HMI Components. Series

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "HMI Components. Series"

Transcription

1 Edition 03/2013 HMI Components Series Characteristics The Series are LEDs for use with all EAO s illuminated switches (as accessories). The following pages show a representative selection of LEDs.

2

3 Content Overview Illumination LED T1 3/4 MG 4 Single-LED T5.5 6 Single-LED T6.8 8 LED BA9s LED BA9s Fail Safe 12 Accessories 14 Technical data 16 Application guidelines 17 Index 18 3

4 Illumination LED T1 3/4 MG 16 max. Ø6.1 max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable lamp remover Part No (Series Swisstac Part No ) When using AC/DC types with AC operation, slight flickering can occure Luminous intensity data of the LEDs on direct voltage Electrical and optical data are measured at 25 C If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the first mentioned colour will light up, with inverted polarity the second colour will ligth up The specified versions are built with a protection diode (halve wave rectifier) in series and the LED Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 6 VDC + % 15 ma ±15 % 350 mcd 630 nm -2J kg 12 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -2J kg 24 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -2J kg 28 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm -2J kg 48 VAC/DC + % 4/8 ma ±15 % 200 mcd 630 nm -2J kg Single-LED yellow 6 VDC + % 15 ma ±15 % 300 mcd 587 nm -2J kg 12 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -2J kg 24 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -2J kg 28 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm -2J kg 48 VAC/DC + % 4/8 ma ±15 % 180 mcd 587 nm -2J kg Single-LED green 6 VDC + % 7 ma ±15 % 50 mcd 525 nm -2J kg 12 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2J kg 24 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2J kg 28 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2J kg 48 VAC/DC + % 2/4 ma ±15 % 600 mcd 525 nm -2J kg 4

5 Illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED blue 6 VDC + % 15 ma ±15 % 680 mcd 470 nm -2J kg 12 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -2J kg 24 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -2J kg 28 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm -2J kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd 470 nm -2J kg Single-LED white 6 VDC + % 15 ma ±15 % 750 mcd x0.31/y0.32 nm -2J kg 12 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -2J kg 24 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -2J kg 28 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm -2J kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd x0.31/y0.32 nm -2J kg Bi-colour LED Bi-colour LED red/green 24 VDC + % 15/14 ma ±15 % 600/630 mcd 625/525 nm -A A kg 5

6 Illumination Single-LED T max. + Ø6 max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable LED remover Part No (Series Swisstac Part No ) When fitting the LED elements pay attention to the polarity. An instruction can be found in the chapter «Application guidelines» of the corresponding series When using AC/DC types with AC operation, slight flickering can occure Electrical and optical data are measured at 25 C Luminous intensity data of the LEDs on direct voltage The specified versions are built with a protection diode (halve wave rectifier) in series and the LED Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 6 VDC + % 15 ma ±15 % 350 mcd 630 nm kg 12 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm kg 24 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm kg 28 VAC/DC + % 7/14 ma ±15 % 330 mcd 630 nm kg 48 VAC/DC + % 4/8 ma ±15 % 200 mcd 630 nm kg Single-LED yellow 6 VDC + % 15 ma ±15 % 300 mcd 587 nm kg 12 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm kg 24 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm kg 28 VAC/DC + % 7/14 ma ±15 % 280 mcd 587 nm kg 48 VAC/DC + % 4/8 ma ±15 % 180 mcd 587 nm kg Single-LED green 6 VDC + % 7 ma ±15 % 50 mcd 525 nm kg 12 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm kg 24 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm kg 28 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm kg 48 VAC/DC + % 2/4 ma ±15 % 600 mcd 525 nm kg 6

7 Illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED blue 6 VDC + % 15 ma ±15 % 680 mcd 470 nm kg 12 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm kg 24 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm kg 28 VAC/DC + % 7/14 ma ±15 % 650 mcd 470 nm kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd 470 nm kg Single-LED white 6 VDC + % 15 ma ±15 % 750 mcd x0.31/y0.32 nm kg 12 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm kg 24 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm kg 28 VAC/DC + % 7/14 ma ±15 % 700 mcd x0.31/y0.32 nm kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd x0.31/y0.32 nm kg 7

8 Illumination Single-LED T max. + Ø7.1 max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable LED remover Part No When fitting the LED elements pay attention to the polarity. An instruction can be found in the chapter «Application guidelines» of the corresponding series When using AC/DC types with AC operation, slight flickering can occure Luminous intensity data of the LEDs on direct voltage Electrical and optical data are measured at 25 C The specified versions are built with a protection diode (halve wave rectifier) in series and the LED Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 6 VDC + % 17 ma ±15 % 400 mcd 630 nm -2K kg 12 VAC/DC + % 9/17 ma ±15 % 400 mcd 630 nm -2K kg 24 VAC/DC + % 9/17 ma ±15 % 400 mcd 630 nm -2K kg 28 VAC/DC + % 9/17 ma ±15 % 400 mcd 630 nm -2K kg 48 VAC/DC + % 4/8 ma ±15 % 200 mcd 630 nm -2K kg Single-LED yellow 6 VDC + % 17 ma ±15 % 340 mcd 340 nm -2K kg 12 VAC/DC + % 9/17 ma ±15 % 340 mcd 340 nm -2K kg 24 VAC/DC + % 9/17 ma ±15 % 340 mcd 340 nm -2K kg 28 VAC/DC + % 9/17 ma ±15 % 340 mcd 340 nm -2K kg 48 VAC/DC + % 4/8 ma ±15 % 180 mcd 340 nm -2K kg Single-LED green 6 VDC + % 7 ma ±15 % 50 mcd 525 nm -2K kg 12 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2K kg 24 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2K kg 28 VAC/DC + % 4/7 ma ±15 % 50 mcd 525 nm -2K kg 48 VAC/DC + % 2/4 ma ±15 % 600 mcd 525 nm -2K kg 8

