RFFM MHz Transmit/Receive Module
|
|
|
- Marilyn Singleton
- 5 years ago
- Views:
Transcription
1 925MHz Transmit/Receive Module This module is intended for 868MHz and 915MHz AMR solutions. The FEM provides separate ports for Rx/Tx paths, single-ended Tx and single-ended Rx or Rx differential port, 14dB gain single stage LNA, and single port antenna connection. The PA switch provides a nominal insertion loss of 0.8dB. The device is provided in a 4.0mm x 3.0mm, 18-pin package. Package: LGA, 18-pin, 4.0mm x 3.0mm Features Tx Insertion Loss: 0.7dB 50Ω Tx Transceiver Interface 75Ω Rx Differential Transceiver Interface Rx Gain: 14dB BAL_IN ASW_RX Applications Wireless Automated Metering Wireless Alarm Systems ANT TX Portable Battery Powered Equipment Smart Energy 3 12 RXp 925MHz ISM Band Application BALUN Single Chip RF Front End Module ANT RXn C_RX VCC C_TX C_ANT Functional Block Diagram Ordering Information SB Standard 5-piece bag SQ Standard 25-piece bag SR Standard 100-piece reel TR13 Standard 2500-pieces reel PCK-410 Fully assembled eval board w/5-piece sample bag RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks, and registered trademarks are the property of their respective owners. 2013, RF Micro Devices, Inc. 1 of 5
2 Absolute Maximum Ratings Parameter Rating Unit Battery Voltage 5.5 V Operating Temperature -40 to 85 C Storage Temperature -40 to 150 C ESD, HBM (all pins) 1000 V ESD, CDM (all pins) 1000 V MSL MSL 3 Maximum Input Power to TX Port +25 dbm Maximum Input Power to ANT1/ANT2 Switch +20 dbm Maximum Input Power to BAL_IN +10 dbm Nominal Operating Parameters Parameter Specification Min Typ Max Unit Condition Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC , < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Frequency MHz RF Port Impedance 50 Ω Single-ended 75 Ω Balanced; RX_P and RX_N Operating Temperature C Storage Temperature C Total Leakage Current 1 10 µa RX Section V CC = 3.6V, C_TX = 0V, C_RX = 3.4V, Temperature = 25 C; Unless otherwise specified. Battery Voltage V V CC RX Gain db Noise Figure db Input IP3 1 dbm Input Return Loss 7 10 db Output Return Loss db LNA Current ma Over all conditions V CC RX Quiescent Current 9 ma Amplitude Imbalance db BAL_IN to RX_N/RX_P Phase Imbalance Deg Antenna Switch Section Isolation 25 db Any used port to any unused port TX Insertion Loss db Pins 2, 4 to Pins 13 RX Insertion Loss db Pins 2, 4 to Pins 17 Logic Voltage, High V All Logic I/Os, V BAT -0.2V Logic Voltage, Low V Logic Current, High 5 10 µa All Logic I/Os Logic Current, Low 0.4 µa application circuitry and specifications at any time without prior notice. 2 of 5
3 Switch Control Truth Table Operating Mode C_TX C_RX C_ANT TX-ANT TX-ANT RX-ANT RX-ANT All Off Note: *Switch Control Logic High=Min 3.1V to Max 3.8V *Switch Control Logic Low= 0.0V to Max 0.2V application circuitry and specifications at any time without prior notice. 3 of 5
4 Pin Out BAL_IN ASW_RX ANT TX 3 12 RXp ANT RXn C_RX VCC C_TX C_ANT Package Outline and Branding Drawing (Dimensions in millimeters) application circuitry and specifications at any time without prior notice. 4 of 5
5 Pin Names and Descriptions Pin Name Description 1 Ground 2 ANT2 Antenna 2 Connect Port 3 Ground 4 ANT1 Antenna 1 Connect Port 5 Ground 6 C_ANT Antenna Selection Control Line 7 C_TX Transmit Selection Control Line 8 VCC Supply Voltage 9 C_RX Receive Selection Control Line 10 Ground 11 RXN Receive Port Negative 12 RXP Receive Port Positive 13 TX Transmit Port 14 Ground 15 BAL_IN Input to Balun 16 Ground 17 ASW_RX Antenna Switched Rx Output 18 Ground application circuitry and specifications at any time without prior notice. 5 of 5
6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Qorvo: TR13
915MHz Transmit/Receive Module
RF6599 915MHz Transmit/Receive Module This module is intended for 915MHz AMR solutions. It provides separate ports for Rx and Tx paths and two ports on the output for connecting a diversity solution or
