Advance Information. Conditions < ±4% < ±6% I OUT = 10 ma to 60 ma, V DS = 0.6V < ±6% < ±12% I OUT = 60 ma to100 ma, V DS = 0.8V
|
|
- Noreen Cannon
- 5 years ago
- Views:
Transcription
1 Features Macroblock Advance Information CN 5001CN MBI5001CN 8 constant-current output channels Constant output current invariant to load voltage change Excellent output current accuracy: between channels: < ±4% (max.), and between ICs: < ±6% (max.) Output current adjusted through an external resistor Constant output current range: ma Fast response of output current, / (min.): 400 ns 25MHz clock frequency Schmitt trigger input 5V supply voltage DIP16-P CD BI5001CD SOP16-P CP Weight: 1.02g(typ) Weight: 0.13g(typ) SSOP16-P Weight: 0.07g(typ) Current Accuracy Between Channels Between ICs Conditions < ±4% < ±6% I OUT = 10 ma to 60 ma, V DS = 0.6V < ±6% < ±12% I OUT = 60 ma to100 ma, V DS = 0.8V Product Description is designed for D displays. As an enhancement of its predecessor, MBI5001, exploits PrecisionDrive technology to enhance its output characteristics. contains a serial buffer and data latches which convert serial input data into parallel output format. At output stage, eight regulated current ports are designed to provide uniform and constant current sinks for driving Ds within a large range of Vf variations. provides users with great flexibility and device performance while using in their system design for D display applications, e.g. D panels. Users may adjust the output current from 5 ma to 120 ma through an external resistor, R ext, which gives users flexibility in controlling the light intensity of Ds. guarantees to endure maximum 17V at the output port. The high clock frequency, 25 MHz, also satisfies the system requirements of high volume data transmission. Macroblock, Inc Floor 6-4, No.18, Pu-Ting Rd., Hsinchu, Taiwan 30077, ROC. TEL: , FAX: info@mblock.com.tw This datasheet has been downloaded from at this page
2 Terminal Description Pin Description PIN NO. PIN NAME FUNCTION 1 GND Ground terminal for control logic and current sink 2 SDI Serial-data input to the shift register 3 CLK 4 Clock input terminal for data shift on rising edge Data strobe input terminal Serial data is transferred to the respective latch when is high. The data is latched when goes low. GND SDI CLK OUT 0 OUT 1 OUT 2 OUT VDD R-EXT OUT 7 OUT 6 OUT 5 OUT OUT0 ~ OUT 7 Constant current output terminals Output enable terminal R-EXT When (active) low, the output drivers are enabled; when high, all output drivers are turned OFF (blanked). Serial-data output to the following SDI of next driver IC Input terminal used to connect an external resistor for setting up output current for all output channels 16 VDD 5V supply voltage terminal Block Diagram OUT0 OUT1 OUT6 OUT7 R-EXT I O Regulator VDD 8-Bit Output Driver 8 8-Bit Output Latch GND 8 SDI 8-Bit Shift Register CLK - 2 -
3 Equivalent Circuits of Inputs and Outputs terminal terminal VDD VDD CLK, SDI terminal VDD terminal VDD CLK, SDI - 3 -
4 Timing Diagram N = CLK SDI OUT0 OUT 1 OUT2 OUT3 OFF ON OFF ON OFF ON OFF ON OUT6 OUT 7 OFF ON OFF ON : don t care - 4 -
5 Truth Table CLK SDI OUT0 OUT5 OUT 7 H L D n D n.. D n - 5. D n - 7 D n-7 L L D n+1 No Change D n-6 H L D n+2 D n + 2. D n - 3. D n - 5 D n-5 X L D n+3 D n + 2. D n - 3. D D n - 5 n-5 X H D n+3 Off D n-5 Maximum Ratings CHARACTERISTIC SYMBOL RATING UNIT Supply Voltage V DD 0~7.0 V Input Voltage V IN -0.4~V DD V Output Current I OUT +120 ma Output Voltage V DS -0.5~+20.0 V Clock Frequency F CLK 25 MHz GND Terminal Current I GND 960 ma Power Dissipation (On PCB, Ta=25 C) Thermal Resistance (On PCB, Ta=25 C) CN type 1.64 CD type 1.06 CP type P D 0.88 CN type 76 CD type 117 CP type R th(j-a) Operating Temperature T opr -40~+85 C Storage Temperature T stg -55~+150 C 141 W C/W - 5 -
6 Recommended Operating Conditions CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT Supply Voltage V DD V Output Voltage V DS OUT0 ~ OUT V Output Current Input Voltage I OUT DC Test Circuit ma I OH ma I OL ma V IH CLK,, and SDI 0.8V DD - V DD +0.3 V V IL CLK,, and SDI V DD V Pulse Width t w(l) ns CLK Pulse Width t w(clk) ns Pulse Width t w() ns Setup Time for SDI t su(d) V DD =4.5~5.5V ns Hold Time for SDI t h(d) ns Setup Time for t su(l) ns Hold Time for t h(l) ns Clock Frequency F CLK Cascade Operation MHz Power Dissipation P D Ta=85 C W - 6 -