9 Illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED blue 6 VDC + % 17 ma ±15 % 780 mcd 470 nm -2K kg 12 VAC/DC + % 9/17 ma ±15 % 780 mcd 470 nm -2K kg 24 VAC/DC + % 9/17 ma ±15 % 780 mcd 470 nm -2K kg 28 VAC/DC + % 9/17 ma ±15 % 780 mcd 470 nm -2K kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd 470 nm -2K kg Single-LED white 6 VDC + % 17 ma ±15 % 850 mcd x0.31/y0.32 nm -2K kg 12 VAC/DC + % 9/17 ma ±15 % 850 mcd x0.31/y0.32 nm -2K kg 24 VAC/DC + % 9/17 ma ±15 % 850 mcd x0.31/y0.32 nm -2K kg 28 VAC/DC + % 9/17 ma ±15 % 850 mcd x0.31/y0.32 nm -2K kg 48 VAC/DC + % 4/8 ma ±15 % 400 mcd x0.31/y0.32 nm -2K kg 9

10 Illumination LED BA9s 25 max. Ø max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable LED remover Part No (Series 44 Part No ) Luminous intensity data of the LEDs on direct voltage Electrical and optical data are measured at 25 C The specified 6 VDC, 24 VDC Bi-colour; 130 VAC, 130 DC und 230 VAC versions are built with a protection diode The specified 12, 24, 28, 48 VAC/DC versions are built with a bridge rectifier If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the first mentioned colour will light up, with inverted polarity the second colour will ligth up The specified 130 VAC types are developed to run on a supply voltage of 130 VAC only. An operation at a higher supply voltage using commercial lampholders with integrated resistors, is not approved Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 6 VDC + % 17 ma ±15 % 400 mcd 630 nm kg 12 VAC/DC + % 16 ma ±15 % 390 mcd 630 nm kg 24 VAC/DC + % 15 ma ±15 % 350 mcd 630 nm kg 28 VAC/DC + % 13 ma ±15 % 300 mcd 630 nm kg 48 VAC/DC + % 8 ma ±15 % 200 mcd 630 nm kg 130 VDC + % 3 ma ±15 % 120 mcd 630 nm kg 130 VAC + % 5 ma ±15 % 180 mcd 630 nm -2H kg 230 VAC + % 3 ma ±15 % 120 mcd 630 nm -2H kg Single-LED yellow 6 VDC + % 17 ma ±15 % 340 mcd 587 nm kg 12 VAC/DC + % 16 ma ±15 % 340 mcd 587 nm kg 24 VAC/DC + % 15 ma ±15 % 300 mcd 587 nm kg 28 VAC/DC + % 13 ma ±15 % 270 mcd 587 nm kg 48 VAC/DC + % 8 ma ±15 % 180 mcd 587 nm kg 130 VDC + % 3 ma ±15 % 1 mcd 587 nm kg

11 Illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Weight Single-LED yellow 130 VAC + % 5 ma ±15 % 160 mcd 587 nm -2H kg 230 VAC + % 3 ma ±15 % 1 mcd 587 nm -2H kg Single-LED green 6 VDC + % 7 ma ±15 % 50 mcd 525 nm kg 12 VAC/DC + % 7 ma ±15 % 50 mcd 525 nm kg 24 VAC/DC + % 7 ma ±15 % 50 mcd 525 nm kg 28 VAC/DC + % 7 ma ±15 % 50 mcd 525 nm kg 48 VAC/DC + % 4 ma ±15 % 600 mcd 525 nm kg 130 VDC + % 2 ma ±15 % 300 mcd 525 nm kg 130 VAC + % 3 ma ±15 % 450 mcd 525 nm -2H kg 230 VAC + % 2 ma ±15 % 300 mcd 525 nm -2H kg Single-LED blue 6 VDC + % 17 ma ±15 % 780 mcd 470 nm kg 12 VAC/DC + % 16 ma ±15 % 720 mcd 470 nm kg 24 VAC/DC + % 15 ma ±15 % 680 mcd 470 nm kg 28 VAC/DC + % 13 ma ±15 % 590 mcd 470 nm kg 48 VAC/DC + % 8 ma ±15 % 400 mcd 470 nm kg 130 VDC + % 3 ma ±15 % 200 mcd 470 nm kg 130 VAC + % 5 ma ±15 % 230 mcd 470 nm -2H kg 230 VAC + % 3 ma ±15 % 200 mcd 470 nm -2H kg Single-LED white 6 VDC + % 17 ma ±15 % 850 mcd x0.31/y0.32 nm kg 12 VAC/DC + % 16 ma ±15 % 800 mcd x0.31/y0.32 nm kg 24 VAC/DC + % 15 ma ±15 % 750 mcd x0.31/y0.32 nm kg 28 VAC/DC + % 13 ma ±15 % 650 mcd x0.31/y0.32 nm kg 48 VAC/DC + % 8 ma ±15 % 400 mcd x0.31/y0.32 nm kg 130 VDC + % 3 ma ±15 % 150 mcd x0.31/y0.32 nm kg 130 VAC + % 5 ma ±15 % 250 mcd x0.31/y0.32 nm -2H kg 230 VAC + % 3 ma ±15 % 150 mcd x0.31/y0.32 nm -2H kg Bi-colour LED Bi-colour LED red/green 24 VDC + % 15 ma ±15 % 1200/900 mcd 625/525 nm -2H12.314A kg Bi-colour LED red/yellow 24 VDC + % 15 ma ±15 % 1200/550 mcd 625/589 nm -2H12.314B kg Bi-colour LED yellow/green 24 VDC + % 15 ma ±15 % 900/550 mcd 525/589 nm -2H12.314C kg 11

