OPUS C DC Power Systems OC2066 and OC1666 floor standing Cabinets
|
|
|
- Rosamond Cannon
- 5 years ago
- Views:
Transcription
1 OPUS C OPUS C DC Power Systems OC2066 and OC1666 floor standing Cabinets 6.6 OPUS C 220- OPUS C 220- Product Description Features OPUS C DC power systems are robust, free convection cooled, N+1 redundant backup power solutions for critical infrastructure applications such as transmission and distribution substations, process industries and special communications. OPUS C DC power systems consist of MRC-rectifiers, VIDI+ controllers, Connections for mains and battery and wide variety of load distribution.. Natural Convection cooling Models for 24, 48, 60, 110, 125, 220 VDC Max kw output power IP20/IP21 600x600mm cabinets, height 2m or 1.6m, Option: OC0864 Wall Cabinet H800 x W600 x D400 mm N+1 redundancy Plus or Minus Grounded or Floating Battery connection: 1 string with full current: MCB or MCCB Load Distribution Modules as options: 2-pole or 1-pole MCB, NH000/NH00/NH01, Diazed, Switch fuse, MCCB Options: Battery LVD, Load LVD, extra battery connections, Temperature sensors, Battery block voltage monitoring, IP21, bottom entry cabling, Efore reserves rights for changes. 1/5 File: DOC D.02
2 Technical Specifications General construction Cooling Protection Controller user interface Cabling Colour Dimensions Natural convection IP 20 Option IP21 Display and local control in front door From top, Option bottom entry Cabinet RAL 7037 Door RAL 7024 Height 2000 or 1600 mm Width 600 mm Depth 600 mm Environment and standards Operating temperature -20 C +45 C Humidity max 95% relative humidity, non-condensing Altitude max 2000 m above sea level Safety IEC/EN EMC Emissions: IEC/EN Immunity: IEC/EN Harmonic currents IEC/EN Voltage fluctuation & flicker: IEC/EN Input,,,, OPUS C 220- AC-connection 3W + N + PE Nominal voltage 230 / 400 VAC Range, full VAC Range, reduced VAC Frequency 45 to 65 Hz Internal protection 16 A MCB / rectifier module Mains terminal Terminal blocks 10 mm2 6.6 OPUS C 220- Nominal current 10.2 A 15.4 A Maximum current 13.8 A 19.4 A Inrush current per rectifier 14.7 A 18 A Main switch 63 A Recommended mains fuse 3 x 25 A OPUS C 220- Nominal current 2 x 10.2 A 2 x 15.4 A Maximum current 2 x 13.8 A 2 x 19.4 A Inrush current per rectifier A Main switch 2 x 63 A Recommended mains fuse 2 x ( 3 x 25 A) Output 6.6 OPUS C 220- Grounding +, - or floating + or floating + or floating floating floating Nominal voltage 24 VDC 48 VDC 60 VDC 110 VDC 220 VDC Voltage range VDC VDC VDC VDC VDC Ripple noise < 100 mvp-p < 100 mvp-p < 100 mvp-p < 100 mvp-p < 100 mvp-p Rectifiers Max 6 Max 6 Max 6 Max 6 Max 6 Maximum current 24V 48V 60V 110V 220V Power max. 6.6 kw kw kw kw kw Redundant power 5.5 kw 8.0 kw 8.0 kw 8.0 kw 8.0 kw Output terminals Loads connected to distribution fuses, Efore reserves rights for changes. 2/5 File: DOC D.02
