Series + accesories DLA

TA2. series. Industrial Motion. Product Segments

Product Segments Industrial Motion TiMOTION s TA2 linear actuator is compact, robust and fully sealed. This linear actuator is perfect for use in small spaces where force or capability cannot be sacrificed.

Actuator ID12. Product Data Sheet Feature

Product Data Sheet www.moteck.com Actuator ID12 ID12 has the same performance of load capability, speed, and power consumption as ID1. However, ID12 features its tetragonal outer tube, which makes it easily

LINEAR POTENTIOMETER. LZW Series. Key-Features:

LINEAR POTENTIOMETER LZW Series Key-Features: Content: Technical Data...2 Technical Drawing...3 Signal Conditioner Squeezer...4 Electrical Connection...5 Accessories...5 Order Code...6 - Two models with

LINEAR POTENTIOMETER. LMI12-SL / LMI12-SE Series. Key-Features:

LINEAR POTENTIOMETER LMI12-SL / LMI12-SE Series Key-Features: Content: Technical Data...2 Electrical Connection...3 Technical Drawing.4 Order Code & Accessories...5 - Linear displacement transducer with

CYHCS-RC2S Split Core Hall Effect DC Current Sensor

Current Sensors CYHCS-RC2S Split Core Hall Effect DC Current Sensor This Hall Effect current sensor can be used for measurement of DC and AC current, pulsed currents etc. The output of the transducer reflects

HX-EP SERIES DIGITAL OUTPUT

HX-EP SERIES DIGITAL OUTPUT Utilizing an incremental encoder as the sensor, the UniMeasure HX-EP series position transducer provides a two channel square wave current sinking output signal in quadrature.

Express Delivery. Axial. Connection

HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

Switch Mode Power Supply SMPS-T160. Data sheet LINAK.COM/TECHLINE

Switch Mode Power Supply SMPS-T160 Data sheet LINAK.COM/TECHLINE SMPS-T160 The SMPS-T160 is a powerful Switch Mode Power Supply typically used for outdoor applications within the TECHLINE segment. SMPS-T160

CYD8945 High Reliability Hall Effect Switch IC

CYD8945 High Reliability Hall Effect Switch IC The CYD8945 Hall-Effect switch, produced with ultra-high voltage bipolar technology, has been designed specifically for automotive and industrial applications

AC/DC sensitive residual current monitoring module RCMB121-

AC/DC sensitive residual current monitoring module RCMB121- for safe charging of electrical vehicles according to IEC 62752 for IC-CPD and IEC 60364-7-722 for Wall Boxes Preliminary datasheet Vorläufiges

2554 n n n n n n n n n n n n n n. Captive External. E2554 n n n n n n n

HAYD: 03 756 744 G4 5000 Series: Ø 5 mm (.0-in) Can-Stack Stepper Motor Linear Actuator Haydon 5000 Series generates higher force than all other competitors. Offers high durability and exceptional performance.

DC Current Sensor CYCT04-xnL20

DC Current Sensor CYCT04-xnL20 This current sensor is based on magnetic modulation and compensation principle, and can be used for measurement of small DC current and leakage current, current difference

CAN-IO Custom IO remote module

CAN-IO Custom IO remote module Main characteristics High customization Integrate different types of inputs/ outputs Up to 40 total channels DIN rail mount or plate Main applications Climatic chambers Autoclaves

OPERATINGINSTRUCTIONS for SIXTEENCHANNEL SERVO MOTOR CONTROLLER and SIXTEENCHANNEL JOYSTICK AMPLIFIER February 27, 1999

OPERATINGINSTRUCTIONS for SIXTEENCHANNEL SERVO MOTOR CONTROLLER and SIXTEENCHANNEL JOYSTICK AMPLIFIER February 27, 1999 The 16 Channel Servo Motor Controller is used to adapt a 0 to 10 volt analog control

