Temperature Sensor Tri-Clamp

Transcription

1 SENSORS FOR AN BIOPHARMA. Prouct Information TFP-47, -57, -67, -167 Temperature Sensor Tri-Clamp Application/Specifie usage Temperature Measurement in vessels an pipes Authorizations Application examples Monitoring of CIP-/SIP-process Temperature monitoring in milk vessels Hygienic esign/process connection Tri-Clamp sealing system without aapter Prouct contacting materials compliant to FA Sensor completely mae of stainless steel Conforming to 3-A Sanitary Stanar Temperature sensor TFP-47 Features/Avantages irect Connection without aapter Integrate transmitter optional ifferent electrical connections available Options/Accessories 2 x Pt100 (not retrofittable) 2 x Pt100 with two transmitters (not retrofittable) Pt100 chip with other classes of accuracy (1/3B, 1/10B) Programmable transmitters with output ma, 2-wire Programming aapter MPU-P 9701 Integrate transmitters for Profibus PA an HART-protocol Integrate transmitter MPU-LC with isplay in connecting hea Fast response sensor tip 3 mm an 4 mm Pre-assemble connecting cable in other lengths an other material Temperature Transmitter MPU-LC with isplay Application / Specifie Usage mA transmitter with LC for Pt100 temperature sensor For installation in temperature sensor Sensor monitoring Option MPU-LC (isplay in the connection hea) Features 4-igit isplay with green backlight Temperature measurement in C an F Easy range select by one button Lower costs for wiring because of 2-wire technology Note See prouct information MPU-LC for etails.

2 Specification 2 Temperature sensor Process connection Materials connecting hea thermowell an Tri-Clamp Tri-Clamp stainless steel stainless steel Surface quality R a 0.8 µm Insertion length EL Operating pressure Temperature ranges ambient process CIP-/ SIP-cleaning Sensing resistor acc. to IN EN Pt100 Electrical connection Protection class cable glan cable connection cable glan cable connection mm in steps of 5 mm 10 bar maximum C C 150 C max. for 120 minutes (with transmitter) M16 x 1.5 M12-plug , 4-pins IP 67 IP 69 K Transmitter MPU-4, MPU-10, MPU-H, MPU-M Temperature ranges Measuring ranges ambient storage MPU-4, MPU-H, MPU-M MPU C C Accuracy input < ±0.25 C Temperature rift zero, span < 0.01 % / K Supply Output MPU-M, MPU-4 MPU-10 accuracy signal accuracy buren Humiity without conensation % stanar: C, / 100 / 150 / 200 C special ranges free programable stanar: C configuration occurs with Profibus V C V C 0.01 % / V (reference: 12 V C) analog ma (not for MPU-10) < ±0.1 % of measurement range < 600 Ω (at U B = 24 V) Accuracy classes of temperature sensors Tolerances for Pt100 acc. to IN EN Pt100 A 1/3 B 1/10 B 0 C / 100 Ω ±0.15 K / ±0.06 Ω ±0.10 K / ±0.04 Ω ±0.03 K / ±0.01 Ω 100 C / Ω ±0.35 K / ±0.13 Ω ±0.27 K / ±0.10 Ω ±0.08 K / ±0.03 Ω

3 3 Electrical Connection Elektrischer Electrical connection Anschluss without ohne Kopftransmitter Elektrischer Electrical connection Anschluss with mit Kopftransmitter With 1 x M12 plug Belegung Configuration 1. M12-Stecker 1st plug M12-Stecker With plug Configuration Belegung M12 plug M12-Stecker 1: + supply 2: - supply ma 3: not connecte 4: not connecte With 2 x M12 plug Belegung Configuration 2. M12-Stecker 2n plug Mit With Kabelverschraubung cable glan ma current loop ma Stromschleife With cable glan Belegung Configuration Klemmen strip terminal Electrical connection with two transmitter (TFP-67) Klemmen clamps for für 1st 1. Pt100 Klemmen clamps for für 2n 2. Pt100 (bei (at version Ausführung 2 x Pt100) 2 x Pt100) With 1 x M12-plug (sensor 1 + sensor 2) Configuration M12-plug 1: + supply (sensor 1) 2: - supply ma (sensor 1) 3: - supply ma (sensor 2) 4: + supply (sensor 2) With 2 x M12-plug (sensor 1) Configuration M12-plug 1: + supply (sensor 1) 2: - supply ma (sensor 1) 3: not connecte 4: not connecte With 2 x M12-plug (sensor 2) Configuration M12-plug 1: + supply (sensor 2) 2: - supply ma (sensor 2) 3: not connecte 4: not connecte

