FCC DoC Test Report. Series Model: xxxzeus-248yt-xxxxxxx (The "y" is E & S,"x" Can be 0 to 9 & A to Z,"-" or blank ) Received Date: Feb.

Transcription

1 FCC DoC Test Report Report No.: FD160805D06B Test Model: Zeus-248ST-A Series Model: xxxzeus-248yt-xxxxxxx (The "y" is E & S,"x" Can be 0 to 9 & A to Z,"-" or blank ) Received Date: Feb. 9, 2017 Test Date: Feb. 13 ~ 17, 2017 Issued Date: Apr. 20, 2017 Applicant: Onyx Healthcare Inc. Address: 2F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: FD160805D06B Page No. 1 / 28 Report Format Version: 6.1.2

2 Table of Contents Release Control Record Certificate of Conformity Summary of Test Results Measurement Uncertainty Modification Record General Information Features of EUT General Description of EUT Operating Modes of EUT and Determination of Worst Case Operating Mode Test Program Used and Operation Descriptions Primary Clock Frequencies of Internal Source Configuration and Connections with EUT Connection Diagram of EUT and Peripheral Devices Configuration of Peripheral Devices and Cable Connections Conducted Emissions at Mains Ports Limits Test Instruments Test Arrangement Test Results Field Strength up to 1 GHz Limits Test Instruments Test Arrangement Test Results Field Strength above 1 GHz Limits Test Instruments Test Arrangement Test Results Pictures of Test Arrangements Conducted Emissions at Mains Ports Field Strength up to 1 GHz Field Strength above 1 GHz Appendix Information on the Testing Laboratories Report No.: FD160805D06B Page No. 2 / 28 Report Format Version: 6.1.2

3 Release Control Record Issue No. Description Date Issued FD160805D06B Original release. Apr. 20, 2017 Report No.: FD160805D06B Page No. 3 / 28 Report Format Version: 6.1.2

4 1 Certificate of Conformity Product: AIO Brand: ONYX Test Model: Zeus-248ST-A Series Model: xxxzeus-248yt-xxxxxxx (The "y" is E & S,"x" Can be 0 to 9 & A to Z,"-" or blank ) Sample Status: Engineering sample Applicant: Onyx Healthcare Inc. Test Date: Feb. 13 ~ 17, 2017 Standards: 47 CFR FCC Part 18, Subpart C The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample s EMC characteristics under the conditions specified in this report. Prepared by :, Date: Apr. 20, 2017 Jessica Cheng / Senior Specialist Approved by :, Date: Apr. 20, 2017 Henry Lai / Director Report No.: FD160805D06B Page No. 4 / 28 Report Format Version: 6.1.2

5 2 Summary of Test Results 47 CFR FCC Part 18, Subpart C FCC Clause Test Item Result/Remarks Verdict AC Power Line Conducted Minimum passing limit (b) Pass Emissions margin is db at MHz Minimum passing limit Field Strength Measurement margin is db at Pass (30MHz ~ 1GHz) MHz (b) Minimum passing limit Field Strength Measurement margin is db at Pass (Above1GHz) MHz Note: There is no deviation to the applied test methods and requirements covered by the scope of this report. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT: The listed uncertainties are the worst case uncertainty for the entire range of measurement. Please note that the uncertainty values are provided for informational purposes only and are not used in determining the PASS/FAIL results. Measurement Frequency Expanded Uncertainty (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.77 db Field Strength Measurement 30MHz ~ 1GHz Above 1GHz 3.89 db 4.91 db 2.2 Modification Record There were no modifications required for compliance. Report No.: FD160805D06B Page No. 5 / 28 Report Format Version: 6.1.2

6 3 General Information 3.1 Features of EUT The tests reported herein were performed according to the method specified by Onyx Healthcare Inc., for detailed feature description, please refer to the manufacturer's specifications or user's manual. 3.2 General Description of EUT Product Brand Test Model Series Model Model Difference Sample Status AIO ONYX Zeus-248ST-A xxxzeus-248yt-xxxxxxx (The "y" is E & S,"x" Can be 0 to 9 & A to Z,"-" or blank ) Marketing Differentiation Engineering sample Operating Software Windows 10 Power Supply Rating Accessory Device Data Cable Supplied Note: 24Vdc from adapter Adapter N/A 1. This report is issued as a supplementary report to BV CPS report no. FD160805D06. The difference compared with original report is adding model, therefore the EUT is re-tested in this report. Model No. Test Model Panel size Remark xxzeus-228ytxxxxxxxx ZEUS-228ST- A " Original Approved xxxzeus-248yt-xxxxxxx Zeus-248ST-A " Additional (The "y" is E & S,"x" Can be 0 to 9 & A to Z,"-" or blank ) 2. The EUT uses following adapter. Adapter 1 Brand Model Input Power Output Power Power Line Adapter 2 Brand Model Input Power Output Power Power Line ADAPTER TECH. ATM120-P Vac, 50-60Hz, A (3-Pin) 24Vdc, 5A, 120W max. Non-shielded DC cable (1.8m) with one ferrite core. EDAC POWER ELEC. EM11011M Vac, 50-60Hz, A (3-Pin) 24Vdc, 5A Non-shielded DC cable (2.1m) with one ferrite core. Report No.: FD160805D06B Page No. 6 / 28 Report Format Version: 6.1.2