AC/DC to Logic Interface Optocouplers Technical Data

H AC/DC to Logic Interface Optocouplers Technical Data HCPL-37 HCPL-376 Features Standard (HCPL-37) and Low Input Current (HCPL-376) Versions AC or DC Input Programmable Sense Voltage Hysteresis Logic

maxon document number:

maxon document number: 791272-04 1 Table of contents... 2 2 Table of figures... 3 3 Introduction... 4 4 How to use this guide... 4 5 Safety Instructions... 5 6 Performance Data... 6 6.1 Motor data... 6

The World of Motion Control

PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str.39a D-53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com ME16 1 of 8 Rev.7.22 / 05.02.2007 Description The ME16 is a reliable

WS12EX Position Sensor with Analog output Dust explosion-proof

Sensor for Hostile Environments Class IP67 Measurement Range: 0... 100 mm to 0... 3000 mm With Analog Output Dust Ex proof, category 3, zone 22 II 3D EEx T80 C IP67 Specifications Outputs Material Resolution

The GMR Switch Advantage

SENSOR PRODUCTS DIVISION The GMR Switch Advantage GMR Switch = Larger Design Margin When GMR materials are integrated with digital on-board electronics, the result is the GMR Switch. The GMR Switch offers

1. This is an integrated product combining a bearing with a rotation sensor that detects the speed and direction of rotation.

1. This is an integrated product combining a bearing with a rotation sensor that detects the speed and direction of rotation. 2. With a wide variety of models and advanced functions available, these bearings

Ø20mm (.79-in) Captive. Bipolar n n n n n n # 5 VDC 12 VDC. 270 ma. 113 ma 106 Ω 18.5 Ω. 5.5 mh. 32 mh 2.7 W. 0.5 gcm 2. Class B.

20000 Series: Ø 20 mm (.79-in) Can-Stack Stepper Motor Linear Actuator Haydon 20000 Series versatile and compact Engineered with unique features reliable long life and performance. Ø20mm (.79-in) Captive

maxon motor maxon motor control 1-Q-EC Amplifier DEC 24/1 Order numbers , , , ,

maxon motor control 1-Q-EC Amplifier DEC 24/1 Order numbers 249630, 249631, 249632, 318305, 381510 September 2009 edition The DEC (Digital EC Controller) is a 1-quadrant amplifier for controlling electronically

10.00 (1/2) PAC series

Clamp-on AC/DC current probes PAC Series The is a range of professional AC/DC clamp-on current probes designed to meet the very latest in safety and performance standards. There are two different jaw designs

POSIROT. PMIS4, PMIR5 Magnetic incremental encoder. Magnetic wheels for rotative applications PMIS4, PMIR5

Variant e: PMIS4, PMIR 5 POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area Highest

Process displays For standard signals, temperature, resistance measurement

Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions

E Series 9.00 (1/2) E series

Clamp-on AC/DC current probes E Series The clamps use Hall effect technology for the measurement of AC and DC currents from several milliamps to over 100 A. The elongated, narrow design of these clamps

Servo Amplifier 4-Quadrant PWM for Brushless DC-Servomotors

Servo Amplifier -Quadrant PWM for Brushless DC-Servomotors Series BLD 010 Operating Instructions Index Chapter 1. Description 2. Illustration 3. Specification. Dimensions. Safety notes.1 Skilled personnel.2

B25A20FAC SERIES BRUSHLESS SERVO AMPLIFIERS Model: B25A20FAC 120VAC Single Supply Operation

B25A20FAC Series B25A20FAC SERIES BRUSHLESS SERVO AMPLIFIERS Model: B25A20FAC 120VAC Single Supply Operation FEATURES: All connections on front of amplifier Surface-mount technology Small size, low cost,

Ø20mm (.79-in) 1954 n n n n n n n n n n n n n n. E1954 n n n n n n n gcm 2

HAYD: 03 756 744 G4 9000 Series: Ø 0 mm (.79-in) Can-Stack Stepper Motor Linear Actuator Haydon 9000 Series generates the highest force of any similar size linear actuator stepper motor. Utilizing high