12 Illumination LED BA9s Fail Safe 25 max. Ø max. Product can differ from the current configuration. Dimensions [mm] Additional Information A suitable LED remover Part No (Series 44 Part No ) Luminous intensity data of the LEDs on direct voltage Electrical and optical data are measured at 25 C The specified 72 and 1 VAC/VDC versions are built with a protection diode Specified 72 and 1 VAC/VDC versions are built with a bridge rectifier In case one LED fails, the other pair of still functioning LED s is working. The light output then is half in order to indicate the malfunction and shows this way the need for replacement Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination LED colour Operating voltage Operation current Lumi. intensity Dom. wavelength Part No. Wiring diagram Weight Multi-LED Fail Safe Multi-LED rot 72 VDC + % 2.2 ma ±15 % 4 x 190 mcd 625 nm -4H21.32P kg 1 VDC + % 2 ma ±15 % 4 x 170 mcd 625 nm -4H22.32P kg Multi-LED yellow 72 VDC + % 2.2 ma ±15 % 4 x 190 mcd 589 nm -4H21.34P kg 1 VDC + % 2 ma ±15 % 4 x 170 mcd 589 nm -4H22.34P kg Multi-LED green 72 VDC + % 2.2 ma ±15 % 4 x 120 mcd 525 nm -4H21.35P kg 1 VDC + % 2 ma ±15 % 4 x 170 mcd 525 nm -4H22.35P kg Multi-LED blue 72 VDC + % 2.2 ma ±15 % 4 x 30 mcd 465 nm -4H21.36P kg 1 VDC + % 2 ma ±15 % 4 x 25 mcd 465 nm -4H22.36P kg Multi-LED white 72 VDC + % 2.2 ma ±15 % 4 x 160 mcd -4H21.39P kg 1 VDC + % 2 ma ±15 % 4 x 145 mcd -4H22.39P kg 12

13 Illumination Bridge rectifier Wiring diagram 1 13

14 Accessories Illumination LED remover for T1 3/4 MG Additional Information p Caution: A switching process might be released when replacing the lamp Product attribute Part No. Weight LED remover für series 22, 31, 41, 51, 61, kg for series Swisstac kg LED remover for T5.5 Additional Information p Caution: A switching process might be released when replacing the lamp Product attribute Part No. Weight LED remover for series 01, kg LED remover for T6.8 Additional Information p Caution: A switching process might be released when replacing the lamp Product attribute Part No. Weight LED remover for series 02, kg 14

15 LED remover for BA9s Accessories Additional Information p Caution: A switching process might be released when replacing the lamp Product attribute Part No. Weight LED remover for series kg LED remover for series kg 15

16 Technical data Technical Data Electrical characteristics Operating voltage tolerance + % Mechanical characteristics Environmental conditions Storage temperature -25 C +80 C Service temperature -20 C +60 C Standards Lamp base Base Standard T1 3/4 MG DIN EN : S5,7s T5.5 DIN T6.8 DIN BA9s DIN EN : BA9s EAO reserves the right to alter specifications without further notice. 16

17 Application guidelines LED used in Base Series T 1 3/4 T 5.5 T 6.8 BA9s Swisstac

18 Index Index from Part No. Part No. Page Part No. Page H12.314A H12.314B H12.314C H H H H H H H H H H J J J J J J J J J J J J J J J J J J J J J J J J J K K K K K K K K K K K K K K K K K K K K K K K K K H21.32P H21.34P H21.35P H21.36P H21.39P H22.32P H22.34P H22.35P H22.36P H22.39P A A

Q6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS

Q6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS IND-Q6-17-07 LED INDICATORS DISTINCTIVE FEATURES 3 mm colored diffused epoxy lens or 3 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.0 x 0.5) solder lug terminals, pins

More information

550-xx mm LED CBI. Circuit Board Indicator Sloped Back Housing, Quad Block x x x 4

550-xx mm LED CBI. Circuit Board Indicator Sloped Back Housing, Quad Block x x x 4 5.97 [.235] 3.0 [.118] 5mm LED CBI Circuit Board Indicator Sloped Back Housing, Quad Block 2.97 [.117] Features.35 [.250].35 [.250] 25 [.984] ID RECOMMENDED P.C. HOLE PATTERN 4.9 [.185] A Red Cathode for

More information

SURFACE MOUNT LED RED/GREEN, 1210 PACKAGE

SURFACE MOUNT LED RED/GREEN, 1210 PACKAGE SURFACE MOUNT LED RED/GREEN, 1210 PACKAGE Industry Standard Package RoHS Compliant Two Chips in One Package Water Clear Lens Wide Viewing Angle Ideal for Status Indication and Lighting Bivar Surface Mount

More information

LED Lighting - Error Consideration for Illuminance Measurement

LED Lighting - Error Consideration for Illuminance Measurement LED Lighting - Error Consideration for Illuminance Measurement One of the most important characteristics of a luxmeter is matching to the sensitivity of the human eye V(λ). V(λ) is the spectral luminous

More information

Optical laser distance sensors. Dimensioned drawing

Optical laser distance sensors. Dimensioned drawing Dimensioned drawing en 02-2012/11 50112361 150 800mm 10-30 V DC We reserve the right to make changes DS_ODSL96BS800_en_50112361.fm Small laser light spot for measurements on small, structured or metallic

More information

Data Sheet. ASMT-Lx50 Flexible Light Strip Module. Features. Description. Applications

Data Sheet. ASMT-Lx50 Flexible Light Strip Module. Features. Description. Applications ASMT-Lx50 Flexible Light Strip Module Data Sheet Description Flexible Light Strip Module is high performance light tube produced by Avago Technologies, integrating LEDs solution with excellent thermoplastic

More information

Resistor LED for 12 V Supply Voltage

Resistor LED for 12 V Supply Voltage Resistor LED for 12 V Supply Voltage V S 19228-2 Out 19228-1 FEATURES With current limiting resistor for 12 V Cost effective: save space and resistor cost Standard Ø 3 mm (T-1) package High luminous intensity

More information

DENISON HYDRAULICS Proportional Pressure Control Valves

DENISON HYDRAULICS Proportional Pressure Control Valves DENISON HYDRAULICS Proportional Pressure Control Valves Series 4VP01 Cetop 03 Publ. 3-EN 2200-B, replaces 3-EN 2200-A FEATURES, SYMBOLS x FEATURES Direct operated pressure relief valve for flow up-to max.