7 Electrical Characteristics CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT Input Voltage H level V IH Ta = -40~85ºC 0.8V DD - V DD V L level V IL Ta = -40~85ºC GND - 0.3V DD V Output Leakage Current I OH V OH =17.0V μa Output Voltage V OL I OL =+1.0mA V V OH I OH =-1.0mA V Output Current 1 I OUT1 V DS =0.6V R ext =744 Ω ma Current Skew di OUT1 I OUT =25mA V DS =0.6V R ext =744 Ω - ±1 ±4 % Output Current 2 I OUT2 V DS =0.6V R ext =372 Ω ma Current Skew di OUT2 I OUT =50mA V DS =0.6V R ext =372 Ω - ±1 ±4 % Output Current 3 I OUT3 V DS =0.8V R ext =186 Ω ma Current Skew Output Current vs. Output Voltage Regulation Output Current vs. Supply Voltage Regulation di OUT3 I OUT =100mA V DS =0.8V R ext =186 Ω - ±1 ±6 % %/dv DS V DS within 1.0V and 3.0V - ±0.1 - % / V %/dv DD V DD within 4.5V and 5.5V - ±1 - % / V Pull-up Resistor R IN (up) KΩ Pull-down Resistor R IN (down) KΩ Supply Current OFF ON Test Circuit for Electrical Characteristics I DD (off) 1 R ext =Open, OUT0 ~ OUT 7 =Off I DD (off) 2 R ext =744 Ω, OUT0 ~ OUT 7 =Off I DD (off) 3 R ext =372 Ω, OUT0 ~ OUT 7 =Off I DD (on) 1 R ext =744 Ω, OUT0 ~ OUT 7 =On I DD (on) 2 R ext =372 Ω, OUT0 ~ OUT 7 =On ma I DD I IH,IIL CLK V DD. OUT0 I OUT OUT7 V IH, VIL SDI R - EXT GND I ref - 7 -
8 Switching Characteristics CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT Propagation Delay Time ( L to H ) Propagation Delay Time ( H to L ) Pulse Width CLK - OUTn t plh ns - OUTn t plh ns - OUTn t plh ns CLK - t plh ns CLK - OUTn t phl1 V DD =5.0 V V DS =0.8 V ns - OUTn t phl2 V IH =V DD ns V IL =GND - OUTn t phl3 R ext =366 Ω ns CLK - t phl V L =4.0 V R L =52 Ω ns CLK t w(clk) C L =10 pf ns t w(l) ns t w() ns Hold Time for t h(l) ns Setup Time for t su(l) ns Maximum CLK Rise Time t r ** ns Maximum CLK Fall Time t f ** ns Output Rise Time of Iout t or ns Output Fall Time of Iout t of ns **If the devices are connected in cascade and t r or t f is large, it may be critical to achieve the timing required for data transfer between two cascaded devices. Test Circuit for Switching Characteristics I DD VIH = 5V Function Generator Logic input waveform V IH, VIL CLK SDI I ref V DD OUT0. OUT7 R - EXT GND C L I OUT R L C L V L VIL = 0V t r = tf = 10 ns - 8 -
9 Timing Waveform t W(CLK) CLK t su(d) t h(d) SDI t plh, t phl t W(L) t h(l) t su(l) LOW = OUTPUTS ENABD HIGH = OUTPUT OFF OUTn t plh1, t phl1 t plh2, t phl2 LOW = OUTPUT ON t W() t phl3 t plh3 OUTn 90% 90% 10% 10% t of t or - 9 -
10 Application Information Constant Current To design D displays, provides nearly no variations in current from channel to channel and from IC to IC. This can be achieved by: 1) While I OUT is 60mA, the maximum current variation between channels is less than ±4%, and that between ICs is less than ±6%. 2) In addition, the current characteristic of output stage is flat and users can refer to the figure as shown below. The output current can be kept constant regardless of the variations of D forward voltages (Vf). This performs as a perfection of load regulation. Adjusting Output Current The output current of each channel (I OUT ) is set by an external resistor, R ext. The relationship between I out and R ext is shown in the following figure. I OUT (ma) V DS = 1.0V Resistance of the external resistor, R ext, in Ω Also, the output current in milliamps can be calculated from the equation: I OUT is (620 / R ext ) x 30, approximately, where R ext, in Ω, is the resistance of the external resistor connected to R-EXT terminal. The magnitude of current (as a function of R ext ) is around 50mA at 372Ω and 25mA at 744Ω
11 Package Power Dissipation (P D ) The maximum allowable package power dissipation is determined as P D (max) = (Tj Ta) / R th(j-a). When 16 output channels are turned on simultaneously, the actual package power dissipation is P D (act) = (I DD x V DD ) + (I OUT x Duty x V DS x 8). Therefore, to keep P D (act) P D (max), the allowable maximum output current as a function of duty cycle is: I OUT = { [ (Tj Ta) / R th(j-a) ] (I DD x V DD ) } / V DS / Duty / 8, where Tj = 150 C. Load Supply Voltage (V D ) are designed to operate with V DS ranging from 0.4V to 1.0V considering the package power dissipating limits. V DS may be higher enough to make P D(act) > P D(max) when V D = 5V and V DS = V D Vf, in which V D is the load supply voltage. In this case, it is recommended to use the lowest possible supply voltage or to set an external voltage reducer, V DROP. A voltage reducer lets V DS = (V D Vf) V DROP. Resistors or Zener diode can be used in the applications as shown in the following figures. V D V D V DROP V DROP Vf Vf V DS V DS
