DIN Rail & Panel Mount Solid State Relays

Transcription

1 DIN Rail & Panel Mount Solid State Relays The Global Expert in Solid State Switching Technology

2 NOVA22 Solid State Relays were developed combining technology and innovation to offer high performing solid state relays in a 22.mm industrial package. Highest power available in a 22.mm wide package The advanced design and technology used in NOVA22 products provide greater power density than any other 22. mm wide SSR in the market: 3 Amps in DIN Rail mount and 9 Amps in Panel Mount package. Wide and innovative range of connections The unique range of terminal options and configurations makes NOVA22 the most versatile solution. Relay or Contactor terminal configurations, screw or spring cage plug-in input terminals, standard or elevator screws, allowing the use of ring terminals, are all options offered within the NOVA22 family. NOVA22 Solid state relays are built with high quality components and Crydom s technology and innovation making them the most powerful and versatile solid state relays in a 22.mm package on the market today! Diverse Range of Applications NOVA22 Solid State Relays can be used in a wide range of AC and DC applications. Ideal for heating applications, NOVA22s are also suitable for motion, power and lighting applications; especially for demanding applications that require higher levels of reliability including: Industrial OEMs: Plastic Machinery, Packaging and Material Handling Equipment, Industrial Ovens, Pumps Food & Beverage: Baking Ovens, Refrigeration, Food Processing Equipment Building Equipment: HVAC&R, Lighting, Access Control Energy & Infrastructure: Renewable Energy, Water and Waste Water Treatments Transportation: Railway Vehicles, Agricultural Machinery

3 Power & Versatility in a 22.mm Package! Rated up to 3 Amps (DIN Rail Mount) and 9 Amps (Panel Mount) 6 VAC or VDC models Built-in overvoltage transient protection ID marker for easy identification LED input status indicator High I 2 t for use with circuit breakers (83A 2 sec) Zero Voltage or Instantaneous Turn-On Industry standard DIN rail mount package C-UL-US Listed, CE, and TUV certified ka SCCR Input control available in DC and AC voltage options Industry standard Panel Mount package available Relay or Contactor configuration Standard or elevator innovative output screw Screws or spring cage Input terminals Complete specifications of NOVA22 Solid State Relays available at:

4 DR22 Series AC & DC Output DIN Rail Mount Solid State Relays Ratings up to 3 Amps at 6 VAC and 3 Amps at VDC Built-in overvoltage transient protection on AC models Relay or Contactor configuration Integral heat sink eliminates the need for complex thermal calculations DBC substrate for superior thermal performance Optional "Elevator" screw suffix "W" allows the use of ring or lug type terminals 1kHz Maximum PWM frequency C-UL-US Listed and TUV approved Output Specifications (A) DR226xx DR226x3x DR226x3x DR22DU DR22D3U Operating Voltage (47-44 Hz) 48-6 V RMS 48-6 V RMS 48-6 V RMS 1- VDC 1- VDC Absolute Maximum Rating [VDC] Transient Overvoltage [Vpk] (B) - - Maxumum Off-State Leakage Rated Voltage [ma] Minimum Off-State Maximum Rated Voltage [V/μsec] - - Load Current, General Use UL8/LC A 4 C [A RMS ] Load Current, Motor Starting UL8 FLA /LC B 4 C [A RMS ] 8./4.8 14/7.6 26/ Load Current, DC General Use 4 C [ADC] Load Current, DC Motor Starting UL8 4 C [ADC] Maximum Load Current A RMS 3 A RMS 3 A RMS ADC 3 ADC Minimum Load Current (C) ma RMS ma RMS ma RMS ma ma Maximum 1 Cycle Surge Current (/6 Hz) [Apk] 286/3 716/7 129/ Maximum On-State Voltage Rated Current 1.3 Vpk 1.3 Vpk 1.3 Vpk.68 VDC.48 VDC Maximum 1/2 Cycle I² t for Fusing (/6 Hz) [A²sec] 49/37 263/ / Minimum Power Factor (at Maximum load) Maximum Surge Current [ADC] ( msec) Maximum On-State Resistance [R DS -ON] [Ohms] Maximum Pulse Width Modulation Frequency [Hz] (D) Motor Rating UL 8/IEC62314 [HP (kw)]: 1 VAC. (.37) 1 (.74) 2 (1.) - - Motor Rating UL 8/IEC62314 [HP (kw)]: 24 VAC 1. (1.1) 3 (2.2) (3.73) - - Motor Rating UL 8/IEC62314 [HP (kw)]: 48 VAC 3 (2.24) (3.7) (7.4) - - Motor Rating UL 8 [HP (kw)]: 1 VDC /3 (.2) 1/2 (.37) Input Specifications (A) DR226Axxx DR226Dxxx DR22DxxU Control Voltage Range 9-28 VAC/VDC (E) 4-32 VDC (F) 4-32 VDC Maximum Reverse Voltage VDC -32 VDC Minimum Turn-On Voltage 9 VAC/VDC 4 VDC 4 VDC Must Turn-Off Voltage VAC/VDC 1 VDC 1 VDC Minimum Input Current (for on-state) [ma] 6 11 Maximum Input Current [ma] Nominal Input Impedance [Ohms] Current Limited Current Limited Current Regulated Maximum Turn-On time msec 1/2 Cycle (G) 7 μsec Maximum Turn-Off time 3 msec 1/2 Cycle μsec General Specifications DR226xxxx DR22DxxU Dielectric Strength, Input to Output (/6 Hz) [V RMS ] 4 37 Dielectric Strength, Input/Output/Case (/6 Hz) [V RMS ] 4 2 Minimum Insulation Resistance (@ VDC) [Ohms] 9 Maximum Capacitance, Input/Output [pf] 8 Ambient Operating Temperature Range [ºC] (H) -4 to 8 Ambient Storage Temperature Range [ºC] -4 to Short Circuit Current Rating [ka] (J) - LED Input Status Indicator Green Weight (Typical) [oz] (g) Suffix "U". (298), "V"&"W" suffixes.6 (31). (298) Housing Material UL94 V- Baseplate Material Aluminum Hardware Finish Nickel Plating Humidity 8% non-condensing Part Number Nomenclature Series Operating Voltage : 1- VDC 6: 48-6 VAC DR22 6 A UV R J Required for valid part number For options only and not required for valid part number Control Voltage A: 9-28 VAC/VDC (AC Output only) D: 4-32 VDC Rated Load Current : Amps 3: 3 Amps 3: 3 Amps [High I 2 t] (AC Output only) Terminal Layout U: Relay Configuration V: Contactor Configuration (std. screw) W: Contactor Configuration (elevator screw) Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On (AC Output only) AC Output only Input Connector Blank: Screw Terminal J: Spring Terminal (V and W suffixes only) Recommended Accessories for DR22 Series Connectors ID Marker Lug Terminal CP1 CP2 CNLB CNLN CNL2 TRM TRM6

