FET A 2500 B A -OO -O
|
|
- Nathaniel Shields
- 5 years ago
- Views:
Transcription
1 AC-DC Power Supplies Enclosed Type FETA2500BA Ordering information FET A 2500 B A -OO -O Example recommended EMI/EMC filter AC High voltage pulse noise type : AP series ow leakage current type : AM series * A higher current rating EMI/EMC filter may be recommended in view of the other devices that could be connected in parallel with the power supply. 1 Series name 2 Single output 3 Output wattage 4 200/230V input 5 Version 6 Output voltage 7 Optional F2: everse air exhaust : with emote O/OFF Positive logic control *Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations. MODE FETA2500BA-36 FETA2500BA-48 MAX OUTPUT WATTAGE[W] * PUT 36V 55A 48V 52A SPECIFICATIOS MODE FETA2500BA-36 FETA2500BA-48 VOTAGE[V] AC f (Output derating is required at AC170V - 180V. efer to instruction manual 4.2) CUET[A] ACI 200V 11.3typ 13.8typ FEQUECY[Hz] 50 / 60 (47-63) 80typ (Io=10%) 83typ (Io=10%) IPUT EFFICIECY[%] ACI 230V 87typ (Io=20%) 89typ (Io=20%) 91typ (Io=50%) 92.5typ (Io=50%) 90typ (Io=100%) 91.5typ (Io=100%) POWE FACTO ACI 230V 0.98typ (Io=100%) IUSH CUET[A] ACI 200V *2 20max / 60max (Primary inrush current /Secondary inrush current) (More than 10 sec. to re-start) EAKAGE CUET[mA] 0.85max (ACI 240V 60Hz, Io=100%, According to IEC ) VOTAGE[V] CUET[A] ACI 170V-180V Output derating is required at ACI 180V or less (refer to instruction manual 4.2) ACI 180V-264V IE EGUATIO[mV] 144max 192max OAD EGUATIO[mV] 360max 480max IPPE[mVp-p] 0 to +50C *3 300max 360max -10 to 0C *3 360max 480max 0 to +50C *3 360max 480max IPPE OISE[mVp-p] OUTPUT -10 to 0C *3 480max 600max TEMPEATUE EGUATIO[mV] 0 to +50C 360max 480max -10 to +50C 440max 600max DIFT[mV] *4 144max 192max STAT-UP TIME[s] 1.7max (ACI 200V, Io=100%) HOD-UP TIME[ms] ACI 200V 10typ (Io=100%) 20typ (Io=50%) OUTPUT VOTAGE ADJUSTMET AGE[V] * *6 OUTPUT VOTAGE SETTIG[V] Activate over 105% - 120% of rated current and recovers automatically. OVECUET POTECTIO (Output voltage shuts down when the output voltage continuously drops due to overcurrent protection.) *7 POTECTIO OVEVOTAGE POTECTIO[V] * CICUIT AD DC_OK AMP ED (Green) OTHES AAM AMP ED (Amber) EMOTE O/OFF Provided IPUT-OUTPUT--C-W- AC3,000V 1minute, Cutoff current = 25mA, DC500V 50MW min (At room temperature) ISOATIO IPUT- AC2,000V 1minute, Cutoff current = 25mA, DC500V 50MW min (At room temperature) OUTPUT--C-W-- AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At room temperature) OUTPUT--C-W- AC100V 1minute, Cutoff current = 100mA, DC100V 50MW min (At room temperature) OPEATIG TEMP.,HUMID.AD ATITUDE -10 to +70C (Output derating is required), 20-90%H (on condensing), 3,000m (10,000 feet) max EVIOMET STOAGE TEMP.,HUMID.AD ATITUDE -20 to +85C, 20-90%H (on condensing), 9,000m (30,000 feet) max VIBATIO 10-55Hz, 19.6m/s 2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s 2 (20G), 11ms, once each along X, Y and Z axis SAFETY AD OISE EGUATIOS OTHES FETA-2 AGECY APPOVAS U , C-U (CSA ), E CODUCTED OISE Complies with FCC Part15-A, CISP22-A, E55011-A, E55022-A, VCCI-A HAMOIC ATTEUATO Complies with IEC Class A *8 CASE SIZE/WEIGHT *9 102X41X340mm [4.02X1.61X13.39 inches] (WXHXD) / 2.3kg max COOIG METHOD Forced cooling (internal fan) *1 output power is not included. *2 The current of input surge to a built-in noise filter (0.2ms or less) is excluded. *3 Measured by 500MHz oscilloscope. ipple and ripple noise is measured on measuring board with capacitor of 22mF within 150mm from the output terminal. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. *5 Can't be used above the rated output current and the rated output power. *6 When the output voltage is adjusted to higher than 49.92V and the load factor is over 70% of the rated current, if the load current changes quickly (< 200msec), the output voltage drops approximately 5V below the setting voltage. *7 Output voltage recovers from protection by shutting down the input voltage and waiting more than 10 seconds then turning on AC input again, or turning off the output voltage by remote control. *8 Please contact us about another class. *9 Case size contains neither the terminal blocks, connector and screw. * To meet the specifications, do not operate over-loaded condition. * A sound may occur from power supply at peak loading.