RF V TO 4.0V, 915MHz TRANSMIT/RECEIVE MODULE
RF6693.1V to 4.V, 91MHz Transmit/Receive Module RF669 3.1V TO 4.V, 91MHz TRANSMIT/RECEIVE MODULE Package: LGA, 28-Pin,.mm x.mm ASW_RX BAL_IN 1 28 27 26 2 24 23 22 Features Tx Output Power: 3dBm NC 2 3
RFFM V to 4.0V, 450MHz to 470MHz Transmit/Receive Front End Module
.V to.0v, 0MHz to 0MHz Transmit/Receive Front End Module Package Style: LGA, 8-Pin,.mm x.0mm NC 8 Features Tx Output Power: 0dBm Tx Gain: 0dB Separate 0Ω Tx/Rx Transceiver Interface Rx Insertion Loss:
RFFM V to 4.2V, ISM Band, 1W, 405MHz to 475MHz Transmit/Receive Module. Features. Applications. Ordering Information
RFFM6403 2.5V to 4.2V, ISM Band, 1W, 405MHz to 475MHz Transmit/Receive Module The RFFM6403 is a single-chip front end module (FEM) for applications in the 405MHz and 475MHz ISM Bands. The RFFM6403 addresses
RFFM8511TR7. 4.9GHz to 5.85GHz a/n/ac WiFi Front End Module. Features. Applications. Ordering Information
4.9GHz to 5.85GHz 802.11a/n/ac WiFi Front End Module The provides a complete integrated solution in a single front end module (FEM) for WiFi 802.11a/n/ac systems. The ultra-small factor and integrated
RF V TO 4.0V,915MHz Transmit/Receive
3.3V to 4.0V,9MHz Transmit/Receive Module RF639 3.3V TO 4.0V,9MHz Transmit/Receive Module Package: LGA, 8-Pin,.mm x.0mm Features Tx Output Power: dbm Separate 0 Tx/Rx Transceiver Interface Rx Insertion
SAW BPF SW2_OUT GND GND 868/915 RFIO SW2 GND 450 RFIO GND CTL1 CTL2 CTL LOGIC CTL3 CTL4 CTL5 VDIG. Product Description. Ordering Information
2.7V to 4.4V, 9MHz Transmit/Receive Module; Thru Mode 4MHz to 928MHz RF6549 2.7V to 4.4V, 9MHz Transmit/Receive Module; Thru Mode 4MHz to 928MHz Package: LGA, 32-Pin, 6mm x 6mm TX TX SAW BPF SAW BPF SW2_OUT
RFFM V to 5.0V, 2.4GHz to 2.5GHz b/g/n/ac WiFi Front End Module. Features. Applications. Ordering Information
3.0V to 5.0V, 2.4GHz to 2.5GHz 802.11b/g/n/ac WiFi Front End Module The RFFM4293 provides a complete integrated solution in a single front end module (FEM) for WiFi 802.11b/g/n/ac and Bluetooth systems.
RFFM8500Q. 4.9GHz to 5.85GHz a/n Front End Module. Features. Applications. Ordering Information
4.9GHz to 5.85GHz 802.11a/n Front End Module The RFFM8500Q provides a complete integrated solution in a single Front End Module (FEM) for WiFi 802.11a/n systems. The ultra small form factor and integrated
RF V to 4.2V, 2.4GHz Front End Module
3.0V to 4.2V, 2.4GHz Front End Module Package Style: QFN, 20-Pin, 3.5mm x 3.5mm x 0.5mm TXCT _BAIS GND NC 15 14 13 12 11 Features TX Output Power: 23dBm TX Gain: 28dB RX Gain: 11.5dB RX NF: 3dB Integrated
GND GND RFN BALUN RFP GND. Product Description. Ordering Information. Standard 2500 piece reel. GaAs HBT GaAs MESFET InGaP HBT
RFFM0.0V TO.V,.GHZ FRONT END MODULE Package Style: Laminate, -Pin, mm x mm x mm C_RX_TX VCCLNA N/C ANTSEL 0 9 CE 8 Features Tx Output Power=dBm Integrated RF Front End Module with Balun, PA, filter, LNA
RF V TO 4.2V, 2.4GHz FRONT END MODULE
3.V TO 4.2V, 2.4GHz FRONT END MODULE Package Style: QFN, 2-Pin, 3.5mmx3.5mmx.5mm TXCT GND VCC_BAIS VCC NC 15 14 13 12 11 Features TX Output Power: 22dBm RX Gain: 11.5dB RX NF: 2.5dB Integrated RF Front
RF V TO 3.6V, 2.4GHz FRONT END MODULE
3.V TO 3.6V, 2.4GHz FRONT END MODULE Package Style: QFN, 2-Pin, 3.mmx3.mmx.mm NC VBAT VBAT NC 4 3 2 Features Tx Output Power=22dBm Integrated RF Front End Module with TX/RX switch, PA, filter, and DP2T
RF V TO 4.0V, 470MHz to 510MHz TRANSMIT/RECEIVE MODULE
3.3V to 4.0V, 470MHz to 510MHz Transmit/Receive Module 3.3V TO 4.0V, 470MHz to 510MHz TRNSMIT/REEIVE MODULE Package: LG, 8-Pin, 5.5mm x 5.0mm VReg V 1 8 7 6 5 4 3 Features Tx Output Power: 30dm Separate
RFSW6062 Low Insertion High Isolation SP6T Switch 5MHz to 6000MHz