3 Output OPUS C 220- Grounding +, -, floating +, floating +, floating floating floating Nominal voltage 24 VDC 48 VDC 60 VDC 110 VDC 220 VDC Voltage range VDC VDC VDC VDC VDC Ripple noise < 100 mvp-p < 100 mvp-p < 100 mvp-p < 100 mvp-p < 100 mvp-p Rectifiers Max 12 Max 12 Max 12 Max 12 Max 12 Maximum current 24V 48V 60V 110V V Power max. kw kw kw kw kw Redundant power 12.1 kw 17.6 kw 17.6 kw 17.6 kw 17.6 kw Output terminals Loads connected to distribution fuses Battery connection OPUS C F P P F F Battery breaker in system 250A 2-p 3 x MCB 200A 1-p 3 x MCB 200A 1-p 100A 2-p 63A 2-p Optional breakers Max 4 MCCB Battery shelves or 3 3 F P P F OPUS C 220- F Battery breaker in system 500A 2-p 400A 1-p 400A 1-p 250A 2-p 100A 2-p Optional breakers Max 4 MCCB Battery shelves Optional Load Distribution Panels, configurable MCB panels NH00/NH01 fuse panels Diazed fuse panels Cylinder fuse panels Switch fuse panels Load Distribution Options 6.6 OPUS C pole MCB, 2 63A Max 48 Max 60 Max 60 Max 24 Max 24 Max 24 Max 30 Max 25 + AUX or alarm Max 20 Max 20 Max 20 Max 24 Max 25 1-pole NH000/00 2-pole NH000/00 1-pole NH01 2-pole NH01 2-pole Diazed 2-pole cylinder fuses E92/32PV 2-pole switch fuses incl. 2-pole NH00 fuse, Efore reserves rights for changes. 3/5 File: DOC D.02
4 Load Distribution Options 1-pole MCB, 2 63A + AUX or alarm 1-pole NH000/00 2-pole NH000/00 1-pole NH01 2-pole NH01 2-pole Diazed OPUS C 220- Other options IP21 drip water cover Cable duct for bottom entry cables, assembled side of cabinet NTC Temperature sensor Load LVD contactors, Battery LVD contactors Controllers: VIDI+ or VIDI+ I/O. Auxiliary controllers: VIDI-BM battery monitoring, VIDI-LVD Low Voltage Disconnector driver Typical block Diagram, Efore reserves rights for changes. 4/5 File: DOC D.02
5 Layout examples, OPUS cabinet systems Wall cabinet 6.6 OC0864 IP x 600 x 400 mm Bulk output Switch fuse battery fuses CS2066 F IP x 600 x 600 mm Diazed load distribution Switch fuse / NH00 battery fuses CS2066 P IP x 600 x 600 mm Fuse link NH00/01 load distribution MCCB battery fuses CS1666 F IP x 600 x 600 mm MCB battery fuses Order Information Name Order number Description 6.6 CS2066 F 9220X VDC, 6.6 kw, Floating CS2066 F 9220X VDC, kw, Floating CS2066 P 9220X VDC, kw, Positive Grounded OPUS C 48 9,6 CS1666 F 9220X V DC, kw, Floating CS2066 F 9220X V DC, kw, Floating CS2066 P 9220X VDC, kw, Positive Grounded CS2066 P 9220X VDC, kw, Positive Grounded CS2066 P 9220X VDC, kw, Positive Grounded CS2066 P 9220X VDC, kw, Positive Grounded CS2066 F 9220X V DC, kw, Floating CS2066 F 9220X VDC, kw, Floating OPUS C 220- CS2066 F 9220X V DC, kw, Floating OPUS C 220- CS2066 F 9220X VDC, kw, Floating *) other configurations on request, Efore reserves rights for changes. 5/5 File: DOC D.02
Dale Power Solutions Ltd
