50W Single Output Switching Power Supply

Transcription

1 W Single Output Switching Power Supply RS- s e ries SPECIFICATION MODEL RS--3.3 RS--5 RS-- RS--5 RS--4 RS--48 OUTPUT INPUT ENVIRONMENT SAFETY EMC (Note 6) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD OVER VOLTAGE WORKING TEMP. SAFETY STANDARDS Note.4 Note.5 WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 3.3V 5V V 5V 4V 48V 0A 0A 4.A 3.4A.A.A 0 ~ 0A 0 ~ 0A 0 ~ 4.A 0 ~ 3.4A 0 ~.A 0 ~.A 33W W.4W 5W 5.8W 5.8W RIPPLE NOISE (max.) Note. mvp-p mvp-p 0mVp-p 0mVp-p 0mVp-p 00mVp-p VOLTAGE TOLERANCE Note.3 WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION RADIATION 3V ~ 3.6V 4.75 ~ 5.5V 0.8 ~ 3.V ~ 6.5V ~ 7.V 4 ~ 54V 3.0%.0%.0%.0%.0%.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%.0%.0% 0.5% 0.5% 0.5% 0.5% 0ms, 0ms/30VAC ms/30vac 00ms, 30ms/5VAC at full load 4ms/5VAC at full load 88 ~ 64VAC 5 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 47 ~ 63Hz 7%.3A/5VAC 0.8A/30VAC COLD START 33A/30VAC <ma / VAC 0 ~ % rated output power 78% 8% 83% 84% 86% Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 3.8 ~ 6.V 7.5 ~ 0.5V 7.6 ~ 3.4V Protection type : Hiccup mode, recovers automatically after fault condition is removed -5 ~ +70 (Refer to output load derating curve) 0 ~ 90% RH non-condensing - ~ +85, 0 ~ 95% RH 0.03%/ (0 ~ ) 0 ~ 0Hz, 5G 0min./cycle, period for min. each along X, Y, Z axes UL9-, TUV EN9- Approved Compliance to EN5 (CISPR) Class B I/P-O/P:3KVAC I/P-FG:.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:M Ohms/0VDC 55. ~ 64.8V HARMONIC CURRENT EMS IMMUNITY Compliance to EN-3-,-3 Compliance to EN-4-,3,4,5,6,8,; ENV04, EN-6- (EN08-) heavy industry level, criteria A MTBF 8Khrs min. MIL-HDBK-7F (5 ) DIMENSION 99*97*36mm (L*W*H) PACKING 0.4Kg; 45pcs/9.5Kg/0.9CUFT File Name:RS--SPEC

2 W Single Output Switching Power Supply RS- s e ries Mechanical Specification Case No. 905B Unit:mm M M Terminal Pin. No Assignment Pin No. Assignment Pin No. AC/L 4 AC/N 5 3 FG Assignment DC OUTPUT -V DC OUTPUT +V Output Derating Output Derating VS Input Voltage Ta= (VERTICAL) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) Hz File Name:RS--SPEC