Low Insertion High Isolation SP6T Switch 5MHz to 6000MHz The RFSW6062 is a low loss, high isolation SP6T switch with performance optimized for use in Cellular BTS applications. Plus it is also ideally
RF3241SR. RF3241 Quad-Band GSM, Polar EDGE Transmit Module, Six UMTS TRX Switch Ports
Quad-Band GSM, Polar EDGE Transmit Module, Six UMTS TRX Switch Ports The RF3241 is a quad-band GSM/GPRS, Polar EDGE transmit module with six interchangeable RF switch ports. The power amplifier supports
RF V TO 4.5V, 915MHZ ISM BAND TRANSMIT/RECEIVE MODULE
4.0V to 4.5V, 915MHz ISM AND TRANS- MIT/REEIVE MODULE 4.0V TO 4.5V, 915MHZ ISM AND TRANSMIT/REEIVE MODULE Package: LGA, 28-pin, 6mm x 6mm DAV1 N PAV2 1 28 27 26 25 24 23 22 Features Tx Output Power: 28dm
DATA GND VCC GND RF1 GND GND GND. Product Description. Ordering Information. Sample bag with 25 pieces 7 Sample reel with 100 pieces
Serial Controlled 75W Digital Step Attenuator 5MHz to 2000MHz, 6- Bit, LSB SERIAL CONTROLLED 75 DIGITAL STEP ATTENUATOR 5MHz TO 2000MHz, 6-BIT, Package: MCM, 24-Pin, 4.2mm x 4.2mm Features Frequency Range
RFSA3043TR7. 75Ω Voltage Controlled Attenuator 5MHz to 3000MHz. Features. Applications. Ordering Information RFSA3043
75Ω Voltage Controlled Attenuator 5MHz to 3000MHz RFMD s RFSA3043 is a fully monolithic analog voltage controlled attenuator (VCA) featuring exceptional linearity over a typical temperature compensated
RFFM4503TR7. Features. Applications. Ordering Information. Package: Laminate, 16-pin, 3.0mm x 3.0mm x 1.0mm
RFFM4503 4.9GHz to 5.85GHz 802.11a/n/ac Wi-Fi Front End Module The RFFM4503 provides a complete integrated solution in a single front end module (FEM) for Wi-Fi 802.11a/n/ac systems. The ultrasmall factor
RFVC1800 Wideband MMIC VCO with Buffer Amplifier 8GHz to 12GHz
Wideband MMIC VCO with Buffer Amplifier 8GHz to 12GHz RFMD s wideband voltage controlled oscillator is a GaAs InGaP HBT MMIC with integrated VCO core and RF output buffer. The part operates from a single
LNA In. Input Match. LNA Vref. LNA Sel. RX Switch. TX Switch GND. PA Vcc2 GND GND. PA Out. Product Description. GaAs HBT GaAs MESFET InGaP HBT
3.0V to 4.2V, ISM Band Transmit/Receive Module with Diversity Transfer Switch RFFM6904 3.0V TO 4.2V, ISM BAND TRANSMIT/RECEIVE MODULE WITH DIVERSITY TRANSFER SWITCH Package: LGA, 32-pin, 8mm x 8mm x 1.2mm
RF2436 TRANSMIT/RECEIVE SWITCH
Transmit/Receive Switch RF2436 TRANSMIT/RECEIVE SWITCH Package Style: SOT-5 Features Single Positive Power Supply Low Current Consumption db Insertion Loss at 900MHz 24dB Crosstalk Isolation at 900MHz
RF V TO 4.2V, 2.4GHz FRONT-END MODULE
3.0V TO 4.2V, 2.4GHz FRONT-END MODULE Package Style: QFN, 20-Pin, 3.5mmx3.5mmx0.5mm Features TX Output Power: 22dBm TX Gain: 28dB RX Gain: 11.5dB RX NF: 2.5dB Integrated LNA With Bypass Mode Applications
SGL0363Z. 5MHz to 2000MHz Low Noise Amplifier. Germanium. Simplified Device Schematic. Vpc. Narrow-band Matching Network. Gnd
5MHz to MHz Low Noise Amplifier Silicon Germanium 5MHz to MHz LOW NOISE AMPLIFIER SILICON GERMANIUM Package: SOT-363 Product Description RFMD s is a low power, low noise amplifier. It is designed for.7v
RFVC1843TR7. 9.8GHz to 11.3GHz MMIC VCO with Fo/2 and Fo/4 Outputs. Features. Applications. Ordering Information
RFVC1843 9.8GHz to 11.3GHz MMIC VCO with Fo/2 and Fo/4 Outputs RFMD's RFVC1843 is a 5V InGaP MMIC VCO with an integrated frequency divider providing additional Fo/2 and Fo/4 outputs. With an Fo frequency
RFGA0024. InGaP HBT. 1000MHz. Product Description. Ordering Information
InGaP HBT MMIC Amplifier 5MHz TO 1MHz RFGA24 InGaP HBT MMIC Amplifier 5MHz TO 1MHz Package: SOT-89 Features Low Cost Broadband Gain Internally Matched Internal Active Bias No Dropping Resistor Single Supply
RFVC GHz to 12.1GHz MMIC VCO with Fo/2 and Fo/4 Outputs
10.8GHz to 12.1GHz MMIC VCO with Fo/2 and Fo/4 Outputs RFMD's RFVC1844 is a 5V InGaP MMIC VCO with an integrated frequency divider providing additional Fo/2 and Fo/4 outputs. With an Fo frequency range