12 Outline Drawings CN DIP-16-P Units: mm Weight: 1.02g (typ) CD SOP-16-P Units: mm Weight: 0.13g (typ) CP SSOP-16-P Units: mm Weight: 0.07g (typ)
Advance Information. Current Accuracy Conditions
Macroblock Advance Information MBI5025 Features MBI5025CN/CNS MBI5016CNS 16 constant-current output channels Constant output current invariant to load voltage change: Constant output current range: 3-50
More informationPreliminary Datasheet. Conditions. I OUT = 10 ~ 100 ma, V DS = 0.8V
Macroblock Preliminary Datasheet Features CN MBI5001CN 8 constant-current output channels Constant output current invariant to load voltage change Excellent output current accuracy: between channels:
More informationDatasheet. Conditions. I OUT = 10 ~ 100 ma, V DS = 0.8V, V DD = 5.0V
Macroblock Datasheet MBI5168 Features 8 constant-current output channels Constant output current invariant to load voltage change Excellent output current accuracy: between channels: < ±3% (max.), and
More informationPreliminary Datasheet. Macroblock 16-channel Constant Current LED Sink Driver
Preliminary Datasheet Macroblock Features 16 constant-current output channels Constant output current invariant to load voltage change: Constant output current range: 3-45 ma @ V DD = 5V; 3-30 ma @ V DD
More informationDatasheet. Conditions
Features Macroblock Datasheet 16 constant-current output channels Constant output current invariant to load voltage change Excellent output current accuracy: between channels:
More informationDatasheet. Conditions
Features Macroblock Datasheet 16 constant-current output channels Constant output current invariant to load voltage change Excellent output current accuracy: between channels:
More informationPreliminary Datasheet. All-Ways-On TM
Macroblock Preliminary Datasheet All-Ways-On TM MBI1816 6 Constant-Current LED Driver Features 16 constant-current output channels Constant output current invariant to load voltage change Excellent output
More informationDatasheet. Conditions
Macroblock Datasheet 8-Bit Constant Current LED Sink Driver with Gain Control Features Compatible with MBI5168 in package and electrical characteristics Exploit Share-I-O technique to provide two operation
More informationDatasheet. Macroblock 16-channel Constant Current LED Sink Driver. I OUT DS =0.8V; V DD =3.3V I OUT DS =0.8V; V DD =5.
Features Datasheet Macroblock 16 constant-current output channels Constant output current invariant to load voltage change: Constant output current range: 3-45mA@V DD =5V; 3-30mA@V DD =3.3V Excellent output
More informationDatasheet. Conditions. I OUT = 10 ~ 100 ma, V DS = 0.8V, V DD = 5.0V
Macroblock Datasheet Features Compatible with MBI5168 in electrical characteristics and package Exploiting Share-I-O technique to provide two operation modes: - Normal Mode with the same functionality
More informationDatasheet. Macroblock 16-Channel Constant Current LED Sink Driver
Features Datasheet Macroblock Small Outline Package 16 constant-current output channels Constant output current invariant to load voltage change: Constant output current range: 1-45mA@V DD =5V; 1-30mA@V
More informationDatasheet. I OUT DS =0.7V; V DD =3.3V I OUT DS =0.7V; V DD =5.0V
Macroblock Datasheet MBI5024 Features Small Outline Package 16 constant-current output channels Constant output current invariant to load voltage change: Constant output current range: 3-45mA@V DD =5V;
More informationPreliminary Datahseet
Features Macroblock Preliminary Datahseet 3-Channel Constant-Current Sink Driver s 3 constant-current channels for RGB each Output current invariant to load voltage change Maximum output current per channel:
More informationPreliminary Datasheet
Preliminary Datasheet Macroblock 4-Channel All-Ways-On TM MBI1824 Constant Current LED Driver Features Maximum 50V output sustaining voltage 4 constant-current output channels Constant output current invariant
More informationPreliminary Datasheet. Macroblock 16-Channel Constant Current LED Driver With Silent Error Detection and Power Saving Modes
Features Preliminary Datasheet Macroblock 16-Channel Constant Current LED Driver With Silent Error Detection and Power Saving Modes Package compatible with MBI5026 16 constant-current output channels Constant
More informationStarChips. Technology. SCT2110 V03_01; Mar/08. 8-bit Serial-In/Parallel. Constant-Current Current LED Driver Product Description.
