CLIFF. Optical Jacks.

Transcription

1 CLIFF Optical Jacks The CLIFF range of Optical Transmitter and Receiver jacks feature seven different models that conform to the EIAJ standard CP1201 for igital Audio Interfaces including FibreOptical interconnections. Optical Jacks are virtually unaffected by noise when transmitting and receiving signals between digital audio equipment, enabling highquality audio recording and high speed signal receiving. It continues to be adopted as a virtual standard in portable audio equipment. Several models have a selftapping hole for panel mounting and three models replace the plugin cover with a convenient hinged shutter to protect against contamination. OTJ1/ORJ1 Single Optical Transmitter and Receiver Jack. Right angle PCB mount with self tapping hole for panel mounting. Removable plugin cover. OTJ1 (FC T) ORJ1 (FC R) OTJ2/ORJ2 Single Optical Transmitter and Receiver Jack. Right angle PCB mount with self tapping hole for panel mounting. Removable plugin cover. OTJ2 (FC684202T) ORJ2 (FC684202R) OTJ3/ORJ3 Single Optical Transmitter and Receiver Jack. Right angle PCB mount. Removable plugin cover. OTJ3 (FC T) ORJ3 (FC R) OTJ4/ORJ4 Single Optical Transmitter and Receiver Jack. Low profile right angle PCB mount. OTJ4 (FC684204T) ORJ4 (FC684204R) Cliff Electronic Components, Ltd. 76 Holmethorpe Avenue, Holmethorpe Ind. Est. Redhill, Surrey RH1 2PF. England Tel: +44 (0) Fax: +44 (0) sales@cliffuk.co.uk isit us online at:

2 CLIFF Optical Jacks OTJ5/ORJ5 Single Optical Transmitter and Receiver Jack. Right angle PCB mount with self tapping hole for panel mounting. Hinged shutter. OTJ5 (FC684205T) ORJ5 (FC684205R) OTJ6/ORJ6 ual SPIF RCA and Optical Transmitter and Receiver Jack. Right angle PCB mount with self tapping hole for panel mounting. Hinged shutter. Several different colored inserts available. OTJ6 (FC684206T) ORJ6 (FC684206R) OTJ8/ORJ8 Optical Transmitter and Receiver Jack. Right angle PCB mount. Hinged shutter. OTJ8 (FC684208T) ORJ8 (FC684208R) Electrical Specifications: Mechanical Specifications: Materials: Supply oltage: 0.5 to 7.0 Maximum. Input oltage: 0.5 to +0.5 Maximum. Operating Temperature: 20 deg. C to +70 deg. C Maximum. Storage Temperature: 30 deg. C to +80 deg. C Maximum. Soldering Temperature: 260 deg. C Maximum. Insertion Force: 5.9N Minimum, 39.2N Maximum. Withdrawal Force: 5.9N Minimum, 39.2N Maximum. Body: PBT +30G, ABS 940 (depends on model) Shutter: Nylon PA66 Please refer to the individual technical data sheets available for each model for the recommended operating conditions, characteristics, PC layouts and technical information. We also manufacture molded optical lead assemblies for use with our optical jacks. Please contact our sales office for more details CLIFF rawings available on request. Contact sales@cliffuk.co.uk c

3 C

4 CUSTOMER MOEL NO. / TITLE OPTICAL TRANSMITTER JACK SPECIFICATION SPECIFICATION NO. PAGE: 1 OF 5 FC684208T ATE: OCT,16,2006 OPTICAL CONNECTOR 1. Features (1) Unidirectional data transmission using plastic fiber. (2) Signal transmission speed: MAX. 12.5Mbps (3) Low voltage drive Operating voltage: 2.75 to 5.25 (4) Minimum input optical power: MIN. 21dBm (EIAJ) (5) TTL and high speed CMOS LOGIC IC compatible. Internal equivalent circuit LE rive IC in cc GN 2. Applications (1) C players (2) M players (3) players 3. Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Supply voltage cc Input voltage in Operating temperature Topr Storage temperature Tstg Soldering temperature Tsol Rating 0.5 to to cc to to +80 Solder Pool Soldering Iron Unit 260 ±3 5s +1s 0s 380 ±10 3s +1s 0s RE. NAME ATE REMARK A P CLIFF ELECTRONIC COMPONENTS LT C H K C H K W R T N

5 SPECIFICATION CUSTOMER MOEL NO. / TITLE SPECIFICATION NO. PAGE: 2 OF 5 OPTICAL TRANSMITTER JACK FC684208T ATE: OCT,16, Recommended Operating Conditions Parameter Symbol MIN. TYP. MAX. Unit Operating supply voltage cc Operating transfer rate T 12.5 Mbps 5. Electrooptical Characteristics Parameter Symbol Conditions MIN. TYP. MAX. Unit. Peak emission wavelength λp nm Optical power output coupling with fiber issipation current High level input voltage Low level input voltage Low High delay time High Low delay time Pc Icc ih il tplh tphl Refer to Fig dbm Refer to Fig ma Refer to Fig Refer to Fig.2 Refer to Fig.3 Refer to Fig ns ns Pulse width distortion tw Refer to Fig ns Jitter tj Refer to Fig ns 6. Mechanical Characteristics 61. Parameter Insertion force. Withdrawal force. Symbol MIN. TYP. MAX. Unit 3 40 N 6 40 N 62. Repeated operation Inserting and withdrawing shall be made at a speed of 20 times or less/min using mating plug 500 times. 63. Strength of tapping part The tapping part shall be capable of a torque of 8kgfcm for 5 seconds by TP3 8 tapping tight screw and panel (t=0.8), the jack shall not be broken. CLIFF ELECTRONIC COMPONENTS LT