2 FETA2500BA Block diagram FUSE 250V 30A AC I V OISE FITE IUSH CUET IMIT VOTAGE SESIG IVETE CUET SESIG ECTIFIE AD FITE COTO VOTAGE SESIG SYCHOIZIG SIGA CUET SESIG IVETE THEMA POTECTIO ECTIFIE AD FITE THEMA POTECTIO OVE VOTAGE POTECTIO CUET SESIG MASTE SAVE COTO (VOTAGE BAACE) (CUET BAACE) TM (ADJUSTMET OF OUTPUT VOTAGE) COTO COTO C (EMOTE O / OFF) COTO AAM (POWE GOOD) ITEA EGUATO FA WAIG SIGA W (WAIG) External view (16) (12) [0.63] [0.47] 13 6 [0.24] 7.5 [0.30] 20 [0.79] ED(Alarm) Amber ED(DC OK) Green Output voltage adjustable potentiometer 44.5 [1.75] (10.5) 11 [0.41] 10.7 [0.42] 16.6 [0.65] M4 Output terminal(-) Output terminal(+) C1 C2 ( ) AC() AC() ame plate 13 [0.24] (13) (13) 3 3 [0.12] [0.12] 75.5 [2.97] [2.70] 2-f7 [0.28] ±0.5 [0.59] [11.34] (35) 340 [1.38] (17) [13.39] [0.67] (12.5) ame plate [0.49] [0.35] (f9.8) [0.39] 9 2-M4 19max [0.75] Input terminal cover 2-M4 2-M4 102 [4.02] 20 [0.79] 41 [1.61] AI FOW 47 [1.85] 3-M4 (Bottom) 235±0.5 [9.25] * Tolerance ±1 [±0.04] * Weight : 2.3kg max * P material / thickness : F-4 / 1.6mm [0.06] * Chassis material : Stainless steel * Dimensions in mm, [ ]=inches * Maunting torque : 1.2-m max * Screw tightening torque : 1.6-m max * Please connect safety ground to terminal on the unit ±0.5 [0.98] [10.43] 30± [1.18] [0.87] 60±0.5 [2.36] FETA-3
3 AC-DC Power Supplies Enclosed Type Ordering information FET A 7000 T -OO Example recommended EMI/EMC filter TAC Series name 2 Single output 3 Output wattage 4 Triple input phase 5 Output voltage * A higher current rating EMI/EMC filter may be recommended in view of the other devices that could be connected in parallel with the power supply. *Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations. MODE MAX OUTPUT WATTAGE[W] * PUT 48V 148.2A 144V 52A SPECIFICATIOS MODE VOTAGE[V] AC f (Output derating is required at AC170V - 180V. efer to instruction manual 4.2) CUET[A] ACI 200V 22.7typ 23.9typ FEQUECY[Hz] 50 / 60 (47-63) IPUT EFFICIECY[%] ACI 230V 90.5% (Io=100%) 90.5% (Io=100%) POWE FACTO ACI 230V 0.98typ (Io=100%) IUSH CUET[A] ACI 200V *2 30max / 60max (Primary inrush current /Secondary inrush current) (More than 10 sec. to re-start) EAKAGE CUET[mA] 3.0max (ACI 240V 60Hz, Io=100%, According to IEC ) VOTAGE[V] CUET[A] ACI 170V-180V Output derating is required at ACI 180V or less (refer to instruction manual 4.2) ACI 180V-264V IE EGUATIO[mV] 192max 360max OAD EGUATIO[mV] 960max 1800max IPPE[mVp-p] 0 to +40C *3 360max 720max -10 to 0C *3 480max 960max 0 to +40C *3 480max 960max IPPE OISE[mVp-p] OUTPUT -10 to 0C *3 600max 1200max TEMPEATUE EGUATIO[mV] 0 to +40C 480max 2200max -10 to +40C 600max 2800max DIFT[mV] *4 192max 384max STAT-UP TIME[s] 1.7max (ACI 200V, Io=100%) HOD-UP TIME[ms] ACI 200V 10typ (Io=100%) 20typ (Io=50%) OUTPUT VOTAGE ADJUSTMET AGE[V] * * *7 OUTPUT VOTAGE SETTIG[V] Works over 105% of rating (ecovers automatically, Hiccup overcurrent) OVECUET POTECTIO (Output voltage shuts down when the output voltage continuously drops due to overcurrent protection.) *8 POTECTIO OVEVOTAGE POTECTIO[V] * CICUIT AD DC_OK AMP ED (Green) OTHES AAM AMP ED (Amber) EMOTE O/OFF Provided IPUT-OUTPUT--C-W- AC3,000V 