TRD-J Series Incremental Encoders

Series Incremental Encoders Features mm thick shaft and ø5 mm body Vibration and shock resistant metal slit plate durable at 1, P/R Operating voltage ranging from 4.75 to 3 VDC Totem-pole output facilitating

HMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton

Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates

SAX..P. Electromotoric actuators for valves ACVATIX. with a 20 mm stroke

s 4 509 ACVATIX Electromotoric actuators for valves SAX..P with a 20 mm stroke SAX31P.. Operating voltage AC 230 V, 3-position control signal SAX61P.. Operating voltage AC/DC 24 V, control signal DC 0

Actuator LA12 PRODUCT DATA SHEET

PRODUCT DATA SHEET Actuator LA12 Thanks to its small size and outstanding performance, the actuator LA12 provides a practical and cost-effective alternative to small-scale traditional hydraulic and pneumatic

Nokeval. Operators manual. Signal converter 641. No P

Nokeval No 00702P Operators manual Signal converter 61 1 Manufacturer recomendations: Use always shielded signal cables Install equipment to metall housing If plastic housings are used, it must be installed

Data Sheet for Angle Sensors

ETA25PM - R ETA25PM - F ETA25PM - TS 10 to 100-times longer life compared with multiturn potentiometers Free user programmable start and end position (electrical angle 10 up to 72000 ) Simple user programming

OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE. ISO-STIM 01D STIMULUS ISOLATION UNIT ±100 V / ±10 ma, bipolar output

OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE ISO-STIM 01D STIMULUS ISOLATION UNIT ±100 V / ±10 ma, bipolar output VERSION 4.0 npi 2014 npi electronic GmbH, Bauhofring 16, D-71732 Tamm, Germany

3Specifications CHAPTER THREE IN THIS CHAPTER

CHAPTER THREE 3Specifications IN THIS CHAPTER Drive Specifications SM and NeoMetric Motor Specifications SM and NeoMetric Motor / Curves SM and NeoMetric Motor Dimensions SM and NeoMetric Encoder Specifications

02/11/2015

Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.

PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical

Absolute encoders - SSI

with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics

Magnetic Encoder MEM 22

Description The MEM 22 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder MEM22 is designed

Dial-type digital bar graph. LEDs for Open Collector, Relays and Warning Indicator

Specifications General Input Channels One Input Types Digital (S 3 L) Serial ASCII, TTL level, 9600 bps Frequency Range 0.5 to 1500 Hz Accuracy 0.5% of reading Measurement Types Flow, ph/orp, Conductivity/Resis

Measuring current transformers of the W AB(P) series

Measuring current transformers of the W AB(P) series W-AB(P)_D00074_02_D_XXEN/07.2017 Measuring current transformers of the W AB(P) series Product description Measuring current transformers of the W -AB

Specification For Approval

Specification For Approval Customer : Description : Customer Part No. : Delta Model No. : Safety Model No. : Sample Issue No. : Sample Issue Date : EC FAN GTB040PUD26R N1 GTB040PUD26 05/24/2017 Rev : Please

Data Sheet. Stepper Motor Drive Boards. Features

Data Pack B Issued March 0-6 Data Sheet Stepper Motor Drive Boards Unipolar stepper motor drive board (RS stock no. 7-6) and bipolar stepper motor drive board (RS stock no. -906) The unipolar drive board

PD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description

Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer

For Reference Only DUAL-OUTPUT HALL-EFFECT SWITCH FEATURES. ABSOLUTE MAXIMUM RATINGS at T A = +25 C

Data Sheet 27633b Type UGN3235K Hall-effect sensor ICs are bipolar integrated circuits designed for commutation of brushless dc motors, and other rotary encoding applications using multi-pole ring magnets.