StarChips Technology V03_01; Mar/08 8-bit Serial-In/Parallel In/Parallel-Out Constant-Current Current LED Driver Product Description The serial-interfaced LED driver sinks 8 LED clusters with constant
More informationMBI1816. Macroblock All-Ways-On TM. Constant-Current LED Driver. Features. Product Description. Applications. Datasheet
Macroblock All-Ways-On TM Datasheet MBI1816 Constant-Current LED Driver Features 16 constant-current output channels Constant output current invariant to load voltage change Excellent output current accuracy:
More informationStarChips. Technology. SCT2026 V02_01; Jan/08. In/Parallel Product Description. Features. Pin Configurations
StarChips Technology V02_01; Jan/08 16-bit Serial-In/Pa In/Parallel rallel-out Constant-Current Current LED Driver Product Description The serial-interfaced LED driver sinks 16 LED clusters with constant
More informationDatasheet. All-Ways-On TM. Conditions. I OUT = 40mA ~ 360 V DS = 0.6V
Macroblock Datasheet All-Ways-On TM MBI1802 High-Power LED Driver Features 2 constant-current output channels Constant output current invariant to load voltage change Maximum output constant current per
More informationPreliminary Datasheet. Macroblock 16-Channel Constant Current LED Sink Driver with Error Detection and Current Gain
-Features Preliminary Datasheet MBI5039 Macroblock Error Detection and Current Gain 16 constant-current output channels Constant output current range: - 5-90mA @ 5V supply voltage - 3-70mA @ 3.3V supply
More informationPreliminary Datasheet
Preliminary Datasheet MBI5124 Features 16 Channel Constant Current LED Driver with Ghosting Elimination 16 constantcurrent output channels Constant output current invariant to load voltage change: Constant
More informationCONSTANT CURRENT LED DRIVER IK2816
TECHNICAL DATA CONSTANT CURRENT LED DRIVER IK2816 FEATURES 16 constant-current output channels Constant output current invariant to load voltage change Excellent output current accuracy: between channels:
More informationTechnology. SCT2004 V02_01; May/09. 4-Channel. Constant Current Driver. Product Description. Features
StarChips Technology 4-Channel Constant Current Driver Product Description V02_01; May/09 The is a four channels constant current driver best for LED lighting. It provides the PWM control effect by sinking
More informationPreliminary Datasheet
Features Macroblock Preliminary Datasheet Backward compatible with MBI5026 and MBI5030 in package 16 constant-current output channels 16-bit color depth PWM control Scrambled-PWM technology to improve
More informationMBI5030. Macroblock. 16-Channel Constant Current LED Driver With 16-bit PWM Control. Features. Product Description. Datasheet
Features Macroblock Datasheet Backward compatible with MBI5026 in package 16 constant-current output channels 16-bit/12-bit color depth PWM control Scrambled-PWM technology to improve refresh rate Compulsory
More informationSTP16CL596 LOW VOLTAGE 16-BIT CONSTANT CURRENT LED SINK DRIVER
LOW VOLTAGE 16-BIT CONSTANT CURRENT LED SINK DRIVER LOW VOLTAGE POWER SUPPLY DOWN TO 3V 16 CONSTANT CURRENT OUTPUT CHANNELS ADJUSTABLE OUTPUT CURRENT THROUGH EXTERNAL RESISTOR SERIAL DATA IN/PARALLEL DATA
More informationSTP08CL596 LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER
LOW VOLTAGE 8-BIT CONSTANT CURRENT LED SINK DRIVER LOW VOLTAGE POWER SUPPLY DOWN TO 3V 8 CONSTANT CURRENT OUTPUT CHANNELS ADJUSTABLE OUTPUT CURRENT THROUGH EXTERNAL RESISTOR SERIAL DATA IN/PARALLEL DATA
More informationRGB LED Cluster Driver Data sheet
RGB LED Cluster Driver Data sheet 2013/12/17 3 channel 16 bit PWM Constant Current Driver Features 3 adjustable constant current sink channel 16 bit high resolution PWM output Built-in 60MHz PWM oscillator
More informationUNISONIC TECHNOLOGIES CO., LTD L16B06 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD L16B06 Preliminary CMOS IC 16-BIT CONSTANT CURRENT LED DRIVER DESCRIPTION The L16B06 is a constant-current sink driver specifically designed for LED display applications.
