA, EN9 approved and Electric Appliances And Material Control Law compliant, CE marking product (-year warranty period) [FEATURES] Compact
More information60W 75W 80W 81.6W 81W 82.8W 81.9W 81.6W 81W
SPECIFICATION MODEL OUTPUT INPUT PROTECTION - - -0-4 -0 - -4-48 -4 DC VOLTAGE V V 0V 4V 0V V 4V 48V 4V CONSTANT CURRENT REGION Note.4 7. ~V 9 ~ V ~ 0V 4.4 ~ 4V 8 ~ 0V. ~ V. ~ 4V 8.8 ~ 48V.4 ~ 4V RATED
More informationBasic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current *1 [A] Inrush current protection PCB/Pattern Material Single sided Double sided Series/Parallel
More informationAC/DC Power Supply Single-Output
AC/DC Power Supply Single-Output The PFD-series is switcher designed to meet harmonic current distortion. The series has nominal 120 watts with a peak load of 240 watts during 10 seconds. The PFD is especially
More informationVMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
More information80W Single Output Switching Power Supply
SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE CONSTANT CURRENT REGION Note.4 RATED CURRENT RATED POWER RIPPLE & NOISE (max.) Note. 0mVp-p 0mVp-p 0mVp-p 0mVp-p
More information1. Output Power vs. Ambient temperature a. 3.3 and 5 V models b. All other models. Load factor Convection
VPU-S Series Switching Power Supply / Rev. 3-6 Features Universal input 8~64 Vac or ~34 Vdc Power factor correction Output over-current protected Output over-voltage protected Remote sense Remote on/off
More informationZWD100PAF. Conformity to RoHS Directive
SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
More informationZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)
MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationThe MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
More informationFor more information, please visit the product page. output. output current max (A)
date 12/12/217 page 1 of 1 SERIES: VMS-2 DESCRIPTION: AC-DC POWER SUPPLY FEATURES compact 2 x 4 high power-density design (CNF version is 2.4 x 4.6 ) universal input range efficiencies up to 93.5% 4th
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
More informationNLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
More informationPDAM500 Series 500W Power Supply
UL / IEC / EN 60601 3.1 Edition & UL / IEC / EN 60950 AM2 Safety Approvals High power density: 500W in 3 x 5 footprint Open Frame or Enclosed Versions Available Remote ON/OFF Function Built-in 12V/0.3A
More informationECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationPEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
More informationMetal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
More informationThis convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
More informationNLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
More informationThese medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices.
The MBC40 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 40 W of output power and a variety of single and multiple output voltages. The MBC
More information40W Multiple-Stage Output Current LED Power Supply E E E E E E E E E E E E E E E
SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI ENVIRMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY
More informationSample Test Data SWF Series SWF100P W, High Surge Tolerant, Low Noise Power Supply
Sample Test Data SWF Series SWF100P-24 100 W, High Surge Tolerant, Low Noise Power Supply General Description The SWF series are compact, wide ranging power supplies, providing peak power capability that
More informationThis product will be released from Feb.2006
High attenuation of common mode noise NAC series Ordering information NAC - -472 -O 2 4 Model Name 2Rated Current Line to ground capacitor code:see table.. This product will be released from Feb.6 table.
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More informationElectrical Specifications
300 Watt Industrial Features 3 x 5 x 1.5 inches Wide range AC input EMI Class B CE marked to LVD Class 1 & Class 2 options Input Voltage Input Frequency Electrical Specifications 90-264 VAC/120-390 VDC,
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
More informationSingle-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
More informationCompliance. Safety Approvals USA Canada Europe. Isolation: General. Dimensions. AC Input CN1 Output CN2 Optional CN3. Weight
IEC 1-1-2 4th Edition Compliant BF (Body Floating) Rated Class II Construction for Home Health Care Applications Class I With Functional Ground Connection 3 x 5 Footprint ua @ 264VAC Earth Leakage Current
More information40W Multiple-Stage Output Current LED Power Supply E E E E E E E E E E E E E E E
0W Multiple-Stage Output Current LED Power Supply LCM-0DA series SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI ENVIRMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME HOLD UP
More informationREVISIONS 06/26/06 YS TEMPS FILE NAME: CAD1:MSWORD:PA DOC SCALE: NONE REV: D SH 1 OF 7 TITLE: OVS-U (UNIVERSAL INPUT) SERIES SPECIFICATION
REVISIONS REV DESCRIPTION DATE ISSUED BY - ISSUE 1 / A REVISIED OPERATING TEMP ON PAGE 4. 07/02/02 RJ OVP FOR 48V ON PAGE 2. REMOTE ON/OFF ON PAGE 2. B CHANGED CN4 ON PAGE 5 07/12/02 RJ C CHANGED D (MODELS
More informationM A D 65 U S 12 B - PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 65 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 40 U S 12 B - Application Package Dimension Output Input Output Output Protection