RoHS Directive-Compliant Compact Linear Actuators DRL Series. Features

Motorized ctuators RoHS Directive-Compliant Compact Linear ctuators DRL Series In the compact linear actuator DRL Series, the drive mechanism adopts a -phase stepping motor with ball screw. This series

USER MANUAL FOR THE LM2901 QUAD VOLTAGE COMPARATOR FUNCTIONAL MODULE

USER MANUAL FOR THE LM2901 QUAD VOLTAGE COMPARATOR FUNCTIONAL MODULE LM2901 Quad Voltage Comparator 1 5/18/04 TABLE OF CONTENTS 1. Index of Figures....3 2. Index of Tables. 3 3. Introduction.. 4-5 4. Theory

IST-KIT-UR-G Page 1 of 9 KIT-UR-G REVISIONS

Page 1 of 9 MOUNTING INSTRUCTIONS AND OPERATING MANUAL KIT-UR-G REVISIONS DATE REVISION MAIN CHANGES 2017/10/17 Edition A First release 2017/11/23 Edition B Replaced jaws screws (old VITE-016, new VITE-031)

Data Sheet MEM 22. Incremental Encoder Magnetic

Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM 22 IE Rev.1.9 / 16.05.2017 info@pwb-encoders.com

Solid State Pressure Sensors D8M

Solid State Pressure Sensors D8M Solid State Pressure Sensors with Analog, Pulse or Frequency Outputs Compact housing measures 30L x 30W x 12.4H mm. Accept 4 mm OD tubing (D8M-A1, -R1); 3 mm OD tubing

Data Sheet for Precision Potentiometer

Electrical Data 3turn 5turn 1turn Effective electrical angle of rotation 1.) 18 ±5 18 ±5 36 ±5 Total resistance 1.) 2 Ohm..5 kohm 2 Ohm..1 kohm Resistance tolerance ±3% (±1%) Independent linearity (best

Conductive Sensors 2 to 4-point level controller Type CL with potentiometer

Conductive Sensors to 4-point level controller Type CL with potentiometer Conductive level controller Adjustment of sensitivity operating resistance from 50Ω to 500KΩ Multiple combinations of filling and

LED control gear Compact fixed output. Uconverter LCI 50 W 1050 ma N020 TOP series Ø4,5. Ordering data

Product description 1-channel ED control gear Independent ED control gear for indoor use Output current and output voltage adjustable output input channel ominal life of 50,000 h (at ta max. with a failure

Cable transducer Analog output / redundant Measuring length absolute up to 5 m

Features Magnetic sensing method Resolution: 12 bit Interface analog 0...10 V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing

Operating Manual NS20K

ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße 13, D 74523 Schwäbisch Hall + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA Mains Monitoring Digital Panelmeters MINIPAN

EXPERIMENT 6 REPORT Bipolar Junction Transistor (BJT) Characteristics

Name & Surname: ID: Date: EXPERIMENT 6 REPORT Bipolar Junction Transistor (BJT) Characteristics Objectives: 1. To determine transistor type (npn, pnp),terminals, and material using a DMM 2. To graph the

Sorensen HPD Series 300 W 5 20 A. 300 Watt DC Power Supply with Near-Linear Performance V. with automatic crossover and mode indication

Sorensen HPD Series 300 W 300 Watt DC Power Supply with Near-Linear Performance 15 60 V with automatic crossover and mode indication 5 20 A 115 230 The Sorensen High Power Density (HPD) Series provides

NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800

NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:

SAT.. Electromotoric actuators for valves ACVATIX. with a 5.5 mm stroke and 300 N positioning force

4 584 ACVATIX Electromotoric actuators for valves SAT.. with a 5.5 mm stroke and 300 N positioning force SAT31.. Operating voltage AC 230 V, 3-position control signal SAT61.. Operating voltage AC/DC 24

Connection and Operation

Connection and Operation Names and Functions of Parts 4 1 Monitor Display LED Indicators DG60 1 5 Motor Connector Power Connector Indication Color Function When Activated OPERATI Green Power Supply Indication

400 (±2,5 V/ V/ ,3% V4A

LVDT Inductive Position Transducer - Hydraulic Series Series Hydraulic position measurement in hydraulic cylinders of machine controls ranges 10...300 mm temperature -40...+150 C (sensors) 0...+60 C (external

Driver. 3 Extension Cables ( Page E-155)