More information

SURFACE MOUNT LED LAMP SUPER BRIGHT 0805

SURFACE MOUNT LED LAMP SUPER BRIGHT 0805 PACKAGE DIMENSIONS.87 (2.2).71 (1.8).57 (1.45).41 (1.5) R.8 (.2) TOP CATHODE.55 (1.4).12 (.3) 2X.47 (1.2).41 (1.5).24 (.6) SIDE.16 (.4) 2X.47 (1.2) BOTTOM NOTE: + - POLARITY Dimensions for all drawings

More information

3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color

3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color 3mm (T1) Package Discrete LED YELLOW/GREEN, Tri-Color Bi-Color 3BC-3-Y/G-F Industry Standard 3mm (T1) Package RoHS Compliant White Diffused Lens Available in Flange (F) Style 3-Lead Bi-Color LED Ideal

More information

HMI Components. Series. Front mounting Glass mounting. Illuminated pushbutton Indicator Warning indicator Emergency call button. Public transportation

HMI Components. Series. Front mounting Glass mounting. Illuminated pushbutton Indicator Warning indicator Emergency call button. Public transportation dition 09/015 HMI Components 57 Series Characteristics The Series 57 is especially suited for: ront mounting Glass mounting It is characterised by a extra large operating area, two independently illuminated

More information

Recommended Land Pattern: [mm] Optical Properties: 3,5 ±0,2 3,2 ±0,2

Recommended Land Pattern: [mm] Optical Properties: 3,5 ±0,2 3,2 ±0,2 Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power Dissipation (Blue) P Diss B 18 mw,63 typ. 4 2 3 1 2,2 ±,2

More information

3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color

3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color 3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color 3BC-Y/G-X Industry Standard 3mm (T1) Package RoHS Compliant 2-Lead Bi-Color LED White Diffused Lens Available in Flange (F) and Shouldered (Blank) Lead

More information

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC TM LTH5MM12V Series 5mm (T-1 3/4) Through Hole Built in Resistor for 12VDC LTH5MM12VFR44 - White Water-Clear T-1 3/4 (5 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 16 / 2 12 Volt Applications Automotive

More information

ADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W

ADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000

More information

SURFACE MOUNT LED LAMP Super Bright (0603) Chip Type - Water Clear

SURFACE MOUNT LED LAMP Super Bright (0603) Chip Type - Water Clear PACKAGE DIMENSIONS.63 (1.6).55 (1.4).35 (.9).28 (.7).31 (.8).47 (1.2) TOP SIDE.12 (.3) FEATURES AllnGaP technology Ultra-miniature Industrial standard footprint Water clear optics Moisture-proof packaging

More information

Data Sheet. Description. Features. Applications

Data Sheet. Description. Features. Applications LED Light Bars HLCP-A100/-B100/-C100/D100/-E100/-F100/-G100/-H100 HLMP-2300/-2350/-2400/-2450/-2500/-2550 HLMP-2600/-2620/-2635/-2655/-2670/-2685 HLMP-2700/-2720/-2735/-2755/-2770/-2785 HLMP-2800/-2820/-2835/-2855/-2870/-2885

More information

3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color

3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color 3mm (T1) Package Discrete LED YELLOW/GREEN, Bi-Color 3SBCC-Y/G-X Industry Standard 3mm (T1) Package RoHS Compliant 2-Lead Super Bright Bi-Color LED Water Clear Lens Available in Flange (F) and Shouldered

More information

Express Delivery. Axial. Connection

Express Delivery. Axial. Connection HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

More information

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD. Features Side view LED. Lead frame package with individual 2 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions

More information

DOMINANT. Opto Technologies Innovating Illumination. 5mm Lamp AlInGaP : High Brightness DATA SHEET: Lamp Type LED - 5mm Round. Features: Applications:

DOMINANT. Opto Technologies Innovating Illumination. 5mm Lamp AlInGaP : High Brightness DATA SHEET: Lamp Type LED - 5mm Round. Features: Applications: DATA SHEET: 5mm Lamp AlInGaP : High Brightness Lamp Type LED - 5mm Round Synonymous with function and performance, the 5mm Round LED has superior performance in outdoor applications due to its well-defined

More information

Separate units: Blocks

Separate units: Blocks Separate units: Blocks LED BLOCKS Technical Info (p. 103) SCREW TERMINALS Part Number 3.8 LED 19.7 20.1 X1 X2 33EARL 9.9 19.7 21.5 18.2 12/24 V White Red Green Blue Yellow 33EAWL 33EARL 33EAGL 33EABL 33EAYL

More information

Rectangular Package Discrete LED RED/GREEN, 2 x 5 mm, Bi-Color

Rectangular Package Discrete LED RED/GREEN, 2 x 5 mm, Bi-Color Rectangular Package Discrete LED RED/GREEN, 2 x 5 mm, Bi-Color Rectangular Package RoHS Compliant White Diffused Lens Available in Shouldered Lead Frame style 3-Lead Bi-Color LED Ideal for Status Indication

More information

NSD Safety Mat Controller Modules Both Modules are compliant to OSHA & ANSI Standards - EN ISO EN EN 81-1 EN NSD VDC

NSD Safety Mat Controller Modules Both Modules are compliant to OSHA & ANSI Standards - EN ISO EN EN 81-1 EN NSD VDC Datasheet NSD Safety Mat Controller Modules Both Modules are compliant to OSHA & ANSI Standards - EN ISO 13849-1 EN 62061 EN 81-1 EN 50156-1 Approvals NSD-3580 24 VDC NSD-3590 115 TO 230 VAC Technical

