Enquiry Sent to 6 no of suppliers

Transcription

1

2

3 PURCHASE ENQUIRY OFFICE OF THE EXECUTIVE ENGINEER(M)-7/S&P YERMARUS THERMAL POWER STATION, RPCL YERMARUS, PIN Phone Fax Mail TO, Enquiry Sent to 6 no of suppliers Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table belo Sl No 1 Item Code Item Name/Specification 1 KV MEGGER SPECIFICATION:- NAME :- MANUAL INSULATION RESISTANCE TESTER. TYPE :- ANALOG AND HAND CRANKED. TEST VOLTAGE SELECTION :- 500V & 1000V (SELECTOR SWITCH). RANGE : MEGA OHMS. ACCURACY:- HIGH ACCURACY. MAKE :- MEGGER/MOTWANE/HT-ITALIA/FLUKE. OTHER REQUIREMENTS:- 1. THE PRODUCT SHOULD BE RUGGED, COMPACT,PORTABLE, HIGH QUALITY, ADVANCED, USER FRIENDLY & COMPLY TO RELEVANT IS/IES STANDARDS.. ALL STANDARD ACCESSORIES TO BE PROVIDED BUT WITH TEST LEADS OF 5 METER & METER LENGTH SETS, SEPERATELY. 3. AFTER SALES AND SERVICES SHOULD BE GOOD. Unit Required Quantity FLUKE DIG TRU M/METER & EQ MULTIMETER MODEL : FLUKE 189. and eqv. True-rms Digital Multimeter. 10 NOMINAL SPECIFICATIONS : DC Voltage : 0 to 1000V. DC Current : 0 to 10A (0A for 30 seconds). AC Voltage, True-rms :.5 mv to 1000V khz bandwidth. AC Current, True-rms : 5 microa to 10A (0A for 30 seconds). Resistance : 0 to 500 Mohms. Conductance : 0 to 500 Nanosiemens. Capacitance : nf to 50 mf. Diode Test : 3.1V. Temperature : -00 C to 1350 C (-38 degf to 46 degf). Frequency : 0.5 Hz to 1000 khz. Accuracy (Basic DC V) : 0.05 percentage. (Basic AC V) : 0.4 percentage. FEATURES : Dual Displays : count primary display. : 5000 count secondary display. Backlight with brightness selections : Bright white backlight for clear readings in 03-MAY-16 11:37:1

4 Sl No Item Code Item Name/Specification poorly lighted areas. Fast Autorange : Meter automatically selects best range - instantly. AC+DC True RMS, ac rms specified to 100 khz : Choices for AC only, AC and DC dual display, or AC+DC readings. dbm, dbv : User selectable impedance references for dbm. AutoHOLD : Holds readings on display. Continuity/Open Test : Beeper sounds for Ohms readings below threshold or for momentary open circuit indication. Battery/Fuse Access Door : Battery or fuse replacement without voiding calibration Hi-Impact Overmold Case : Integrated Protective Holster provides superior impact protection for meter. Accuracy : Dual Display AC or AC and DC. Unit Required Quantity DC mv : mv 0.001mV. : mv 0.01 mv. : mv 0.1 mv. DC V : V V. : V 0.001V. : V 0.01V. : V 0.1V. DC micro Amps : microa 0.01 microa. : microa 0.1 microa. DC ma : ma ma. : ma 0.01 ma. DC A : A A. : A A. AC mv : 50000mV 0.001mV. : mv 0.01 mv. : mv 0.1 mv. AC V : V V. : V 0.001V. : V 0.01V. : V 0.1V. dbv : -56 to db. : -6 to db HAND HELD DIGITAL V / MA CALIB 6 HAND HELD DIGITAL V / ma CALIBRATOR 1. Type: Hand held V / ma digital calibrator. Range: a) current 0-60 ma b)voltage 0-30vdc 3. Display: LCD display with two decimal with back light facility 4. Display size: 1" or STD. 5. Supply: rechargeable cell 6. Operating Keys (membrane type): 1.increase/decrease. ON/OFF key % (inc/dec in steps of 10%) % (inc/dec in steps of 5%) 03-MAY-16 11:37:1