More informationLow current consumption : 0.4 ma typ. Driver output current : 70 ma max. 5 MHz (cascade connection) Selectable H/L for latch and driver enable
The is a CMOS thermal print head driver containing a 64-bit shift register and a latch. It can be used for general purpose because H or L can be selected for the latch and the driver enable. It is ideal
More informationTB62726ANG,TB62726AFG
TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62726ANG,TB62726AFG 16-bit Constant-Current LED Driver with Operating Voltage of 3.3-V and 5-V The TB62726A series are comprised of constant-current
More informationLow voltage 8-bit constant current LED sink with full outputs error detection. Order codes Package Packaging
Low voltage 8-bit constant current LED sink with full outputs error detection Features DIP-16 TSSOP16 Low voltage power supply down to 3 V 8 constant current output channels Adjustable output current through
More informationPreliminary Datasheet
Preliminary Datasheet MBI5252 Features for 1:16 Time-Multiplexing Applications 3V-5.5V supply voltage 16 constant current output channels Constant output current range: - 0.5~20mA @ 5V supply voltage -
More informationIS31FL3726 IS31FL CHANNEL COLOR LED DRIVER. June 2018
16-CHANNEL COLOR LED DRIVER GENERAL DESCRIPTION The IS31FL3726 is comprised of constant-current drivers designed for color LEDs. The output current value can be set using an external resistor. The output
More informationConstant Current Driver Product Description
StarChips Technology 8-Channel Constant Current Driver Product Description V02_02; Nov/12 The is an eight channels constant current driver best for LED lighting. It provides the PWM control effect by sinking
More information16-BIT SERIAL-INPUT, CONSTANT- CURRENT LATCHED LED DRIVER
Data Sheet 26185.21 6276 CONSTANT- CURRENT GROUND SERIAL DATA IN 1 2 A6276ELW V DD I O REGULATOR 24 23 LOGIC SUPPLY R EXT The A6276EA and A6276ELW are specifically designed for LEDdisplay applications.
More informationIS31FL BIT COLOR LED DRIVER WITH PWM CONTROL June 2013
16-BIT COLOR LED DRIVER WITH PWM CONTROL June 2013 GENERAL DESCRIPTION The IS31FL3726 is comprised of constant-current drivers designed for color LEDs. The output current value can be set using an external
More information3-channel Constant Current LED Driver
3-channel Constant Current LED Driver (V2.2) TERALANE SEMICONDUCTOR INC. ADDRESS:7th Floor,Building 3,China Academy of Science and Technology Development,Gaoxin South Road 1, Nanshan District,Shenzhen,P.R.china
More informationObsolete Product(s) - Obsolete Product(s)
Low voltage 16-Bit, constant current LED sink driver Features Low voltage power supply down to 3V 16 constant current output channels Adjustable output current through external resistor Serial data IN/parallel
More informationPreliminary Datasheet. Macroblock 16-Channel SPWM Constant Current LED Driver with Lower Ghosting Effect Elimination
Features Preliminary Datasheet MBI5043 Macroblock 16 constantcurrent output channels 16bit color depth PWM control ScrambledPWM technology to improve refresh rate 6bit programmable output current gain
More informationGeneral Lighting LED Driver Data sheet. 8 Channel High Power Constant Current LED Driver
General Lighting LED Driver Data sheet 2010/10/04 8 Channel High Power Constant Current LED Driver Features 20mA~150mA, 8 channels constant current regulator Output current adjustable by external resistor
More information8-bit shift register and latch driver
8-bit shift register and latch driver The BU2114 and BU2114F are CMOS ICs with low power consumption, and are equipped with an 8-bit shift register latch. Data in the shift register can be latched asynchronously.
