AD240 AD O AD-2 SPECIFICATIONS. AC-DC Power Supplies Enclosed type

Size: px

Start display at page:

Download "AD240 AD O AD-2 SPECIFICATIONS. AC-DC Power Supplies Enclosed type"

Marvin Carpenter
6 years ago
Views:

AC-DC Power Supplies Enclosed type Ordering information - -O 1 2 3 4 1Series name 2Output wattage 3Output voltage 4Optional C :with Coating G :Low leakage current P :Parallel operation R :with Remote

1 AC-DC Power Supplies Enclosed type Ordering information - -O Series name 2Output wattage 3Output voltage 4Optional C :with Coating G :Low leakage current P :Parallel operation R :with Remote ON/OFF MODEL - -3 MAX OUTPUT WATTAGE[W] DC OUTPUT V 1A 3V 8A SPECIFICATIONS MODEL - -3 VOLTAGE[V] AC / f (User-selectable) FREQUENCY[Hz] EFFICIENCY[%] 85typ 85typ INPUT ACIN 1V 15max (Io=1%) INRUSH CURRENT[A] ACIN V 3max (Io=1%) LEAKAGE CURRENT[mA] 1.max (6Hz, According to DEN-AN) VOLTAGE[V] 3 CURRENT[A] 1 8 LINE REGULATION[mV] 3max 26max LO REGULATION[mV] 3max 4max RIPPLE[mVp-p] to+45c *1 max max OUTPUT RIPPLE NOISE[mVp-p] to+45c *1 48max 48max TEMPERATURE REGULATION[mV] to +45C 5max 6max DRIFT[mV] *2 5max 1max OUTPUT VOLTAGE JUSTMENT RANGE[V] START-UP TIME[ms] 5max (ACIN 1/V, Io=1%) HOLD-UP TIME[ms] 15typ (ACIN 1/V, Io=1%) PROTECTION CIRCUIT OVERCURRENT PROTECTION Works over 15% of rating and recovers automatically INPUT-OUTPUT AC1,5V 1minute, Cutoff current = 1mA, DC5V 1MW min (At Room Temperature) ISOLATION INPUT- AC1,5V 1minute, Cutoff current = 1mA, DC5V 1MW min (At Room Temperature) OUTPUT- AC5V 1minute, Cutoff current = 5mA, DC5V 1MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE to +6C, - 9%RH (Non condensing) (Refer to DERATING CURVE), 3,m (1,feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -25 to +8C, 1-95%RH (Non condensing), 9,m (3,feet) max ENVIRONMENT VIBRATION 1-55Hz, 19.6m/s 2 (2G), 3minutes period, 3minutes each along X, Y and Z axis IMPACT 98.m/s 2 (1G), ms, once each X, Y and Z axis OTHERS CASE SIZE/WEIGHT 75X99X2mm (WXHXD) /1.8kg max COOLING METHOD Convection *1 Measured by 15MHz oscilloscope. *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. -2

2 External view Voltage Adjust (23) LM 5 max (83.5) 4-M3 M4 VS1 VS2 AC1 1/ AC (17.5) Safety Cover M3 3-M3 (27) Mounting torque :.6N m(6.3kgf cm)max :.4N m(5.kgf cm)max Weight : 1.8kg or less Tolerance : t1 Dimensions in mm. Performance data STATIC CHARACTERISTICS RISE TIME & FALL TIME Output Voltage AC1V Io=1% Ripple RIPPLE mvp-p DC Output Io=1% AC Input Io=5% ACIN 1V INPUT VOLTAGE V 6Hz ( AC 1V ) 5ms/DIV OVERCURRENT CHARACTERISTICS DERATING CURVE 26 qconvection wforced Air(m 3 /min) OUTPUT CURRENT A -3

AC-DC Power Supplies Enclosed type 48 Ordering information 48-1 2 3 1Series name 2Output wattage 3Output voltage Please refer to derating curve, because the rated load current depends on cooling