1minute, Cutoff current = 100mA, DC500V 50MW min (At room temperature) ISOATIO IPUT- AC2,000V 1minute, Cutoff current = 100mA, DC500V 50MW min (At room temperature) OUTPUT--C-W-- AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At room temperature) OUTPUT--C-W- AC100V 1minute, Cutoff current = 100mA, DC100V 50MW min (At room temperature) OPEATIG TEMP.,HUMID.AD ATITUDE -10 to +60C (Output derating is required), 20-90%H (on condensing), 3,000m (10,000 feet) max EVIOMET STOAGE TEMP.,HUMID.AD ATITUDE -20 to +75C, 20-90%H (on condensing), 9,000m (30,000 feet) max VIBATIO 10-55Hz, 19.6m/s 2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s 2 (20G), 11ms, once each along X, Y and Z axis SAFETY AD OISE EGUATIOS OTHES AGECY APPOVAS U , C-U (CSA ), E CODUCTED OISE Complies with FCC Part15-A, CISP32-A, E55011-A, E55032-A, VCCI-A HAMOIC ATTEUATO Complies with IEC CASE SIZE/WEIGHT *9 388X43X475mm [15.28X1.69X18.70 inches] (WXHXD) / 11kg max COOIG METHOD Forced cooling (internal fan) *1 output power is not included. *2 The current of input surge to a built-in noise filter (0.2ms or less) is excluded. *3 Measured by 500MHz oscilloscope. ipple and ripple noise is measured on measuring board with capacitor of 22mF within 150mm from the output terminal. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. *5 Can't be used above the rated output current and the rated output power. *6 When the output voltage is adjusted to higher than 49.92V and the load factor is over 70% of the rated current, if the load current changes quickly (< 200msec), the output voltage drops approximately 5V below the setting voltage. *7 When the output voltage is adjusted to higher than V and the load factor is over 70% of the rated current, if the load current changes quickly (<200msec), the output voltage drops approximately 15V below the setting voltage. *8 Output voltage recovers from protection by shutting down the input voltage and waiting more than 10 seconds then turning on AC input again, or turning off the output voltage by remote control. *9 Case size contains neither the terminal blocks, connector and screw. * To meet the specifications, do not operate over-loaded condition. * A sound may occur from power supply at peak loading. FETA-4
4 Block diagram -48 AC I 170~264V (3f) S T OISE FITE W C ITEA MODUE 1 TM C (EMOTE O / OFF) W C ITEA MODUE 2 TM COTO WAIG SIGA AAM MASTE SAVE COTO W (WAIG) (POWE GOOD) (VOTAGE BAACE) W C ITEA MODUE 3 TM TM (ADJUSTMET OF OUTPUT VOTAGE) (CUET BAACE) ITEA EGUATO -144 AC I 170~264V (3f) S T OISE FITE W C ITEA MODUE 1 TM C (EMOTE O / OFF) W C ITEA MODUE 2 TM COTO WAIG SIGA AAM MASTE SAVE COTO W (WAIG) (POWE GOOD) (VOTAGE BAACE) W C ITEA MODUE 3 TM TM (ADJUSTMET OF OUTPUT VOTAGE) (CUET BAACE) ITEA EGUATO FETA-5