DC SWITCH TRIPPER CHARGER DATASHEET Features Erskine STU 110W Range 24V, 30V, or 48VDC nominal Constant voltage current limited charger output Standard alarms LCD voltmeter LED indica ons Equipped with
Technical Data Sheet. Uninterruptible Power Supply On-line VH Series UPS. Critical Power UL / 208V
Technical Data Sheet Uninterruptible Power Supply On-line VH Series UPS 2000-3000 UL / 208V GE Consumer & Industrial SA General Electric Company CH 6595 Riazzino (Locarno) Switzerland T +41 (0)91 / 850
Technical Data Sheets
GE Consumer & Industrial Power Protection Technical Data Sheets Digital Energy Uninterruptible Power Supply SG Series 80 100 120 kva 400 Vac CE Series 0 Date of issue: 01.11.2007 SGSE_080_UPS_GE_01a SGSE_100-120_UPS_GE_01a
Gutor PxW AC UPS Designed for North American Market
Gutor PxW AC UPS Designed for North American Market PEW 5 200 kva single phase PDW 10 220 kva three phase Higher ratings upon request schneider-electric.com 2 schneider-electric.com schneider-electric.com
Series PCI + PIT PIT5738 U IN PIT5748 U IN PCI5748 PCI5738. Series PIT 19 - Cabinet G10
PCI + PIT PCI5728 U IN 20 32 PIT5738 U IN 40 64 PIT5748 U IN 50 80 PIT5658 U IN 80 160 PIT5678 3000VA 3000VA 3000VA 3000VA 3000VA Serie PCI5728 U IN 20 32 PCI5738 U IN 40 64 PCI5748 U IN 50 80 PCI5758
ADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W
ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000
Orbital GFI Inverter Series
Orbital GFI Inverter Series Datasheet Key Features One, split or three phases and up to 25 kva Superior efficiency of 95% CAN Bus control and DAQ Power quality and EMC compliance in accordance with European
Metal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
C B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
The MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
TECHNICAL DATA SHEET B9600FXS kva
GENERAL INFORMATION TECHNICAL DATA SHEET B9600FXS 400-500-600-800 kva UPS Type ON LINE - Double Conversion Nominal output power (Cos 0.9) kva 400 500 600 800 Nominal output power (Cos 1.0) kw 360 450 540
Electrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.
WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue
PRODUCTS FOR ELECTRICAL SUB-STATIONS UPS, DC-AC INVERTERS, BATTERY CHARGERS, DC-DC CONVERTERS, 1-PHASE TO 3-PHASE CONVERTERS
PRODUCTS FOR ELECTRICAL SUB-STATIONS UPS, DC-AC INVERTERS, BATTERY CHARGERS, DC-DC CONVERTERS, 1-PHASE TO 3-PHASE CONVERTERS GAMATRONIC ELECTRONIC INDUSTRIES LTD. 1. Introduction Founded in 1970, Gamatronic
StatiVolt. Inverter UPS Systems. Features. Contents
Redundant, clean, sine-wave AC power ensures a high availability of mission-critical safety devices, instrumentation, alarms, controls and computers. Robust, StatiVolt UPS Systems are designed and built
These true on-line inverters incorporate pulse width modulation (PWM) control combined with high frequency igbt power transistors.