3 AC-DC Power Supplies Enclosed type 48 Ordering information Series name 2Output wattage 3Output voltage Please refer to derating curve, because the rated load current depends on cooling method that is convention cooling or forced air. MODEL MAX OUTPUT WATTAGE[W] 48 3(Peak 7) DC OUTPUT V A 3V 1(Peak )A Forced air SPECIFICATIONS INPUT OUTPUT PROTECTION CIRCUIT MODEL VOLTAGE[V] AC / f (User-selectable) FREQUENCY[Hz] EFFICIENCY[%] 85typ 85typ ACIN 1V 3max (Io=1%) INRUSH CURRENT[A] ACIN V 6max (Io=1%) LEAKAGE CURRENT[mA] 1.max (6Hz, According to DEN-AN) VOLTAGE[V] 3 CURRENT[A] Forced air (Peak 25) 1 (Peak ) Convection (Peak 25) Ta=45C 1 (Peak ) Ta=45C LINE REGULATION[mV] 3max 26max LO REGULATION[mV] 3max 4max RIPPLE[mVp-p] *1 max ( to +45C) max ( to +5C) RIPPLE NOISE[mVp-p] *1 48max ( to +45C) 48max ( to +5C) TEMPERATURE REGULATION[mV] 5max ( to +45C) 6max ( to +5C) DRIFT[mV] *2 1max 1max OUTPUT VOLTAGE JUSTMENT RANGE[V] START-UP TIME[ms] 6max (ACIN 1/V, Io=1%) HOLD-UP TIME[ms] 15typ (ACIN 1/V, Io=1%) OVERCURRENT PROTECTION Works over 15% of rating and recovers automatically REMOTE ON/OFF Use terminal RC and G INPUT-OUTPUT AC1,5V 1minute, Cutoff current = 1mA, DC5V 1MW min (At Room Temperature) ISOLATION INPUT- AC1,5V 1minute, Cutoff current = 1mA, DC5V 1MW min (At Room Temperature) OUTPUT- AC5V 1minute, Cutoff current = 5mA, DC5V 1MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE to +65C, - 9%RH (Non condensing) (Refer to DERATING CURVE), 3,m (1,feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -25 to +8C, 1-95%RH (Non condensing), 9,m (3,feet) max ENVIRONMENT VIBRATION 1-55Hz, 19.6m/s 2 (2G), 3minutes period, 6minutes each along X, Y and Z axis IMPACT 196.1m/s 2 (G), 11ms, once each X, Y and Z axis OTHERS CASE SIZE/WEIGHT 11XX2mm (WXHXD) /3.kg max COOLING METHOD Forced air/convection *1 Measured by MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN: RM11). *2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. * When operated at pulse load, attach external capacitor at output line which is complying with the peak value of pulse current. -4

4 48 External view (33) (89) SHORT AC1V OPEN ACV H V.J RC RCG VS1 VS2 AC1 AC2 (.5) Voltage Adjust max (3) (17) (17) (81.5) (19.5) M Mounting torque : 1.5N m(kgf cm)max : 1.2N m(.8kgf cm)max Weight : 3.kg or less Tolerance : t1 Dimensions in mm. Performance data STATIC CHARACTERISTICS RISE TIME & FALL TIME Output Voltage 1 8 AC1V Io=1% Ripple RIPPLE mvp-p DC Output Io=1% AC Input Io=5% ACIN 1V INPUT VOLTAGE V 6Hz ( AC 1V ) 5ms/DIV OVERCURRENT CHARACTERISTICS DERATING CURVE 26 w qconvection wforced Air(m 3 /min) q OUTPUT CURRENT A -5

AC-DC Power Supplies Enclosed type 96 Ordering information 96-1 2 3 R 1Series name 2Output wattage 3Output voltage Please refer to derating curve, because the rated load current depends on cooling