7 3. The EUT was configured with the following key components: Test Model Zeus-248ST-A Part Mother Board CPU OMB-M228 Intel i7-6600u / 2.81GHz Vendor / Model / Specification Panel 23.8".1920x1080.AUO.M238HVN01.0. DDR4 4GB.DDR DVD DVD-ROM SSD Battery board Isolation Board OPM-C02C 2.4G WLAN card Intel " SATA3 SSD.128GB NA BT Module Intel 7260 OS Win10/8.1 LAN 10/100/1000 Report No.: FD160805D06B Page No. 7 / 28 Report Format Version: 6.1.2

8 3.3 Operating Modes of EUT and Determination of Worst Case Operating Mode 1. For Radiated test, the EUT was tested with previous worst case under Adapter The EUT is designed with AC power supply of Vac, 50-60Hz. For radiated emission evaluation, 230Vac/50Hz (for EN 55011) & 120Vac/60Hz (for FCC Part 18) had been covered during the pre-test. The worst radiated emission data was founded under the following. Previous worst case of adapter Test Model Worst Emission of Power Input Adapter 1. Zeus-248ST-A Vac/60Hz 3. Test modes are presented in the report as below. Mode Test Model Test Condition Conducted emission test 1 Zeus-248ST-A Full system + Adapter 1 (120Vac, 60Hz) 2 Zeus-248ST-A Full system + Adapter 2 (120Vac, 60Hz) Radiated emission test 1 Zeus-248ST-A Full system + Adapter 1 (120Vac/60Hz) 3.4 Test Program Used and Operation Descriptions a. Turned on the power of all equipment. b. EUT ran a test program to enable all functions. c. EUT read and wrote messages to/ from SSD and ext. HDDs. d. EUT sent and received messages to/ from Server PC (kept in a remote area) via two UTP LAN cables (10m each). e. EUT sent and received messages to/from Wireless Broadband Router (kept in a remote area) via wireless transmission. f. EUT sent and received messages to/from Server PC (kept in a remote area) via Bluetooth transmission. g. EUT sent "H" messages to LCD panel and then it displayed "H" patterns on its screen. h. EUT sent messages to printer and printed them out. i. EUT run internal DVD and play audio signal out. j. Video camera of EUT captured video image, then EUT displayed it on its screen. k. EUT sent messages to modems. l. Steps c-k were repeated. 3.5 Primary Clock Frequencies of Internal Source The highest frequency generated or used within the EUT or on which the EUT operates or tunes is 6000MHz, provided by Onyx Healthcare Inc., for detailed internal source, please refer to the manufacturer's specifications. Report No.: FD160805D06B Page No. 8 / 28 Report Format Version: 6.1.2

9 4 Configuration and Connections with EUT 4.1 Connection Diagram of EUT and Peripheral Devices TEST CONFIGURATION USB USB Printer (A) EUT USB USB Mouse (B) USB USB Keyboard (C) USB 3.0*4 4 USB HDD*4 (D) Adapter (EUT) 7 120Vac 6 DC Input LAN*2 8 RS232*2 5 Modem*2 (E) Remote site Notebook (H) Notebook*2 (F) Wireless Broadband Router (G) Report No.: FD160805D06B Page No. 9 / 28 Report Format Version: 6.1.2