Industrial Inverter The Gentec inverter systems, OND2 SERIES, provide safe, pure sine wave, reliable power to critical control equipment. These inverters are online type, usually the load is fed by the
Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
SM2000 TECHNICAL DESCRIPTION
SM2000 TECHNICAL DESCRIPTION 1 GENERAL DESCRIPTION The SM2000 module is a high frequency switch mode rectifier. It converts the single phase AC line voltage into an isolated DC voltage. It can be used
NetSure ITM. Contents 1. Site Planning Data 2. One Line Diagram 3. System Outline Drawings 4. Connection Details
A technical manual from the experts in Business-Critical Continuity NetSure ITM Site Planning Data and System Drawings 48V DC UPS Section 6037 (Issue 10, October 21, 2010) Contents 1. Site Planning Data
MODULAR DC POWER SUPPLIES & SYSTEMS. DC Power Systems DC/AC Inverters Static Switches DC/DC Converters. GAMATRONIC, A SolarEdge Division
MODULAR DC POWER SUPPLIES & SYSTEMS DC Power Systems DC/AC Inverters Static Switches DC/DC Converters GAMATRONIC, A SolarEdge Division 17 Hartom Street, Jerusalem 9777517, Israel 1-800-20-70-90 Tel: +972-2-5888277
ATS01N125FT soft starter for asynchronous motor - ATS01-25 A V KW
Characteristics soft starter for asynchronous motor - ATS01-25 A - 110..480V - 2.2..11 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
ATS01N112FT soft starter for asynchronous motor - ATS01-12 A V KW
Characteristics soft starter for asynchronous motor - ATS01-12 A - 110..480V - 1.5..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)
MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
ATS01N103FT soft starter for asynchronous motor - ATS01-3 A V KW
Characteristics soft starter for asynchronous motor - ATS01-3 A - 110..480V - 0.55..1.1 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
FXP1500/1800 Front-Ends & FXR-3-48G Power Shelves Data Sheet
& FXR-3-48G Power Shelves Data Sheet FXP500/800 front-ends have a backplane-mounted AC input. Applications Telecommunications Data communications Servers Distributed power Features RoHS compliant for all
3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)
FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W
G8000MM Series IGBT. 100 to 750 KVA UPS UNINTERRUPTIBLE POWER SYSTEMS. 94% Efficiency. Input PF >0.98 DESIGN
UNINTERRUPTIBLE POWER SYSTEMS PF >0.98 G8000MM Series 100 to 750 KVA UPS IGBT DESIGN 94% Efficiency Main Features State-of-the-Art Modular Design Provides Maximum Flexibility The Toshiba G8000MM Uninterruptible
Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
Power IT LV Active Filters PQFA - PQFL - PQFT
Power IT LV Active Filters PQFA - PQFL - PQFT The ABB comprehensive solution for active filtering of harmonics Pst Harmonics and Power Quality Harmonics caused by non-linear electrical loads such as variable
TOSHIBA International Corp
TOSHIBA International Corp GUIDE SPECIFICATIONS THREE PHASE UNINTERRUPTIBLE POWER SYSTEM TOSHIBA 4200FA 30 kva CT Internal Battery UPS GUIDE SPECIFICATIONS 1 (30 kva CT) 1.0 SCOPE 1.1 System This specification
5 x 3 x 0.75 Inches form factor. 275 Watts with Forced Air Cooling. Efficiencies up to 92% Standby Power < 0.5 W
The ABC275 Series of ultra low profile open frame power supplies feature a wide universal AC input range of 80 264 VAC, offering output power 275 W with 13 CFM forced air cooling, or up to 160 W with convection
Electrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
ATS01N222LU soft starter for asynchronous motor - ATS01-22 A V KW
Characteristics soft starter for asynchronous motor - ATS01-22 A - 200..240 V - 4..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
BAT-Series Grid Inverter. Battery Charger.