More information

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC

LTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC TM LTH5MM12V Series 5mm (T-1 3/4) Through Hole Built in Resistor for 12VDC LTH5MM12VFR4100 - Red Water-Clear T-1 3/4 (5 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 16 / 20 12 Volt Applications Automotive

More information

High Intensity LED, Ø 5 mm Untinted Non-Diffused Package

High Intensity LED, Ø 5 mm Untinted Non-Diffused Package TLHE5., TLHG5., TLHK5. High Intensity LED, Ø 5 mm Untinted Non-Diffused Package DESCRIPTION 9223 The TLH.5.. series is a clear, non diffused 5 mm LED for outdoor application. These clear lamps utilize

More information

EAPL2214GA0-AM. SMD Mini Top View LEDs PRELIMINARY. Features. Applications.

EAPL2214GA0-AM. SMD Mini Top View LEDs PRELIMINARY. Features. Applications. PRELIMINARY Features P-LCC-2 package. Colorless clear resin. Wide viewing angle 120 o. Inner reflector and white package. Brightness: 710 to 1400mcd at 20mA Precondition: Bases on JEDEC J-STD 020D Level

More information

Data Sheet 1210 SMD LED Module LED

Data Sheet 1210 SMD LED Module LED Data Sheet 1210 SMD LED Module LED 1 Table of Contents General Informations:... 3 Electrical and Flux Characteristics... 4 Color Wavelength Diagram:... 6 Mechanical Dimensions:... 7 Electrical Connection:...

More information

High Efficiency LED in Ø 3 mm Clear Package

High Efficiency LED in Ø 3 mm Clear Package TLHG49, TLHR49, TLHY49 High Efficiency LED in Ø 3 mm Clear Package DESCRIPTION 9222 The TLH.49 series was developed for applications where high light output is requi. It is housed in a 3 mm clear plastic

More information

TLRG4420CU, TLRH4420CU, TLRO4420CU, TLRY4420CU Resistor LED for 12 V Supply Voltage

TLRG4420CU, TLRH4420CU, TLRO4420CU, TLRY4420CU  Resistor LED for 12 V Supply Voltage TLRG442CU, TLRH442CU, TLRO442CU, TLRY442CU Resistor LED for 12 V Supply Voltage V S DESCRIPTION 19228-2 Out 19228-1 These devices are developed for the automotive industry with special requirements as

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,

More information

HDSP-4830/4840/4850, HDSP-4832/4836 & HLCP-J Element Bar Graph Array. Features

HDSP-4830/4840/4850, HDSP-4832/4836 & HLCP-J Element Bar Graph Array. Features HDSP-//, HDSP-/ & HLCP-J -Element Bar Graph Array Data Sheet Description These -element LED arrays are designed to display information in easily recognizable bar graph form. The packages are end stackable

More information

Acceleration sensors With relay output for limit monitoring Analog / CANopen

Acceleration sensors With relay output for limit monitoring Analog / CANopen Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic

More information

Circuit diagram. Applications. Function. Function (Continued) Page 23 SNO 4062K /K-A /KM /KM-A

Circuit diagram. Applications. Function. Function (Continued) Page 23 SNO 4062K /K-A /KM /KM-A SNO 4062K Basic unit for emergency stop and guard door applications Basic unit as per DIN EN 60204-1 and EN ISO 13849-1 for single or twin channel emergency stop monitoring. PL e and category 4 as per

More information

Bridgelux Vesta Series Tunable White 9mm Array. Product Data Sheet DS152

Bridgelux Vesta Series Tunable White 9mm Array. Product Data Sheet DS152 Bridgelux Vesta Series Tunable White 9mm Array Product Data Sheet DS152 1 Introduction Vesta Series Vesta Series Tunable White Array products deliver adaptable light in a solid state lighting package.

More information

High Efficiency LED in Ø 3 mm Tinted Diffused Package

High Efficiency LED in Ø 3 mm Tinted Diffused Package TLHR44., TLHO44., TLHY44., TLHG44. High Efficiency LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 922 The TLH.44.. series was developed for standard applications like general indicating and lighting

More information

Resistor LED for 12 V Supply Voltage

Resistor LED for 12 V Supply Voltage TLRH44.CU, TLRO44.CU, TLRY44.CU, TLRG44.CU, TLRP44.CU Resistor LED for 12 V Supply Voltage V S DESCRIPTION 19228-2 Out 19228-1 These devices are developed for the automotive industry and other industries

More information

High Efficiency LED in Ø 3 mm Tinted Diffused Package

High Efficiency LED in Ø 3 mm Tinted Diffused Package TLHY44KL2 High Efficiency LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 922 The TLHY44KL2 series was developed for standard applications like general indicating and lighting purposes. It is housed

More information

Cree PLCC6 3 in 1 SMD LED CLX6F-BKB

Cree PLCC6 3 in 1 SMD LED CLX6F-BKB Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1372.002 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high reliability and high brightness LEDs

More information

65-11-GBC-Y0V1AAN0E-2T8-AM

65-11-GBC-Y0V1AAN0E-2T8-AM Features P-LCC-2 package. Colorless clear resin. Wide viewing angle 120 o. Inner reflector and white package. Brightness: 710 to 1400mcd at 20mA Precondition: Bases on JEDEC J-STD 020D Level 2 Qualification

More information

3mm 5mm (T1) ¾) Package Discrete LED

3mm 5mm (T1) ¾) Package Discrete LED 3mm 5mm (T1) ¾) Package Discrete LED LED AMBER/GREEN, RED/GREEN, Tri-Color Bi-Color 5BC-3-CA-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant White Diffused Lens Available in Flange (F) and Shouldered

More information

Technical Data Sheet Chip LED with Bi-Color(Multi-Color)

Technical Data Sheet Chip LED with Bi-Color(Multi-Color) Technical Data Sheet Chip LED with Bi-Color(Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow

More information

Torque Sensor Series 3000 and Series 4000

Torque Sensor Series 3000 and Series 4000 Properties Sensorshaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement range

More information

Technical Data Sheet Side View LED

Technical Data Sheet Side View LED Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free The product itself will remain within RoHS compliant version. Descriptions The 57-21series is available in soft orange, green,

More information

Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).

Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6). Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity

More information

Descriptions. Kingbright

Descriptions. Kingbright T-1 3/4 (5mm) BI-COLOR CYLINDRICAL LED LAMP Part Number: L-489EGWT Features Cylindrical type. Low power consumption. 3 leads with one common lead. Long life - solid state reliability. Reliable and rugged.

More information

Contents H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A. Solid-state Timer. Common to ALL Timers

Contents H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A. Solid-state Timer. Common to ALL Timers Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2 for Low Voltage, and EMC Directives. Approved by UL and CSA. Lloyds/NK approvals.

More information

SOT-23 SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions. Part Number: KM-23LYD

SOT-23 SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions. Part Number: KM-23LYD SOT-23 SURFACE MOUNT LED LAMP Part Number: KM-23LYD Yellow Features SOT-23 package surface mount LED lamp. Low power consumption. Long life - solid state reliability. Package: 2000pcs / reel. Moisture

More information

CUBE. Diode Laser System FEATURES

CUBE. Diode Laser System FEATURES CUBE Diode Laser System The Coherent CUBE laser is a compact all-in-one laser system. CUBE lasers offer wavelengths from 75 nm to 70 nm with output power as high as 00 mw. Based on laser diode technologies

More information

Luckylight. 0.54" Dual Digit Alphanumeric Displays. Technical Data Sheet. Model No: KWA-541XWB-Y

Luckylight. 0.54 Dual Digit Alphanumeric Displays. Technical Data Sheet. Model No: KWA-541XWB-Y .54" Dual Digit Alphanumeric Displays Technical Data Sheet Model No: KWA-54XWB-Y Spec No.: C5243A/B Rev No.: V.2 Date:Apr//26 Page: O 6 eatures:.54 (inch) digit height. Excellent segment uniformity. Sold

More information

LABORATORY MODULE. Analog Electronics. Semester 2 (2005/2006)

LABORATORY MODULE. Analog Electronics. Semester 2 (2005/2006) LABORATORY MODULE ENT 162 Analog Electronics Semester 2 (2005/2006) EXPERIMENT 1 : Introduction to Diode Name Matric No. : : PUSAT PENGAJIAN KEJURUTERAAN MEKATRONIK KOLEJ UNIVERSITI KEJURUTERAAN UTARA

More information

Bridgelux Gen 7 V8 Array. Product Data Sheet DS104

Bridgelux Gen 7 V8 Array. Product Data Sheet DS104 Bridgelux Gen 7 V8 Array Product Data Sheet DS104 1 Introduction V Series The V Series LED array products deliver high quality light in a compact and cost-effective solid state lighting package. These

More information

Analog Timer TTL Series

Analog Timer TTL Series Analog r TTL Series Part Number Description TTL - ❶ ❷ ❸ ❶ Pin Type 8 : 8Pin Socket and Panel mounted ❷ Timing Mode A : A, A1, F1, I B : A, A1, B, F ❸ Supply Voltage 110/220VAC 24VDC 110VDC General Specification

More information

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED Features Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide

More information

Operating Temperature : -30 ~85 Lead free soldering compatible RoHS compliant

Operating Temperature : -30 ~85 Lead free soldering compatible RoHS compliant Features Package Product features Bi-Color Type(1.6 x 1.5mm), Milky White resin Outer Dimension 1.6 x 0.8 x 0.4mm ( L x W x H ) Temperature range Storage Temperature : -40 ~100 Operating Temperature :

More information

Single-phase Voltage Relay

Single-phase Voltage Relay New Product Single-phase Voltage Relay K8AB-VS Ideal for voltage monitoring for industrial facilities and equipment. Monitor for overvoltages or undervoltages. Manual resetting and automatically resetting

More information

High-Accuracy Luminance & Chromaticity Measurement Comparable to Many Spectroradiometers

High-Accuracy Luminance & Chromaticity Measurement Comparable to Many Spectroradiometers New Auto Mode increases accuracy at low luminance levels CHROMA METER CS-200 Suitable for measurement of optical devices such as LCDs, PDPs, organic ELs, FEDs and LEDs. 1.0 0.5 380 400 500 600 700 (nm)

More information

Technical Description

Technical Description Z-65.40-191_englischeBeschr_Mai2016.doc Status: 10.05.2016 Page: 1/31 Technical Description Leak detector conductive electrode type ELH..., Conductive plate electrode type EP..., Measuring transducer types

More information

Operating Temperature : -40 ~85 Lead free soldering compatible RoHS compliant. :θx = 150 deg., θy =140 deg. :θx = 148 deg., θy =140 deg.

