4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p

Transcription

1 Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up to 93.8% These DIrail mounted power supplies have a robust case, 4mm screw terminal connectors and use high reliability components to give a long, troublefree life. The can be end mounted to save rail space or side mounted for use in lowprofile cabinets. The units can deliver up to 15% startup power and allow n1 parallel operation to increase the continuous output current or for supply redundancy. Relay contacts simplify DC OK monitoring. The series is designed for demanding commercial and industrial applications with U58, U695, IEC695 CB report and CE (VD EMC RoHS) certifications. They come with a full 5year warranty. 48 Watt DIRail Power Supply 5 5 YEAR w a r r a n t y Selection Guide Part nom. Input Output Output Rated Efficiency umber Voltage Range Voltage Adjustability Current typ. [VAC] [VDC] [VDC] [A] [%] BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range 85VAC 264VAC Absolute Maximum Input Voltage Input Current Inrush Current o oad Power Consumption max. 3s full load, full load, cold start at 25 C, cold start at 25 C, 85264VAC 4.59A 2.36A 6.8A 13A 3.85W 2.85W 3VAC 7.A 3.5A Input Frequency Range 47Hz 63Hz Power Factor Startup time Holdup time Rise time 48Vout 7 C Ripple & oise (1) 25 C ms 21ms 48Vout 2ms 22ms 2A 4A 5W 4W 1.6s 1.3s 3s 1.5s 1.3s 3s 31ms 1ms 48Vout 49ms 1ms 24mVpp 48mVpp 25 7 C 48Vout 48mVpp E U6951 Certified U58 Certified IEC/E6951 Certified otes: ote1: Measured at 2MHz bandwidth by using a 12 twisted pairwire terminated with a.1µf & 1µF parallel capacitor. continued on next page REV.: /217 PDR1

2 24 Efficiency [%] Efficiency vs oad oad Current [A] Dissipated Power [W] Power Dissipation vs oad oad Current [A] 5 Input Current vs oad 1.2 Power Factor vs oad over Vin Input Current [A] Power Factor [%] Iin [A] Iin [A] oad Current [%] oad Current [A] REGUATIO Parameter Condition Value Output Accuracy 48Vout ±.6% typ. / ±3.% max. ±.5% typ. / ±3.% max. ine Regulation, 48Vout ±.1% typ. / ±.5% max. oad Regulation % to 1% load ±.3% typ. / ±1.% max. Transient Response 1Hz & 1kHz, 5% duty, 25% load step change ±2.% typ. / ±5.% max. PDR2 REV.: /217

3 PROTECTIO Parameter Condition Value Input Fuse Short Circuit Protection (SCP) Over Voltage Protection (OVP) Over Voltage Category (OVC) Over oad Protection (OP) Over Temperature Protection (OTP) Isolation Voltage Isolation Resistance Insulation Grade eakage Current Power OK ED Overload Capability Pout [%] tested for 1 minute 48Vout I/P to O/P I/P to I/P to O/P I/P to O/P to O (green) OFF (red) Relay Contact Rating T1A, slow blow type Hiccup Mode 2933VDC, constant voltage auto recovery 5863VDC, constant voltage auto recovery OVC II imit the current by constant power circuit 115±5 C, detect on Heatsink of power transistor; shut down O/P, auto recovery after temperature goes down 3.KVAC / 15mA max. 2.5KVAC / 15mA max..5kvac / 2mA max. 1MW min. Reinforced.25mA max. 3.5mA max. Vout up to 9% of rated Vout Vout down to 8% of rated Vout Max. 3V/1A or 6V/.3 or 3VAC/.3A Resitive oad y Time (x) [s] Pout (y) [%] x 6 Time [s] EVIROMETA Parameter Condition Value Operating Temperature Range (2) with derating 25 C to 7 C Temperature Coefficient ±.3%/ C Operating Humidity noncondensing 2% 9% RH IP Rating IP X Pollution Degree (PD) PD2 Shock 15Hz 2G, 6min. Vibration 1G /11ms, along x,y and z axis MTBF MIHDBK217F G.B., full load, 25 C 3 x 1³ hours otes: ote2: The has been submitted and evaluated by Underwriters aboratory (U) to U 695 Standard for the use at the maximum ambient temperature (Tma) of 5 C. continued on next page Rev.: /217 PDR3