5 Block diagram of internal module FUSE 250V 30A AC I V OISE FITE IUSH CUET IMIT VOTAGE SESIG IVETE CUET SESIG ECTIFIE AD FITE COTO VOTAGE SESIG SYCHOIZIG SIGA CUET SESIG IVETE THEMA POTECTIO ECTIFIE AD FITE THEMA POTECTIO OVE VOTAGE POTECTIO CUET SESIG MASTE SAVE COTO (VOTAGE BAACE) (CUET BAACE) TM (ADJUSTMET OF OUTPUT VOTAGE) COTO COTO C (EMOTE O / OFF) COTO AAM (POWE GOOD) ITEA EGUATO FA WAIG SIGA W (WAIG) External view ±0.5 [0.97] 11±0.5 6-M3 14 [0.55] 2-M3 -V 16 [0.63] +V ame plate Output voltage adjustable potentiometer ED(Alarm) Amber ED(DC OK) Green C1 C2 S T 11± [0.97] [1.93] [0.63] [0.63] [4.21] [0.63] 186 [7.32] 295 [11.61] 11± [0.63] 335 [13.19] [0.31] [14.65] 388 [15.28] ±0.5 [0.83] [13.62] Terminal cover 14 [0.55] 21max [0.83] [0.67] 14-M ± ± [5.22] [5.22] [0.98] 161± ±0.5 28± [6.34] [6.34] [1.10] [1.02] 127± ± ±0.5 [0.31] [5.00] [4.61] [5.04] 8 * Tolerance ±1 [±0.04] * Weight : 11kg max * P material / thickness : F-4 / 1.6mm [0.06] * Chassis material : Stainless steel * Dimensions in mm, [ ]=inches FETA-6 43 [1.69] 20±0.5 [0.79] 13.8 [0.54] * Screw tightening torque : M3 0.6-m max M4 1.2-m max M5 Input terminal 3.0-m max * Please connect safety ground to terminal on the unit [0.49] 244.5±0.5 [9.63] 444.5±0.5 [17.50] 475 [18.70] 6-M4 AI FOW
6 FETA-7
AD240 AD O AD-2 SPECIFICATIONS. AC-DC Power Supplies Enclosed type
AC-DC Power Supplies Enclosed type Ordering information - -O 1 2 3 4 1Series name 2Output wattage 3Output voltage 4Optional C :with Coating G :Low leakage current P :Parallel operation R :with Remote ON/OFF
More informationMODEL ADA600F-24 ADA600F-30 ADA600F-36 ADA600F-48 VOLTAGE[V] AC f or DC (AC64 or DC90 optionally available *6) FREQUENCY[Hz]
AC-DC Power Supplies Enclosed type 600F Ordering information 600 F -24 -O 1 2 3 4 5 R Please refer to derating curve, because the rated load depends on cooling method that is convection cooling or forced
More informationMODEL ADA600F-24 ADA600F-30 ADA600F-36 ADA600F-48 VOLTAGE[V] AC f or DC (AC64 or DC90 optionally available *6) FREQUENCY[Hz]
ADA R AC-DC Power Supplies Enclosed Type ADA600F Ordering information ADA 600 F -24 -O 1 2 3 4 5 Please refer to derating curve, because the rated load depends on cooling method that is convection cooling
More informationMODEL LEP100F-24 LEP100F-36 LEP100F-48 VOLTAGE[V] AC f or DC
AC-DC Power Supplies Open Frame/ Enclosed Type 00F Ordering information 00 F -2 -O 2 3 R Recommended EMI/EMC Filter NAC-06-72 High voltage pulse noise type : NAP series Low leakage current type : NAM series
More informationCURRENT1[A] CURRENT2[A]*
PBA/PBW AC-DC Power Supplies Enclosed Type PBW15F Ordering information PB W 15 F -O -O 1 2 3 4 5 6 R Recommended EMI/EMC Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current
More informationMODEL GHA300F-12 GHA300F-24 GHA300F-48 VOLTAGE[V] AC f (output derating is required at AC90V -115V *3) CURRENT[A]
AC-DC Power Supplies Medical Type GHA300F Ordering information GH A 300 F -OO -O 3 4 5 6 R Example recommended EMI/EMC filter EAC-0-47 High voltage pulse noise type : EAP series Low leakage current type
More informationMODEL GHA300F-12 GHA300F-24 GHA300F-48 VOLTAGE[V] AC f (output derating is required at AC90V -115V *3) CURRENT[A]
AC-DC Power Supplies Medical Type GHA300F Ordering information GH A 300 F -OO -O 3 4 5 6 R Example recommended EMI/EMC filter EAC-0-47 High voltage pulse noise type : EAP series Low leakage current type
More informationEnclosed Power Supplies