RFDA3016 Digital Controlled Variable Gain Amplifier 3000MHz to 3800MHz, 6-Bit 0.5dB LSB Control
Digital Controlled Variable Gain Amplifier 3MHz to 38MHz, 6- Bit.dB LSB Control RFDA316 Digital Controlled Variable Gain Amplifier 3MHz to 38MHz, 6-Bit.dB LSB Control Package: MCM 28-Pin, 6.mm x 6.mm 28
GND GND GND. Product Description. Ordering Information. Sample bag with 25 pieces 7 Sample reel with 100 pieces. GaAs MESFET Si BiCMOS Si CMOS Si BJT
Temperature Compensating Attenuator TEMPERATURE COMPENSATING ATTENUATOR Package: QFN, 16-Pin,.9mm x 3mm x 3mm GND VDD GND GND 16 15 14 13 Features Patent Pending Circuit Architecture Broadband 5MHz to
RF V, SWITCH AND LNA FRONT END SOLUTION
3.3V, SWITCH AND LNA FRONT END SOLUTION Package Style: QFN, -pin, 2mmx2mmx0.5mm C_BT 9 BT GND 7 Features Single Supply Voltage 3.0V to.5v Integrated SP3T Switch and LNA With Bypass Typical gain is db and
Not For New Design FMS W GaAs phemt SPDT SWITCH. Product Description. Features. Applications
10W GaAs phemt SPDT Switch FMS2031-001 10W GaAs phemt SPDT SWITCH Package: 3 mm x 3 mm QFN Product Description The FMS2031-001 is a 10 W, Single-pole, Double-throw, (SPDT) GaAs phemt reflective antenna
RFPA3805TR13. GaAs HBT 2-Stage Power Amplifier 700MHz to 2700MHz
GaAs HBT 2-Stage Power Amplifier 700MHz to 2700MHz RFMD s RFPA3805 is a GaAs HBT linear power amplifier specifically designed for Wireless Infrastructure applications. Using a highly reliable GaAs HBT
LNA VCC RX OUT TX IN VREG. Product Description. Ordering Information. Standard 25 piece bag Standard 2500 piece reel. GaAs HBT GaAs MESFET InGaP HBT
2.4GHz TO 2.5GHz, 802.11b/g/n SINGLE-BAND FRONT END MODULE Package Style: QFN, 16-pin, 3.0 x 3.0 x 0.5 mm LNA EN C RX C TX BT 16 15 14 13 Features Single Module Radio Front- End Single Supply Voltage 3.0V
Product Description. Ordering Information. GaAs MESFET Si BiCMOS
Digital Controlled Variable Gain Amplifier 1700MHz to 2400MHz RFDA2077 DIGITAL CONTROLLED VARIABLE GAIN AMPLIFIER 1700MHz to 2400MHz Package: MCM 32-Pin, 7.0mmx7.0mm Features Dual Channel VGA Frequency
CMOS 2.4GHZ ZIGBEE/ISM TRANSMIT/RECEIVE RFeIC
CMOS 2.4GHZ ZIGBEE/ISM TRANSMIT/RECEIVE RFeIC Description 17 1 2 3 4 TXRX VDD VDD D 16 15 14 13 12 11 10 ANT 9 The RFX2401C is a fully integrated, single-chip, single-die RFeIC (RF Front-end Integrated
RFDA4005TR13. 6-Bit, Digital Controlled Variable Gain Amplifier 50MHz to 4000MHz
6-Bit, Digital Controlled Variable Gain Amplifier 50MHz to 4000MHz RFMD s RFDA4005 is a digitally controlled variable gain amplifier featuring high linearity over the entire gain control range with noise
SDA-3000 GaAs Distributed Amplifier
GaAs Distributed Amplifier RFMD s SDA-3000 is a directly coupled (DC) GaAs microwave monolithic integrated circuit (MMIC) driver amplifier die designed for use as a Mach Zehnder Modulated (MZM) laser driver
RFFM3482Q 2.4GHz to 2.5GHz, Automotive WiFi Front End Module
2.4GHz to 2.5GHz, Automotive WiFi Front End Module Package Style: QFN, 16-pin, 3mm x 3mm x 0.45mm RXBN RXBP GND ANT 16 15 14 13 Features Single Voltage Supply 3.3V to 4.2V Integrated 2.5GHz b/g/n Amplifier,
RFDA0056 Digital Controlled Variable Gain Amplifier 300MHz to 1100MHz, 6-Bit 0.5dB LSB Control
Digital Controlled Variable Gain Amplifier 3MHz to MHz, 6- Bit.dB LSB Control RFDA6 Digital Controlled Variable Gain Amplifier 3MHz to MHz, 6-Bit.dB LSB Control Package: MCM 8-Pin, 6.mm x 6.mm 8 7 6 3
SBB MHz to 6000MHz InGaP HBT ACTIVE BIAS GAIN BLOCK. Features. Product Description. Applications
50 to 6000 InGaP HBT Active Bias Gain Block SBB3000 50 to 6000 InGaP HBT ACTIVE BIAS GAIN BLOCK Package: Bare Die Product Description RFMD s SBB3000 is a high performance InGaP HBT MMIC amplifier utilizing
Product Description. Ordering Information. GaAs MESFET Si BiCMOS Si CMOS Si BJT. DRAFT DRAFT1 of