3 W Single Output Switching Power Supply RS- s e ries SPECIFICATION MODEL RS--3.3 RS--5 RS-- RS--5 RS--4 RS--48 OUTPUT INPUT DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE NOISE (max.) Note. mvp-p mvp-p 0mVp-p 0mVp-p 0mVp-p 00mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT WORKING TEMP. WORKING HUMIDITY Note.4 Note.5 ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT OTHERS NOTE OVER LOAD OVER VOLTAGE VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 3.3V 5V V 5V 4V 48V 30A 6A.5A 0A 6.5A 3.3A 0 ~ 30A 0 ~ 6A 0 ~.5A 0 ~ 0A 0 ~ 6.5A 0 ~ 3.3A 99W 30W W W 56W 58.4W 3.V ~ V 4.75 ~ 5.5V.4 ~ 3.V 4.5 ~ 6.5V.8 ~ 6.4V 45.6 ~ 5.8V 3.0%.0%.0%.0%.0%.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%.0%.0% 0.5% 0.5% 0.5% 0.5% 0ms, 0ms/30VAC 8ms/30VAC 00ms, 30ms/5VAC at full load 0ms/5VAC at full load 88 ~ 3VAC / 76 ~ 64VAC selected by switch 48 ~ 373VDC(Withstand 300VAC surge for 5sec. Without damage) 47 ~ 63Hz 74% 3A/5VAC A/30VAC COLD START A/30VAC <ma / VAC 0 ~ % rated output power 78% 83% 84% 86% 87% Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 3.8 ~ 6.V 7.5 ~ 0.5V 7.6 ~ 3.4V 55. ~ 64.8V Protection type : Hiccup mode, recovers automatically after fault condition is removed -5 ~ +70 (Refer to output load derating curve) 0 ~ 90% RH non-condensing - ~ +85, 0 ~ 95% RH 0.03%/ (0 ~ ) 0 ~ 0Hz, 5G 0min./cycle, period for min. each along X, Y, Z axes UL9-, TUV EN9- Approved I/P-O/P:3KVAC I/P-FG:.5KVAC O/P-FG:0.5KVAC SAFETY ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:M Ohms/0VDC EMC EMI CONDUCTION RADIATION Compliance to EN5 (CISPR) Class B (Note 6) HARMONIC CURRENT EMS IMMUNITY Compliance to EN-3-,-3 Compliance to EN-4-,3,4,5,6,8,; ENV04, EN-6- (EN08-) heavy industry level, criteria A MTBF 44KHrs min. MIL-HDBK-7F (5 ) DIMENSION 99*98*38mm (L*W*H) PACKING 0.7Kg; 0pcs/5Kg/0.8CUFT File Name:RS--SPEC

4 W Single Output Switching Power Supply RS- s e ries Mechanical Specification Case No. 90A Unit:mm M M Terminal Pin. No Assignment Pin No. Assignment Pin No. AC/L 4,5 AC/N 6,7 3 FG Assignment DC OUTPUT -V DC OUTPUT +V Output Derating Static Characteristics Ta=5 Others V,5V (VERTICAL) (HORIZONTAL) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) Hz 3 64 File Name:RS--SPEC

5 W Single Output with PFC Function SP- s e ries SPECIFICATION MODEL OUTPUT INPUT FUNCTION ENVIRONMENT SAFETY EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER SP--5 SP--7.5 SP-- SP--5 SP--4 SP--30 SP--48 RIPPLE NOISE (max.) Note. mvp-p mvp-p mvp-p mvp-p mvp-p mvp-p mvp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVER VOLTAGE OVER TEMPERATURE FAN WORKING TEMP. WORKING HUMIDITY SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE HARMONIC CURRENT Note.5 STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION EMI CONDUCTION RADIATION EMS IMMUNITY MTBF DIMENSION PACKING 5V 7.5V V 5V 4V 30V 48V 45A 3A 0A 6A 0A 8A 5A 0 ~ 45A 0 ~ 3A 0 ~ 0A 0 ~ 6A 0 ~ 0A 0 ~ 8A 0 ~ 5A 5W W W W W W W 4 ~ 6V 6 ~ 9V 0 ~ 4V ~ 8V 0 ~ 8V 7 ~ 33V 4 ~ 56V.0%.0%.0%.0%.0%.0%.0% 0.5% 0.5% 0.3% 0.3% 0.% 0.% 0.%.0%.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0ms, ms/30vac 0ms/30VAC 0ms, ms/5vac at full load 0ms/5VAC at full load 88 ~ 64VAC 4 ~ 370VDC 47 ~ 63Hz PF>0.95/30VAC 79% 3.6A/5VAC 5A/5VAC <ma / VAC 83% PF>0.98/5VAC at full load.8a/30vac A/30VAC 05 ~ 35% rated output power 86% 86% 87% 88% 89% Protection type : Hiccup mode, recovers automatically after fault condition is removed 6.3 ~ 7.5V 9.4 ~ 0.9V 4.7 ~ 7.5V 9 ~.5V 9.5 ~ 35V 34.7 ~ 4V 57.6 ~ 67.V Protection type : Shut down o/p voltage, re-power on to recover 90 5 (5V,7.5V), 85 5 (V,5V,4V,30V,48V) (TSW : detect on heatsink of power transistor) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RTH FAN ON, 35 FAN OFF(Typ.) -0 ~ +70 (Refer to output load derating curve) 0 ~ 90% RH non-condensing - ~ +85, 0 ~ 95% RH 0.03%/ (0 ~ 0 ~ 0Hz, G 0min./cycle, min. each along X, Y, Z axes UL9-, TUV EN9- approved I/P-O/P:3KVAC I/P-FG:.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:M Ohms / 0VDC / 5 Compliance to EN5 (CISPR) Class B Compliance to EN-3-,-3 / 70% RH Compliance to EN-4-,3,4,5,6,8,; ENV04, EN54, light industry level, criteria A 84K hrs min. MIL-HDBK-7F (5 ) 90*93*mm (L*W*H) 0.8Kg; 8pcs/5.4Kg/.04CUFT File Name:SP--SPEC