More information125W Single Output with PFC Function
Jameco SKU Number: 2102465 125W Single Output with FC Function S-125 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE
More information40W Multiple-Stage Output Current LED Power Supply E E E E E E E E E E E E E E E
0W Multiple-Stage Output Current LED Power Supply LCM-0DA series SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI ENVIRMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME HOLD UP
More informationLCM-40DA/AUX Series 40W Multiple-Stage Constant Current LED Power Supply
Features Constant Current mode output with multiple levels selectable by dip switch Plastic housing with class II design Built-in active PFC function Standby Power consumption
More information3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The ABC41 Series of ultra low open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in a variety
More informationDR045 series IP65/IP67 IP65/67. General functions 45W Single Output LED Driver with PFC. Constant Voltage and Current Output
Constant Voltage and Current Output Universal AC Input of 100~305VAC Built-in Active PFC function Protections: Short Circuit/Over Voltage/Over Load Fixed Derating-Cutoff Type of Temperature Protection
More informationLFWLP W 12V 15.00A 25.00A 92%
WLP350 Series 350 Watts Low profile 1 5 x 3 footprint 200W / 350W Fan Up to 94% efficient Cover kits available EN55032 Level B conducted & radiated 5 Year warranty The LFWLP350 series of low profile, open
More information3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The MBC41 Series of ultra-low open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1. Automation Datacom IPC. Industry Measurement Telecom
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE TAD 65 U B - xx yy - Series Name Output Input Output Output Output Output Output Protection
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Din Rail Switching Power Supply 180 Watt with 18CFM FAN for 12V to 48V Output Voltage 150 Watt with 30CFM FAN for 5V Output Voltage High Efficiency up to 93% Universal Input: 90-264 VAC Low
More information5 x 3 x 0.75 Inches form factor. 275 Watts with Forced Air Cooling. Efficiencies up to 92% Standby Power < 0.5 W
The ABC275 Series of ultra low profile open frame power supplies feature a wide universal AC input range of 80 264 VAC, offering output power 275 W with 13 CFM forced air cooling, or up to 160 W with convection
More information420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
More informationSPECIFICATIONS (CONVECTION COOLING)
191-01-01/-B SPECIFICTIONS (CONVECTION COOLING) MODEL ZWQ130-5223/ ZWQ130-5225/ 1 Nominal Output Voltage V 5 12-12 3.3 5 12-12 5 2 Minimum Output Current (Convection) (*1) 1.5 0 0 0 1.5 0 0 0 3 Minimum
More informationVP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
More information60W Multiple-Stage Output Current LED Power Supply
SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT SAFETY STANDARDS DALI
More informationElectrical Specifications
POWER Data Sheet NLP65 Series Single, Dual and Triple Output Total Power: 65-75 W Input Voltage: 85-264 Vac 120-370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3 x 5 footprint
More informationETA-USA ETA-USA. The Power Professionals
ETAUSA The Professionals AOJS W AC/DC Features Inrush Current Limit Wide Input voltage range Universal input 100240V Over voltage protection Overcurrent protection 3 Yr warranty MODEL/CHANNEL OUTPUT Nominal
More informationCLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
More informationThese power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
More informationElectrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.
WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue
More information50W Single Output Switching Power Supply
W Single Output Switching Power Supply RS- s e ries SPECIFICATION MODEL RS--3.3 RS--5 RS-- RS--5 RS--4 RS--48 OUTPUT INPUT ENVIRONMENT SAFETY EMC (Note 6) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE
More informationDatasheet. Arrant-Light Oy. 60W DR Series
3.8.2015 Arrant-Light Oy Datasheet 60W DR Series DR060 Series 60W Single Output LED Driver Features: Constant current and voltage output Universal AC input 100~305VAC Built in active PFC function Output
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationAC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Remote ON/OFF Function 200 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Standby 5V@1A with Fan, @0.4A without
More informationMAD40 MULTI -OUTPUT SERIES OPP SCP OVP. 2 X 3.5 Inch AC-DC POWER SUPPLIES. UNIVERSAL INPUT RANGE UP TO 40Watts PART NUMBER STRUCTURE LOW CROSS REG.
MAD40 MULTI -OUTPUT SERIES 2 X 3.5 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 40Watts FEATURES 0.15 WATT LOW STANDBY POWER CONSUMPTION ULTRA LOW CROSS REGULATION UNDER 1.5 WIDE INPUT VOLTAGE
More informationLB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
More informationwww.tier1automation.com DIN Rail Power Supplies www.tier1automation.com Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered
More informationPower Supply PSU05-045
Power Supply PSU05-05 SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note ) OTHERS NOTE PSU05-05 DC VOLTAGE 5V RATED CURRENT 5A CURRENT RANGE 0~5A RATED POWER 5 RIPPLE & NOISE (max.)