UPSTREAM CATV AMPLI- FIER UPSTREAM CATV AMPLIFIER Package: QFN, -Pin, 4mm x 4mm Features Single.V Supply Operation Low Power Consumption: 14mA Typical 6db Dynamic Range: -.5dBm To 61dBmV Output Excellent
RFDA0035 DIGITAL CONTROLLED IF DUAL VGA 5 BIT 1dB LSB CONTROL
Digital Controlled IF Dual VGA RFDA0035 DIGITAL CONTROLLED IF DUAL VGA 5 BIT 1dB LSB CONTROL Package: QFN 32-Pin, 5.0mmx5.0mm 32 31 29 OPB- A1 A0 IPA+ IPA- GNDA VCCA OPA+ OPA- 28 27 26 25 Features Dual
Absolute Maximum Ratings Parameter Rating Unit Max Input Power, OFDM Modulated, 3:1 Load VSWR +39 dbm Max Input Power, 2:1 VSWR +41 dbm ESD HBM Rating
1W GaAs phemt SPDT Switch FMS231-1 1W GaAs phemt SPDT SWITCH Package: 3mmx3mm QFN Product Description The FMS231-1 is a 1W, Single-pole, Double-throw, (SPDT) GaAs phemt reflective antenna switch. The switch
RFPA GHz TO 5.9GHz 2W InGaP AMPLIFIER
4.9GHz to 5.9GHz 2W InGaP AMPLI- FIER RFPA5026 4.9GHz TO 5.9GHz 2W InGaP AMPLIFIER Package: DFN, 6-pin, 5.59mm x 6.23mm x 0.85mm Vcc Features P1dB=33dBm at 5V 802.11g 54Mb/s Class AB Performance P OUT
VCC1 GND IN GND LOP LON GND GND. Product Description. GaAs HBT GaAs MESFET InGaP HBT
Direct Quadrature Modulator 145MHz to 27MHz RFMD214 DIRECT QUADRATURE MODULATOR 145MHz TO 27MHz Package: QFN, 24-Pin, 4mm x 4mm VCC1 IN IP 24 23 22 21 2 19 Features ACPR Performance: -7dBc Typ. for 1-Carrier
CMOS 5GHz WLAN ac RFeIC WITH PA, LNA AND SPDT
CMOS 5GHz WLAN 802.11ac RFeIC WITH PA, LNA AND SPDT RX LEN 16 RXEN ANT 15 14 13 12 11 Description RFX8051B is a highly integrated, single-chip, single-die RFeIC (RF Front-end Integrated Circuit) which
RF8889A SP10T ANTENNA SWITCH MODULE
SP10T ANTENNA SWITCH MOD- ULE RF8889A SP10T ANTENNA SWITCH MODULE Package: QFN, 3.0mmx3.8mmx0.85mm GSM Rx1 RF8889A GSM Rx2 Features Broadband Performance Suitable for all Cellular Modulation Schemes up
RF3932D 60W GaN on SiC Power Amplifier Die
60W GaN on SiC Power Amplifier Die RF3932D Package: Die The RF3932D is a 48V, 60W, GaN on SiC high power discrete amplifier die designed for commercial wireless infrastructure, cellular and WiMAX infrastructure,
SKY : 2.4 GHz Transmit/Receive Front-End Module with Integrated Low-Noise Amplifier
DATA SHEET SKY65344-21: 2.4 GHz Transmit/Receive Front-End Module with Integrated Low-Noise Amplifier Applications 2.4 GHz ISM band radios ZigBee FEMs IEEE 802.15.4 applications Features Transmit output
CMOS 5GHz WLAN ac RFeIC WITH PA, LNA AND SPDT
CMOS 5GHz WLAN 802.11ac RFeIC WITH PA, LNA AND SPDT RX LEN 16 RXEN ANT 15 14 13 12 11 Description RFX8051 is a highly integrated, single-chip, single-die RFeIC (RF Front-end Integrated Circuit) which incorporates
SGA2363ZDC to 5000MHz, Cascadable. SiGe HBT. MMIC Amplifier. Frequency (GHz) 5000 MHz >10dB
DC to 5MHz, Cascadable SiGe HBT MMIC Amplifier SGA233Z DC to 5MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER Package: SOT-33 Product Description The SGA233Z is a high performance SiGe HBT MMIC Amplifier. A Darlington
SGA2463Z. Frequency (GHz) 18.0 dbm 1950MHz. 7.2 dbm 1950 MHz 255 C/W
SGA243Z DC to 5MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER Package: SOT-33 Product Description The SGA243Z is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring one-micron emitters
QPF4206BTR7. Wi-Fi Front End Module. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information PRELIMINARY
Product Overview The Qorvo is an integrated front end module (FEM) designed for Wi-Fi 802.11ax systems. The compact form factor and integrated matching minimizes layout area in the application. Performance
Product Description. Ordering Information. GaAs HBT GaAs MESFET InGaP HBT
RECEIVE AGC AMPLIFIER Package Style: MSOP-8 Features Supports Basestation Applications -55dB to +51dB Gain Control Range at 85MHz Single 3V Power Supply IN+ 1 IN- 2 GND 3 8 VCC1 7 VCC2 6 OUT+ -2dBm Input
2.4 GHz TX / RX Booster With Diversity Switch for IoT / BLE / ZigBee