6 W Single Output with PFC Function SP- s e ries USP-5 SP-30 s series Mechanical Specification Case No.987A Unit:mm M4 L= SO M3 L= Air flow direction 4max. 4-M4 L=6.5 5 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment AC/L 4,5 DC OUTPUT -V AC/N 6,7 DC OUTPUT +V 3 FG Block Diagram FAN ON/OFF FAN fosc : 90KHz I/P EMI FILTER PFC CIRCUIT POWER SWITCHING +V -V FILTER FG O.L.P. O.T.P. PWM PFC DETECTION CIRCUIT O.V.P. Derating Curve Static Characteristics Ta= (HORIZONTAL) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) Hz File Name:SP--SPEC

7 .. 4W Single Output with PFC Function SP-4 s e ries SPECIFICATION MODEL OUTPUT INPUT FUNCTION OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVER VOLTAGE Note.7 SP SP-4-5 SP-4- SP-4-5 SP-4-4 SP-4-48 (TSW) detect on heatsink of power transistor 90 (TSW) detect on heatsink of power diode OVER TEMPERATURE Note.4 Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE WORKING TEMP. TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING 3.3V 5V V 5V 4V 48V 85A 85A A 3A 0A 0A 0 ~ 85A 0 ~ 85A 0 ~ 43A 0 ~ 35A 0 ~ A 0 ~ A.5W Note.5.5W 45W 45W RIPPLE NOISE (max.) Note. mvp-p mvp-p 0mVp-p mvp-p mvp-p mvp-p VOLTAGE TOLERANCE Note.3 WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY SAFETY EMC (Note 6) PEAK LOAD(0min.) ISOLATION RESISTANCE EMI CONDUCTION RADIATION 4W 56W.9 ~ 3.6V 4.5 ~ 5.5V 0.8 ~ 3.V ~ 8V ~ 7.6V 4~ 56V ±.0% ±.0% ±.5% ±.5% ±.0% ±.0% ± 0.5% ± 0.5% ± 0.3% ± 0.3% ± 0.% ± 0.% ±.0% ±.0% ± 0.5% ± 0.5% ± 0.5% ± 0.5% 0ms, ms/30vac 8ms/30VAC 0ms, ms/5vac at full load 8ms/5VAC at full load 85 ~ 64VAC 0 ~ 370VDC 47 ~ 63Hz PF>0.95/30VAC PF>0.98/5VAC at full load 4W 55W 4W 58W 73% 79% 85% 85% 87% 89% 6.5A/5VAC 0A/5VAC <ma / VAC A/30VAC A/30VAC 87 ~ 03A 87 ~ 03A 45.5 ~ 58.05A ~ 47.5A 3. ~ 9.7A.55 ~ 4.85A Protection type : Constant current limiting, recovers automatically after conditions is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 3.8 ~ 6.V 8 ~ V 8.8 ~ 33.6V 57.6 ~ 67.V Protection type : Shut down o/p voltage, re-power on to recover RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 0V=power off -0 ~ + (Refer to output load derating curve) 0 ~ 90% RH non-condensing - ~ +85, 0 ~ 95% RH ± 0.03%/ (0 ~ ) 0 ~ 0Hz, G 0min./cycle, min. each along X, Y, Z axes UL9-, TUV EN9- approved Compliance to EN5 (CISPR) Class B Compliance to EN-3-,-3 Compliance to EN-4-,3,4,5,6,8,; ENV04, EN-6- (EN08-), light industry level, criteria A 0.5K hrs min. MIL-HDBK-7F (5 ) 78*7*43mm (L*W*H).7Kg; 6pcs/.3Kg/0.67CUFT I/P-O/P:3KVAC I/P-FG:.5KVAC O/P-FG:Short I/P-O/P, I/P-FG:M Ohms/0VDC 4W 58W File Name:SP-4-SPEC