More informationTB62747AFG,TB62747AFNG, TB62747AFNAG,TB62747BFNAG
TOSHIB Bi-CMOS Integrated Circuit Silicon Monolithic TB62747FG,TB62747FNG, TB62747FNG,TB62747BFNG 16-Output Constant Current LED Driver The TB62747 series is comprised of constant-current drivers designed
More informationOrder codes Package Packaging
Low voltage, low current power 8-bit shift register Features Low voltage power supply down to 3 V 8 constant current output channels Adjustable output current through external resistor Serial data IN/parallel
More informationA Bit Serial Input, Constant-Current Latched LED Driver
Features and Benefits Up to 9 ma constant-current outputs Undervoltage lockout Low-power CMOS logic and latches High data input rate Functional replacement for TB6276BN/BF Packages Not to scale 24-pin
More informationSTP16CPS05. Low voltage 16-Bit constant current LED sink driver with auto power saving. Features. Description. Order codes
Low voltage 16-Bit constant current LED sink driver with auto power saving Features Low voltage power supply down to 3V 16 constant current output channels Adjustable output current through external resistor
More informationICN2053. (16-Channel PWM Constant Current LED Sink Driver)
ICN2053 (16-Channel PWM ) Description The ICN2053 is a 16-channel PWM constant current sink output LED driver for 1:32 time multiplexing applications. The constant-current value of all 16 channels is set
More informationLast Time Buy. Deadline for receipt of LAST TIME BUY orders: April 30, 2011
Last Time Buy This part is in production but has been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently
More informationOrder codes Package Packaging
Low voltage 16-bit constant current LED sink driver Datasheet production data Features 16 constant current output channels Adjustable output current through external resistor Output current: 5 ma to 90
More information16-bit Constant Current LED Driver with Error Detection
: _ENG_V11 Version Issue Date : 2008/05/08 File Name : _ENGpdf Total Pages : 20 16-bit Constant Current LED Driver with Error Detection 16-bit Constant Current LED Driver with Error Detection General Description
More informationLow voltage 16-bit constant current LED sink driver with output error detection and auto power-saving for automotive applications.
Low voltage 16-bit constant current LED sink driver with output error detection and auto power-saving for automotive applications Description Datasheet - production data The STAP16DPS05 is a monolithic,
More informationDM134 DM135 DM Bit Constant Current LED Drivers. Version : A.013 Issue Date : 2006/8/1 File Name Total Pages : 20. : SP-DM134,135,136-A.013.
Version : A.013 Issue Date : 2006/8/1 File Name Total Pages : 20 : SP-DM134,135,136-A.013.doc 16-Bit Constant Current LED Drivers 新竹市科學園區展業一路 9 號 7 樓之 1 9-7F-1, Prosperity Road I, Science Based Industrial
More informationOrder codes Package Packaging
Low voltage 8-bit constant current LED sink with full outputs error detection Features Low voltage power supply down to 3 V 8 constant current output channels Adjustable output current through external
More informationSN bit Color LED Driver with PWM Control. Description. Features. Application Cellular phones MP3/MP4/CD/minidiskplayers Toys.
16-bit Color LED Driver with PWM Control Description The is comprised of constant-current drivers designed for color LEDs. The output current value can be set using an external resistor. The output current
More informationLow voltage 16-bit constant current LED sink driver with auto power-saving. Description
Low voltage 16-bit constant current LED sink driver with auto power-saving Datasheet - production data Features Low voltage power supply down to 3 V 16 constant current output channels Adjustable output
More informationOrder codes Package Packaging
Low voltage 16-bit constant current LED sink driver Features Low voltage power supply down to 3 V 16 constant current output channels Adjustable output current through external resistor Serial data IN/parallel
More informationQS54/74FCT373T, 2373T. High-Speed CMOS Bus Interface 8-Bit Latches MDSL QUALITY SEMICONDUCTOR, INC. 1 DECEMBER 28, 1998
Q QUALITY SEMICONDUCTOR, INC. QS54/74FCT373T, 2373T High-Speed CMOS Bus Interface 8-Bit Latches QS54/74FCT373T QS54/74FCT2373T FEATURES/BENEFITS Pin and function compatible to the 74F373 74FCT373 and 74ABT373
More informationA6B Bit Serial-Input DMOS Power Driver
Features and Benefits 50 V minimum output clamp voltage 150 ma output current (all outputs simultaneously) 5 Ω typical r DS(on) Low power consumption Replacement for TPIC6B595N and TPIC6B595DW Packages:
More informationLow voltage 16-bit constant current LED sink driver with outputs error detection. Description. Table 1. Device summary. Order codes Package Packaging
Low voltage 16-bit constant current LED sink driver with outputs error detection Features QSOP-24 TSSOP24 SO-24 TSSOP24 (exposed pad) Low voltage power supply down to 3 V 16 constant current output channels
More informationSTP16CP05. Low voltage 16-bit constant current LED sink driver. Description. Features
Low voltage 16-bit constant current LED sink driver Datasheet - production data Features Low voltage power supply down to 3 V 16 constant current output channels Adjustable output current through external
More informationPART TEMP RANGE PIN-PACKAGE
General Description The MAX6922/MAX6932/ multi-output, 76V, vacuum-fluorescent display (VFD) tube drivers that interface a VFD tube to a microcontroller or a VFD controller, such as the MAX6850 MAX6853.