Motorized ctuators System Configuration Not supplied DRS Series Compact Linear ctuator ccessories (Sold separately) Mounting Plates ( Page E-54) Limit Sensor (Connected by the customer) 2 DIN Rail Mounting

TECHNICAL DATASHEET #TDAX032100

Preliminary TECHNICAL DATASHEET TDAX032100 2 Bipolar Analog/Digital and 8 Universal Signal Inputs Controller CAN (SAE J1939), Ethernet Two +5V references DIN rail mount P/N: AX032100 Features: SAE J1939

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT

Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional

EEE 201 CIRCUIT THEORY I EXPERIMENT 3

EEE 0 CIRCUIT THEORY I OLTAGE DIIDER 3. Objectives: oltage Divider in No-load Operation: Measurement of the voltage ratios on a voltage divider in no-load operation. oltage divider Formula. oltage Divider

SELECTION GUIDE. BULLETIN 156 Solid-State Contactors

SELECTION GUIDE BULLETIN 156 Product Overview/Product Selection Bulletin 156 The Bulletin 156 are ideal replacements for electro-mechanical contactors where fast and demanding switching of loads such

SAX.. ACVATIX Electromotoric actuators for valves. with a 20 mm stroke

s 4 501 ACVATIX Electromotoric actuators for valves SAX.. with a 20 mm stroke SAX31.. Operating voltage AC 230 V, 3-position control signal Operating voltage AC/DC 24 V, control signal DC 0 10 V, 4 20

FA-3300 Heavy Duty Electric Actuator. Features and Benefits. FA-3300 Actuator with VG8000 valve. Constant running time. Fixed close-off force.

European Electronic Controls Catalogue Section E Product Bulletin FA-3300 Issue Date 0998 FA-3300 Heavy Duty Electric Actuator I ntroduction The FA-3300 series synchronous motor-driven, reversible, heavy

HMI Components. Series

Edition 03/2013 HMI Components Series Characteristics The Series are LEDs for use with all EAO s illuminated switches (as accessories). The following pages show a representative selection of LEDs. Content

SIGNAL INTERFACE MODULE

SIGNAL INTERFACE MODULE FEATURES Optically isolated inputs Field adjustable output Second onboard DC supply Positive / negative voltage output APPLICATIONS Phase cut to ma / VDC conversion Signal scaling

Near Infrared Light Ring Series OPA80 and OPA83 Series

Features Designed for Near Infrared wavelength Cameras Daylight Light sensor available Variety of ring sizes Surface Mount or Through Hole s Product Photo Here Description: The OPA80 through OPA83 series

Acceleration sensors With relay output for limit monitoring Analog / CANopen

Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic

Transducer for Measurement Bridges SCM90, SIGS15

Transducer for Measurement Bridges SCM90, SIGS15 General Description Transducer for measurement bridges for DINrails and for printed circuit boards. Programmable ranges and bridge supply, voltage or current

ID/HX-EP SERIES DIGITAL OUTPUT

ID/HX-EP SERIES DIGITAL OUTPUT Utilizing an incremental encoder as the sensor, the ID/HX-EP Series position transducer provides a two channel square wave current sinking output signal in quadrature. The

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:

Emergency lighting units EM powerled

CPS FX SR 50 W ED Driver for AC and DC power supplies Product description Independent fixed output ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) Emergency lighting function

WIND VANE THIES FIRST CLASS 2014 TMR

WIND VANE THIES FIRST CLASS 2014 TMR ORDER - N O ELECTRICAL OUTPUT ELECTRICAL SUPPLY HEATING SUPPLY MODEL IN EOL MANAGER 4.3151.00.173 0...5 V 4.3151.10.173 0...5 V 12 24 VDC 4.5 ma + Iout 12 24 VDC 4.5

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,

02/11/2015

Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.