5 INPUT STATUS INPUT STATUS INPUT STATUS Mechanical Dimensions Derating Curves (H) Tolerances: ±.2 in /. mm All dimensions are in: inches [millimeters] Relay Configuration.39 [9.9] Single unit Multiple units, no minimum spacing between components DR226xx 3. [76.2] +3/A1 INPUT -4/A [47.8] 3.67 [93.2] 3.4 [9] 1/L1 2/T1 OUTPUT [22.] Contactor Configuration 1/L [47.] 1.19 [3.2] 4.9 [116.] DR226x3x Wiring Diagrams Relay Configuration AC Output (+ / ) (- / ) AC V +3/A1 1/L1-4/A2 2/T1 Load 2.8 [72.3] 2/T1 +3/A1-4/A2.89 [22.] 1.88 [47.8] 3.62 [91.9] Contactor Configuration AC Output Load 1/L1 2/T1 V AC +3/A1-4/A2 Elevator Screw (Suffix "W") 1.19 [3.2] (+ / ) (- / ) 4.9 [116.] The Elevator Screw option allows the screw and clamp to be raised out of the mating threads completely. This provides for the insertion and use of a ring or lug type wire terminal. See datasheet for Compatible Terminals. 3.4 [9] Relay Configuration DC Output (K) (+) (-) +3/A V - -4/A2 General Notes -2 + Load (L) DR226x3x DR22DU DR22D3U (A) All parameters at 2ºC unless otherwise specified. (B) Output will self trigger between 9- Vpk. Not suitable for capacitive loads. (C) Low current loads and high ambient temperature can affect turn-on time. (D) 8 VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 7% output current. Recommended suppressor diode connected at load side, see wiring diagram. (E) Above 4ºC ambient temperature the maximum control voltage must not exceed 2 VAC/VDC. (F) Increase minimum voltage by 1 V for operations from - to -4ºC. (G) Turn-On Time for Instantaneous Turn-On versions is.1 msec. (H) Operating range - to 6ºC for AC control models only. (J) With appropriate class and rated fuse, see product datasheet for detailed info (K) Load can be wired to either terminal 1 or terminal 2. Proper polarity must be observed for the DC control power supply, with terminal 3 being positive with respect to terminal 4. (L) DC inductive loads must be diode suppressed. Complete specifications of these & other Crydom products available at:

6 PM22 Series AC Output Panel Mount Solid State Relays Ratings up to 9 Amps at 6 VAC Built-in overvoltage transient protection DBC substrate for superior thermal performance LED input status indicator IP touch safe housing AC or DC control voltage options 4 VAC optical isolation C-UL-US Recognized and TUV approved Output Specifications (A) PM226x2x PM226xx PM226x9x Operating Voltage (47-44 Hz) [V RMS ] Transient Overvoltage [Vpk] (B) Maxumum Off-State Leakage Rated Voltage [ma RMS ] Minimum Off-State Maximum Rated Voltage [V/μsec] Load Current, General Use UL8/LC A IEC 4 C [A RMS ] (M) 2 9 Load Current, Motor Starting UL8 FLA /LC B IEC 4 C [A RMS ] (M) 8./4.8 14/7.6 26/14 Minimum Load Current [ma RMS ] Maximum 1 Cycle Surge Current (/6 Hz) [Apk] 286/3 716/7 129/13 Maximum On-State Voltage Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [ºC/W] Maximum 1/2 Cycle I² t for Fusing (/6 Hz) [A²sec] 49/37 263/ /793 Minimum Power Factor (at Maximum load)... Minimum Heat sink for Rated 4ºC Motor Rating UL 8/IEC62314 [HP (kw)]: 1 VAC. (.37) 1 (.74) 2 (1.) Motor Rating UL 8/IEC62314 [HP (kw)]: 24 VAC 1. (1.1) 3 (2.2) (3.73) Motor Rating UL 8/IEC62314 [HP (kw)]: 48 VAC 3 (2.24) (3.7) (7.4) Input Specifications (A) PM226Axx PM226Dxx Control Voltage Range 9-28 VAC/VDC (E) 4-32 VDC (F) Maximum Reverse Voltage VDC Minimum Turn-On Voltage 9 VAC/VDC 4 VDC Must Turn-Off Voltage VAC/VDC 1 VDC Minimum Input Current (for on-state) [ma] 6 Maximum Input Current [ma] Nominal Input Impedance [Ohms] Current Limited Current Limited Maximum Turn-On time msec 1/2 Cycle (G) Maximum Turn-Off time 3 msec 1/2 cycle General Specifications PM226xxx Dielectric Strength, Input to Output (/6 Hz) [V RMS ] 4 Dielectric Strength, Input/Output/Case (/6 Hz) [V RMS ] 4 Minimum Insulation Resistance (@ VDC) [Ohms] 9 Maximum Capacitance, Input/Output [pf] 8 Ambient Operating Temperature Range [ºC] (H) -4 to 8 Ambient Storage Temperature Range [ºC] -4 to Short Circuit Current Rating [ka] (J) LED Input Status Indicator Green Weight (Typical) [oz] (g) 2.3 (64) Housing Material UL94 V- Baseplate Material Aluminum Hardware Finish Nickel Plating Humidity 8% non-condensing Part Number Nomenclature Series Operating Voltage 6: 48-6 VAC Rated Load Current 2: 2 Amps : Amps 9: 9 Amps [High I 2 t] PM22 6 A 2 UV R Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On J UH Thermal Pad Blank: Not Included H: Included Mechanical Dimensions Tolerances: ±.2 in /. mm All dimensions are in: inches [millimeters] 1/L [47.] Control Voltage (N) A: 9-28 VAC/VDC D: 4-32 VDC Terminal Layout V: Contactor Configuration Input Connector Blank: Screw Terminal J: Spring Terminal 2.8 [72.3] +3/A1-4/A [47.8] 3.62 [91.9] Required for valid part number For options only and not required for valid part number 2/T1.89 [22.] 1.19 [3.2] Questions? America Tel.: +1 (877) 2 EMEA Tel.: +44 () Asia Tel.: +86 () Call or sales@crydom.com sales-cn@crydom.com