10 4.2 Configuration of Peripheral Devices and Cable Connections ID Product Brand Model No. Serial No. FCC ID Remarks A. PRINTER LEXMARK Z33 N/A FCC DoC Approved Provided by Lab B. USB Mouse Microsoft FCC DoC Approved Provided by Lab C. USB KEYBOARD BTC 5200U G E5XKB5122U Provided by Lab WD WDBUZG0010BB K-PESN WXF1E84H2ASN FCC DoC Approved Provided by Lab D. USB 3.0 Hard Disk*4 WD WDBUZG0010BB K-PESN WXM1E1562S3E FCC DoC Approved Provided by Lab WD WDBUZG0010BB K-PESN WXN1E94A9S8X FCC DoC Approved Provided by Lab WD WDBUZG0010BB K-PESN WX61A45JRTS8 FCC DoC Approved Provided by Lab E. MODEM*2 ACEEX IFAXDM1414 Provided by Lab ACEEX IFAXDM1414 Provided by Lab F. Notebook PC*2 ASUS PU401L E9NXBC FCC DoC Approved Provided by Lab ASUS PU401L ECNXBC FCC DoC Approved Provided by Lab G. Wireless Broadband Router D-LINK DIR-815 PVK21B KA2IR815A1 Provided by Lab H. Notebook PC SONY SVS151A12P FCC DoC Approved Provided by Lab Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Items E~H acted as communication partners to transfer data. ID Descriptions Qty. Length (m) Shielding (Yes/No) Cores (Qty.) Remarks 1. USB cable Y 0 Provided by Lab 2. USB cable Y 1 Provided by Lab 3. USB cable Y 0 Provided by Lab 4. USB cable Y 0 Provided by Lab 5. RS232 cable Y 0 Provided by Lab 6. DC cable N 1 Supplied by client 7. AC power cord N 0 Provided by Lab 8. LAN cable 2 10 N 0 Provided by Lab Note: The core(s) is(are) originally attached to the cable(s). Report No.: FD160805D06B Page No. 10 / 28 Report Format Version: 6.1.2

11 5 Conducted Emissions at Mains Ports 5.1 Limits ALL OTHER PART 18 CONSUMER DEVICES Frequency Conducted limit Measured with a 50uH/50ohm LISN (MHz) Quasi-Peak Average 0.15 ~ ~ 56* 56 ~ 46* 0.5 ~ ~ Notes: * Decreases with the logarithm of the frequency 5.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due ROHDE & SCHWARZ TEST RECEIVER ROHDE & SCHWARZ Artificial Mains Network (for EUT) LISN With Adapter (for EUT) ROHDE & SCHWARZ Artificial Mains Network (for peripherals) SCHWARZBECK Artificial Mains Network (For EUT) ESCS Apr. 12, 2016 Apr. 11, 2017 ENV May 04, 2016 May 03, 2017 AD10 C10Ada-002 May 04, 2016 May 03, 2017 ESH3-Z Nov. 23, 2016 Nov. 22, 2017 NNLK May 04, 2016 May 03, 2017 Software Cond_V NA NA NA RF cable (JYEBAO) With 10dB PAD 5D-FB Cable-C10.01 Feb. 15, 2016 Feb. 14, 2017 SUHNER Terminator (For ROHDE & SCHWARZ 65BNC-5001 E May 12, 2016 May 11, 2017 LISN) ROHDE & SCHWARZ Artificial Mains Network (For ESH3-Z Nov. 08, 2016 Nov. 07, 2017 TV EUT) LISN With Adapter (for TV EUT) N/A Nov. 08, 2016 Nov. 07, 2017 Notes: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No The VCCI Site Registration No. C Tested Date: Feb. 13, 2017 Report No.: FD160805D06B Page No. 11 / 28 Report Format Version: 6.1.2

12 5.3 Test Arrangement a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The test results of conducted emissions at mains ports are recorded of six worst margins for quasi-peak (mandatory) [and average (if necessary)] values against the limits at frequencies of interest unless the margin is 20 db or greater. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. Vertical Ground Reference Plane Test Receiver 40cm EUT 80cm LISN Note : Support units were connected to second LISN. Horizontal Ground Refe rence Plane For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: FD160805D06B Page No. 12 / 28 Report Format Version: 6.1.2

13 5.4 Test Results Frequency Range 150kHz ~ 30MHz Input Power 120Vac, 60Hz Tested by Adam Chen Test Mode Mode 1 Detector Function & Resolution Bandwidth Environmental Conditions Quasi-Peak (QP) / Average (AV), 9kHz 22, 81%RH Phase Of Power : Line (L) No Frequency Correction Factor Reading Value Emission Level Limit Margin (db) (MHz) (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FD160805D06B Page No. 13 / 28 Report Format Version: 6.1.2

14 Frequency Range 150kHz ~ 30MHz Input Power 120Vac, 60Hz Tested by Adam Chen Test Mode Mode 1 Detector Function & Resolution Bandwidth Environmental Conditions Quasi-Peak (QP) / Average (AV), 9kHz 22, 81%RH Phase Of Power : Neutral (N) No Frequency Correction Factor Reading Value Emission Level Limit Margin (db) (MHz) (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FD160805D06B Page No. 14 / 28 Report Format Version: 6.1.2