8 4W Single Output with PFC Function SP-4 s e ries Mechanical Specification 6 3 Case No. 99A Unit:mm 3 CN ADJ max M Air flow direction 3 8-M4 L=6(Both Sides) Terminal Pin No. Assignment : Pin No. Assignment Pin No. Assignment AC/L 4~6 -V AC/N 7~9 +V 3 FG Connector P in No. Assignment (CN5) : HRS DF-6DP-DS or equivalent Pin No. 3 Assignment GND RC- -S Pin No Assignment N.C. RC+ +S Mating Housing HRS DF-6DS or equivalent Terminal HRS DF-**SC or equivalent Block Diagram fosc : KHz FAN I/P EMI FILTER ACTIVE INRUSH CURRENT LIMITING P.F.C. POWER SWITCH- ING +S +V FILTER -V (GND) -S FG O.L.P. O.T.P. PFC/PWM DETECTION CIRCUIT O.V.P. RC+ RC- Derating Curve Static Characteristics Ta= Others 3.3,5V Only (HORIZONTAL) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) Hz File Name:SP-4-SPEC

9 7W Single Output Power Supply SP-7 s e ries SPECIFICATION MODEL OUTPUT INPUT FUNCTION ENVIRONMENT OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVER VOLTAGE OVER TEMPERATURE POWER GOOD/FAIL REMOTE WORKING TEMP. Note.5 WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SP-7-5 5V 0A 0 ~ 0A 0W RIPPLE NOISE (max.) Note. 0mVp-p VOLTAGE TOLERANCE Note ~ 5.5V.0% 0.5%.0% 0ms, ms/30vac 6ms/30VAC 0ms, ms/5vac at full load 6ms/5VAC at full load 90 ~ 64VAC 7 ~ 370VDC 47 ~ 63Hz % 8.8A/5VAC 7A/5VAC <.0mA / VAC 4.A/30VAC 45A/30VAC 05 ~ 5% rated output power Protection type : Constant current limiting, unit will Hiccup after 3 sec ~ 6.75V 3.8 ~ 6.V 8 ~ V 7.6 ~ 3.4V 3 ~ 36.5V 57.6 ~ 67.V Protection type : Shut down o/p voltage, re-power on to recover 85 5 (TSW ) detect on heatsink of power transistor 85 5 (TSW ) detect on heatsink of power diode Protection type : Shut down o/p voltage, recovers automatically after temperature goes down ms/ms V 6.5A RC+/RC- short power on, open power off -0 ~ + (Refer to output load derating curve) 0~90% RH non-condensing - ~ +85, 0 ~ 95% RH 0.05%/ (0 ~ ) 0 ~ 6.5A 7W 0mVp-p 0 ~ V 5V A 0 ~ A 7W 0mVp-p ~ 6.5V POWER FACTOR (Typ.) PF>0.96/30VAC PF>0.99/5VAC at full load SAFETY STANDARDS EMS IMMUNITY SP-7- SP-7-5 SP-7-4 SP-7-7 SP %.0%.0%.0%.0% 0.3% 0.3% 0.% 0.% 0.% 0.5% 0.5% 0.5% 0.5% 0.5% 85% 87% 89% 89% 90% 0 ~ 0Hz, G 0min./cycle, min. each along X, Y, Z axes UL9-, TUV EN9- approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:.5KVAC O/P-FG:0.5KVAC SAFETY ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:M Ohms/0VDC EMC EMI CONDUCTION RADIATION Compliance to EN5 (CISPR), EN5 (CISPR) Class B (Note 4) HARMONIC CURRENT Compliance to EN-3-,-3 0mVp-p ~ 6.4V 0mVp-p 4 ~ 30V 0mVp-p 43 ~ 56V MTBF 4K hrs min. MIL-HDBK-7F (5 ) DIMENSION 78*7*6mm (L*W*H) PACKING.9Kg; 6pcs / 8.4Kg / 0.98CUFT 4V 3.3A 0 ~ 3.3A 75.W 7V 7.8A 0 ~ 7.8A 7.6W 48V 5.7A 0 ~ 5.7A 753.6W Compliance to EN-4-,3,4,5,6,8,, ENV04, EN54, EN-6-, EN604-3, heavy industry level, criteria A File Name:SP-7-SPEC