More informationMultiplexer for Capacitive sensors
DATASHEET Multiplexer for Capacitive sensors Multiplexer for Capacitive Sensors page 1/7 Features Very well suited for multiple-capacitance measurement Low-cost CMOS Low output impedance Rail-to-rail digital
More informationLast Time Buy. Deadline for receipt of LAST TIME BUY orders: October 29, 2010
Last Time Buy This part is in production but has been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently
More information74ABT273 Octal D-Type Flip-Flop
Octal D-Type Flip-Flop General Description The ABT273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) and Master Reset (MR) inputs load
More informationNJU BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3715 is a 16-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
More information8-BIT SERIAL-INPUT, DMOS POWER DRIVER
Data Sheet 26185.120 6595 LOGIC SUPPLY DATA IN OUT 0 OUT 1 OUT 2 1 2 3 4 5 6 8 9 13 LOGIC OUT 3 7 14 OUT 4 REGISTER CLEAR OUTPUT ENABLE V DD CLR OE LATCHES REGISTER REGISTER LATCHES CLK ST 20 19 18 17
More informationDW8502 High Power LED Driver
Descriptions The is an instant On/Off LED driver for high power LED applications. At output stage, one regulated current port is designed to provide a uniform and constant current sink for driving LEDs
More informationAP1511A / B IR Filter Switch Driver
AP1511A / B with one-shot output for IR-Cut Removable (ICR) ANAPEX TECHNOLOGY INC. 2F -1, No.5, Tai-Yuen 1st St., Jhubei City, Hsinchu 30265, Taiwan, R.O.C. Agent: AENEAS ELECTRONICS CO.,LTD. Tel: +886-2-87974259
More informationNJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is an 8-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as
More informationLow voltage 16-bit constant current LED sink driver with outputs error detection
Low voltage 16-bit constant current LED sink driver with outputs error detection Datasheet - production data Features Low voltage power supply down to 3 V 16 constant current output channels Adjustable
More informationLED2472GQTR. 24-channels LED driver with error detection and gain control. Description. Features. Applications
24-channels LED driver with error detection and gain control Description Datasheet - production data Features 24 constant current output channels Output current: from 4 ma to 72 ma 8 x 3 independently
More informationNJU3714A 12-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
12-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3714A is a 12-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
More informationICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS2304NZ-1 Description The ICS2304NZ-1 is a high-performance, low skew, low jitter PCI/PCI-X clock driver. It is designed to distribute high-speed signals in PCI/PCI-X applications operating
More informationObsolete Product(s) - Obsolete Product(s)
SYNCHRONOUS PARALLEL OR SERIAL IN/SERIAL OUT 8 - STAGE STATIC SHIFT REGISTER MEDIUM SPEED OPERATION : 12 MHz (Typ.) At V DD = 10V FULLY STATIC OPERATION 8 MASTER-SLAVE FLIP-FLOPS PLUS OUTPUT BUFFERING
More informationM74HC595TTR 8 BIT SHIFT REGISTER WITH OUTPUT LATCHES (3 STATE)
8 BIT SHIFT REGISTER WITH OUTPUT LATCHES (3 STATE) HIGH SPEED: f MAX = 59MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
More informationDM13A. 16-bit Constant Current LED Driver. Version : A.006 Issue Date : 2014/03/25 File Name Total Pages : 21. : SP-DM13A-A.006.
Version : A.006 Issue Date : 2014/03/25 File Name Total Pages : 21 : SP-DM13A-A.006.doc 16-bit Constant Current LED Driver 新竹市科學園區展業一路 9 號 7 樓之 1 SILICON TOUCH TECHNOLOGY INC. 9-7F-1, Prosperity Road I,
More informationICS Low Skew PCI / PCI-X Buffer. General Description. Block Diagram. Pin Configuration. Pin Descriptions OE CLK0
Low Skew PCI / PCI-X Buffer General Description The ICS9112-27 is a high performance, low skew, low jitter PCI / PCI-X clock driver. It is designed to distribute high speed signals in PCI / PCI-X applications
More informationProgrammable Low Voltage 1:10 LVDS Clock Driver ADN4670
Data Sheet Programmable Low Voltage 1:10 LVDS Clock Driver FEATURES FUNCTIONAL BLOCK DIAGRAM Low output skew
More informationMONOLITHIC QUAD 4-BIT PROGRAMMABLE DELAY LINE (SERIES 3D3444)
MONOLITHIC QUAD 4-BIT PROGRAMMABLE (SERIES 3D3444) 3D3444 FEATURES Four indep t programmable lines on a single chip All-silicon CMOS technology Low voltage operation (3.3V) Low quiescent current (1mA typical)
More informationPreliminary Datasheet. Macroblock PWM-Embedded 3-Channel Constant Current LED Sink Driver with Bi-directional Transmission
Features Preliminary Datasheet MBI6027 Macroblock LED Sink Driver with Bi-directional Transmission 3-channel constant current sink driver for RGB LED clusters Constant current range: Iout = 5~45mA @V DD
More informationICS309 SERIAL PROGRAMMABLE TRIPLE PLL SS VERSACLOCK SYNTH. Description. Features. Block Diagram DATASHEET
DATASHEET ICS309 Description The ICS309 is a versatile serially-programmable, triple PLL with spread spectrum clock source. The ICS309 can generate any frequency from 250kHz to 200 MHz, and up to 6 different
More informationNJU BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
20-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3718 is a 20-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available
More information74AC74B DUAL D-TYPE FLIP FLOP WITH PRESET AND CLEAR
DUAL D-TYPE FLIP FLOP WITH PRESET AND CLEAR HIGH SPEED: f MAX = 300MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω
More informationHCF40107B DUAL 2-INPUT NAND BUFFER/DRIVER
DUAL 2-INPUT NAND BUFFER/DRIVER 32 TIMES STANDARD B-SERIES OUTPUT CURRENT DRIVE SINKING CAPABILITY - 136 ma TYP. AT V DD = 10V, V DS = 1V QUIESCENT CURRENT SPECIF. UP TO 20V 5V, 10V AND 15V PARAMETRIC
More informationNJU3712A 8-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
8-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The NJU3712A is an 8-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective
More informationObsolete Product(s) - Obsolete Product(s)
SYNCHRONOUS PRESETTABLE 4-BIT COUNTER HIGH SPEED: f MAX = 250MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 8µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL = 0.8V (MAX.)