2.4 GHz TX / RX Booster With Diversity Switch for IoT / BLE / ZigBee NC DNC NC TXRX 21 1 2 3 4 5 VDD VDD 20 19 18 DNC DNC 17 16 6 7 8 9 TXEN RXEN PDET Mode 10 SWant 15 IND 14 ANTA 13 12 ANTB 11 DESCRIPTION
SGA3363Z. = 35 ma (Typ.) Frequency (GHz) T L MHz >10dB 255 C/W
SGA3363Z DC to MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER Package: SOT-363 Product Description The SGA3363Z is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring one-micron emitters
N/C GND LOIN GND N/C N/C N/C N/C. VLOA1 VLOA2 N/C N/C Vc1 Vc2 Vg2 VMPA. Product Description. Ordering Information
RFUV173 RFUV173 21GHz TO 26.GHz GaAs MMIC IQ UPCONVERTER Package: QFN, 32-Pin, mm x mm x.9mm N/C GND I N/C GND Q N/C Vg1 32 31 3 29 28 27 26 2 Features RF Frequency: 21GHz to 26.GHz LO Frequency (LSB):
RFHA1004TR7. 25W GaN Wide-Band Power Amplifier 700MHz to 2500MHz. Features. Applications. Ordering Information. Package: Air-Cavity Cu
25W GaN Wide-Band Power Amplifier 700MHz to 2500MHz The is a wideband Power Amplifier designed for CW and pulsed applications such as wireless infrastructure, RADAR, military communication radios and general
DATA SHEET SE2436L: High Power 2.4 GHz Front End Module. Product Description. Applications
Applications Smart Meters In-home appliances Smart thermostats Features Integrated PA with 27 dbm output power Integrated LNA with programmable bypass Integrated antenna switching with Tx and Rx diversity
Gain and Return Loss vs Frequency. s22. Frequency (GHz)
SBA4086Z DCto5GHz, CASCADABLE InGaP/GaAs HBT MMIC AMPLIFIER Package: SOT-86 Product Description RFMD s SBA4086Z is a high performance InGaP/GaAs Heterojunction Bipolar Transistor MMIC Amplifier. A Darlington
Specification Min. Typ. Max.
High Power Reflective GaAs SP4T Switch FMS2016-005 HIGH POWER REFLECTIVE GaAs SP4T SWITCH Package: 3 mm x 3 mm QFN Product Description The FMS2016-005 is a low loss, high power, linear single-pole four-throw
Absolute Maximum Ratings Parameter Rating Unit V D1, V D2, V D3 +8 V V G 0 V Junction Temperature C Continuous P DISS (T = ) C/W (derate 37 mw/ C abov
9.8GHz to 13.5GHz High Linearity RFPA1002 9.8GHz TO 13.5GHz HIGH LINEARITY POWER AMPLIFIER Package: Ceramic QFN, -pin, 6mm x 6mm x 0.95mm 38 Vd1 Vg2 Vd2a 37 36 34 33 1 Features Frequency Range: 9.8GHz
CMOS 2.4GHZ ZIGBEE/ISM TRANSMIT/RECEIVE RFeIC
hot RFX2401C CMOS 2.4GHZ ZIGBEE/ISM TRANSMIT/RECEIVE RFeIC Description 1 2 3 4 TXRX 17 VDD VDD DNC 16 15 14 13 12 11 10 ANT 9 The RFX2401C is a fully integrated, single-chip, single-die RFeIC (RF Front-end
CMOS 2.4GHZ ZIGBEE/ISM TRANSMIT/RECEIVE RFeIC
CMOS 2.4GHZ ZIGBEE/ISM TRANSMIT/RECEIVE RFeIC Description 17 1 2 3 4 TXRX VDD VDD D 16 15 14 13 12 11 10 ANT 9 The is a fully integrated, single-chip, single-die RFeIC (RF Front-end Integrated Circuit)
Product Description. Ordering Information. GaAs HBT GaAs MESFET InGaP HBT
RFPA38 GaAs HBT 15MHz TO 96MHz POWER AMPLIFIER Package: SOIC-8 Features 5W Output Power (P1dB) High Linearity: OIP3>48dBm High Efficiency Low Noise: NF=3.2dB at 945MHz 5V to 7V Operation Thermally Enhanced
RF3826TR13. 9W GaN Wide-Band Power Amplifier 30MHz to 2500MHz. Features. Applications. Ordering Information RF3826
9W GaN Wide-Band Power Amplifier 30MHz to 2500MHz The RF3826 is a wideband Power Amplifier designed for CW and pulsed applications such as wireless infrastructure, RADAR, two way radios, and general purpose
FMS W GaAs WIDEBAND SPDT SWITCH. Features. Product Description. Applications
10W GaAs Wideband SPDT Switch FMS2031-001 10W GaAs WIDEBAND SPDT SWITCH Package: 3mmx3mm QFN Product Description The FMS2031-001 is a 10-Watt, low loss, single-pole, dual-throw, Gallium Arsenide antenna
QPF4200SR. Wi-Fi Front End Module. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information
Product Overview The Qorvo QPF4200 is an integrated front end module (FEM) designed for Wi-Fi 802.11ax systems. The compact form factor and integrated matching minimizes layout area in the application.