BAT-Series Grid Inverter. Battery Charger. With the BAT-series, WSTECH offers a wide range of power converters for small to large energy storage applications. The BAT-series inverters offer a power range
DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
150 Watt Industrial (WLT)
150 Watt Industrial (WLT) Features 4 x 2 x 1.3 inches form factor 150 W with forced-air cooling Class 1 & Class 2 options 12 V @ 0.5 A fan voltage auxiliary output High efficiency > 86% Low conducted and
TORKEL 900-series Battery Load Unit
TORKEL 900-series Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Easy
TORKEL 900-series Battery Load Unit
Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Quick report Easily
Series AMEPR60-AZ up to 5A AC-DC / DC-DC LED Driver / Converter
Click on Series name for product info on aimtec.com Series AMEPR60-AZ Models Single output FEATURES: AC-DC Constant Current or Constant Over Temperature Protection Voltage LED Driver Over Current Protection
TOTAL HARMONIC DISTORTION Total harmonic distortion will be lower than 20% when output loading is 75% or higher
SPECIFICATI MODEL OUTPUT INPUT PROTECTI FUNCTI ENVIRMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RANGE RATED POWER SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY
ATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Product datasheet Characteristics ATS01N206QN soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Complementary Assembly style Function available Supply voltage limits Main Range of
Series Rev 1.2 Dec. 2015
LCP General Series Features Universal Full Input Voltage Range: 90~264VAC Accurate Constant Current Output: ±5 High Efficiency : up to 90 Active Power Factor Correction Short Circuit Protection, Output
3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The MBC41 Series of ultra-low open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in
SPECIFICATION. Online UPS 3000VA
Page 1 / 7 DESCRIPTION Pure sine-wave output UPS on-line double conversion type. INPUT AC Mains voltage 230V ac 1 phase Mains voltage range 184...264V ac Mains frequency range 47...63Hz Power factor at
PDAM500 Series 500W Power Supply
UL / IEC / EN 60601 3.1 Edition & UL / IEC / EN 60950 AM2 Safety Approvals High power density: 500W in 3 x 5 footprint Open Frame or Enclosed Versions Available Remote ON/OFF Function Built-in 12V/0.3A
PRELIMINARY. S050W-054C1400-L03-UN-D2 50W Programmable Driver. Electrical Specifications. Protections. Environmental Specifications.
Rev 2-23-217 Electrical Specifications Maximum Power: 5W Typical Efficiency: 87% Input Voltage Range: 12-277 Vac ± 1% Frequency: Power Factor: Inrush Current: Input Current (Max): 5/6 Hz >.9 @ 8-1% load,
DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS STRATO EVO PRELIMINARY
CONSTANT CURRENT, 010V DIMMABLE RTLD0401400ASARF DESCRIPTION STRATO EVO 40W switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance
Product Catalog PRODUCT CATALOG. Power supply system & test equipment
Product Catalog PRODUCT CATALOG 2018 2018 Power supply system & test equipment. 138/79, Moo 2 Tambon Ban Klang, Amphoe Mueang Pathumthani, Pathumthani Province 12000, Thailand. Tel: +66 21475048-9 Fax:
SAMSUNG ELECTRO-MECHANICS CO., LTD
Model Name : Features : ㅡ UL8750 / UL1310 Class 2 and CE Class Ⅱ ㅡ Full-protection provided: OCP/OVP/OTP/SCP ㅡ Meets safety requirements for lighting ㅡ Constant Voltage Type ㅡ 5 years warranty ㅡ IP67 Grade
TRC ELECTRONICS, INC LED Driver Constant Current 25W MEAN WELL IDPC-25 Series
MEAN WELL IDPC5 Series A File Name:IDPC5SPEC 07046 MEAN WELL IDPC5 Series SPECIFICATION MODEL IDPC5 50 IDPC5 500 IDPC5 700 IDPC5 050 RATED CURRENT 50mA 500mA 700mA 050mA RATED POWER 4.5W 5W 5.W 5.W CONSTANT
Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
J Series. Rectifier Module. Overview. Features
J Series Rectifier Module Overview Eltek rectifier modules provide industry-leading power density and efficiency in 1 or 2 RU footprints. With a wide range of power ratings and form factors, there is an