Operating Temperature : -40 ~85 Lead free soldering compatible RoHS compliant. :θx = 150 deg., θy =140 deg. :θx = 148 deg., θy =140 deg. Features Package Product features Bi-Color Type(3.0 x 2.0mm), Milky White resin Outer Dimension 3.0 x 2.0 x 1.0mm ( L x W x H ) Temperature range Storage Temperature : -40 ~100 Operating Temperature :

More information

Contrast scanners detect the little differences

Contrast scanners detect the little differences KT /KT Contrast scanners Contrast scanners Contrast scanners detect the little differences Adjustment of the standard version is carried out manually. The contrast scanner has an integrated adjustment

More information

SMD B /R6G6C-A01/3T

SMD B /R6G6C-A01/3T eatures Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself

More information

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC TM LTH3MM1V Series 3mm (T-1) Through Hole Built in Resistor for 1VDC LTH3MM1VFR4700 - Yellow Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 1 Volt MSL Applications Automotive

More information

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC

LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR4600 - Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 12 Volt Applications Automotive Indoor

More information

Leuze electronic. Throughbeam photoelectric sensor. Dimensioned drawing. Electrical connection. Accessories: ISO 9001 IP 67

Leuze electronic. Throughbeam photoelectric sensor. Dimensioned drawing. Electrical connection. Accessories: ISO 9001 IP 67 LS 303 Throughbeam photoelectric sensor Dimensioned drawing 1 khz 7m 10-30 V DC A 2 LS l A²LS - active suppression of extraneous light l Activation input for functional testing l Complementary outputs

More information

5mm (T1 ¾) Package Discrete LED RED

5mm (T1 ¾) Package Discrete LED RED 5mm (T1 ¾) Package Discrete RED 5HX-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and Standard (Blank) Lead Frame styles

More information

Cree PLCC6 3 in 1 SMD LED CLX6F-AKB

Cree PLCC6 3 in 1 SMD LED CLX6F-AKB Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1391.001 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high reliability and high brightness LEDs

More information

EC centrifugal fan. backward curved, single inlet

EC centrifugal fan. backward curved, single inlet RG56-AG7- ebm-papst Mulfingen GmbH & Co. KG Bachmühle 746 Mulfingen Phone: +49 798 - Fax: +49 798 - www.ebmpapst.com info@de.ebmpapst.com Nominal data Type Motor RG56-AG7- MG-FF Phase ~ Nominal voltage

More information

Ultrabright LED, Ø 5 mm Untinted Non-Diffused Package

Ultrabright LED, Ø 5 mm Untinted Non-Diffused Package TLCS5., TLCR5., TLCO5., TLCY5., TLCYG5., TLCPG5. Ultrabright LED, Ø 5 mm Untinted Non-Diffused Package DESCRIPTION The TLC.5.. series is a clear, non-diffused 5 mm LED for high end applications where supreme

More information

WP937GYW T-1(3mm) Bi-Color Indicator Lamp

WP937GYW T-1(3mm) Bi-Color Indicator Lamp T-1(3mm) Bi-Color Indicator Lamp DESCRIPTIONS The source color devices are made with Gallium Phosphide Light Emitting Diode The source color devices are made with Gallium Arsenide Phosphide on Gallium

More information

Light Emitting Diodes

Light Emitting Diodes Light Emitting Diodes Topics covered in this presentation: LED operation LED Characteristics Display devices Protection and limiting 1 of 9 Light Emitting Diode - LED A special type of diode is the Light

More information

Optical laser distance sensors. Dimensioned drawing

Optical laser distance sensors. Dimensioned drawing ODSLR 96B Optical laser distance sensors Dimensioned drawing en 05-2012/11 50110336 60 2000mm 18-30 V DC We reserve the right to make changes DS_ODSLR96BMCV62000_en_50110336.fm Reflection-independent distance

More information

PROXIMITY SENSOR TERMINOLOGY

PROXIMITY SENSOR TERMINOLOGY Never use this desk reference for installation or operation of equipment. Refer to manual for installation and operation instructions. The following descriptions refer to the European standard EN 60947-5-2.

More information

D20 duetto/mh D20 duetto/mh

D20 duetto/mh D20 duetto/mh D20 duetto/mh35-70 Duetto/MH35-70, is suitable for 35/70W metal halide lamps with a flux of 3300/7000 lumen, and for 100/150W halogen lamps with B15d socket. The dual light beam is effectively obtained

More information

2.5x0.7mm RIGHT ANGLE SMD CHIP LED LAMP. Features. Descriptions. Package Dimensions

2.5x0.7mm RIGHT ANGLE SMD CHIP LED LAMP. Features. Descriptions. Package Dimensions 2.5x0.7mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APFA2507LSURKSYKZGKC Features 2.5x1.0x0.7mm right angle SMD LED,

More information

DATA SHEET: AlInGaP : DRx-NJS

DATA SHEET: AlInGaP : DRx-NJS DATA SHEET: DomiLED TM DomiLED TM Synonymous with function and performance, the DomiLED TM series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability

More information

BTS256-PAR. Product tags: VIS, Spectral Data, PAR, Waterproof, General lighting. https://www.gigahertz-optik.de/en-us/product/bts256-par

BTS256-PAR. Product tags: VIS, Spectral Data, PAR, Waterproof, General lighting. https://www.gigahertz-optik.de/en-us/product/bts256-par BTS256-PAR https://www.gigahertz-optik.de/en-us/product/bts256-par Product tags: VIS, Spectral Data, PAR, Waterproof, General lighting Gigahertz-Optik GmbH 1/8 Description Measurement and examination of

More information

Low Current 0603 SMD LED

Low Current 0603 SMD LED TLMO, TLMS, TLMY Low Current 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to Smaller products of higher

More information

RU Series Universal Relays

RU Series Universal Relays Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal

More information

High Efficiency LED in Ø 3 mm Tinted Total Diffused Package

High Efficiency LED in Ø 3 mm Tinted Total Diffused Package TLHG46., TLHR46., TLHY46. High Efficiency LED in Ø 3 mm Tinted Total Diffused Package DESCRIPTION 922 The TLH.46.. series was developed for applications which need a very wide radiation angle like backlighting,

More information

SUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS

SUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS PACKAGE DIMENSIONS FEATURES Subminiature T-3/4 transfer molded.276 (7.0) MIN Low package profile Axial leads Wide viewing angle SMT versions.002 (.06).031 (.78).023 (.58).075 (1.9) DIA.056 (1.44).048 (1.24)

More information

Bridgelux Vesta Series Dim-To-Warm 9mm Array. Product Data Sheet DS150

Bridgelux Vesta Series Dim-To-Warm 9mm Array. Product Data Sheet DS150 Bridgelux Vesta Series Dim-To-Warm 9mm Array Product Data Sheet DS150 Introduction Vesta Series Vesta Series Dim-To-Warm Array products deliver adaptable light in a cost-effective, solid state lighting