DATA SHEET SE2432L: 2.4 GHz Smart Energy/ZigBee Front End Module. Product Description. Applications
Applications Smart Meters In-home appliances Smart thermostats Features Integrated PA with up to 24 dbm output power Integrated LNA with programmable bypass Integrated antenna switching with Tx and Rx
Simplified Device Schematic. Pin 18. Pin 8. Pin 16. Stage 1 Bias. Stage 2 Bias. Pin 10
7MHz to 2.7GHz 5V 1W Power Amplifier SZA-244(Z) 7MHz to 2.7GHz 5V 1W Power Amplifier Package: QFN, 4mm x 4mm Product Description RFMD s SZA-244 is a high efficiency class AB heterojunction bipolar transistor
RF5623 SINGLE 5.0V, 3.3 TO 3.8 GHZ LINEAR POWER AMPLIFIER
Single 5.0V, 3.3 to 3.8 GHz Linear Power Amplifier SINGLE 5.0V, 3.3 TO 3.8 GHZ LINEAR POWER AMPLIFIER Package Style: QFN, 16-Pin, 3mmx3mmx0.45mm Features High Gain; 32dB 2.5% EVM (RMS) at 26dBm, 5.0V Integrated
SKY LF: PHEMT GaAs IC High-Power 4-CTL DPDT Switch LF 6 GHz
data sheet SKY13318-321LF: PHEMT GaAs IC High-Power 4-CTL DPDT Switch LF 6 GHz Features l Application 82.11a (5.2 5.8 GHz) and 82.11b, (2.4 GHz) diversity l Operating frequency LF 6 GHz l Positive low
Amplifier Configuration
Push-Pull MHz to 1MHz High Linearity InGaP HBT Amplifier CGA-7718Z PUSH-PULL MHz to 1MHz HIGH LINEARITY InGaP HBT AMPLIFIER Package: SOIC-8 Product Description RFMD s CGA-7718Z is a high performance InGaP
SKY : 2.4 GHz Transmit/Receive Front-End Module
DATA SHEET SKY65337-11: 2.4 GHz Transmit/Receive Front-End Module Applications 2.4 GHz ISM band radios ZigBee FEMs IEEE 802.15.4 applications Features Transmit output power > +20 dbm Bidirectional path
CMOS 2.4GHZ TRANSMIT/RECEIVE WLAN RFeIC
CMOS 2.4GHZ TRANSMIT/RECEIVE WLAN RFeIC 17 1 RX 2 3 VDD VDD DNC 16 15 14 13 12 11 10 ANT Description The RFX2402C is a fully integrated, single-chip, single-die RFeIC (RF Front-end Integrated Circuit)
RFPA TO 5 V PROGRAMMABLE GAIN HIGH EFFICIENCY POWER AMPLIFIER
3 TO 5 V PROGRAMMABLE GAIN HIGH EFFICIENCY POWER AMPLIFIER Package Style: QFN, 16-Pin, 3 mm x 3 mm Features 0.5 W CW Output Power at 3.6 V 1 W CW Output Power at 5 V 32 db Small Signal Gain at 900 MHz
CMOS 5GHz WLAN a/n/ac RFeIC WITH PA, LNA, AND SPDT
CMOS 5GHz WLAN 802.11a/n/ac RFeIC WITH PA, LNA, AND SPDT Description RX 1 2 LNA_EN 16 ANT 15 14 13 12 11 RFX8055 is a highly integrated, single-chip, single-die RFeIC (RF Front-end Integrated Circuit)
ML485-G. Applications. Functional Block Diagram. Product Features. General Description. Pin Configuration. Ordering Information
RFMD + TriQuint = Qorvo ML 1.-3.2 GHz High IP3 Mixer with Integrated LO Amp Applications PCS / 3G Base station / Repeaters WCDMA / LTE WiMax / WiBro ISM / Fixed Wireless HPA Feedback Paths Product Features
QPL7210TR7. 2.4GHz Wi-Fi LNA+BAW Receive Module. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information
2.4GHz Wi-Fi LNA+BAW Receive Module Product Overview The provides a complete integrated receive solution in a single placement front end module (FEM) for Wi-Fi 802.11a/n/ac systems. The full integration
Product Description. GaAs HBT GaAs MESFET InGaP HBT
Direct Quadrature Modulator RFMD0014 DIRECT QUADRATURE MODULATOR Package: QFN, 24-Pin, 4mm x 4mm Features ACPR Performance: -70 dbc Typ. for 1-Carrier WCDMA Very High Linearity: +26 dbm OIP3 Very Low Noise
NOT FOR NEW DESIGNS SGA5386Z. Absolute Maximum Ratings MHz. Parameter Rating Unit. Typical Performance at Key Operating Frequencies
DC to 5MHz, Cascadable SiGe HBT MMIC Amplifier DC to 5MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER Package: SOT-86 Product Description The is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration
75 VOLTAGE CONTROLLED ATTENUATOR GND RFIN. Product Description. Ordering Information. GaAs MESFET Si BiCMOS Si CMOS Si BJT
RFS313 75W Voltage Controlled ttenuator RFS313 75 VOLTGE CONTROLLED TTENUTOR Package Style: QFN, 16-Pin,.9mm x 3mm x 3mm MODE VDD VC GND 16 15 14 13 Features Patent Pending Circuit rchitecture roadband
SKY : 902 to 928 MHz High-Power RF Front-End Module
DATA SHEET SKY66101-11: 902 to 928 MHz High-Power RF Front-End Module Applications Range extender Smart meters CPS CTX CSD ANT_SEL In-home appliances Smart thermostats PA_IN PA Logic Control ANT1 Features