, 000 Watt Features Compact metal case with screw terminal block Dual and triple output models with isolated outputs Universal input VAC EMI/EMC compliance with E 000-- and E 000-- Compliance to E 000--
More informationAC/DC Power Supply Single-Output
AC/DC Power Supply Single-Output The PFD-series is switcher designed to meet harmonic current distortion. The series has nominal 120 watts with a peak load of 240 watts during 10 seconds. The PFD is especially
More informationREVISIONS 06/26/06 YS TEMPS FILE NAME: CAD1:MSWORD:PA DOC SCALE: NONE REV: D SH 1 OF 7 TITLE: OVS-U (UNIVERSAL INPUT) SERIES SPECIFICATION
REVISIONS REV DESCRIPTION DATE ISSUED BY - ISSUE 1 / A REVISIED OPERATING TEMP ON PAGE 4. 07/02/02 RJ OVP FOR 48V ON PAGE 2. REMOTE ON/OFF ON PAGE 2. B CHANGED CN4 ON PAGE 5 07/12/02 RJ C CHANGED D (MODELS
More information70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL CIRCUIT TOPOLOGY...2
SNP-Z077 Specification Page 1 of 7 70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL...2 2. CIRCUIT TOPOLOGY...2 3. AC INPUT...2 3.1. INPUT VOLTAGE...2 3.2. INPUT
More informationNMP series. 650W/1200W Modular Power
50W/00W Modular Power comprises two power wattage for the lineup, 50W and 00W, and the output modules deliver up to 40W with adjustable options for the major working voltages used in the industries 5V,
More informationTB65 65W Single Output Test and Measurement/Industrial Series
Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationMTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
More informationOutput Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, for DI-rail mounting Alternative side-mounting for flat panels High power factor by active power correction Very high efficiency up to 94.5%
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More information4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p
Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up
More information420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
More informationSwitching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
More informationPower Supply Unit (550W)
Contents Power Supply Unit (550W) Chapter 3.1 GENERAL DESCRIPTION...3.1-1 APPLIED VOLTAGE...3.1-2 INPUT CURRENT...3.1-2 DC OUTPUT...3.1-3 VOLTAGE DROPOUT...3.1-4 OUTPUT ISOLATION...3.1-4 OVERLOAD/UNDERLOAD
More informationOutput Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width Alternative side-mounting for flat panels Active Power Factor High efficiency up to 94% Back power immunity 150% peak current
More informationSingle-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
More informationSPECIFICATION SWITCHING POWER SUPPLY SINGLE POWER 250W BEST POWER SOLUTIONS, INC. 9F, NO.196-7, SEC.3, TA-TUNG RD SHI CHIH, TAIPEI, TAIWAN, R.O.C.
SPECIFICATION SWITCHING POWER SUPPLY BPS-250S 6-OUTPUT SINGLE POWER 250W BEST POWER SOLUTIONS, INC. 9F, NO.196-7, SEC.3, TA-TUNG RD SHI CHIH, TAIPEI, TAIWAN, R.O.C. Tel: 886-2-8647-1188 Fax: 886-2-8647-3322
More informationMetal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
More informationSPECIFICATION SWITCHING POWER SUPPLY BPS-300SP/2U 6-OUTPUT WITH ACTIVE PFC FUNCTION SINGLE POWER 300W BEST POWER SOLUTIONS, INC.