6 SPECIFICATION CUSTOMER MOEL NO. / TITLE SPECIFICATION NO. PAGE: 3 OF 5 OPTICAL TRANSMITTER JACK FC684208T ATE: OCT,16,2006 Fig.1 Measuring Method of Optical Output Coupling with Fiber. Notes: (1) OC08 cc=3.0 (State of operating). (2) To bundle up the standard fiber optic cable, make it into a loop with the diameter =10cm or more. (The standard fiber optic cable will be specified elsewhere.) Fig.2 Measuring Method of Input oltage and Supply Current. Input conditions and judgement method. Condition Judgment method in=2.1 or more. 21 Pc 15dBm, Icc=13mA or less. in=0.8 or less. Pc 36dBm, Icc=13mA or less. Note) cc=3.0 (State of operating). CLIFF ELECTRONIC COMPONENTS LT

7 SPECIFICATION CUSTOMER MOEL NO. / TITLE SPECIFICATION NO. PAGE: 4 OF 5 OPTICAL TRANSMITTER JACK FC684208T ATE: OCT,16,2006 Fig.3 Measuring Method of Pulse Response and Jitter. Standard optical fiber cable Unit to be measured Standard receiver Output signal Oscilloscope Input 6.25Mbps biphase PRBS signal (GP1F38T2) Input signal Standard receiver output Test item Test item Symbol Test condition Low High pulse delay time tplh Refer o the above prescriptions High Low pulse delay time tphl Refer to the above prescriptions Pulse width distortion tw tw=tphltplh Low High Jitter High Low Jitter tjr tjf Set the trigger on the rise of input signal to measure the jitter of the rise of output Set the trigger on the fall of input signal to measure the jitter of the rise of output Notes (1) The waveform write time shall be 4 seconds. But do not allow the waveform to be distorted by increasing the brightness too much. (2) cc=3.0 (State of operating) (3) The probe for the oscilloscope must be more than 1MΩ and less than 10pF. CLIFF ELECTRONIC COMPONENTS LT

8 SPECIFICATION CUSTOMER MOEL NO. / TITLE SPECIFICATION NO. PAGE: 5 OF 5 OPTICAL TRANSMITTER JACK OC08T10E ATE: OCT,16,2006 Mating plug CLIFF ELECTRONIC COMPONENTS LT

9 ocument No. 01E ocument name Management standards for Environmentrelated substances to be controlled Rev. ATE 1.6 OCT,26, This part should not contain any substances which are specified in follow.(except cadmium is less than 5ppm, Lead is under 90ppm) 2. In this case, preprocessing methods and measurement methods shall conform to ROHS. 3. List of Environmentrelated Substances to be Controlled ( The Controlled Substances ) Heavy metals Chlorinated organic compounds Brominated organic compounds Substances Cadmium and cadmium compounds Mercury and mercury compounds Hexavalent chromium compounds Polychlorinated biphenyls (PCB) Mirex (Perchlordecone) Other chlorinated organic compounds Polybrominated biphenyls (PBB) Other brominated organic compounds Organic tin compounds (tributy tin compounds, Triphenyl tin compounds) Asbestos Azo compounds Formaldehyde Lead and lead compounds Lead in the plastic,rubber,paints,ink Polychlorinated naphthalenes (PCN) Chlorinated paraffins (CP) Polyvinyl chloride (PC) and PC blends Polybrominated diphenylethers (PBE) Allowable concentration Less 5ppm Less 90ppm Less 50ppm TetrabromobisphenolAbis (2, 3dibromopropylether) (TBBPAbis) 4. Allowable concentrations: Less than 90ppm is determined as an allowable totalconcentration of four heavy metals (mercury, cadmium, hexavalent chromium, and lead). Less than 5ppm is determined as an allowable cadmiumconcentration in a plastic (including rubber) part. A P RE. NAME ATE REMARK CLIFF ELECTRONIC COMPONENTS LT C H K C H K W R T N

10 QMFZ2 Component Plastics Thursday, January 16, 2003 E41938 E I UPONT E NEMOURS & CO INC ENGINEERING POLYMERS CHESTNUT RUN PLAZA PO BOX WILMINGTON E Material esignation: 70G33L(+) Product escription: Polyamide 66 (PA66), glass reinforced, designated "Zytel" furnished as pellets. Color Min. Thick. (mm) Flame Class HWI HAI RTI Elec RTI Imp RTI Str IEC GWIT IEC GWFI ALL 0.71 HB HB HB CTI: 0 HTR: 1 495: 5 IEC BP: (+) irgin and Regrind up to 50% by weight inclusive, have the same basic material characteristics. NOTE (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" or "MIN". Report ate: 08/06/1996 Underwriters Laboratories Inc UL94 smallscale test data does not pertain to building materials, furnishings and related contents. UL 94 smallscale test data is intended solely for determining the flammability of plastic materials used in components and parts of endproduct devices and appliances, where the acceptability of the combination is determined by ULI.