More informationLow-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers
' Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers SCRIPTION The is low-power transceivers for RS-485 and RS-422 communication. IC contains one driver and one receiver. The driver slew rates of
More information74AC10B TRIPLE 3-INPUT NAND GATE
TRIPLE 3-INPUT NAND GATE HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION LINE DRIVING
More information74AC00B QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION LINE DRIVING
More informationDescription. Order code Package Packaging
16-channel LED driver with 16-bit PWM, 8-bit gain and full LED error detection Preliminary data Features 16 constant current output channels Supply voltage: 3.3 V or 5 V Two PWM selectable counters 12/16-bit
More information74ACT00B QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 4.5ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL = 0.8V (MAX.) 50Ω TRANSMISSION
More informationNJU3716A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION The is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective outport
More informationHCF4040B RIPPLE-CARRY BINARY COUNTER/DIVIDERS 12 STAGE
RIPPLE-CARRY BINARY COUNTER/DIVIDERS 12 STAGE MEDIUM SPEED OPERATION : t PD = 80ns (TYP.) at V DD = 10V FULLY STATIC OPERATION COMMON RESET BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS
More informationFeatures V DD 4 STROBE MOS. Bipolar. Sub 8 GND V EE OUT 8
8-Bit Serial-Input Latched Drivers Final Information General Description BiCMOS technology gives the family flexibility beyond the reach of standard logic buffers and power driver arrays. These devices
More informationNJU3715A 16-BIT SERIAL TO PARALLEL CONVERTER PACKAGE OUTLINE GENERAL DESCRIPTION PIN CONFIGURATION FEATURES BLOCK DIAGRAM
16-BIT SERIAL TO PARALLEL CONVERTER GENERAL DESCRIPTION PACKAGE OUTLINE The NJU3715A is a 16-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V.
More informationHCF4094B 8 STAGE SHIFT AND STORE BUS REGISTER WITH 3-STATE OUTPUTS
8 STAGE SHIFT AND STORE BUS REGISTER WITH 3-STATE OUTPUTS 3-STATE PARALLEL OUTPUTS FOR CONNECTION TO COMMON BUS SEPARATE SERIAL OUTPUTS SYNCHRONOUS TO BOTH POSITIVE AND NEGATIVE CLOCK EDGES FOR CASCADING
More informationNTE4055B and NTE4056B Integrated Circuit CMOS, BCD to 7 Segment Decoder/Drivers
NTE4055B and NTE4056B Integrated Circuit CMOS, BCD to 7 Segment Decoder/Drivers Description: The NTE4055B ( Display Frequency Output) and NTE4056B (Strobed Latch Function) are single digit BCD to 7 segment
More informationTOSHIBA Bi CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC TB62707FG. 8BIT PIPO (Pallalel In, Pallalel Out) CONSTANT CURRENT DRIVERS
TOSHIBA Bi CMOS INTEGRATED CIRCUIT SILICON MONOLITHIC TB62707FG TB62707FG 8BIT PIPO (Pallalel In, Pallalel Out) CONSTANT CURRENT DRIVERS The TB62707FG is specifically designed for LED and LED DISPLAY cotant
More informationPLL Frequency Synthesizer. Technical Data YYWW HPLL HPLL-8001
PLL Frequency Synthesizer Technical Data HPLL-8001 Features Low Operating Current Consumption (4 ma, typ.) High Input Sensitivity, High Input Frequencies (50 MHz) Synchronous Programming of the Counters
More information74AC244B OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 3.8ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
More information