4 imensional rawings 4 TFP-47 TFP-47.2 TFP-67 TFP-57 TFP TFP-167 EL 82 TFP-167 /... / MPU-M EL EL EL EL 75,5 imension table Tri-Clamp Type Orer coe Clamp size [mm] C25 TFP-.../C Suitable for pipe iameter N 6 8 ISO /4", 3/8", 1/2", 3/4" Pipe style IN series A IN series B / ISO 1127 IN series C C34 TFP-.../C N IN series A C50 TFP-.../C C64 TFP-.../C N ISO " + 1½" N 50 2" IN series A IN series B / ISO 1127 IN series C IN series A IN series C C77 TFP-.../C ½" IN series C C91 TFP-.../C N 65 3" IN series A IN series C

5 5 Sensor Tips Accessories Sensor tip iameter an response time All temperature sensors are available with smaller sensor tips, to ensure a shorter response time. The below-mentione times were measure by emersing a temperature sensor from room temperature into boiling water. Sensor tip Ø 6 mm Sensor tip Ø 4 mm Sensor tip Ø 3 mm 50 %-time: t s 90 %-time: t s 50 %-time: t s 90 %-time: t s 50 %-time: t s 90 %-time: t s Ø6 Ø6 Ø6 Ø4 Ø3 Accessories Spare parts iameter pipe Clamp size [mm] (see page 4) IN series A IN series C Clamp ring Tri-Clamp Sealing ring Tri-Clamp N SRC-10 RC-10 N SRC-10 RC-15 N SRC-10 RC-20 N SRC-25 RC-25 N SRC-25 RC-32 N SRC-25 RC-40 N SRC-50 RC-50 N SRC-65 RC-65 1/2" 25.0 SRC-5 RC-1/2" 3/4" 25.0 SRC-5 RC-3/4" 1" 50.5 SRC-25 RC-1" 2" 64.0 SRC-50 RC-50 2½" 77.5 SRC-2½" RC-2½" 3" 91.0 SRC-65 RC-65

6 Warnings Installation 6 Conitions for a measuring point accoring to 3-A Sanitary Stanar The sensors TFP-47, -57, -67, -167 conforming to the 3-A Sanitary Stanar. The sensors are esigne for CIP-/ SIP-cleaning. Maximum 150 C / 120 min. Only with 3-A conforming Tri-Clamp connection. Mounting position, self raining an the position of the leackage hole must be in accorance to current 3-A Sanitary Stanar. Transport / Storage No outoor storage ry an ust free Not expose to corrosive meia Protecte against solar raiation Avoiing mechanical shock an vibration Storage temperature C Relative humiity maximum 98 % Cleaning / Maintenance In case of using pressure washers, ont t point nozzle irectly to electrical connections! Conventional Usage Not suitable for applications in explosive areas. Not suitable for applications in security-relevant equipments (SIL). Reshipment Sensors shall be clean an free of meia or heatconuctive paste an must not be contaminate with angerous meia! Use suitable transport packaging only to avoi amage of the equipment! Stanars an Guielines isposal Electrical evices shoul not be ispose of with househol trash. They must be recycle in accorance with national laws an regulations. Take the evice irectly to a specialize recycling company an o not use municipal collection points. You have to comply with applicable regulations an irectives. Note on CE Applicable irectives: Electromagnetic Compatibility irective 2014/30/EU Compliance with the applicable EU irectives is ientifie by the CE label on the prouct. The operating company is responsible for complying with the guielines applicable to the entire installation. Accessories PVC-cable with M12-connection PVC-cable with M12-connection mae of , IP 69 K, unshiele M12-PVC / 4-5 m PVC-cable 4-pin, length 5 m M12-PVC / 4-10 m PVC-cable 4-pin, length 10 m M12-PVC / 4-25 m PVC-cable 4-pin, length 25 m PVC-cable with M12-connection, brass nickel-plate, IP 67, shiele M12-PVC / 4G-5 m PVC-cable 4-pin, length 5 m M12-PVC / 4G-10 m PVC-cable 4-pin, length 10 m M12-PVC / 4G-25 m PVC-cable 4-pin, length 25 m Programming aapter MPU-P 9701 Programming aapter MPU-P 9701 Programming aapter for MPU-4, MPU-H an MPU-M