5 Sl No Item Code Item Name/Specification 7. Connection: Standard 8. Terminal connection with probes: pin type with one end and crocodile type at the other end (Black and Red) 9. Application area: field and lab 10. Facility: calibrator shall read and generate v/ma 11. AC Adapter: yes 1. Carryingcase: yes 13. Optional items: yes HAND HELD DIGITAL ma CALIBRATOR Unit Required Quantity PORTABLE TEMP CALIBRATOR PORTABLE TEMPERATURE CALIBRATOR: DRY BLOCK TYPE WITH INSERT RANGE: AMBIENT TO 650 DEG C. Accuracy: Better than +/- 1 Degc(For holes 6.7 mm or less) DISPLAY: C/F SELECTABLE MEASURED AND SET VALUE DISPLAY - DIGITAL RESOLUTION: 0.1 C TEMPERATURE CONTROLLER TYPE: AUTO-TUNE PID HEATING TIME: 15 MIN TO ATTAIN MAX TEMP COOLING TEMP: 30 MIN FROM 350C to 100 C POWER SUPPLY: 0 V AC +/- 10%, 50 HZ CALIBRATION CERTIFICATE: TRACEABLE TO NATIONAL STANDARDS DEPTH OF INSERT: 10 MM INSERT MATERIAL: SPECIAL ALLOY SIZE OF HOLES: 1x3.5 mm, 1x8.5mm, 1x6.3mm, 1x1.5mm, 13.5mm, mm holes and other standard sizes accommodated in three inserts (one plus two additional inserts) DELIVERY INCLUDES 1) TEMPERATURE CALIBRATOR ) MAINS CABLE 3) INSTRUCTION MANUAL 4) MULTIHOLE INSERTS -- 3 Nos. 5) CALIBRATION CERTIFICATE GUAGE COMPARATOR MAKE: BUDENBERG MODEL: BUDENBERG PRESSURE CALIBRATOR 106 SERIERS. PRESSURE RANGE: UPTO 600 bar. BUDENBERG MAKE STANDARD TEST GAUGES MODEL:514 FGP ACCURACY +_0.5%fsd. DIAL SIZE:150mm. STANDARD GAUGE RANGES: 1> 0 TO 1 BAR. > 0 TO BAR. 3> 0 TO 16 BAR. 4> 0 TO 40 BAR. 5> 0 TO 100 BAR. 6> 0 TO 50 BAR. 7> 0 TO 400 BAR. 8> 0 TO 600 BAR. Important Dates: 03-MAY-16 11:37:1

6 03-MAY-16 11:37:1 KARNATAKA POWER CORPORATION LIMITED 1. Last date for receipt of 4/05/016 16:00 quotations/tenders/offers : 6/05/016 16:30 Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date. b) Date of opening. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers. 3. Offers without valid TIN will not be considered for evaluation VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt of tender/quotation. PRICES : The price shall be quoted per Unit exclusive of Taxes and duties. The following components of the rates shall also be mentioned. a) F.O.R, b) Discount if any, c) Excise duty, e) CST / VAT, f) Freight, g) Any other charges. Applicable "C" Form will be issued by KPCL. TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt and acceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier, corporation reserves the right of loading the additional cost to arrive at the landed cost which may please be noted. QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the final requirements and Purchase order condition. GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 1 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturing defects/bad workmanship. During this period any defects noticed shall be replaced free of cost at site without waiting for settlement of claims. PENALTY : For delay in delivery of material beyond the stipulated delivery period, 0.5 % per week subject to a maximum of 5% of value of the delayed quantity shall be applicable. QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and action will be taken as per conditions of purchase order. Materials should be made of best quality in accordance with the specification duly indicating IS Code, Make, Brand etc. DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed wherever applicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer. TRANSPORT : Material Shall be transported only through reputed transporters who have godown at Raichur/Shaktinagar Like Associated Road Carriers, TCI, SER, VRL etc. EARNEST MONEY DEPOSIT : If the quoted value is more than Rs (Fifty Thousand Only) then 3000 of the quoted value shall be furnished in the form of DD/BG drawn in favour of Assistant General Manager (Finance)- Thermal, RTPS, Karnataka Power Corporation Limited, Shaktinagar , from any nationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperat sealed cover. Exemption Certificate for EMD/SD issued by NSIC or By any State Govt or Central Govt will not be considered and such offers are liable for rejection. AGREEMENT : An agreement shall be executed by the supplier ( as per KPCL format) immediately after receipt and acceptance of Purchase Order on e-stamped duty paper Worth of Rs (Purchased in Karnataka Only) before effecting supply. However in case any supplies are made the payment will be released only after entering into agreement. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance / placing of purchase order. SECURITY DEPOSIT : If the landing cost of the Purchase order exceeds Rs (Fifty Thousand), then 10 % of the landing cost shall be furnished as SD in the form of DD or BG issued from any Nationalised/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effecting the supply.

7 Yours Faithfully For KARNATAKA POWER CORPORATION LIMITED EXECUTIVE ENGINEER(M)-7/S&P 03-MAY-16 11:37:1