SPECIFICATION SWITCHING POWER SUPPLY BPS-300SP/2U 6-OUTPUT WITH ACTIVE PFC FUNCTION SINGLE POWER 300W BEST POWER SOLUTIONS, INC. 2F, NO.196-10, SEC.3, DA-TONG RD., XIZHI DIST., NEW TAIPEI CITY, TAIWAN
More informationThis convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
More informationIndustrial Serie +600S
D A T A S H E E T Industrial Serie +6S Modular Configurable Reduced fan noise Enhanced Line Derating 6 watts in the palm of your hand The +6S series fetures improved low input line derating delivers 6
More information1. Output Power vs. Ambient temperature a. 3.3 and 5 V models b. All other models. Load factor Convection
VPU-S Series Switching Power Supply / Rev. 3-6 Features Universal input 8~64 Vac or ~34 Vdc Power factor correction Output over-current protected Output over-voltage protected Remote sense Remote on/off
More informationBasic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] Input current *1 [A] Inrush current protection PCB/Pattern Material Single sided Double sided Series/Parallel
More informationSwitched mode power supply for DIN rail mounting type SMP23 DC24V/40A
Switched mode power supply for DIN rail mounting type SMP DC4V/40A Description Switched mode power supply (SMP) for rail mounting, three-phase supply voltage, high efficiency, integral input filter and
More informationVMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
More informationVP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
More informationPower Supplies 3. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs
More informationMedical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
More informationMB120S 120W Single Output Medical Series
Features 2 x 4 x 1.25 Package, Ideal for 1U Applications 10-year Life design with Premium E-Caps 100 Watts convection cooled Class B Conducted and Radiated EMI performance BF Isolation Type Rated Designed
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)
MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationST-250MAK-05E. Switching Power Supply SPECIFICATION
Switching Power Supply (SFX-12V) SPECIFICATION Revision: 1.0 SEVENTEAM ELECTRONICS CO., LTD. 2F, No.35, Lane 167, Sec.1,Tung Ho E. St, TAIPEI, TAIWAN TEL: 886-2-2882-9050 FAX: 886-2-2882-6230 1 ** Table
More informationREDUNDANT AC 300W POWER SUPPLY. Technical Specifications TD-AC-300W-MAX
REDUNDANT AC 300W Technical Specifications Model Number : Efficiency : >92% Power Factor : >0.99 Minimum Maximum AC Input Voltage 90V 265V Frequency 50Hz 60Hz Maximum Output Power 300W Output Minimum Maximum
More informationTC-600PD2. Switching Power Supply ( 600W PS2 ATX12V ) SPECIFICATION. Revision: 1.0
Switching Power Supply ( 600W PS2 ATX12V ) SPECIFICATION Revision: 1.0 727,. Phillips Drive City of Industry. CA 91748. USA http:// www.xeal.com.tw TEL: 626-303-8885 FAX: 626-301-0588 ** Table of Content
More informationFor more information, please visit the product page. output. output current max (A)
date 12/12/217 page 1 of 1 SERIES: VMS-2 DESCRIPTION: AC-DC POWER SUPPLY FEATURES compact 2 x 4 high power-density design (CNF version is 2.4 x 4.6 ) universal input range efficiencies up to 93.5% 4th
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationSample Test Data SWF Series SWF100P W, High Surge Tolerant, Low Noise Power Supply
Sample Test Data SWF Series SWF100P-24 100 W, High Surge Tolerant, Low Noise Power Supply General Description The SWF series are compact, wide ranging power supplies, providing peak power capability that
More informationSPECIFICATION. SilverStone OLYMPIA OP1000 Switching Power Supply Active PFC
SPECIFICATION SilverStone OLYMPIA OP1000 Switching Power Supply Active PFC SilverStone Technology Co., Ltd 18F~8 NO.738 Chung-Cheng Rd., Chung-Ho City, Taipei Hsien, Taiwan R.O.C. 235 TEL: 886-2-82278222
More informationThese power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
More information3000W Single Output Power Supply AK V 200A. 0 ~ 200A 3000W 150mVp-p
000W Single Output Power Supply AK-000 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 0% ) Programmable output Current ( 0% ~ 0% ) High efficiency up to % +V /
More information5 x 3 x 0.75 Inches form factor. 275 Watts with Forced Air Cooling. Efficiencies up to 92% Standby Power < 0.5 W
The ABC275 Series of ultra low profile open frame power supplies feature a wide universal AC input range of 80 264 VAC, offering output power 275 W with 13 CFM forced air cooling, or up to 160 W with convection
More informationSPECIFICATION REDUNDANT POWER SUPPLY HOT-SWAPPABLE 370W+370W
SPECIFICATION REDUNDANT POWER SUPPLY HOT-SWAPPABLE BPS-370RDX 6-OUTPUT 370W+370W 1.0 General 1.1 Parameter Specifications 2.0 Input Characteristics 2.1 Input Voltage 2.2 Input Waveform 2.3 Input Frequency
More information1500W Single Output Power Supply AK V 100A 0~100A 1500W. 150mVp-p. Adjustment of output current is between 40 ~ 105% of rated output
AK-0 Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to % +5V / 0.5A auxiliary output Intelligent LED indicators.5u
More informationLB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
More informationRSP-2000 Series 2000W Single Output Enclosed Power Supplies
RSP-000 Series 000W Single Output Enclosed Power Supplies Features Universal AC input / Full range Built-in active PFC function High efficiency up to 9% Forced air Cooling by built-in DC fan Output voltage
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More information3000W Single Output Power Supply AK V 24V 250A 200A 125A 0 ~ 250A 0 ~ 125A 3000W 0 ~ 200A. 3000W 150mVp-p 3000W
Single Output Power Supply AK-000 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 0% ) Programmable output Current ( % ~ 0% ) High efficiency up to % +V / 0.A auxiliary
More information11SP 4247 LCD TV Power specification Rev 1.3 Specification
Specification 6 Date: 2012. 08. 15 1. INTRODUCTION 1.1 Scope This approval is the description related to every electrical and structural specifications and reliability For Power Supply Unit used on 4247
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
More informationPEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
More informationSFD550-12BG Front-End Preliminary Data Sheet DC Input, 12V Output, 550 Watts
Applications Datacom Distributed power systems Server Features RoHS compliant for all six substances NEBS Level 3 compliant: GR-63, 78, 089 Wide DC input range (-40 to -75 VDC) U or 2U height configurations
More informationThis product will be released from Feb.2006
High attenuation of common mode noise NAC series Ordering information NAC - -472 -O 2 4 Model Name 2Rated Current Line to ground capacitor code:see table.. This product will be released from Feb.6 table.