7 7 Orer Coe Orer coe for version with 1 x Pt100 TFP-47 TFP-57 TFP-167 (connecting hea Ø 55 mm) (connecting hea Ø 55 mm, with spacer) (connecting hea Ø 18 mm, electrical connection via M12-plug) Sensor length EL in mm (in steps of 5 mm) xxx (special length) iameter thermowell in mm 6 8 iameter sensor tip in mm X (no reuction) 3 (only for thermowell 6 mm) 4 (only for thermowell 6 mm an 8 mm) 6 (only for thermowell 8 mm) Accuracy class Pt100 A 1/3B 1/10B Electrical connection (not selectable for TFP-167) PG (cable glan M16x1.5) M12 (M12-plug , stanar with MPU-LC) Transmitter X (without) only for TFP-47, -57 MPU-4 (programmable) MPU-10 (Profibus PA) MPU-H (HART-protocol) MPU-LC (with isplay) only for TFP-167 MPU-M (programmable) Measuring range MPU (only for types with transmitter; not for MPU-LC) (measurement range C) (measurement range C) (measurement range C) (measurement range C) (measurement range C) xx...yy (special range) Tri-Clamp size C25 (Pipe iameter: see imension C34 Table Tri-Clamp on page 4) C50 C64 C77 C91 TFP-47/ 100/ 6/ X/ A/ PG/ MPU-4/ / C25

8 Prouct Information TFP-47, -57, -67, Orer coe for version with 2 x Pt100 TFP-47.2 TFP-57.2 TFP-67 (connecting hea Ø 55 mm, 2 x Pt100, no transmitter possible) (connecting hea Ø 55 mm, 2 x Pt100, with spacer, no transmitter possible!) (high connecting hea Ø 55 mm, 2 x Pt100, prepare for 2 x transmitter) Sensor length EL in mm (in steps of 5 mm) xxx (special length) iameter thermowell in mm 6 8 iameter sensor tip in mm X (no reuction) 3 (only for thermowell 6 mm) 4 (only for thermowell 6 mm an 8 mm) 6 (only for thermowell 8 mm) Accuracy class Pt100 A 1/3B 1/10B Electrical connection (only for TFP-47.2 an 57.2) PG (cable glan M16x1.5) 2PG (2 x cable glan M16x1.5) 2M12 (2 x M12-plug ) Electrical connection (only for TFP-67) M12 (M12-plug ) 2M12 (2 x M12-plug ) 1st Transmitter MPU-4 (programmable) Measuring range 1st transmitter (measurement range C) (measurement range C) (measurement range C) (measurement range C) (measurement range C) xx...yy (special range) 2n Transmitter MPU-4 (programmable) Measuring range 2n transmitter (range C) (range C) (range C) (range C) (range C) xx...yy (special range) Tri-Clamp size C25 (Pipe iameter: C34 see imension C50 table Tri-Clamp on C64 page 4) C77 C91 TFP-67/ 100/ 6/ X/ A/ M12/ MPU-4/ / MPU-4/ / C / 3.2 / / AR / EU NEGELE MESSTECHNIK GMBH Raiffeisenweg Egg an er Guenz Phone +49 (0) Fax +49 (0) sales@anerson-negele.com Tech. Support: support@anerson-negele.com Phone +49 (0)