15 Frequency Range 150kHz ~ 30MHz Input Power 120Vac, 60Hz Tested by Adam Chen Test Mode Mode 2 Detector Function & Resolution Bandwidth Environmental Conditions Quasi-Peak (QP) / Average (AV), 9kHz 22, 81%RH Phase Of Power : Line (L) No Frequency Correction Factor Reading Value Emission Level Limit Margin (db) (MHz) (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FD160805D06B Page No. 15 / 28 Report Format Version: 6.1.2

16 Frequency Range 150kHz ~ 30MHz Input Power 120Vac, 60Hz Tested by Adam Chen Test Mode Mode 2 Detector Function & Resolution Bandwidth Environmental Conditions Quasi-Peak (QP) / Average (AV), 9kHz 22, 81%RH Phase Of Power : Neutral (N) No Frequency Correction Factor Reading Value Emission Level Limit Margin (db) (MHz) (db) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FD160805D06B Page No. 16 / 28 Report Format Version: 6.1.2

17 6 Field Strength up to 1 GHz 6.1 Limits Frequency (MHz) ANY TYPE UNLESS OTHERWISE SPECIFIED (MISCELLANEOUS) MHz at 300 meters at 10 meters MHz at 3 meters Quasi-Peak (uv/m) Quasi-Peak (dbuv/m) Quasi-Peak (dbuv/m) Any ISM frequency Any Non- ISM frequency Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due ROHDE & SCHWARZ TEST RECEIVER Schwarzbeck BILOG Antenna ESCI Sep. 05, 2016 Sep. 04, 2017 VULB Dec. 16, 2016 Dec. 15, 2017 Agilent Preamplifier 8447D 2944A08312 Feb. 27, 2016 Feb. 26, 2017 CT Turn Table TT100 CT-0055 NA NA CT Tower AT100 CT-0055 NA NA Software Radiated_V NA NA NA ADT RF Switches BOX EM-H Mar Mar. 21, 2017 WOKEN RF cable 8D CABLE-ST6-01 Sep Sep. 21, 2017 With 5dB PAD Notes: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Open Site No The VCCI Site Registration No. R The FCC Site Registration No Tested Date: Feb. 14, 2017 Report No.: FD160805D06B Page No. 17 / 28 Report Format Version: 6.1.2

18 6.3 Test Arrangement a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited test facility. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. Note: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for quasi-peak detection (QP) at frequency below 1GHz. EUT& Support Units 10m Ant. Tower 1-4m Variable Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: FD160805D06B Page No. 18 / 28 Report Format Version: 6.1.2

19 6.4 Test Results Frequency Range 30MHz ~ 1GHz Tested by Chin-Wen Wang Test Mode Mode 1 Detector Function & Resolution Bandwidth Environmental Conditions Quasi-Peak (QP), 120kHz 21, 70%RH No Frequency (MHz) Antenna Polarity & Test Distance : Horizontal at 10 m Emission Antenna Table Limit Margin Level Height Angle (dbuv/m) (db) (dbuv/m) (m) (Degree) Raw Value Correction Factor (db/m) QP H QP H QP H QP H QP H QP H QP H QP H QP H QP H Remarks: 1. Emission Level(dBuV/m) = Raw Value + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) Pre-Amplifier Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value Report No.: FD160805D06B Page No. 19 / 28 Report Format Version: 6.1.2

20 Frequency Range 30MHz ~ 1GHz Tested by Chin-Wen Wang Test Mode Mode 1 Detector Function & Resolution Bandwidth Environmental Conditions Quasi-Peak (QP), 120kHz 21, 70%RH No Frequency (MHz) Antenna Polarity & Test Distance : Vertical at 10 m Emission Antenna Table Limit Margin Level Height Angle (dbuv/m) (db) (dbuv/m) (m) (Degree) Raw Value Correction Factor (db/m) QP V QP V QP V QP V QP V QP V QP V QP V QP V Remarks: 1. Emission Level(dBuV/m) = Raw Value + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) Pre-Amplifier Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value Report No.: FD160805D06B Page No. 20 / 28 Report Format Version: 6.1.2