Connection to the sensor is with simple flying leads for customer termination. 1 Page NRH300DP Rev B 09/15

No-contact, Hall-effect technology Wear free unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360 5V or 9-30V supply options Dual redundant outputs Analog output 0.5-4.5V

Ultimate Actuator Drivebox 30A Quick start guide

2016 Ultimate Actuator Drivebox 30A Quick start guide info@e-tronix.cz e-tronix s.r.o. 1.1.2016 OBSAH Identification... 3 Serial Number... 3 Manufacturer and reseller contact... 4 Before Start... 4 UAD30A

87000 Series Size 34 Hybrid Linear Actuators

87000 Series Single Stack Stepper Motor Linear Actuators 87000 Series Hybrid Linear Actuators Our largest, most powerful linear actuator incorporates the same precision, high performance and durable patented

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description

Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.

NDR6110 Single Channel Dynamic Driver for Piezoelectric Actuators

NDR61 Driver Series NDR6110 Single Channel Dynamic Driver for Piezoelectric Actuators Features Bipolar and unipolar output load Galvanic separation of the output Adjustable input range and phase inversion

Evaluation Kit: MPS 160 ASIC. Magneto Encoder ASIC

Evaluation Kit: MPS 160 ASIC Magneto Encoder ASIC Table of Contents 1. Overview 2. Mounting Instructions 2.1. Sensor Orientation 2.2. Pitch Radius 2.3. Air Gap 3. Magnetic Target 4. Output 4.1. Optional

Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT

Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,

Wimesure 54, rue de Versailles CHEVREUSE Tél Fax

No-contact, Hall-effect technology Wear free unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360 5V or 9-30V supply options Dual redundant outputs Analog output 0.5-4.5V

HANDS-ON LAB INSTRUCTION SHEET MODULE 3 CAPACITORS, TIME CONSTANTS AND TRANSISTOR GAIN

HANDS-ON LAB INSTRUCTION SHEET MODULE 3 CAPACITORS, TIME CONSTANTS AND TRANSISTOR GAIN NOTES: 1) To conserve the life of the Multimeter s 9 volt battery, be sure to turn the meter off if not in use for

Precision motion control

Precision motion control D.C. miniature gearmotors technology in motion or +44 (0)52 5344 motor index general guide gearmotors page 3 D.C. miniature gearmotors 71 B138F B138F.4/ BS138F BS138F.4/ H9 HV155

Preset counters, electronic

The Codix 716 / 717 can be used universally. These preset pulse, tachometers or preset timers with up to 2 presets can solve a wide variety of control and monitoring tasks in every application. With their

DPS Series 5W, 10W, 18W AC/DC DIN Rail Power Supplies

DPS Series 5W, 1W, 18W AC/DC DI Rail Power Supplies AC - DC din rail mountable 5W, 1W and 18W class 2 power supplies E A R G U A R A T E E z U, cu, CE z Universal input 9~265VAC z High efficiency up to

Solid-State Digital Counter H7AN

Solid-State Digital Counter Preset and Totalizing Counters with Up to 8-Digit LED Displays Draw-out construction allows setting, servicing without disconnecting wiring Choose from selectable UP/DOWN or

SAX.. ACVATIX Electromotoric actuators for valves. with a 20 mm stroke

s 4 501 ACVATIX Electromotoric actuators for valves SAX.. with a 20 mm stroke SAX31.. Operating voltage AC 230 V, 3-position control signal SAX61.. Operating voltage AC/DC 24 V, control signal DC 0 10

2601 System SourceMeter 2602 Multi-Channel I-V Test Solutions

601 System SourceMeter 60 Multi-Channel I-V Test Solutions SPECIFICATION CONDITIONS This document contains specifications and supplemental information for the Models 601 and 60. Specifications are the

1/23/2003. Sensor presentation

1/23/2003 Sensor presentation Product Scope A Sensor is a device intended to transmit a signal corresponding to the primary current or voltage to the secondary equipment. Power IT Sensors are typically

Data Sheet MEM 16. Incremental Encoder Magnetic

Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM16IE Rev.2.1 / 15.12.2016 info@pwb-encoders.com

DC Current Transducers

Current Transducers are designed to provide an analog current reading for monitoring, data logging and panel meter applications. NK Technologies current transducers offer a choice of 5 VDC, 1 VDC or ma