More informationSPECIFICATION REDUNDANT POWER SUPPLY HOT-SWAPPABLE BPS-460RDX 6-OUTPUT 460W+460W BEST POWER SOLUTIONS, INC.
SPECIFICATION REDUNDANT POWER SUPPLY HOT-SWAPPABLE BPS-460RDX 6-OUTPUT 460W+460W BEST POWER SOLUTIONS, INC. 2F, NO.196-10, SEC.3, DA-TONG RD., XIZHI DIST., NEW TAIPEI CITY, TAIWAN R.O.C. Tel: 886-2-8647-1188
More informationVISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective Approved By A 11/11/13 Specification Release S. Sadot A1 14/01/14 Update ope
Electrical Specification for: Compact PCI - 6U - AC - 700W Telkoor Part Number: 900-7802-0000 SCALE RELEASE DATE 11/11/13 SHEET 1 OF 7 VISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective
More information2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES Medium-voltage rack-mount power supplies Page 2 The MV2000 series high-performance, medium output
More informationNLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
More informationINPUT VOLTAGE STARTING MINIMUM NORMAL MAXIMUM MAXIMUM INPUT RANGE VOLTAFE VOLTAGE VOLTAGE VOLTAGE CURRENT
RK-23/048RD100-7200 SPECIFICATION SCOPE This functional specification defines the performance characteristics of the switching mode regulated power supply, and also defines world wide safety requirements
More informationWatts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
More informationSFX Form Factor SST-SX650-G SST-SX500-G. The standard SFX power supply benchmark
SFX Form Factor SST-SX650-G SST-SX500-G The standard SFX power supply benchmark Support standard SFX form factor Silent running 92mm fan with 18 dba minimum All Japanese capacitors High efficiency with
More informationREDUNDANT DC 200W POWER SUPPLY. Technical Specifications TD-DC-200W-12V
REDUNDANT DC 200W Technical Specifications Model Number : Efficiency : >92% Minimum Maximum DC Input Voltage -36V -72V Maximum Output Power 200W Output Minimum Maximum Load Load 12V 0A 16.7A 5V - - 3.3V
More informationThe MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
More informationAC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Remote ON/OFF Function 200 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Standby 5V@1A with Fan, @0.4A without
More informationDDP400 and MDP400, SC series, are sealed, full potted, compact, high efficiency, small form factor AC-DC power supplies.
KEY FEATURES Universal input voltage range (90 264 V AC ) Input surge current limiting 400 W rated power (440 W peak up to 10 s) High efficiency up to 94% Low standby consumption (
More informationABC400 Series is a compact and efficient series of AC-DC open frame power supplies suited for telecom, datacom and many other applications.