RF1136 BROADBAND LOW POWER SP3T SWITCH
BROADBAND LOW POWER SP3T SWITCH Package Style: QFN, 12-Pin, 2.5 mm x 2.5 mm x 0.6 mm Features Low Frequency - 3.5 GHz Operations Very Low Insertion Loss: Cell Band 0.25 db PCS Band 0.30 db High Isolation:
RF V LOW NOISE AMPLIFIER/ 3V DRIVER AMPLIFIER
3.3V LOW NOISE AMPLIFIER/ 3V DRIVER AMPLIFIER Package Style: SOT 5-Lead Features Low Noise and High Intercept Point Adjustable Bias Current Power Down Control Single 2.7V to 5.0V Power Supply 0.4GHz to
RFPA V 2.4GHz to 2.5GHz Matched Power Amplifier
5.0V 2.4GHz to 2.5GHz Matched Power Amplifier Package: Laminate, 14-pin,7mm x 7mm x 1mm VCC 1 14 VCC3 PA_EN 2 13 Features P OUT = 29dBm; EVM = 3%; 11n MCS7 HT40 Input and Output Matched to 50Ω High Gain:
SKY : 2.4 GHz Transmit/Receive Front-End Module with Integrated LNA
DATA SHEET SKY65336-11: 2.4 GHz Transmit/Receive Front-End Module with Integrated LNA Applications 2.4 GHz ISM band radios ZigBee FEMs IEEE 802.15.4 applications Features Transmit output power > +20 dbm
SGA4586Z DC to 4000MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER
DC to 4MHz, Cascadable SiGe HBT MMIC Amplifier DC to 4MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER Package: SOT-86 Product Description The is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration
TQM679002A Data Sheet
Block Diagram Rxp Rxn PABC PAEN Tx in Pdetect BTH Balun Product Description PA Directional Detector BTSW RXSW TXSW ANT The TQM679002A is full WLAN/BT front-end module in an ultra small 3mm x 3mm footprint
RFPA V to 5.0V, 2.4GHz to 2.5GHz Integrated PA Module
Preliminary RFPA52.V to 5.V, 2.GHz to 2.5GHz Integrated PA Module Package: Laminate, mm x mm x mm RFIN Input Bias Match Circuit PA_EN Features P OUT = 2dBm, 5V < % Dynamic EVM db Typical Gain High PAE
2.4GHZ CMOS WLAN / BT DUAL-MODE RFEIC WITH PA, LNA & SP3T
2.4GHZ CMOS WLAN / BT DUAL-MODE RFEIC WITH PA, LNA & SP3T ANT DESCRIPTION DET VMODE 1 2 3 16 15 14 13 12 11 10 RFX8425 is a pure CMOS-based, single-chip/single-die RFeIC (RF Front-end Integrated Circuit)
RF5633 SINGLE 5.0V, 3.3 TO 3.8GHZ LINEAR POWER AMPLIFIER
Single 5.0V, 3.3 to 3.8GHz Linear Power Amplifier RF5633 SINGLE 5.0V, 3.3 TO 3.8GHZ LINEAR POWER AMPLIFIER Package Style: QFN, 24-Pin, 4 mm x 4 mm x 0.9 mm Features High Gain; 34dB Supports Low Gain Mode
GHz RF Front-End Module. o C
Functional Block Diagram Features 4 High Efficient Power Amplifier: 41% at Pout= 23dBm -PA P-1dB: +21dBM Typical @ +3.3V-PA Low Noise Amplifier (NF typical 1.8dB)-LNA Low Insertion Loss:0.4dB@ 2.45GHz-Switch
DATA SHEET SE2431L: 2.4 GHz ZigBee/ Front-End Module Preliminary Datasheet. Product Description. Applications
Applications Smart Meters In-home appliances Smart thermostats Features Integrated PA with up to 24 dbm output power Integrated LNA with programmable bypass Integrated antenna switching with Tx and Rx
SKY LF: GHz Two-Way, 0 Degrees Power Divider
DATA SHEET SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider Applications TD-LTE systems Satellite communications 2.4 GHz ISM band Features Low insertion loss: 0.3 db @ 2.5 GHz High isolation:
SGA2386ZDC to 5000MHz, Cascadable. SiGe HBT. MMIC Amplifier. Frequency (GHz) 2800 MHz >10dB 97 C/W
DC to 5MHz, Cascadable SiGe HBT MMIC Amplifier DC to 5MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER Package: SOT-86 Product Description The is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration
Preliminary C0.25 VDD N/C RF1 N/C N/C. Product Description. Ordering Information
RFSA74 Parallel Controlled Digital Step Attenuator 5MHz to 4MHz, 7-Bit,.5dB LSB Package Style: QFN 4-Pin, 4mm x 4 mm Features C.5 C C C4 C8 C6 4 3 9 Frequency Range 5MHz to 4MHz 7-Bit, 3.75dB Range,.5dB
ADG918/ADG919. Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT Switches
Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT Switches ADG918/ FEATURES Wideband switch: 3 db @ 4 GHz Absorptive/reflective switches High off isolation (43 db @ 1 GHz) Low
RF1226 BROADBAND MEDIUM POWER DIFFERENTIAL SPDT SWITCH
BROADBAND MEDIUM POWER DIFFERENTIAL SPDT SWITCH Package Style: QFN, 12-pin, 2.0 mm x 2.0 mm x 0.55 mm Features Broadband Performance Low Frequency to 3.5 GHz Very Low Insertion Loss 0.25 db Typ at 0.90