21 7 Field Strength above 1 GHz 7.1 Limits Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: Frequency (MHz) ANY TYPE UNLESS OTHERWISE SPECIFIED(MISCELLANEOUS) at 300 meters Field Strength (uv/m) Above 1GHz at 3 meters Peak (dbuv/m) Any ISM frequency Any Non- ISM frequency Frequency band in which device operates (MHz) Below to to to 1000 Above 1000 RANGE OF FREQUENCY MEASUREMENTS Lowest frequency Lowest frequency generated in the device, but not lower than 9 khz Lowest frequency generated in the device, but not lower than 9 khz Lowest frequency generated in the device or 25MHz, whichever is lower Lowest frequency generated in the device or 100MHz, whichever is lower -do- Highest Frequency 30MHz 400MHz Tenth harmonic or 1000MHz, whichever is higher Tenth harmonic Tenth harmonic or highest detectable emission 7.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Agilent Spectrum E4446A MY May 30, 2016 May 29, 2017 Agilent Test Receiver N9038A MY Jul. 27, 2016 Jul. 26, 2017 Agilent Preamplifier 8449B 3008A01292 Feb. 26, 2016 Feb. 25, 2017 MITEQ Preamplifier AMF-6F P Mar. 01, 2016 Feb. 28, 2017 EMCI Preamplifier EMC184045B Mar. 01,2016 Feb. 28, 2017 Schwarzbeck Horn Antenna BBHA Dec. 30, 2016 Dec. 29, 2017 EMCO Horn Antenna Dec. 29, 2016 Dec. 28, 2017 Max Full. Turn Table MF7802 MF NA NA Software Radiated_V NA NA NA SUHNER RF cable SF102 Cable-CH10-3.6m Aug. 15, 2016 Aug. 14, 2017 With 3dB PAD Notes: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Chamber No The Industry Canada Reference No. IC 7450E The VCCI Site Registration No. G The FCC Site Registration No Tested Date: Feb. 17, Report No.: FD160805D06B Page No. 21 / 28 Report Format Version: 6.1.2

22 7.3 Test Arrangement a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna can be varied from one meter to four meters, the height of adjustment depends on the EUT height and the antenna 3dB beamwidth both, to detect the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The spectrum analyzer system was set to peak detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. Note: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection (PK) at frequency above 1GHz. EUT & Support Units 3m Ant. Tower 1-4m* Variable Turn Table Absorber 80cm Ground Plane Spectrum analyzer * : depends on the EUT height and the antenna 3dB beamwidth both. For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: FD160805D06B Page No. 22 / 28 Report Format Version: 6.1.2

23 7.4 Test Results Frequency Range 1GHz ~ 30GHz Tested by Vhenson Huang Test Mode Mode 1 Detector Function & Resolution Bandwidth Environmental Conditions Peak (PK), 1MHz 23, 67%RH No Frequency (MHz) Antenna Polarity & Test Distance : Horizontal at 3 m Emission Antenna Table Limit Margin Level Height Angle (dbuv/m) (db) (dbuv/m) (m) (Degree) Raw Value Correction Factor (db/m) PK H PK H PK H PK H PK H PK H Remarks: 1. Emission Level(dBuV/m) = Raw Value + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) Pre-Amplifier Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value Report No.: FD160805D06B Page No. 23 / 28 Report Format Version: 6.1.2

24 Frequency Range 1GHz ~ 30GHz Tested by Vhenson Huang Test Mode Mode 1 Detector Function & Resolution Bandwidth Environmental Conditions Peak (PK), 1MHz 23, 67%RH No Frequency (MHz) Antenna Polarity & Test Distance : Vertical at 3 m Emission Antenna Table Limit Margin Level Height Angle (dbuv/m) (db) (dbuv/m) (m) (Degree) Raw Value Correction Factor (db/m) PK V PK V PK V PK V PK V PK V Remarks: 1. Emission Level(dBuV/m) = Raw Value + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (db/m) + Cable Factor (db) Pre-Amplifier Factor (db) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value Report No.: FD160805D06B Page No. 24 / 28 Report Format Version: 6.1.2

25 8 Pictures of Test Arrangements 8.1 Conducted Emissions at Mains Ports Report No.: FD160805D06B Page No. 25 / 28 Report Format Version: 6.1.2

26 8.2 Field Strength up to 1 GHz Report No.: FD160805D06B Page No. 26 / 28 Report Format Version: 6.1.2

27 8.3 Field Strength above 1 GHz Report No.: FD160805D06B Page No. 27 / 28 Report Format Version: 6.1.2

28 Appendix Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Tel: Fax: Hsin Chu EMC/RF/Telecom Lab Tel: Fax: Hwa Ya EMC/RF/Safety Lab Tel: Fax: Web Site: The address and road map of all our labs can be found in our web site also. --- END --- Report No.: FD160805D06B Page No. 28 / 28 Report Format Version: 6.1.2