is a compact and efficient series of AC-DC open frame power supplies suited for telecom, datacom and many other applications. The family meets the international information technology safety standards
More informationSwitched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Switched mode power supply for DIN rail mounting type SMP2 DC24V/0A Description Switched mode power supply for rail mounting, with independent change-over of input voltages (AC 5/20 V), integral passive
More informationECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
More informationCCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
More informationMedical / Industrial AC-DC Power Supply 1200W with 5V/2A Standby / MEB-1K2A series
Highlights & Features Up to 1200 Watt in 5"x8.03"x1.59" Package Up to 19.1W/inch 3 Power Density Full Power from 90V to 264V Full Power up to 50 C Ambient Up to 500KHrs MTBF 2MOPP Isolation Suited for
More informationGeneral. Environmental. EMC & Safety
AC-DC 400-2500 Watts f lexpower Series Configurable for Fast Time to Market SEMI F47 Compliant xppower.com Flexible Series & Parallel Capability -20 C Operation Extra Power Available at High Line Optional
More informationEfficiency (typ.) (Range) Max. Load VDC VDC ma ma ma(typ.) ma(typ.) μf % MJWI10-24S033
FEATURES Package Size 1.0 x1.0 x0.4 Ultrawide 4:1 Input Range High Efficiency up to 87% Operating Temp. Range 40 C to 80 C I/Oisolation Voltage 1500VDC Remote On/Off Control Input Filter complies to EN55022,Class
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 Low Output Ripple 4 500 Vdc Output Isolation
More information30mV LD03-10B12 3W 12V/250mA 330mA/60s W LD03-10B15 15V/200mA 250mA/60s W LD03-10B24. 24V/125mA 160mA/60s
D0-05 SERIES -5W, AC-DC COVERTER Dseries ----is a compact size power converter offered by Mornsun for PCB mount installation applications. It features universal input voltage, taking both DC and AC input
More informationLZS-A500-3 POWER SUPPLY Installation, Operation, and Maintenance Manual. IM-LZSA500-3 January 2008 Revision H
LZS-A500-3 POWER SUPPLY Installation, Operation, and Maintenance Manual IM-LZSA500-3 January 2008 Revision H Table of Contents LZS-A500-3 Power Supply 1) Safety and Recommended Practices 2 1.1 General
More informationTMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.
TMT Series, 10 to 50 Watt Features Ultra compact, fully encapsulated plastic case Single-, dual- and triple output models 2 package styles: - with screw terminal block for chassis mount - with solder pins
More informationSYNRAD PS DC Power Supply (Meanwell RSP )
AC Input 90-64 VAC AC Input Connections: Pin No. 3 SYNRAD PS-30-750 DC Power Supply (Meanwell RSP-750-7) AC Input Terminal Pin No. Assignment Assignment Diagram Maximum mounting torque AC/N AC/L FG 8Kgf-cm
More informationNLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More informationCLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
More informationXSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES Advanced Energy's Xsolo series, part of our low voltage solutions, delivers an incredible convection-cooled 504 W in an
More informationElectrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
More informationElectrical Specifications. Adjustment range Main output ± 5% Total regulation (line and load) ± 2.0% ± 5.0% Turn-on 120 Vac Input 2.0 s max.
POWER Data Sheet NLP250 Series Single Output Total Power: 250 W Input Voltage: 85-264 Vac # of Outputs: Single SPECIAL FEATURES Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air
More informationThese medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
More informationETA-USA ETA-USA. The Power Professionals
ETAUSA The Professionals AOJS W AC/DC Features Inrush Current Limit Wide Input voltage range Universal input 100240V Over voltage protection Overcurrent protection 3 Yr warranty MODEL/CHANNEL OUTPUT Nominal
More informationElectrical Specifications
300 Watt Industrial Features 3 x 5 x 1.5 inches Wide range AC input EMI Class B CE marked to LVD Class 1 & Class 2 options Input Voltage Input Frequency Electrical Specifications 90-264 VAC/120-390 VDC,
More information18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up
More informationECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
More informationIMA 600 Watts Power Supply Series. for medical and industrial applications. Product datasheet
IMA 600 Watts Power Supply Series for medical and industrial applications Product datasheet 600 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
More informationFS10 Series AC-DC Converter Compact Case(Power tank)
Electrical specifications INPUT Voltage Current Frequency Efficiency Inrush current (at cold start) Leakage current AC85~264V (or DC 110~340V) 50/60Hz (note) 0.25A Max. @ 110VAC / 0.13A Max. @ 220VAC 47~440Hz
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
More informationLFWLP W 12V 15.00A 25.00A 92%
WLP350 Series 350 Watts Low profile 1 5 x 3 footprint 200W / 350W Fan Up to 94% efficient Cover kits available EN55032 Level B conducted & radiated 5 Year warranty The LFWLP350 series of low profile, open
More information