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 30 U S 12 B - Application Package Dimension Output Input Output Output Protection
More information50W Multiple-Stage Constant Current Mode LED Driver. Current level selectable via DIP switch, please refer to DIP SWITCH TABLE section
SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI SAFETY & EMC OTHERS NOTE CURRENT LEVEL RATED POWER DC VOLTAGE RANGE OPEN CIRCUIT VOLTAGE (max.) CURRENT TOLERANCE SETUP TIME VOLTAGE RANGE Note. FREQUENCY
More informationThese medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
More informationJameco SKU Number:
Jameco SKU Number: 2104065 SE-1500 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED OWER VOLTAGE ADJ. RANGE LINE
More information70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL CIRCUIT TOPOLOGY...2
SNP-Z077 Specification Page 1 of 7 70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL...2 2. CIRCUIT TOPOLOGY...2 3. AC INPUT...2 3.1. INPUT VOLTAGE...2 3.2. INPUT
More information60W Multiple-Stage Output Current LED Power Supply
SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME 0W Multiple-Stage Output Current LED Power Supply RIPPLE & NOISE (max.) Note. NO OUTPUT VOLTAGE
More information3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)
FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W
More information60W Multiple-Stage Output Current LED Power Supply
SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME RIPPLE & NOISE (max.) Note. NO OUTPUT VOLTAGE (max.) Note.5 ms, ms / 0VAC at rated power HOLD UP
More informationSwitching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
More informationTB65 65W Single Output Test and Measurement/Industrial Series
Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db
More information40W Multiple-Stage Output Current LED Power Supply
SPECIFICATI MODEL OUTPUT INPUT PROTECTI SAFETY & EMC OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME SELECTABLE CURRENT Note. 0mA RIPPLE CURRENT RIPPLE & NOISE (max.) Note. mvp-p NO OUTPUT VOLTAGE
More information50W Multiple-Stage Constant Current Mode LED Driver LCM-60UDA series
~ AUX File Name:-SPEC 07--0 SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI OTHERS NOTE RATED POWER DC VOLTAGE RANGE OPEN CIRCUIT VOLTAGE (max.) SETUP TIME VOLTAGE RANGE Note. FREQUENCY RANGE POWER FACTOR
More informationSpecifications 2016-V AC-DC Switching Mode Power Supply NK-200 Series, 200W
2016-V1.0-1026 Specifications AC-DC Switching Mode Power Supply NK-200 Series, 200W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2016 AC-DC Switching
More informationSpecifications 2019-V AC-DC Switching Mode Power Supply NK-100 Series, 100W
2019-V1.0-0319 Specifications AC-DC Switching Mode Power Supply NK-100 Series, 100W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Switching
More information35W Multiple-Stage Constant Current Mode LED Driver LCM-40UDA series
~ AUX SPECIFICATI MODEL OUTPUT INPUT OTHERS NOTE LCM-0UDA- Current level selectable via DIP switch, please refer to DIP SWITCH TABLE section CURRENT LEVEL 50mA 500mA 600mA 700mA(default) 900mA 050mA RATED
More information1500W Single Output Power Supply
Jameco SKU Number: 2103353 1500W Single Output ower Supply SE-1500 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE
More informationABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single
More informationSPS20 Series small size isolated DC/DC converters
SPS20 Series small size isolated DC/DC converters Features High Efficiency Wide operating temperature range ( -20 C to +71 C ) Wide 2:1 input range Built in over current protection circuit Input Output
More informationSELV. 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
ID 2000000000 185W Single Output Switching Power Supply SELV series Features : Universal AC input I Full range (up to 305VAC) Built-in active PFC function High efficiency up to 94% Protections: Short circuit
More informationABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC120 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 120 W of output power in a compact footprint, with a variety of isolated single output voltages.
More informationElectrical Specifications
POWER Data Sheet NFS110 Medical Series Single and quad output Total Power: 80-110 W Input Voltage: 100-240Vac 127-357 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Medical,
More informationElectrical Specifications
Single & Quad output 1 of 5 Total Power: 80-110 W Input Voltage: 85-264 Vac 120-370 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and short circuit protection
More information40W Multiple-Stage Output Current LED Power Supply
0W Multiple-Stage Output Current LED Power Supply LCM-0 series SPECIFICATI MODEL OUTPUT INPUT PROTECTI SAFETY & EMC OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME LCM-0 SELECTABLE CURRENT Note.
More informationSF60/61P & SFU60/61P Series
Page: 1 of 7 The SF60/61P & SFU60/61P Series open frame switch mode power supply offers 50 - convection cooled output in a 3 x 5 size, with UL/CUL, IEC, and EN 60950-1, 2 nd Edition safety approvals. It
More informationMTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
More informationUP1301A-( )( ) SERIES
UP1301A-( )( ) SERIES 130 Watt Open Frame Switchers Small Size 3*5*1.2(inches) Universal Input to 264 VAC Low Power Consumption Overvoltage Protection Continuous Short Circuit Protection Over Temperature
More information