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES Medium-voltage rack-mount power supplies Page 2 The MV2000 series high-performance, medium output
These power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
NPF-40 SERIES 40 Watt LED Power Supply Measures: 5.91 x 2.09 x 1.38
IP67 Ⅱ Ⅱ SPECIFICATION MODEL NPF-40-12 NPF-40-1 NPF-40-20 NPF-40-24 NPF-40-30 NPF-40-36 NPF-40-42 NPF-40-48 NPF-40-4 DC VOLTAGE CONSTANT CURRENT REGION RATED CURRENT RATED POWER 12V 7.2 ~ 12V 3.34A 1V
These medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
45W Constant Current Mode LED Driver. IDLC-45 series. File Name:IDLC-45-SPEC
5W Constant Current Mode LED Driver IDLC5 series A File Name:IDLC5SPEC 06 SPECIFICATION 5W Constant Current Mode LED Driver IDLC5 series MODEL OUTPUT INPUT RATED CURRENT RATED POWER CONSTANT CURRENT REGION
Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up
ELG-100 series. 100W Single Output Switching Power Supply IP67 IP65. File Name:ELG-100-SPEC
Ⅰ Ⅰ IP65 IP67 { SPECIFICATION MODEL ELG--24 ELG--36 ELG--42 ELG--48 ELG--54 DC VOLTAGE 24V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 12 ~ 24V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V RATED CURRENT 4.0A
W o r l d C l a s s P o w e r S o l u t i o n s Internal power supply UPS mains operation UPS battery operation Bypass operation Parallel operation Manual bypass Overload Inverter failure Mains failure
VOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy
SAM Listed Model: LD12W - LD200W Series Environmental Strip Lighting Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Output Power: 12-200W Max. Output Voltages: 12VDC or 24VDC Optional
3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The ABC41 Series of ultra low open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in a variety
CP-T range Product group picture
Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink AC Solid State Contactor, 1- and 2 poles Zero switching for heating and motor applications Instant-on switching Rated operational current
em4 local - Robust Specific characteristics Part number
em4 em4 local em4 local Very compact and easy to program nanoplc Save time in designing your application using the most intuitive graphical function block language of the market Measure accurately your
Uninterruptible Power Supply Systems. Product Catalogue
Uninterruptible Power Supply Systems Product Catalogue 00 Contents Introduction --------------------------------------------------------------------------------- 3 1 Industrial Rectifiers DC Power Supply
TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p
Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC
02/11/2015
Standstill monitoring KSW3-JS Part number 85102331 Function "Stillstand detection without sensors" Independent of rotation direction Security with redundancy and feedback circuit 3 forcibly guided "NO"
These medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices.
The MBC40 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 40 W of output power and a variety of single and multiple output voltages. The MBC
Features. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
VIM Series. 90 & 60 W, Efficient, CV Class 2 LED Drivers ORDERING INFORMATION
060W-12 100W-24 Nominal Input Voltage 90 &, Efficient, CV Class 2 Max. Output Power Nominal Output Voltage Max. Output Current 120 & 277 Vac 12, 24 Vdc 5, 3.75 A Efficiency up to 90% typical Max. Case
ATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Characteristics soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
CCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
RSD-30 series. 30W Reliable Railway DC-DC Converter. (reinforced isolation) File Name:RSD-30-SPEC
(reinforced isolation) SPECIFICATION MODEL OUTPUT INPUT PROTECTION RSD-30G-3.3 RSD-30G-5 RSD-30G-12 RSD-30G-24 RSD-30L-3.3 RSD-30L-5 RSD-30L-12 RSD-30L-24 DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
Features : 36V. Can be adjusted by internal potentiometer A type only 6 ~ 10A 4.0 ~ 6.7A 3 ~ 5A ±2.0% ±0.5%