10 7W Single Output Power Supply SP-7 s e ries Mechanical Specification Case No.99A Unit:mm Air flow direction 0 7 I/P M3 4-M3 9 max. 0 max. 4-M O/P 5 8 max V ADJ M3 L=6 7 -M6 0 5 BOTTOM VIEW TOP VIEW AC Input Terminal Pin No. Assignment Pin No. Assignment 3 AC/L AC/N FG DC Output Terminal Pin No. Assignment Pin No. Assignment DC OUTPUT +V DC OUTPUT -V Control Pin No. Assignment : MOLEX 5559-NP uses 5558male crimp terminal Pin No. Assignment Pin No. Assignment Mating connector Terminal NC 5 NC MOLEX S 6 PF(Power fail signal) MOLEX 5557-NR Female crimp 3 G 7 +S Terminal receptacle 4 RC- 8 RC+ Block Diagram PFC fosc : KHz PWM fosc : KHz +S I/P EMI FILTER ACTIVE INRUSH CURRENT LIMITING PFC POWER SWITCHING PWM POWER SWITCHING +V FILTER -V DETECTION CIRCUIT O.L.P. O.T.P. CURRENT LIMIT -S PFC PWM DETECTION CIRCUIT PF O.V.P. O.T.P. REMOTE RC AUX POWER FAN FAN LOCK File Name:SP-7-SPEC

11 7W Single Output Power Supply SP-7 s e ries Derating Curve Static Characteristics (HORIZONTAL) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) Hz Control Terminal Instruction Manual Power Fail Signal PF Signal is the voltage difference between "G" and "PF" pin output Remote Sensing G PF RC+ +S PF NC RC+ +S PF NC RC- G -S NC RC- G -S NC -V +V -V +V LOAD LOAD - + -S - + Remote Control Power ON: RC+/RC- Short Power OFF: RC+/RC- open +S RC- RC+ RC+ +S PF NC RC- G -S NC -V +V LOAD - + File Name:SP-7-SPEC