More information

SURFACE MOUNT LED BLUE, 1206 IL PACKAGE

SURFACE MOUNT LED BLUE, 1206 IL PACKAGE SURFACE MOUNT LED BLUE, 1206 IL PACKAGE SM1206NBWC-IL Industry Standard 1206 Package RoHS Compliant Water Clear Inner Lens High Luminous Intensity Narrow Viewing Angle Ideal for Status Indication, Display,

More information

Digital Input Output Module 24 V for Ex n Zone 2 Series 9472/35

Digital Input Output Module 24 V for Ex n Zone 2 Series 9472/35 www.stahl.de > 16 channels can be adjusted in pairs as digital inputs or outputs > Suitable for NAMUR proximity switches, 3-wire PNP proximity switches, contacts and solenoid valves (24 V / 0.5 A). > Up

More information

Round Through-Hole LED Lamp (3 mm)

Round Through-Hole LED Lamp (3 mm) Round Through-Hole LED Lamp (3 mm) High brightness with well-defined spatial radiation patterns UV-resistant epoxy lens Lead-frame material is iron alloy with tin plated leads No stand-offs Each OVLBx4C7

More information

OFF-delay time. 7.5 s. 15 s. 30 s. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category

OFF-delay time. 7.5 s. 15 s. 30 s. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category Safety Relay Unit Four kinds of -mm wide Units are available: A -safety contact model, a -safety contact model, and models with safety contacts and OFF-delay safety contacts. Also available are 7.-mm wide

More information

Low Current LED in Ø 3 mm Tinted Diffused Package

Low Current LED in Ø 3 mm Tinted Diffused Package TLLG44., TLLR44., TLLY44. Low Current LED in Ø 3 mm Tinted Diffused Package 922 PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 3 mm Product series: low current Angle of half intensity: ± 25

More information

DEIF A/S. Insulation monitor. Type SIM-Q

DEIF A/S. Insulation monitor. Type SIM-Q Insulation monitor 4921232C Monitoring of insulation resistance on ungrounded AC networks (IT network) Working voltage up to 69V AC, withstands up to V DC Measuring range 1...Mohm or 1...Mohm Alarm on

More information

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD. Features Side view LED. Lead frame package with individual 2 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions

More information

Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015.

Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015. DATA SHEET: Right Angle DomiLED TM High Brightness AlInGaP : DSx-PSS Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015. DomiLED TM Synonymous with function

More information

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 0805 Package Chip LED EVERLIGHT ELECTRONICS CO.,LTD. Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor

More information

PHASED OUT. LED Driver Linear / area dimming. Driver LCAI 20W 150mA 400mA ECO lp ECO series

PHASED OUT. LED Driver Linear / area dimming. Driver LCAI 20W 150mA 400mA ECO lp ECO series EL Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 150 400 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee

More information

SPEC NO: DSAA3955 REV NO: V.12A DATE: AUG/11/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:

SPEC NO: DSAA3955 REV NO: V.12A DATE: AUG/11/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: 7.6mmX7.6mm SUPER FLUX LED LAMP Part Number: L-7676CSURC-E Hyper Red Features Super flux output. Design for high current operation. Outstanding material efficiency. Reliable and rugged. RoHS compliant.

More information

Positive-guided relay outputs: 8 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

Positive-guided relay outputs: 8 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous Contact expander module for increasing the number of available contacts Approvals Unit features Positive-guided relay outputs: 8 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous

More information

SURFACE MOUNT LED GREEN, 0603 PACKAGE, 2mA

SURFACE MOUNT LED GREEN, 0603 PACKAGE, 2mA SURFACE MOUNT LED GREEN, 0603 PACKAGE, 2mA SM0603GCL Industry Standard 0603 Package RoHS Compliant Small Package and Footprint Low Current, 2mA Water Clear Lens Wide Viewing Angle Ideal for Status Indication,

More information

3.4. Control Relays and Timers. Contents Description D5RR/D5RF Series... D7PR/D7PF Series. General Purpose Plug-In Relays

3.4. Control Relays and Timers. Contents Description D5RR/D5RF Series... D7PR/D7PF Series. General Purpose Plug-In Relays .4 D7 Series Relay Contents Description D1RR/D1RF Series......................... D2RR/D2RF Series......................... DRR/DRF Series......................... D4 Series................................

More information

1-Phase True RMS AC/DC Over and Under Current Types DIC01, PIC01

1-Phase True RMS AC/DC Over and Under Current Types DIC01, PIC01 Monitoring Relays -Phase True RMS AC/DC Over and Under Current Types DIC0, PIC0 DIC0 PIC0 TRMS AC/DC over + under, over+over, under+under current and voltage monitoring relays DC process signal plus/minus

More information

Model Number Structure

Model Number Structure General-purpose Relay G2RS-(S) Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped

More information

High Efficiency Blue LED, Ø 5 mm Untinted Non-Diffused Package

High Efficiency Blue LED, Ø 5 mm Untinted Non-Diffused Package TLHB51, TLHB512 High Efficiency Blue LED, Ø 5 mm Untinted Non-Diffused Package DESCRIPTION 19223 This device has been designed in GaN on SiC technology to meet the increasing demand for high efficiency

More information

3mm 5mm (T1) ¾) Package Discrete LED AMBER, YELLOW, Super Bright B

3mm 5mm (T1) ¾) Package Discrete LED AMBER, YELLOW, Super Bright B 3mm 5mm (T1) ¾) Package Discrete AMBER, YELLOW, Super Bright B 5SYX-X Industry Standard 5mm (T1 ¾) Package RoHS Compliant Water Clear (C), Diffused (D), and Tinted (T) Lenses Available in Flange (F) and

More information