Features : Universal AC input / Full range (up to 305VAC) Built-in active PFC function Protections: Short circuit / Over current / Over voltage / Over temperature OCP point adjustable through output cable
LPF-25 series. 25W Constant Voltage + Constant Current LED Driver IP67. File Name:LPF-25-SPEC
IP67 ~ SPECIFICATION MODEL OUTPUT INPUT PROTECTION OTHERS NOTE VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(Typ.) LEAKAGE CURRENT OVER VOLTAGE OVER TEMPERATURE
Output Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
VP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS. STRATO LED Driver CONSTANT CURRENT, 0-10V DIMMABLE STRATO 35W LED DRIVERS
CONSTANT CURRENT, 010V DIMMABLE DESCRIPTION STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products
LCM-40DA/AUX Series 40W Multiple-Stage Constant Current LED Power Supply
Features Constant Current mode output with multiple levels selectable by dip switch Plastic housing with class II design Built-in active PFC function Standby Power consumption
60W Reliable Railway DC-DC Converter. RSD-60 series. File Name:RSD-60-SPEC
SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max.) Note.2 60mVp-p 100mVp-p 50mVp-p 50mVp-p
CP-T range Benefits and advantages
Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers
NPF-60D SERIES 60 Watt LED Power Supply Measures: 5.91 x 2.09 x 1.38
IP67 Ⅱ Ⅱ SPECIFICATION MODEL NPF-60D-12 NPF-60D-1 NPF-60D-20 NPF-60D-24 NPF-60D-30 NPF-60D-36 NPF-60D-42 NPF-60D-48 NPF-60D-4 DC VOLTAGE CONSTANT CURRENT REGION RATED CURRENT RATED POWER 12V 7.2 ~ 12V
Environmental. Electrical Specifications at 25 O C E Output Constant Current
LED Optimized Drivers 40 Watt - CONSTANT VOLTAGE OR CONSTANT CURRENT LED DRIVER WITH Model: Environmental 40W Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : 40W
MVAB120 Series 120W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAB120 Series FEATURES ITE (2nd) and Medical 3rd ed. 1MOPP (primarysecondary) safety approved 120W compact high density 2" x 4" standard footprint High effi ciency up to 91% Universal
600W Single Output Switching Power Supply HLG-600H-xx0ADM series IP65 IP67. File Name:HLG-600H-SPEC
IP65 IP67 Ⅰ Ⅰ, { I I SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 9) DC VOLTAGE CONSTANT CURRENT REGION Note.4 6 ~12V RATED CURRENT RATED POWER RIPPLE & NOISE (max.) Note.2
Resilient 3000 EP3000AC48IN Rectifier 3000W Output at 48 58Vdc
Resilient 3000 EP3000AC48IN Rectifier 3000W Output at 48 58Vdc Product Description The Resilient 3000 is a high Efficiency, single phase, general purpose and ruggedized fan cooled rectifier for stand alone
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies.
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
MAJORSINE Power Inverter
MAJORSINE Power Inverter Product Features: 24, 48, 130 V 1 KVA/800 Watts Output 2 KVA/1600 Watts Output 100-120 VAC Range 208-240 VAC Range Standard 19 /23, Pure Sine Wave Output High Low EMI/RFI Emissions
60W Reliable Railway DC-DC Converter. RSD-60 series. File Name:RSD-60-SPEC
SPECIFICATION MODEL OUTPUT INPUT PROTECTION RSD-60G-3.3 RSD-60G-5 RSD-60G-12 RSD-60G-24 RSD-60L-3.3 RSD-60L-5 RSD-60L-12 RSD-60L-24 DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER 3.3V 0 ~ 39.6W 5V
OWA-60U series IP67. 60W Single Output Moistureproof Adaptor. File Name:OWA-60U-SPEC
IP67 Ⅱ Ⅱ SPECIFICATION MODEL OUTPUT INPUT OTHERS NOTE DC VOLTAGE CONSTANT CURRENT REGION RATED CURRENT RATED POWER A 4A 3A 2.A 2A 1.67A 60.12W 1.A 63W 1.2A 1.12A 60.48W RIPPLE & NOISE (max.) Note.2 1mVp-p
DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
02/11/2015
Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.
LPF-16 series. 16W Constant Voltage + Constant Current LED Driver IP30. File Name:LPF-16-SPEC
IP30 ~ P File Name:LPF-16-SPEC 16-05-11 SPECIFICATION MODEL OUTPUT INPUT PROTECTION OTHERS NOTE VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(Typ.) LEAKAGE CURRENT
02/11/2015
Emergency stop and safety guard monitoring 1 channel KNAC3-YS Part number 85103035 "Emergency stop" & "Gate monitoring" functions Single channel operation Security with redundancy and feedback circuit