12 0W Single Output Switching Power Supply LPV-0 series SPECIFICATION MODEL LPV-0-5 LPV-0- LPV-0-5 LPV-0-4 OUTPUT INPUT ENVIRONMENT SAFETY EMC OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY SAFETY STANDARDS HARMONIC CURRENT EMS IMMUNITY MTBF Note.6 Note.4 STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 5V V 5V 4V 3A.67A.33A 0.84A 0 ~ 3A 0 ~.67A 0 ~.33A 0 ~ 0.84A 5W 0W 0W 0.W RIPPLE NOISE (max.) Note. mvp-p 0mVp-p 0mVp-p mvp-p VOLTAGE TOLERANCE Note.3 WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION RADIATION 5.0%.0%.0% 0ms, 0ms / 30VAC 0ms, 0ms / 5VAC at full load ms/30vac 90 ~ 64VAC 7 ~ 370VDC 47 ~ 63Hz 77% 8% 83% 83% 0.55A/5VAC 0.35A/30VAC COLD START 35A/5VAC 0.5mA / VAC 0 ~ % rated output power 70A/30VAC Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 3.8 ~ 6V 7.5 ~ V 8 ~ 3V Protection type : Shut off o/p voltage, clamping by zener diode -30 ~ +70 (Refer to output load derating curve) 0 ~ 90% RH non-condensing - ~ +, 0 ~ 95% RH 0.03%/ (0 ~ ) 0 ~ 0Hz, G 0min./cycle, period for min. each along X, Y, Z axes UL879, UL30 Class, CAN/CSA C. No. 3-M9, IP67 approved ; design refer to TUV EN9-, EN I/P-O/P:3KVAC 6ms/5VAC at full load I/P-O/P:>M Ohms / 0VDC / 5 Compliance to EN5 (CISPR) Class B Compliance to EN-3- Class A, EN-3-3 Compliance to EN-4-,3,4,5,6,8,; ENV04, EN54, light industry level, criteria A 786.5Khrs min. MIL-HDBK-7F (5 ) / 70% RH LPS IP67 DIMENSION 8*35*6mm (L*W*H) PACKING 0.Kg; pcs/4.kg/0.6cuft File Name:LPV-0-SPEC 00--

13 0W Single Output Switching Power Supply LPV- 0 series Mechanical Specification Case No. 97A Unit:mm AC/N(Blue) AC/L(Brown) 8AWG AWG +V(Red) -V(Black) 6 Block Diagram fosc : 65KHz I/P EMI FILTER POWER SWITCHING FILTER +V -V O.L.P. PWM DETECTION CIRCUIT O.V.P. Derating Curve Static Characteristics Ta= AMBIENT TEMPERATURE ( ) (HORIZONTAL) INPUT VOLTAGE (V) Hz File Name:LPV-0-SPEC 00--

14 SPECIFICATION MODEL LPV--5 LPV-- LPV--5 LPV--4 LPV--36 LPV--48 OUTPUT INPUT ENVIRONMENT SAFETY EMC OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY SAFETY STANDARDS EMS IMMUNITY MTBF Note.6 STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION W Single Output Switching Power Supply 5V V 5V 4V 36V 48V 8A 5A 4A.5A.67A.5A 0 ~ 8A 0 ~ 5A 0 ~ 4A 0 ~.5A 0 ~.67A 0 ~.5A W W W W W W RIPPLE NOISE (max.) Note. mvp-p 0mVp-p 0mVp-p mvp-p mvp-p mvp-p VOLTAGE TOLERANCE Note.3 WITHSTAND VOLTAGE ISOLATION RESISTANCE 8.0%.0% 6.0% Note.4 90 ~ 64VAC 7 ~ 370VDC 47 ~ 63Hz 5.0%.0% 76% 83%.A/5VAC A/30VAC COLD START 30A/5VAC 0.5mA / VAC 0 ~ % rated output power A/30VAC 83% 86% 86% 86% Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 3.8 ~ 6.V 7.5 ~ 0.5V 7.6 ~ 3.4V 4.4 ~ 48.6V 55. ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to output load derating curve) 0 ~ 90% RH non-condensing - ~ +, 0 ~ 95% RH 0.03%/ (0 ~ ) 0 ~ 0Hz, G 0min./cycle, period for min. each along X, Y, Z axes UL30 Class (except for LPV--5), CAN/CSA C. No. 3-M9(except for LPV--5,LPV--48), IP67 approved ; design refer to TUV EN9-, EN I/P-O/P:3KVAC I/P-O/P:>M Ohms / 0VDC / 5 EMI CONDUCTION RADIATION Compliance to EN5 (CISPR) Class B HARMONIC CURRENT Compliance to EN-3- Class A, EN-3-3 / 70% RH Compliance to EN-4-,3,4,5,6,8,; ENV04, EN54, light industry level, criteria A 73Khrs min. MIL-HDBK-7F (5 ) LPV- series 0ms, 0ms / 30VAC 0ms, 0ms / 5VAC at full load (for 5~36V) ; 0ms, 30ms / 30VAC 0ms, 30ms / 5VAC at full load(for 48V) ms/30vac 6ms/5VAC at full load LPS IP67 DIMENSION 6.5*4.5*3mm (L*W*H) PACKING 0.4Kg; 3pcs/3.8Kg/0.56CUFT File Name:LPV--SPEC 00--