5 AC-DC Power Supplies Enclosed type 96 Ordering information R 1Series name 2Output wattage 3Output voltage Please refer to derating curve, because the rated load current depends on cooling method that is convention cooling or forced air. MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT Forced air V 4A 3V 32A Convection V (Peak 4)A 3V (Peak 32)A SPECIFICATIONS MODEL VOLTAGE[V] AC f or DC - 37 FREQUENCY[Hz] or DC INPUT EFFICIENCY[%] 85typ 85typ INRUSH CURRENT[A] ACIN V 6typ (Io=1%) LEAKAGE CURRENT[mA] 1.max (6Hz, According to UL, CSA, VDE and DEN-AN) VOLTAGE[V] 3 CURRENT[A] Forced air 4 32 Convection *1 (Peak 4) (Peak 32) LINE REGULATION[mV] max 26max LO REGULATION[mV] 34max 4max OUTPUT RIPPLE[mVp-p] -1 to +45C *2 max max RIPPLE NOISE[mVp-p] -1 to +45C *2 48max 48max TEMPERATURE REGULATION[mV] -1 to +45C 4max 5max DRIFT[mV] *3 1max 1max OUTPUT VOLTAGE JUSTMENT RANGE[V] START-UP TIME[ms] 6max (ACIN V, Io=1%) HOLD-UP TIME[ms] 15typ (ACIN V, Io=1%) PROTECTION OVERCURRENT PROTECTION Works over 15% of rating and recovers automatically CIRCUIT OVERVOLTAGE PROTECTION Works at % of rating INPUT-OUTPUT AC3,V 1minute, Cutoff current = 25mA, DC5V 5MW min (At Room Temperature) ISOLATION INPUT- AC2,V 1minute, Cutoff current = 25mA, DC5V 5MW min (At Room Temperature) OUTPUT- AC5V 1minute, Cutoff current = 1mA, DC5V 5MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE -1 to +65C, 1-9%RH (Non condensing) (Refer to DERATING CURVE), 3,m (1,feet) max STORAGE TEMP.,HUMID.AND ALTITUDE - to +75C, 1-9%RH (Non condensing), 9,m (3,feet) max ENVIRONMENT VIBRATION 1-55Hz, 19.6m/s 2 (2G), 3minutes period, 6minutes each along X, Y and Z axis IMPACT 196.1m/s 2 (G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL695-1, CSA C.2 No.695-1, EN695-1, VDE Complies with IEC95 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A OTHERS CASE SIZE/WEIGHT 89X1.6X23mm (without terminal block) (WXHXD) /3.kg max COOLING METHOD Forced air/convection *1 For convection cooling, peak current for 1 seconds or less is acceptable, and output current must be less than A on average. *2 Measured by MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN: RM11). *3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. * When operated at pulse load, attach external capacitor at output line which is complying with the peak value of pulse current. -6

6 96 External view Voltage Adjust 5.5 Name Plate Safety cover 89 () Mounting torque : 1.5N m(kgf cm)max : 1.2N m(.8kgf cm)max VB CB L N (93) (19)(13) PIN ASSIGNMENT Marking VB CB L N Function +Output +Output -Output -Output Voltage balance Current balance Frame ground Input(L) Input(N) A per pin maximum for TB1 (26) Terminal Block TB1(M4) (Bottom sides) 8-M (Both sides).5 Dimensions in ( ) is for reference. Weight : 3.kg or less Tolerance : t1 Dimensions in mm Performance data STATIC CHARACTERISTICS RISE TIME & FALL TIME Output Voltage 1 8 Ripple Io=1% RIPPLE mvp-p DC Output AC Input Io=1% Io=5% ACIN V INPUT VOLTAGE V 6HZ 1ms/DIV ms/div OVERCURRENT CHARACTERISTICS DERATING CURVE 26 qconvection wforced Air(m 3 /min) OUTPUT CURRENT A -7

MODEL LEP100F-24 LEP100F-36 LEP100F-48 VOLTAGE[V] AC f or DC

MODEL LEP100F-24 LEP100F-36 LEP100F-48 VOLTAGE[V] AC f or DC AC-DC Power Supplies Open Frame/ Enclosed Type 00F Ordering information 00 F -2 -O 2 3 R Recommended EMI/EMC Filter NAC-06-72 High voltage pulse noise type : NAP series Low leakage current type : NAM series