4 Thermal Derating 1 Output Power [%] Pout cont. Pout cont Ambient Temperature [ C] SAFETY AD CERTIFICATIOS Certificate Type Report / File umber Standard Information Technology Equipment, General Requirements for Safety Industrial Control Equipment Information Technology Equipment General Requirments for Safety (CB Scheme) RoHs 2 E A52 E47721 Vol3 Sec1 16BAS U6951, 2nd Edition, 214 CSA C22.2 o , 2nd Edition, 214 U58, 17th Edition, 213 CSA C22.2 o , 3rd Edition, 211 IEC6951, 2nd Edition:25, AM1:29 AM2:213 E6951:26 A11:29 A1:21 A12:211 A2:213 RoHs 211/65/EU EMC Compliance Report / Condition Standard / Criterion Information technology equipment Radio disturbance characteristics imits and methods of measurement Information technology equipment Immunity characteristics imits and methods of measurement imitations on the amount of electromagnetic intererence allowed from digital and electronic devices Methods of Measurement of Radiooise Emissions from owvoltage Electrical and Electronic Equipment in the Range of 9 khz to 4 GHz E5522:21 AC:211, Class B E5524:21 A1: CFR FCC Part 15, Subpart B, 216 ASI C63.4, 214 ESD Electrostatic discharge immunity test Air ±8kV, Contact ±4kV E6142, Criteria B Radiated, radiofrequency, electromagnetic field immunity test 3V/m E6143, Criteria A Fast Transient and Burst Immunity AC Power Port: ±1kV E6144, Criteria B Surge Immunity AC Power Port ±1kV, ±2kV E6145, Criteria B Immunity to conducted disturbances, induced by radiofrequency fields AC Power Port 3V E6146, Criteria A Power Magnetic Field Immunity 5Hz, 1A/m E6148, Criteria A Voltage Dips and Interruptions imits of Harmonic Current Emissions Voltage Fluctuations & Flicker Voltage Dips >95% Voltage Dips 3% Voltage Interruptions >95% E61411, Criteria B E61411, Criteria C E61411, Criteria C E6132:214, Criteria A E6133:213 PDR4 REV.: /217

5 DIMESIO and PHYSICA CHARACTERISTICS Parameter Type Value Material Package Dimension (xwxh) Package Weight Dimension Drawing (mm) Case Cover Aluminium ickel plated steel x 71. x 124.2mm 1.185kg typ. 38. DC OK V V V V Type Terminals and Wiring Solid Wire 16mm 2 Stranded Wire 14mm 2 American Wire Gauge Wire Stripping ength Screwdriver (slotted / cross) Screw Connector AWG171 8mm 3.5mm Recommended tightening torque.5m.8m Tolerance: X.X ±.5mm X.XX ±.25mm REV.: /217 PDR5

6 ISTAATIO Mounting Instruction Mounting 1 DC OK V V V V Releasing DC OK V V V V Click Mounting Multiple Power Supplies DC OK V V V V DC OK V V V V DC OK V V V V 2mm leave 2mm gap between supplies 2mm Minimum Abstand 2mm PDR6 REV.: /217

7 Parallel Operation & Phase Redundancy V V DC OK V V DC OK V V DC OK oad DC OK Single Operation: 1) Make sure that the front panel switch is set to single Use. 2) The output voltage can be increased by trim pot to compensate any cable losses. Parallel Operation: 1) Make sure that the front panel switch is set to single Use on each power supply. 2) Adjust each power supply to the exact same output voltage with same load and cooling conditions. 3) Set the front panel switches to. Use the same wire length for each power supply (star connection) and energize all units at the same time to avoid triggering overload protection. Derate the maximum output power to 9% of nominal ratings. For operation with more than three power supplies in parallel or series operation, please contact RECOM technical support for advice. Application Circuit T1A Input Filter Power Stage Output Filter V V OTP Shut Down Protection Relay ED DC OK OCP imit OVP Shut Down Output Voltage Regulation Single / Parallel REV.: /217 PDR7

8 PACKAGKIG IFORMATIO Parameter Type Value Packaging Dimension (xwxh) cardboard box 14. x 88. x 142.mm Packaging Quantity cardboard box 1pcs Storage Temperature Range 4 C to 85 C Storage Humidity 5% 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safetycritical applications (such as life support) without RECOM s explicit written consent. A safetycritical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safetycritical applications. PDR8 REV.: /217