15 W Single Output Switching Power Supply LPV- series Mechanical Specification Case No. 976A Unit:mm AC/N(Blue) AC/L(Brown) 8AWG AWG +V(Red) -V(Black) 3 Block Diagram fosc : 65KHz I/P EMI FILTER POWER SWITCHING FILTER +V -V O.L.P. PWM DETECTION CIRCUIT O.V.P. Derating Curve Static Characteristics Ta=5 30VAC 90 5VAC (HORIZONTAL) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) Hz File Name:LPV--SPEC 00--

16 W Single Output Switching Power Supply LPV- series SPECIFICATION MODEL LPV--5 LPV-- LPV--5 LPV--4 LPV--36 LPV--48 OUTPUT INPUT ENVIRONMENT SAFETY EMC OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER CURRENT OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY SAFETY STANDARDS EMS IMMUNITY MTBF Note.6 000ms, 5ms / 30VAC Note.4 STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 5V V 5V 4V 36V 48V A 8.5A 6.7A 4.A.8A.A 0 ~ A 0 ~ 8.5A 0 ~ 6.7A 0 ~ 4.A 0 ~.8A 0 ~.A W 0W.5W.8W.8W.8W RIPPLE NOISE (max.) Note. mvp-p 0mVp-p 0mVp-p mvp-p mvp-p mvp-p VOLTAGE TOLERANCE Note.3 WITHSTAND VOLTAGE ISOLATION RESISTANCE 8.0%.0% 6.0% ms/30vac 90 ~ 64VAC 7 ~ 370VDC 47 ~ 63Hz 5.0%.0% 78% 84%.A/5VAC.A/30VAC COLD START 30A/5VAC 0.5mA / VAC A/30VAC 85% 86% 87% 88% 0 ~ % rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 3.8 ~ 6.V 7.5 ~ 0.5V 7.6 ~ 3.4V 4.4 ~ 48.6V 55. ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover -5 ~ +70 (Refer to output load derating curve) 0 ~ 90% RH non-condensing - ~ +, 0 ~ 95% RH 0.03%/ (0 ~ ) 0 ~ 0Hz, G 0min./cycle, period for min. each along X, Y, Z axes IP67 approved; Design refer to TUV EN9-, EN I/P-O/P:3KVAC I/P-O/P:>M Ohms / 0VDC / 5 EMI CONDUCTION RADIATION Compliance to EN5 (CISPR) Class B HARMONIC CURRENT Compliance to EN-3- Class A( % load), EN-3-3 Compliance to EN-4-,3,4,5,6,8,; ENV04, EN54, heavy industry level, criteria A 703Khrs min. MIL-HDBK-7F (5 ) 000ms, 5ms / 5VAC 4ms/5VAC at full load / 70% RH IP67 DIMENSION 90*5*37mm (L*W*H) PACKING 0.63Kg;0pcs/3.6Kg/0.57CUFT File Name:LPV--SPEC 00--4

17 W Single Output Switching Power Supply LPV- series Mechanical Specification Case No. 999A Unit:mm AC/N(Blue) AC/L(Brown) 8AWG AWG +V(Red) -V(Black) Block Diagram fosc : 65KHz I/P EMI FILTER POWER SWITCHING FILTER +V -V O.L.P. PWM DETECTION CIRCUIT O.V.P. Derating Curve Static Characteristics 5V,V Others (HORIZONTAL) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) Hz File Name:LPV--SPEC 00--4