7 Derating Curves (H) 2 PM226x2V 2ºC/W 3ºC/W ºC/W PM226xV.7ºC/W 1ºC/W 2.ºC/W PM226x9V.2ºC/W.36ºC/W.ºC/W 2.ºC/W Recommended Accessories for PM22 Series New Accessories! Connectors CP1 CP2 ID Marker CNLB CNLN CNL2 Hardware Kit HK8 Heat Sink Part No. HS31 / HS31DR HS21 HS29DR HS2 / HS2DR HS1 / HS1DR HS172 HS1 / HS1DR HS122 / HS122DR HS3 / HS3DR HS1 HS73 HS72 HS3 HS33 HS23 Thermal Resistance [ºC/W] Thermal Pad HSP-7 Connectors Part number: CP1, CP2 Pluggable input connectors, 2 position, with screw terminals (CP1) or spring type terminals(cp2). Compatible with Contactor configuration NOVA22 SSRs. Hardware Kit Part number: HK8 Bag with 2 SSR mounting screws 8-32 x 3/8, Hex Socket Cap, compatible with PM22 Series Panel Mount SSRs. Used to mount the SSR onto any of our compatible heat sinks. Heat Sink Part number: HS29DR DIN Rail mountable heat sink with 2. C/W thermal resistance. Heat sink material is aluminum with black anodized finish. Suitable for mounting a single PM22 Series Panel Mount SSR. Lug Terminal Part number: TRM Copper wire lug for AWG 6 (13.3 mm²) to AWG (3. mm²) wire size. For use with "Elevator" screw option ("W" suffix) NOVA22 SSRs. General Notes (A) All parameters at 2ºC unless otherwise specified. (B) Output will self trigger between 9- Vpk. Not suitable for capacitive loads. (E) Above 4ºC ambient temperature the maximum control voltage must not exceed 2 VAC/VDC. (F) Increase minimum voltage by 1 V for operations from - to -4ºC. (G) Turn-On Time for Instantaneous Turn-On versions is.1 msec. (H) Operating range - to 6ºC for AC control models only. (M) Heat sink required, see derating curves. (N) Control voltage 18-2 VAC/VDC is available upon request. Thermal Pad Part number: HSP-7 Non-adhesive thermal pad for half-puck package SSRs. Compatible with PM22 Series Panel Mount SSRs. Crydom, global expert in solid state switching technology, combines technology and innovation to provide customers a wide range of standard Solid State Relays and Solid State Contactors, and specializes in custom designed solid state switching solutions for any load control application. Crydom is a brand of. is a global specialist in designing and manufacturing sensors, controls and actuators. Through its brands, BEI Kimco, BEI Sensors, BEI PSSC, Crouzet, Crydom, Kavlico, Newall and Systron Donner Inertial, CST offers a wide range of reliable and efficient components dedicated to the Aerospace & Defense, Transportation, Industrial, Medical and Energy & Infrastructure markets. Through the expertise, diversity and agility of its 4,4 employees worldwide, CST is focused on the satisfaction of its customers. Committed to excellence, with sales of $9M US in 14, CST is the dependable and adaptable partner for the most demanding applications.

8 AMERICAS United States & Canada 23 Paseo de las Americas, Suite 1 San Diego, CA 924 Sales Support: Tel.: +1 (877) 2 Fax: +1 (619) 2 9 sales@crydom.com Technical Support: Tel.: +1 (877) support@crydom.com Mexico Calzada Zavaleta 2-C Col Sta Cruz Buenavista C.P Puebla Sales Support: Tel. : +2 (222) 49 7 Fax : +2 (222) sales-mx@crydom.com Southern & Central Tel.: +1 (877) 2 Fax: +1 (619) 2 9 EUROPE, MIDDLE EAST & AFRICA United Kingdom Everdene House, Deansleigh Road Wessex Fields, Bournemouth, Dorset BH7 7DU Sales Support Tel.: +44 () Fax: +44 () Technical Support support-europe@crydom.com Austria & Switzerland Tel.: +44 () Fax: +44 () vertrieb@crydom.com Belgium Tel.: +32 () Fax: +32 () France Tel.: +33 () Fax: +33 () Germany Tel.: +49 () Fax: +49 () vertrieb@crydom.com Italy Tel.: +39 () Fax: +39 () Spain Tel.: Fax: Netherlands Tel.: +31 () Fax: +31 () Middle East, Africa & Other European Countries Tel. : +44 () Fax: +44 () ASIA China 11th floor Chang Feng International Tower 89 Yunling Road (East) Putuo District Shanghai, 62 Sales Support Tel.: +86 (21) Fax: +86 (21) sales-cn@crydom.com Technical Support support-cn@crydom.com South Korea 14F, Kbiz DMC Tower, 189, Seongam-ro, Mapo-gu, Seoul , South Korea Tel.: Fax: korea@cstsensors.com India 4th Floor, Trident Towers, No. 23, Ft- Ashoka Pillar Road, 2nd Block, Jayanagar, Bangalore- 611 Tel: +91 (8) / Fax: +91 (8) india@cstsensors.com East Asia Pacific /F, Wharf T & T Centre, Harbour City, 7 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel.: Fax: eap@cstsensors.com Crydom Inc., All Rights Reserved. CAT/CR/NV/EN Specifications are subject to change without prior notice. Crydom and the Crydom logo are registered trademarks of Crydom Inc. Distributed by : / Rev.16